www.bossaudio.com

CD RECEIVERS
CD Receiver w/Front 3.5mm Input
Seperate Bass, Treble, Balance, Fader Loudness, Stereo/Mono, Local/Distant RCA Output 4 x 40W Output MANUAL TUNING - NO PRESETS Detachable Front Panel w/3.5mm Input CD Mute / Track Repeat / Intro Scan 1 Bit D/A Converter / 8x Oversampling CD-R/CD-RW Compatible Preset EQ Response Curves

634CA 638UA

CD Receiver w/Front 3.5mm Input CD Receiver w/Front USB Input
Preset EQ Response Curves Seperate Bass, Treble, Balance, Fader Loudness, Stereo/Mono, Local/Distant 5 Volt RCA Output 4 x 50W Output Includes Wireless Remote
Detachable Front Panel w/3.5mm Input PLL Synthesized Tuner w/24 Presets CD Mute / Track Repeat / Intro Scan 1 Bit D/A Converter / 8x Oversampling ESP Anti-Skip Mechanism CD-R/CD-RW Compatible
CD Receiver w/Front USB Input
Preset EQ Response Curves Seperate Bass, Treble, Balance, Fader Loudness, Stereo/Mono, Local/Distant 5 Volt RCA Output 4 x 60W Output Includes Wireless Remote
Detach Front Panel w/USB, SD & 3.5mm Inputs PLL Synthesized Tuner w/24 Presets CD Mute / Track Repeat / Intro Scan 1 Bit D/A Converter / 8x Oversampling ESP Anti-Skip Mechanism MP3/CD-R/CD-RW Compatible w/ID3

815CA 820UA

MP3/CD-R/CD-RW Compatible w/ID3 Seperate Bass, Treble, Balance, Fader Loudness, Stereo/Mono, Local/Distant 5 Volt RCA Output 4 x 80W Output Includes Wireless Remote
Detachable Front Panel w/3.5mm Input PLL Synthesized Tuner w/24 Presets CD Mute / Track Repeat / Intro Scan 1 Bit D/A Converter / 8x Oversampling ESP Anti-Skip Mechanism
Seperate Bass, Treble, Balance, Fader Loudness, Stereo/Mono, Local/Distant 5 Volt RCA Output 4 x 60W Output Includes Wireless Remote ColorSpectrum Backlighting
Detach Front Panel w/USB & 3.5mm Inputs PLL Synthesized Tuner w/24 Presets CD Mute / Track Repeat / Intro Scan 1 Bit D/A Converter / 8x Oversampling ESP Anti-Skip Mechanism MP3/CD-R/CD-RW Compatible w/ID3

722CA 738UA

Preset EQ Response Curves Seperate Bass, Treble, Balance, Fader Loudness, Stereo/Mono, Local/Distant 5 Volt Front, Rear & Subwoofer RCA Outputs 4 x 50W Output (738UA: 4 x 60W) Includes Wireless Remote

835Ui 840UBi

CD Receiver w/iPod Control* CD Receiver w/iPod Control* & Bluetooth
Seperate Bass, Treble, Balance, Fader Loudness, Stereo/Mono, Local/Distant 5 Volt Front & Rear RCA Outputs 4 x 80W Output Includes Wireless Remote * iPod Control Requires IPC40 Cable
Detach Front Panel w/USB & 3.5mm Inputs PLL Synthesized Tuner w/24 Presets CD Mute / Track Repeat / Intro Scan 1 Bit D/A Converter / 8x Oversampling ESP Anti-Skip Mechanism MP3/CD-R/CD-RW Compatible

Last Updated 4/22/11

DIGITAL MEDIA RECEIVERS
Bluetooth Receiver w/iPod Docking Station
Loudness RCA Outputs 4 x 80W Output Includes Wireless Remote * This Unit Does NOT Play CDs iPod Docking Station w/Full iPod Control PLL Synthesized Tuner w/30 Presets Front Panel USB & 3.5mm Input Preset EQ Response Curves Seperate Bass, Treble, Balance, Fader

DOUBLE DIN CD RECEIVERS

MP3/CD-R/CD-RW Compatible w/ID3 Tag Seperate Bass, Treble, Balance, Fader Loudness, Stereo/Mono, Local/Distant 5 Volt RCA Output 4 x 80W Output Includes Wireless Remote Detachable Front Panel PLL Synthesized Tuner w/24 Presets Front Panel USB & 3.5mm Input CD Mute / Track Repeat / Intro Scan 1 Bit D/A Converter / 8x Oversampling ESP Anti-Skip Mechanism

865DBi

Bluetooth CD Receiver w/iPod Docking Station
MP3/CD/CD-RW Compatible w/ID3 Display Preset EQ Response Curves Seperate Bass, Treble, Balance, Fader Loudness, Stereo/Mono, Local/Distant 5 Volt Front & Rear RCA Outputs BassMax Subwoofer Output 4 x 80W Output Includes Wireless Remote
Bluetooth Enabled iPod Docking Station w/Full iPod Control Detachable Front Panel PLL Synthesized Tuner w/30 Presets Front Panel USB & 3.5mm Input CD Mute / Track Repeat / Intro Scan 1 Bit D/A Converter / 8x Oversampling ESP Anti-Skip Mechanism

SIGNAL PROCESSORS

AVA1210
7-BAND PREAMP EQUALIZER Volume, Fader, CD/AUX Button Subwoofer Output Subwoofer Level Control Night Illumination
SUBWOOFER CROSSOVER 50/90/180Hz Low Pass 12dB/Octave Slope +/- 12dB Bass Boost LED Power Indicator
2/3 WAY CROSSOVER Front/Rear/Sub Input & Output Selectable Crossover Frequencies 12dB/Octave Slope +/-18dB Bass Boost Remote Sub Level Control Subwoofer Phase Switch
BASS GENERATOR Remote Sub Level Control Parametric Bass Control Center Freq & Effect Range PFM Subsonic Filter Balanced Inputs 10 Volt Output

TWEETERS

TW12 TW17 TW25 TW30 BPT60 BPT80
Poly Dome Tweeters - Surface/Flush Mount - 200W Micro Dome Tweeters - Surface/Angle Mount - 200W 1" Silk Dome Tweeters - Surface/Flush/Angle Mount - 250W 3" Bullet Tweeter - Flush Mount - 250W Super Compression Tweeters - Flush Mount - 250W Super Compression Tweeters - Flush Mount - 350W
CHAOS EXXTREME AMPLIFIERS
CHAOS EXXTREME POWER AMPLIFIERS ARE DESIGNED TO DELIVER THE CLEAN POWER NEEDED TO BRING OUT THE BEST IN YOUR SPEAKERS. SYSTEM TWEAKING FEATURES INCLUDE VARIABLE GAIN CONTROLS, BUILT-IN LOW PASS CROSSOVERS, +18DB BASS BOOST AND REMOTE SUB LEVEL CONTROLS. THE CLASS D MONOBLOCK AMPS ARE DESIGNED TO DELIVER THE HIGH POWER LEVELS YOUR SUBWOOFERS CRAVE. ALL AMPS (excl. CX150 & CX350) FEATURE: Remote Subwoofer Level Control Variable Gain Control Input Sensitivity Selector Variable Low Pass Crossover Variable Bass Boost 0-18dB Power & Protection LEDs CLASS D AMPS ADD: Line Outs For System Building Variable 24db/Octave Subsonic Filter Phase Shift Selector Strapping Capability
Class D Monoblocks CX3500D 1 x 3500w MAX @ 1 CX2500D 1 x 2500w MAX @ 1
1 x 2200w MAX @ x 1200w RMS @ x 1800w MAX @ x 750w RMS @ 4
Class A/B MOSFET Monoblocks CX2000M 1 x 2000w MAX @ 2 CX1100M 1 x 1100w MAX @ 2
1 x 500w RMS @ x 250w RMS @ 4
2ch Amplifiers CXx 1250w MAX @ x 380w RMS @ 4 CXx 1000w MAX @ x 300w RMS @ 4 CXx 800w MAX @ x 220w RMS @ 4 CXx 400w MAX @ x 125w RMS @ 4 CXx 300w MAX @ x 110w RMS @ 4 CXx 200w MAX @ x 75w RMS @ 4 CXx 100w MAX @ x 50w RMS @ 4 NEW BOSS CHAOS AMPLIFIERS COMING SOON! 4ch Amplifiers CXx 500w MAX @ 2 CXx 400w MAX @ 2 CXx 200w MAX @ 2 CXx 100w MAX @ 2
4 x 200w RMS @ x 150w RMS @ x 75w RMS @ x 50w RMS @ 4
5ch Amplifiers CXx 300w + 1 x 600w MAX @ 2
4 x 120w + 1 x 200w RMS @ 4
CHAOS EXXTREME SUBWOOFERS
FEATURES: STAMPED STEEL BASKET, BLACK POLY INJECTION CONE, FOAM SURROUND, 2" HIGH TEMPERATURE VOICE COIL.

CX15 CX12 CX10 CX8

15" Single 4 Voice Coil Sub - 1000w / 500w 12" Single 4 Voice Coil Sub - 800w / 400w 10" Single 4 Voice Coil Sub - 600w / 300w 8" Single 4 Voice Coil Sub - 400w / 200w

FEATURES: STAMPED STEEL BASKET, BLACK POLY INJECTION CONE, BUTYL RUBBER SURROUND, DUAL 2" HIGH TEMPERATURE KAPTON VOICE COILS.
CX154DVC CX124DVC CX104DVC
15" Dual 4 Voice Coil Sub - 1800w / 900w 12" Dual 4 Voice Coil Sub - 1500w / 750w 10" Dual 4 Voice Coil Sub - 1200w / 600w
CHAOS EXXTREME LOUDSPEAKERS
ONE LOOK AND YOULL KNOW WHY THEY ARE CALLED CHAOS EXXTREME. THE RED METALLIC POLY INJECTION CONE DELIVERS CLEAR SOUND WHILE THE BUTYL RUBBER SURROUND PROVIDES SMOOTH RESPONSE & DURABILITY.
Component Loudspeakers CH6CK 6.5" Component Set

- 350W Peak

Coaxial Loudspeakers CH3220 3.5" 2-Way - 140W Peak CH4220 4" 2-Way - 200W Peak CH5520 5.25" 2-Way - 200W Peak CH6500 6.5" Slim Mount 2-Way - 200W Peak CH6520 6.5" 2-Way - 250W Peak CH6530 6.5" 3-Way - 300W Peak
CH4620 CH4630 CH4330 CH5720 CH5730 CH6920 CH6930 CH6950
4"x 6" 2-Way - 200W Peak 4"x 6" 3-Way - 250W Peak 4"x 10" 3-Way - 400W Peak 5"x 7" 2-Way - 225W Peak 5"x 7" 3-Way - 300W Peak 6"x 9" 2-Way - 350W Peak 6"x 9" 3-Way - 400W Peak 6"x 9" 5-Way - 600W Peak

RIOT AMPLIFIERS

YOUR FIRST VIEW OF THE RIOT SERIES MAY DECEIVE YOU. THE ELEGANT LINES ARE A TEXTBOOK EXERCISE IN MINIMALIST DESIGN. FROM THIS POINT ON, HOWEVER, ITS POWER AND REPRODUCTIVE AUTHENTICITIES WILL BE ANYTHING BUT MINIMAL. PERHAPS THE ONLY THING MORE EXTENSIVE THAN THE FEATURES SHOWCASED IS THE ENJOYMENT YOU'LL DERIVE FROM THEM. THIS IS ONLY ONE REASON BOSS AUDIO HAS LED THE WAY IN 12 VOLT ENTERTAINMENT FOR ALMOST A QUARTER OF A CENTURY. ALL AMPS FEATURE: Illuminated Logo Remote Subwoofer Level Control Variable Gain Control Input Sensitivity Selector Variable Low Pass Crossover Variable Bass Boost 0-18dB Power & Protection LEDs
Class D Monoblocks R3400D 1 x 3400w MAX @ 1 R2400D 1 x 2400w MAX @ 1
1 x 2000w MAX @ x 1050w RMS @ x 1600w MAX @ x 650w RMS @ 4
Class A/B MOSFET Monoblocks R2000M 1 x 2000w MAX @ 2 R1600M 1 x 1600w MAX @ 2 R1100M 1 x 1100w MAX @ 2 2ch Amplifiers R12002 R8002 R6002 R2002 R1002 4ch Amplifiers R3004 R1004
1 x 500w RMS @ x 350w RMS @ x 250w RMS @ 4
2 x 1200w MAX @ x 350w RMS @ x 800w MAX @ x 275w RMS @ x 600w MAX @ x 200w RMS @ x 200w MAX @ x 90w RMS @ x 100w MAX @ x 50w RMS @ 4
4 x 300w MAX @ x 110w RMS @ x 100w MAX @ x 50w RMS @ 4

PHANTOM AMPLIFIERS

PHANTOM POWER AMPLIFIERS ARE NEW FOR 2010. THIS LINE-UP IS GUARANTEED TO COVER ALL APPLICATIONS. FOUR AND TWO CHANNEL FULL RANGE MODELS WILL MATCH PERFECTLY WITH YOUR SPEAKER SYSTEM. MOSFET AMPLIFIERS DELIVER POWER TO SPARE WHILE BASS BOOST AND BUILT IN HIGH AND LOW PASS CROSSOVERS ALLOW YOU TO CUSTOMIZE YOUR CABIN TO YOUR TASTE. IF YOUR NEED IS ULTIMATE POWER, PHANTOM HAS BOTH CLASS D AND MOSFET MONO-BLOCK AMPS TO SATISFY ALL APPLICATIONS. ALL AMPS FEATURE: MOSFET Power Supply Remote Subwoofer Level Control Line & Speaker Level Inputs Variable Gain Control Input Sensitivity Selector Variable High Pass Crossover (Excl. Mono Amps) Variable Low Pass Crossover Variable Bass Boost 0-18dB Power & Protection LEDs CLASS D MONO AMPS ADD: Line Outs For System Building Variable Subsonic Filter Phase Shift Selector Strapping Capability

Class D Monoblocks PH5000D 1 x 5000w MAX @ 1 PH4000D 1 x 4000w MAX @ 1 PH3000D 1 x 3000w MAX @ 1
1 x 3500w MAX @ x 1800w RMS @ x 3000w MAX @ x 1600w RMS @ x 2200w MAX @ x 1200w RMS @ 4
Class A/B MOSFET Monoblocks PH2500M 1 x 2500w MAX @ 2 PH1500M 1 x 1500w MAX @ 2
1 x 1400w MAX @ x 700w MAX @ 4
2ch Amplifiers PH2.x 1500w MAX @ x 480w RMS @ 4 PH2.x 1000w MAX @ x 320w RMS @ 4 PH2.x 600w MAX @ x 230w RMS @ 4 PH2.x 500w MAX @ x 200w RMS @ 4 4ch Amplifiers PH4.x 600w MAX @ 2 PH4.x 400w MAX @ 2
4 x 240w RMS @ x 160w RMS @ 4

PHANTOM SUBWOOFERS

FEATURES: DIE CAST ALUMINUM BASKET, ELECTROPLATE INJECTION CONE, BUTYL RUBBER SURROUND, DUAL 2.5" HIGH TEMP VOICE COILS.

P128DC P108DC

12" Dual 4 Voice Coil Sub - 2400w / 1200w 10" Dual 4 Voice Coil Sub - 2200w / 1100w
FEATURES: STAMPED STEEL BASKET, POLY INJECTION CONE.

P156DVC P126DVC P106DVC

15" Dual 4 Voice Coil Sub - 2500w / 1250w 12" Dual 4 Voice Coil Sub - 2300w / 1150w 10" Dual 4 Voice Coil Sub - 2100w / 1050w
PHANTOM SHALLOW MOUNT SUBWOOFERS
FEATURES: SHALLOW MOUNT STAMPED BASKET, BLACK POLY MICA CONE, BUTYL RUBBER SURROUND, 2" HIGH TEMP ALUMINUM VOICE COILS.

D120FD D10F

12" Dual 4 Voice Coil Sub - 1000w / 500w 10" Single 4 Voice Coil Sub - 800w / 400w

PHANTOM LOUDSPEAKERS

PHANTOM LOUDSPEAKERS UTILIZE HIGH QUALITY INJECTION CONES WITH RUBBER SURROUNDS FOR TOP PERFORMANCE. A CUSTOM TOOLED BRIDGE HOUSES MIDRANGES AND TWEETERS FOR OUTSTANDING MID AND HIGH FREQUENCY RESPONSE.
Component Loudspeakers PC65.2C 6.5" Component Set

- 500W Peak

Coaxial Loudspeakers P45.4C 4" 4-Way - 250W Peak P55.4C 5.25" 4-Way - 300W Peak P65.4C 6.5" 4-Way - 400W Peak P69.4C 6"x 9" 4-Way - 800W Peak
Skull Series Loudspeakers SK652 6.5" 2-Way w/Music Illumination SK693 6"x 9" 3-Way w/Music Illumination

300W Peak - 600W Peak

$17.95 Pr $30.95

3@ $17.50 3@ $29.50

OUTCAST SUBWOOFERS
FEATURES: DIE CAST ALUMINUM FRAME, BLACK NON PRESSED PAPER CONE, OVERSIZED STITCHED FOAM SURROUND, 3" HIGH TEMPERATURE BAEISV VOICE COIL, 200OZ MAGNET STRUCTURE.

12" Subwoofer - 2000W / 1000W

OUTCAST LOUDSPEAKERS

OHC SPEAKERS ARE THE NO COMPROMISE APPROACH TO SOUND QUALITY. THE UNIQUE DIE CAST ALUMINUM FRAMES WILL MAKE A HIGH END STATEMENT IN YOUR SYSTEM. THE METALLIC ELECTROPLATE INJECTION CONES PROVIDE DURABILITY AND SUPERIOR SOUND QUALITY.
Component Loudspeakers OHC62CS 6.5" Component Set

- 600W Peak

Coaxial Loudspeakers OHC52 5.25" 2-Way - 350W Peak OHC63 6.5" 2-Way - 450W Peak OHC694 6"x 9" 4-Way - 900W Peak

AMPLIFIED ENCLOSURES

BASS900
8" LOW PROFILE AMPLIFIED SUBWOOFER Low Profile - 9.9" x 14" x 3" High & Low Level Inputs Remote Level Control Phase Selector Switch Low Pass & Subsonic Filters 0-12dB Bass Boost

BASS1500

10" LOW PROFILE AMPLIFIED SUBWOOFER Low Profile - 11.9" x 15.5" x 3" High & Low Level Inputs Remote Level Control Phase Selector Switch Low Pass & Subsonic Filters 0-12dB Bass Boost
12" 1200w AMPLIFIED SUBWOOFER Built In MOSFET Power Amplifier Remote Subwoofer Level Control 0-18dB Bass Boost 40Hz - 160Hz Crossover High & Low Level Inputs 14"w x 12"d x 14"h

MARINE CD RECEIVERS

MR1400W

Marine CD Receiver

Seperate Bass, Treble, Balance, Fader Preset EQ Response Curves Loudness, Stereo/Mono, Local/Distant 5 Volt Front & Rear RCA Outputs 4 x 50W Output Front Panel UV Coating Detach Front Panel w/USB & 3.5mm Inputs PLL Synthesized Tuner w/24 Presets CD Mute / Track Repeat / Intro Scan 1 Bit D/A Converter / 8x Oversampling ESP Anti-Skip Mechanism CD-R/CD-RW Compatible

MR1465W

Seperate Bass, Treble, Balance, Fader Preset EQ Response Curves Loudness, Stereo/Mono, Local/Distant 5 Volt RCA Output 4 x 60W Output Includes Wireless Remote
Front Panel UV Coating Detach Front Panel w/3.5mm Input PLL Synthesized Tuner w/24 Presets CD Mute / Track Repeat / Intro Scan 1 Bit D/A Converter / 8x Oversampling ESP Anti-Skip Mechanism MP3/CD-R/CD-RW Compatible

MR1520UA

MP3/CD-R/CD-RW Compatible Seperate Bass, Treble, Balance, Fader Preset EQ Response Curves Loudness, Stereo/Mono, Local/Distant 5 Volt Front & Rear RCA Outputs 4 x 50W Output Includes Wireless Remote
Full iPod Control (Requires IPC40 Cable) Front Panel UV Coating Detach Front Panel w/USB & 3.5mm Inputs PLL Synthesized Tuner w/24 Presets CD Mute / Track Repeat / Intro Scan 1 Bit D/A Converter / 8x Oversampling ESP Anti-Skip Mechanism

MR1560Di

Marine Digital Media Receiver w/iPod Dock
Front & Rear RCA Outputs 4 x 80W Output Includes Wireless Remote * This Unit Does NOT Play CDs
iPod Docking Station Full iPod Control Front Panel & PC Board UV Coating Detach Front Panel w/USB & 3.5mm Inputs PLL Synthesized Tuner w/30 Presets Seperate Bass, Treble, Balance, Fader Preset EQ Response Curves Loudness, Stereo/Mono, Local/Distant

MR1600W

Marine CD Receiver w/Wired Remote
CD-R/CD-RW Compatible Seperate Bass, Treble, Balance, Fader Preset EQ Response Curves Loudness, Stereo/Mono, Local/Distant Front, Rear & Subwoofer RCA Outputs 4 x 60W Output Includes Wired Remote (25' Extension: MREX25)
Front Panel UV Coating PCB With Conformal Coating Detach Front Panel w/3.5mm Input PLL Synthesized Tuner w/30 Presets CD Mute / Track Repeat / Intro Scan 1 Bit D/A Converter / 8x Oversampling ESP Anti-Skip Mechanism

MR1640W

Marine CD Receiver w/Weather Band
MP3/CD-R/CD-RW Compatible w/ID3 Tag Seperate Bass, Treble, Balance, Fader Preset EQ Response Curves Loudness, Stereo/Mono, Local/Distant Front, Rear & Subwoofer RCA Outputs 4 x 60W Output Includes Wired Remote (25' Extension: MREX25)
Front Panel UV Coating PCB With Conformal Coating Detach Front Panel w/3.5mm Input PLL Synthesized Tuner w/Weather Band CD Mute / Track Repeat / Intro Scan 1 Bit D/A Converter / 8x Oversampling ESP Anti-Skip Mechanism

MR2080W

1.5 DIN Marine CD Receiver w/Weather Band
MP3/CD-R/CD-RW Compatible w/ID3 Tag Seperate Bass, Treble, Balance, Fader Preset EQ Response Curves Loudness, Stereo/Mono, Local/Distant Front, Rear & Subwoofer RCA Outputs 4 x 80W Output Includes Wired Remote (25' Extension: MREX25)

MARINE AMPLIFIERS

ALL MR SERIES AMPLIFIERS FEATURE A UNIQUE RUBBER DOOR WHICH TIGHTLY SEALS CONTROL OPENINGS WHEN NOT IN USE. ALSO USES IN-LINE WEATHERPROOF CONNECTORS FOR ALL INPUT & OUTPUT CONNECTIONS WHICH ARE RUN THROUGH GROMMETED OPENINGS IN END PANELS.

MARINE LOUDSPEAKERS

MARINE ENCLOSURES

ROCKER MR60W

6.5" 2-Way Marine Speaker - 200W Peak

(SOLD AS PAIR)

3-Way Waketower Speakers - 1000W Peak 8" Midbass, 5.25" Midrange, 1" Bullet Tweeter (2) Fully Marinized Enclosures
6" x 9" 2-Way Marine Speaker - 350W Peak
2 x 400 @ x 125 @ 4 7.4" x 2.25" x 12.75" w/Remote Sub Level Control

MR1000

MRWT65
2-Way Waketower Speaker - 350W Peak 6.5" Mylar Midrange, 1" Mylar Dome Tweeter Fully Marinized Enclosure
6.5" 2-Way Marine Speaker - 250W Peak

MARINE PA CONTROLLER

PUBLIC ACCESS SYSTEM CONTROLLER WITH MICROPHONE, CROSSOVER & REMOTE SUBWOOFER LEVEL CONTROL. THIS UNIVERSAL SYSTEM CAN BE USED AS A FRONT END FOR ANY MARINE OR CAR AUDIO AMPLIFIER, TURNING IT INTO A FULL FEATURED PUBLIC ADDRESS SYSTEM.
6" x 9" 2-Way Marine Speaker - 400W Peak

MRWT69W

4-Way Waketower Speaker - 550W Peak 6" x 9" Midrange, 2.5" Midrange, (2) 1" Mylar Tweeter Fully Marinized Enclosure

MR752C

7.5" 2-Way Marine Speaker - 400W Peak

MARINE SUBWOOFERS

MR12 MR30.4

MR20PA

Includes Wired Microphone 4ch Input, 4ch Output With 2-Way Crossover
2-Way Marine Box Speaker - 100W Peak 4 or 8 Terminals
4 or 8 2-Way Marine Box Speaker - 200W Peak 5.25" Midbass, 1" Tweeter
10" 4 Marine Subwoofer - 600W Peak
12" 4 Marine Subwoofer - 800W Peak

8 Description of QVisRT

Description of QVisRT
QVisRT is the abbreviation of the QVis Runtime. This means that QVis is used for creating and changing the working surface and functions for visualizing. The project file (project.bin) is created with QVis. QVisRT is used on the target system (e.g. CX100, netX), which opens and uses this project file. QVis is the development tool and QVisRT is the running time system of the visualizing package. QVisRT runs on the following systems: - QVisRT.exe for Windows CE (netX, CX1000, CX9000, iPAQ) - QVisRT.exe for Windows NT / 2000 / XP
Description of the QClientTC 9
Description of the QClientTC
The QClientTC permits the linkage of QVis to a TwinCat controls. QClientTC is loaded from QVisRT.exe in the form of a DLL. QVis is designed for WinNT/2000/XP (PC) and for WinCE (CX1000, CX9000, iPAQ) and provides the following possibilities.
SPS: CX1000 or CX9000, QVisRT: local (CX1000 or CX9000)
1. Create a project with QVis generate project.bin and copy to CX1000 or CX9000
3. Start QVisRT.exe on CX1000 or CX9000
Development computer (Windows XP)

CX1000 or CX9000

QVisRT.exe

QClientTC.dll

project.bin
SPS: PC, QVisRT: local (PC)
1. Create a project with QVis 2. Generate project.bin and copy on to the PC (can also be the same)
3. Start QVisRT.exe on the PC
10 Description of the QClientTC
SPS: PC, CX1000 oder CX9000, QVisRT: Remote operation (PC or iPAQ)
3. Start QVisRT.exe on the remote operation computer
Remote operation (PC or iPAQ)

PC, CX1000 or CX9000

QVisRT and QClientTC - Installation 11
QVisRT and QClientTC - Installation

Project settings

'Settings).
Create a project with QVis (see QVis documentation). Make sure that the 'TwinCAT type of control is set (QVis menu: 'Edit'
Entries for Net ID and Port are not absolutely necessary) If no entries are made for Net ID and Port then these are read from the registry at the time of running whereby the standard setting for Net ID is 'local and for the Port is 801. These registry entries can naturally also be adapted.
12 QVisRT and QClientTC - Installation

When the alarm history was deleted and QVisRT was restarted Error correction (V 2.03.11) before a new alarm occurred, then the old alarm history (before the deletion) was shown again. For a color surround for colors 2 and 3 and the controls by an additional variable, the change in color was only shown with a change of the value. When clicking on an empty alarm list, the QVisRT was ended (program crash). When clicking on an empty alarm list Position open and Acknowledge alarm was activated, the QVisRT was ended (program crash). The alarm list can be configured so that further scrolling is automatic. Interval is freely configurable in QVisRT Error correction (V 2.04.00)
Error correction (V 2.04.00) Error correction (V 2.04.00)

Extension (V 2.04.01)

48 QVis Versions directory
Objects of the pages can be searched for and replaced. In this way Extension (V 2.04.03) changes of objects can be updated in the pages. Depiction of pointer instruments Depiction of curves for WinNT/2k/XP and Linux. Size conversion for objects and pages via project tree view. When exporting alarm history and trend, Unicode characters (larger than 256) are output correctly. Only one QVis project can be opened and an opened QVis project is protected against a second opening. If, during simulation an empty list was clicked, a project crash could occur. Improvement of the error messaging when no variables were allocated to objects or elements in order to find the position better. Exit-QVis as command via variable interface (TwinCAT). Example for HTML help. Make export of alarm history via command possible. Extension (V 2.04.03) Extension (V 2.04.03) Extension (V 2.04.04) Error correction (V 2.04.05) Improvement (V V2.04.06) Error correction (V 2.04.06) Improvement (V 2.04.06) Extension (V 2.04.06) Improvement (V 2.04.06) Extension (V 2.04.06)
For password-protected lists, carrying out the action after the entry Improvement (V 2.04.06) of the password. With printout under NT/2k/XP and more than 256 colors do not use Improvement (V 2.04.06) a fixed grey palette for printing. For alarm list, the help mode can be automatically turned on per configuration. For password-protected lists, carrying out the action also after the incorrect entry of the password. In the Windows version allow the background to be drawn automatically. In the Windows version, carry out the conversion to Unicode characters (was only implemented under Unix). Extension (V 2.04.06) Improvement (V 2.04.07) Error correction (V 2.04.07) Error correction (V 2.04.07)
When printing recipe lists, an incorrect column title was printed out Error correction (V 2.04.08) for the description. When printing pages per command a program crash occurred in the choice of a different page than the depicted one. When the trend data were deleted and an export made, then all entries (also without values and old ones) were exported. Error correction (V 2.04.08) Error correction (V 2.04.09)

The device has indicated that cleaning is required before further operations are ERROR_DEVICE_REQUIRES_CLEANING attempted. The device has indicated that its door is open. The device is not connected. ERROR_DEVICE_DOOR_OPEN ERROR_DEVICE_NOT_CONNECTED
Microsoft Windows 2000/NT/XP (SDK) System Errors 61

1217 1218

Element not found. There was no match for the specified key in the index. The property set specified does not exist on the object. The point passed to GetMouseMovePointsEx is not in the buffer. The tracking (workstation) service is not running. The Volume ID could not be found. Unable to remove the file to be replaced. Unable to move the replacement file to the file to be replaced. The file to be replaced has retained its original name. Unable to move the replacement file to the file to be replaced. The file to be replaced has been renamed using the backup name. The volume change journal is being deleted. The volume change journal is not active. A file was found, but it may not be the correct file. The journal entry has been deleted from the journal. The specified device name is invalid. The device is not currently connected but it is a remembered connection. The local device name has a remembered connection to another network resource. No network provider accepted the given network path. The specified network provider name is invalid. Unable to open the network connection profile. The network connection profile is corrupted. Cannot enumerate a noncontainer. An extended error has occurred. The format of the specified group name is invalid. The format of the specified computer name is invalid. The format of the specified event name is invalid. The format of the specified domain name is invalid. The format of the specified service name is invalid. The format of the specified network name is invalid. The format of the specified share name is invalid. The format of the specified password is invalid. The format of the specified message name is invalid. The format of the specified message destination is invalid.

Microsoft Windows 2000/NT/XP (SDK) System Errors 63

1259 1260

An attempt was made to perform an initialization operation when initialization has already been completed. No more local devices. The specified site does not exist. A domain controller with the specified name already exists. This operation is supported only when you are connected to the server. The group policy framework should call the extension even if there are no changes. The specified user does not have a valid profile. This operation is not supported on a Microsoft Small Business Server. The server machine is shutting down. The remote system is not available. For information about network troubleshooting, see Windows Help. The security identifier provided is not from an account domain. The security identifier provided does not have a domain component. AppHelp dialog canceled thus preventing the application from starting. Windows cannot open this program because it has been prevented by a software restriction policy. For more information, open Event Viewer or contact your system administrator. A program attempt to use an invalid registry value. Normally caused by an uninitialized registry. This error is Itanium specific. The share is currently offline or does not exist.
ERROR_ALREADY_INITIALIZED ERROR_NO_MORE_DEVICES ERROR_NO_SUCH_SITE ERROR_DOMAIN_CONTROLLER_EXISTS ERROR_ONLY_IF_CONNECTED ERROR_OVERRIDE_NOCHANGES ERROR_BAD_USER_PROFILE ERROR_NOT_SUPPORTED_ON_SBS ERROR_SERVER_SHUTDOWN_IN_PROGRESS ERROR_HOST_DOWN ERROR_NON_ACCOUNT_SID ERROR_NON_DOMAIN_SID ERROR_APPHELP_BLOCK ERROR_ACCESS_DISABLED_BY_POLICY
ERROR_REG_NAT_CONSUMPTION ERROR_CSCSHARE_OFFLINE
The kerberos protocol encountered an error while validating the KDC certificate ERROR_PKINIT_FAILURE during smartcard logon. The kerberos protocol encountered an error while attempting to utilize the smartcard subsystem. ERROR_SMARTCARD_SUBSYSTEM_FAILURE
The system detected a possible attempt to compromise security. Please ensure ERROR_DOWNGRADE_DETECTED that you can contact the server that authenticated you. The smartcard certificate used for authentication has been revoked. Please contact your system administrator. There may be additional information in the event log. SEC_E_SMARTCARD_CERT_REVOKED

The password is too complex to be converted to a LAN Manager password. The ERROR_NULL_LM_PASSWORD LAN Manager password returned is a NULL string. The revision level is unknown. Indicates two revision levels are incompatible. This security ID may not be assigned as the owner of this object. This security ID may not be assigned as the primary group of an object. An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client. The group may not be disabled. There are currently no logon servers available to service the logon request. A specified logon session does not exist. It may already have been terminated. A specified privilege does not exist. A required privilege is not held by the client. The name provided is not a properly formed account name. The specified user already exists. The specified user does not exist. The specified group already exists. The specified group does not exist. ERROR_UNKNOWN_REVISION ERROR_REVISION_MISMATCH ERROR_INVALID_OWNER ERROR_INVALID_PRIMARY_GROUP ERROR_NO_IMPERSONATION_TOKEN ERROR_CANT_DISABLE_MANDATORY ERROR_NO_LOGON_SERVERS ERROR_NO_SUCH_LOGON_SESSION ERROR_NO_SUCH_PRIVILEGE ERROR_PRIVILEGE_NOT_HELD ERROR_INVALID_ACCOUNT_NAME ERROR_USER_EXISTS ERROR_NO_SUCH_USER ERROR_GROUP_EXISTS ERROR_NO_SUCH_GROUP
Either the specified user account is already a member of the specified group, or ERROR_MEMBER_IN_GROUP the specified group cannot be deleted because it contains a member. Copyright Hilscher Swiss GmbH Oi:QVISRT#01.0EN
Microsoft Windows 2000/NT/XP (SDK) System Errors 65

1350 1351

The specified user account is not a member of the specified group account. The last remaining administration account cannot be disabled or deleted. Unable to update the password. The value provided as the current password is incorrect. Unable to update the password. The value provided for the new password contains values that are not allowed in passwords.
ERROR_MEMBER_NOT_IN_GROUP ERROR_LAST_ADMIN ERROR_WRONG_PASSWORD ERROR_ILL_FORMED_PASSWORD
Unable to update the password. The value provided for the new password does ERROR_PASSWORD_RESTRICTION not meet the length, complexity, or history requirement of the domain. Logon failure: unknown user name or bad password. Logon failure: user account restriction. Possible reasons are blank passwords not allowed, logon hour restrictions, or a policy restriction has been enforced. Logon failure: account logon time restriction violation. Logon failure: user not allowed to log on to this computer. Logon failure: the specified account password has expired. Logon failure: account currently disabled. No mapping between account names and security IDs was done. Too many local user identifiers (LUIDs) were requested at one time. No more local user identifiers (LUIDs) are available. The sub-authority part of a security ID is invalid for this particular use. The access control list (ACL) structure is invalid. The security ID structure is invalid. The security descriptor structure is invalid. The inherited access control list (ACL) or access control entry (ACE) could not be built. The server is currently disabled. The server is currently enabled. The value provided was an invalid value for an identifier authority. No more memory is available for security information updates. The specified attributes are invalid, or incompatible with the attributes for the group as a whole. Either a required impersonation level was not provided, or the provided impersonation level is invalid. Cannot open an anonymous level security token. The validation information class requested was invalid. The type of the token is inappropriate for its attempted use. Unable to perform a security operation on an object that has no associated security. Configuration information could not be read from the domain controller, either because the machine is unavailable, or access has been denied. ERROR_LOGON_FAILURE ERROR_ACCOUNT_RESTRICTION ERROR_INVALID_LOGON_HOURS ERROR_INVALID_WORKSTATION ERROR_PASSWORD_EXPIRED ERROR_ACCOUNT_DISABLED ERROR_NONE_MAPPED ERROR_TOO_MANY_LUIDS_REQUESTED ERROR_LUIDS_EXHAUSTED ERROR_INVALID_SUB_AUTHORITY ERROR_INVALID_ACL ERROR_INVALID_SID ERROR_INVALID_SECURITY_DESCR ERROR_BAD_INHERITANCE_ACL ERROR_SERVER_DISABLED ERROR_SERVER_NOT_DISABLED ERROR_INVALID_ID_AUTHORITY ERROR_ALLOTTED_SPACE_EXCEEDED ERROR_INVALID_GROUP_ATTRIBUTES ERROR_BAD_IMPERSONATION_LEVEL ERROR_CANT_OPEN_ANONYMOUS ERROR_BAD_VALIDATION_CLASS ERROR_BAD_TOKEN_TYPE ERROR_NO_SECURITY_ON_OBJECT ERROR_CANT_ACCESS_DOMAIN_INFO

Microsoft Windows 2000/NT/XP (SDK) System Errors 75
Thread is not canceled. Invalid operation on the encoding/decoding handle. Incompatible version of the serializing package. Incompatible version of the RPC stub. The RPC pipe object is invalid or corrupted. An invalid operation was attempted on an RPC pipe object. Unsupported RPC pipe version. The group member was not found. The endpoint mapper database entry could not be created. The object universal unique identifier (UUID) is the null UUID. The specified time is invalid. The specified form name is invalid. The specified form size is invalid. The specified printer handle is already being waited on The specified printer has been deleted. The state of the printer is invalid. The user's password must be changed before logging on the first time. Could not find the domain controller for this domain. The referenced account is currently locked out and may not be logged on to. The object exporter specified was not found. The object specified was not found. The object resolver set specified was not found. Some data remains to be sent in the request buffer. Invalid asynchronous remote procedure call handle. Invalid asynchronous RPC call handle for this operation. The RPC pipe object has already been closed. The RPC call completed before all pipes were processed. No more data is available from the RPC pipe. No site name is available for this machine. The file cannot be accessed by the system. The name of the file cannot be resolved by the system. The entry is not of the expected type. Not all object UUIDs could be exported to the specified entry. Interface could not be exported to the specified entry. The specified profile entry could not be added.
RPC_S_NOT_CANCELLED RPC_X_INVALID_ES_ACTION RPC_X_WRONG_ES_VERSION RPC_X_WRONG_STUB_VERSION RPC_X_INVALID_PIPE_OBJECT RPC_X_WRONG_PIPE_ORDER RPC_X_WRONG_PIPE_VERSION RPC_S_GROUP_MEMBER_NOT_FOUND EPT_S_CANT_CREATE RPC_S_INVALID_OBJECT ERROR_INVALID_TIME ERROR_INVALID_FORM_NAME ERROR_INVALID_FORM_SIZE ERROR_ALREADY_WAITING ERROR_PRINTER_DELETED ERROR_INVALID_PRINTER_STATE ERROR_PASSWORD_MUST_CHANGE ERROR_DOMAIN_CONTROLLER_NOT_FOUND ERROR_ACCOUNT_LOCKED_OUT OR_INVALID_OXID OR_INVALID_OID OR_INVALID_SET RPC_S_SEND_INCOMPLETE RPC_S_INVALID_ASYNC_HANDLE RPC_S_INVALID_ASYNC_CALL RPC_X_PIPE_CLOSED RPC_X_PIPE_DISCIPLINE_ERROR RPC_X_PIPE_EMPTY ERROR_NO_SITENAME ERROR_CANT_ACCESS_FILE ERROR_CANT_RESOLVE_FILENAME RPC_S_ENTRY_TYPE_MISMATCH RPC_S_NOT_ALL_OBJS_EXPORTED RPC_S_INTERFACE_NOT_EXPORTED RPC_S_PROFILE_NOT_ADDED
76 Microsoft Windows 2000/NT/XP (SDK) System Errors

92 Microsoft Windows 2000/NT/XP (SDK) System Errors
The modification was not permitted for security reasons. The operation cannot replace the hidden record. The hierarchy file is invalid. The attempt to build the hierarchy table failed. The directory configuration parameter is missing from the registry. The attempt to count the address book indices failed. The allocation of the hierarchy table failed. The directory service encountered an internal failure. The directory service encountered an unknown failure. A root object requires a class of 'top'. This directory server is shutting down, and cannot take ownership of new floating single-master operation roles. The directory service is missing mandatory configuration information, and is unable to determine the ownership of floating single-master operation roles. The directory service was unable to transfer ownership of one or more floating single-master operation roles to other servers. The replication operation failed. An invalid parameter was specified for this replication operation. The directory service is too busy to complete the replication operation at this time. The distinguished name specified for this replication operation is invalid. The naming context specified for this replication operation is invalid. The distinguished name specified for this replication operation already exists. The replication system encountered an internal error. The replication operation encountered a database inconsistency. The server specified for this replication operation could not be contacted. The replication operation encountered an object with an invalid instance type. The replication operation failed to allocate memory. The replication operation encountered an error with the mail system. The replication reference information for the target server already exists. The replication reference information for the target server does not exist. The naming context cannot be removed because it is replicated to another server. The replication operation encountered a database error.
ERROR_DS_SECURITY_ILLEGAL_MODIFY ERROR_DS_CANT_REPLACE_HIDDEN_REC ERROR_DS_BAD_HIERARCHY_FILE ERROR_DS_BUILD_HIERARCHY_TABLE_FAILED ERROR_DS_CONFIG_PARAM_MISSING ERROR_DS_COUNTING_AB_INDICES_FAILED ERROR_DS_HIERARCHY_TABLE_MALLOC_FAIL ED ERROR_DS_INTERNAL_FAILURE ERROR_DS_UNKNOWN_ERROR ERROR_DS_ROOT_REQUIRES_CLASS_TOP ERROR_DS_REFUSING_FSMO_ROLES ERROR_DS_MISSING_FSMO_SETTINGS ERROR_DS_UNABLE_TO_SURRENDER_ROLES ERROR_DS_DRA_GENERIC ERROR_DS_DRA_INVALID_PARAMETER ERROR_DS_DRA_BUSY ERROR_DS_DRA_BAD_DN ERROR_DS_DRA_BAD_NC ERROR_DS_DRA_DN_EXISTS ERROR_DS_DRA_INTERNAL_ERROR ERROR_DS_DRA_INCONSISTENT_DIT ERROR_DS_DRA_CONNECTION_FAILED ERROR_DS_DRA_BAD_INSTANCE_TYPE ERROR_DS_DRA_OUT_OF_MEM ERROR_DS_DRA_MAIL_PROBLEM ERROR_DS_DRA_REF_ALREADY_EXISTS ERROR_DS_DRA_REF_NOT_FOUND ERROR_DS_DRA_OBJ_IS_REP_SOURCE ERROR_DS_DRA_DB_ERROR

9010 9016

The Active Directory detected an Active Directory child partition below the requested new partition name. The Active Directory's partition hierarchy must be ERROR_DS_EXISTING_AD_CHILD_NC created in a top-down method. DNS server unable to interpret format. DNS server failure. DNS name does not exist. DNS request not supported by name server. DNS operation refused. DNS name that ought not exist, does exist. DNS RR set that ought not exist, does exist. DNS RR set that ought to exist, does not exist. DNS server not authoritative for zone. DNS name in update or pre-req. is not in zone. DNS signature failed to verify. DNS_ERROR_RCODE_FORMAT_ERROR DNS_ERROR_RCODE_SERVER_FAILURE DNS_ERROR_RCODE_NAME_ERROR DNS_ERROR_RCODE_NOT_IMPLEMENTED DNS_ERROR_RCODE_REFUSED DNS_ERROR_RCODE_YXDOMAIN DNS_ERROR_RCODE_YXRRSET DNS_ERROR_RCODE_NXRRSET DNS_ERROR_RCODE_NOTAUTH DNS_ERROR_RCODE_NOTZONE DNS_ERROR_RCODE_BADSIG
100 Microsoft Windows 2000/NT/XP (SDK) System Errors
DNS bad key. DNS signature validity expired. No records found for given DNS query. Bad DNS packet. No DNS packet. DNS error, check rcode. Unsecured DNS packet. Invalid DNS type. Invalid IP address. Invalid property. Try DNS operation again later. Record for given name and type is not unique. DNS name does not comply with RFC specifications. DNS name is a fully-qualified DNS name. DNS name is dotted (multi-label). DNS name is a single-part name. DSN name contains an invalid character. DNS name is entirely numeric. The operation requested is not permitted on a DNS root server. The record could not be created because this part of the DNS namespace has been delegated to another server. The DNS server could not find a set of root hints. The DNS server found root hints but they were not consistent across all adapters. DNS zone does not exist. DNS zone information not available. Invalid operation for DNS zone. Invalid DNS zone configuration. DNS zone has no start of authority (SOA) record. DNS zone has no name server (NS) record. DNS zone is locked. DNS zone creation failed. DNS zone already exists. DNS automatic zone already exists. Invalid DNS zone type.
DNS_ERROR_RCODE_BADKEY DNS_ERROR_RCODE_BADTIME DNS_INFO_NO_RECORDS DNS_ERROR_BAD_PACKET DNS_ERROR_NO_PACKET DNS_ERROR_RCODE DNS_ERROR_UNSECURE_PACKET DNS_ERROR_INVALID_TYPE DNS_ERROR_INVALID_IP_ADDRESS DNS_ERROR_INVALID_PROPERTY DNS_ERROR_TRY_AGAIN_LATER DNS_ERROR_NOT_UNIQUE DNS_ERROR_NON_RFC_NAME DNS_STATUS_FQDN DNS_STATUS_DOTTED_NAME DNS_STATUS_SINGLE_PART_NAME DNS_ERROR_INVALID_NAME_CHAR DNS_ERROR_NUMERIC_NAME DNS_ERROR_NOT_ALLOWED_ON_ROOT_SERV ER DNS_ERROR_NOT_ALLOWED_UNDER_DELEGA TION DNS_ERROR_CANNOT_FIND_ROOT_HINTS DNS_ERROR_INCONSISTENT_ROOT_HINTS DNS_ERROR_ZONE_DOES_NOT_EXIST DNS_ERROR_NO_ZONE_INFO DNS_ERROR_INVALID_ZONE_OPERATION DNS_ERROR_ZONE_CONFIGURATION_ERROR DNS_ERROR_ZONE_HAS_NO_SOA_RECORD DNS_ERROR_ZONE_HAS_NO_NS_RECORDS DNS_ERROR_ZONE_LOCKED DNS_ERROR_ZONE_CREATION_FAILED DNS_ERROR_ZONE_ALREADY_EXISTS DNS_ERROR_AUTOZONE_ALREADY_EXISTS DNS_ERROR_INVALID_ZONE_TYPE

Microsoft Windows 2000/NT/XP (SDK) System Errors 101
Secondary DNS zone requires master IP address. DNS zone not secondary. Need secondary IP address. WINS initialization failed. Need WINS servers. NBTSTAT initialization call failed. Invalid delete of start of authority (SOA) A conditional forwarding zone already exists for that name. This zone must be configured with one or more master DNS server IP addresses. The operation cannot be performed because this zone is shutdown. Primary DNS zone requires data file. Invalid data file name for DNS zone. Failed to open data file for DNS zone. Failed to write data file for DNS zone. Failure while reading data file for DNS zone. DNS record does not exist. DNS record format error. Node creation failure in DNS. Unknown DNS record type. DNS record timed out. Name not in DNS zone. CNAME loop detected. Node is a CNAME DNS record. A CNAME record already exists for given name. Record only at DNS zone root. DNS record already exists. Secondary DNS zone data error. Could not create DNS cache data. DNS name does not exist. Could not create pointer (PTR) record. DNS domain was undeleted. The directory service is unavailable. DNS zone already exists in the directory service.
DNS_ERROR_SECONDARY_REQUIRES_MASTE R_IP DNS_ERROR_ZONE_NOT_SECONDARY DNS_ERROR_NEED_SECONDARY_ADDRESSES DNS_ERROR_WINS_INIT_FAILED DNS_ERROR_NEED_WINS_SERVERS DNS_ERROR_NBSTAT_INIT_FAILED DNS_ERROR_SOA_DELETE_INVALID DNS_ERROR_FORWARDER_ALREADY_EXISTS DNS_ERROR_ZONE_REQUIRES_MASTER_IP DNS_ERROR_ZONE_IS_SHUTDOWN DNS_ERROR_PRIMARY_REQUIRES_DATAFILE DNS_ERROR_INVALID_DATAFILE_NAME DNS_ERROR_DATAFILE_OPEN_FAILURE DNS_ERROR_FILE_WRITEBACK_FAILED DNS_ERROR_DATAFILE_PARSING DNS_ERROR_RECORD_DOES_NOT_EXIST DNS_ERROR_RECORD_FORMAT DNS_ERROR_NODE_CREATION_FAILED DNS_ERROR_UNKNOWN_RECORD_TYPE DNS_ERROR_RECORD_TIMED_OUT DNS_ERROR_NAME_NOT_IN_ZONE DNS_ERROR_CNAME_LOOP DNS_ERROR_NODE_IS_CNAME DNS_ERROR_CNAME_COLLISION DNS_ERROR_RECORD_ONLY_AT_ZONE_ROOT DNS_ERROR_RECORD_ALREADY_EXISTS DNS_ERROR_SECONDARY_DATA DNS_ERROR_NO_CREATE_CACHE_DATA DNS_ERROR_NAME_DOES_NOT_EXIST DNS_WARNING_PTR_CREATE_FAILED DNS_WARNING_DOMAIN_UNDELETED DNS_ERROR_DS_UNAVAILABLE DNS_ERROR_DS_ZONE_ALREADY_EXISTS
102 Microsoft Windows 2000/NT/XP (SDK) System Errors

10039 10040

DNS server not creating or reading the boot file for the directory service integrated DNS zone. DNS AXFR (zone transfer) complete. DNS zone transfer failed. Added local WINS server. Secure update call needs to continue update request. TCP/IP network protocol not installed. No DNS servers configured for local system. The specified directory partition does not exist. The specified directory partition already exists. The DNS server is not enlisted in the specified directory partition. The DNS server is already enlisted in the specified directory partition. The directory partition is not available at this time. Please wait a few minutes and try again. A blocking operation was interrupted by a call to WSACancelBlockingCall. The file handle supplied is not valid. An attempt was made to access a socket in a way forbidden by its access permissions. The system detected an invalid pointer address in attempting to use a pointer argument in a call. An invalid argument was supplied. Too many open sockets. A non-blocking socket operation could not be completed immediately. A blocking operation is currently executing. An operation was attempted on a non-blocking socket that already had an operation in progress. An operation was attempted on something that is not a socket. A required address was omitted from an operation on a socket.

106 Microsoft Windows 2000/NT/XP (SDK) System Errors
The transport filter is pending deletion. The tunnel filter is pending deletion. The Main Mode policy is pending deletion. The Main Mode authentication bundle is pending deletion. The Quick Mode policy is pending deletion.
ERROR_IPSEC_TRANSPORT_FILTER_PENDING _DELETION ERROR_IPSEC_TUNNEL_FILTER_PENDING_DEL ETION ERROR_IPSEC_MM_POLICY_PENDING_DELETI ON ERROR_IPSEC_MM_AUTH_PENDING_DELETION ERROR_IPSEC_QM_POLICY_PENDING_DELETI ON
The Main Mode policy was successfully added, but some of the requested offers WARNING_IPSEC_MM_POLICY_PRUNED are not supported. The Quick Mode policy was successfully added, but some of the requested offers are not supported. IKE authentication credentials are unacceptable. IKE security attributes are unacceptable. IKE Negotiation in progress. General processing error. Negotiation timed out. IKE failed to find valid machine certificate. IKE SA deleted by peer before establishment completed. IKE SA deleted before establishment completed. Negotiation request sat in Queue too long. Negotiation request sat in Queue too long. Negotiation request sat in Queue too long. Negotiation request sat in Queue too long. No response from peer. Negotiation took too long. Negotiation took too long. Unknown error occurred. Certificate Revocation Check failed. Invalid certificate key usage. Invalid certificate type. No private key associated with machine certificate. Failure in Diffie-Helman computation. Invalid header. No policy configured. Failed to verify signature. WARNING_IPSEC_QM_POLICY_PRUNED ERROR_IPSEC_IKE_AUTH_FAIL ERROR_IPSEC_IKE_ATTRIB_FAIL ERROR_IPSEC_IKE_NEGOTIATION_PENDING ERROR_IPSEC_IKE_GENERAL_PROCESSING_E RROR ERROR_IPSEC_IKE_TIMED_OUT ERROR_IPSEC_IKE_NO_CERT ERROR_IPSEC_IKE_SA_DELETED ERROR_IPSEC_IKE_SA_REAPED ERROR_IPSEC_IKE_MM_ACQUIRE_DROP ERROR_IPSEC_IKE_QM_ACQUIRE_DROP ERROR_IPSEC_IKE_QUEUE_DROP_MM ERROR_IPSEC_IKE_QUEUE_DROP_NO_MM ERROR_IPSEC_IKE_DROP_NO_RESPONSE ERROR_IPSEC_IKE_MM_DELAY_DROP ERROR_IPSEC_IKE_QM_DELAY_DROP ERROR_IPSEC_IKE_ERROR ERROR_IPSEC_IKE_CRL_FAILED ERROR_IPSEC_IKE_INVALID_KEY_USAGE ERROR_IPSEC_IKE_INVALID_CERT_TYPE ERROR_IPSEC_IKE_NO_PRIVATE_KEY ERROR_IPSEC_IKE_DH_FAIL ERROR_IPSEC_IKE_INVALID_HEADER ERROR_IPSEC_IKE_NO_POLICY ERROR_IPSEC_IKE_INVALID_SIGNATURE
Microsoft Windows 2000/NT/XP (SDK) System Errors 107

13853 13854

Failed to authenticate using Kerberos. Peer's certificate did not have a public key. Error processing error payload. Error processing SA payload. Error processing Proposal payload. Error processing Transform payload. Error processing KE payload. Error processing ID payload. Error processing Cert payload. Error processing Certificate Request payload. Error processing Hash payload. Error processing Signature payload. Error processing Nonce payload. Error processing Notify payload. Error processing Delete Payload. Error processing VendorId payload. Invalid payload received. Soft SA loaded. Soft SA torn down. Invalid cookie received. Peer failed to send valid machine certificate. Certification Revocation check of peer's certificate failed. New policy invalidated SAs formed with old policy. There is no available Main Mode IKE policy. Failed to enabled TCB privilege.**** Failed to load SECURITY.DLL. Failed to obtain security function table dispatch address from SSPI. Failed to query Kerberos package to obtain max token size.

Microsoft Windows CE System Errors 121 ERROR_INVALID_COMPUTERNAME ERROR_INVALID_EVENTNAME ERROR_INVALID_DOMAINNAME ERROR_INVALID_SERVICENAME ERROR_INVALID_NETNAME ERROR_INVALID_SHARENAME ERROR_INVALID_PASSWORDNAME ERROR_INVALID_MESSAGENAME ERROR_INVALID_MESSAGEDEST ERROR_SESSION_CREDENTIAL_CONFLICT
The format of the specified computer name is invalid. The format of the specified event name is invalid. The format of the specified domain name is invalid. The format of the specified service name is invalid. The format of the specified network name is invalid. The format of the specified share name is invalid. The format of the specified password is invalid. The format of the specified message name is invalid. The format of the specified message destination is invalid. The credentials supplied conflict with an existing set of credentials.
An attempt was made to establish a session to a network server, but there ERROR_REMOTE_SESSION_LIMIT_EXCEEDED are already too many sessions established to that server. The workgroup or domain name is already in use by another computer on ERROR_DUP_DOMAINNAME the network. The network is not present or not started. The operation was canceled by the user. The requested operation cannot be performed on a file with a usermapped section open. The remote system refused the network connection. The network connection was gracefully closed. ERROR_NO_NETWORK ERROR_CANCELLED ERROR_USER_MAPPED_FILE ERROR_CONNECTION_REFUSED ERROR_GRACEFUL_DISCONNECT
The network transport endpoint already has an address associated with it. ERROR_ADDRESS_ALREADY_ASSOCIATED An address has not yet been associated with the network endpoint. An operation was attempted on a nonexistent network connection. An invalid operation was attempted on an active network connection. The remote network is not reachable by the transport. The remote system is not reachable by the transport. The remote system does not support the transport protocol. ERROR_ADDRESS_NOT_ASSOCIATED ERROR_CONNECTION_INVALID ERROR_CONNECTION_ACTIVE ERROR_NETWORK_UNREACHABLE ERROR_HOST_UNREACHABLE ERROR_PROTOCOL_UNREACHABLE
No service is operating at the destination network endpoint on the remote ERROR_PORT_UNREACHABLE system. The request was aborted. The network connection was aborted by the local system. The operation could not be completed. A retry should be performed. A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached. Attempting to log in during an unauthorized time of day for this account. The account is not authorized to log in from this station. The network address could not be used for the operation requested. The service is already entered in the registry. The specified service does not exist. The operation being requested was not performed because the user has ERROR_REQUEST_ABORTED ERROR_CONNECTION_ABORTED ERROR_RETRY ERROR_CONNECTION_COUNT_LIMIT ERROR_LOGIN_TIME_RESTRICTION ERROR_LOGIN_WKSTA_RESTRICTION ERROR_INCORRECT_ADDRESS ERROR_ALREADY_REGISTRYED ERROR_SERVICE_NOT_FOUND ERROR_NOT_AUTHENTICATED

ERROR_JOURNAL_HOOK_SET ERROR_HOOK_NOT_INSTALLED ERROR_INVALID_LB_MESSAGE ERROR_LB_WITHOUT_TABSTOPS ERROR_DESTROY_OBJECT_OF_OTHER_THREAD ERROR_CHILD_WINDOW_MENU ERROR_NO_SYSTEM_MENU ERROR_INVALID_MSGBOX_STYLE ERROR_INVALID_SPI_VALUE ERROR_SCREEN_ALREADY_LOCKED ERROR_HWNDS_HAVE_DIFF_PARENT ERROR_NOT_CHILD_WINDOW ERROR_INVALID_GW_COMMAND ERROR_INVALID_THREAD_ID
Cannot process a message from a window that is not a multiple-document ERROR_NON_MDICHILD_WINDOW interface (MDI) window. Pop-up menu already active. The window does not have scroll bars. Scroll bar range cannot be greater than 0x7FFF. Cannot show or remove the window in the way specified. Insufficient system resources exist to complete the requested service. Insufficient system resources exist to complete the requested service. Insufficient system resources exist to complete the requested service. Insufficient quota to complete the requested service. Insufficient quota to complete the requested service. The paging file is too small for this operation to complete. A menu item was not found. Invalid keyboard layout handle. Hook type not allowed. This operation requires an interactive window station. This operation returned because the time-out period expired. The event tracking file is corrupted. No event tracking file could be opened, so the event tracking service did not start. The event tracking file is full. The event tracking file has changed between read operations. The string binding is invalid. The binding handle is not the correct type. ERROR_POPUP_ALREADY_ACTIVE ERROR_NO_SCROLLBARS ERROR_INVALID_SCROLLBAR_RANGE ERROR_INVALID_SHOWWIN_COMMAND ERROR_NO_SYSTEM_RESOURCES ERROR_NONPAGED_SYSTEM_RESOURCES ERROR_PAGED_SYSTEM_RESOURCES ERROR_WORKING_SET_QUOTA ERROR_PAGEFILE_QUOTA ERROR_COMMITMENT_LIMIT ERROR_MENU_ITEM_NOT_FOUND ERROR_INVALID_KEYBOARD_HANDLE ERROR_HOOK_TYPE_NOT_ALLOWED ERROR_REQUIRES_INTERACTIVE_WINDOWSTATION ERROR_TIMEOUT ERROR_EVENTLOG_FILE_CORRUPT ERROR_EVENTLOG_CANT_START ERROR_LOG_FILE_FULL ERROR_EVENTLOG_FILE_CHANGED RPC_S_INVALID_STRING_BINDING RPC_S_WRONG_KIND_OF_BINDING
Microsoft Windows CE System Errors 127 RPC_S_INVALID_BINDING RPC_S_PROTSEQ_NOT_SUPPORTED RPC_S_INVALID_RPC_PROTSEQ RPC_S_INVALID_STRING_UUID RPC_S_INVALID_ENDPOINT_FORMAT RPC_S_INVALID_NET_ADDR RPC_S_NO_ENDPOINT_FOUND RPC_S_INVALID_TIMEOUT RPC_S_OBJECT_NOT_FOUND

1739 1740

The binding handle is invalid. The RPC protocol sequence is not supported. The RPC protocol sequence is invalid. The string universal unique identifier (UUID) is invalid. The endpoint format is invalid. The network address is invalid. No endpoint was found. The time-out value is invalid. The object universal unique identifier (UUID) was not found.

Last updated on Monday, September 30, 2002 Copyright Hilscher Swiss GmbH Oi:QVISRT#01.0EN
132 Microsoft Windows CE System Errors

Appendix contacts 133

Appendix contacts
Company Address Country, Post Code, Town Headquarters Hilscher GmbH Rheinstrasse 15 D-65795 Hattersheim +49 (0) 0 +49 (0) 50 info@hilscher.com www.hilscher.com Telephone Telefax E-Mail Web
Subsidiaries Hilscher China Shanghai Representative Office Huaihai Zhonghua Boss Bldg 2208 Ren Min Road No. 885 CN-200010 Shanghai +86 (0) 5161 +86 (0) 5162 info@hilscher.cn www.hilscher.com

Hilscher France S.a.r.l

12, rue du 35 ime Rgiment dAviation Miniparc du Chne F-69500 Bron
+33 (0) 9840 +33 (0) 8327
info@hilscher.fr www.hilscher.com

Hilscher Italia s.r.l

Via Grandi, 25 I-20090 Vimodrone (MI)

+39 / 068 +39 / 973

info@hilscher.it www.hilscher.com

Hilscher Japan K.K.

YKB Shinjuku-Gyoen Bldg. 3F 1-3-8 Shinjuku, Shinjuku-ku J-Tokio, 160-0022
+81 (0) +81 (0) 35362 0522
info@hilscher.jp www.hilscher.com
Hubelmattstrasse 29 CH-4500 Solothurn

+41 (0)6633 +41 (0)6632

info@hilscher.ch www.hilscher.com
Hilscher North America Suite Warrenville Road USA-Lisle, IL 60352

++505 7532

info@hilscher.us www.hilscher.com

Distributors

see www.hilscher.com