Pulsonic

washable

rt cleaning sta

f a s t cl e a n

intensi

trimmer

ct to sele

low empty
Type 5671 Modle 5671 Modelo 5671

www.braun.com/register

5671453_9595_NA_S1.indd 1

05.02.2007 13:20:36 Uhr

English Franais Espaol
Thank you for purchasing a Braun product. We hope you are completely satisfied with your new Braun shaver. If you have any questions, please call: US residents 1-800-BRAUN-11 1-800-272-8611 Canadian residents 1-800-387-6657 Merci davoir fait lachat dun produit Braun. Nous esprons que vous serez pleinement satisfait de votre nouveau rasoir Braun. Si vous avez des questions, veuillez appeler Braun Canada : 1-800-387-6657 Gracias por haber comprado un producto Braun. Esperamos que quede completamente satisfecho con su nueva afeitadora Braun. Si tiene alguna duda, por favor llame al: 01(800) 508-5800
5-671-453/00/II-07 USA / CDN / MEX Printed in Germany Imprim en Allemagne Impreso en Alemania
5671453_9595_NA_S2.indd 1

13.02.2007 12:15:13 Uhr

normal

f a st c l e a n

intens

auto se

was hab le
5671453_9595_NA_S3.indd 1

trim me r

05.02.2007 13:21:47 Uhr

English

IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using this appliance. When disconnected, the hand-held part of this shaving appliance may be cleaned under water.

DANGER

To reduce the risk of electric shock: 1. Use only in dry condition. 2. Do not submerge in water. 3. Do not reach for an appliance that has fallen into water. Unplug immediately. 4. Do not use while bathing or in a shower. 5. Do not place, store or charge the appliance where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid. 6. Except when charging, always unplug this appliance from the electrical outlet immediately after using. 7. Unplug this appliance before cleaning. 8. This appliance is provided with a special cord set with integrated Safety Extra Low Voltage power supply. Do not exchange or manipulate any part of it. 9. Do not use an extension cord with this appliance.

FOR HOUSEHOLD USE ONLY

5671453_9595_NA_S4-38.indd 4

13.02.2007 12:17:20 Uhr

WARNING
To reduce the risk of burns, fire, electric shock, or injury to persons: 1. Close supervision is necessary when this appliance is used by, on, or near children or invalids. 2. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer. 3. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or if the power supply has been dropped into water. Return the appliance to a service center for examination and repair. 4. Keep the cord away from heated surfaces. 5. Never drop or insert any object into any opening. 6. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered. 7. Do not use this appliance with a damaged or broken foil, as serious skin injuries may occur. 8. Always attach plug to appliance first, then to outlet. To disconnect, turn all controls to off, then remove plug from outlet. 9. When plugging to an electrical outlet outside the USA, use a plug adapter to match the outlets pin configuration.

SAVE THESE INSTRUCTIONS

5671453_9595_NA_S4-38.indd 5

13.02.2007 12:17:21 Uhr

Warning To prevent the cleaning uid from leaking, ensure that the Clean&Renew station is placed on a at surface. When a cleaning cartridge is installed, do not tip, move suddenly or transport the station in any way as cleaning uid might spill out of the cartridge. Do not place the station inside a mirror cabinet, nor place it on a polished or lacquered surface. The cleaning cartridge contains a highly ammable liquid so keep it away from sources of ignition. Do not expose to direct sunlight and cigarette smoking nor store it over a radiator. Keep it out of reach of children. Do not rell the cartridge and use only original Braun rell cartridges.

Description

Clean&Renew station 1 Cleaning uid display 2 Lift button for cartridge exchange 3 Station-to-shaver contacts 4 start cleaning button D fast clean button 5 Cleaning program diodes 6 Station power socket 7 Cleaning cartridge Shaver 8 Foil & cutter cassette 9 Cassette release button 0 Shaver head lock switch q Pop-out long hair trimmer w On/off switch e reset button r Shaver display t Shaver-to-station contacts z Shaver power socket u Travel case i Special cord set
5671453_9595_NA_S4-38.indd 6

Before shaving

Prior to rst use you must connect the shaver to an electrical outlet using the special cord set i or alternatively proceed as below. Installing the Clean&Renew station Using the special cord set i, connect the station power socket 6 to an electrical outlet. Press the lift button 2 to open the housing.

high low empty

norm al

auto sel

intens ive

cleaning

al norm

fast clea

Hold the cleaning cartridge 7 down on a at, stable surface (e.g. table). Carefully remove the lid from the cartridge. Slide the cartridge into the base of the station as far as it will go. Slowly close the housing by pushing it down until it locks. The cleaning uid display 1 will show how much uid is in the cartridge:

fast clean

l norma

t selec

high up to 30 cleaning cycles available low up to 7 cleaning cycles remaining empty new cartridge required
If required, the Clean&Renew station will now charge the shaver. The hygiene status of the shaver will also be analyzed and one of the following cleaning program diodes 5 will light up: clean eco normal intensive shaver is clean short economical cleaning required normal level of cleaning required high intensive cleaning required

f a st c le a n

5671453_9595_NA_S4-38.indd 7

ble washa

If the station selects one of the required cleaning programs, it will not start unless you press the start cleaning button 4. For best shaving results, we recommend cleaning after each shave.

able able

Charging and cleaning the shaver Insert the shaver head down into the cleaning station. (The contacts t on the back of the shaver will align with the contacts 3 in the cleaning station).

trimm trimm er

auto select

rt cleaning

clean eco normal intensive auto select

an f a st cle

intensive

auto sele ct

While cleaning is in progress, the respective cleaning program diode will blink. Each cleaning program consists of several cycles, where cleaning uid is ushed through the shaver head and a heat drying process dries the shaver. Depending on the program selected the total cleaning time will range from 32 to 43 minutes. The cleaning programs should not be interrupted. Please note that while the shaver is drying, the shaving head may be hot and wet. When the program is nished, the blue clean diode will light up. Your shaver is now clean and ready for use. Fast cleaning Push the fast clean button D to activate the fast clean program without drying. This program takes about 25 seconds only and is recommended when you do not have time to wait for one of the automatic cleaning programs. If you remove the shaver just after the program has nished, wipe off the shaver head with a tissue to avoid dripping. Stand-by mode 10 minutes after completing the charging or cleaning session, the Clean&Renew station switches to the stand-by mode: The diodes of the Clean&Renew station turns off.

clean eco normal

intensive auto select
5671453_9595_NA_S4-38.indd 8

t cleaning tar

f a st cle

ct auto sele

Shaver display
The shaver display r shows the charge status of the battery on the left, and the hygiene status on the right. (6 dark segments are shown on each side when the battery is fully charged and the shaver is hygienically clean). Battery segments: During charging or when using the shaver, the respective battery segments will blink. When fully charged all 6 segments are shown. With decreasing charge the segments gradually disappear. Low charge indicator: The low charge segment provided with a red frame blinks to indicate that the charge has dropped below 20%. The remaining capacity is sufcient for 2 to 3 shaves.

13.02.2007 12:17:22 Uhr

Hygiene segments: All 6 hygiene segments will appear after the shaver has been cleaned in the Clean&Renew station. When the shaver is being used, the hygiene segments will gradually disappear. Once the shaver is returned to the station, the system will automatically select the appropriate cleaning program and restore the segments to maximum hygiene. Given that rinsing the shaver under tap water is not as hygienic as the cleaning station, the hygiene segments will only restore themselves when the shaver has been cleaned in the Clean&Renew station. Charging information A full charge provides up to 50 minutes of cordless shaving time. This may vary according to your beard growth. The best environmental temperature for charging is between 41 F to 95 F / 5 C to 35 C. Do not expose the shaver to temperatures higher than 122 F / 50 C for extended periods of time.

Shaving

Press the on/off switch w to operate the shaver: The pivoting shaver head and oating foils automatically adjust to every contour of your face. To shave hard to reach areas (e.g. under the nose) slide the shaver head lock switch 0 to the back position to lock the pivoting head at an angle. To trim sideburns, moustache or beard, slide the pop-out long hair trimmer q upwards.
Tips for the perfect shave For best shaving results, Braun recommends you follow 3 simple steps: 1. Always shave before washing your face. 2. At all times, hold the shaver at right angles (90) to your skin. 3. Stretch your skin and shave against the direction of your beard growth.

release

5671453_9595_NA_S4-38.indd 9
Shaving with the cord If the shaver has run out of power (discharged), and you do not have the time to recharge it in the Clean&Renew station, you may also shave with the shaver connected to an electrical outlet via the special cord set i.

Cleaning

Automatic cleaning After each shave, return the shaver to the Clean&Renew station and proceed as described above in the section Before shaving. All charging and cleaning needs are then automatically taken care of. With daily use, a cleaning cartridge should be sufcient for about 30 cleaning cycles. The hygienic cleaning cartridge contains alcohol, which once opened will naturally evaporate slowly into the surrounding air. Each cartridge, if not used daily, should be replaced after approximately 8 weeks. The cleaning cartridge also contains lubricates, which may leave residual marks on the outer foil frame after cleaning. However, these marks can be removed easily by wiping gently with a cloth or soft tissue paper. Manual cleaning The hand-held unit shall be detached from the power supply cord before cleaning. The shaver shall not be used until it has dried. Rinsing the shaving head under running water is an alternative way to keep the shaver clean, especially when travelling: Switch the shaver on (cordless) w and rinse the shaving head under hot running water. You may use liquid soap without abrasive substances. Rinse off all foam and let the shaver run for a few more seconds.

click!

5671453_9595_NA_S4-38.indd 10

e washabl

er trimm

norma l

ive intens
Next, switch off the shaver, press the release button 9 to remove the foil and cutter cassette 8 and let it dry.
If you regularly clean the shaver under water, then once a week apply a drop of light machine oil on top of the foil and cutter cassette.

13.02.2007 12:17:23 Uhr

Alternatively, you may clean the shaver using the brush provided: Switch off the shaver. Remove the foil and cutter cassette 8 and tap it out on a at surface. Using the brush, clean the inner area of the pivoting head. However, do not clean the cassette with the brush as this may damage it. Cleaning the housing From time to time clean the housing of the shaver and the Clean&Renew station with a damp cloth, especially inside the cleaning chamber where the shaver rests. Replacing the cleaning cartridge After having pressed the lift button 2 to open the housing, wait for a few seconds before removing the used cartridge to avoid any dripping. Before discarding the used cartridge, make sure to close the openings using the lid of the new cartridge, since the used cartridge will contain contaminated cleaning solution.
Keeping your shaver in top shape
Replacing the foil and cutter cassette / reset To maintain 100% shaving performance, replace the foil and cutter cassette 8, when the replacement symbol lights up on the shaver display r (after about 18 months) or when cassette is worn. The replacement symbol will remind you during the next 7 shaves to replace the foil and cutter cassette. Then the shaver will automatically reset the display. After you have replaced the foil and cutter cassette, use a ball-pen to push the reset button e for at least 3 seconds to reset the counter. While doing so, the replacement light blinks and goes off when the reset is complete. The manual reset can be done at any time.

Series

Accessories
Available at your dealer or Braun Service Centers: Foil & Cutter cassette No. 9000 Cleaning cartridge Clean&Renew CCR

360Complete

5671453_9595_NA_S4-38.indd 11

Environmental notice

This appliance contains rechargeable batteries. To protect the environment, do not dispose of the appliance in the household waste at the end of its useful life. Disposal can take place at a Braun Service Center or appropriate collection sites. The cleaning cartridge can be disposed with regular household waste. Subject to change without notice. For electric specications, see printing on the special cord set.
5671453_9595_NA_S4-38.indd 12

13.02.2007 12:17:24 Uhr

FOR USA ONLY
2 year limited warranty (foil and cutter cassette excluded)
Braun warrants this Braun shaver (except foil and cutter cassette) to be free of defects in material and workmanship for a period of two years from the date of original purchase. If the shaver exhibits such a defect, Braun will, at its option, either repair or replace it for the consumer without charge. Please call 1-800-Braun 11 (800-272-8611) to be referred to the authorized Braun Service Center closest to you. This warranty does not cover foil and cutter cassette or damage resulting from accident, misuse, abuse, dirt, water, tampering, unreasonable use, normal wear, servicing performed or attempted by unauthorized service agencies or failure to provide reasonable and necessary maintenance, including recharging. ALL IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO 2 YEARS FROM DATE OF ORIGINAL PURCHASE. IN NO EVENT WILL BRAUN BE RESPONSIBLE FOR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other legal rights which vary from state to state.
5671453_9595_NA_S4-38.indd 13

FOR CANADA ONLY

In the event a Braun Shaver fails to function within 2 years from date of purchase, because of defects in material or workmanship, and the consumer returns the unit to an authorized service center, Braun Canada, will, at its option, either repair or replace the unit without additional charge to the consumer. This guarantee does not cover any product, which has been damaged by dropping, tampering, wrong current, servicing performed or attempted by unauthorized service agencies, misuse or abuse, kinks in the shaver foil as well as the normal wear of the shearing parts. Exclusion of Warranties: The foregoing warranty is the sole warranty offered by Braun Canada. Braun Canada hereby disclaims any implied warranty or merchantability or fitness for any particular purpose. In no event will Braun Canada be responsible for consequential damages resulting from the use of this product.

Pulsonic

washable

rt cleaning sta

f a s t cl e a n

intensi

trimmer

select

low empty

Type 5671

www.braun.com/register
5671451_9595_AMEE_S1.indd 1

25.10.2006 11:26:37 Uhr

Braun Infolines English Franais Polski esk Slovensk Magyar Hrvatski Slovenski Trke 84 104
1 BRAUN 0212 - 85 + 70 + 15 852-25249377 (Audio Supplies Company Ltd.)

F B PL TR

Braun GmbH Frankfurter Strae Kronberg/Germany
5-671-451/00/X-06/M GB/F/PL/CZ/SK/H/HR/SLO/TR/ RUS/UA/Arab Printed in Germany
5671451_9595_AMEE_S2.indd 1

25.10.2006 11:27:37 Uhr

English
Our products are designed to meet the highest standards of quality, functionality and design. We hope you enjoy your new Braun Shaver. Warning Your Pulsonic shaving system is provided with a special cord set, which has an integrated Safety Extra Low Voltage power supply. Do not exchange or tamper with any part of it, otherwise there is risk of an electric shock. To prevent the cleaning uid from leaking, ensure that the Clean&Renew station is placed on a at surface. When a cleaning cartridge is installed, do not tip, move suddenly or transport the station in any way as cleaning uid might spill out of the cartridge. Do not place the station inside a mirror cabinet, nor place it on a polished or lacquered surface. The cleaning cartridge contains a highly ammable liquid so keep it away from sources of ignition. Do not expose to direct sunlight and cigarette smoking nor store it over a radiator. Keep it out of reach of children. Do not rell the cartridge and use only original Braun rell cartridges.

Description

Clean&Renew station 1 Cleaning uid display 2 Lift button for cartridge exchange 3 Station-to-shaver contacts 4 start cleaning button D fast clean button 5 Cleaning program diodes 6 Station power socket 7 Cleaning cartridge Shaver 8 Foil & cutter cassette 9 Cassette release button 0 Shaver head lock switch q Pop-out long hair trimmer w On/off switch e reset button r Shaver display t Shaver-to-station contacts z Shaver power socket u Travel case i Special cord set 4
5671451_9595_AMEE_S4-106.indd 4

25.10.2006 11:29:33 Uhr

Before shaving
Prior to rst use you must connect the shaver to an electrical outlet using the special cord set i or alternatively proceed as below. Installing the Clean&Renew station Using the special cord set i, connect the station power socket 6 to an electrical outlet. Press the lift button 2 to open the housing.

high low empty

norm al

auto sel

intens ive

cleaning

al norm

fast clea

Hold the cleaning cartridge 7 down on a at, stable surface (e.g. table). Carefully remove the lid from the cartridge. Slide the cartridge into the base of the station as far as it will go. Slowly close the housing by pushing it down until it locks. The cleaning uid display 1 will show how much uid is in the cartridge:

fast clean

intens

l norma

t selec
high up to 30 cleaning cycles available low up to 7 cleaning cycles remaining empty new cartridge required
If required, the Clean&Renew station will now charge the shaver. The hygiene status of the shaver will also be analyzed and one of the following cleaning program diodes 5 will light up: clean eco normal intensive shaver is clean short economical cleaning required normal level of cleaning required high intensive cleaning required

f a st c le a n

5671451_9595_AMEE_S4-106.indd 5

ble washa

If the station selects one of the required cleaning programs, it will not start unless you press the start cleaning button 4. For best shaving results, we recommend cleaning after each shave.

able able

Charging and cleaning the shaver Insert the shaver head down into the cleaning station. (The contacts t on the back of the shaver will align with the contacts 3 in the cleaning station).

trimm trimm er

normal

auto select

rt cleaning
clean eco normal intensive auto select

an f a st cle

intensive

auto sele ct

25.10.2006 11:29:34 Uhr
Whilst cleaning is in progress, the respective cleaning program diode will blink. Each cleaning program consists of several cycles, where cleaning uid is ushed through the shaver head and a heat drying process dries the shaver. Depending on the program selected the total cleaning time will range from 32 to 43 minutes. The cleaning programs should not be interrupted. Please note that whilst the shaver is drying, the shaving head may be hot and wet. When the program is nished, the blue clean diode will light up. Your shaver is now clean and ready for use. Fast cleaning Push the fast clean button D to activate the fast clean program without drying. This program takes about 25 seconds only and is recommended when you do not have time to wait for one of the automatic cleaning programs. If you remove the shaver just after the program has nished, wipe off the shaver head with a tissue to avoid dripping. Stand-by mode 10 minutes after completing the charging or cleaning session, the Clean&Renew station switches to the stand-by mode: The diodes of the Clean&Renew station turns off.

clean eco normal

intensive auto select
5671451_9595_AMEE_S4-106.indd 6

t cleaning tar

f a st cle

ct auto sele

Shaver display
The shaver display r shows the charge status of the battery on the left, and the hygiene status on the right. (6 dark segments are shown on each side when the battery is fully charged and the shaver is hygienically clean.) Battery segments: During charging or when using the shaver, the respective battery segments will blink. When fully charged all 6 segments are shown. With decreasing charge the segments gradually disappear. Low charge indicator The low charge segment provided with a red frame blinks to indicate that the charge has dropped below 20%. The remaining capacity is sufcient for 2 to 3 shaves.

25.10.2006 11:29:35 Uhr

Hygiene segments: All 6 hygiene segments will appear after the shaver has been cleaned in the Clean&Renew station. When the shaver is being used, the hygiene segments will gradually disappear. Once the shaver is returned to the station, the system will automatically select the appropriate cleaning program and restore the segments to maximum hygiene. Given that rinsing the shaver under tap water is not as hygienic as the cleaning station, the hygiene segments will only restore themselves when the shaver has been cleaned in the Clean&Renew station. Charging information A full charge provides up to 50 minutes of cordless shaving time. This may vary according to your beard growth. The best environmental temperature for charging is between 5 C to 35 C. Do not expose the shaver to temperatures higher than 50 C for extended periods of time.

Shaving

Press the on/off switch w to operate the shaver: The pivoting shaver head and oating foils automatically adjust to every contour of your face. To shave hard to reach areas (e.g. under the nose) slide the shaver head lock switch 0 to the back position to lock the pivoting head at an angle. To trim sideburns, moustache or beard, slide the pop-out long hair trimmer q upwards.

Tips for the perfect shave For best shaving results, Braun recommends you follow 3 simple steps: 1. Always shave before washing your face. 2. At all times, hold the shaver at right angles (90) to your skin. 3. Stretch your skin and shave against the direction of your beard growth.

release

5671451_9595_AMEE_S4-106.indd 7

25.10.2006 11:29:36 Uhr

Shaving with the cord If the shaver has run out of power (discharged), and you do not have the time to recharge it in the Clean&Renew station, you may also shave with the shaver connected to an electrical outlet via the special cord set.

Cleaning

Automatic cleaning After each shave, return the shaver to the Clean&Renew station and proceed as described above in the section Before shaving. All charging and cleaning needs are then automatically taken care of. With daily use, a cleaning cartridge should be sufcient for about 30 cleaning cycles. The hygienic cleaning cartridge contains alcohol, which once opened will naturally evaporate slowly into the surrounding air. Each cartridge, if not used daily, should be replaced after approximately 8 weeks. The cleaning cartridge also contains lubricates, which may leave residual marks on the outer foil frame after cleaning. However, these marks can be removed easily by wiping gently with a cloth or soft tissue paper. Manual cleaning The shaver head is suitable for cleaning under running tap water. Warning: Detach the shaver from the power supply before cleaning the shaver head in water. Rinsing the shaving head under running water is an alternative way to keep the shaver clean, especially when travelling: Switch the shaver on (cordless) w and rinse the shaving head under hot running water. You may use liquid soap without abrasive substances. Rinse off all foam and let the shaver run for a few more seconds.

click!

5671451_9595_AMEE_S4-106.indd 8

e washabl

er trimm

norma l

ive intens

trim me r

Next, switch off the shaver, press the release button 9 to remove the foil and cutter cassette 8 and let it dry.
If you regularly clean the shaver under water, then once a week apply a drop of light machine oil on top of the foil and cutter cassette.

25.10.2006 11:29:37 Uhr

Alternatively, you may clean the shaver using the brush provided: Switch off the shaver. Remove the foil and cutter cassette 8 and tap it out on a at surface. Using the brush, clean the inner area of the pivoting head. However, do not clean the cassette with the brush as this may damage it. Cleaning the housing From time to time clean the housing of the shaver and the Clean&Renew station with a damp cloth, especially inside the cleaning chamber where the shaver rests. Replacing the cleaning cartridge After having pressed the lift button 2 to open the housing, wait for a few seconds before removing the used cartridge to avoid any dripping. Before discarding the used cartridge, make sure to close the openings using the lid of the new cartridge, since the used cartridge will contain contaminated cleaning solution.

Keeping your shaver in top shape
Replacing the foil and cutter cassette / reset To maintain 100% shaving performance, replace the foil and cutter cassette 8, when the replacement symbol lights up on the shaver display r (after about 18 months) or when cassette is worn. The replacement symbol will remind you during the next 7 shaves to replace the foil and cutter cassette. Then the shaver will automatically reset the display. After you have replaced the foil and cutter cassette, use a ball-pen to push the reset button e for at least 3 seconds to reset the counter. While doing so, the replacement light blinks and goes off when the reset is complete. The manual reset can be done at any time.

Series

Accessories
Available at your dealer or Braun Service Centres: Foil & cutter cassette No. 9000 Cleaning cartridge Clean&Renew CCR

360Complete

5671451_9595_AMEE_S4-106.indd 9

25.10.2006 11:29:38 Uhr

Environmental notice
This product contains rechargeable batteries. In the interest of protecting the environment, please do not dispose of the product in household waste at the end of its useful life. Disposal can take place at a Braun Service Centre or at appropriate collection points provided in your country. The cleaning cartridge can be disposed with regular household waste. Subject to change without notice. This product conforms to the European Directives EMC 89/336/EEC and Low Voltage 73/23/EEC. For electric specications, see printing on the special cord set.
Guarantee We grant 2 years guarantee on the product commencing on the date of purchase. Within the guarantee period we will eliminate, free of charge, any defects in the appliance resulting from faults in materials or workmanship, either by repairing or replacing the complete appliance as we may choose. This guarantee extends to every country where this appliance is supplied by Braun or its appointed distributor. This guarantee does not cover: damage due to improper use, normal wear and tear (e.g. foil & cutter cassette) as well as defects that have a negligible effect on the value or operation of the appliance. The guarantee becomes void if repairs are undertaken by unauthorised persons and if original Braun parts are not used. To obtain service within the guarantee period, hand in or send the complete appliance with your sales receipt to an authorised Braun Customer Service Centre. For UK only: This guarantee in no way affects your rights under statutory law.
5671451_9595_AMEE_S4-106.indd 10

25.10.2006 11:29:39 Uhr

5671451_9595_AMEE_S4-106.indd 78
, . 8. , . . . : . , : w ( ) . . . 9. ( + ) 8 . , ( + ).
, , : . ( + ) 8 . . , .
5671451_9595_AMEE_S4-106.indd 79

25.10.2006 11:30:13 Uhr

Clean&Renew , , . 2 Clean&Renew, . , , .
( + ) / 100% ( + ) 8. r ( 18 ) . 7 ( + ). .
( + ), , e 3 . . .
Braun: ( + ) 9000 Clean&Renew CCR
5671451_9595_AMEE_S4-106.indd 80

25.10.2006 11:30:14 Uhr

-. . , , Braun GmbH, Waldstr. 9, 74731 Walldurn, Germany .
BRAUN , . , , . . () BRAUN, . BRAUN . . . , (. ) 81
5671451_9595_AMEE_S4-106.indd 81
(, ) . BRAUN. , BRAUN. , , , . , . 2300-1 7.02.1992. 9.01.1996. , BRAUN , . BRAUN . , BRAUN, , . , : , - ; ; ; ( ); ; ; , ( ); , , 82
5671451_9595_AMEE_S4-106.indd 82

25.10.2006 11:30:15 Uhr

, , ( ); . ! . . , . BRAUN + 70.
5671451_9595_AMEE_S4-106.indd 83
, . , Braun. Pulsonic , . , . , (Clean&Renew) . , , , . , . , . . . Braun .
1 2 3 4 start cleaning ( ) D fast clean ( ) 5 6 7 8 9 84
5671451_9595_AMEE_S4-106.indd 84

0 q w e r t z u i

(lock) ./. (reset)
i . i, 6 . 2 . 7 , (, ). . . , , . 1 :
high 30 low 7 empty . ( t 3 ). , . , diodes
5671451_9595_AMEE_S4-106.indd 85

5:

normal intensive clean eco , , start cleaning 4. . . , , . 32 43. . , , . , clean (). . fast clean D . 25 , . , . 10 , : .
5671451_9595_AMEE_S4-106.indd 86

25.10.2006 11:30:16 Uhr

r . (6 , ). : -, . 6. . , , 20%. 2-3 . : 6 . , . , . , , , . 50 . . 5 C 35 C. 50 C .
5671451_9595_AMEE_S4-106.indd 87

25.10.2006 11:30:17 Uhr

./. w : . ( ) 0 . , , q. , Braun 3 : 1. . 2. (90) . 3. . , , .
, , . . , 30 . , . , , 8. ,
5671451_9595_AMEE_S4-106.indd 88
. , . . : . , : ( ) w . . . , , 9 8 . , . , , : . 8 . , . , , . , , . 2 , .
5671451_9595_AMEE_S4-106.indd 89

25.10.2006 11:30:18 Uhr

, , .
/ 100% , 8, r ( 18 ) . , 7 . .
, , e 3 . . .
Braun: N 9000 Clean&Renew CCR

, . , . , .

5671451_9595_AMEE_S4-106.indd 90
. . . , , , . Pulsonic 9595 : A , -74731 , 3135.2-2000 ( 30345.2-2000, 335-2-8-92), 23511-79.1, - 001-96, 239-96 Braun - ( ) : , . , Braun : -,. ,. 53. (044) 417-24-15. / (044) 417-24-26.
raun i , . , i - , . 91
5671451_9595_AMEE_S4-106.indd 91

25.10.2006 11:30:19 Uhr

. , i () aun run, i. - , run , . . i i. , i (. i ) i, , . , i , i i run. : , , (., ), , . , i - i run. , , , i . , : , - ; ; ; i i ( ); 92
5671451_9595_AMEE_S4-106.indd 92
i ; i ; , i , , ; . run .
5671451_9595_AMEE_S4-106.indd 93
5671451_9595_AMEE_S4-106.indd 94

25.10.2006 11:30:20 Uhr

5671451_9595_AMEE_S4-106.indd 95

25.10.2006 11:30:21 Uhr

5671451_9595_AMEE_S4-106.indd 96

25.10.2006 11:30:22 Uhr

5671451_9595_AMEE_S4-106.indd 97

25.10.2006 11:30:23 Uhr

5671451_9595_AMEE_S4-106.indd 98

25.10.2006 11:30:24 Uhr

5671451_9595_AMEE_S4-106.indd 99

25.10.2006 11:30:25 Uhr

5671451_9595_AMEE_S4-106.indd 100
5671451_9595_AMEE_S4-106.indd 101

25.10.2006 11:30:26 Uhr

5671451_9595_AMEE_S4-106.indd 102

25.10.2006 11:30:27 Uhr

5671451_9595_AMEE_S4-106.indd 103

25.10.2006 11:30:28 Uhr

5671451_9595_AMEE_S4-106.indd 104

25.10.2006 11:30:29 Uhr

f a st c l e a n

auto se

was hab le
5671451_9595_AMEE_S3.indd 1

25.10.2006 11:25:40 Uhr