Reviews & Opinions
Independent and trusted. Read before buy Casio EX-S12!

Casio EX-S12 Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (French)
Casio EX-S12, size: 7.2 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.


Casio EX-S12Casio EXILIM CARD EX-S12 12.1 MP Digital Camera (Green)

Casio - 12.1 megapixel - Standard SD - SDHC - 3 x optical zoom - ISO 3200 - Built-in Flash - 4 ounce

The EXILIM EX-S12 is the perfect combination of design and technology in an ultra-slim format. The camera, which is as slim as it is elegant, is equipped with amazing functions, such as the EXILIM engine 4.0, 12.1-megapixels, an extremely bright and high-contrast 6.9-cm wide-screen TFT display (super clear LCD), HD video recording and 3x optical zoom.
[ Report abuse or wrong photo | Share your Casio EX-S12 photo ]

Video review

Casio Exilim EX S12 Digital Camera


User reviews and opinions

Comments to date: 8. Page 1 of 1. Average Rating:
tekaeins 2:57am on Wednesday, October 27th, 2010 
Great all rounder for the price This is a replacement for my 2-year-old ex-s770 that died days before my vacation. Take it anywhere Nice - very well made, with an all metal case and a gloss black (painted?) finish.
Tarang 4:00pm on Wednesday, October 20th, 2010 
Great camera for the price. Got more than I expected. Very easy to use with great results. design, features, Large Display Screen, Optical Zoom. I have used a similar Casio for a couple years until I lost it. Liked it so well I bought a similar model.
pt 6:34am on Tuesday, October 19th, 2010 
This is my 3rd Exlim and I have loved them all. I have upgraded b/c of increased megapixels and have always been satisfied. I got this camera for a trip overseas and I am looking forward to a bunch of good pix. It is easy to use, and I am sort of a slow learner.
xtort 8:14pm on Saturday, September 18th, 2010 
I was doing as much research as possible between this and the Casio EX-FS10. A neighbor of mine has the EX-FS10 and let me borrow it for a few days. camera was a gift --it was here in record time and recipient loves it.
briantipton 2:40pm on Wednesday, September 8th, 2010 
Decent camera with bad movie video function. I have bought this camera mainly for its HD video function, but was totally disappointed.
xren 4:04am on Saturday, May 15th, 2010 
How to rekord the maximum video in my card 8 gigas, just 10 minutes ? Please send me how to rekord the max video on my card. My previous digicam was a Casio EX-Z750,which i loved (alas i sat on it and it broke) So I bought the S12 as a replacement.
hashky 2:08pm on Thursday, April 8th, 2010 
great camera for not a non-pro Easy To Use, Good Image Quality, Good Image Stabilization, Good in Low Light, Great Zoom, Large Clear LCD. I use the Casio EX-S12 for aerial photography Easy to Use, Good Battery Life, Good sized screen, Great Resolution, Nice Features and Settings
Baracuda 11:43pm on Tuesday, March 30th, 2010 
Easiest camera to use I have ever owned. Picture quality excelent, Easy to Use, Excellent in Low Light, Fast Shutter Speed, Good Battery Life.

Comments posted on are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.




. To track the movement of a moving subject
Half-press the shutter button to follow and focus automatically on a moving subject. See Tracking (page 38) for more information.
Holding the Camera Correctly
Your images will not come out clearly if you move the camera when you press the shutter button. When pressing the shutter button, be sure to hold the camera as shown in the illustration below, and keep it still by pressing your arms firmly against your sides as you shoot. Holding the camera still, carefully press the shutter button and take care to avoid all movement as the shutter releases and for a few moments after it releases. This is especially important when available lighting is low, which slows down the shutter speed.


Hold the camera so the flash is above the lens.
NOTE Take care that your fingers and the strap do not cover any of the areas indicated in the illustration. To protect against accidentally dropping the camera, attach the wrist strap and make sure it is around your fingers or wrist while you are operating the camera. Never swing the camera around by its strap. The supplied strap is intended for use with this camera only. Never use it for any other purpose.
Front lamp Lens Microphone

Viewing Snapshots

Use the following procedure to view snapshots on the cameras monitor screen. For information about how to play back movies, see page 88.
Press [p] (PLAY) to enter the PLAY mode.
This will display one of the snapshots currently stored in memory. Information about the displayed snapshot also is included (page [p] (PLAY) 188). You also can clear the information to view only the snapshot (page 162). You can zoom in on the image by sliding the zoom controller towards z (page 92). If you are recording a snapshot that is very important to you, it is recommended that you zoom the image and check its details after recording it.
Use [4] and [6] to scroll between images.
Holding down either button scrolls at high speed.

[6] [6]

Deleting Images
If memory becomes full, you can delete images you no longer need to free up storage and record more images.
Remember that a file (image) delete operation cannot be undone. Deleting an audio snapshot (page 112) deletes both the snapshot and the audio file.

To delete a single file

When the R Panel menu item (page 150) is Hide (so the Control Panel is not displayed), pressing [2] ( ) will cycle through the available flash settings. > Auto Flash ? Flash Off < Flash On _ Soft Flash Red Eye Reduction

[2] ( )

Flash fires automatically in accordance with exposure (amount of light and brightness) conditions. Flash does not fire. Flash always fires. This setting can be used to brighten a subject that normally comes out dark due to daylight or backlight (daylight synchro flash). Soft flash always fires, regardless of exposure conditions Flash fires automatically. This type of flash can be used to reduce the chance of redness in the subjects eyes.
Press the shutter button to shoot.
Back lamp Flashes orange while the flash is charging to indicate N that image recording is disabled. AF You will not be able to take another flash snapshot until the lamp stops flashing orange, which indicates < indicates the flash will fire. that charging is complete.
For information about Flash Range, see page 191.
NOTE Take care so your fingers and the strap do not block the flash. The desired effect may not be obtained when the subject is too far away or too close. Flash charging time (page 191) depends on operating conditions (battery condition, ambient temperature, etc.). Shooting with flash turned off when lighting is dim results in a slow shutter speed, which can cause image blur due to camera movement. Under such conditions, secure the camera with a tripod, etc. With red eye reduction, the flash is fired automatically in accordance with exposure. It does not fire in areas where lighting is bright. The presence of outdoor sunlight, fluorescent lighting, or some other light source can cause abnormal image colors. Select Flash Off for the flash setting when shooting in areas where flash photograph is prohibited.

Red-eye Reduction

Using the flash to shoot at night or in a dimly lit room can cause red spots inside the eyes of people who are in the image. This is caused when the light from the flash reflects off of the retina of the eye. When red-eye reduction is selected as the flash mode, the camera fires a pre-flash to cause the irises in the eyes of any people in the image to close, which reduces the chance of red eye. The camera also has an auto red-eye correction feature that corrects for red-eye in recorded images. Note the following important points when using red-eye reduction. Red-eye reduction does not work unless the people in the image are looking directly at the camera (flash). Red-eye reduction may not work very well if the subjects are located far away from the camera.
Other Useful Flash Features
Changing the flash intensity (page 87)
Specifying the Auto Focus Area (AF Area)
Spot This mode takes readings of a small area in the center of the image. This setting works well with focus lock (page 69). When you half-press the shutter button while this setting selected, the camera will select the optimum Auto Focus area from among nine possible areas. The focus frame of the area where the camera focuses will be displayed in green. Half-pressing the shutter button focuses on the subject and causes the focus frame to track the movement of the subject.

Undeteriorated zoom limit 3X 3X 3X 3.7X 4.7X 5.8X 18.7X
Recording Movie Images and Audio

To record a movie

Configure the quality setting for the movie (page 83).
The length of the movie you can record will depend on the quality setting you select.
In the REC mode, press [0] (Movie).
This will start recording and display Y on the monitor screen. Movie recording includes monaural audio.
Remaining recording time (page 189) [0] (Movie)
Press [0] again to stop recording.
Movie recording also will stop automatically if memory becomes full before you press [0]. The maximum size allowed for a single movie file is 4GB. Movie recording stops automatically when a file becomes 4GB.

Recording time

Shooting with BEST SHOT
With BEST SHOT (page 55), you can select the sample scene that matches the type of movie you are trying to shoot and the camera will change its setup accordingly, for beautiful movies every time. Selecting the BEST SHOT scene named Night Scene, for example, will configure the camera so night scenes appear clearer and brighter.
Minimizing the Effects of Camera Movement during Movie Recording
You can configure the camera to minimize the effects of camera movement during movie recording (page 75). Note, however, that this does not prevent image blur due to subject movement and it makes the field of view narrower.
NOTE Spending a long time using movie recording will cause the camera to become slightly warm to the touch. This is normal and does not indicate malfunction. The camera also records audio. Note the following points when shooting a movie. Take care that the microphone is not blocked by your fingers, etc. Good recording results are not possible when the camera is too far away from what you are trying to record. Operating camera buttons while shooting can cause button noise to be picked up in the audio. Microphone Shooting a very bright subject can cause a vertical band or a pink cast on the monitor screen image. This does not indicate malfunction. Use of certain types of memory cards increase the time it takes to record movies, which can cause movie frames to be lost. This condition is indicated by and Y flashing on the monitor screen. To avoid loss of movie frames, use of a memory card with a maximum transfer speed of at least 10MB per second is recommended (page 175). Only digital zoom can be used for zooming during movie recording. Since optical zoom is not possible while recording a movie, zoom as required before pressing [0] to start recording. The effects of camera movement in an image become more pronounced when you shoot close up or with a large zoom factor. Because of this, use of a tripod is recommended under these conditions. Auto Focus and Macro Focus become fixed focus while shooting a movie (page 66).

Press the shutter button again to stop audio recording.
To create another audio recording file, repeat steps 3 and 4. To turn off Voice Recording, press [BS] (^) and then select R (Auto).

Remaining recording time

NOTE You can use [8] (DISP) during audio recording to toggle the monitor screen on and off. When monitor screen contents are turned off, selecting the Voice Recording scene will cause the monitor screen to turn off immediately (page 162).

About audio data

Audio files can be played back on a computer with Windows Media Player or QuickTime. Audio Data: WAVE/IMA-ADPCM (WAV extension)
To play back an audio recording
In the PLAY mode, use [4] and [6] to display the Voice Recording file you want to play.
` is displayed in place of an image for a Voice Recording file.
Press [SET] to start playback.
Voice Recording Playback Controls
Fast forward/fast reverse Play/pause Jump to marker Volume adjustment Monitor screen on/off Playback end [4] [6] [SET] While playback is paused, press [4] or [6] to jump to the next marker and then press [SET] to resume playback. Press [2] and then press [8] [2] [8] (DISP) [MENU]


What is BEST SHOT?
BEST SHOT provides you with a collection of sample scenes that show a variety of different types of shooting conditions. When you need to change the setup of the camera, simply find the scene that matches what you are trying to achieve, and the camera sets up for it automatically. This helps to minimize the chance of ruined images due to poor exposure and shutter speed settings.

Some Sample Scenes



Night Scene

Night Scene Portrait

To shoot an image with BEST SHOT
In the REC mode, press [BS] (^).
This will display a menu of BEST SHOT scenes. The initial default selection is R (Auto).
Currently selected scene (with boundary)
Use [8], [2], [4], and [6] to move the boundary to the scene you want to select.

Scene name

The scene menu has multiple Scene number pages. Use [8] and [2] to scroll between menu pages. You can access information about the currently selected scene. See page 56 for details. To return to normal snapshot recording, select Scene 1 R (Auto). Pressing [MENU] while the scene selection screen or scene information screen is displayed will cause the boundary to jump directly to R (Auto).

Press [SET] to configure the camera with the settings for the currently selected scene.
This returns to the REC mode. The settings of the scene you selected remain in effect until you select a different scene. To select a different BEST SHOT scene, repeat the above procedure from step 1.
Press the shutter button (if you are shooting a snapshot) or [0] (if you are shooting a movie).
NOTE The BEST SHOT YouTube scene sets up the camera for recording movies that are optimized for uploading to YouTube. Movies recorded with the YouTube scene are stored in a special folder to make them easy to locate for uploading (page 141). Maximum recording time while the YouTube scene is selected is 10 minutes.
. Using Scene Information Screen
To find out more about a scene, select it with the boundary on the scene selection screen, and then slide the zoom controller in either direction. To return to the scene menu, slide the zoom controller again. To scroll between scenes, use [4] and [6]. To configure the camera with the settings for the currently selected scene, press [SET]. To return to the scene information screen for the currently selected BEST SHOT scene, press [BS] (^).

. BEST SHOT Precautions

The following BEST SHOT scenes cannot be used while recording a movie: Dynamic Photo, Multi-motion Image, ID Photo, Business cards and documents, White board, etc., Self-portrait (1 person), Self-portrait (2 people) The following BEST SHOT scenes cannot be used while shooting a snapshot: Prerecord (Movie), For YouTube. The Voice Recording scene cannot be used while shooting a snapshot or recording a movie. Some scenes like Night Scene and Fireworks results in a slow shutter speed setting. Since a slow shutter speed increases the chance of digital noise in the image, the camera automatically performs a digital noise reduction process when either of these scenes is selected. This means that it will take a bit longer for the image to be saved which is indicated by the back lamp flashing green. Do not perform any key operation during that time. Also, it is a good idea to use a tripod to avoid image blur due to camera movement when shooting at slow shutter speeds. Your camera includes a sample scene that optimizes settings for auction site images. Depending on your camera model, the sample scene is named either For eBay or Auction. Images you record using the auction site sample scene are stored in a special folder so you can easily find them on your computer (page 141). High Sensitivity The high sensitivity setting is disabled whenever the cameras flash fires. High sensitivity may not produce the desired results in very dark conditions. When shooting with slow shutter speeds, use a tripod to protect against blurring due to camera movement. Under certain lighting conditions, the camera will perform an automatic noise filtering operation to reduce digital noise in the image. This operation causes the camera to take longer than normal to save the image and be ready for the next shot. BEST SHOT scene images were not shot using this camera. Images shot using a BEST SHOT scene may not produce the results you expected due to shooting conditions and other factors. You can modify the camera settings that are made after you select a BEST SHOT scene. Note, however, that the BEST SHOT settings revert to their defaults when you select another BEST SHOT scene or turn off the camera.

Tips for Better Auto Shutter Snapshots
Using Auto Shutter in combination with Anti Shake (page 75) reduces the chance of image blur even more. While recording with Detect Blur or Detect Smile, keep the camera as still as possible until the recording operation is complete.
If the camera remains in Auto Shutter standby without releasing the shutter, you can record an image by pressing the shutter button all the way down again. Detect Blur and Detect Panning may not produce the desired effect when shooting in an area where dim lighting requires a slow shutter speed, or when the subject is moving extremely quickly. Since facial expressions differ from individual to individual, you may experience problems with getting the camera to release the shutter while Detect Smile is being used. If this happens, change the trigger sensitivity setting. The Auto Power Off (page 159) trigger time is fixed at five minutes while the camera is in Auto Shutter standby. Sleep (page 158) is disabled while Auto Shutter being used. To cancel Auto Shutter recording while Auto Shutter is being performed (indicated by 0 Auto flashing on the monitor screen), press [SET]. The Tracking setting for the AF area cannot be used while Detect Blur or Detect Panning is selected for the Auto Shutter setting (page 38). Always make sure you had Spot selected for the AF area whenever you are using the Detect Smile Auto Shutter setting (page 38). Auto Shutter cannot be used in combination with any of the following features. Some BEST SHOT sample scenes (AUTO BEST SHOT, Dynamic Photo, ID Photo, Business cards and documents, White board, etc., Prerecord (Movie), For YouTube, Voice Recording) The following functions are disabled when shooting with Auto Shutter. Triple Self-timer
Shooting with Face Detection (Face Detection)
[r] (REC) * [MENU] * REC Tab * Face Detection
For details, see the Control Panel procedure on page 43.
Reducing the Effects of Camera and Subject Movement (Anti Shake)
[r] (REC) * [MENU] * REC Tab * Anti Shake
You can turn on the cameras Anti Shake feature to reduce image blur due to subject movement or camera movement when shooting a moving subject using telephoto, when shooting a fast-moving subject, or when shooting under dim lighting conditions. Auto Off Minimizes the effects of hand and subject movement. Turns off Anti Shake settings
NOTE ISO sensitivity, aperture, and shutter speed do not appear on the monitor screen when you half-press the shutter button while Auto is selected. These values will appear briefly, however, in the preview image that is displayed immediately after you shoot a snapshot. The ISO sensitivity setting (page 85) must be Auto for Anti Shake to work. Shooting with Anti Shake can cause an image to appear somewhat coarser than normal and can cause slight deterioration of image resolution. Anti Shake may not be able to eliminate the effects of camera or subject movement when movement is severe.

You can use this setting to optimize the balance between bright areas and dark areas in existing images. +2 +1 Cancel Performs a higher level of brightness correction than the +1 setting. Performs brightness correction. Does not perform brightness correction.
NOTE Correcting the lighting when shooting produces better results (page 39). Altering the lighting of an image causes the original image and the new (altered) version to be stored as separate files. When you display an altered image on the cameras monitor screen, the date and time indicates when the image was originally recorded, not when the image was altered.
Using Red Eye Correction (Red Eye)
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Red Eye
Using the flash to shoot at night or in a dimly lit room can cause red spots inside the eyes of people who are in the image. This is caused when the light from the flash reflects off of the retina of the eye. Red eye correction corrects the eye colors of subjects to their normal colors when red eye occurs while using the flash. Correct Cancel Turns on red eye correction. Turns off red eye correction.
NOTE The original snapshot is retained in memory and not deleted. Red eye correction may not be possible in the case of small faces or profiles. Red eye correction may not produce the desired effect under certain conditions.
Adjusting White Balance (White Balance)
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * White Balance
You can use the white balance setting to select a light source type for a recorded image, which will affect the colors of the image.
Daylight ' Overcast Shade Day White
Outdoors, fair weather Outdoors, cloudy to rain, in tree shade, etc. Very high temperature light, such as building shade, etc. White or daywhite fluorescent lighting, without suppressing color cast Daylight fluorescent lighting, while suppressing color cast Suppressing of the appearance of light bulb lighting No white balance adjustment




NOTE You also can adjust the white balance when recording images (page 84). The original snapshot is retained in memory and not deleted. When you display an altered image on the cameras monitor screen, the date and time indicates when the image was originally recorded, not when the image was altered.
Adjusting the Brightness of an Existing Snapshot (Brightness)
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Brightness
You can select one of five brightness levels, from +2 (brightest) to 2 (least bright).
NOTE The original snapshot is retained in memory and not deleted. When you display an altered image on the cameras monitor screen, the date and time indicates when the image was originally recorded, not when the image was altered.

Keystone Correction (Keystone)
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Keystone
You can use keystone correction to correct rectangular and square shapes in a snapshot that do not appear normal because they were not shot straight on. The corrected image is saved as 2M (1600x1200 pixels) size.
Use [4] and [6] to select the shape in the snapshot that you want to correct. Use [8] and [2] to select Correct and then press [SET].
NOTE If the original image is smaller than 2M size, the new (corrected) version will be the same size as the original. The original snapshot is retained in memory and not deleted. When you display an altered image on the cameras monitor screen, the date and time indicates when the image was originally recorded, not when the image was altered.
Using Color Correction to Correct the Color of an Old Photograph (Color Correction)
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Color Correction
Color Correction lets you correct the color of an old photograph. The corrected image is saved as 2M (1600x1200 pixels) size.
Perform the above operation.
An image of the photograph you are restoring will appear on the monitor screen with a red boundary around it. If there is a black boundary, it means that the camera detected more than one rectangular area in the image. Use [4] and [6] to move the boundary and select the area of the photograph.
Use [8] and [2] to select Trim, and then press [SET].
This will display a selection boundary for trimming the on-screen image.
Slide the zoom controller to resize the selection boundary and specify the image size you want. Use [8], [2], [4], and [6] to move the selection boundary to it encloses the area of the image you want to trim to and then press [SET].
NOTE If the original image is smaller than 2M size, the new (corrected) version will be the same size as the original. The original snapshot is retained in memory and not deleted. If you do not want a border around the resulting image, select an area that is smaller than the original image. When you display a color corrected image on the cameras monitor screen, the date and time indicates when the image was originally recorded, not when the image was color corrected.
Selecting Images for Printing (DPOF Printing)
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * DPOF Printing

. Standards Supported by the Camera
PictBridge This is a standard of the Camera and Imaging Products Association (CIPA). You can connect the camera directly to a printer that supports PictBridge, and perform image selection and printing using the camera monitor screen and controls. DPOF support PRINT Image Matching III Using image editing software and printing on a printer that supports PRINT Image Matching III makes it possible to use information about shooting conditions that is recorded with the image, and produce exactly the type of image you want. PRINT Image Matching and PRINT Image Matching III are trademarks of Seiko Epson Corporation. Exif Print Printing on a printer that supports Exif Print (Exif 2.2) uses information about shooting conditions recorded with the image to enhance printed image quality. Contact your printer manufacturer for information about models that support Exif Print, printer upgrades, etc.
Using the Camera with a Computer
Things you can do using a computer.
You can perform the operations described below while the camera is connected to a computer. Save images to a computer and view them there Save images and view them manually (USB connection) (pages 125, 134). Transfer images to a computer automatically over a wireless LAN for viewing (Eye-Fi) (page 139). In addition to images, you also can transfer screen shot images from your computer to the camera (Photo Transport*) (page 131). You can play back movies (pages 129, 137). To edit movies, use commercially available software as required. You can transfer screen shots of documents, digital books, web pages, and more to camera memory and take them along anywhere (CASIO DATA TRANSPORT) (page 143).
Transfer images stored on your computer to camera memory Playback and edit movies
Transfer document data to the camera

* Windows only

The procedures you need to perform when using the camera with your computer and when using the bundled software are different for Windows and the Macintosh. Windows users should refer to Using the Camera with a Windows Computer on page 124. Macintosh users should refer to Using the Camera with a Macintosh on page 134.
Using the Camera with a Windows Computer
Install the required software in accordance with the version of Windows you are running and what you want to do. When you want to do this: Operating System Version Install this software: Installation not required. Installation not required. Windows Media Player, which is already installed on most computers, can be used for playback. If your computer is running Windows 2000 and does not have DirectX 9.0c or higher installed, download DirectX from the Microsoft DirectX site and install it on your computer. Use commercial software as required. See page: 125

Turn on the camera. Windows Vista users: Click Start and then Computer. Windows XP users: Click Start and then My Computer. Windows 2000 users: Doubleclick My Computer.

7. 8. 9. 10.

Double-click Removable Disk.
Your computer recognizes the memory card loaded in the camera (or built-in memory if there is no card) as a removable disk.
Right-click the DCIM folder. On the shortcut menu that appears, click Copy. Windows Vista users: Click Start and then Documents. Windows XP users: Click Start and then My Documents. Windows 2000 users: Doubleclick My Documents to open it.
If you already have a DCIM folder in My Documents, the next step will overwrite it. If you want to keep the existing DCIM folder, you need to change its name or move it to a different location before performing the next step.
On the My Documents Edit menu, select Paste.
This will paste the DCIM folder (and all the image files it contains) into your My Documents folder. You now have a copy of the files that are in camera memory on your computer.
After you finish copying images, disconnect the camera from the computer.
Windows Vista, Windows XP On the camera, press [ON/OFF] to turn off the camera. After making sure that the back lamp is unlit, disconnect the camera from the computer. Windows 2000 Click card services in the task tray on your computer screen, and disable the drive number assigned to the camera. Next, after making sure that the back lamp is unlit, press the cameras [ON/OFF] button to turn off the camera and disconnect the camera from your computer.
. To view images you copied to your computer
Double-click the copied DCIM folder to open it. Double-click the folder that contains the images you want to view. Double-click the image file you want to view.
For information about file names, see Memory Folder Structure on page 141. An image that was rotated on the camera will be displayed on your computer screen in its original (unrotated) orientation.
Never use your computer to modify, delete, move, or rename any image files that are in the cameras built-in memory or on its memory card. Doing so can cause problems with the cameras image management data, which will make it impossible to play back images on the camera and can drastically alter remaining memory capacity. Whenever you want to modify, delete, move, or rename an image, do so only on images that are stored on your computer.

You can protect a specific document or all documents against deletion.
Display any page in the document that contains the page you want to protect and then press [MENU]. On the DATA tab, select Protect, and then press [6].
You also can use the same procedure as above in the PLAY mode to protect a document (page 108).

Deleting Document Data

. To delete a document page
Display any page in the document that contains the page you want to delete and then press [2] ( ). Use [4] and [6] to select the page you want to delete. Use [8] and [2] to select 1 page and then press [SET].
To delete all of the pages in the document, select All pages.
To delete other pages in the document, repeat steps 2 and 3.
To exit the delete operation, press [MENU].

. Deleting a Document

You can delete a single document or you can batch delete all of the documents. Formatting camera memory (page 161) also will delete all contents on the memory card or in built-in memory.
To delete a single document
On the document menu, use [8], [2], [4], and [6] to move the selection boundary to the document you want to delete. Press [MENU]. Use [8] and [2] to select 1 doc and then press [SET]. In response to the confirmation message that appears, use [8] and [2] to select Yes, and then press [SET].

To delete all documents

While the document menu is displayed, press [MENU]. Use [8] and [2] to select All docs and then press [SET]. In response to the confirmation message that appears, use [8] and [2] to select Yes, and then press [SET].

Other Settings (Set Up)

This section explains menu items that you can use to configure settings and perform other operations in both the REC mode and PLAY mode. For information about menu operations, see page 64.
REC Mode Control Panel Display (R Panel)
[MENU] * Set Up Tab * R Panel
Use the settings below to show or hide the Control Panel, and to select the icons to appear on the Control Panel. Displays the Control Panel. All camera setting icons are cleared from the displayed image while the Control Panel is displayed.

. Smoke, abnormal odor, overheating, and other abnormalities
Continued use of the camera while it is emitting smoke or strange odor, or while it is overheating creates the risk of fire and electric shock. Immediately perform the following steps whenever any of the above symptoms are present. 1. Turn off the camera. 2. Remove the battery from the camera, taking care to protect yourself against burn injury. 3. Contact your dealer or nearest CASIO authorized service center.
. Water and Foreign Matter
Water, other liquids, or foreign matter (especially metal) getting inside the camera creates the risk of fire and electric shock. Immediately perform the following steps whenever any of the above symptoms are present. Particular care is required when using the camera where it is raining or snowing, near the ocean or other body of water, or in a bathroom. 1. Turn off the camera. 2. Remove the battery from the camera. 3. Contact your dealer or nearest CASIO authorized service center.
. Dropping and Rough Treatment
Continued use of the camera after it is damaged by dropping or other rough treatment creates the risk of fire and electric shock. Immediately perform the following steps whenever any of the above symptoms are present. 1. Turn off the camera. 2. Remove the battery from the camera. 3. Contact your dealer or nearest CASIO authorized service center.

. Keep Away From Fire

Never expose the camera to fire, which can cause it to explode and creates the risk of fire and electric shock.
. Disassembly and Modification
Never try to take the camera apart or modify it in any way. Doing so creates the risk of electric shock, burn injury, and other personal injury. Be sure to leave all internal inspection, maintenance, and repair up to your dealer or nearest CASIO authorized service center.
. Locations To Be Avoided
Never leave the camera in any of the following types of locations. Doing so creates the risk of fire and electric shock. Areas subject to large amounts of humidity or dust Food preparation areas or other locations where oil smoke is present Near heaters, on a heated carpet, in areas exposed to direct sunlight, in a closed vehicle parked in the sun, or other areas subject to very high temperatures Never place the camera on an unstable surface, on a high shelf, etc. Doing so can cause the camera to fall, creating the risk of personal injury.
. Backing Up Important Data
Always keep backup copies of important data in camera memory by transferring it to a computer or other storage device. Note that data can be deleted in the case of camera malfunction, repair, etc.

. Memory Protection

This manual provides an introduction to Dynamic Photo, which creates a whole new way to enjoy digital imaging. All screen shots shown in this manual are in English. However, the camera allows you to select another display language, if you want.
Dynamic Photo! A totally new way to enjoy digital photography!.2
Dynamic Photo Technology... 3
Creating a Dynamic Photo Image...4
Step 1: Shoot the subject.... 4 Step 2: Create the Dynamic Photo image.. 6
. Four Tips for Good Subject Cropping...7. Specifying the Subject Type and CS Speed...10
Step 3: Have fun with Dynamic Photo... 11 Step 4: Use Dynamic Studio to expand use of Dynamic Photo images to other applications... 11
Create Original Movies with Dynamic Studio..12
Using Dynamic Studio... 12
. Movie Conversion Settings....18. Download Movie Page....21
Dynamic Photo! A totally new way to enjoy digital photography!
Dynamic Photo makes it easy to crop a moving subject out of a series of images and insert it into other images! A simple operation on the camera extracts a moving subject automatically by cropping up to 20 Continuous Shutter images. Become the star of your digital images! Create the images of your dreams! All on the camera, without using a computer! With Dynamic Photo you can shoot, create, and view images, just about anywhere! Amazing monster dog! Animated seasons greetings!
Become a part of your drawings!
Skiing down a big mountain!

Dynamic Photo Technology

Dynamic Photo lets you extract a moving subject from a series of Continuous Shutter (CS) images and insert it into another image. This makes it possible to combine images in ways that create exciting, totally unbelievable scenes.

Moving CS Images

Extract the subject.
Insert it into another image.
You can create a Dynamic Photo image by inserting a moving subject into a background image. Before performing the following steps, you should record the background image into which you want to insert the moving subject.

Background Image

Creating a Dynamic Photo Image
Step 1: Shoot the subject.


This document is created with trial version of HTML2PDF Pilot 2.16.100.

About US




Contact US

Shop By Categories 6
Canon charger Casio charger JVC charger Nikon charger Olympus charger Samsung charger Sony charger Sanyo charger
Chargers > Casio Battery Charger > Casio NP-60 Charger

C ateg o ri es

Canon Battery chargers Casio Battery chargers JVC Battery chargers Panasonic Battery charger Sharp Battery chargers Olympus Battery chargers
C asi N P -60 C h arg er,R ep l o acem en t fo r C asi N P -60 B attery o C h arg er
Casio NP-60 Charger can work with Casio NP-60 battey part number, and Casio Exilim EXS10, Exilim Zoom EX-Z19 camera models, and so on. Our Casio NP-60 Charger is the same quality as the OEM Casio battery Charger, and it is more cheaper.

P ro m o ti n s o

Casio NP-20 Charger Charger for Casio NP-20 Battery JVC BN-VF808 Charger Charger for JVC BN-VF808 Battery Canon NB-2L Charger Charger for Canon NB-2L Battery Olympus LI-40B Charger Charger for Olympus LI-40B Battery
Vol e: tag 110V A C (I p u t),12V-1A n 12V (O u tp u t) Multi-charger for Casio NP-60
battery, You Could use both in car and at home, Enjoy to your digital life. $25. 09 List Price:$25.

Nikon Battery chargers

Y o u r P ri : $17. ce 56
Fujifilm Battery chargers Kodak Battery chargers Samsung Battery chargers Sanyo Battery chargers Sony Battery chargers Canon Camcorder charger Casio Camera charger JVC Camcorder charger Panasonic Camcorder charger Sharp Camcorder charger Olympus Camera charger Nikon Camera charger Fujifilm Camera charger Kodak Camcorder charger Charger for Casio NP-60 Battery Samsung Camcorder charger Sanyo Camera charger Sony Camcorder charger Canon Camera charger JVC Camera charger Panasonic Camera charger Kodak Camera charger Samsung Camera charger Sony Camera charger

Casio NP-60 Casio BC-60L

Click to enlarge Guarantee: 100% Brand New, Full 1 Year Warranty, Fast Delivery! Charger for Casio NP-60 Battery
Nikon EN-EL5 Charger Charger for Nikon EN-EL5 Battery
100 -240 A C (I p u t), 2V / 4V D C 100n 4. 8. (O u tp u t) Multi-charger for Casio NP-60
battery, You Could Only use at home, Enjoy to your digital life. $21. 93 List Price:$21.
Samsung SLB-10A Charger Charger for Samsung SLB10A Battery Sharp BT-L11 Charger Charger for Sharp BT-L11 Battery Canon BP-511 Charger Charger for Canon BP-511 Battery
Y o u r P ri : $15. ce 35
Click to enlarge Guarantee: 100% Brand New, Full 1 Year Warranty, Fast Delivery!
Canon NB-5L Charger Charger for Canon NB-5L Battery Sanyo DB-L20 Charger
C a sio N P -60 C h a rg e r C h a ra cte r:
Item Number: Input: Output: Dimension: Weight: Type: W B C C S 004S U 110V A C 12V -1A 106. 50x69. 00x37. 00m m 368. 55g C asi B attery chargers o
Charger for Sanyo DB-L20 Battery Sony NP-BG1 Charger Charger For Sony NP-BG1 Battery

G o o g l S earch e

F" F it to ch a rg e r C a sio B a tte ry N u m b e rs:(P re ss "C trl+ F " to fin d yo u r se a rch ) "C
Search F it to ch a rg e r C a n o n ca m e ra m o d e ls:(P re ss "C trl+ F " to fin d yo u r se a rch ) "C F"

Di sco u n ts

Casio Exilim EX-FS10 Casio Exilim EX-S10BE Casio Exilim EX-S10SR Casio Exilim EX-Z80 Casio Exilim EX-Z80GN Casio Exilim EX-Z80VP Casio Exilim EX-Z9EO Exilim Zoom EX-Z19 Exilim Zoom EX-Z19LP Exilim Zoom EX-Z20 Exilim Zoom EX-Z85BE Exilim Zoom EX-Z85EO Exilim Zoom EX-Z85SR Exilim Zoom EX-Z90BE Exilim Zoom EX-Z90PK
Casio Exilim EX-S12 Casio Exilim EX-S10BK Casio Exilim EX-Z25 Casio Exilim EX-Z80BE Casio Exilim EX-Z80PK Casio Exilim EX-Z9 Casio Exilim EX-Z9PK Exilim Zoom EX-Z19BK Exilim Zoom EX-Z19PK Exilim Zoom EX-Z21 Exilim Zoom EX-Z85BK Exilim Zoom EX-Z85GN Exilim Zoom EX-Z85VP Exilim Zoom EX-Z90BK Exilim Zoom EX-Z90SR
Casio Exilim EX-S10 Casio Exilim EX-S10RD Casio Exilim EX-Z29 Casio Exilim EX-Z80BK Casio Exilim EX-Z80SR Casio Exilim EX-Z9BK Casio Exilim EX-Z9SR Exilim Zoom EX-Z19GN Exilim Zoom EX-Z19SR Exilim Zoom EX-Z85 Exilim Zoom EX-Z85BN Exilim Zoom EX-Z85PK Exilim Zoom EX-Z90 Exilim Zoom EX-Z90GD

i 30% off O nlne C harger S tore
This document is created with htrial u u se C a sioofPHTML2PDFlePilot o2.16.100.w in g d e ta ils: W e n yo version N -60 ch a rg e r, p a se n tice th e fo llo
1. Please ensure Casio NP-60 charger that you are going to buy fits the brand, model and part number of your device; 2. Package includes High Performance Turbo Charger, AC Power Adapter and 12.00V Car Cord; 3. Turbo Charger must be used with our AC Adapter or our Car Cord; 4. Designed to charge batteries quickly and safely; 5. Convenient LEDs indicate the charging status; 6. Casio NP-60 Battery charger is 100% Compatible with OEM Casio BC-60L charger part numbers; 7. If your NP-60 Casio charger has any problem, please contact our customer service.

D iscla im e r:

All our chargers and other products which supplied by our product manufacturers are replacement, we indicated this point on each page of our website's titles. Our Company and this Website are neither affiliated with, authorized by, licensed by, distributors for, nor related in any way to these manufacturers, nor are the products offered for sale through our web site manufactured by or sold with the authorization of the manufacturers with which our products. We mainly supply replacement for Famous brand batteries, if we violate your trademark rights, please tell us, we will delete them as soon as possible.

Share |

Copyright 2012 w w All Rights Reserved. Global Batteries Store


Technical specifications

Product TypeDigital camera - compact
Width3.7 in
Depth0.6 in
Height2.2 in
Weight4 oz
Enclosure ColorGreen
Main Features
Resolution12.1 Megapixel
Color SupportColor
Optical Sensor TypeCCD
Total Pixels12,390,000 pixels
Effective Sensor Resolution12,100,000 pixels
Optical Sensor Size1/2.3"
Light SensitivityISO 100, ISO 800, ISO 400, ISO 200, ISO 64, ISO 1600, ISO 3200, ISO auto
Digital Zoom4 x
Shooting ModesFrame movie mode
Max Shutter Speed1/2000 sec
Min Shutter Speed4 sec
Exposure MeteringMulti-segment, center-weighted, spot
Exposure ModesProgram, automatic
Exposure Compensation±2 EV range, in 1/3 EV steps
Face DetectionYes
White BalanceCustom, automatic, presets
White Balance PresetsTungsten light, daylight, shade, overcast, fluorescent light (cool white), fluorescent light (daylight)
Digital Video FormatAVI, MJPEG
Still Image FormatJPEG
Continuous Shooting Speed4 frames per second, 10 frames per second
Video CaptureAVI - 640 x 480 - 30 fps AVI - 320 x 240 - 15 fps 1280 x 720
Memory / Storage
Flash Memory35.2 MB flash - integrated (soldered memory - 35.2 MB )
Supported Flash MemorySD Memory Card, SDHC Memory Card
Image StorageJPEG 4000 x 3000 JPEG 4000 x 2656 JPEG 4000 x 2240 JPEG 3264 x 2448 JPEG 2560 x 1920 JPEG 2048 x 1536 JPEG 640 x 480
Camera Flash
Camera FlashBuilt-in flash
Flash ModesFill-in mode, auto mode, flash OFF mode, red-eye reduction, soft
Red Eye ReductionYes
FeaturesAF illuminator
Lens System
TypeZoom lens - 6.3 mm - 18.9 mm - f/2.8-5.3
Focal Length6.3 mm - 18.9 mm
Focal Length Equivalent to 35mm Camera36 - 108mm
Focus AdjustmentAutomatic, manual
Auto FocusTTL contrast detection
Min Focus Range15.7 in
Macro Focus Range4 in - 19.7 in
Lens ApertureF/2.8-5.3
Optical Zoom3 x
Zoom AdjustmentMotorized drive
Lens Construction5 group(s) / 6 element(s)
FeaturesBuilt-in lens shield, aspherical lens
Additional Features
Self TimerYes
Self Timer Delay10 sec, 2 sec
Additional FeaturesAudio recording, USB 2.0 compatibility, built-in speaker, date/time stamp, DPOF support, digital image rotation, PictBridge support, in-camera red-eye removal, MOTION PRINT, face detection, YouTube capture mode
TypeLCD display - TFT active matrix - 2.7" - color
Display Form FactorBuilt-in
Display Format230,160 pixels
TypeMicrophone - built-in
Microphone TechnologyElectret condenser
Microphone Operation ModeMono
Connector Type1 x USB 1 x composite video/audio output
Expansion Slot(s)1 x SD Memory Card
SoftwareDrivers & Utilities
System Requirements for PC Connection
Peripheral DevicesUSB port, CD-ROM drive
Included AccessoriesHand strap
Cables IncludedUSB cable A/V cable
Power DeviceBattery charger - external
Supported BatteryCasio NP-60
Supported Battery Details1 x Li-ion rechargeable battery ( included )
Universal Product Identifiers
BrandCasio Computer
Part NumberEX-S12GNEBC



W1943SB CDX-R6550 P7389 Cuisine YZ426F-2001 NN-K151W LE40C630 PRO X2 PK 101 RD-JT91 Alan 38 DZ9911P SC460 Nokia 2320 MX36leun Watch B080 170S7 CZ-21M063Z UX-G3 FA522 A-550R CDM-100 ST-9030 RMV8A CFD-E75L R-1610 BH200 OZ-290 SC-VK91D 300 Mini A7V400-MX Price Samsung L878 DE Luxe Uniden BCT8 TX109 Lancia Musa CP2500 40308 Singer 7568 Battery P800W SE7451B WM3431HW LI 3740 MT-03 Charger Laserjet 3390 DV-SP1000 1000-2 S Inhalt Server XDM6220 P 6-24 FB162I 1202VLZ 7100V MXD-D1 Hygro SHP 2076 PT-2300 CFD-G70 N670U Advance 10B F5D6050 2300D PC1550 LC-MP5-FHD LST243H-2 Mt 262 FL824C Grandprix 2002 UX-G50 29PT9009 Color 900 Csce9JKE CD-57 Syncmaster 152V RT-950BX LP120HED-y8 Bladesystem Sirocco SGH-B100M Virus C AF220T Competence 824B SCX-3205W 32LG5700 AEU L8gbmp410 640-2 SHD514XF1 Edition Digimax A403 Travelmate-3280 Kxtg6511E XV-5050 CDR-HD1500 SA5285 Suunto Zoop HF3463 01 Aspire-L100 SKW-320X DAV-TZ630


manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101