AUDIO EQUIPMENT AND TELEMATICS STEERING MOUNTED CONTROLS

CRUISE CONTROL

READY TO SET OFF

CITRON C-CROSSER

REMOTE CONTROL KEY PARKING BRAKE

1. 2. 3. 4.

On/Off and selection of radio or CD mode Volume decrease Volume increase Search for a higher radio frequency/Next track/Fast forwards play 5. Search for a lower radio frequency/Previous track/Fast backwards play
1. "ON/OFF" button: activation/deactivation of the cruise control mode. 2. "COAST SET" button: storing of a driving speed and decreasing of the cruising speed. 3. "ACC RES" button: increasing of the cruising speed and recalling of the stored speed. 4. "CANCEL" button: switching off of the cruise control.
A. Unfolding/folding the key.

FUEL TANK

AUDIO CD SYSTEM
OPENING THE BONNET MANUAL STEERING WHEEL HEIGHT ADJUSTMENT
1. Unlocking the lever. 2. Locking the lever. 3. Adjustment of the height of the steering wheel.

DIESEL

the engine must be switched off, pull the control A located at the bottom left of the driver's seat to release the fuel filler flap, open the fuel filler flap B, turn the filler cap C to the left.
From inside: pull the release lever A, on the left-hand side below the door, towards you.

1. Opening. 2. Closing.

AUDIO-TELEMATIC SYSTEM
6-SPEED MANUAL GEARBOX ELECTRIC WINDOW CONTROLS
From outside: move the safety catch to the left then raise the bonnet. Secure the stay in its housing to hold the bonnet open.
FL - C - CROSSER - ED 01-2010 - AN

1. 2. 3. 4. 5.

Driver's electric window control. Passenger's electric window control. Rear right electric window control. Rear left electric window control. Deactivation of the front passenger and rear electric window controls. Reverse To change to reverse gear, lift the ring under the gear lever knob and push the gear lever to the left then to the front.

DOOR MIRROR ADJUSTMENT

A. Selection of the mirror. B. Adjustment of the position of the mirror. C. Folding/Unfolding.
Fiche_loueur_C-Crosser_an_01-2011 1

02/07/2010 21:11:25

CVT GEARBOX

DCS GEARBOX

AUTOMATIC AIR CONDITIONING
Automatic programme (comfort).
Deactivation of the air conditioning. N : neutral. With your foot on the brake, select this position to start. R : reverse gear. With the vehicle stationary, keep your foot on the brake pedal and push the gear lever forwards. D : automated mode. Move the lever backwards to select this mode. +/- : sequential mode with manual gear changing. P: park. To exit position P, raise the ring on the gear lever. R : reverse gear. With the vehicle stationary, keep your foot on the brake pedal and push the gear lever forwards. N : neutral. With your foot on the brake, this position also permits starting of the vehicle. D : automatic mode. Move the lever rearwards. +/- : manual mode with gear changing using the lever.
Temperature adjustment. Air distribution adjustment.

WIPERS

Exterior air intake. Interior air recirculation.
Front visibility setting.

LIGHTING

Air flow adjustment.
Rear screen demist/defrost.
FRONT SEAT ADJUSTMENT Manual adjustment Electric adjustment
Windscreen wipers Single wipe. Park. Intermittent (speed which can be adjusted manually). or Automatic rain sensitive (speed which can be adjusted manually). Slow. Fast. Rear wiper Park. Front foglamps and rear foglamps. Intermittent wipe. Wiping with screen wash. Seat back angle Ring A Lighting off. Forwards-backwards Automatic illumination of headlamps.

FOUR WHEEL DRIVE SYSTEM

Sidelamps.
Three transmission modes are available and can be selected manually by the driver to suit the circumstances: A. Two wheel drive (2WD), B. Four wheel drive (4WD AUTO), C. Four wheel drive (4WD LOCK). Height

Dipped or main beam headlamps. Ring B
The transmission mode is displayed in the form of an intermittent display on the instrument panel screen when the transmission mode is selected.
Fiche_loueur_C-Crosser_an_01-2012 2

02/07/2010 21:11:29

REAR SEATS (ROW 2) Folding the second row
Returning the second row to the normal position
REAR BENCH SEAT (ROW 3) Unfolding the bench seat
1. Open the tailgate and the lower 3. Pull the black strap C located at the tailgate. centre of the seat back to raise the seat back. 2. Pull the cover A from the rear and fix it to the seat back using the press stud of the band B.
4. Pull the black strap D to release the bench seat cushion.
5. Tilt the bench seat rearwards.
6. Raise the head restraints.
7. Lift and push the bench seat assembly forwards until it locks.
Folding the bench seat LOWER TAILGATE

LOAD SPACE COVER

Opening
Removing the load space cover. 1. Reel in the load space cover. 2. Move one of the slides C towards the inside of the vehicle and raise it. Release the opposite slide in the same way.
1. Open the tailgate and the lower tailgate. 3. Unlock the head restraints by sliding the 2. Lift the cover A and fix it to the seat back controls C and fold them onto the seat using the press stud of the band B. back.
4. Pull the grey strap D and bring the bench seat towards you. Press on the bench seat to lock it.

Closing

5. Tilt and push the bench seat forwards.
6. Pull the black strap E located at the centre of the seat back to fold the seat back.
Fiche_loueur_C-Crosser_an_01-2013 3

02/07/2010 21:11:32