Product End-of-Life Disassembly Instructions
Product Category: Notebooks and Tablet PCs Marketing Name / Model [List multiple models if applicable.] Name / Model #1 Compaq 510 Notebook Name / Model #2 Compaq 511 Notebook Name / Model #3 Compaq 610 Notebook Name / Model #4 Name / Model #5 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE). 1.0 Items Requiring Selective Treatment 1.1 Items listed below are classified as requiring selective treatment. 1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable. Quantity of items Item Description Notes included in product Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA) Batteries Mercury-containing components Liquid Crystal Displays (LCD) with a surface greater than 100 sq cm Cathode Ray Tubes (CRT) Capacitors / condensers (Containing PCB/PCT) Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height External electrical cables and cords Gas Discharge Lamps Plastics containing Brominated Flame Retardants Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner Components and waste containing asbestos Components, parts and materials containing refractory ceramic fibers Components, parts and materials containing radioactive substances EL-MF877-00 Template Revision A Include the cartridges, print heads, tubes, vent chambers, and service stations. With a surface greater than 10 sq cm All types including standard alkaline and lithium coin or button style batteries For example, mercury in lamps, display backlights, scanner lamps, switches, batteries Includes background illuminated displays with gas discharge lamps Page 1
2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable) Description #1 Motor-screw-driver + Description #2 Motor-screw-driver * Description #3 Motor-screw-driver - Cross head of screwdriver TORX T8 (2.31mm)
3.0 Product Disassembly Process 3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment: 1. 2. 3. 4. 5. 6. 7. 8. Follow steps described in Disassembly instruction (file attached). If parts can be removed without using a tool, remove it first. Use correct screwdriver and torque value before unlock the screw.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations).
EL-MF877-00 Template Revision A

Page 2

MANUFACTURING PROCESS INSTRUCTIONS MECHANICAL ASSEMBLY

MODEL : VV09

Sub-assembly name: Document No.: Written by: Date:
VV09 FA DIS-ASSY SOP VV09 FA DIS-ASSY

Zhang,Ying 2009/5/18

1.00 Revision: Page: 1 of 29
A.Current station version list: Station Version Station Version Station Version Station Version Station Version Station Version 1.00 1.00 1.00 1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.00 B.Version Modify list: Date Content Station 2009/5/18 ALL First SOP for mass production

Ver. 1.**

Design Sun,Amos

Auditor

Tabulator Zhang, Ying

Working Instruction

Document No. : SOP VV09 FA DIS-ASSY Disassemble Battery & COVER Name : Fig.1 1.Pull latch, slip battery, and take it out. Battery must be paralleled with machine when pushing out. (Fig.1) 2.Loosen screws of HDD Cover2 and DDR Cover1.Fig.2 Torsion2.0 0.2 kgfcm Screws can't be stripped. 3. Disassemble DDR Cover ,HDD Cover and WLAN Cover. Ver. : 1.00 Station : 1(1/1) Date :2009/05/18

WLAN Cover

Point for attention
If finding some defects, notice the gaffer and assistant Qty 1 Fixture listFixture standard Qty
Fixture listFixture standard Automatic crossing screw driver
Zhang Ying Tabulator_________

Issuing department

Document No. : SOP VV09 FA DIS-ASSY Name : Fig.1 1. Loosen screws of HDD1.Fig.1 Torsion2.0 0.2 kgfcm; Screws can't be stripped. 2. Loosen screws of ODD & K/B 3 (Fig.2 Torsion2.0 0.2 kgfcm; Screws can't be stripped. 3. Pull the puller and to Disassemble HDD. (Fig.1 Fig.2
Disassemble HDD& Loosen screws

Ver. : 1.00

Station : 2(1/1) Date :2009/05/18
Document No. : SOP VV09 FA DIS-ASSY Name : Loosen screws Station : Ver. : 1.00 Date 3(1/2) :2009/05/18
1. Loosen screws (6052B0096201) of SW cover. 14 Loosen screws *2, 15 Loosen screws *3 Torsion2.0 0.2 kgfcm; Screws can't be stripped. 15
Document No. : SOP VV09 FA DIS-ASSY Name : Loosen screws Station : Ver. : 1.00 Date 3 (2/2) :2009/05/18
1. Loosen screws (6052B0111701 ) *2 Torsion2.0 0.2 Kgfcm Screws can't be stripped or dropped into machine.
Document No. : SOP VV09 FA DIS-ASSY Name : Disassemble Antenna cable & ODD Station : Ver. : 1.00 Date 4(1/1) :2009/05/18
1. Disassemble Antenna cable from WLAN CARD 2. Take out ODD.Fig.1

Half Card

Long card

Without WLAN CARD

If finding some defects, notice the gaffer and assistant Qty Fixture listFixture standard Qty
Fixture listFixture standard
Document No. : SOP VV09 FA DIS-ASSY Name : Loosen screws of ODD Station : Ver. : 1.00 Date 5(1/1) : 2009/05/18
1. Loosen screws (6052B0097001) of ODD 14 Loosen screws *Loosen screws *3 Loosen screws with the sequence as figures showing Torsion2.0 0.2 Kgfcm Screws can't be stripped or dropped into machine.
Document No. : SOP VV09 FA DIS-ASSY Loosen screws of BTCB Name : Station : Ver. : 1.00 Date 6(1/1) : 2009/05/18
1. Loosen screws of BTCB (6052A0021901 ) * 4 Torsion2.0 0.2 Kgfcm Screws can't be stripped or dropped into machine.
2. Turn over the machine in the surface.
Fixture listFixture standard Automatic hexagonal screw driver
Document No. : SOP VV09 FA DIS-ASSY Name : Disassemble SW/C Station : Ver. : 1.00 Date 7(1/1) : 2009/05/18
1. Disassemble SW/C , Fig.1 g.: 6070B: 6070B0351101 Sequence:3 2. Turn over the K/B , Fig.2
Document No. : SOP VV09 FA DIS-ASSY Name : Disassemble SW/C&K/B FFC Ver. : 1.00 Station : 8(1/1) Date :2009/05/18

1. Loosen Lock piece, take out K/B FFC from MB CNTR. Fig.1 2. Disassemble SW/C&K/B.
Document No. : SOP VV09 FA DIS-ASSY Name : Station : Loosen screws Disassemble Speaker Ver. : 1.00 Date 9(1/1) : 2009/05/18
1. Disassemble Speaker CNTR.(Fig.4) 2. Loosen screws of Speaker 6039B0031401) 14 : 6052A0004501 * 3, Fig.: 6052A0004501 * 2, Fig.: 6052A0003501 * 1, Fig.3 Torsion2.0 0.2 Kgfcm Screws can't be stripped or dropped into machine. 14 Fig.4

Fig.Fig.2

Automatic crossing screw driver
Document No. : SOP VV09 FA DIS-ASSY Name : Disassemble LCM Cable Station : Ver. : 1.00 Date 10(1/1) : 2009/05/18

Fig.1

1. Disassemble LCM Cable CNTR 2. Disassemble Camera CNTR

Fig.2

Fig.3
Point for attention If finding some defects, notice the gaffer and assistant Qty Fixture listFixture standard Qty Fixture listFixture standard
Document No. : SOP VV09 FA DIS-ASSY Name : Station : Disassemble Antenna Cable Camera Cable Ver. : 1.00 Date 11(1/1) : 2009/05/18
1.Pull out Antenna cable along the slot of BTCB. (Fig.1). 2.Disassemble Antenna Cable ,Camera Cable.(Fig.2)
Document No. : SOP VV09 FA DIS-ASSY Name : Loosen screws of LCM ( For 14) Station : Ver. : 1.00 Date 12(1/2) : 2009/05/18
1. Loosen screws of LCM (6052B0098201 ) * 4 Torsion3.5 0.2 Kgfcm Screws can't be stripped or dropped into machine.
Point for attention If finding some defects, notice the gaffer and assistant Qty 1 Fixture listFixture standard Qty Fixture listFixture standard Automatic hexagonal screw driver
Document No. : SOP VV09 FA DIS-ASSY Name : Loosen screws of LCM( For 15) Station : 12(2/2) Ver. : 1.00 Date : 2009/05/18
Point for attention If finding some defects, notice the gaffer and assistant Qty 1 Fixture listFixture standard Qty
Document No. : SOP VV09 FA DIS-ASSY Name : 15
Station : Ver. : 1.00 Date

Loosen screws

13(1/1) : 2009/05/18
1. Loosen screws of TPCB. (6052B0098201) * 2 (for 14) (6052B0098201) * 2 (for 15) Torsion2.0 0.2 Kgfcm Screws can't be stripped or dropped into machine. 2. Turn over the machine in the surface. 3. Loosen screws of BTCB(6052A0021901 ) *2 Torsion2.0 0.2 Kgfcm Screws can't be stripped or dropped into machine.
Document No. : SOP VV09 FA DIS-ASSY Name : Disassemble TPCB Station : Ver. : 1.00 Date 14(1/1) : 2009/05/18
Fig.1 1. Disassemble TPCB (Fig.1) 2. Disassemble TPCB TOUCH PAD FFC from M/B(Fig.2)
Document No. : SOP VV09 FA DIS-ASSY Name : Fig.1. Loosen screws of Bluetooth (6052A0004501) *2 2. Disassemble Bluetooth Cable from MB CNTR (Fig.2) 3. Disassemble Cable and Bluetooth Torsion1.0 0.2 Kgfcm Screws can't be stripped or dropped into machine. Disassemble Bluetooth Ver. : 1.00 Station : 15(1/1) Date :2009/05/18

Document No. : SOP VV09 FA DIS-ASSY Name : Loosen screws of M/B and ODD extension board 14 Station : Ver. : 1.00 Date 16(1/1) : 2009/05/18

Fig.1 15

1. Loosen screws of M/B (6052A0034902) * 1 (Fig.1) Torsion2.0 0.2 Kgfcm Screws can't be stripped or dropped into machine. 2. Disassemble RJ11 Cable (Fig.1). The machine have not Modem, which disassemble the False shell (6051B0409801). (Fig.3).

FOR 15 ONLY

3. Loosen screws of ODD extension board (6052A0034902) *2 Torsion2.0 0.2 Kgfcm Screws can't be stripped or dropped into machine. False shell ODD/B screws
M/B screws Fig.3 Fig.2 Point for attention If finding some defects, notice the gaffer and assistant Qty 1 Fixture listFixture standard Qty
Document No. : SOP VV09 FA DIS-ASSY Name : Fig.1 1. Disassemble FAN Cable CNTR , Fig.2 Fig.3 2. Take out M/B Disassemble above the M/B first by right hand; Please don't touch LED light part while taking and fetching M/B. Disassemble FAN Cable and M/B Station : Ver. : 1.00 Date 17(1/1) : 2009/05/18
Fig.2 Point for attention If finding some defects, notice the gaffer and assistant Qty 1 Fixture listFixture standard Qty
Document No. : SOP VV09 FA DIS-ASSY Name : Disassemble FAN Station : Ver. : 1.00 Date 18(1/1) : 2009/05/18
1. Loosen screws of FAN (6052A0003501) * 2 Torsion2.0 0.2 Kgfcm Screws can't be stripped. 2. Take down FAN (6033B0019801).
Document No. : SOP VV09 FA DIS-ASSY Name : Station : Disassemble WLAN and Loosen screws Ver. : 1.00 Date 19(1/2) : 2009/05/18

Intel discrete

For platform without WLAN, neednt to disassemble WLAN 1. Put MB on supporting fixture. 2. Loosen two screws (6052A0034902) and take down WLAN. (Fig.1) 3. Loosen screws of thermal elastic*2 Torsion1.5 0.2 Kgfcm Screws can't be stripped.

AMD discrete

Fixture listFixture standard Automatic crossing screw driver VV09 M/B B side supporting fixture
Document No. : SOP VV09 FA DIS-ASSY Assemble Wireless Card Name : Ver. : 1.00 Station : 19(2/2) Date :2009/5/18

GOOD Fig.2

1. Pick and place 1PCS Wireless Card every time, only hold the two sides of RAM with figures(Fig.1) Wear the gloves, pay attention to ESD. Forbid pressing one side of Wireless Card and picking it on the other side(Fig.2 and Fig.3) Forbid holding the two surfaces of Wireless Card(Fig.4) Forbid fetching more than two Wireless Card at the same time(Fig.5) Several Wireless Card cant touch each other, especially the Golden figures(Fig.6) press one side Fetch more of Wireless than two Card and Wireless Card picking it on at the same the other side time

NG Fig.3 Fig.6

Several Wireless Card cant touch each other, especially the Golden figures hold the two surfaces of Wireless Card

NG Fig.4

Point for attention If finding some defects, notice the gaffer and assistant Qty Fixture listFixture standard Qty
Document No. : SOP VV09 FA DIS-ASSY Station : Name : Take down RAM and 15 ODD extension board Ver. : 1.00 Date Fig.1 1. Put MB on supporting fixture. 2. Take down DDR IF have two , need disassemble the two DDR 3.Tear the tape of acetic acid (6054A0076201 ) *1 and gasket (6054B0430101 )*1 from RJ11 Cable. (Fig.2) 20(1/1) : 2009/05/18
Fig.2 tape of acetic acid
4. Take down 15 ODD extension board , Fig.3

gasket

Document No. : SOP VV09 FA DIS-ASSY Name : Loosen screws and take down THERMAL Station : Ver. : 1.00 Date 22(1/2) : 2009/05/18
1. Put MB on supporting fixture.
2. Loosen four screws of Thermal Torsion1.5 0.2 Kgfcm Screws can't be stripped. Dont hold the Copper Pipe of Thermal. 3. Take down CPU Thermal.

AMD DIS

6043B0065101 6043B0065201 6043B0065301 6043B0065401
THERMAL MODULE,AMD,DISCRETE THERMAL MODULE,AMD,UMA THERMAL MODULE,INTEL,UMA THERMAL MODULE,INTEL,DISCRETE

AMD UMA

Document No. : SOP VV09 FA DIS-ASSY Name : Loosen screws and take down THERMAL Station : Ver. : 1.00 Date 22(2/2) : 2009/05/18
1. Put MB on supporting fixture. 2. Loosen four screws of Thermal Torsion1.5 0.2 Kgfcm Screws can't be stripped. Dont hold the Copper Pipe of Thermal. 3. Take down CPU Thermal.

Intel UMA

Intel DIS
Document No. : SOP VV09 FA DIS-ASSY Take out CPU Name : Fig.1 1. Put MB on supporting fixture. 2. Take down CPU from CPU SOCKET with suck pen. (take down it in counter clockwise) Station : Ver. : 1.00 Date 23(1/1) : 2009/05/18

OPEN Status

CLOSED Status
Fixture listFixture standard Flat screw driver suck pen VV09 M/B B side supporting fixture
Document No. : SOP VV09 FA DIS-ASSY Name : Take down MODEM and RJ11 cable Ver. : 1.00 Station : 24(1/1) Date :2009/05/18
Fig.1 1. Put M/B on supporting fixture 2. Loosen screws (6052A0034902) * 2 and take down MODEM from M/B , (Fig1,Fig2) 3. Take down RJ11 CABLE (6017B0119501 ) from Modem. (Fig.3) 2 Torsion1.5 0.2 Kgfcm Screws can't be stripped

MODEM 1 2

Fig.2
Document No. : SOP VV09 FA DIS-ASSY Visual inspect M/B Name : Station : Ver. : 1.00 Date 25(1/1) : 2009/05/18
1. Cosmetic inspecting Dont touch the LED lamp fetching M/B Inspect the cable manager dropped or not Inspect Audio Jack iron part coming off or not Inspect LCM CNTR PIN askew and cracked or not

LCM CNTR

Audio Jack

MIC Jack