ORDER DIRECTLY TODAY AT: www.BulbAmerica.com or CALL TOLL FREE 888-505-2111

INSTALLATION & SETUP

You can halve and double the length of any loop type while it is playing by turning the Loop Cut knob.

Denon DN-HC1000S

1. Connect your DN-HC1000S to an available USB port. 2. The Denon DN-HC1000S will be detected automatically and will be ready to use.

SAMPLE PLAYER

The Samp 1-3 and Samp 4-6 buttons allow you to use the left and right Cue 3, 4 and 5 buttons to trigger the Sample Player slots. Hold the Samp 1-3 button and press the left Cue 3, 4 and 5 buttons to trigger Sample Player slots 1, 2 and 3 respectively. Hold the Samp 4-6 button and press the right Cue 3, 4 and 5 buttons to trigger Sample Player slots 4, 5 and 6. You can load a track to a Sample Player slot by pressing Shift + Samp 1-3 + Cue 3, 4 or 5 for slots 1, 2 and 3 and by pressing Shift + Samp 4-6 + Cue 3, 4 or 5 for slots 4, 5 and 6.

BASIC OPERATION

Use the Back and Fwd buttons to move between the crate and library view and use the File Select knob to navigate through your selection. Use the A Load and B Load buttons to load the selected track to a deck.

USING CUE POINTS

Press the Cue 1-5 buttons for the left or right deck to trigger your set cue points in Scratch Live. If a cue point is not already set, pressing these buttons will set the cue point. Press Shift and Cue 1-5 to delete a cue point.

MIDI CHANNELS

The DN-HC1000S has four MIDI channels. Channel 1 is the default and is reserved for when using the DN-HC1000S as a native controller, leaving channels 2-4 free to be assigned to other functions in Scratch Live. You can choose the channel by pressing Shift + Files to select channel 1, Shift + Browse for channel 2, Shift + History for channel 3 and Shift + Prepare for channel 4. NOTE: When you unplug the DN-HC1000S it will remember the last MIDI channel used and will default to that when re-connected. When you connect the DN-HC1000S the Cue 1, 2, 3 or 4 buttons will flash to let you know which MIDI channel is currently being used. NOTE: When assigning the rotary knobs on the DN-HC1000S to functions in Scratch Live make sure the MIDI data type is set to relative on/off [to do this click the desired MIDI control, turn the rotary knob then press the C key to select the MIDI data type]

LOOPING

The DN-HC1000S allows control of manual loops, auto loops and loop rolls. Manual Loop Use the In button to set the loop in point and the Out button to set the loop out point. Once the out point is set the loop is saved to the track in the next available loop slot. You can adjust the loop in and out points by holding either In or Out and turning the Loop Cut knob, or you can fine adjust by holding Shift + In or Out and turning the Loop Cut knob. Auto Loop Use the Loop Cut knob to select the length of auto loop you want, then press Auto Loop to turn the loop on and off. Loop Roll Use the Loop Cut knob to select the length of loop roll you want then hold Loop Roll for the duration of time you wish to loop roll. NOTE: Auto Loop and Loop Roll require the track to have a correct BPM value.
SERATO SCRATCH LIVE 3RD PARTY CONTROLLER QUICKSTART 1.9.2
DN-HC1000S Controls Loop Roll Loop Cut Loop Sel Auto Loop In Fine Adjust In 5 Out Fine Adjust Out 6 Loop Reloop 7 Cue-1 (L) Clear Cue-1 (L) 8 Cue-2 (L) Clear Cue-2 (L) 9 Cue-3 (L) Clear Cue-3 (L) 10 Cue-4 (L) Clear Cue-4 (L) 11 Cue-5 (L) Clear Cue-5 (L) 12 Samp 1-3 Load 1-Next Fast Seek Forward 14 Prev Fast Seek Reverse 15 Tap

Scratch Live functionality (Shift functions in grey) Engages Loop Roll while the button is held down. Rotate the dial left to decrease loop length, rotate right to increase. Press to decrease the current loop by half. Scrolls through saved loops in the current track. Turns Auto Loop on and off. Sets loop in point. Hold In and turn the Loop Cut knob to adjust the loop in point. Hold these and turn the Loop Cut knob to fine adjust the loop in point. Sets loop out point. Hold Out and turn the Loop Cut knob to adjust the loop out point. Hold these and turn the Loop Cut knob to fine adjust the loop out point. Turns current loop on and off. Jumps to selected loop and turns loop on. Triggers cue point one on the left deck. If cue point one is not already set this button will set it. Clears cue point one on the left deck Triggers cue point two on the left deck. If cue point two is not already set this button will set it. Clears cue point two on the left deck. Triggers cue point three on the left deck. If cue point three is not already set this button will set it. Clears cue point three on the left deck. Triggers cue point four on the left deck. If cue point four is not already set this button will set it. clears cue point four on the left deck. Triggers cue point five on the left deck. If cue point fivee is not already set this button will set it. Clears cue point five on the left deck. Hold this and press Cue-1 (L), Cue-2 (L) or Cue 3 (L) to trigger sample player slots 1, 2 or 3. Hold these and press Cue-1 (L), Cue-2 (L) or Cue 3 (L) to load selected track to sample player slots 1, 2 or 3. Skip to the next track in your library/crate/playlist. Hold to move forward through the track at a very fast speed. Skip to the previous track in your library/crate/playlist. Hold to move backward through the track at a very fast speed. Tap to manually calculate the BPM for a track. Once you have tapped the BPM, leave for 5 seconds to save the value to the track.
DN-HC1000S Controls 16 + Fast Foward 17 Rewind 18 Censor
Scratch Live functionality (Shift functions in grey) Pitch bend up. Hold to move forward through the track at a fast speed. Pitch bend down. Hold to move backward through the track at a fast speed. Press to reverse playback temporarily. When released, playback resumes from where the playhead would have been had Censor not been pressed.
Keylock 19 Back Expand/Collapse Fwd A Load A-Inst. Double 22 B Load B-Inst. Double 23 File Select Rec 24 Files MIDI Channel Browse MIDI Channel History MIDI Channel Prepare MIDI Channel 29 Shift Cue-1 (R) Clear Cue-1 (R) 30 Cue-2 (R) Clear Cue-2 (R) 31 Cue-3 (R) Clear Cue-3 (R) 32 Cue-4 (R) Clear Cue-4 (R) 33 Cue-5 (R) Clear Cue-5 (R) 34 Samp 4-6 Load 4-6

Turns keylock on and off. Moves the cursor focus backwards through the open display panels. Expand or collapse the selected crate and its subcrates. Moves the cursor focus forwards through the open display panels. Loads selected track to the left deck (deck A). Instant doubles the track loaded on the right deck (B) to the left deck (A). Loads selected track to the right deck (deck B). Instant doubles the track loaded on the left deck (A) to the right deck (B). Scrolls through the tracks in your library/crate/playlist. Press to move between the Crates and Library views. Press to start and stop the record function. Opens the Files panel. Change to MIDI channel 1. Opens the Browse panel. Change to MIDI channel 2. Opens the History panel. Change to MIDI channel 3. Opens the Prepare panel. Hold Prepare to add the selected track to the Prepare panel. Change to MIDI channel 4. Press in conjunction with other buttons to access alternate functions. Triggers cue point one on the right deck. If cue point one is not already set this button will set it. Clears cue point one on the right deck. Triggers cue point two on the right deck. If cue point two is not already set this button will set it. Clears cue point two on the right deck. Triggers cue point three on the right deck. If cue point three is not already set this button will set it. Clears cue point three on the right deck. Triggers cue point four on the right deck. If cue point four is not already set this button will set it. Clears cue point four on the right deck. Triggers cue point five on the right deck. If cue point five is not already set this button will set it. Clears cue point five on the right deck. Hold this and press Cue-1 (R), Cue-2 (R) or Cue-3 (R) to trigger sample player slots 4, 5 or 6. Hold these and press Cue-1 (R), Cue-2 (R) or Cue-3 (R) to load selected track to sample player slots 4, 5 or 6.

DN-HC1000S

SeratoTM Scratch Live USB MIDI Sub-controller
Controlling essential features via mouse or laptop keyboard can be a challenge. Especially considering the focused work environment. This is your moment to keep the dance floor moving and music pumping without room for error. Enter the DN-HC1000S from Denon DJ. Designed to interface and aid DVS systems (turntables / CD players) with todays most popular DJ software program, *Scratch Live, the DN-HC1000S provides DJs a comfortable plug and play, reliable hardware controller for all major features and commands of the Scratch Live software system.

ADVANCED FEATURES

USB MIDI Sub-Controller for SeratoTM Scratch Live (Serato Approved) Dedicated Tactile Controls to Replace Computer Keyboard Shortcuts MIDI Mappable for other DJ Software Systems High-Quality Steel Cabinet with Rugged Rubber Keys Under 3lbs.

continued on next page

www.denondj.com

OTHER FEATURES

Pre-mapped Functions of Scratch Live FILE SELECT BACK FWD A-LOAD B-LOAD FILES BROWSE HISTORY PREPARE CUE-1 ~ CUE-5 CLEAR CUE POINTS 1 ~ 5 LOOP CUT LOOP ROLL AUTO LOOP RELOOP IN LOOP POINT OUT LOOP POINT EXIT LOOP CENSOR

continued

REVERSE TAP BPM SAMP 1 ~ 6 LOAD TO SAMPLE PITCH BEND TRACK SEARCH FAST SEARCH START AND STOP RECORDING INSTANT DOUBLE DECK A INSTANT DOUBLE DECK B CHANGE MIDI CH. TO NO.1, 2, 3, 4 (CH 2~4 is mappable) SELECT MANUAL LOOP SLOT KEY LOCK ON/OFF
*Requires Serato Scratch Live v.1.9.2 or higher and Rane/Serato Hardware SL1, SL3, MP4, or TTM57SL

SeratoTM Scratch Live

SeratoTM Scratch Live lightened the load for the professional traveling DJ. Heavy crates of records can be exchanged into a huge library of music that can be easily transported on a computer hard drive. Scratch Live software has an array of unique tools and performance features. Scratch Live Features: Beat Extraction Real Time Tempo Metering Unique color waveforms for easy identification of sound Multiple Cue and Loop Points per track Record Directly from a Microphone Record and Archive your precious Music Collection Fast Access to your Music Library and iTunes library integration Exclusive Access to Fresh Promotional Music with Whitelabel.net No Charge Upgrades that constantly add new features and improvements
DENON DJ USA 1100 Maplewood Drive Itasca, Illinois 60143 T: 630.741.0330 F: 630.741.0652 www.denondj.com 2009 D&M Professional. All Rights Reserved.
SeratoTM is a trademark of SeratoTM Audio Research. MAC is a registered trademark of Apple Incorporated in the United States and / or other countries. Windows is a registered of Microsoft Corporation in the United States and / or other countries. Windows is a registered trademark of Microsoft Corporation in the United States and other countries. The MAC logo is a trademark of Apple Inc., registered in the U.S. and other countries.