Professional DJ Multi-controller

DN-MC6000

Owners Manual

ENGLISH

DEUTSCH FRANAIS ITALIANO ESPAOL NEDERLANDS SVENSKA
IMPORTANT TO SAFETY WARNING: CAUTION
1.Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. When removing from wall outlet, be sure to remove by holding the plug attachment and not by pulling the cord. 2. o not open the rear cover D In order to prevent electric shock, do not open the top cover. If problems occur, contact your DENON DEALER. 3. o not place anything inside D Do not place metal objects or spill liquid inside the system. Electric shock or malfunction may result. Please, record and retain the Model name and serial number of your set shown on the rating label. Model No. DN-MC6000 Serial No. To reduce the risk of fire and electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus
FCC INFORMATION (For US customers)
1.COMPLIANCE INFORMATION Product Name: Professional DJ Multi-controller Model Number: DN-MC6000
This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation. Denon Professional div. D&M Professional 1100 Maplewood Drive Itasca, IL 60143 Tel. 630-741-0330
2.IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modification not expressly approved by DENON may void your authority, granted by the FCC, to use the product.

3.NOTE

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION

CAUTION:
T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the product into an outlet on a circuit different from that to which the receiver is connected. Consult the local retailer authorized to distribute this type of product or an experienced radio/TV technician for help. This Class B apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada.

Wir erklren unter unserer Verantwortung, da dieses Produkt, auf das sich diese Erklrung bezieht, den folgenden Standards entspricht: EN60950-1, EN55013, EN55020, EN61000-3-2 und EN61000-3-3. Gem den Bestimmungen der Niederspannungsrichtlinie 2006/95/EG und EMV Richtlinie 2004/108/EG, der Verordnung (EG) Nr. 1275/2008 der Kommission und deren Rahmenrichtlinie 2009/125/EG zu energieverbrauchsrelevanten Produkten (ErP).
ENVORMIGHEIDSVERKLARING E
Wij verklaren uitsluitend op onze verantwoordelijkheid dat dit produkt, waarop deze verklaring betrekking heeft, in overeenstemming is met de volgende normen: EN60950-1, EN55013, EN55020, EN61000-3-2 en EN61000-3-3. Volgens de voorzieningen van lage spanningsrichtlijn 2006/95/EC en EMC-richtlijn 2004/108/ EC, de EU-richtlijn 1275/2008 en de kaderrichtlijn 2009/125/EC voor energieverbruikende producten (ErP).
ECLARATION DE CONFORMITE D
Nous dclarons sous notre seule responsabilit que lappareil, auquel se rfre cette dclaration, est conforme aux standards suivants: EN60950-1, EN55013, EN55020, EN61000-3-2 et EN61000-3-3. Selon la directive 2006/95/EC concernant la basse tension et la directive CEM 2004/108/EC, la rglementation europenne 1275/2008 et la directive 2009/125/EC tablissant un cadre de travail applicable aux produits lis lnergie (ErP).

VERENSSTMMELSESINTYG

Hrmed intygas helt p eget ansvar att denna produkt, vilken detta intyg avser, uppfyller fljande standarder: EN60950-1, EN55013, EN55020, EN61000-3-2 och EN61000-3-3. Uppfyller reglerna i lgspnningsdirektivet 2006/95/EC och EMC-direktivet 2004/108/ EC, EU-frordningen 1275/2008 och ramverksdirektivet 2009/125/EC fr energirelaterade produkter (ErP).
ICHIARAZIONE DI CONFORMIT D
Dichiariamo con piena responsabilit che questo prodotto, al quale la nostra dichiarazione si riferisce, conforme alle seguenti normative: EN60950-1, EN55013, EN55020, EN61000-3-2 e EN61000-3-3. Facendo seguito alle disposizioni della direttiva sul basso voltaggio 2006/95/EC alla direttiva EMC 2004/108/EC, alla norma EC 1275/2008 e alla relativa legge quadro 2009/125/EC in materia di prodotti alimentati ad energia (ErP). QUESTO PRODOTTO E CONFORME AL D.M. 28/08/95 N. 548 D&M Professional Europe A division of D&M Europe B.V. Beemdstraat MA Eindhoven The Netherlands

A NOTE ABOUT RECYCLING:

This products packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with the local recycling regulations. When discarding the unit, comply with local rules or regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with the local regulations concerning battery disposal. This product and the supplied accessories, excluding the batteries, constitute the applicable product according to the WEEE directive.

Accessories

Basic operation 17
Basic operation 17 MIC (Mic input) 17 Headphone monitor 18 Check that the following parts are supplied with the product.
Conduction noise or interference noise may cause the DN-MC6000 to malfunction. Therefore, when connecting this device to a computer, connect using the USB cable included.
Part names and functions3
Top panel 3 q TRAKTOR3 w Virtual DJ5 e Mixer part7 Front panel 8 Rear panel8

USB settings18

Setting up USB audio output18 INPUT CH 1/4 output mode 18 REC OUT/MIC output mode18 USB audio mixing mode18 INTERNAL MIX output mode18 PC MIX output mode18 MIDI command input/output 19 Setting up MIDI output channels and checking their settings 19 MIDI control function 19
qOwners manual... 1 wAC adaptor... 1. eUSB cable... 1 r19-inch rack mount brackets.. 2 tScrews for attaching a 19-inch rack mount brackets. 12 yCD-ROM
DN-MC6000 Resource CD-ROM.. 1 DJ software... 1 U.S.A and Canada models: Virtual DJ European,U.K and Asia/Pacific models: TRAKTOR uWarranty (for North America model only). 1.

Connections9

Preparations9 Cables used for connection9 Input terminal connection9 Connecting external devices and MIC9 Output terminal connections10 Outputting to amps and recording 10 Connecting of the booth/send output terminal 10 Input/Output terminal connections 11 Connection to a computer 11 Connecting the power cord 11

Other functions22

Fader lock function22 Adjusting the touch sense sensitivity22
Troubleshooting23 Specifications24 Index25 System diagram 26
Installing and setting up supplied software12
Installing the ASIO driver (Windows only)12 Starting up13 About the control panel screen13 Installing TRAKTOR14 Installation onto a Windows computer14 Installation onto a MAC computer14 Installing Virtual DJ15 Installation into Windows computer15 Installation into MAC computers15 Setup16 Controlling two decks on the DJ software16 Controlling four decks with the DJ software (Using the mixer function of the DJ software) 16

About this manual

nnSymbols
v This symbol indicates a reference page on which related information is described. This symbol indicates a supplementary information and tips for operations. This symbol indicates points to remember operations or function limitations.

nnIllustrations

Note that the illustrations in these instructions are for explanation purposes and may differ from the actual unit.

Main features

1. Operability and highly reliable design for professional use Equipped with 4ch digital mixer that can operate independently with or without a computer connection for fail safe operation and backup. Equipped with an input selector for various input sources such as USB Audio and LINE. Each input channel includes a 3-band isolator EQ. 2. USB MIDI controller Equipped with a physical controller function that controls DJ software. Design layout optimized for operations with Virtual DJ and TRAKTOR. Easy operations for video effect and cross fade functions in Virtual DJ. Equipped with a deck layer function that can control four decks separately. Equipped with a high resolution jog wheel with 2,048 pulses supporting the touch sensor function. Equipped with large CUE/PLAY buttons that can be pressed easily. Equipped with the SYNC button that can immediately synchronize beats for two decks, when used with software. Equipped with the FX select function that can control two different FX separately, when used with software. High grade steel cabinet and self-illuminating rubber buttons. 3. USB AUDIO interface High sound quality design that supports sampling frequency of 48 kHz. Supports 2in-2out for stereo audio. Supports transfer of mixed audio to computers. Supplied with ASIO drivers for low latency. 4. MIC echo function Equipped with an echo function dedicated for MIC input. Echo volume can be adjusted with MIC echo adjustment knob. 5. Various input/output terminals The unit has the following input/output terminals. Input LINE/PHONO x2 AUX x2 MIC input x2 Output Master x1 Booth/send x1 (dual-purpose) REC output x1 Input/output USB audio x2 (stereo input x2/stereo output x2)

q Effect adjustment knob

(EFX.1/EFX.2/EFX.3/EFX.4) The behavior differs according to the TRAKTOR mode (ADVANCED EFX/CHAINED EFX). EFX.1 : Adjusts the effect balance. Hold o SHIFT and turn this knob to enter the following setting mode. In the ADVANCED EFX mode: Selects the effect type. In the CHAINED EFX mode: (Not available) EFX.2/EFX.3/EFX.4: In the ADVANCED EFX mode: Adjusts effect parameters. In the CHAINED EFX mode: Adjusts the effect level. Hold o SHIFT and turn this knob to enter the following setting mode. In the ADVANCED EFX mode: (Not available) In the CHAINED EFX mode: Selects the effect type.
e FX ON/OFF switch button (FX ON 1/2)
Sets the deck to effect slot 1 or 2.

q TRAKTOR

q w e r t y u i o Q0
r Deck focus switch button (DECK CHG.)
Indicates the selected deck with the button color. When DECK A or B is selected: The button lights blue. When DECK C or D is selected: The button lights red.
t Key lock button (KEY LOCK)
With this ON, the key does not change even if you adjust the tempo during playback.
W0 W1 W2 W3 W4 W5 W6 W7 W8
y Loop point setting button
(LOOP IN/LOOP OUT) Hold o SHIFT and press this button to clear the loop.
w FX ON/OFF switch button
(EFX.1/EFX.2/EFX.3/EFX.4) The behavior differs according to the setting mode (ADVANCED EFX/CHAINED EFX). EFX.1 : In the ADVANCED EFX mode: Switches the effect ON/OFF. In the CHAINED EFX mode: (Not available) EFX.2/EFX.3/EFX.4 : In the ADVANCED EFX mode: Switches effect parameters ON/OFF. In the CHAINED EFX mode: Switches the effect ON/OFF.
u Auto loop and loop size adjustment buttons
(AUTO LOOP /+) AUTO LOOP button switches auto loop ON/ OFF. /+ buttons adjust the loop size and beat interval. Hold o SHIFT and press these buttons to enter the following setting mode. AUTO LOOP : Opens the BEAT JUMP window. /+ : Performs BEAT JUMP at the set beat interval.

Q1Jog wheel

Searches playback points or performs the bend operation. Hold o SHIFT and turn this to search for the list.

W2Load button (LOAD A/B)

Loads the file selected by the track selection knob to DECK A or DECK B. Hold o SHIFT and press this button to load the file to DECK C or DECK D. Changes into duplicate function in TRAKTOR LE.
W6EFX window switch button (EFX) Hold o SHIFT and press this button to
allocate next MIDI CHANNEL to each DECK according to the ON/OFF state of the DECK CHG. mode. When DECK CHG. is blue DECK A. MIDI CHANNEL 9. DECK B. MIDI CHANNEL 11. When DECK CHG. is red DECK C. MIDI CHANNEL 10. DECK D. MIDI CHANNEL 12

Part names and Functions

Q2Fast-forward/Fast-rewind buttons

Performs auto beat matching. Hold o SHIFT and operate this button to set current Deck to the Master for SYNC feature.
(LOOP IN/LOOP OUT) Sets loop in points and loop out points. Hold o SHIFT and press this button to clear the loop.
(AUTO LOOP /+) AUTO LOOP button switches auto loop ON/OFF. /+ buttons adjust the loop size. Hold o SHIFT and press this button to move loop left/right by 4 beats. Hold Q0 SAMP. and press this button to adjust sample length by halving/doubling it.
The function differs according to the window. BROWSER: elects the video transition type. S SAMPLER : djusts the sample level for A DECK A. EFFECTS : djusts the parameter 1 for the A selected effect. RECORD : (Not available)
The function differs according to the window. BROWSER: oads song on left or right deck. L SAMPLER : Selects sampler deck. EFFECTS : Selects effect deck. RECORD : (Not available)
The function differs according to the window. BROWSER: Virtual DJ Pro: witches among folders, S songs, playlist and the side list. Virtual DJ LE : witches among folders and S songs. SAMPLER : Selects the sample. EFFECTS : witches between sound S effects, video effects, and video transition. RECORD : (Not available)
W7SAMPLE window switch button (SAMPLE)
Displays the SAMPLER window. Hold o SHIFT and press this button to allocate next MIDI CHANNEL to each DECK according to the ON/OFF state of the DECK CHG. mode. When DECK CHG. is blue DECK A. MIDI CHANNEL 5. DECK B. MIDI CHANNEL 7. When DECK CHG. is red DECK C. MIDI CHANNEL 6. DECK D. MIDI CHANNEL 8
Turn or press the knob to select the file. The function differs according to the window. Turn the track selection knob BROWSER: crolls through the file/folder S list. SAMPLER : Selects the sample. EFFECTS : Selects the effect. RECORD : (Not available) Hold Q0 SAMP. and operate this knob to select samples. Press the track selection knob BROWSER: Songs : dds songs to the play list. Hold A o SHIFT and press this button to add songs to the side list. Function only available in Virtual DJ Pro. Folders : elects the folders. S Hold o SHIFT and press this button when sub-folders exist to open/close sub-folders within the browser tree. SAMPLER : lays back the sample. Hold P o SHIFT and press this button during sample playback to play back the sample from the beginning again (Stutter function). EFFECTS : witches the effect ON/OFF. S RECORD : tarts/stops recording. S Hold o SHIFT and press this button to start/stop recording next track.

iStandby mode selector switch
(STANDBY MODE ON/OFF) ON: Enables the auto standby function. OFF: Disables the auto standby function.
eDC IN jack (DC IN) (11) rPower switch (POWER) (17) tUSB terminal (USB) (11) yPC/MAC selector switch (PC MAC) (11)
Switch this according to the OS running on the computer connected to the unit.

Q3Record output terminal

(REC OUT) (10)

Q4AUX 1/2 input terminal

(AUX 1/2 IN) (9)
Q5Line 1/2 input terminal

(LINE 1/2) (9)

uMixing mode selector switch

(MIXING MODE) (18)

Q6Input selector switch

(LINE/PHONO) (9)

tCross fader contour adjustment knob
(X FADER CONTOUR) (17) Adjusts the cross fader curve. You can also adjust the cross fader curve for DJ software.

nnAuto standby function

iUSB audio output source selector switch

(OUTPUT SOURCE) (18)

Q7Signal ground terminal

(SIGNAL GND) (9)

With the power ON, if the unit is not operated for about eight hours, or if no signal is passing to the current input source for about eight hours, the unit automatically enters standby mode.
oBooth/send output terminal
(BOOTH/SEND OUT BALANCED) (10)
Q8Balanced MIC input terminal

(MIC2) (9)

Q9Balanced MIC input terminal

(MIC1) (9)

Do not plug in the power cord until all connections have been completed. When making connections, also refer to the operating instructions of the other components. Insert the plugs securely. Loose connections will result in the generation of noise. Be sure to connect the left and right channels properly (left with left, right with right). Connect the cables to the correct input and output terminals. Do not bundle power cords together with connection cables. Doing so can result in humming or noise.
Input terminal connection
Connecting external devices and MIC

External device 2

The Next> button can now be selected.
If you want to create the icon, select the check box and click Next >.
7 When the following installation completion screen is displayed, click Close.

nnUninstalling

To uninstall the ASIO driver, use Control Panel.

Starting up

When the DENON DJ ASIO drivers ASIO Control Panel is called out from the host application, the DENON DJ ASIO driver displays the ASIO control panel.

qDevices (Device list)

This window is used for automatically displaying all connected DENON DJ devices in a list. (Example: DN-MC6000) When you select a device you want to set from this list, the current settings of the selected device appear in a window u (Device Description). If you double-click a device, the ASIO device status is switched from Enable to Disable or vice versa. ASIO device status Enable : check mark appears on the left side A of a device name and the name is highlighted (bold). Disable : he check mark on the left side of T a device name is removed and the device name is displayed in lightface.

rOK/Cancel

OK: Use this button to close the ASIO control panel, reflecting the changes to the settings. Cancel: Use this button to close the ASIO control panel without reflecting the changes to the settings.
About the control panel screen

tBit Resolution

Selected bit resolution is displayed.

ySampling Rate

The sampling rate selection is displayed here. The frequencies with which the DENON DJ ASIO driver is compatible are as follows: 44.1kHz/48kHz/96kHz

uDevice Description

This is the area in which information for the device selected in the device information list is displayed. The following are displayed: Device name Unit number Software version Audio input channels Audio output channels Sampling frequency Max bit resolution Audio buffer size
You can select one device at a time. You can set multiple devices to enable at the same time.

wEnable/Disable

This button is used for switching a device selected in q to enable or disable as an ASIO device.
You can also switch the status of an ASIO device by double-clicking the device name. If the devices information cannot be acquired, (hyphens) are displayed for all items.

eAudio Buffer Size

Use this slider to adjust the buffer size.
The range of values is 88 to 2048 (sample units), in steps of 1 ms. When you set multiple devices to enable as ASIO devices, the same setting values apply to all ASIO devices.

Installing TRAKTOR

Use the following steps to install the DJ software TRAKTOR in the supplied CD-ROM.
Installation onto a Windows computer
1 Insert CD-ROM TRAKTOR into your computer. 1 Insert CD-ROM TRAKTOR into your computer. 2 Double-click the TRAKTOR CD icon. 2 Double-click Traktor Setup.exe. 3 Double-click Traktor Installer.
The browse screen for the disc drive is displayed. If the browse screen is not displayed, click the disc drive on My Computer. A window opens and the TRAKTOR installation starts. The TRAKTOR CD icon is displayed on the desktop. Files contained in the TRAKTOR CD are displayed for browsing. A window opens and the TRAKTOR installation starts. Select Complete installation or Custom installation to start installation. If you are unsure about the Custom installation, select the Complete installation option.
Installation onto a MAC computer
3 Follow each step in the installation screen for installation. 4 Follow each step in the installation screen for installation. When the installation completes, close the installation 4 screen. 5 When the installation completes, close the installation screen.
After the installation, activate the software. For information about how to activate the software, see Service Center Manual, which is located in the Documentation folder under the Service Center folder that is created during the installation. It is recommended that you use the latest version of the TRAKTOR software. For information about how to use the DJ software, see the instruction manual for the DJ software or the help menu. The serial number is printed on the back of the CD-ROM case. TRAKTOR is an NI software. To install and use the software, you have to accept the software license agreement. D&M shall not be responsible for any problems with your computer and other software that may arise from the installation and use of TRAKTOR.
Select Complete installation or Custom installation to start installation. If you are unsure about the Custom installation, select the Complete installation option.

Installing and setting up supplied software Basic operations
USB settings Other functions Troubleshooting Specifications Index System diagram

Installing Virtual DJ

Use the following steps to install the DJ software Virtual DJ in the supplied CD-ROM.
Installation into Windows computer
1 Insert CD-ROM Virtual DJ into your computer. 1 Insert CD-ROM Virtual DJ into your computer. 2 Double-click the Virtual DJ icon. 2 Double-click install_virtualdj_le_vxx.exe. 3 Double-click install_virtualdj_le_vxx.dmg.
The browse screen for the disc drive is displayed. When the browse screen is not displayed, click the disc drive on My Computer. A window opens and the Virtual DJ installation starts. The Virtual DJ icon is displayed on the desktop. Files contained in the Virtual DJ are displayed for browsing. A window opens and the Virtual DJ installation starts. xx represents the version number. GExampleH Ver.7 : install_virtualdj_le_v7.0.exe
Installation into MAC computers
The Virtual DJ icon is created on the desktop. The Virtual DJ icon is created on the desktop. When you start Virtual DJ for the first time after installation, follow the instructions on the screen to enter the product serial number. It is recommended that you use the latest version of Virtual DJ. For information about how to use the DJ software, see the instruction manual for the DJ software or the help menu. The serial number is printed on the back of the CD-ROM case. Virtual DJ is an Atomix Productions software. To install and use the software, you have to accept the software license agreement. D&M shall not be responsible for any problems with your computer and other software that may arise from the installation and use of Virtual DJ. When you start Virtual DJ for the first time after installation, follow the instructions on the screen to enter the product serial number. It is recommended that you use the latest version of Virtual DJ. For information about how to use the DJ software, see the instruction manual for the DJ software or the help menu. The serial number is printed on the back of the CD-ROM case. Virtual DJ is an Atomix Productions software. To install and use the software, you have to accept the software license agreement. D&M shall not be responsible for any problems with your computer and other software that may arise from the installation and use of Virtual DJ.
xx represents the version number. GExampleH Ver.7 : install_virtualdj_le_v7.0.dmg
This section describes how to set up DJ software based on your operation environment. Set this according to the OS of your computer. PC : Sets the USB audio interface for ASIO driver support. MAC : Sets the USB audio interface for Core Audio support.

Select this mode when you want to mix audio signals that are played back on DJ software with CH2/CH3 of DN-MC6000 instead of using the mixer function of DJ software. When you set the mixing mode selector switch to INT MIX, audio signals that are input from the USB terminal are set as follows. USB 1/2 channels: Output from the USB1/2 channels to the computer. USB 3/4 channels: Output from the USB3/4 channels to the computer.

REC OUT/MIC output mode

This mode outputs audio signals for the REC OUT output and MIC input to the computer. When you set the USB audio output source selector switch to REC OUT/MIC, the audio signals output from the USB audio output terminal are set as follows. REC OUT output : utput from the USB1/2 channels to the O computer. MIC input : utput from the USB3/4 channels to the O computer.
PAN to adjust the 3 Rotateand master sound. balance between the CUE sound 4 Adjust the headphone volume using PHONES LEVEL.
When using headphones, be cautious to avoid prolonged loud volume in order to protect your ears. If the volume is turned too high, audio from the headphones may automatically be cut off. Lower the volume so that the audio can output again, and then adjust the volume to a suitable level.
With the mixing mode selector switch set to INT MIX, MIDI commands are not issued even when you operate CH2/CH3 of the unit.

PC MIX output mode

Select this mode when you mix audio signals that are mixed on DJ software with the internal bus of DN-MC6000. When you set the mixing mode selector switch to PC MIX, audio signals that are input from the USB terminal are set as follows. USB 1/2 channels: Input to the master bus of DN-MC6000. USB 3/4 channels: Input to the CUE bus of DN-MC6000.
Other functions Troubleshooting Specifications Index
With the mixing mode selector switch set to PC MIX, MIDI commands are issued when you operate CH2/CH3 of the unit. Therefore, if the DJ software supports four decks, you can control mixing for four decks by operating from the unit.
Set up the audio output settings for DJ software according to the mixing mode on the unit.

System diagram

MIC1/2 LEVEL SHIFT SAMPLE EFX
Channel input source switch knob
MIDI command input/output
This unit supports USB MIDI output. Almost all MIDI control functions are supported. Controls are divided into the following blocks and assigned MIDI channels.

DECK CHG.

SHIFT BACK FWD SHIFT
Range of CH1, CH5, CH9, and CH13 zThe range within the dotted frame is enabled when z DECK CHG. is blue.

The sound is distorted. This unit does not operate properly, or there is no sound.

17 18, 19

Sound cuts out or is distorted.
The button lights are dim.

Specifications

nn Audio
PHONO inputs Input impedance: Level: Signal to Noise ratio: LINE inputs Input impedance: Level: Signal to Noise ratio: AUX Input Input impedance: Level: Signal to Noise ratio: Equalizer (LINE) Channel EQ Adjustment Range: (0 dBu=0.775 Vrms, 0 dBV =1 Vrms) 2 Stereo Unbalanced RCA terminal 50 k 40 dBV(10 mV) Over 87 dB 2 Stereo Unbalanced RCA terminal 10 k 0 dBV Over 90 dB 2 Stereo Unbalanced RCA terminal 10 k 0 dBV 90 dB or later 3 Band HI (High Range) : , 90 dB +10 dB MID (Medium Range) : , 90 dB +10 dB LOW (Low Range) : , 90 dB +6 dB 2 Monaural Combo jack (terminal for balanced XLR and balanced 1/4 inch TRS) (1: ground, 2: hot, 3: cold, chip: hot, ring: cold, sleeve: ground) Balanced 1/4 inch TRS terminal 10 k dBV 3 Band HI (High Range) :15 +15 dB MID (Medium Range) :15 +15 dB LOW (Low Range) :15 +15dB 2 Stereo(4 Monaural) 16 bit, Fs:48 kHz USB B Stereo, balanced XLR terminal (1: Ground, 2: Hot, 3: Cold) 24 bit Over 600 Level: Frequency response: THD: Crosstalk: Unbalanced: Load impedance: Level: REC Output Load impedance: Level: BOOTH/SEND Output Load impedance: Level: Headphone output Load impedance: Level: USB audio output + 4 dBu (Max + 24 dBu) When RL=10 k 20 Hz 20 kHz(0.5 dB) Less than 0.05% Less than 100 dB (1 kHz) Stereo RCA terminal 10 k 0 dBu (Max + 20dBu) Stereo Unbalanced RCA terminal 1 k 10dBV (Max +10dBV) Stereo balanced 1/4 inch TRS terminal Over 600 + 4 dBu (Max + 24 dBu) When RL=10 k Stereo mW 4 Stereo (8 Monaural) 16 bit, 48 kHz USB B IN:1ch, OUT:1ch MIDI1.0, MIDI Clock USB B PPM 10 Point LED-20 + 10 dB, Peak PPM 10 Point LED-20 + 10 dB, Peak 45 mm Slim Type fader 45 mm FLEX Fader (Fader Torque Adjustable) DC12V (the unit) AC 120 V, 60 Hz AC 230 V, 50 Hz DC 12V 3A 24 W (Less than 0.45 W during standby) +5 C +35 C 25 % 85 % 20 C 60 C

nn Dimensions

Width: Height: Depth: Weight:

11.0 mm (0.4)

460.0 mm / 18.1 50.0 mm / 2.0 255.0 mm / 10.0 4.6 kg (10 lbs 2.26 oz)

255.0 mm (10.0)

17.7 mm (0.7) 21.5 mm (0.9) 50.0 mm (2.0)

460.0 mm (18.1)

nn General
USB MIDI I/O: CH Meter: MASTER Meter: CH Fader: Cross Fader: Power voltage: AC adapter input: U.S.A. and Canada models: European,U.K. and Asia/ Pacific models: AC adapter output: Power consumption: Operating temperature: Operating humidity: Storage temperature:

When mounting a rack

38.5 mm (1.5) 178.0 mm (7.0) 482.6 mm (19.0) 465.0 mm(18.3) 38.5 mm 178.0 mm (1.5) (7.0) 10.3 mm 7.1 mm (0.3) (0.4) 11.0 mm (0.4)

MIC inputs MIC 1:

MIC 2: Input impedance: Level: Equalizer (MIC/AUX1) Adjustment Range:
USB audio inputs MASTER output Balanced: DA converter: Load impedance:

2.0 mm (0.1) 444.0 mm (17.5) 446.6 mm (17.6)
zFor the purpose of improvement, the specifications and design are subject to change without notice. z
AC adapter 11 ASIO driver 12 Auto standby function 8
MIC 17 MIDI command 19, 20 MIDI control 19 MIDI output channels 19
Cable 9 Balanced cable 9 Balanced phone plug cable 9 Coaxial cable for MIC 9 RCA pin plug cable 9 USB cable 9 Connection 9 Balanced main amp 10 Balanced MIC 9 Balanced monitor amp 10 CD player 9 Coaxial MIC 9 Computer 11 External device 9 External effect processor 10 Power cord 11 Recorder 10 Turntable 9 Unbalanced main amp 10 Cross fader 17
Power on/off (standby) 17

Rear panel 8

Top panel 3, 5, 7 TRAKTOR 3, 14
USB audio 18 USB settings 18

Virtual DJ 5, 15

Ducking 17

Front panel 8

Headphone monitor 18
Before use Connections USB settings Troubleshooting Specifications Index System diagram
Part names and Functions Basic operations Other functions

MONO/ STEREO SW

MONO Mix BALANCE Matrix

PRE EQ

INT MIX SW

PC MIX

USB 1/2 /

USB 3/4 /

SPLIT CUE Matrix

(MONO)

USE IT. LIVE IT.

DN-MC6000

Full Mixer / 4deck MIDI Controller

Features

Computer Independent 4-Channel, 8 Source Premium Digital Mixer Slim Midi Mappable Tabletop design for various DJ applications and portability Includes 19 rackmount accessory kit for Mobile DJs Optimized for *Traktor and *Virtual DJ users Intuitive 4 deck software control, with visible deck colour change Real-time Matrix Operation, Analog Sources, USB MIDI & USB Audio Included USB Audio Interface (Soundcard) 2in/2out (stereo) MAC OSX Windows XP/Vista/Win7 Compatible New, 3-way Powerful Video / Audio Assignable cross-fader Newly designed, high resolution 105mm Touch-Sensitive Jog Wheel Smooth 100mm long Pitch Slider with high 14-bit resolution Pitch/Fader/Volume Lock function - holds the last known Audio value and posi tion until the NULL point is reached again File browse navigation keys & rotary encoder file selector knob w/illuminated ring 8 (4 + 4) Hot Cue/Sampler buttons w/dual bank selector key Auto Loop Button w/ Beat Jump (Loop Cut) Manual Loop In/Out buttons Large size Cue & PLAY buttons Various EFX control, EFX keys & Parameter knobs Various GUI control, Mixer, Video, Scratch, Sampler, REC, Powerful Shift Key - used for various dual button operation Search Keys (<< >>) to advance around within the file Denons legacy Pitch Bend keys Vinyl & Pitch Bend Jog modes SYNC key for beat matching between decks Key Lock on/off button with LED confirmation Matrix Input Assignment Selector Knob Selectable PFL input gain & program meters Independent CUE System (all channels) Split Cue function with Cue/Master pan knob High quality, high output Headphone Amp 45mm Channel & Cross Faders Independent Channel A-B Thru Switch (crossfader) Cross Fader contour adjustment Independent 3-Band Channel EQ w/Kills (High-Mid-Low) XLR Balanced & RCA Unbalanced Master Output Master Output Stereo/Mono switch Booth Output w/Source Selector & level control XLR & 1/4 TRS Mic Inputs with 3-Band EQ (High-Mid-Low) for Mic 1 & 2 Mic Ducking & Built in Echo Effect for Mic 1 & 2 Various Utility presets to customize user settings Firmware upgradable over USB Solid Steel chassis construction with KensingtonTM lock terminal
Denon DJ is excited to introduce the DN-MC6000 Full Mixer / 4deck MIDI Controller, a four-channel/eightsource standalone digital DJ mixer with MIDI interface and internal sound card. Complete with an astounding amount of features, real-time channel matrix operation, slim table top design, state-of-the-art solid steel chassis construction and quality sound, the DN-MC6000 will quickly become a table top standard for those Professional Club and Mobile DJs, who are looking for a centre piece to their software-based DJ rig.
Bundled with Traktor LE, the DN-MC6000 is MIDI-mapable and compatible with other popular DJ programs as well. This state-ofthe-art controller interfaces seamlessly with Mac OSX and Windows XP, Vista and Windows 7 operating systems and unlike other com parable products, the DN-MC6000 includes a selectable Video / Audio control cross fader feature ideal for those DJs who (or plan to) integrate video into their sets. Each side of the unit can control up to two decks (for a total of four), with visible deck colour change for intuitive, straightforward operation. Also notable is the fact that the DN-MC6000 is a real mixer, able to process audio inputs for external devices without a connection to a computer, as a dedicated mixer unit would.
DISCOVER MORE AT WWW.DENONDJ.EU