CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO

CAUTION:
PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. LABELS (for U.S.A. model only)
CERTIFICATION THIS PRODUCT COMPLIES WITH DHHS RULES 21 CFR SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURE. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.
1. Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. When removing from wall outlet, be sure to remove by holding the plug attachment and not by pulling the cord. 2. Do not open the tp cover In order to prevent electric shock, do not open the top cover. If problems occur, contact your DENON dealer. 3. Do not place anything inside Do not place metal objects or spill liquid inside the CD player. Electric shock or malfunction may result. Please, record and retain the Model name and serial number of your set shown on the rating label. Model No. DN-S1000 Serial No. NOTE: This CD player uses the semiconductor laser. To allow you to enjoy music at a stable operation, it is recommended to use this in a room of 5 C (41 F) 35 C (95 F). CLASS 1 LASER PRODUCT LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT
FCC INFORMATION (For US customers)

1.PRODUCT

This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation.
10. Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturers instructions have been adhered to. 11. Power Sources This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. 12. Grounding or Polarization This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

Do not let insecticides, benzene, and thinner come in contact with the set. Lassen Sie das Gert nicht mit Insektiziden, Benzin oder Verdnnungsmitteln in Berhrung kommen. Ne pas mettre en contact des insecticides, du benzne et un diluant avec lappareil. Assicuratevvi che lunit non venga in contatto con insetticidi, benzolo o solventi. No permita el contacto de insecticidas, gasolina y diluyentes con el equipo. Laat geen insektenverdelgende middelen, benzine of verfverdunner met dit apparaat in kontakt komen. Se till att inte insektsmedel p spraybruk, bensen och thinner kommer i kontakt med apparatens hlje.
* (For sets with ventilation holes) Do not obstruct the ventilation holes. Die Belftungsffnungen drfen nicht verdeckt werden. Ne pas obstruer les trous daration. Non coprite i fori di ventilazione. No obstruya los orificios de ventilacin. De ventilatieopeningen mogen niet worden beblokkeerd. Tpp inte till ventilationsppningarna.
Never disassemble or modify the set in any way. Versuchen Sie niemals das Gert auseinander zu nehmen oder auf jegliche Art zu verndern. Ne jamais dmonter ou modifier lappareil dune manire ou dune autre. Non smontate mai, n modificate lunit in nessun modo. Nunca desarme o modifique el equipo de ninguna manera. Nooit dit apparaat demonteren of op andere wijze modifiren. Ta inte isr apparaten och frsk inte bygga om den.
CAUTION The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. No naked flame sources, such as lighted candles, should be placed on the apparatus.
Please be care the environmental aspects of battery disposal. The apparatus shall not be exposed to dripping or splashing for use. No objects filled with liquids, such as vases, shall be placed on the apparatus.
DECLARATION OF CONFORMITY We declare under our sole responsibility that this product, to which this declaration relates, is in conformity with the following standards: EN60065, EN55013, EN55020, EN61000-3-2 and EN610003-3. Following the provisions of 73/23/EEC, 89/336/EEC and 93/68/EEC Directive. BEREINSTIMMUNGSERKLRUNG Wir erklren unter unserer Verantwortung, da dieses Produkt, auf das sich diese Erklrung bezieht, den folgenden Standards entspricht: EN60065, EN55013, EN55020, EN61000-3-2 und EN610003-3. Entspricht den Verordnungen der Direktive 73/23/EEC, 89/336/EEC und 93/68/EEC. DECLARATION DE CONFORMITE Nous dclarons sous notre seule responsabilit que lappareil, auquel se rfre cette dclaration, est conforme aux standards suivants: EN60065, EN55013, EN55020, EN61000-3-2 et EN610003-3. Daprs les dispositions de la Directive 73/23/EEC, 89/336/EEC et 93/68/EEC. DICHIARAZIONE DI CONFORMIT Dichiariamo sotto nostra responsabilit che questo prodotto, al quale si riferisce la presente dichiarazione, conforme ai seguenti standard: EN60065, EN55013, EN55020, EN61000-3-2 e EN61000-33. In base alle disposizioni delle direttive 73/23/CEE, 89/336/CEE e 93/68/CEE.

POUR LES MODELE CANADIENS UNIQUEMENT
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION

POUR VITER LES CHOCS LECTRIQUES, INTERODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU AU FOND.
CAUTION: DO NOT USE THE DENON AMC-22 CD PICK-UP LENS CLEANER FOR THIS PRODUCT. THIS MIGHT DAMAGE THE LASER PICK-UP OF THIS PRODUCT. ACHTUNG: VERWENDEN SIE NICHT DEN CD-ABTAST-LINSENREINIGER DENON AMC-22 FR DIESES PRODUKT. SOLLTEN SIE DIES NICHT BEACHTEN, KNNTE DER LASERABTASTKOPF DIESES PRODUKTES BESCHDIGT WERDEN. ATTENTION : NUTILISEZ PAS LE NETTOYEUR DE CAPTEUR DOBJECTIF CD DENON AMC-22 POUR CE PRODUIT. CECI POURRAIT ENDOMMAGER LE CAPTEUR LASER DE CD DE CE PRODUIT. AVVERTENZA: NON UTILIZZARE LUNIT DI PULITURA DELLE LENTI DEI CD DENON AMC-22 PER QUESTO PRODOTTO, POICH POTREBBE DANNEGGIARE IL DISPOSITIVO LASE DEL PRODOTTO. PRECAUCIN: NO UTILICE EL LIMPIADOR DE OBJETIVO DEL DETECTOR DE CD DEL DENON AMC-22 PARA ESTE PRODUCTO. ESTO PUEDE DAAR EL DETECTOR LASER DE ESTE PRODUCTO. OPGELET: GEBRUIK DE PICK-UPLENSREINIGER VAN DE DENON AMC-22 NIET VOOR DIT PRODUCT. DIT KAN DE LASER PICK-UP VAN DIT PRODUCT BESCHADIGEN. FRSIKTIGT: ANVND INTE LINSAVPUTSAREN FR DENON AMC-22:NS CD-PICKUP FR DENNA PRODUKT. DET KAN SKADA PRODUKTENS LASERPICKUP.

TABLE OF CONTENTS

9. ON BOARD EFFECTS Seven types of effectors are included. ECHO/LOOP:The ECHO and LOOP functions can be selected. Looping for the feedback time (ECHO LOOP) is possible by setting the feedback number to MAX. FLANGER:The feedback time and feedback gain can be selected. FILTER: One of three filters (LOW PASS, MID PASS and HIGH PASS) can be selected and Individually adjusted. 10. PLATTER MODE Analog turntable-like playback can be simulated using three Platter effects. DRAG START: Simulates the dragging sound of a turntables slow starting up from a stop mode. (Start-up time can be adjusted.) BRAKE: Simulates a winding-down sound of a turntable coming to a full stop slowly. (Slowing-down time can be adjusted.) RVS: (Reverse) Plays the sound backwards until you return to normal play. 11. MEMO Various settings such as Cue Point, Hot Start, AB Loop, Pitch and Key Adjust can be saved to the internal non-volatile memory for later recall. Up to 1000 points are available. 12. PITCH/KEY ADJUST PITCH: Playback speed is adjusted with PITCH slider. Adjustable pitch ranges are +/ 4, 10, 16, 24, 100% (selectable live). KEY ADJUST: Keeps the original key even if the pitch playing speed is changed with the PITCH slider. 13. DIGITAL OUT The digital output for Main provides a true 100% digital signal without any restrictions or limitations regardless of pitch change or mode setting. 14. FADER START The DN-S1000 FADER START controls are compatible with our DN-X300 or DN-X100 mixers. 15. SHOCKPROOF MEMORY 20 seconds of shock-proof memory guards against audible interruptions due to external mechanical shocks such as bumps or other hard vibrations, which is especially helpful for the mobile DJ as well as for nightclub-installed applications. 16. PRESETS It is possible to customise the machine to your preference by saving your favourite setting to internal memory. For items found in the presets, please see page 19. 17. CD TEXT 18. CD-R/RW Play Back This player can play CD-R/RW discs, but only if they are finalized. Note however that depending on the recording quality, the player may not be able to play some finalized CD-R/RW discs. 19. Power on Play The player can be set so that playback in the relay mode starts when the power is turned on. 20. Scratch Stroke This unigue feature found in the presetmode allows the user to select a comfortable stroke distance for scratching Long is set for wide pattern strokes and Short is set for small pattern strokes.

z x c v b n m ,. 0

Main features...6 Connections/Installation..7 Part names and functions.8 ~ 10 Compact discs..10 Basic operation..11 Next Track...12 Scratch..12 Seamless loop/Hot start/Stutter..13 B trim...14 Auto BPM Counter/Effector..14, 15
MP3 playback...16 Platter effect...17 Memo (Custom setting memory).18 Preset...19 Specifications...20

ACCESSORIES

Check that the following parts are included in addition to the main unit: q Operating instructions..1 w Connection cords for signal output (RCA).1

1 MAIN FEATURES

Congratulations on your new purchase of the DN5. S1000. The DN-S1000 table top single CD/MP3 player is equipped with a variety of advanced features, functions and rich performance for unlimited creativeness and showmanship. HOT START and STUTTER The Hot Start function lets you start playback immediately from a set point decided by you. Up to two points can be set using the A1 and A2 buttons. The loaded Hot Starts can also be used to Stutter those same points. When in Stutter mode, momentary audio is triggered according to the length of time of which these buttons are held down and released. SEAMLESS LOOP With this function, any section on a disc can be played repeatedly between A & B points with no break in sound or limit in length. The DN-S1000 has a variety of looping options such as Exit, Reloop and dual looping. B TRIM The B points for the Seamless Loop can easily be adjusted using the Scratch Disc. Adjustments can be made in real-time while playing the live loop. AUTO BPM COUNTER, BPM LOCK, MANUAL TAP, and MANUAL BPM INPUT In addition to the Auto BPM counter and Manual Tap function, the DN-S1000 is also equipped with a Lock function for temporarily locking the Auto BPM counter. A Manual BPM Input function is available too for inputting the known BPM value directly by a Rotary knob, so the BPM setting can be made easily.

Features and Functions

With the implementation of a powerful DSP and large memory capacity allows for many new controlling features such as: 1. SCRATCH The jog dial construction consists of clear scratch disc, felt slipmat and slip sheet to ensure the same feeling and performance as found in an analog turntable. 2. MP3 PLAY BACK It is possible to play MP3 files created in the specified format found on page 16. Files can be searched for easily either manually, or by scanning or using a number of file search functions (File search, File/Folder search, Artist name search, Title name search, File name search). 3. NEXT TRACK RESERVE The next track can be selected while continuing to play the current track for a seamless transition. 4. CROSS FADE In conjunction with the Next Track feature, the DN-S1000 can perform a smooth internal cross fade when transitioning to the new track.

2 CONNECTIONS/INSTALLATION

(1) CONNECTIONS

1. Turn off the POWER switch. 2. Connect the RCA pin cords between the DN-S1000 outputs and inputs of your mixer. 3. If your mixer has Fader Start function such as our DENON DN-X100 or DN-X300, connect FADER 1, 2 jacks to the mixer using 3.5 mm stereo mini cord.

DN-X100 DN-S1000

DN-X100

ECHO /LOOP FLANGER

FILTER

DISC MODE

ON : : BEND

LINE OUT FADER PGM 1

GEN-6335-1

LINE OUT

MADE IN JAPAN FABRIQUE AU JAPON

DN-X300

(2) INSTALLATION
Please set up DN-S1000 horizontally.

MAX 20 Front

3 PART NAMES AND FUNCTIONS
(1) Front panel (2) Rear panel

(3) Top panel

CAUTION: Note that there are many buttons working two different function selected by short time pushing or long pushing (1 second or more). The mark indicates short time push function and mark indicates long time push function.
!4 NEXT TR./B TRIM button

q Disc loading slot

Load the disc slowly, and release it once the DN-S1000 starts grabbing the disc in. NOTE: Please clean the dirt of the label side of a disc and start loading of the disc. The dirt causes a slip of a disc loader roller.

w POWER button (ON OFF)

Push this button to turn power on and off. CAUTION: Do not turn off the power while a disc is loading or being ejected. Otherwise loading mechanism may be damaged.
When the button is pressed during playback, the NEXT TRACK MODE is selected. If the button is pressed again, the *B TRIM MODE is selected. *Only when a seamless LOOP is set. In the standby and pause modes, only the B TRIM MODE can be selected.

!5 TITLE button

y PLAY/PAUSE button (13)

e Analog output jacks

(LINE OUT)
This is unbalanced RCA output jacks. Audio signals outputs.
This button will start or pause playback. Push once to start playback, once again to pause playback, and once more to resume playback.
CAUTIONS: Do not load discs when the power is turned off. Do not try to forcibly remove a disc once the DN-S1000 has started to grab the disc. Do not load more than once disc at a time or insert anything other than discs. Otherwise loading mechanism may be damaged.

PARAMETERS PUSH

DISC MODE ON : SCRATCH OFF : SEARCH/ BEND
TRACK SEARCH MP3 SEARCH MODE
Turn the o Scratch Disc to change Cue point. You can hear the short sound of the current Cue point. When o Scratch Disc is turned in the pause, Cue or frame repeat mode, it works as the manual search function. After you found your preferred Cue point, push the i CUE button then a new Cue point is set.

Pitch Bend

With PITCH BEND function you can change pitch temporary. DN-S1000 has two ways for this function PITCH BEND buttons and Scratch Disc. [PITCH BEND +/ buttons]

Play and Cue

When the i CUE button is pushed during playback, the track stops and returns to the original position of which playback started from, the (Cue point). This function is also called Back-Cue. With the Back-Cue function, you can start from exactly same position. The i CUE button illuminates solid red when DNS1000 is ready to start playback. You can set and change Cue point as follows. When you started playback. Track select finished. manual search.

CUE/STUTTER

Adjusting the pitch
With Pitch slider you can adjust the playback speed (Pitch). If you would not prefer to change key of sound, use the Key Adjust function.
Push the @6 PITCH BEND or @7 + button for PITCH BEND momentary change of pitch. While holding these buttons down, the pitch continues to change up to the limitation. After releasing the PITCH BEND buttons, playback pitch returns to slider setting. [Scratch Disc] When the disc mode is set to SEARCH/BEND with the !8 DISC MODE button, the playback speed can be changed by turning o Scratch Disc during playback.

Select the track

Turn the @3 TRACK knob. By pushing @3 TRACK knob down while turning, the tracks will increment 10 at a time. !Move Push the @9 PITCH/KEY button to PITCH LED lights up.

PITCH/KEY

PITCH KEY (key adjust) OFF Pitch decreases Move the @8 Pitch slider to adjust the pitch. The current pitch setting is displayed on the display. Pitch increases

the Cue point

Power on play
When POWER ON PLAY is set to ON at 4 PRESET (10), playback starts from the first track on the disc when the power is turned on.

If you would like to start playback other from the beginning of the track, you need to move Cue Point using fast Search and manual search function. You can move to the approximate playback start position by @4 or @5 FAST SEARCH buttons. QUICK JUMP [QUICK JUMP] If the FAST SEARCH button FAST SEARCH is tapped shortly, the playback position jumps about 10 seconds. The jump time can be selected in the preset mode from 10,20,30 or 60 sec. [FAST SEARCH] When the FAST SEARCH button is pressed and held in, the disc is fast-searched.
DN-S1000 has five pitch ranges, 4%, 10%, 16%, 24% and 100%. When the @9 RANGE button is pushed for more than 1 sec, the pitch range can be selected with the @3 PARAMETERS knob.

6 NEXT TRACK

Its now possible to select the beginning of the next track to be played while continuing playback of the current track without interrupting playback. *Crossfade can also be used for a smooth transition. Enter Next Track mode NEXT TR. q When the NEXT TR./B TRIM /B TRIM button is pushed during playback, the NEXT TRACK function is turned on. When this mode is set, CUE button blink. When the button is pushed again, the NEXT TRACK mode is turned off. However, when seamless loop point B is set, the point B trim mode is selected. In this case press the button again to turn the trim mode off.
The time display indicates the remaining playback time for data in the memory after CUE is pressed. NOTE: The amount of time for which playback of the currently continuing track can be continued is a maximum of 10 seconds from the time searching for the next track starts.
The currently playing track can be faded out when starting to play a different track. The fade out time can be selected at 4 PRESET (2) Next Track. If the PLAY/PAUSE button is not pushed after standing by at the next track, (when in the CONT.) playback mode, playback of the next track starts once all of the currently playing playback data has been played. The same goes for SINGLE playback mode.
FAST SEARCH TRACK SEARCH MP3 SEARCH MODE
Select the track w Turn the PARAMETERS knob and select for the 2-1 next track to be played.
Next Track playback start t When the PLAY/PAUSE button is pushed, the 4-1 current playback is stopped and playback of the next track starts.

7 SCRATCH

Set the Scratch mode

CONT. /SINGLE

Select the MEMO e The CUE point of MEMO can be selected as NEXT TRACK. When the NEXT TRACK with which MEMO is memorized is selected, the MEMO indicator lights up. If the MEMO button is pushed at this 2-2 time, the CUE point is memorized as the NEXT TRACK & point to be selected. The MEMO will be canceled if another track is selected by PARAMETERS knob or the MEMO button is pushed again. Track search start r When the CUE button is pushed after selecting the track, current playback continues as the next track is searched for and the standby mode is set. When the standby mode is set, the CUE button lights up and the PLAY/PAUSE button flashes.

w When A1 or A2 button is pushed, Hot Start playback starts from the corresponding A point.
Setting the B point for Seamless Loop e When the B button is pushed after setting the A point or after starting Hot B start playback, the B point is 3-1 set and Seamless Loop playback starts from the A point. The B button works with respect to the A point operated before the B button was pushed.
EXIT: While the Seamless Loop playback, push the EXIT/RELOOP button to exit from loop. DN-S1000 continues playback after the B point. RELOOP: When the EXIT/RELOOP button is pushed after exit the loop, Seamless Loop playback resumes from the A point.

9 B TRIM

The Seamless Loop B points can be fine-adjusted using the Scratch Disc. Trim the points during loop playback as a rehearsal.
10 AUTO BPM COUNTER / EFFECTOR

AUTO BPM COUNTER r

PRESET POWER TITLE ON OFF TIME

q, w, e, t

AUTO FILTER DISC MODE ON : : BEND
AUTO BPM COUNTER Beats per minute (BPM) of a track is measured automatically and displayed during playback or in Cue standby mode. Measured BPM values are synchronized with the effector parameters such as:(ECHO/LOOP and FLANGER time) When Auto BPM COUNTER is off, pushing the TAP button for 1 second, reactivates the AUTO BPM COUNTER to turn back on. If you change or select a new track, the old BPM is cleared and the Auto BPM Counter starts to detect the new track automatically. NOTE: AUTO BPM COUNTER might not me able to be measured correctly according to the type of music. *If this happens, please use the TAP feature. BPM LOCK The data measured by the auto BPM counter is locked.

B Trim

q When the NEXT TR./B TRIM button is pressed during seamless loop playback, the B TRIM mode is turned on. When the NEXT TR./B TRIM is pressed during playback, the NEXT TRACK mode is set. If the button is pressed again without performing the NEXT TRACK mode operation, the B TRIM mode NEXT TR. /B TRIM is selected. Trim B point e Turn Scratch Disc slowly to move the B point 1 frame at a time. Range for trimming B point is limited as follows. B point for Loop: Between 5 frames after A point and disc end. *MP3 Between 5 frames after A point and file end.
MANUAL INPUT The known BPM can be dialed in directly by the numerical value. e The BPM manual input mode is available when the TAP button is pushed for more than 2 sec. Manual In is displayed is the screen. r You can input BPM value directly with the PARAMETERS knob.
q Push the TAP button once while auto BPM counter is operating.

Select B point

The parameter mode is turned off while the echo loop is reproducing when the back cue or NEXT TRACK is selected at the parameter selection mode. When the new track is selected and playback is started, echo loop playback stops by fade out. An echo loop playback and a normal playback can be smoothly replaced. The disc can also be ejected during Echo Loop and replaced with a new disc without interrupting the sound. Once a new track is selected and PLAY is pushed, the echo loop starts to automatically fade out.
y In the parameter selection mode, the FLANGER and PARAMETERS LED flashes and the flanger parameters can be selected with PARAMETERS knob 2-2 and scratch disc.
Filter types:PARAMETERS knob. *6 The Filter types is displayed in the character displayed.
Parameter selection mode OFF
FLANGER Gain:Scratch disc. *3 The FLANGER gain is displayed in the playback position indicators. FLANGER Time:PARAMETERS knob. *4 The FLANGER time is displayed in the charactor display. Parameter selection mode OFF
!1 When the PARAMETER ON : SCRATCH OFF : SEARCH/ knob or the DISC MODE BEND 3-3 button is pushed, parameter selection mode is canceled.
FILTER OFF !2 When the FILTER button is pressed, the filter parameter 3-4 selection mode is set. If the FILTER FILTER button is pressed again, the filter function is turned off.

Set the parameters

PUSH w In the parameter selection mode, the ECHO/LOOP and PARAMETERS LED flashes and the echo/loop parameters can be selected with PARAMETERS knob TRACK SEARCH MP3 SEARCH MODE and scratch disc. 1-2 Echo Feedback number:Scratch disc. *1 The Echo Feedback number is displayed in the playback position indicators. PARAMETERS
u When the PARAMETER ON : SCRATCH OFF : SEARCH/ knob or the DISC MODE BEND button is pushed, parameter selection mode is canceled. FLANGER OFF
Echo Time:PARAMETERS knob. *2 The Echo time is displayed in the character display.
e When the PARAMETER ON : SCRATCH OFF : SEARCH/ knob or the DISC MODE BEND button is pushed, parameter selection mode is temporaily canceled.
i When the FLANGER FLANGER button is pressed, the flanger parameter selection 2-4 mode is set. If the FLANGER button is pressed again, the flanger function is turned off.

11 MP3 PLAYBACK

The DN-S1000 can playback MP3 files via CD-R/RW media made according to the following conditions. * MP3 discs made by formats other than below settings cannot be played back on our system. * In most cases, you can find the below settings within the properties of your burners PC software. Please refer to your manual or contact your software vendor for assistance regarding these settings. NOTES: Depending on the type of MP3 encoding or writing software, with some files noise may be generated or it may not be possible to play the file. Recordings you make are for your personal use and should be used in ways NOT infringing upon the copyright holder as per copyright laws.

Select the file

Select the file search modes For MP3 discs, the file search modes described below can be selected by pushing the @3 track select knob and holding it in for over 1 second. The file search mode is selected by turning the @3 PARAMETERS knob and set by pushing the knob. File search (File) When the @3 track select knob is turned, file searching is performed in the order of the file numbers. When the @3 track select knob is pushed in and turned, file searching is performed 10 files at a time. File/Folder search (FileFolder) When the @3 track select knob is turned, file searching is performed in the order of the file numbers. When the track select knob is pushed in and turned, folder searching is performed in the order of the folder numbers. Artist name search (ArtistName) Title name search (Title_Name) If the artist name or title name is recorded in the file name as described below, it is possible to search in alphabetical order of artist or title names. When recorded in order of artist name and title name (Artist - title, (Artist)(Title), [Artist][Title]) and with -, () or [] between artist names and title names, it is possible to search artist names and title names in alphabetical order. NOTES: These name search functions cannot be selected unless the file names are recorded in the specified format. Title and artist name use the data of a file name. It is not data of ID-3 tag. When the artist name search or title name search mode is selected and the @3 track select knob is pressed in while turned, name search is performed in the alphabetical order of the names. If the @3 track select knob is turned after searching in alphabetical order is finished, file searching is performed in the order of the file numbers from the name with the selected letter. If the i CUE button is pushed after file searching, the searched file is searchedfor and the standby mode is set.

MP3 FORMAT

Applicable file extensions ISO9660 Joliet Romeo CD-ROM sector format Folder/directory hierarchical level Max. number of Folders Max. number of files MPEG-1 ID-3 Tag MP3 Format Encording.mp3.MP3.mP3.Mp3 Level 1(max. 8/8.3 character style) Level 2 (max. 31/30 character style) max. 64/64 character style max. 64/64 character style mode-1 only max. 8 levels down (* note #1) No limit (* note #2) max. 255 files (* note #3) Audio Layer-3 32-320kbps, f/s 44.1kHz V1.0,V1.1,V2.2,V2.3,V2.4 C.B.R , V.B.R
File name search (File_Name) Files can be searched for by file name in alphabetical order. When the file name search function is selected and the @3 track select knob is pushed in while turned, the file names are search in alphabetical order. If the @3 track select knob is turned after searching in alphabetical order is finished, file searching is performed in the order of the file numbers from the file name with the selected letter. If the i CUE button is pushed after selecting the file, the selected file is searched for and the standby mode is set.

Disc Format

NOTE: When the file name dose not correspond to the format of 4, file name search is selected.
Manual search & Fast search
For only C.B.R files, manual searching and fast searching can be performed. NOTES: With manual searching and fast searching, it is only possible to search within the selected file. Manual searching in the reverse direction is possible up to the point 10 seconds before the point at which searching starts. The searching speed may vary according to the files compression rate, etc.
NOTE :.m3u Play List are not supported. Disc at Once and Track at Once If the 1st session is CDDA ,you can playback only CDDA track. If the 1st session is MP3,you can playback only MP3 file.

Disc Writing Method

Multi Session

Scratch

Scratch playback is possible in the same way as with normal CDs. NOTE:Scratching (back spinning) in the reverse direction is possible up to the point 10 seconds before the point at which reverse playback was started.
NOTE : Packet Write is not supported. note #1 Cannot playback files in a folder located further from the specified Folder/directory hierarchical level. note #2 The number of total folders is not limited, while the number of total files is limited. note #3 If the number of files exceeds 255, the unit can play first 255 files, and no further files are recognized.

Display

The elapsed file playing time and the remaining file playing time (for C.B.R files only) can be selected. The file name display, folder name display and ID-3 tag can (title/artist name/album name) be displayed. Each time the !5 TITLE button is pushed, the file name display, folder name display, title display, artist name display or album name display are selected. NOTE: Title and artist name use the data of ID-3 tag. It is not data of a file name.

Play, Pause and Cue

Like with a normal CD, it is possible to play, pause and back-cue. Pitch range, 4%, 10%, 16% NOTE: When you back cue V.B.R.encoded files, the start position returns to the head of file 00:00:00 rather than where music is detected.

Start the BRAKE

DRAG-S mode off: i When the DRAG-S button is pressed, the DRAG-S time selection mode is set. 3-4 If the DRAG-S button is pressed again during this time, the DRAG-S function is turned off.
1-3 #1 The BRAKE is activated when the 13 button is pushed during playback.
STOP the BRAKE #2 The BRAKE mode can be cancelled by pressing the Play button again during this effect.
13 MEMO (Custom Setting Memory)
CD setting information can be stored in the non-volatile memory. The stored information can be called out of the memory at later time, making it easy to prepare for your mixing. *MP3 MEMO point saving is not available. 1. About MEMO Up to 1000 memo points can be stored to internal memory for later recall. The number of tracks on a particular CD only limits the amount of memo points available per that disc. Example: If your CD has 22 tracks, you can only save up to 22 memos. (1 memo group per track.) CAUTION: 1000 is the maximum possible number of tracks that can be stored to memory. However, to simplify the MEMO operations, the memory system manages each 200 MEMO data package as a minimum unit (the total 1000 memory capacity divided into 5 package units). When you want to clear just one MEMO data in the 1 MEMO CLEAR mode, the unit will erase the memo information but not the internal memo allocation number. Accordingly, depending on conditions, the number of tracks that can be stored in the memory may be fewer than 1000. Once you reached 1000 stored points, you will see a message that says MEMO FULL!. At this time you will need to delete old data to make room for new memo points. Therefore the oldest 200 memo points will be deleted and become clear. The MEMO indicator on the display lights up when a track for which data is stored in the memory is selected. 2. MEMO ITEMS The following items are max to be stored under 1 memory bank: q Cue point w A1 and B1 points, A2 and B2 points e Playing pitch, pitch on/off, Key Adjust on/off setting 3. MEMO MODE SELECT q Push the !7 MEMO button in Cue mode to enter MEMO mode. w Turn the @3 PARAMETERS knob to select the various MEMO modes from as follows. Memo Set, Memo Call, Memo Clr Depending on conditions, some modes cannot be selected. e Push the !7 MEMO button again to exit MEMO mode. (1) Storing data in the memory [Memo Set] After make the settings to be stored in the memory, then push i CUE button. When MEMO indicator on the display is off in Cue mode, push !7 MEMO button to enable Memo set function. If MEMO indicator lights up, it is necessary to clear existing Memo before store new Memo. At last push @3 PARAMETERS knob to fix. You can see Complete! message and MEMO indicator lights up. MEMO FULL If the memory is full and no more data can be stored, Memo Full! and Del 200? message appears. In this case, you need to clear memory of First 200s Memo (number 1 to 200) at a time to make space for new memos. To make space, push @3 PARAMETERS knob while Del 200? message is displayed. Delete OK? message appears then push @3 PARAMETERS knob again to execute clearing. After the first 200s Memo (number 0 to 199) are cleared, number after 201 Memo are renumbered as new 1, 2, 3(now you have new 200 empty space.). (2) MEMO CALL [Memo Call] When the CD includes tracks that DN-S1000 has Memo is inserted, MEMO indicator flashes 5 seconds. To call out the Memo data, select the track that you made MEMO. Then MEMO indicator lights up. Push the !7 MEMO button to enable Memo call function. When the @3 PARAMETERS knob is pushed in the Memo call mode, all the data stored in the memory is loaded. DN-S1000 goes to standby mode at the called Cue point. When the playing pitch is loaded from the Memo with PITCH LED flashes, playing Pitch is locked until Pitch Slider comes same Pitch. While playing Pitch is locked, PITCH LED keeps flashing.

DJ MIXER

DN-X100

OPERATING INSTRUCTIONS INSTRUCCIONES DE OPERACION

FOR ENGLISH READERS

5 ~ PAGE

PARA LECTORES DE ESPAOL

PAGINA 11 ~ PAGINA 16

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

SAFETY INSTRUCTIONS

1. 2. 3. Read Instructions All the safety and operating instructions should be read before the product is operated. Retain Instructions The safety and operating instructions should be retained for future reference. Heed Warnings All warnings on the product and in the operating instructions should be adhered to. Follow Instructions All operating and use instructions should be followed. Cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards. Water and Moisture Do not use this product near water for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. Accessories Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturers instructions, and should use a mounting accessory recommended by the manufacturer. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 13. Power-Cord Protection Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. 15. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure A. 16. Lightning For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. 17. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 18. Overloading Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 19. Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 20. Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 21. Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the power-supply cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation, e) If the product has been dropped or damaged in any way, and f) When the product exhibits a distinct change in performance this indicates a need for service. 22. Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 23. Safety Check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 24. Wall or Ceiling Mounting The product should be mounted to a wall or ceiling only as recommended by the manufacturer. 25. Heat The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PESONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

4. 5. 6. 7.

WARNING: TO
PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

1. Handle the power supply cord carefully
Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. When removing from wall outlet, be sure to remove by holding the plug attachment and not by pulling the cord.

LABELS:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
2. Do not open the top cover
In order to prevent electric shock, do not open the top cover. If problems occur, contact your DENON dealer.

ATTENTION

POUR VITER LES CHOCS LECTRIQUES, INTERODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU AU FOND.
10. Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturers instructions have been adhered to. 11. Power Sources This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. 12. Grounding or Polarization This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

3. Do not place anything inside
Do not place metal objects or spill liquid inside the DJ mixer. Electric shock or malfunction may result. Please, record and retain the Model name and serial number of your set shown on the rating label. Model No. DN-X100 Serial No.
FIGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE

ANTENNA LEAD IN WIRE

GROUND CLAMP
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRIC SERVICE EQUIPMENT
GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)
NEC - NATIONAL ELECTRICAL CODE

ENGLISH

ESPAOL
TOP PANEL DIAGRAM / DIAGRAMA DEL PANEL SUPERIOR
REAR PANEL DIAGRAM / DIAGRAMA DEL PANEL POSTERIOR

ty u u y t

w q !7 !6 !3 !5
!0 !1 !2 !3 @7 @6 @5 @4 @3 @2 @5 @4 @3 @2 @1
FRONT PANEL DIAGRAM / DIAGRAMA DEL PANEL FRONTAL
NOTE ON USE / HINWEISE ZUM GEBRAUCH / OBSERVATIONS RELATIVES A LUTILISATION / NOTE SULLUSO NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA
DECLARATION OF CONFORMITY We declare under our sole responsibility that this product, to which this declaration relates, is in conformity with the following standards: EN60065, EN55013, EN55020, EN61000-3-2 and EN61000-3-3. Following the provisions of 73/23/EEC, 89/336/EEC and 93/68/EEC Directive. BEREINSTIMMUNGSERKLRUNG Wir erklren unter unserer Verantwortung, da dieses Produkt, auf das sich diese Erklrung bezieht, den folgenden Standards entspricht: EN60065, EN55013, EN55020, EN61000-3-2 und EN61000-3-3. Entspricht den Verordnungen der Direktive 73/23/EEC, 89/336/EEC und 93/68/EEC. DECLARATION DE CONFORMITE Nous dclarons sous notre seule responsabilit que lappareil, auquel se rfre cette dclaration, est conforme aux standards suivants: EN60065, EN55013, EN55020, EN61000-3-2 et EN61000-3-3. Daprs les dispositions de la Directive 73/23/EEC, 89/336/EEC et 93/68/EEC. DICHIARAZIONE DI CONFORMIT Dichiariamo con piena responsabilit che questo prodotto, al quale la nostra dichiarazione si riferisce, conforme alle seguenti normative: EN60065, EN55013, EN55020, EN61000-3-2 e EN61000-3-3. In conformit con le condizioni delle direttive 73/23/EEC, 89/336/EEC e 93/68/EEC. QUESTO PRODOTTO E CONFORME AL D.M. 28/08/95 N. 548
DECLARACIN DE CONFORMIDAD Declaramos bajo nuestra exclusiva responsabilidad que este producto al que hace referencia esta declaracin, est conforme con los siguientes estndares: EN60065, EN55013, EN55020, EN61000-3-2 y EN61000-3-3. Siguiendo las provisiones de las Directivas 73/23/EEC, 89/336/EEC y 93/68/EEC. EENVORMIGHEIDSVERKLARING Wij verklaren uitsluitend op onze verantwoordelijkheid dat dit produkt, waarop deze verklaring betrekking heeft, in overeenstemming is met de volgende normen: EN60065, EN55013, EN55020, EN61000-3-2 en EN61000-3-3. Volgens de bepalingen van de Richtlijnen 73/23/EEC, 89/336/EEC en 93/68/EEC. VERENSSTMMELSESINTYG Hrmed intygas helt p eget ansvar att denna produkt, vilken detta intyg avser, uppfyller fljande standarder: EN60065, EN55013, EN55020, EN61000-3-2 och EN61000-3-3. Enligt stadgarna i direktiv 73/23/EEC, 89/336/EEC och 93/68/EEC.

Do not let insecticides, benzene, and thinner come in contact with the set. Lassen Sie das Gert nicht mit Insektiziden, Benzin oder Verdnnungsmitteln in Berhrung kommen. Ne pas mettre en contact des insecticides, du benzne et un diluant avec lappareil. Assicuratevvi che lunit non venga in contatto con insetticidi, benzolo o solventi. No permita el contacto de insecticidas, gasolina y diluyentes con el equipo. Laat geen insektenverdelgende middelen, benzine of verfverdunner met dit apparaat in kontakt komen. Se till att inte insektsmedel p spraybruk, bensen och thinner kommer i kontakt med apparatens hlje.
FCC INFORMATION (For US customers)

1. PRODUCT

Never disassemble or modify the set in any way. Versuchen Sie niemals das Gert auseinander zu nehmen oder auf jegliche Art zu verndern. Ne jamais dmonter ou modifier lappareil dune manire ou dune autre. Non smontate mai, n modificate lunit in nessun modo. Nunca desarme o modifique el equipo de ninguna manera. Nooit dit apparaat demonteren of op andere wijze modifiren. Ta inte isr apparaten och frsk inte bygga om den.

3. NOTE

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the product into an outlet on a circuit different from that to which the receiver is connected. Consult the local retailer authorized to distribute this type of product or an experienced radio/TV technician for help.
(For sets with ventilation holes) Do not obstruct the ventilation holes. Die Belftungsffnungen drfen nicht verdeckt werden. Ne pas obstruer les trous daration. Non coprite i fori di ventilazione. No obstruya los orificios de ventilacin. De ventilatieopeningen mogen niet worden beblokkeerd. Tpp inte till ventilationsppningarna.
This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation.
2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT

This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modification not expressly approved by DENON may void your authority, granted by the FCC, to use the product.
CAUTION The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. No naked flame sources, such as lighted candles, should be placed on the apparatus.
Please be care the environmental aspects of battery disposal. The apparatus shall not be exposed to dripping or splashing for use. No objects filled with liquids, such as vases, shall be placed on the apparatus.

2 INTRODUCTION

Thank you very much for purchasing the DENON DN-X100 DJ MIXER. DENON proudly presents this advanced DJ MIXER to audiophiles and music lovers as a further proof of DENONs non-compromising pursuit of the ultimate in sound quality. The high quality performance and easy operation are certain to provide you with many hours of outstanding listening pleasure.
2 PART NAMES AND FUNCTIONS

(1) Top panel

(Refer to page 3.)
q MIC ON/OFF/TALKOVER switch
When TALKOVER is selected , all signals except the microphone level are decreased by 20 dB. When at the ON or OFF position all signals remain at their standard levels.

u GAIN

Adjusts the gain of each input channel.

TABLE OF CONTENTS

i MASTER LEVEL control
Adjust the level of the MASTER output.
MAIN FEATURES..5 PART NAMES AND FUNCTIONS.5, 6 CONNECTIONS..7
SPECIFICATIONS..8 FADER START..9 ROTATING INPUT SELECT SWITCHES.10

w MIC EQ controls

Contour the frequency response of the Mic input 12 dB to +12 dB. At the center position, sound is flat.

o MASTER BALANCE control

Adjust the L/R balance of the MASTER outputs.

!0 Headphone PAN control

This function allows you to monitor the CUE level as well as the MASTER output in your headphones. A CUE Level may only be monitored of the CUE signal is selected. Serves two purposesIn the STEREO mode it changes the relative levels of the CUE and MASTER mixed together in both ear cups. In the SPLIT CUE mode it changes the balance between the monaural CUE sound in the left and monaural MASTER sound in the right.

2 ACCESSORIES

Please check to make sure the following items are included with the main unit in the carton:

e MIC LEVEL control

q Operating instructions..1 w AC adaptor...1 (AA-26 : for AC 120 V, AA-27 : for AC 230 V) Adjust the level of Mic signal.

r Source EQ controls

Contour the frequency response of the selected inputs. HI and MID: Adjusts the high-tone and mid-tone sound 40 dB to +10 dB. LOW: Adjusts the high-tone and mid-tone sound 40 dB to +6 dB. NOTE: Clipping may occur if adjustments are set to harsh.

1 MAIN FEATURES

1. 2-Channel DJ Mixer 4 LINE, 2 PHONO, 1 Microphone systems and 2 MASTER outputs are provided independently. 2. VCA controlled Channel Fader and Crossfader 3. Channel Fader and Crossfader contour adjustable This feature allows adjusting the shape of the Crossfader and Channel fader response from a gentle curve for smooth to the steep pitch required for top performance cut and scratch effects. 4. Channel Fader and Crossfader Reverse 5. Channel Fader and Crossfader Start The CD player can be started or stopped simply by increasing or decreasing the level of the Ch.fader or by using the Crossfader left to right or right to left. (This function can only be used when the DENON CD players DN-S3000, DN-S5000, DNS1000 or etc. is connected to the DN-X100.) 6. Channel Reverse function This function allows the left hand channel fader or right hand channel fader to control PGM1 or PGM2. 7. 3-Band Equalizer/Gain LOW, MID, HI and GAIN controls are available on every input channel. 8. 4 direction placement for input selector 9. Microphone Talkover function

!1 PHONES LEVEL control

Adjusts the headphone output level.

!2 SPLIT CUE button

In the STEREO mode, the stereo sound of MASTER and CUE are fed to both ear cups. In the SPLIT CUE mode, the headphone circuit provides monaural CUE sound to the left and monaural MASTER sound to the right. When the Level Meter mode select switch is set to MASTERIn the STEREO mode, the meter indicates the stereo level in the L/R Master output. In the SPLIT CUE mode, the monaural CUE sound level is displayed on the left and the monaural MASTER sound level is displayed on the right. In the SPRIT CUE mode, the LED is lit.

t Input select switch

Switches between the PHONO/LINE and LINE inputs. When the lever of switch is vertical position, the LINE2 or LINE4 input is selected. When the lever of switch is slope, the PHONO1/LINE1 or PHONO2/lINE3 input is selected. You can perform 4 direction placement. See page 10.

y CUE buttons

These buttons are used to activates a channels CUE mode, the LED above the cue button will glow when cue mode is activated. Cue mode will send a channels incoming signal to the headphones.

!3 Channel Fader

Controls the channel output level.

!4 Crossfader

Fades the overall mixer output between channels 1 and 2.

(2) Rear panel

(3) Front panel
!8 Power operation switch (POWER)
Selects power ON or OFF. NOTE: Whenever the power switch is in the OFF state, the AC adaptor is still connected on AC line voltage. Please be sure to unplug the cord when you dont use for along time.
@4 PHONO1, 2 / LINE1, 3 input jacks
These stereo pair of unbalanced RCA jacks are inputs for a PHONO (RIAA) stage for magnetic (MM) cartridges or a LINE stage suitable for any device, such as a CD player.
@8 CH 1/2 FADER START switches
Use this to switch the Channel Fader Start function ON and OFF.

!5 Level Meter

The dual LED's indicators are used to detail either the master output level, a combination of the master output level and the CUE signal level, or the PGM1/2 monaural level.
@9 CROSSFADER START A/B switches
Use this to switch the Crossader Start function ON and OFF.

@5 LINE2, 4 input jacks

These stereo pair of unbalanced RCA jacks are inputs for any line level device.

!6 CH REVERSE button

This switch allows the left hand fader or right hand fader to control PGM1 or PGM2. When the CH REVERSE mode is ON, the CH1 fader will be able to control PGM 2 sound and the CH2 fader will be able to control PGM 1 sound. NOTE: Please dont confuse with the CH 1/2 FADER REVERSE switch (#2).
!9 Balanced MASTER OUT jacks (BAL.)
These 1/4 TRS jacks provide a balanced line level output. Connect these jacks to the balanced analog input jacks on an amplifier or console. Pin layout: Tip=Hot Ring=Cold Sleeve=GND

#0 HEADPHONE output jack

Accept 1/4 stereo headphone plugs.
@6 Unbalanced MASTER OUT jacks
This stereo pair of RCA jacks provides an unbalanced line level output. Connect these jacks to the unbalanced analog input jacks on an amplifier or console.
#1 CH 1/2 FADER CONTOUR adjustment
Adjusts the curve of the CH1/2 faders between fast, normal , or slow fade.
@0 MIC BALANCED INPUT jack
Accepts an balanced microphone with 1/4 TRS mono jacks. Pin layout: Tip=Hot Ring=Cold Sleeve=GND

@7 AC IN

Input connection for the included AC adaptor. NOTE: Use specified attached AC adaptor only.
#2 CH 1/2 FADER REVERSE switch

Reverses the direction of each respective input CH1/2 fader.
@1 PGM1, 2 FADER output jacks
Connect these jacks to the FADER input jacks of DN-S3000, DN-S5000, DN-S1000 and etc. using the 3.5mm stereo mini cord.
#3 CROSSFADER CONTOUR adjustment
Adjusts the shape of the crossfader curve from a fast cut for scratching or to a slow fade for mixing.
!7 Level meter mode select switch
The position of this switch will determine the Level Meter mode. In the MASTER position, the meter will detail the out level of the left and right channels. In the PGM 1/2 position, the left side of the meter will indicate monaural level of the PGM 1 and the right side of the meter will indicate monaural level of the PGM 2.
@2 Phono ground screw (GND)
This screws provide a place to connect the ground wire from a turntable. This terminal is exclusively for a turntable ground and not a safety earth ground.
#4 CROSSFADER REVERSE switch
Reverses the direction of the crossfader.
@3 PHONO1, 2 / LINE1, 3 switches

(LN / PH)

These switches change the input from PHONO to a LINE level input. These switches set a LINE level input when turntable is not connected. NOTE: Always be sure main power is shut off before change the position of the Line Level Selector Switch.

3 CONNECTIONS

Refer to the connection diagram below. 1. Make certain AC power is off while making connections. 2. Quality cables make a big difference in fidelity and punch. Use high-quality, audio cables. 3. Do not use excessively long cables. Be sure plugs and jacks are securely fastened. Loose connections cause hum, noise, or intermittents that could damage your speakers. 4. Connect all stereo input sources. Then connect any effects into the stereo effect, if used. Connect your microphone(s) and monitor headphones. Make sure all faders are at zero and the unit is off. Take care to connect only one cable at a time. Pay attention to L and R position of jacks, on both the DN-X100 and outboard gear. 5. Connect the stereo outputs to the power amplifier(s) and/or tape deck(s) and/or MD recorder(s) and/or CD recorder(s). Plug the DN-X100 into AC power outlet.
NOTE: Always switch on your audio input sources such as CD players first, then your mixer, and finally any amplifiers. When turning off, always reverse this operation by turning off amplifiers, then your mixer, and then input units.

CD player

POWER TITLE ON OFF

A PARAMETERS PUSH

EXIT/ RELOOP MEMO

EXIT/ RELOOP

PRESET TIME

NEXT TR. /B TRIM

PRESET

QUICK JUMP

CONT. /SINGLE TRACK SEARCH MP3 SEARCH MODE

CONT. /SINGLE FAST SEARCH TRACK SEARCH MP3 SEARCH MODE

FAST SEARCH

ECHO /LOOP FLANGER
FILTER FILTER DISC MODE DISC MODE ON : SCRATCH OFF : SEARCH/ BEND ON : SCRATCH OFF : SEARCH/ BEND

Turntable 2

ANTI-S

Turntable 1

TING KA

RVS RVS

KEY ADJUST KEY ADJUST PITCH

-12 -12

SLOW BRAKE SLOW BRAKE

Quartz Quartz

CUE/STUTTER
CUE/STUTTER PITCH/KEY PITCH/KEY

OFF ON

+12 +12 START /STOP

START /STOP 33

DP-DJ151 Digital

PLAY/PAUSE

DISC EJECT

RANGE PITCH BEND

1/4 TRS jack

R L R L L R R L L R

1/4 TRS mono jack
Main balanced power amplifier
AA-26: for AC 120V AA-27: for AC 230V AA-26 or AA-27 To power outlet AC ADAPTOR
Main unbalanced power amplifier
Note: Use specified attached AC adaptor only.

3.5 mm stereo mini cord

DRAG-S

Balanced microphone

4 SPECIFICATIONS
Phono Inputs: Input Impedance Level Line Inputs: Input Impedance Level EQ Control (Line): Control Range 2 Stereo 50 k/kohms 50 dBV (3 mV) 2 Stereo 20 k/kohms 14 dBV (200 mV) Unbalanced RCA jacks

Unbalanced RCA jacks

3 Bands HI: 30 dB to +10 dB (at 16 kHz), 38 dB to +10 dB (at 20 kHz) MID: 38 dB to +10 dB (at 01 kHz) LOW: 38 dB to +06 dB (at 060 Hz) 1 Mono 2 k/kohms 54 dBV (2 mV) 20 Hz to 20 kHz (3 dB) 66dB Active Balanced 1/4 TRS jack
Mic Inputs: Input Impedance Level Frequency Response S/N EQ Control (Mic): Control Range Master Output: Balanced Output Impedance Level Frequency Response THD+N S/N Cross Talk Unbalanced Output Impedance Level Frequency Response THD+N S/N Cross Talk Headphone Output: Output Impedance Level Power Source:
2 Bands HI: 12 to +12 dB (at 10 kHz) LOW: 12 to +12 dB (at 100 Hz) Stereo 150 /ohms +4 dBm (1.23 Vrms) 20 Hz to 20 kHz (2 dB) LINE : Below 0.05 % LINE : 85 dB Over 75 dB Stereo 1 k/kohms 0 dBV (1 Vrms)V 20 Hz to 20 kHz (2 dB) LINE : Below 0.05 % LINE : 85 dB Over 75 dB Stereo 33 /ohms 0 dBV (1 Vrms) AC 10 V 750 mA x 2 Active Balanced 1/4 TRS jack (600 /ohms load) PHONO : Below 0.07 % PHONO : 76 dB Unbalanced RCA jacks (10 k/ohms load) PHONO : Below 0.07 % PHONO : 76 dB

(32 /ohms load)

Power Supply, Consumptions: USA, Canada AC 120 V 10 %, 60 Hz (AC adaptor : AA-26) Europe, Asia, Oceania AC 230 V 10 %, 50 Hz (AC adaptor : AA-27) Unit Size 220 (W) x 226 (D) x 85.4 (H) mm Mass 2.8 kg AC adaptor : 0.5 kg

Specifications and design are subject to change without notice for purpose of improvement.

5 FADER START

If the separately sold DN-S5000, DN-S3000, DN-S1000 and etc. players are connected to FADER PGM1 or PGM2, they can started using the Channel fader or Crossfader, as long as the 3.5 mm stereo mini cords have been connected.

Channel Fader Start

Turn on the CH 1/2 FADER START switches @8.

Crossfader Start

Turn on the CROSSFADER START A, B switches @9.

DEL NO. DELE NO.

DN-S1000

MODEL NO.

MADE IN JAPAN FABRIQUE AU JAPO
Move the Channel fader !3 of CH-1 or CH-2 control all the way to the bottom.

LINE OUT

FADER LINE OUT FADER PGM1
Slide the Crossfader !4 all the way in direction opposite the source you want to start. (In the following example, startup is done with the CD player connected to PGM1.)

LINE2 FADER PGM2

Set the standby mode on CD player. Use the CH 1/2 FADER CONTOUR controls #1 to control the Channel fader startup curve.
Set the standby mode on CD player. Use the CROSS FADER CONTOUR control #3 to control the Crossfader startup curve.

CD player (DN-S1000)

FADER PGM1

FADER PGM2

MEMO CLR
When you want to start the player, move up the Channel fader !3 and the CD player will begin playing.

1-MIN. SKIP

CONT. /SINGLE

FLANGER

FILTER DISC MODE
When the Crossfader !4 is slid in the opposite direction, CD player play will begin.

(1)-2, 5

(1)-2, 5 (2)-2, 5 (2)-1 (1)-1
NOTE: When the CH 1/2 FADER REVERSE switch is set to ON, the corresponding fader's operating direction is reversed.

(2)-1 (1)-1

NOTES: When the CROSS FADER REVERSE switch is set to ON, the Crossfader's operating direction is reversed. Channel Fader Start and Crossfader Start for the same source will not operate simultaneously. You must select from either one. If both CH FADER START and CROSSFADER START A, B switches are ON, priority will be the Crossfader.
6 ROTATING INPUT SELECT SWITCHES
1. Disconnect the power. 2. Remove knobs from the Top Panel. 3. Remove the 6 screws attaching the Top Panel. 4. Remove the 2 screws attaching the Switch unit. 5. Rotate the Switch unit to the desired location. 6. Reinstall the 2 screws holding the Switch unit. 7. Reinstall the Top Panel and reattach knobs. (For RCA PINJACK)

About the Cables

RCA pin plug

Cable 1

Unbalanced
(For BALANCED MASTER OUT) Balanced
Sleeve=GND Ring=Cold Tip=Hot

Cable 2

Balanced (1/4 TS)
(For MIC) Balanced (1/4 TRS)

Cable 3

Balanced

1=GND 2=Hot

Switch unit

XLR3-11C

3=Cold