DECLARATION OF CONFORMITY
Manufacturers Name: Manufacturers Address: declares that the product: Product name: Product option: Bass Synth Wah all (requires Class II power adapter that conforms to the requirements of EN60065, EN60742, or equivalent.) DigiTech 8760 S. Sandy Parkway Sandy, Utah 84070, USA

Warning

For your protection, please read the following: Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Do not use this apparatus near water. 5. Clean only with dry cloth. 6. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 9. Unplug this apparatus during lightning storms or when unused for long periods of time. 10. No user serviceable parts inside. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 11.WARNING:To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 12. Refer to labels on the unit, including bottom cover, or other markings and pertinent information.
conforms to the following Product Specifications: Safety: EMC: Supplementary Information: The product herewith complies with the requirements of the Low Voltage Directive 72/23/EEC and the EMC Directive 89/336/EEC as amended by Directive 93/68/EEC. Vice-President of Engineering 8760 S. Sandy Parkway Sandy, Utah 84070, USA Date: August 12, 2002 European Contact: Your local DigiTech Sales and Service Office or Harman Music Group 8760 South Sandy Parkway Sandy, Utah 84070 USA Ph: (801) 566-8800 Fax: (801) 568-7583 IEC 60065 (1998) EN 55013 (1990) EN 55020 (1991)
WARRANTY: We at DigiTech are proud of our products and back-up each one with the following warranty: 1.The warranty registration card must be mailed within ten days after purchase date to validate this warranty. 2. DigiTech warrants this product, when used solely within the U.S., to be free from defects in materials and workmanship under normal use and service. 3. DigiTech liability under this warranty is limited to repairing or replacing defective materials that show evidence of defect, provided the product is returned to DigiTech WITH RETURN AUTHORIZATION, where all parts and labor will be covered up to a period of one year (this warranty is extended to a period of six years when the product has been properly registered by mail or through our website). A Return Authorization number may be obtained from DigiTech by telephone.The company shall not be liable for any consequential damage as a result of the product's use in any circuit or assembly. 4. Proof-of-purchase is considered to be the burden of the consumer. 5. DigiTech reserves the right to make changes in design, or make additions to, or improvements upon this product without incurring any obligation to install the same on products previously manufactured. 6.The consumer forfeits the benefits of this warranty if the product's main assembly is opened and tampered with by anyone other than a certified DigiTech technician or, if the product is used with AC voltages outside of the range suggested by the manufacturer. 7.The foregoing is in lieu of all other warranties, expressed or implied, and DigiTech neither assumes nor authorizes any person to assume any obligation or liability in connection with the sale of this product. In no event shall DigiTech or its dealers be liable for special or consequential damages or from any delay in the performance of this warranty due to causes beyond their control. NOTE:The information contained in this manual is subject to change at any time without notification. Some information contained in this manual may also be inaccurate due to undocumented changes in the product or operating system since this version of the manual was completed.The information contained in this version of the owner's manual supersedes all previous versions.

The Bass Synth Wah is an exciting combination of seven different synth and wah effects including envelope filter, synth tones, filter generators, and octave shift. The Bass Synth Wah can be run inline with your current pedals, or parallel with your bass tone to create unique combinations of both bass and synth sounds. 1. Sens Knob Controls the trigger sensitivity of the envelope, synth, and filter effects. Turn this knob clockwise to increase the sensitivity, and counter-clockwise to decrease the sensitivity. 2. Control Knob Controls different functions depending on which Bass Synth Wah Type is selected. See Effects Matrix on following pages for detailed Control knob descriptions. 3. AC Adapter Jack Connect a DigiTech PS200R (9VDC) power supply to this jack. Use the proper supply for your areas Mains line voltage.
Type 1- Env Filter 2- Sub Env 3- Synth 1 4- Synth 2 5- Filter 1 6- Filter 2 7- OctaSub
SENS Trigger Sensitivity Trigger Sensitivity Trigger Sensitivity Trigger Sensitivity Trigger Sensitivity Trigger Sensitivity Trigger Sensitivity
CONTROL Wet/Dry Mix Wet/Dry Mix Synth Attack Synth Attack Filter Attack Filter Attack Sub Level
RANGE Range Range Cutoff Freq Cutoff Freq Freq Envelope Freq Envelope Synth Level

Effects Matrix

4. Range Knob Controls different functions depending on which Bass Synth Wah Type is selected. See Effects Matrix on this page for detailed Range knob descriptions.
5.Type Knob Selects one of the seven different envelope, synth, or filter types: 1-ENV FILTER - Classic envelope filter sound. 2-SUB ENV - Envelope filter effect with an octave down pitch shift blended in. 3-SYNTH 1 - Monophonic synth tone generator with an opening filter envelope. 4-SYNTH 2 - Monophonic synth tone generator with a closing filter envelope. 5-FILTER 1 - Digitechs famous Synth Talk effect. 6-FILTER 2 - Synth Talk effect with inverse filter envelope. 7-OCTASUB - An octave down pitch shift effect with a variable synth effect mix using the RANGE knob. 6. Input Jack Connect your instrument to this jack. Connecting a 1/4 cable to this jack supplies battery power even though the Indicator LED may not be lit. To prolong battery life, disconnect cables when not in use.
7. Pedal Release Pins These two pins are spring-loaded hinges that hold the pedal in place. Push these pins in to release the pedal from the pedal chassis exposing the battery compartment. (See battery replacement diagram.) 8. Pedal Press the pedal to turn the effect on and off. 9. Out 1 Normal (Dry) Jack Use this output when only one amplifier or mixer channel is used. When both Out 1 Normal (Dry) and Out 2 (Effect) are connected, only dry, unprocessed bass signal is present at Out 1 Normal (Dry) when the Bass Synth Wah is on or bypassed.

10. Indicator LED This LED indicates when the effect is turned on. If the LED becomes dim or does not light when the cables are connected, the battery needs to be replaced. 11. Out 2 (Effect) Jack Connect this output to a second amplifier or to a mixer channel for effect signal only. When Out 2 is connected, only effect signal is present when the Bass Synth Wah is turned on. Out 2 is muted when the Bass Synth Wah is bypassed.

Connections

The Bass Synth Wah has a single input and a pair of outputs. When possible, the Bass Synth Wah should be the first effect pedal in your effects chain. This insures proper triggering of the different effects. Out 1 Normal (Dry) is used when the Bass Synth Wah is connected to a single amplifier or mixer input. When only Out 1 Normal (Dry) is used, effected signal is present when the Bass Synth Wah is on. When the Bass Synth Wah is bypassed, a dry unprocessed signal is present.
Out 2 (Effect) has effect signal only when the Bass Synth Wah is on, and is muted when bypassed. When Out 2 (Effect) is used, Out 1 Normal (Dry) becomes a dry path only when the Bass Synth Wah
effect is on or bypassed. This lets you mix dry bass signal and synth effect signal separately into two different inputs. An ideal setup is to have Out 1 Normal (Dry) connected to your bass amp and Out 2 (Effect) connected to a mixer channel. In this configuration, Out 1 Normal (Dry) sends a dry, unprocessed bass signal to your amplifier and Out 2 (Effect) sends only the effect signal to the mixer. This setup lets you control your amp and synth effect signals separately for dramatic bass/synth applications.

CIT Cabinet Modeling

The Bass Synth Wah also has built-in CIT cabinet modeling that can be enabled. CIT cabinet modeling simulates a 4x10 bass speaker cabinet, giving you a through-an-amp sound when running direct to a mixer or recording device. To Enable CIT Cabinet Modeling 1. Press and hold the Pedal down. 2. Apply power by either connecting a 1/4 instrument cable to the Bass Synth Wah Input or connect the PS200R power supply to the AC Adapter Jack. CIT cabinet modeling has to be turned on each time you apply power to the Bass Synth Wah.

Sample Settings

1. Funky Envelope

2. Slow Synth

3. Synth Bass

4. Synth Ya

5. Octa Sub Synth
Battery Replacement 1. Using the tip of a 1/4 cable, push one of the release pins in on either side of the pedal, and remove the pedal from the pedal chassis. 2. Remove the battery from the battery compartment and disconnect the battery cable. 3. Connect a new battery to the battery cable and put it back in the battery compartment. Make sure the battery cable does not interfere with the spring or pedal switch arm. 4. Place one hole of the pedal over its corresponding pin. 5. Push the opposite pin in and lower the other side of the pedal into place over the depressed pin. Release the pin. When the pedal is properly fastened, both release pins are flush with the outer side of the pedal.
Pedal Pedal Switch Arm 9V DC Battery Pedal Release Pin Battery Compartment Spring Pedal Release Pin Pedal Chassis
SPECIFICATIONS: Controls - Sens, Control, Range,Type, On/Off Pedal Jacks - Input, Out 1 Normal (Dry), Out 2 (Effect) Input Impedance - 1 MOhms Output Impedance - 100 Ohms Power Supply - 9V Alkaline Dry Battery Power Consumption - 4.8Watts (w/optional PS200R power supply) Battery Life - Approximately 4 hours (with continuous usage) Dimensions - 4 15/16(L) x 3 1/8(W) x 2 1/8(H) Weight - 1.38 lbs. Optional Power Supply PS200R - 100 (100V ~ 50/60Hz) PS200R - 120 (120V ~ 60Hz) PS200R - 230 (230V ~ 50Hz) PS200R - 240 (240V ~ 50Hz)
DigiTech 8760 South Sandy Parkway Sandy, Utah 84070 PH (801) 566-8800 FAX (801) 566-7005 DigiTech and X-Series are trademarks of the Harman Music Group Inc. Copyright - Harman Music Group Bass Synth Wah Envelope Filter Owners Manual 18-1813V-A Please visit DigiTech on the World Wide Web at: www.digitech.com Printed in China