Users Guide

DECLARATION OF CONFORMITY
Manufacturers Name: DigiTech Manufacturers Address: 8760 S. Sandy Parkway Sandy, Utah 84070, USA The symbols shown above are internationally accepted symbols that warn of potential hazards with electrical products. The lightning flash with arrowpoint in an equilateral triangle means that there are dangerous voltages present within the unit. The exclamation point in an equilateral triangle indicates that it is necessary for the user to refer to the owners manual. These symbols warn that there are no user serviceable parts inside the unit. Do not open the unit. Do not attempt to service the unit yourself. Refer all servicing to qualified personnel. Opening the chassis for any reason will void the manufacturers warranty. Do not get the unit wet. If liquid is spilled on the unit, shut it off immediately and take it to a dealer for service. Disconnect the unit during storms to prevent damage. declares that the product: Product name: Vocal 300 all (requires Class II power Product option: adapter that conforms to the requirements of EN60065, EN60742, or equivalent.) conforms to the following Product Specifications:
WARNING FORYOUR PROTECTION READ THE FOLLOWING:
KEEP THESE INSTRUCTIONS HEED ALL WARNINGS FOLLOW ALL INSTRUCTIONS The apparatus shall not be exposed to dripping or splashing liquid and no object filled with liquid, such as vases, shall be placed on the apparatus CLEAN ONLY WITH A DRY CLOTH. DO NOT BLOCK ANY OF THE VENTILATION OPENINGS. INSTALL IN ACCORDANCE WITH THE MANUFACTURERS INSTRUCTIONS. DO NOT INSTALL NEAR ANY HEAT SOURCES SUCH AS RADIATORS, HEAT REGISTERS, STOVES, OR OTHER APPARATUS (INCLUDING AMPLIFIERS) THAT PRODUCE HEAT. ONLY USE ATTACHMENTS/ACCESSORIES SPECIFIED BY THE MANUFACTURER. UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG PERIODS OF TIME. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or third prong are provided for your safety. If the provided plug does not fit your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Refer all servicing to to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. MAINS DISCONNECT: The plug shall remain readily operable. For rack-mount or installation where plug is not accessible, an all-pole mains switch with a contact separation of at least 3 mm in each pole shall be incorporated into the electrical installation of the rack or building.
Safety: IEC 60065-01+Amd 1 EMC: EN 55022:2006 EN 55024:1998 FCC Part 15 Supplementary Information: The product herewith complies with the requirements of the: Low Voltage Directive 2006/95/EC EMC Directive 2004/108/EC. RoHS Directive 2002/95/EC WEEE Directive 2002/96/EC With regard to Directive 2005/32/EC and EC Regulation 1275/2008 of 17 December 2008, this product is designed, produced, and classified as Professional Audio Equipment and thus is exempt from this Directive. With regard to Directive 2005/32/EC and EC Regulation 278/2009 of 6 April 2009, this regulation applies to Class A (single output) external power supplies. The external power supply used with this product is a multi-output power supply and thus is exempt from this Directive. Roger Johnsen Director, Engineering Signal Processing 8760 S. Sandy Parkway Sandy, Utah 84070, USA Date: March 3, 2011 European Contact: Your local DigiTech Sales and Service Office or Harman Signal Processing 8760 South Sandy Parkway Sandy, Utah 84070 USA Ph: (801) 566-8800 Fax: (801) 568-7583

ELECTROMAGNETIC COMPATIBILITY
This device complies with part 15 of the FCC Rules and the Product Specifications noted on the Declaration of Conformity. Operation is subject to the following two conditions: his device may not cause harmful t interference, and his device must accept any interference received, including interfert ence that may cause undesired operation. Operation of this unit within significant electromagnetic fields should be avoided. use only shielded interconnecting cables.
If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling. Private household in the 25 member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar new one). For Countries not mentioned above, please contact your local authorities for a correct method of disposal. By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.

Table of Contents

Introduction.. 1 Included Items.. 1 Top Panel... 1 Rear Panel.. 2 Connecting the Vocal 300.. 2 Mono Operation.. 2 Stereo Operation.. 3 Modes and Functions.. 4 Performance Mode.. 4 Edit Mode... 5 Store Mode.. 5 Bypass Mode... 5 Expression Pedal.. 6 Assigning a Parameter.. 6 V-Switch/Pedal Calibration. 7
Factory Reset.. 7 Effects and Parameters.. 8 Signal Path.. 8 Compressor.. 8 Mic Pre/Voice.. 8 Voice Parameters. 8 EQ... 9 Noise Gate.. 9 Mod.Effects.. 9 Mod Parameters..10 Delay...10 Reverb..10 Appendix..11 Preset List..11 Specifications..11

Warranty

We at DigiTech are very proud of our products and back-up each one we sell with the following warranty: 1. The warranty registration card must be mailed within ten days after purchase date to validate this warranty. 2. DigiTech warrants this product, when used solely within the U.S., to be free from defects in materials and workmanship under normal use and service. 3. DigiTech liability under this warranty is limited to repairing or replacing defective materials that show evidence of defect, provided the product is returned to DigiTech WITH RETURN AUTHORIZATION, where all parts and labor will be covered up to a period of one year. A Return Authorization number may be obtained from DigiTech by telephone. The company shall not be liable for any consequential damage as a result of the products use in any circuit or assembly. 4. Proof-of-purchase is considered to be the burden of the consumer. 5. DigiTech reserves the right to make changes in design, or make additions to, or improvements upon this product without incurring any obligation to install the same on products previously manufactured. 6. The consumer forfeits the benefits of this warranty if the products main assembly is opened and tampered with by anyone other than a certified DigiTech technician or, if the product is used with AC voltages outside of the range suggested by the manufacturer. 7. The foregoing is in lieu of all other warranties, expressed or implied, and DigiTech neither assumes nor authorizes any person to assume any obligation or liability in connection with the sale of this product. In no event shall DigiTech or its dealers be liable for special or consequential damages or from any delay in the performance of this warranty due to causes beyond their control. NOTE: The information contained in this manual is subject to change at any time without notification. Some information contained in this manual may also be inaccurate due to undocumented changes in the product or operating system since this version of the manual was completed. The information contained in this version of the owners manual supersedes all previous versions.

Introduction

The features and functions of the the Vocal 300s knob based matrix editing system are extremely user friendly. To familiarize yourself with the Vocal 300, we recommend you go through this Users Guide with your Vocal 300 in front of you.

Included Items

1. PS0913B Power Supply 2. Warranty Card
This User Guide, and the following items have been included with the Vocal 300:
The utmost care was taken while your Vocal 300 was manufactured. If anything is missing or not working, please contact the factory at once. To register your product for warranty benefits, please return the warranty card.

Top Panel

1. Down, up, and Bypass footswitches - Move through the Vocal 300s presets and bypass effects. 2. LOW, MIDRANGE, HIGH, AND MASTER LEVEL knobs - Adjusts the effects parameters in Edit mode. 3. Select button - Accesses edit mode and selects the effects to edit. 4. Matrix and LEDs - The matrix provides information regarding the current preset and parameter edit functions.

5. 6. 7. 8. 9.

Input Clip LED - Lights if the incoming signal is distorting. Display - Provides information for the different functions. Input Gain knob - Adjusts the input signal level. Store Button - Stores or copies presets to User preset locations. Expression Pedal - Controls the Vocal 300s parameters in real time.

Rear Panel

1. 1/8 CD Input - Connect the headphone output of your CD, tape, or MP3 player to this jack. This jack is used to sing-along with recorded music. 2. /4 Unbalanced Input - Connect a CD player, mixer, or other line level 1 device output to this jack. Note: If this input is used, the XLR input is disabled. 3. XLR Balanced Input - Connect a microphone to this jack. 4. XLR Balanced Mono Output - Connect to a mixer XLR input. 5. /4 TRS Stereo Output - Connect a 1/4 stereo Y cable to this out1 put (becomes a 1/4 Mono output if 1/4 mono TS plug is used). 6. 1/8 Headphone Output - Connect a pair of stereo headphones to this jack. 7. Power jack - Connect only the DigiTech PS0913B power supply to this jack.

Connecting the Vocal 300

Mono Operation
The Vocal 300 can be connected in several different ways. The following diagrams show a few possible options.
1. urn the Input Gain knob completely counter-clockwise (7 oclock) T position. 2. et the mixer channels fader to 0dB. S 3. Set the mixers master fader to its minimum position (no output signal). 4. Connect the microphone to the Vocal 300s XLR input. 5. onnect an XLR cable from the Vocal 300s XLR output to the XLR C mic input on the selected mixer channel.

6. hile singing, gradually turn up the Vocal 300s input gain knob until W the Input Clip LED lights with the strongest signals. 7. Gradually bring the mixers master fader up. Note: It may be necessary to consult your mixers owners manual for the proper mixer setup.

Stereo Operation

1. urn the Input Gain knob completely counter-clockwise (7 oclock) T position. 2. et the mixer channels fader to 0dB. S 3. Set the mixers master fader to its minimum position (no output signal). 4. Connect the microphone to the Vocal 300s XLR input. 5. onnect an 1/4 TS cable or stereo TRS Y cable from the Vocal 300s C 1/4 output to the 1/4 line input of the selected mixer channel. 6. Set the pan controls on the selected mixer channel hard left and hard right. 7. hile singing, gradually turn up the Vocal 300s input gain knob until W the Input Clip LED lights with the strongest signals. 8. Gradually bring the mixers master fader up. Note: It may be necessary to consult your mixers owners manual for the proper mixer setup.

Modes and Functions

Performance Mode
The Vocal 300 initially powers up in performance mode. SELECT Button - Enters edit mode. Each press of this button moves to the next row of effects in the matrix. Press and hold this button to return to performance mode. STORE Button - Begins the storing process. Input Gain knob - Sets the input gain for your microphone. LOW, Midrange, high, and Master Level Knobs - These knobs control the Bass, Mid Level, Treble, and Master Level of the presets. FOOTSWITCHES The UP and DOWN footswitches move through the presets (1-40 User and 41-80 Factory). Pressing the BYPASS footswitch bypasses all effects. While in preset bypass, you can select the next preset using the UP and DOWN footswitches. This preset will then be loaded when bypass is exited. Expression Pedal - Controls the assigned parameter of the current preset.

Edit Mode

The Vocal 300 lets you create your own presets, and modify existing presets. To create your own preset, do the following: 1. Select a User or Factory Preset. 2. Press the Select button. The Matrixs first effect row LED begins flashing. 3. odify the parameters in the selected row using the Low, Midrange, M High, and Master Level knobs. When changes are made, the Store LED lights, and the abbreviated parameter name with a space followed by a two digit parameter value is displayed. 4. To move to the next effect in the Matrix, press the select button again. 5. ress the Store button to save your changes. P Note: Pressing the Up or DOWN footswitches returns you to Performance mode. Pressing the BYPASS footswitch bypasses all effects.

Store Mode

After modifying a preset, you must store your settings to one of the 40 User Preset locations. To store changes to a preset or store a preset to a different location, do the following: 1. ress the Store button. The Store LED begins blinking on and off, and the P first character of the name flashes. 2. se the Low knob to change the character. Use the Midrange knob to U move to the next character (left or right) in the name. 3. Press the Store button again. The presets name and number are displayed. 4. f you want to change where the preset is stored, rotate the Master Level I knob to select a new preset location. Only User presets 1-40 can be overwritten. 5. ress the Store button a final time to store your changes. Stored followed P by the preset name is displayed. Note: Pressing the Select button aborts the storing process.

Bypass Mode

The Vocal 300 can be bypassed so only a clean, unprocessed signal is heard. To bypass the Vocal 300, do the following: 1. Press the Bypass footswitch. Bypass appears in the display. 2. ress the Bypass footswitch again to return to performance mode. If a new P preset was selected while in bypass mode, you will exit bypass mode to the new preset. If a new preset was not selected, you will return to the preset in use before you entered bypass mode.

Expression Pedal

Assigning a Parameter
The Vocal 300 includes a built-in Expression pedal. The Expression pedal is used to control many of the Vocal 300s effect parameters in real time. To assign a parameter to the Expression pedal, do the following: 1. Select a User or Factory Preset. 2. ress the Select button until the Matrixs last effect row LED begins P flashing. 3. Rotate the Low knob to select the Expression pedal 1,2, or 3. Note: You can assign three parameters to the Expression pedal per preset. 4. otate the Midrange knob to select the parameter the pedal will conR trol. 5. otate the High knob to adjust the minimum value the pedal (toe up) R reaches. 6. otate the Master Level knob to adjust the maximum value the pedal R (toe down) reaches. 7. ress the Store button to store the changes. See page 5 for more inforP mation on storing presets. The following is a list of the parameters that can be Expression pedal: Parameter Display Min Value Voice Param 1 Varies Varies Voice Param 2 Varies Varies Voice Level Voxlvl1 Effect Speed Speed1 Effect Amount amount1 Effect Level Fx lvl 0 Effect Mix Fx MIX0 Whammy whmamt1 Delay Feedback fback 1 Delay In Level Dly in0 Delay Out Level Dlyout0 Reverb Decay Decay1 Reverb In Level Rev in0 Reverb Out Level Revout0 Volume Pre Volpre------ Volume Post volpst------ assigned to the Max Value Varies Varies 99 R-hold 99 -----------

V-Switch/Pedal Calibration
The Vocal 300 has an expression pedal feature called V-Switch. V-Switch is a pressure sensitive virtual switch, that turns the Vocal Character module off and on. The expression pedal must be calibrated for the Vocal Character module to work. The expression pedal will continue to control the parameter it is assigned to regardless of the Vocal Character status. However, it is important to calibrate the expression pedal for it to function properly. To calibrate the expression pedal, do the following: 1. ress the Down footswitch and connect the power. CALIB briefly disP plays, and then TOE DN is displayed. 2. Press the expression pedal forward (toe down). 3. Press a footswitch, and TOE UP appears in the display. 4. Press the expression pedal toe up. 5. Press a footswitch, and VSWTCH appears in the display. 6. o calibrate the V-Switch press down hard on the toe until DONE appears T in the display. The sensitivity value appears in the numeric display. The display toggles between VSWTCHOn and VSWTCHOf. 7. (Optional)Rotate the Master Level knob to adjust the V-Switch sensitivity. 8. ress any footswitch to return to Performance mode with the changes P saved.

Factory Reset

This function resets the Vocal 300 to its original factory status. This procedure erases all custom user presets, and requires the expression pedal be recalibrated. To complete a factory reset, do the following: 1. Disconnect the power supply from the Vocal 300. 2. Press and hold the Select button while connecting the power supply. 3. When reset? displays, release the button and press the Store button. reset is displayed and the and Vocal 300 is reset. 4. alibrate the expression pedal (see previous section). C

Effects and Parameters

Signal Path

Compressor

The compressor module is used to control the dynamics of varying signal strengths. On/Off - Rotate the Low knob to turn the effect on and off. Type - Rotate the Midrange knob to select the type of compression to be used, Low, Medium or High. Gain - Rotate the Midrange knob to increase the compressors output gain.

Mic Pre/Voice

This module selects various mic preamp and voice character types. Tube Pre is a warm professional mic preamp type for standard vocal usage. Overdrive and Grunge are cutting edge distortion preamp types. The other 9 voice characters produce wild and unnatural vocal sounds. Voice - Rotate the Low knob to select a vocal character. Voice types are: Tube Pre, Overdrive, Grunge, Dark Side, Monster, Chipmunk, Lunar, Lo-Fi, Robot, Wizard, Alien, and Telephone. Parameter 1 Rotate the Midrange knob to adjust the first parameter of the Voice type selected. (see Voice Parameter chart following these instructions) Parameter 2 Rotate the high knob to adjust the second parameter of the Voice type selected. (see Voice Parameter chart following these instructions) Level - Rotate the Master Level knob to controls the preset level for the selected model.

Voice Parameters

Character Param 1 Tube Pre Gain OverdriveGain
Display Param 2 Display gainDe-Esser de ess gainDe-Esser de ess
Character Param 1 Display Param 2 GrungeGain gainDe-Esser Dark Side Breath breathn/a MonsterSize sizeGrowl ChipmunkSize sizen/a LunarRangerangen/a Lo-FiGain gain Sub Frequency RobotRange rangeEdge WizardRange rangen/a AlienRate rateIntensity intens Telephone Sub FrequencysubfrqSibilance
Display de ess growl subfrq edge

siblnc

The EQ module is a 3-band EQ consisting of Bass, Mid and Treble. The frequency centers for each band may vary depending on the selected model. Bass Rotate the Low knob to adjust the low frequency gain. Midrange - Rotate the Midrange knob to adjust the midrange frequency gain. Mid Frequency - Rotate the high knob to adjust the midrange frequency. High - Rotate the master level knob to adjust the high frequency gain.

Noise Gate

The noise gate eliminates unwanted noise when a signal isnt present. Gate On/Off - Rotate the Low knob to turn the noise gate on and off. Threshold - Rotate the Midrange knob to select the noise gates threshold. A higher setting requires a stronger signal to open the gate.

Mod.Effects

The Mod Effects module has several effects to choose from: Off, Chorus, Flanger, Phaser, Tremolo, Vibrato, Strobe, Doubler, Envelope, Pixelator, Detune, Pitch, and Whammy. When the Mod. Effects row is selected, the following settings apply: Type/Off - otate the Low knob to select an effect and turn the effect on and R off. Parameter 1 - Rotate the Midrange knob to adjust the first parameter of the selected effect type (see the parameter list following these instructions). Parameter 2 - Rotate the High knob to adjust the second parameter of the selected effect type (see the parameter list following these instructions). Mod Level - Rotate the Master Level knob to control the effects level. Note: Only one of the effects in this row can be used at a time.

Mod Parameters

Effect Parameter 1 Parameter 2 Chorus Speed Depth Flanger Speed Depth Phaser Speed Depth TremoloSpeed Depth VibratoSpeed Depth StrobeSpeed Depth Doubler n/a n/a Envelope Range Sensitivity Pixelator Amount Speed Detune Amount n/a Pitch Amount n/a Amount Whammy Amount Whammy

Mod Level wet level wet/dry mix wet/dry mix n/a n/a n/a wet level wet/dry mix wet/dry mix wet level wet/dry mix wet/dry mix
Delay records a portion of the incoming signal, and plays it back a short time later. The recording can repeat just once or several times. The Delay module has three types of delay effects: Digital, Analog, and Ping Pong. Type /Off - Rotate the low knob to select the delay type and to turn the delay on and off. Delay Time - Rotate the midrange knob to select the delay time. Feedback - Rotate the high knob to select the number of delay repeats and the repeat hold. Delay Level - Rotate the Master Level knob to adjust the delay effect level.

Reverb

Using reverb in recorded program material gives the listener a sense that the material is being performed in an actual room or hall. This similarity to actual acoustic space makes reverberation a useful tool in recorded music. Type/Off - otate the Low knob to select 1 of 8 reverb types and to turn the R reverb on and off. Decay - Rotate the midrange knob to adjust the reverb decay time. Damping - otate the High knob to adjust the amount of high frequency R damping in the reverb signal. Reverb Level - Rotate the Master Level knob to adjust the effects input level.

Appendix

Preset List
Number 1/41 2/42 3/43 4/44 5/45 6/46 7/47 8/48 9/49 10/50 11/51 12/52 13/53 14/54 15/55 16/56 17/57 18/58 19/59 20/60 Preset Name Display Name Vocal Delay vocdly Monster monster 50's Slapback Delay slapbk Grunge Vocal grunge Thicken thickn Vocal Plate plate Wah Voice wahvoc Vibrato vibrto Tube Mic Preamp tubpre Oh Yeah! ohyeah Breathy brethy 5th Up Pitch Shift 5th up Telephone telphn Alvin alvin Strobovoice strobe Rich Detune detune Lo-Fi lo fi Phased Pong phspng Compressed cmprssd Dark Force force Number 21/61 22/62 23/63 24/64 25/65 26/66 27/67 28/68 29/69 30/70 31/71 32/72 33/73 34/74 35/75 36/76 37/77 38/78 39/79 40/80 Preset Name Display Name Wizard wizard Warm Tube Delay tubdly Distorted Tremolo dstrem Karaoke Delay karoke Mars Man mars Whammy Man whaman Big Verb bigvrb Distorted Delay dstdly Helium helium Cyborg cyborg Billy Goat goat Invaders invadr Megaphone megphn Chorus Verb chorvb Wiggle wiggle Monster Pong monpng Robot robot Stutterer stuttr Pixelator pixltr Space Reverb space

Specifications

Line Input: 1/4 TS Unbalanced CD Input: 1/4 TRS Stereo Mic Input: Balanced XLR Mic Output: Balanced XLR Stereo Output: 1/4 TRS Stereo Headphone Output: 1/8 TRS Stereo A/D/A Converter: 24 bit Delta SIgma Sample Rate: 44.1 kHz Frequency Response: 20-20kHz +0, -3dB Signal to Noise: 97dB (A weighted); ref = max level, 22kHz bandwidth Equivalent Input Noise (EIN): 120dB (A weighted) 150 Ohm Source Impedance, 22kHz bandwidth THD: Less than 0.04% (1kHz) Memory: 40 User Presets/40 Factory Presets Power Supply: 9V AC, 1.3A (PS0913) Power Consumption: 10 Watts Dimensions: 8.5 L x 13 W x 2.25 H Weight: 3.75 lbs

8760 S. Sandy Parkway, Sandy, Utah 84070 PH (801) 566-8800 FAX (801) 566-7005 International Distribution 8760 S. Sandy Parkway, Sandy, Utah 84070 USA PH (801) 566-8800 FAX (801) 566-7005 DigiTech and Vocal 300 are trademarks of Harman Copyright Harman Printed in China Vocal 300 Owners Manual 18-1316V-B Please visit DigiTechon the World Wide Web at: http://www.digitech.com