Reviews & Opinions
Independent and trusted. Read before buy Epson P-6000!

Epson P-6000

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Epson P-6000, size: 2.3 MB
Related manuals
Epson P-6000 Brochure
Epson P-6000 Quick Start Guide
Epson P-6000 Storage Viewer Travel Pack
Epson P-6000 Basic Operation Guide
Epson P-6000 Travel Pack Manual

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Epson P-6000Epson Multimedia Photo Viewer P-6000 - Digital AV player - 80 GB - 4 in

inc: Wrist strap, USB cable, carrying case

Back up, store and view your images in vibrant color and detail, PC-free. An essential tool for on-the-go photographers, the Epson P-6000 features superior image quality and a high capacity hard drive. The perfect partner to your digital SLR camera, this innovative device makes it easier than ever to backup and view thousands of photos on the spot. Quickly store and backup images right from your memory card. Preview both RAW and JPEG images with the Photo Fine Premia LCD, exclusively from Epson.... Read more

 

[ Report abuse or wrong photo | Share your Epson P-6000 photo ]

Video review

Preview BiT 124 Epson P6000

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 6. Page 1 of 1. Average Rating:
anezio 4:04am on Monday, September 6th, 2010 
brilliant product This is a great product. Useful backup For Screen size and viewing Memory size Relatively easy to use Against Speed of backup is glacial and uses battery power quickly Cost
mikethompson 12:56pm on Thursday, August 5th, 2010 
CREATIVE ZEN - Mosaic - Dated: 26/02/2009 Storage Capacity: 4GB Titled: Anyone for chess ------------------------------ Manufacture Details > Creat... Forget your usual mp3 player, nowadays people are looking for more than something to play music on.
suprathepeg 7:54am on Tuesday, July 13th, 2010 
great viewer essy to use great viewer . real easy to use . let my wife and daughter use it they did fine with out reading the manual .
perloc 4:26pm on Wednesday, May 5th, 2010 
The results of their shooting, Epson P-7000 Multimedia Photo Viewer is indeed needed. In addition to the store with a very large capacity.
Telecodocus 2:56pm on Wednesday, April 21st, 2010 
P-7000 from Epson is something of a surprise. It costs a lot more than most and is considerably bigger.
jimatartsnova 6:42am on Thursday, March 25th, 2010 
Download Pictures to device for ease of transport Purchased this product to give me the ability to download pictures and movies to a device that is ea... Nice piece of kit I recently switched from a 15" to a 17" laptop, which meant that, under no circumstances. SOFTWARE IS CRAP I have had this viewer for almost three years and have always had problems with the software between my PC with Windows XP and the vi...

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Date: PSB #: Reference: Product(s): Subject:

PRODUCT SUPPORT BULLETIN

06/04/2010 Originator: TC PSB.2010.06.001 Authorization: TE10- 0056. Rev. A Total Pages: 5 Epson P-6000 and P-7000 Multimedia Photo Viewers Firmware Update 2.51
This bulletin was created to inform you of a firmware update to version 2.51 for the P-6000/P7000 multimedia viewers. The updated firmware adds a feature and corrects the following issues as outlined below.
Description of Change: The firmware has been updated to 02.51. This firmware updates DSLR camera support for RAW processing---see complete list of compatible cameras in the following sections. This firmware release includes all modifications incorporated into previous versions up to and including v.2.40. Important Notes: If your viewer has firmware 1.57 to 2.40 you can update directly to 2.51--see list below. 01.57.7431-0110-0200-0112 01.71.7506-0110-0200-0112 02.05.0111-0110-0200-0112 02.05.0111-0110-0200-0121 02.40.0179-0110-0200-0121 The following older firmware versions must first be updated to version 1.57 before updating to firmware 2.51: 01.29.6838-0108-0107-0112 01.30.7099-0108-0107-0112 01.31.7104-0108-0107-0112
P-6000 / P-7000 Improvements: This firmware version adds tethering support for the following DSLR models: Nikon: D3S Canon: EOS 7D / 500D
Note: Other Nikon and Canon DSLR cameras may work, but Epson has not evaluated or
confirmed them. Some features may not work. The Pictures will be stored into the memory card and on the Epson viewer. The viewer can send a command to the camera to take a picture.

Page 1 of 5

PSB.2010.06.001
For more information on tethering functions and features refer to the Tethering manual pdf document included with this bulletin.
The new firmware also provides the following improvements and/or fixes: The following list of DSLR cameras supports the RAW processing feature. This is not a list for RAW full screen view support. For a complete list of cameras that support RAW file format refer to the P-6000/P-7000 Frequently Asked Questions (FAQs) posted on this products support page at www.epson.com. The RAW processing feature is now supported on the following DSLR cameras: Nikon: D3S / D300S / D3000 Canon: EOS 7D PENTAX: K-x SONY: A-230 / A-330 / A-380
1. Tether feature can be started directly by pressing DISPLAY button on HOME screen. 2. Select data to transfer" in tethering mode now displays when the camera is set to shoot in both RAW+JPEG mode. 3. The data transfer progress bar display position has been modified. 4. Corrects Pentax K20D RAW file processing errors under high ISO conditions. 5. Corrects color processing on Canon 5D Mk II and Nikon D3X RAW files. The following is a list of limitations for RAW processing feature. This also applies to older firmware. (1) RAW processing is not supported on Nikon D3X, D3, D700 and other models that use Hi-2 and Compressed RAW formats. (2) RAW processing is not supported on the Nikon D2Hs, D2H, and D100. (3) On the Canon EOS 20D, RAW files from cameras with older firmware may not support RAW processing. (4) On the Canon EOS 40D, 50D, RAW processing cannot be used on sRAW / mRAW. (5) On the Canon EOS 5D Mark II, RAW processing cannot be used on sRAW1 and sRAW2. (6) RAW processing is not supported on the Canon EOS 1Ds Mark II, EOS 1Ds, EOS 1D Mark III, EOS 1D Mark II, EOS 1D. (7) RAW processing is not supported on the Olympus E-1, E-3, E-300, E-410, E-420, E510, E-520, and E-P1. (8) RAW processing is not supported on the Sony 550, 700, 900. (9) Firmware 2.51 can now capture RAW file resolution information. Note: if the viewer does not display this information, clear the cache file. Follow these steps to delete the cache files from the viewer: On the Home screen, press the Menu key. Select [Settings], then [Delete all cache files]. Press OK. (10) Small bright spots may sometimes appear when using RAW processing on a SONY Alpha series RAW file.

Page 2 of 5

(11) On rare occasions the viewer screen may go blank when connecting or disconnecting the camera. If this happens the viewer is still working. Repluging the USB cable/AV jack may fix this. You can also turn off the viewer if needed.
P-6000/P-7000 Firmware Update Instructions: Note: Before starting the firmware update process, confirm that there are no files on the memory card. The card should be formatted on a computer with a Memory Card reader and not in the camera. To download and install the new firmware file, you will need the following: Windows-based PC or Macintosh computer with Internet access Operating Systems: Windows 2000/XP Home/Pro/XP/XP Pro x64 Edition/Vista/ Windows 7; Macintosh OS 10.2.8 to 10.6.x Memory card reader/writer Formatted Compact Flash (16MB to 8GB), SD memory card (16MB to 2GB); or 2GB to 32GB SDHC card. Note: there must be no data on the card P-6000/P-7000 battery installed (fully-charged battery recommended) AC adapter must be plugged in to a wall socket and connected to the viewer before the firmware update can be performed.

Firmware Update Procedure: Download the file epson13865.exe for Windows users or epson13866.dmg for Mac users from the Epson website (www.epson.com). Follow the on-screen instructions to download and extract the file onto your computer. For PC users all files will be extracted to C:\EPSON\epson13865_firmware_update_251. For Mac users all files will be extracted to epson13866_firmware_update_251 on the desktop. To verify the current firmware version on your viewer: (1) Power on the unit (2) From the Home screen go to Settings and press OK. (3) Select Device Information and use the 4 way ring to select the firmware version menu. Press OK. If you have firmware version 01.57.7431-0110-0107-0112 or later installed on your viewer then proceed to the next section. Note: See bulletin PSB.2009.06.003 / PSB.2009.09.002 or PSB.2009.11.001 for upgrading from firmware versions prior to 1.57.
Steps: Install a blank memory card into a memory card reader/writer and copy the PSV5FIRM folder (including all the files in the folder) to the root directory of the memory card. Verify that the battery is installed in the P-6000 or P-7000 viewer. Connect the AC adapter to the viewer, but do not power it on.

Page 3 of 5

After the firmware file has been copied to the memory card, insert the Compact Flash or SD memory card into the viewer. Press and hold down the OK and keys while sliding the POWER switch as shown below.
Warning: Do not turn off the viewer or attempt to remove the battery or disconnect the AC
adapter at any time during the firmware update. When you see the EPSON logo name, release the OK and will begin and take approximately 3.5 minutes to complete. keys; the main firmware update
NOTE: The Sub CPU firmware update is not installed in this version. Do not be alarmed if the Sub CPU firmware update says not available. Once the firmware update is completed you should see this screen.
Power off the viewer and remove the Compact Flash or SD memory card. Then turn the viewer back on. Note: Do not press any keys when turning on the unit. Set the Date and Time if prompted. On the Home screen, press the Menu key. Select [Settings], then [Delete all cache files]. Press OK. If you see a dialog box prompting you to connect the AC adapter, click OK. You will then see a progress bar until the process is completed.
Open Settings from the Home screen and select Device Information. In Device Information select Firmware Version. The new firmware version 02.51.0325-0110-0200-0123 will be

Page 4 of 5

displayed under [Copyright(C) 2008 SEIKO Epson CORP.] This means that the firmware update has completed correctly. NOTES: IMPORTANT: If you update to firmware Ver 1.57 temporarily before updating to 2.51, PLEASE DO NOT TURN OFF THE UNIT DURING THE IPL UPDATE. If it is interrupted, DAMAGE to the Viewers MAIN BOARD may occur and the unit will need to be repaired. If the firmware 2.51 update failed, or if the viewer was inadvertently turned off during firmware update (except IPL update on Ver1.57 as mentioned above), please perform following steps: 1. Remove the PSV50251.FNC file from the PSV5FIRM folder on the memory card that is used in this update. 2. Insert memory card into viewer. 3. Turn on viewer with RATE ( ) + DISPLAY pressed. 4. Main F/W Update message is displayed, and release key when you see the memory card access LED blink. 5. It takes about 4 minutes, then Please turn off message is displayed. The viewer will be turned off automatically. 6. Turn it on again, and if you see the HOME screen, recover has completed. There is no need for any further updates. If the update does not start, please check following and do the update again: 1. Check to see if the SD / CF memory card is defective or not. 2. Check whether the CF card capacity is 16GB or larger. 3. Check PSV5FIRM folder existence in memory card root folder. Please check the following if you see a different message: 1. Check whether the AC adapter is connected, and AC power is correctly supplied. 2. Check battery insertion. 3. Check whether the SD card is formatted by the SD supporting device. 4. Check whether the folder PSV5FIRM folder has PSV50251.FNC file. 5. Check whether the PSV50251.FNC has 8,191 KB in size. Check the following if the updated version is different: 1. If the version is displayed as 02.51.0325-0108-0107-0123, then the 2.51 update was executed on a viewer that had a firmware prior to the Ver 1.57 firmware update. 2. Please perform the firmware update Ver 1.57, and re-perform Ver 2.51 firmware update again. 3. If the version is displayed as 02.51.0325-0108-0200-0123 or 02.51.0325-0110-01070123, please update the Ver 1.57 firmware again, then perform Ver 2.51 again.

Page 5 of 5

10/29/2009 Originator: TC PSB.2009.11.001 Authorization: TE09-0159 Rev. A, TE09-0590. Rev A Total Pages: 6 Epson P-6000 and P-7000 Multimedia Photo Viewers Firmware Release version 02.40 with Tether feature
This bulletin was created to inform you of a firmware update for the P-6000/P-7000 multimedia photo viewers. The updated firmware adds a feature and corrects the following issues as outlined below.
Description of Change: The firmware has been updated to 02.40. A new Tethering feature is supported in this firmware version, it allows photographers to instantly view and save images to the viewer as they are shot, streamlining the process of creating backup files and evaluating images in studio or on location. This feature is compatible with select Nikon and Canon DSLR cameras. A full list of compatible cameras for tethering is listed below. This firmware also has an update to support new DSLR cameras for the viewers RAW processing feature. This firmware release includes all modifications up to Ver.2.05.
Important Notes This update can be applied to P-6000/P-7000 units with Firmware Ver 1.57 or later as shown below: 01.57.7431-0110-0200-0112 01.71.7506-0110-0200-0112 02.05.0111-0110-0200-0121 The following older firmware versions must first be updated to version 1.57 before updating to firmware 2.40: 01.29.6838-0108-0107-0112 01.30.7099-0108-0107-0112 01.31.7104-0108-0107-0112 See the Graphic below for the proper upgrade path:

Page 1 of 6

PSB.2009.11.001
1.29 1.30 1.31 1.57 1.71 2.05 2.40 Legend : Firmware Version. : Update or downgrade available.
P-6000 / P-7000 Improvements: A new function Tethering feature is supported in this firmware version. The following DSLR cameras are confirmed to be available for Tethering. Only Nikon and Canon cameras are supported. Nikon D3X, D3, D700, D300S , D300, D90, D5000, D200, D80 Canon EOS 1Ds Mark III, 1D Mark III, 5D Mark II, 50D, 40D, Digital Rebel T1i
Note: Other Nikon and Canon DSLR cameras may work, but Epson has not evaluated or confirmed them. Some features may not work. The Pictures will be stored into the memory card and PhotoViewer. The PhotoViewer can send an order to the camera to take a picture. For more detailed information on Tethering functions and features refer to the included Tethering_Manual.pdf file.
The new firmware also provides the following improvements and/or fixes: Please note that the following list of DSLR cameras is for support of the PhotoViewers RAW processing feature, this is not a list of RAW Full Screen viewing support, for a complete list of supported cameras and RAW file viewing support refer to the Epson.com P-6000 or P-7000 support page under Frequently Asked Questions (FAQs) 1. Added RAW processing feature for: Nikon: D3x / D5000 Canon: EOS 5D Mark II Pentax: K-7 2. HDD Free Space information is now shown on the Viewers HOME screen. 3. New Power Saving setting feature is added to the Tethering feature. Page 2 of 6

4. Following DSLR are now supported or confirmed to work with the Tethering feature: Nikon: D300s/D5000/D200/D80 5. Bug Fix: Images were not processed correctly when the image is 5:4 aspect ratio and in portrait orientation. 6. Bug Fix: An error occurred on Print Wizard when [Reset Cropping] is selected multiple times. 7. Bug Fix: Sometimes the string scroll is stopped on long key press. 8. Bug Fix: EPSON Link2 does not recognize a date folder as new folder which is once copied to PC, and new files are added with Tethering feature after that. 9. Bug Fix: Lexar JumpDrive 32GB was not recognized as a USB device. 10. Bug Fix: Sort order was not correct on Rating Filter.
The following is a list of limitations for RAW processing feature. This also applies to older firmware. Again this information refers to the Viewers RAW processing feature, this is not a list of RAW Full Screen viewing support, for a complete list of supported cameras and RAW file viewing support refer to the Epson.com P-6000 or P-7000 support page under Frequently Asked Questions (FAQs) (1) Nikon D3x, D3, D700, D70, D300, D300s, any other models that support Hi-2 and Compressed RAW formats, these files do not support RAW processing. (2) Nikon D2Hs, D2H, and D100: do not support RAW processing. (3) Canon EOS 20D: RAW files from cameras with an older firmware may not support RAW processing. (4) Canon EOS 40D, 50D: sRAW is not available for RAW processing feature. (5) Canon EOS 5D Mark II: sRAW1 and sRAW2 are not available for RAW processing. (6) Canon EOS 1Ds Mark II, EOS 1Ds, EOS 1D Mark III, EOS 1D Mark II, EOS 1D are Not supported for RAW processing. (7) Olympus E-1, E-3, E-300, E-410, E-420, E-510, E-520, E-P1: are not supported for RAW processing. (8) Sony 230, 330, 380, 550, 700, 900: are not supported for RAW processing. (9) The new 2.40 viewer firmware can now get RAW file resolution information; however, the older firmware could not get the resolution information. The older firmware does not show RAW file resolution but the information is cached on the viewer. The new firmware can get the resolution but use the cached information. As a result, some newly supported RAW file may have no RAW image resolution. To avoid this issue, the cache files must be deleted. Follow this process to delete the cache files: On the Home screen, press the Menu key. Select [Settings], then [Delete all cache files]. Press OK.

P-6000/P-7000 Firmware Update Instructions: Note: Before starting the firmware update process, confirm that there are no files on the memory card. The card should be formatted on a computer with a Memory Card reader and not in the camera. To download and install the new firmware file, you will need the following: Page 3 of 6
Windows-based PC or Macintosh computer with Internet access Operating Systems: Windows 2000/XP Home/Pro/XP/XP Pro x64 Edition/Vista/ Windows 7; Macintosh OS 10.2.8 to 10.6.x Memory card reader/writer Formatted Compact Flash (16MB to 8GB), SD memory card (16MB to 2GB); or 2GB to 32GB SDHC card. Note: there must be no data on the card P-6000/P-7000 battery installed (fully-charged battery recommended) AC adapter must be plugged in to a wall socket and connected to the viewer before the firmware update can be performed.
Firmware Update Procedure: Download the file epson13553.exe for Windows users or epson13554.dmg for Mac users from the Epson website (www.epson.com). Follow the on-screen instructions to download and extract the file onto your computer. To verify the current firmware version on your viewer: (1) Power on the unit (2) From the Home screen go to Settings and press OK. (3) Select Device Information and use the 4 way ring to select the firmware version menu. Press OK. If you have firmware version 01.57.7431-0110-0107-0112 or later installed on your viewer then proceed to the next section. If you have any of the versions listed below, you must first update to version 01.57.7431-0110-0107-0112 or higher before updating to version 2.40. See bulletin PSB.2009.06.003 or PSB.2009.09.002 for more information on upgrading. 01.29.6838-0108-0200-0112 01.30.7099.0108-0200-0112 01.31.7104-0108-0200-0112
Steps: Install a blank memory card into a memory card reader/writer and copy the PSV5FIRM folder (including all the files in the folder) to the root directory of the memory card. Verify that the battery is installed in the P-6000 or P-7000 viewer. Connect the AC adapter to the viewer, but do not power it on. After the firmware file has been copied to the memory card, insert the Compact Flash or SD memory card into the viewer. Press and hold down the OK and keys while sliding the POWER switch as shown below.

Page 4 of 6

Warning: Do not turn off the viewer or attempt to remove the battery or disconnect the AC adapter at any time during the firmware update. When you see the EPSON logo name, release the OK and keys; the main firmware update will begin and take approximately 3.5 minutes to complete. The Sub CPU firmware update is not installed in this version. Do not be alarmed if the Sub CPU firmware update says not available. Once the firmware update is completed you should see this screen.
Power off the viewer and remove the Compact Flash or SD memory card. Then turn the viewer back on. Note: Do not press any keys when turning on the unit. Set the Date and Time if prompted. On the Home screen, press the Menu key. Select [Settings], then [Delete all cache files]. Press OK. If you see a dialog box prompting you to connect the AC adapter, click OK. You will then see a progress bar until the process is completed. Open Settings from the Home screen and select Device Information. In Device Information select Firmware Version. The new firmware version 02.40.0179-0110-0200-0121 will be displayed under [Copyright(C) 2008 SEIKO Epson CORP.] This means that the firmware update has completed correctly. NOTES: Page 5 of 6
IMPORTANT: If you update to firmware Ver 1.57 temporarily before updating to 2.40, PLEASE DO NOT TURN OFF THE UNIT DURING THE IPL UPDATE. If it is interrupted, DAMAGE to the Viewers MAIN BOARD may occur and the unit will need to be repaired. If the firmware 2.40 update failed, or if the viewer was inadvertently turned off during firmware update (except IPL update on Ver1.57 as mentioned above), please perform following steps: 1. Remove the PSV50240.FNC file from the PSV5FIRM folder on the memory card that is used in this update. 2. Insert memory card into viewer. 3. Turn on viewer with RATE () + DISPLAY pressed. 4. Main F/W Update message is displayed, and release key when you see the memory card access LED blink. 5. It takes about 4 minutes, then Please turn off message is displayed. The viewer will be turned off automatically. 6. Turn it on again, and if you see the HOME screen, recover has completed. There is no need for any further updates. If the update does not start, please check following and do the update again: 1. Check to see if the SD / CF memory card is defective or not. 2. Check whether the CF card capacity is 16GB or larger. 3. Check PSV5FIRM folder existence in memory card root folder. Please check following if you see the different message: 1. Check whether the AC adapter is connected, and AC power is correctly supplied. 2. Check battery insertion. 3. Check whether the SD card is formatted by the SD supporting device. 4. Check whether the folder PSV5FIRM folder has PSV50240.FNC file. 5. Check whether the PSV50240.FNC has 8,000 KB in size. Check following if the updated version is different: 1. If the version is displayed as 02.40.0179-0108-0107-0121, then the 2.40 update was executed on a viewer that had a firmware prior to the Ver 1.57 firmware update. 2. Please perform to firmware update on Ver 1.57, and re-perform to Ver2.40 firmware update again. 3. If the version is displayed 02.40.0179-0108-0200-0121, or 02.40.0179-0110-01070121, please update the Ver 1.57 firmware again, then perform Ver 2.40 again.

Page 6 of 6

7/29/2009 Originator: PSB.2009.09.002 Authorization: TE09-0076 Rev. A Total Pages: Epson P-6000 and P-7000 Multimedia Photo Viewers Firmware Release version 01.71.7506
This bulletin was created to inform you of a firmware update for the P-6000/P-7000 multimedia photo viewers. The updated firmware corrected the following issues as outlined below.
Description of Change: The firmware has been updated to 01.71.7506.
P-6000 / P-7000 Improvements: The firmware provides the following improvements and/or fixes: 1) Fixes a white balance problem on RAW image pictures taken on a Canon EOS Kiss F digital SLR camera. 2) Fixes [Edit]Lock/Unlock function so that it works properly on images where a Rating key and the [Deselect All] settings are used at the same time. 3) Fixes problem with reading files that come on a CD or DVD.
4) Additional RAW file support. The P-6000 / P-7000 support images in RAW format with the following digital SLR cameras. The additional supported cameras and extensions are listed in blue below: Additional RAW file support for highlighted models:

Manufacturer Models

EOS 5D, 10D, Digital Rebel, Digital Rebel XT, Digital Rebel XTi, 20D, Digital Rebel Xsi, Digital Rebel XS, 30D, 40D, EOS 50D R-D1, R-D1s D2X, D2Xs, D3, D60, D70, D70s, D80, D50, D40, D40X, D200, D300, D700, D90 E-330, E-500 *istD, *istDs, *istDL, *istDs2, *istDL2, K100D, K10D, K20D, K100D Super, K200D, K-m DSLR-A100, DSLR-A200, DSLR-A300, DSLRA350 Page 1 of 4

PSB.2009.09.002

Epson Nikon Olympus Pentax Sony
P-6000/P-7000 Firmware Update Instructions: Note: Before starting the firmware update process, confirm that there are no files on the memory card. To download and install the new firmware file, you will need the following: Windows-based PC or Macintosh computer with Internet access Operating Systems: Windows 2000/XP Home/Pro/XP/XP Pro x64 Edition/Vista; Macintosh OS 10.2.8 to 10.5.x Memory card reader/writer Formatted Compact Flash (16MB to 8GB) or SD memory card (16MB to 2GB); no size limit on an SDHC card---Note: there must be no data on the card P-6000/P-7000 battery installed (fully-charged battery recommended) AC adapter must be plugged in to a wall socket and connected to the viewer before the firmware update can be performed

Firmware Update Procedure: Download the file epson13380.exe for Windows users or epson13381.dmg for Mac users from the Epson website (www.epson.com). Follow the on-screen instructions to download and extract the file onto your computer. To verify the current firmware version on your viewer: a) Power on the unit b) Select Settings from the Home screen and press OK. c) Select Device Information and use the 4 way ring to select the firmware version menu. Press OK. If you have firmware version 01.57.7431-0110-0107-0112 installed on your viewer then proceed to the next section. If you have any of the versions listed below, you must update to version 01.57.7431-0110-0107-0112 first before updating to 1.71. See bulletin PSB.2009.06.003 for more information. 01.29.6838-0108-0200-0112 01.30.7099.0108-0200-0112 01.31.7104-0108-0200-0112

Page 2 of 4

Steps: 1. Install a blank memory card into a memory card reader/writer and copy the PSV5FIRM folder (including all the files in the folder) to the root directory of the memory card. 2. Verify that the battery is installed in the P-6000 or P-7000 viewer. 3. Connect the AC adapter to the viewer, but do not power it on. 4. After the firmware file has been copied to the memory card, insert the CompactFlash or SD memory card into the viewer. 5. Press and hold down the OK and shown below. keys while sliding the POWER switch as
Warning: Do not turn off the viewer or attempt to remove the battery or disconnect the AC adapter at any time during the firmware update. When you see the EPSON logo name, release the OK and keys; the main firmware update will begin and take approximately 3.5 minutes to complete. The SubCPU firmware update starts next and takes about 3.5 minutes to complete. During the SubCPU firmware update, the blue activity LED will temporarily stop blinking; this is normal. Once the firmware update is completed you should see this screen.

Page 3 of 4

6. Power off the viewer and remove the CompactFlash or SD memory card. Then turn the viewer back on. Note: Do not press any keys when turning on the unit. 7. Set the Date and Time when prompted. 8. On the Home screen, press the Menu key. Select [Settings], then [Delete all cache files]. Press OK. If you see a dialog box prompting you to connect the AC adapter, click OK. You will then see a progress bar until the process is completed. 9. Open Settings from the Home screen and select Device Information. In Device Information select Firmware Version. The new firmware should say 01.71.7506-01100200-0112.

Note: if the version says 01.71.7506-0108-0107-0112, then you must update to version 1.57 first, then reinstall firmware 1.71. If the version says 01.71.7506-0108-0200-0112 or 01.71.7506-0107-0200-0112, you must reinstall 1.57 and then install 1.71 again.

Page 4 of 4

2/23/2009 Originator: PSB.2009.06.003 Authorization: TE08-0647 Rev. A Total Pages: Epson P-6000 and P-7000 Multimedia Photo Viewers New Firmware Release version 01.57.7431-0110-0200-0112
Description of Change: The firmware has been updated to version 01.57.7431-0110-0200-0112.
P-6000 / P-7000 Improvements: The firmware provides the following improvements and/or fixes: 1) Fixes the invalid display issue that occurs when displaying 6 megapixel RAW images in Show Processed date first mode. 2) Fixes the Backup failure issue that may occur when backing up files from a Secure Digital (SD) Memory card. 3) Disables the Key beep setting when the Power switch is set to the HOLD position. 4) Improves page switching performance when viewing images in Thumbnail view. 5) Updates Connection/Disconnection status messages when using the AC adapter to connect the P-6000 / P-7000 to a PC system.
6) Additional RAW file support. The P-6000 / P-7000 support images in RAW format with the following digital SLR cameras. The additional supported cameras and extensions are listed in blue below:

Page 1 of 4

PSB.2009.06.003
Additional RAW file support is listed in blue below:
EOS 5D, 10D, Digital Rebel, Digital Rebel XT, Digital Rebel XTi, 20D, Digital Rebel Xsi, Digital Rebel XS, 30D, 40D, R-D1, R-D1s D2X, D2Xs, D3, D60, D70, D70s, D80, D50, D40, D40X, D200, D300, D700 E-330, E-500 *istD, *istDs, *istDL, *istDs2, *istDL2, K100D, K10D, K20D, K100D Super, K200D DSLR-A100, DSLR-A200, DSLR-A300, DSLRA350
P-6000/P-7000 Firmware Update Instructions: Note: Before starting the firmware update process, confirm that there are no files on the memory card. To download and install the new firmware file, you will need the following: Windows-based PC or Macintosh computer with Internet access Operating Systems: Windows 2000/XP Home/Pro/XP/XP Pro x64 Edition/Vista Operating Systems: Macintosh OS 10.2.8 to 10.5 Memory card reader/writer 128MB or higher formatted Compact Flash or SD memory card (there must be no data on the card) P-6000/P-7000 battery installed (fully-charged battery recommended) AC adapter must be plugged in to a wall socket and connected to the viewer before the firmware update can be performed

Firmware Update Procedure: Download the file epson12939.exe for Windows users or epson12940.dmg for Mac users from the Epson website (www.epson.com). Follow the on-screen instructions to download and extract the file onto your computer. To verify the current firmware version on your viewer: a) Power on the unit b) Select Settings from the Home screen and press OK. c) Select Device Information and use the 4 way ring to select the firmware version menu. Press OK. If you see earlier versions; such as the following versions: 01.29.6838-0108-0200-0112 01.30.7099.0108-0200-0112 01.31.7104-0108-0200-0112 01.57.7431-0110-0107-0112 then proceed to the next section.
Steps: 1. Install a blank memory card into a memory card reader/writer and copy the PSV5FIRM folder (including all the files in the folder) to the root directory of the memory card. 2. Verify that the battery is installed in the P-6000 or P-7000 viewer. 3. Connect the AC adapter to the viewer, but do not power it on. 4. After the firmware file has been copied to the memory card, insert the CompactFlash or SD memory card into the viewer. 5. Press and hold down the OK and keys while sliding the POWER switch as shown below.
When you see the firmware update screen (see reference image below), release the OK and keys. Note: If you do not see this screen, power off the unit and start the firmware process again.
During the update process, the message screen will display the current firmware and updated firmware versions. Then the message Updating Resources will appear as noted in the above example.
Warning: Do not turn off the viewer or attempt to remove the battery or disconnect the
AC adapter at any time during the firmware update process. Doing so may damage the mainboard and render the unit inoperable.
6. The firmware update takes approximately 4 minutes to complete the firmware update.
7. Power off the unit and remove the CompactFlash or SD memory card.
8. Power on the viewer and verify the new firmware version. It should display: 01.57.7431-0110-0200-0112

Product Support Bulletin

12/8/2008 Originator: PSB.2009.01.001 Authorization: TE08-0448 Rev. A Total Pages: Epson P-6000 and P-7000 Multimedia Photo Viewers New Firmware Release version 01.30.7099-0108-0107-112
This bulletin was created to inform you of a firmware update for the P-6000/P-7000 multimedia photo viewers. The updated firmware provides certain improvements as outlined below.
Description of Change: The firmware has been updated to version 01.30.7099-0108-0107-112.
Reason: To provide the following fixes and/or improvements: Corrects error message Cannot use this memory card because it is damaged or not formatted
P-6000/P-7000 Firmware Update Instructions: Note: Before starting the firmware update process, confirm that there are no files on the memory card. To download and install the new firmware file, you will need the following: Windows-based PC or Macintosh computer with Internet access Operating Systems: Windows 2000/XP Home/Pro/XP/XP Pro x64 Edition/Vista Operating Systems: Macintosh OS 10.2.8 to 10.5.x Memory card reader/writer 128MB or higher formatted Compact Flash or SD memory card (there must be no data on the card) P-6000/P-7000 battery installed (fully-charged battery recommended) Page 1 of 3

PSB.2009.01.001

AC adapter must be plugged in to a wall socket and connected to the viewer before the firmware update can be performed
Firmware Update Procedure: Download the file epson12870.exe for Windows users or epson12871.dmg for Mac users from the Epson website (www.epson.com). Follow the on-screen instructions to download and extract the file onto your computer. To verify the current firmware version on your viewer, power on the unit, select Settings from the Home screen and press OK. Then select Device Information and use the 4 way ring to select the Firmware Version menu. Press OK. If you see an earlier version such as: 01.29.6838-0108-0107-0112 (P-6000) or 01.29.6838-0108-0107-0112 (P-7000) then proceed to the next section.
When you see the firmware update screen (see reference image below), release the keys. Note: If you do not see this screen, power off the unit and start the OK and firmware process again. Page 2 of 3
During the update process, the message screen will display the current firmware and updated firmware versions. Then the message Updating Resources will appear.
Important: Do not remove the battery or disconnect the AC adapter during the

firmware update process.

6. The firmware update takes about 4 minutes to complete.
8. Power on the viewer and verify the new firmware version. It should say version 01.30.7099-0108-0107-112.

Page 3 of 3

 

Technical specifications

Full description

Back up, store and view your images in vibrant color and detail, PC-free. An essential tool for on-the-go photographers, the Epson P-6000 features superior image quality and a high capacity hard drive. The perfect partner to your digital SLR camera, this innovative device makes it easier than ever to backup and view thousands of photos on the spot. Quickly store and backup images right from your memory card. Preview both RAW and JPEG images with the Photo Fine Premia LCD, exclusively from Epson. Displaying over 16.7 million colors, this 4-inch LCD encompasses 94% of the Adobe RGB color space, so you get incredible color accuracy. Zoom in to confirm focus and fine detail. Then, present your images the way they were meant to be seen - just as you captured them. With both audio and video output, it's easy to create customized slide shows to present your work wherever you go. With the Epson P-6000, you've got everything you need for all your photographic adventures.

General
Device TypeDigital AV player
Key FeaturesDigital audio player, digital photo viewer, external HDD function, memory card reader, digital video player
Width5.9 in
Depth1.3 in
Height3.5 in
Weight16 oz
PC InterfacesHi-Speed USB
Display
Display TypeTFT 4" - color
Display Form FactorBuilt-in
Display Format640 x 480
TV Standards SupportedNTSC, PAL
Memory / Storage
Flash Memory Cards SupportedCompactFlash Card type II, Memory Stick, Microdrive, MultiMediaCard, SD Memory Card, xD-Picture Card, CompactFlash Card, SDHC Memory Card
HDD Capacity80 GB
HDD Form Factor2.5" - built-in
File System SupportedFAT 32
Still Images
Supported Still Images FormatsJPEG, RAW
Digital Audio
Supported Audio FormatsAAC, MP3
Video
Video Playback FormatsMPEG-4, Motion JPEG, H.264
Connectivity
ConnectionsHeadphones - mini-phone stereo 3.5 mm Hi-Speed USB - USB Type A Hi-Speed USB - mini-USB Type B Audio / video output
Power Adapter
TypePower adapter
Power AdapterAC 110/230 V
Frequency Required50/60Hz
Battery
Rechargeable BatteryRechargeable
Battery Enclosure TypeInternal
TechnologyLithium ion
Capacity2600 mAh
System Requirements
Operating SystemMS Windows XP, Apple Mac OS X 10.3, MS Windows 2000 SP3 or later, Apple Mac OS X 10.4, Apple Mac OS X 10.5, MS Windows Vista
Miscellaneous
Direct Printing SpecificationsPictBridge
Included AccessoriesWrist strap, USB cable, carrying case
Compliant StandardsCSA, CISPR 22 Class B, FCC Part 15 B
Manufacturer Warranty
Service & Support1 year warranty
Service & Support DetailsLimited warranty - 1 year
Universal Product Identifiers
BrandEpson
Part NumberB31B191002
GTIN00010343866812

 

Tags

PV-GS65 42LF76 JV5-160S Hoist DVR-610 TCE7224 Media 4800 MX-16 4TS640A DTH252E Aspire 9500 VPL-FX52L Color 740BF KD-LH3101 DV381 Coffee BAR Protege M400 MVX150I LX600-01 TS0GSJ25b-S CLT-9960 Nocturne Triax 10 VGN-FW31ZJ Motif6-motif7-motif8 Inspiron 9300 N2610 PM1800 Zanussi F555 EL-6690 248-2 Pathfinder-2005 VSX-520 Nokia 110T 420 GPS STA-2400 MHC-GT222 32LG5000 AEU Craftsman 1738 MT 975 Motorola V635 STR-DE585 GA-MA69gm-s2H KIP713W DA4002 DVD-LS82 RA-1312 Travelmate 720 Gzmg21US-GZ-mg21 14-125 CIT Gioconda TDA-7659R SR-L3928B FS726TP Optio L30 MC-CG381 Dreamweaver Minimoys Converter Alive-talking DTH6300F CS 2159 Denon S-81 Software Removal Tool VC-C50i-vc-c50IR Fantasy 2000 Controller Jimmy 1999 Awyahdc SX110 IS 3KF4830N Futaba 3PM GR-D70 Iriver T20 Manual HP 610 Spectra 1689 Explorer 242 DCS4610 EB-X701 Nokia 6103 KV-EF34m90 Interieure Centauri PDP2335 Minish CAP TH-37PE50B Urc-6210 MA-EF303hs-U Multimedia Storage Viewer Europe MTA4 S28 SHR-6042P 19PFL4322 37GT-25H 5090 0 L-140 Firmware Kyocera 2035 7000-S P4C800 RC

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101