15.25 cm

Acoustasonic Jr DSP
Feedback notch and phase reverse feedback controls Stereo effects loop jacks Balanced line-out jack Footswitch (optional) for remote on/off switching of DSP effects
Your new Acoustasonic Junior DSP amplifier delivers world-class Fender tone and world-standard Fender quality: 40 Watts x 2 (80W total) output power 16 DSP stereo effects per channel Independent channels voiced specifically for acoustic instruments and for vocals Exclusive String Dynamics control allows attenuation of the high-frequency harshness characteristic of acoustic instruments
Thank you for choosing Fender
The W orlds most popular orlds amplifierssince 1946

instr ument

Front Panel
CHORUS +DLY REVERB +CH DELAY REVERB +DLY PLATE ROOM CHORUS ROOM HALL CHORUS +DLY REVERB +CH DELAY REVERB +DLY PLATE

CHORUS

INSTRUMENT VOLUME

TREBLE

FEEDBACK NOTCH

STRING DYNAMICS

VIBRATONE

FX SELECT

FX LEVEL

LINE /INST.

VOLUME
A. INSTRUMENT - Plug your acoustic guitar in here. B. VOLUME - Adjusts the loudness of the Instrument channel. C. PHASE - Reverses the phase of the Instrument channel which may reduce feedback in some situations. D. TREBLE/MID/BASS - Adjusts the tone of the Instrument channel in the high-, middle-, and lowfrequency bands respectively. E. FEEDBACK NOTCH - Rotate slowly to locate and suppress feedback at a specific frequency on the Instrument channel. Set to 1 when not needed. F. STRING DYNAMICS - Controls a dynamic tone shaping filter on the Instrument channel. Rotating clockwise reduces the high-frequency harshness of peak playing intensities or high volume settings while maintaining crispness when playing more gently. G. FX SELECT - Selects one of 16 DSP effects for the Instrument channel (see DSP Effects on page 7). H. FX LEVEL - Adjusts the level of the selected DSP effect for the Instrument channel. I. MIC - Balanced XLR input jack intended for a lowimpedance microphone.
J. LINE - Input jack intended for a high-impedance microphone, drum machine or keyboards. Accepts unbalanced (TS) or balanced (TRS) inputs. K. VOLUME - Adjusts the loudness of the Mic/Line channel. L. PHASE - Reverses the phase of the Mic/Line channel which may reduce feedback in some situations. M. TREBLE/BASS - Adjusts the tone of the Mic/Line channel in the high- and low-frequency bands respectively. N. FX SELECT - Selects one of 16 DSP effects for the Mic/Line channel (see DSP Effects on page 7). O. FX LEVEL - Adjusts the level of the selected DSP effect for the Mic/Line channel. P. POWER - Switches the amplifier on and off as indicated by the power ON LED. Q. IEC SOCKET (rear panel) INPUT POWER Connect the supplied power V Hz cord to a grounded AC 270W receptacle in compliance with the voltage and frequency ratings specified on the rear panel of your amplifier.

w w w.f e n d e r.com

w w w. m r g e a r h e a d.net

Rear Panel

WARNING:
MAINTAIN 6" CLEARANCE FOR VENTILATION.

LEFT RIGHT GROUND

RETURN / PWR AMP IN SEND / PREAMP OUT

FOOTSWITCH

GROUND LIFT

BALANCED LINE OUT

STEREO FX LOOP
R. FOOTSWITCH - Connect the footswitch (optional) to enable remote on/off switching of the DSP effects. S. GROUND LIFT - Disconnects the LINE OUT {T} ground connection (pin-1) which may reduce line noise in some situations. T. LINE OUT - Balanced XLR jack for output to sound reinforcement and recording equipment. U. LEVEL - Adjusts the output level of the LINE OUT jack {T}.
V. STEREO FX LOOP (RETURN/SEND) - (1) Effects Loop - Connect SEND to your stereo effects input and the effects device output to RETURN. (2) Multiple Amps - Connect primary unit SEND to auxiliary unit RETURN. The primary unit is used to control all auxiliary units. (3) Recording or Reinforcement - Connect SEND to the stereo input of sound equipment. Use TRS plugs (Tip=left channel, Ring=right channel, Sleeve=ground). The SEND signal includes onboard tone shaping and DSP effects processing.

Ring = Right Tip = Left

DSP Effects Instrument Channel
Select from 16 variations of 9 types of effects using the FX SELECT knob. Variations are defined below going clockwise around the knob.
Vibratone 1 Vibratone 2 Chorus 1 Chorus 2 Reverb + Chorus 1 Reverb + Chorus 2 Chorus + Delay Delay 1 Delay 2 Delay 3 Reverb + Delay 1 Reverb + Delay 2 Plate Reverb Room Reverb Hall Reverb 1 Hall Reverb 2 slow fast slow fast large room / slow chorus medium hall / fast chorus fast chorus / long delay (480 ms) slapback delay (140 ms) medium delay (315 ms) long delay (480 ms) medium hall / medium delay (235 ms) medium hall / long delay (415 ms) studio plate medium room medium hall large hall Vibratone Chorus Reverb + Chorus 1 Reverb + Chorus 2 Chorus + Delay Delay 1 Delay 2 Delay 3 Reverb + Delay 1 Reverb + Delay 2 Plate Reverb Room Reverb 1 Room Reverb 2 Hall Reverb 1 Hall Reverb 2 Hall Reverb 3

Mic/Line Channel

fast slow large room / slow chorus medium hall / fast chorus fast chorus / long delay (480 ms) slapback delay (140 ms) medium delay (315 ms) long delay (480 ms) medium hall / medium delay (235 ms) medium hall / long delay (415 ms) studio plate dark medium room bright medium room small hall medium hall large hall

Specifications

TYPE: PART NUMBER: PR (120V, 60Hz) US 2213204010 (230V, 50Hz) UK 2213207010 (100V, 50/60Hz) JPN 270W 40W R.M.S. per channel, (80W Total) into 8 @ <.07% T.H.D., both channels driven 10M (Inst), Treble: +/-15dB @ 15kHz -10dB from 80Hz to 7000Hz (Inst) 0 to -15dB @ 6.3kHz (Inst) +15V DC (Mic) 2-button, effects on/off (062206) Height: 15.5 in (39 cm) 43 lb (19.5 kg) Product specifications are subject to change without notice. w w w.f e n d e r.com Width: 22.4 in (57 cm) Depth: 10.2 in (26 cm) 3.6k (Mic), Mid: +/-12dB @ 1kHz 36.4k (Line/Inst) Bass: +/-12dB @ 100Hz POWER OUTPUT: INPUT IMPEDANCE: TONE CONTROLS: FEEDBACK NOTCH: STRING DYNAMICS: PHANTOM VOLTAGE: 2213201010 (110V, 60Hz) TW 2213205010 (220V, 50Hz) ARG 2213203010 (240V, 50Hz) AUS 2213206010 (230V, 50Hz) EUR

LEISTUNGSANFORDERUNGEN: ENDSTUFE: VORVERSTRKER:
LAUTSPRECHER-ERGNZUNG: FUSSSCHALTER (FAKULTATIV): ABMESSUNGEN: GEWICHT

Ein Piezo-Horn (049260)

CHORUS +DLY REVERB +CH
DELAY REVERB +DLY PLATE ROOM CHORUS CHORUS +DLY REVERB +CH
DELAY REVERB +DLY PLATE ROOM HALL
A PRODUCT OF: FENDER MUSICAL INSTRUMENTS CORP. CORONA, CA USA Acoustasonic is a trademark and Fender is a registered trademark of FMIC. Other trademarks are property of their respective owners. Copyright 2003 FMIC

P/N 063684