2009 Product Line

World record SPL holders and SQ competitors alike choose our Ultra D-Class Generation XXV series amplifiers because of their high performance, sound quality and shear raw power plus theyve been known to break records (and a few windshields at that). This year, Hifonics continues to set the stage in accuracy and brute SPL strength with a line up of Ultra D-Class amplifiers with features not available in any other product. These extraordinary amplifiers have a built-in diagnostic mode that will detect shorted speaker leads, low impedance, dangerous high temperatures and DC shorts. If detected, the amplifier will automatically shut down to help prevent serious damage. The Clipping LED indicator, located on the amplifier end panel and bass remote control, illuminates to alert when the amp reaches soft clipping, pre-clipping and full clipping, allowing for correctable action of the settings prior to reaching hard clipping and the amp shutting down. Look to the four models of the Generation XXV series for incredible unmatched kilowatt Power From the Gods, low impedance load stability and truly, the most powerful amplifiers on the planet. Features Ultra D-Class Chip Set topography increases efficiency to reduce battery current consumption which results in more watts per dollar with less power wasted as heat 18-volt stable technology increases power more then 35% over standard 14-volt battery input High Speed Ultra-Fi MOSFET output devices (see page 6) for durability Parametric Bass-EQ including adjustable narrow/wide bandwidth, bass boost from 0db to 10dB, frequency control from 30Hz to 100Hz Variable Low Pass, Subsonic Filter, Phase Shift and Level Control Balanced line input for MX accessories and line drivers Clipping indicators including Pre-Clip, Soft-Clip and Full-Clip Bass remote with built-in clipping indicators
X X V G ol i at h D-Class - 1 x 1800 @ 4 OHMS - 1 x 3200 @ 2 OHMS - 1 x 5000 @ 1 OHM L25.6 x W11.8 x H2.7
XXV Sampson D-Class - 1 x 2600 @ 4 OHMS - 1 x 4500 @ 2 OHMS - 1 x 8000 @ 1 OHM L37.8 x W11.8 x H2.7
Link & Sync feature allows the mono amps to be strapped or bridged via master/ slave configuration Ultra D-Class Ultra D-Class is the nerve center of Hifonics Generation XXV amplifiers. Our exclusive Ultra D-Class design relies on super highspeed microprocessors with proprietary D/A conversion algorithms to efficiently control the amplifiers current consumption. At very high listening levels, Hifonics Ultra D-Class results in lower distortion, higher current efficiencies and less heat than conventional D-Class designs. Ampere for ampere, watt for watt, Ultra D-Class makes it easier on a cars charging system when compared to the competition. The result is a power-to-cost-to-value ratio that cant be beat. 2 - Amplifiers Note: Goliath, Sampson and Maxximus are 18 volt stable.
XXV Maxximus D-Class - 2 x 2000 @ 4 OHMS - 2 x 3500 @ 2 OHMS - 2 x 5000 @ 1 OHM - 1 x 7000 BR I D G E D MONO @ 4 OH MS - 1 x 10,000 BRIDGED MONO @ 2 OHMS L25.6 x W11.8 x H5.3

Amplifiers - 3

2- Channel
Built-in system diagnostics protects from short circuits, over load, thermal over-heat and DC offset

1 - Channel

Amplifiers

Generation Power

XXV Colossus D-Class - 2 x 600 @ 4 OHMS - 2 x 1100 @ 2 OHMS - 2 x 1600 @ 1 OHM - 1 x 2200 BRIDGED MONO @ 4 OHMS - 1 x 3200 BRIDGED MONO @ 2 OHMS L21.3 x W11.8 x H2.7

The King of D-Class

Brutus BXI amplifiers are recognized the world over as some of the best subwoofer amplifiers in their class. For SPL, the Super D-Class featured in Brutus amps is certain to satisfy. Hifonics has perfected Super D-Class digital chip-set technology to provide an extremely efficient, low temperature, high amplification system that others only dream about. The result is a smooth digital to analog conversion with low distortion, even at high listening levels. This new Brutus line up is Hifonics most versatile yet, offering more D-Class units than any other. Plus, these Brutus amps not only sound great, they look great with an extruded aluminum chassis and an illuminated Hifonics logo. All are 1-Ohm stable, but also run at 4- or 2-Ohms for a much tighter bass response. Simply put, watt for watt, a Brutus amplifier produces more output with less impact on a cars battery and charging system, than other amps available today. Translated into cost, thats more wattage output with less battery current used to equaling more watts per dollar.

BXI610 A/B Class - 1 x 150 @ 4 OHMS - 1 x 300 @ 2 OHMS - 1 x 600 @ 1 OHM L9.84 x W9.45 x H2.52
Features Bass EQ with 45Hz bass boost and variable control from 0db to 10db Variable Low Pass, Subsonic Filter, Phase Shift and Level Control Balanced line input for MX accessories and line drivers (except BXI610) Bass remote included Built-In System Diagnostics protect from short circuits, over load, thermal overheat and DC Offset. Link & Sync feature allows the mono amps to be strapped or bridged via master/slave configuration (BXI2610D only)
BXI1210D Super D-Class - 1 x 450 @ 4 OHMS - 1 x 900 @ 2 OHMS - 1 x 1200 @ 1 OHM L11.42 x W9.45 x H2.52
BXI1610D Super D-Class - 1 x 550 @ 4 OHMS - 1 x 1100 @ 2 OHMS - 1 x 1600 @ 1 OHM L14.17 x W9.45 x H2.52
BXI2010D Super D-Class - 1 x 650 @ 4 OHMS - 1 x 1300 @ 2 OHMS - 1 x 2000 @ 1 OHM L14.97 x W9.45 x H2.52
Super D-Class Hifonics exclusive Super D-Class grade microprocessors rely on a super-speed enhanced chip-set to produce higher current capacities and more precise digital to analog conversion. The result is very low distortion, even at high listening levels. Super D-Class possesses a significantly greater efficiency rating than analog and lesser D-Class designs found elsewhere. 4 - Amplifiers
BXI2610D Super D-Class - 1 x 850 @ 4 OHMS - 1 x 1700 @ 2 OHMS - 1 x 2600 @ 1 OHM L17.72 x W9.45 x H2.52

Amplifiers - 5

The legend lives on with pure audio amplifier technology and outstanding performance in this years line up of Zeus amplifiers. Time-tested A/B designs assure sonically superior sound and offer incredible flexibility in creating the ultimate, unique sound system. Aesthetically coordinating to the Brutus line, the enhanced A/B performance continues this Hifonics tradition. The Zeus series offers the perfect soundstage amplifier for a Brutus mono amplifier with matching Hifonics illuminating blue logos. Zeus amplifiers utilize the latest in Hifonics technology of Ultra-Fi MOSFET output devices, responsible for decreasing distortion and producing high fidelity. This outstanding line is available in 2-Ohm stereo stable and 4-Ohm mono stable. Multi channel amplifiers are 2-, 4- and 5-channel. Its easy to show off individuality and create one-of-a-kind systems with the limitless applications Zeus amps offer. Combine with a Brutus BXI Super D-Class series mono amp for the subwoofer and the result is astounding ground pounding performance. Or, build a system with just Zeus amplifiers for super clean analog sound.
ZXI1010 A/B Class - 2 x 250 @ 4 OHMS - 2 x 500 @ 2 OHMS - 1 x 1000 @ 4 OHMS L15.75 x W9.45 x H2.56

Bass EQ with 45Hz bass boost and variable control from 0db to 10db Variable Low Pass, High Pass/Sub sonic Filter, and Level Control Crossover Selector for easy High Pass, Full Range or Low Pass operation Bass remote included (ZXI6010, ZXI1010 and ZXI8010 only) Built-in system diagnostics protects from short circuits, over load, thermal over-heat and DC offset
ZXI6410 A/B Class - 4 x 85 @ 4 OHMS - 4 x 170 @ 2 OHMS - 2 x 340 @ 4 OHMS L13.78 x W9.45 x H2.56
Ultra-Fi MOSFET Hifonics distinctive Ultra-Fi outputs boost the amplifiers performance by lowering THD and noise and increasing transient response with faster slew rates. The Zeus differential inputs combat electrical interference and noise at the pre-amp sections RCA inputs. As a result, this high-speed Ultra-Fi circuitry delivers the cleanest and widest bandwidth possible in a mobile amplifier system. 6 - Amplifiers

Amplifiers - 7

5- Channel
ZXI8010 A/B Class - 4 x 55 + 1 x 0 @ 4 OH MS - 4 x 110 + 1 x 0 @ 2 OH MS L15.98 x W9.45 x H2.56

4- Channel

Features
ZXI4410 A/B Class - 4 x 55 @ 4 OHMS - 4 x 110 @ 2 OHMS - 2 x 220 @ 4 OHMS L12.6 x W9.45 x H2.56

Endless Options

ZXI6010 A/B Class - 2 x 150 @ 4 OHMS - 2 x 300 @ 2 OHMS - 1 x 600 @ 4 OHMS L13.78 x W9.45 x H2.56
The trusted Titan series provides an A/B mono block, two 2-channels and two 4-channels. Hifonics has created this line of auto sound amplifiers with brutal strength, conquering performance and high affordability. The integrated and fully adjustable electronic crossovers makes balancing the acoustics between the vehicles interior, the subwoofers, component speakers and existing OEM speakers an easy task. Plus, the illuminated Hifonics logo looks great in any car. Features A/B-Class 1, 2 and 4-channel sound quality designs Bridgeable 2 and 4-channel amps with active crossovers Remote bass control with mono amps Hi-efficiency cool-running A/B-Class 1-channel subwoofer amps with active low pass crossovers Twin-turbo MOSFET exponential vari-power supply high-current power supplies Hardened high-speed MOSFET outputs Soft-start amp turn-on thump prevention Daisy-chaining RCA line-outs for multiple amplifier systems Rugged 4-gauge power connectors
TXI6008 A/B Class - 2 x 150 @ 4 OHMS - 2 x 300 @ 2 OHMS - 1 x 600 @ 4 OHMS L13.78 x W9.07 x H2.36
TXI4408 A/B Class - 4 x 55 @ 4 OHMS - 4 x 110 @ 2 OHMS - 2 x 220 @ 4 OHMS L11.81 x W9.07 x H2.36

TXI6408 A/B Class - 4 x 85 @ 4 OHMS - 4 x 170 @ 2 OHMS - 2 x 340 @ 4 OHMS L13.78 x W9.07 x H2.36
In addition, Hifonics utilizes sealed precision potentiometers to fine tune the internal system. The use of smooth gain pots with detent assures that the installation is exactly how it is wanted. 8 - Amplifiers

Amplifiers - 9

Fully-Adjustable Crossovers Back in the 80s, Hifonics was the first to incorporate a crossover in a mobile audio amplifier. Since then, Hifonics engineers have been painstakingly perfecting and emphasizing the use of exacting frequency crossovers. The result is a unique design that allows versatility and precision adjustment of all crossover points such as High Pass, Low Pass, Band Pass, Subsonic, Bass EQ and Phase Shift. The inclusion of this technology produces amplifiers with sonic accuracy, coupled with total system control and high SPL.
TXI7508 A/B Class - 1 x 250 @ 4 OHMS - 1 x 500 @ 2 OHMS - 1 x 750 @ 1 OHMS L16.93 x W9.07 x H2.36

4 - Channel

2 - Channel

High-Level Performance

TXI4008 A/B Class - 2 x 100 @ 4 OHMS - 2 x 200 @ 2 OHMS - 1 x 400 @ 4 OHMS L7.1 x W9.07 x H2.36

Subwoofers

Award Winning Series
High Power & Performance
Whether you are looking for high SPL or incredible SQ, the Olympus series of subwoofers provides the answer. These subs were designed from the ground up catering to the needs of audio enthusiasts looking to push systems to the limit. Hifonics Power from the Gods infamous motto is evident in these subs with 3 voice coils for high power handling, large double-stacked magnets for increased motor strength and 1 high roll surround for increased excursion.
Atlas subwoofers are all about high-power handling and great sound quality, but with outstanding cosmetic appeal, this series is now an incredible choice both visually and performance-wise. Atlas subs offer a variety of dual 2-Ohm or dual 4-Ohm voice-coil models that provide multiple wiring possibilities for todays high performance amplifiers. For big amp power and earth-shaking bass with a space saving feature, only the Hifonics Atlas Square subwoofer will do. This impressive 12 model provides the ability to handle 900 watts RMS and 1800 watt peaks due to its unique motor structure and 3 voice coil for better power handling with glass fiber former and aluminum cone neck reinforcement. Plus, the Atlas Square has the same 180 oz. energy magnet that is found in big, bad SPL models. Make no mistake, the Atlas series is designed for high power handling and high performance sound quality. Features Polypropylene cone with woven honeycomb structured support body 1 tall rubber surround for big excursion 2.5 DVC 2- or 4-Ohm voice coils on all round models 3 DVC 4-Ohm on the square 140 oz. magnet on the rounds 180 oz. on the square Ported nickel-plated back plate provides heat dissipation Injection molded cone neck support Single flat conex spider with woven tinsel leads

Features 12- and 15-inch DVC models Designed for ported enclosures 1- or 4-Ohm operation 76mm dual 2-Ohm + 2-Ohm voice-coil 1600 series 160 oz. high-energy magnet 2400 series 180 oz. high-energy magnet Fiber-glass infused FEA structured cone Die-cast aluminum chrome speaker frame Multi-layer high-temp voice coil Front-plate and voice-coil cooling Double-laminated integrated spider tinsel-lead design 25.4mm / 1 hi-excursion surround Push and insert wire terminals
Model OLM1612 OLM1615 OLM2412 OLM2415

SIZE 12 15

MAXX Power 3200 Watts 3200 Watts 4800 Watts 4800 Watts
RMS Power 1600 Watts 1600 Watts 2400 Watts 2400 Watts
DVC Imp/Ohms 2+2 2+2 2+2 2+2
Model ATL12D4 ATL12D2 ATL12SQD4

SQUARE

SIZE 12
MAXX Power 1200 Watts 1200 Watts 1800 Watts
RMS Power 600 Watts 600 Watts 900 Watts

DVC Imp/Ohms 4+4 2+2 4+4

If you like it loud and proud, this is your woofer. Its got all the chrome, all the bling of the pretty woofers, but when it comes time to drop the knob, youll have a woofer that will more than hold its own against the posers. The Hifonics Olympus 2412 will handle ungodly amounts of power and abuse, and deliver the authority you need for serious street cred,- Performance Auto and Sound Magazine. 10 - Subwoofers
Impedance Control Both round and square Atlas subs have unique speaker terminal connection points with bridging clips that can be repositioned to control parallel or series wiring. This unique feature reduces the number of wires that need to go to the subwoofer and offers many alternatives for wiring. Less wires, less confusion. Subwoofers - 11
Efficiency & Flexibility

Increased SPL

Redesigned for this year, Brutus continues to reign as one of the most efficient subwoofers in its class and provides just what is needed when peaking power reaches the MAXX! Hard pounding Brutus subs feature incredible bass performance and power handling with nickel-plated high flux-return ported back plates capping massive 100-oz. magnets. Engineered to handle extreme levels of mechanical and thermal stresses, Hifonics Brutus subwoofers utilize heat-dissipating black stamped frames to hold together the high power magnets and new ultra-rigid polypropylene cones. Brutus subs are available in dual 2-Ohm and dual 4-Ohm configurations offering the utmost flexibility. They are ideal for ported or sealed enclosures depending on the desire for crazy lows or accurate tight bass. The new blue stitched surround completes a great look. Features Polypropylene cone with woven honeycomb structured support body Blue stitched rubber surround for big excursion DVC 2-or 4-Ohm 2.5 voice coil on a glass fiber former 100 oz. magnet Ported nickel-plated back plate Injection molded cone neck support Single flat Nomex spider with woven tinsel leads

The square shape of the woofer allows for a cone area 21.5% larger than a normal 12-inch round woofertranslating into greater output Performance Auto and Sound Magazine.
Zeus subs are renowned for producing the most efficient and loudest performance in their class. This year, Hifonics has taken a radical approach to the standard spider design resulting in a line up of Zeus subwoofers with increased output SPL and durability. With great looking cosmetics, featuring a one-piece cone and dust cap, accurate bass reproduction through a wide range of frequencies and impressive power handling capabilities, this should be Zeus best year ever. The traditional spider design was challenged, and through extensive testing, Hifonics engineers separated the two spiders and determined the ideal distance and position to produce maximum excursion outward and inward, while maintaining optimal control. This powerful line is available in five models in dual-voice coil 2-Ohm, 4-Ohm in 10- and 12-inch round profiles and a 12-inch round singlevoice coil 4-Ohm. The new Zeus series of subs are designed for sealed and ported enclosures both maximizing efficiency to produce even greater sound. Features Rubber surround for long excursion Polypropylene cone and nickel-plated push and insert speaker terminals keep the amps energy focused within the speakers core Heat-dispersing ported nickel-plated back plate Ultra-rigid stamped steel basket and protective rubber magnet wrap
Model B12D2 B12D4 B15D2 B10SQD4 B12SQD4

size 12

MAXX Power 1200 Watts 1200 Watts 1400 watts 1000 Watts 1200 Watts
RMS Power 600 Watts 600 Watts 700 watts 500 Watts 600 Watts
DVC Imp/Ohms 2+2 4++2 4+4 4+4
Square vs. Round Square designs offer more cone area for moving air for higher SPL. They are ideal when space becomes a challenge in the confines of a car something Hifonics refers to as, More Bass in Less Space. Square Brutus subwoofers utilize Hifonics unique rubber surround design, which addresses the non-linear cone behavior of a square coned low-frequency bass driver. The special ribs formed into the rubber surround at the corners prevent the surround from bending or folding while the cone travels up and down, adding improved sound quality. 12 - Subwoofers

Model ZX10D2 ZX10D4 ZX12S4 ZX12D2 ZX12D4
MAXX Power 900 Watts 900 Watts 1000 Watts 1000 Watts 1000 Watts
RMS Power 450 Watts 450 Watts 500 Watts 500 Watts 500 Watts
DVC Imp/Ohms 2+2 4+4 4+4 2+2 4+4

Subwoofers - 13

Dare to Compare

Speakers

Why Change a Good Thing
Hifonics cant help but make great looking and amazing sounding subs and the HF series is proof. This entry level series is ideal for those looking for extreme power, without an extreme budget. With great features found in higher-end units, its no wonder that this is our number one all time selling line of subs! Features 12-inch DVC and SVC High-energy magnet Black polypropylene cone Poly-mica cone damping Chrome speaker frame Multi-layer high-temp voice coil Front-plate and voice-coil cooling Integrated spider tinsel-lead design High-excursion rubber surround High-strength suspension material Push and insert wire terminals Anti-resonant rubber magnet boot
The all-powerful Hifonics Gods combined their collective powers to create our all time leading selling speakers in just the right configurations with just the right amount of power. One reason for their immense popularity is because the Zeus ZXI low-profile MaxxFitt speaker series cures the limited-depth speaker-fit problems found in OEM applications. The other reason is that they sound great. Designed for superior sound stage, Zeus speakers use the latest in titanium and ceramic cone materials and engineering to provide a state-of-the-art speaker. The Hifonics Noedyminium Silk Dome Tweeter provides smooth frequency response up to 25,000Hz that is perfect for the exacting audio enthusiast or the mobile video-phile. Completing the series is a bright blue LED feature that illuminates when the speakers are on. Appropriately named Sound Light, the Hifonics logo vibrantly appears on certain models by means of illuminating back lights. On component speakers, the speaker dust cap illuminates the logo. MaxxFitt An overwhelming 90% of OEM speaker applications are covered by the limited-depth speaker problems today. Zeus speakers with MaxxFitt are the answer to the commonly asked question, What speakers fit a shallow depth opening but still sound incredible? Features Low-profile anti-resonant MaxxFitt titanium chromed speaker frames Multi-mount component tweeters Flush, surface and angle mountable Sound Light speaker illumination technology 12mm neodymium silk dome tweeters Ceramic titanium composite cones Weather-resistant butyl rubber surrounds 360 radial-cooled motor structure

Model hfi12d4 hfi12s4

size 12 12
MAXX Power 600 Watts 600 Watts
RMS Power 300 Watts 300 Watts

DVC Imp/Ohms 4+4 4

Swiveling tweeter elements
Power From the Gods Hifonics subwoofers offer phenomenal performance at moderate power levels, making them ideal for those seeking sound quality and a solid impact from compact enclosures. They are designed for enhanced thermal dissipation, more power handling, long excursion capability and highly optimized motor/suspension systems that ensure clean, articulate bass reproduction with impressive low frequency extension. Conquering power, unsurpassed performance and dependable reliability that is second to none. Thats Hifonics Power From the Gods.
Model Size zxi52CX 5.25 zxi63 6.5 zxi683 6x8 / 5x7 zxi693 6x9 zxi5.2C 5.25 zxi6.5c 6.5
Type 2-way 3-way 3-way 3-way Comp Set Comp Set
Power Rating 30-65 Watts 30-75 Watts 30-85 Watts 30-110 Watts 30-90 Watts 30-100 Watts
Maxx Power 325 Watts 375 Watts 425 Watts 550 Watts 450 Watts 500 Watts
Frequency 61Hz-23kHz 56Hz-24kHz 43Hz-24kHz 43Hz-24kHz 61Hz-25kHz 56Hz-25kHz

14 - Subwoofers

Speakers - 15
Features 8.5-volt line drive Select 2- or 4-channel inputs with input switch Direct sub-in receivers with sub-outs 0 12dB bass boost at bass remote Maximum pre-amp output: 8.5-volts RMS 45Hz bass boost with quasi-parametric EQ Selectable for mono or stereo woofers 180 phase-shift switch Second order Butterworth front and rear channel high-pass Level adjustments for front, rear and sub channels 2-channel full-range RCA preamp Cascading output
Universal Link & Sync
MAXX-Link is a chrome-finished universal amplifier bridging and synchronization module that permits interconnectivity, or linking, up to five amplifier pairs into a master and slave configuration. It is ideal for linking a pair of amps together to create one enormous subwoofer amplifier output channel. A remote-mounted level control provides amp clipping indicators in addition to being a master gain device for the whole array of amplifiers. MAXX-Links ability to synchronize multiple mono-block car audio amplifiers into a larger output, single-channel amp array opens up a new field of car audio system creativity for the enthusiast.

2/3 way crossover

mlx-100
Features 1/2 DIN Four Band Equalizer Allows interconnectivity / linking mobile amplifiers into a master and slave configuration Link up to five (5) amplifier pairs Variable wide / narrow bandwidth control 2-audio inputs with level matching Selectable 12dB high-pass front / rear crossover Selectable 12dB low-pass sub output Selectable for mono or stereo Remote level control with LED clipping indicator Built-in line driver variable from 1-9 volts Master / Slave control switch 0 to 180 adjustable phase control 24dB adjustable low-pass (35Hz to 250Hz) 2-channel RCA audio pass-thru Built-in 6.5Hz set-up test tone Processors - 17 24dB adjustable subsonic filter (15Hz to 35 Hz) 10dB adjustable parametric bass EQ Features DIN, ISO mount chassis 4-band equalizer with +18dB variable Master volume and subwoofer volume control Front to rear dual-amp fader 16 - Processors

Maxxsonics OEM Accessories are the answer for getting more power and better sound from an existing car audio system when it is improbable, impractical and sometimes just impossible to change an aftermarket head unit. MX-1 Premium High-to-Low Level Converter Easily add an aftermarket amplifier to any OEM radio system with this superior line-level controller that converts factory high-level speaker wires into unbalanced low-level (RCA) outputs and adds multiple sound shaping controls to clean up and boost the high distortion factory outputs. Features Converts and filters high-level factory speaker wires into ultra-clean unbalanced (RCA) low-level signals to an aftermarket amplifier High Level Inputs: Accepts all types of high-level input signals including floating ground type, low and high voltage speaker wires Audio Signal Sense: Speaker audio signal detection automatically turns on the controller and the amplifier (MX-1 has both remote wire and signal sense capabilities) Parametric Bass EQ: Provides a wide array of subwoofer output signal shaping controls to enhance bass response and sound quality including Bass Boost, adjustable Bandwidth (wide and narrow), Low Pass and Subsonic Filter Clipping Indicators: Visual clipping indicators provide indication of damaging clipped signals to help protect the subwoofer and amplifier. Includes pre-clip, soft-clip as well full-clip indicators Balanced Line Driver: Ultra-clean DIN variable high-voltage output drives mono amplifiers with BLD input Remote Output: Built-in amplifier circuit activates any aftermarket +12 volt amplifier upon radio activation Bass Remote: Included bass remote featuring built-in clipping indicators allows direct bass control from in-dash or under-dash Input and Output Level Control: The system provides high level input and output level (gain) control for both full range and subwoofer signals
MX-3 Bass Controller Working in conjunction with an aftermarket radio and amplifier, the Bass Controller takes the designated radio subwoofer or full-range stereo output from the radio and processes the low frequency bass notes. In turn, this enhances the bass response, increases linearity, buffers unwanted transient noise and improves the frequency range for overall improved bass quality. Features Parametric Bass EQ: Provides a wide array of subwoofer output signal shaping controls to enhance bass response and sound quality including Bass Boost, adjustable Bandwidth (wide and narrow), Low Pass and Subsonic Filter Accepts a wide range of incoming music signal levels while accommodating all types of head units and signal processors and controlling the output level to the amp to maximize a signal strength up to 9 volts Clipping Indicators: Visual clipping indicators provide indication of damaging clipped signals to help protect the subwoofer and amplifier. Includes pre-clip, soft-clip as well full-clip indicators Shapes the music signal to achieve deep bass notes as low as 15 Hz Bass Remote: Included bass remote featuring built-in clipping indicators allows direct bass control from in-dash or under-dash

MX-2 Deluxe High-to-Low Level Converter Conveniently coverts a stock head units speaker wire signal (high level) into an RCA (low level) signal for use with an aftermarket amplifier. Features Converts and filters high-level factory speaker wires into ultra-clean unbalanced (RCA) low-level signals to an aftermarket amplifier High Level Inputs: Accepts all types of high-level input signals including floating ground type, low and high voltage speaker wires Audio Signal Sense: Speaker audio signal detection automatically turns on the Controller and the amplifier (MX-2 has both remote wire and signal sense capabilities) Remote Output: Built-in amplifier circuit activates any aftermarket +12 volt amplifier upon radio activation Input and Output Level Control: The system provides high level input and output level (gain) control for both full range and sub woofer signals 18 - Processors
MX-4 Add-A-Sub High-to-Low Level Converter This unique Controller provides the ideal way to add more bass without changing an entire OEM radio system. Features Converts and filters high-level factory speaker wires into ultra-clean unbalanced (RCA) low-level signals to an aftermarket amplifier High Level Inputs: Accepts all types of high-level input signals including floating ground type, low and high voltage speaker wires OEM high-level input voltages are adjustable from 4 volts to 40 volts Unbalanced line outputs are adjustable to the aftermarket amplifier from 4 volts to 9 volts Processors - 19
Maxxsonics USA, Inc. 1290 Ensell Road Lake Zurich Illinois 60047 USA Phone: 847-540-7700 FAXX: 847-540-9776 www.maxxsonics.com MB Quart, Autotek, Hifonics and Crunch USA are divisions of Maxxsonics USA Inc.
Visit Us On The Web @ maxxsonics.com myspace.com/maxxsonicsusa youtube.com/MaxxsonicsUSAInc
2009 Maxxsonics USA, Inc. All Rights Reserved Specifications And Designs Are Subject To Change Without Notice.