Product End-of-Life Disassembly Instructions
Product Category: Other Products Marketing Name / Model [List multiple models if applicable.] HP IPAQ DATA MESSENGER Name / Model #2 Name / Model #3 Name / Model #4 Name / Model #5 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE). 1.0 Items Requiring Selective Treatment 1.1 Items listed below are classified as requiring selective treatment. 1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable. Quantity of items Item Description Notes included in product Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA) Batteries Mercury-containing components Liquid Crystal Displays (LCD) with a surface greater than 100 sq cm Cathode Ray Tubes (CRT) Capacitors / condensers (Containing PCB/PCT) Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height External electrical cables and cords Gas Discharge Lamps Plastics containing Brominated Flame Retardants weighing > 25 grams (not including PCBs or PCAs already listed as a separate item above) Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner Components and waste containing asbestos EL-MF877-00 Template Revision B PSG instructions for this template are available at EL-MF877-01 Include the cartridges, print heads, tubes, vent chambers, and service stations. With a surface greater than 10 sq cm All types including standard alkaline and lithium coin or button style batteries For example, mercury in lamps, display backlights, scanner lamps, switches, batteries Includes background illuminated displays with gas discharge lamps 0 0

Page 1

Components, parts and materials containing refractory ceramic fibers Components, parts and materials containing radioactive substances
2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable) Phillips screwdriver Torx Screwdriver AC Adapter: Clipper Side Cutter Slotted Screw driver Tamper Star Key Wrench Description #5 3.0 Product Disassembly Process 3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment: 1. 2. 3. 4. 5. 6. 7. 8. Open handset back cover. Use Phillips screwdriver and Torx screwdriver to open it. Pull out the PCB board Pull out the QWERTY keypad. Use Phillips screwdriver to open the hinge. Pull out the hinge. Use Torx screwdriver to open the touch plane Pull out the touch plane. No.00 T5
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations).
EL-MF877-00 Template Revision B PSG instructions for this template are available at EL-MF877-01

Page 2

Page 3

ADAPTER

Page 4
Open the housing of the charger.

Take out the PCBA.

Take out the white plastic sheet.
Open the housing of the adapter.
Loosen 1 star head screw on the adapter.

Take off the terminal.

Page 5