SOUND ADVICE Vol. 8, February, 9 2007

The Isotek (Cleanline)

Now in much improved G11 guise Suitable for mid range separates systems and can be used on systems of higher caliber if the current draw is low enough. Seems expensive, but the results are quite spectacular - soundstages are transformed and expanded - top end detail sweetened up and increased and the bass end becomes tighter and faster. The Solus is our one of our entry level 6-way filters which has the option of upgrade to the more sophisticated Mini Sub. The Solus was designed to be a very rewarding single box plug-n-play solution for a complete audio or home theatre system. Using our advanced Polaris-X technology the Solus is able to draw mains contaminants away from audio components plugged into the unit. All components featured in the Solus are of the highest grade and are under stressed, this gives greater longevity, which are then hand soldered onto the PCB with silver solder.
What Hi-Fi? (October 2002) 10 Easy Ways To Upgrade Your Hi-Fi Magazine Feature "Who would have thought that mains distribution could be so sexy? There's no denying the IsoTek Cleanline is a cool-looking piece of kit." "The biggest improvement is the extra detail." "Dynamics are also greatly improved." ". the difference it makes to the sound is astonishing. And don't forget, it can also be used to improve the sound and picture quality of your TV, DVD, and VCR - in fact up to six components can benefit from this impressive piece of kit."
For any enquiries you can reach The Soundsmiths at: info@thesoundsmiths.com or call + 919323111890 Veeru + 919820252270 Amit + 919820513978 Aditya

March 2004

Multi award winning power management systems

Solus Instruction Manual

Contents

General section

A. Introduction
The company The principles The execution

A.1 A.1 A.1

B. The product

Overview Features Safety

B.2 B.2 B.3

C. Installation

Placement Equipment coupling System integration

C.3 C.3 C.3

D. Troubleshooting

Fault finding

E. Specifications

Dimensions & sockets

F. Considerations
Cabling Third party products Upgrades

F.6 F.6 F.6 G.7

G. Warranty

The company

IsoTek was formed in July 2001 with the vision to create high quality mains power distribution units that moved beyond current conventions. Through careful market analysis and extensive research we were able to launch products that moved power distribution forward to be recognised as an integral part of any audio or home theatre system. Our products continue to lead the way in power management systems, our latest GII range galvanises our commitment to pursue excellence at every level. We believe all products benefit from their own clean power supply, therefore we advocated the concept of using (smaller) individual filters on each component, with these being specifically designed for their purpose, this dramatically reduces and stops component cross contamination and dispels the belief that one size fits all. Every single component used in our designs is extensively tested for quality, reliability and purpose. Our circuit designs are extensively field tested before coming to market so we can guarantee the widest compatibility with third party products. Within the market of premium audio it is vital to offer exceptional performance and value for money. Products must be made to the highest of standards, be reliable and attractive. A manufacturer must offer exceptional service, dealer training, support and undertake the very best in promotion design and literature. If all these elements are in place customers should experience excellence at every stage. Our continual quest is to meet these challenges. All of our products are professionally designed, manufactured and hand built in the UK, with deep consideration given to both style, functionality, performance and value for money.

The principles

The execution

Overview

Thank you for purchasing our Solus. The Solus is our one of our entry level 6-way filters which has the option of upgrade to the more sophisticated GII Mini Sub. The Solus was designed to be a very rewarding single box plug-n-play solution for a complete audio or home theatre system. At the rear of the unit you will note six high quality outlets, these not only allow you to tidy up the system but provide an ideal environment for equipment to function. Through a cunning star earthed system the Solus reduces the ability of the six outlets to cross contaminate, effectively stopping components talking to each other or corrupting the clean supply provided by the unit. The full star system not only acts as a non release pressure valve for mains noise but also gives the effect of individual spurs for each piece of equipment. This is a far more desirable solution than physically changing the wiring in your home. In the interest of safety the unit should be placed upon its own dedicated shelf on an audio grade equipment rack. The unit may be placed on top of or under other pieces of equipment, do not exceed a maximum weight loading of 20kg. Do not place the Solus in areas where the temperature is likely to exceed 25 degrees. For example, close proximity to tube amplifiers.

Features

Front elevation of the unit

Safety

If you have to locate the unit on the floor we strongly recommend you do not place the unit near heat sources, such as radiators or air ducts. Good air circulation is essential to prevent heat build up within the chassis. Do not place the Solus on a soft surface, for example a rug or carpet, which could block the ventilation intakes on the underside of the unit. Do not let any liquids spill onto or objects fall into the chassis. Should either of these events happen, immediately switch off the unit at the wall socket, wait for at least one minute, unplug all other cables and return it to your authorised IsoTek dealer for a full service.
Front & rear of the unit

Placement

Laser etched product name badge Official GII laser etched badge LED indicator light
Ideally the unit should be placed upon its own dedicated shelf of an audio grade equipment rack. If this is not possible the unit may be placed on top of or under other pieces of equipment to a maximum weight limit of 20kg. Due to the products careful screening by way of a large ground plan within the unit, no adverse effects should be caused by this placement. If you have to locate the unit on the floor or in any other location please refer to the safety section of this manual. Once the Solus is placed connect the unit to a mains wall socket, we recommend that a good quality cable is used and that the wall socket is also unswitched. Turn off all equipment you wish to have a clean mains supply, unplug the cables relating to these from the wall socket or redundant distribution block you may have been using and plug these into the rear sockets of the Solus. The Solus utalises our propriatery Polaris-X technology to reduce product cross contamination but at the same time supplying a high current rating to all outlets. This is subject to the total power consumption being less than 2.4kw. We strongly recommend that a good quality mains cable is used and this cable is consistent throughout your system. Look for a cable with good conductors, for example oxygen free copper, this cable should also have a high degree of shielding from RFI.

Equipment coupling

IEC Inlet Dedicated earth post

System integration

6 high quality UK three pin outputs

Fuse location

The front panel LED is not lit and the unit gives no power. Check that the mains inlet fuse is intact, this will be located in the drawer of the IEC socket at the rear of the unit on the left hand side. If there is not a fuse located or you have used up your supply please contact us on or email support@isoteksystems.com so that we can forward you a free replacement. Check that the mains cable is securely plugged into the unit and the wall socket. Check the fuse within the plug is intact.

Fuse holder of IEC inlet

On rare occasions the fuse at the main distribution fuse box may also need to be checked.
Fuse in UK three pin plug
The following information relates only to the IsoTek Solus. These are original products and should not be confused with previous or copy cat models. Number of outlets: Type of outlets: Standard mains inlet: 6 13A UK unswitched IEC fused
Front & rear elevation
Mains voltage: 110 - 264VAC Maximum current (typical to location used) 13Amps (UK) Total maximum current 18Amps External mains fuse 6.3Amps (filter block circuit) Dimensions: Weight: 444mm x 85mm x 305mm (WxHxD) 6.0Kg
Please note, the information given in this document is correct at the time of print. Small production changes in the course of improvement through our ongoing research and development policy may arise. If clarification of any point is required please refer to your local authorised IsoTek dealer or visit www.isoteksystems.com where you can download the very latest information.

Product examples

Cabling
We strongly recommend that a good quality mains cable is used and this cable is consistent throughout your system. Look for a cable with good conductors, for example OFC (oxygen free copper). This cable should also have a high degree of shielding from RFI. Outside of the UK it is not uncommon for cables of 6Amps current capability to be connected to a 20Amp outlet. In practice this seems to be a safe arrangement. However we strongly recommend a cable of the full 20Amps carrying capability be used, with a minimum 1.5mm squared. IsoTek produce their own cable in standard 1.5M lengths. All cables feature high quality connectors, OFC conductors and fully earth shielded. This removes any chance of RFI entering the cable. Three versions are available: Premium, Elite & Super Elite. High grade Furutech connectors are used in the Elite & Super Elite designs. Our new GII range of products work well with all third party equipment including varying cable technologies. If off-the-shelf mains cables are used we recommend the use of Ferrite rings to reduce RFI. We also recommend the use of contact conditioners, for example Caig ProGold or DeoxIT. Isolation devices, feet and cones may also be used. We recommend Clearlight Audio RDC products which we use on our higher end products, for example, Titan.

IsoTek Titan

Third party products
IsoTek Elite & Super Elite Cable

Upgrades

It is possible to increase the performance of the Solus through ideal location and product placement, the use of isolation devices and contact conditioners for example. The Solus can also be used to run front-end only equipment with one of our dedicated power amplifier products. For example, the introduction of a Titan for that specific purpose. Full details can be found from your local authorised IsoTek dealer or on our web site www.isoteksystems.com