THE JBL ON TIME 200ID loudspeaker dock and clock radio is a revolution in time travel for the iPod. Imagine waking up to your favorite song stored on your iPod. No more buzzer or bad radio reception. The JBL On Time 200ID system is a compact, high-performance time machine and sound center. Connected to your newgeneration iPod, MP3 player or other music source, the JBL On Time 200ID system produces clean, powerful sound while providing time-keeping, alarm and radio features.

JBL ON TIME 200ID

HIGH-PERFORMANCE LOUDSPEAKER DOCK AND CLOCK RADIO FOR iPod

iPod not included.

COMPATIBILITY The JBL On Time 200ID loudspeaker system is compatible with all docking versions of the iPod, including the iPod touch, iPod nano (3rd generation) and iPod classic. A stereo mini jack connection also allows you to enjoy high-quality audio from a variety of other devices such as iPod shuffle, MP3 and CD players, desktop computers (all platforms), satellite radio and laptops. EASY-TO-USE TOUCH CONTROLS Just a touch increases or decreases the volume. Another touch and you choose iPod, radio or auxiliary. The JBL On Time 200ID system remembers your source and the last volume setting, even after the system shuts down. TIME AND ALARM FEATURES The JBL On Time 200ID system is a revolution in time-keeping. Imagine waking up to your favorite song stored on your iPod. The intuitive user interface allows for all functions to be programmed easily. The navigation buttons provide instant access to the menus. Navigate the intuitive menu to change settings such as language, alarms and snooze. Radio functions (e.g., channel presets) are simple. DISPLAY The large backlit LCD permits easy viewing and menu navigation. Automatic dimming sets the correct brightness level in any room environment. ADDITIONAL FEATURES
Evercharge topology The JBL On Time 200ID companion charges your iPod, even when not connected to the computer or if the system is off. Backup battery The memory is supported by a backup battery, so that even with the power out, the alarm function operates.
ADVANCED TECHNOLOGY The JBL On Time 200ID system combines many proprietary technologies to provide the highest quality sound, with astonishing bass and clear, accurate sound from any direction.
Phoenix and Ridge transducers The two aluminum-domed, full-range transducers are driven by powerful neodymium magnets. The Ridge tweeter produces accurate high frequencies. This two-way design offers a full, rich frequency response from the lowest bass to the highest highs. COE (Computer-Optimized Equalization) The JBL On Time 200ID system equalization is computer-optimized, for a rich, complete soundstage. OCT (Optimized Compression Topology) The proprietary compression technology ensures clean, accurate sound at high output levels.
DETAILED TECHNICAL SPECIFICATIONS Manufacturer: Model Name: Input Requirement: Drivers: Power: Frequency Response: Dimensions: JBL, Inc. JBL On Time 200ID Main connection docking connector for iPod Auxiliary connection 1/8" (3.5mm) stereo mini jack One Ridge neodymium and two Phoenix transducers 2 x 6 Watts 70Hz 20kHz Width 11-3/16" (284mm) Depth 5-3/4" (146mm) Height 2-3/4" (70mm) 1.8 lb (0.8kg) >5k Ohms >80dB 120V AC U.S., 100V AC Japan, 230V AC Europe
Weight: Input Impedance: Signal-to-Noise Ratio: Voltage Input:
Harman Consumer Group, Inc. 250 Crossways Park Drive, Woodbury, NY 11797 USA

www.jbl.com

2008 Harman International Industries, Incorporated. All rights reserved. JBL is a trademark of Harman International Industries, Incorporated, registered in the United States and/or other countries. JBL On Time is a trademark of Harman International Industries, Incorporated. Apple and iPod are trademarks of Apple Inc., registered in the U.S. and other countries. Shuffle is a trademark of Apple Inc. Made for iPod means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

JBL ON TIME 200ID

AM/FM RADIO AND SPEAKER DOCK FOR iPod
iPod not included/iPod non inclus

USER GUIDE

English. 2 Franais. 16 Deutsch.. 30 Italiano.. 44 Espaol.. 58 Nederlands. 72. 86 Dansk.. 100 Japanese.. 114. 128.. 142 Svenska. 156 Suomi.. 170 Norsk.. 184
0024CSK - JBLOnTime200iD v12.indd 1

04/09/08 16:26:49

IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ THE FOLLOWING PRECAUTIONS BEFORE USE:

Read these instructions, heed all warnings and keep for future reference. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings; a minimum distance of 10mm around the entire apparatus is required for sufcient ventilation. No naked ame sources, such as lighted candles, should be placed on or near the apparatus. Attention should be drawn to the environmental aspects of battery disposal. The apparatus is to be used in moderate climates only. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatuses (including ampliers) that produce heat. Protect the power cord from being walked on or pinched, particularly at the plugs and convenience receptacles, and at the point where they exit from the apparatus. Only use attachments/accessories specied by the manufacturer. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, or the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. To be completely disconnected from the power input, the main plug of the AC/DC adapter shall be disconnected from the main. The main plug of the AC/DC adapter should not be obstructed OR should be easily accessed during intended use. The marking information is located at the bottom of the apparatus. The battery shall not be exposed to excessive heat such as sunshine, re or the like. The apparatus and AC/DC adapter shall not be exposed to dripping or splashing, and no objects lled with liquids, such as vases, shall be placed on the apparatus and AC/DC adapter. TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE ARE NO USER-SERVICEABLE PARTS INSIDE THIS UNIT. PLEASE REFER SERVICING TO QUALIFIED HARMAN CONSUMER GROUP, INC., SERVICE PERSONNEL. Never remove grille covers in order to service the speaker system. The speaker system does not contain any user-serviceable parts.
IMPORTANT NOTE FOR ALL ELECTRONIC PRODUCTS:
Before inserting or unplugging audio cables from the source devices headphones or line-level output jacks, it is good practice to turn off the device rst. This will prolong the life of your unit, help protect your device from static electricity and prevent potential damage.
JBL ON TIME 200ID USER GUIDE
0024CSK - JBLOnTime200iD v12.indd 2

04/09/08 16:26:51

FCC STATEMENT AND WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Any special accessories needed for compliance must be specied in the instruction manual. MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT UNDER FCC RULES. The normal function of the product may be disturbed by strong electromagnetic interference. If so, simply reset the product to resume normal operation by following the instruction manual. In case the function could not resume, please use the product in another location.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN
THE LIGHTNING FLASH AND ARROWHEAD WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU TO DANGEROUS VOLTAGE INSIDE THE PRODUCT.
CAUTION: TO REDUCE THE RISK OF SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
THE EXCLAMATION POINT WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU TO IMPORTANT INSTRUCTIONS ACCOMPANYING THE PRODUCT.
WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: THE APPARATUS SHOULD NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUID, SUCH AS VASES, SHOULD BE PLACED ON THE APPARATUS.
IMPORTANT: THE APPROPRIATE ADAPTER MUST BE INSTALLED BEFORE INSERTING YOUR iPod INTO THE JBL PRODUCT. MAKE SURE THAT THE CONNECTOR FOR THE iPod IS PROPERLY ALIGNED WITH THE JBL PRODUCTS CONNECTOR WHEN INSTALLING YOUR iPod. FAILURE TO DO SO MAY CAUSE PERMANENT DAMAGE TO THE CONNECTOR FOR THE iPod, RENDERING THE iPod INOPERABLE.

WWW.JBL.COM

0024CSK - JBLOnTime200iD v12.indd 3

English

The JBL On Time 200ID high-performance loudspeaker dock and clock radio for iPod will revolutionize the way you listen to your radio, use your iPod, and wake from a good nights sleep. The JBL On Time 200ID system is a revolution in time travel. Imagine waking up to music on your favorite station or your iPod, with no more buzzer or bad radio reception. The compact time machine and sound center, when connected to your iPod, MP3 player or other music source, produces clean, powerful sound while providing time-keeping, alarm and radio features. The system is the worlds rst time machine with an intuitive user interface that is easier than ever to navigate. The JBL On Time 200ID loudspeaker dock has full ability to navigate your iPod via IR remote. Also, not only can you wake up to your favorite radio station or song on your iPod, but with the multiple alarm setting option, you can set up to seven different alarms for His and Hers, at whatever day or frequency needed. ONEPOINT DESIGN The OnePoint connectors provide the connection to your computer. Connect the standard cable for iPod to the rear of the JBL On Time 200ID unit, and every time you dock your iPod, youll have a connection for synchronizing. EVERCHARGE TOPOLOGY The JBL On Time 200ID speaker dock charges your iPod, even when its not connected to the computer or the system is off. The systems memory is maintained by a backup battery. Even with the power out, it will provide the alarm function. COE (COMPUTER-OPTIMIZED EQUALIZATION) The JBL On Time 200ID system equalization is computer-optimized to provide a rich, complete soundstage. OCT (OPTIMIZED COMPRESSION TOPOLOGY) The JBL On Time 200ID radio and loudspeaker dock utilizes a proprietary compression technology to ensure clean, accurate sound at high output levels. DISPLAY The large, backlit LCD enables easy viewing and menu navigation. Automatic dimming sets the correct brightness level in any room environment.

0024CSK - JBLOnTime200iD v12.indd 4
UNPACKING YOUR JBL ON TIME 200ID
Carefully unpack your speaker system and identify all its components: IR remote FM antenna

JBL On Time 200ID

Adapters for iPod

Power supply

Audio cable

AM antenna

QUICK SETUP INSTRUCTIONS
Choose the appropriate adapter for iPod and place it into the docking station. Then place your iPod into the adapter. For backup memory, install three AAA batteries in the battery compartment underneath the unit. Connect the external AM antenna for better reception. Unwind the FM antenna and straighten the wire for the best reception. Plug the power adapter into the DC In jack and then plug the adapter into a wall outlet. If an additional audio source is used, connect the source to the Aux In jack.
FM ANT AM ANT AUX-IN USB DC 15V

AAA AAA

Aux In

FM ANT

AM ANT

AUX-IN

DC 15V
0024CSK - JBLOnTime200iD v12.indd 5

CONTROLS

Setting the Clock
1. Press Menu/Up Level at any screen to display Top Menu (may require repeated presses, depending on which menu state the unit was previously in). 2. Use Up/Down arrows to highlight Clock. Press Enter to conrm. 3. Use Up/Down arrows to highlight 12-hour or 24-hour format. Press Enter to conrm. 4. Use Up/Down arrows to set Hour. Press Enter to conrm. Minute eld becomes highlighted. 5. Use Up/Down arrows to set Minutes. Press Enter to conrm. AM/PM eld becomes highlighted. 6. Use Up/Down arrows to set Day of Week. Press Enter to conrm. The clock is set!
Note: During clock-setting, if there is no user input for 2 seconds, display will return to the Now Playing screen. Press any one of the Enter, Up/Down arrows, or Menu/Up Level to return to setting selection.

Base Unit Control

Navigation

Select Up

Volume Down

Volume Up

Source

Menu/Up Level

Preset

Select Down

0024CSK - JBLOnTime200iD v12.indd 6

04/09/08 16:26:54

Playing Music
1. Press Source button to select the source (iPod, AM, FM, Aux). 2. Press + button to increase volume. 3. Press button to decrease volume.

Languages/Region

1. 2. 3. 4. Press the Menu/Up Level button until you reach the Top Menu screen. Use Up/Down arrows to select Region and press Enter. Use Up/Down arrows to select language. Press Enter. Use Up/Down arrows to select radio band region type. Press Enter.

Radio Tuning

1. If AM or FM radio is already selected and playing, use Up/Down arrows to tune frequency; hold either button and release to scan for the next station. 2. Otherwise, press Source until FM or AM is selected. 3. Tune to the desired frequency using Up/Down arrows; hold either button and release to scan for the next station.

Setting Presets

1. While listening to AM/FM radio, press and hold Preset for 2 seconds. The Radio Preset screen will be displayed. 2. Use Up/Down arrows to select slot to store preset. Press Enter to conrm. Preset is stored!
To Select a Preset for Listening
1. Press Preset once at any screen to display the Preset list. 2. Use Up/Down arrows to highlight Preset. Press Enter to conrm. Preset station will begin playing!
0024CSK - JBLOnTime200iD v12.indd 7

CONTROLS (CONT.)

Alarm Setting
1. Press Menu/Up Level at any screen to display Top Menu (may require repeated presses, depending on which menu state the unit was previously in). 2. Use Up/Down arrows to highlight Alarm. Press Enter to conrm; or press Alarm to go directly to the Alarm menu. 3. Use Up/Down arrows to select an Alarm slot to edit. Press Enter to conrm. Hour eld becomes highlighted. 4. Use Up/Down arrows to set Hour. Press Enter to conrm. Minute eld becomes highlighted. 5. Use Up/Down arrows to set Minutes. Press Enter to conrm. AM/PM eld becomes highlighted. 6. Use Up/Down arrows to set AM/PM. Press Enter to conrm. 7. Use Up/Down arrows to set Day of Week, Weekdays, Weekends, Everyday or One-Time. Press Enter to conrm. 8. Use Up/Down arrows to set Alarm source. Press Enter to conrm. Alarm is set!
Note: During alarm-setting, if there is no user input for 2 seconds, display will return to the Now Playing screen. Press any one of the Enter, Up/Down arrows, or Menu/Up Level to return to setting selection. Use this same procedure to modify a previously set Alarm.

Alarm Power

To Enable/Disable a Set Alarm
1. Press Menu/Up Level at any screen to display the Top Menu (may require repeated presses, depending on which menu state the unit was previously in). 2. Use Up/Down arrows to highlight Alarm. Press Enter to conrm; or press Alarm to go directly to the Alarm menu. 3. Use Up/Down arrows to highlight Alarm. Press Alarm to enable/disable the alarm. An icon will be displayed on the left when the alarm is enabled, and the alarm will sound at the set time.

Preset Select Up

Waking to the iPod
1. 2. 3. 4. 5. Use the steps under Alarm Setting and choose iPod as the source. On your iPod, choose the song you would like to awaken to and press Play. Set the volume level on the JBL On Time 200ID unit. Put your iPod to sleep by holding down the Play/Pause button (older iPod models may vary). The JBL On Time 200ID system can be put to sleep by pressing the Power button.
Note: If you choose the last song on your iPod, please place the iPod in repeat mode, which will ensure that the iPod will continue playing past the last song.
0024CSK - JBLOnTime200iD v12.indd 8

04/09/08 16:26:55

Screen Contrast/Brightness
1. 2. 3. 4. Press the Menu/Up Level button until you reach the Top Menu screen. Use Up/Down arrows to select Display and press Enter. Use Up/Down arrows to select Brightness or Contrast. Press Enter. Adjust settings using Up/Down arrows.
Note: To set brightness to Auto, press the Down arrow until Auto is highlighted.

Sleep Timer

1. 2. 3. 4. Press the Menu/Up Level button until you reach the Top Menu screen. Use Up/Down arrows to select Sleep and press Enter. Use Up/Down arrows to select minutes and press Enter. The sleep timer is started and the unit will power off when the timer reaches zero.

Snooze Timer Set

1. Press and hold the Snooze button for 3 seconds until you reach the Set Snooze Timer screen. 2. Use Up/Down arrows to select minutes and press Enter. 3. Snooze feature will use this value the next time it is activated.
0024CSK - JBLOnTime200iD v12.indd 9

REMOTE NAVIGATION

Button Function
Turns main unit power on and off. Button is active in any menu state. Preset the hot key. A single press brings up the preset screen from any menu. Repeated presses cycle through the preset list to the next preset slot. Press and hold for 2 seconds when listening to the radio and the Now Playing screen is displayed, to store current radio station. Volume Increase. Display changes to Volume screen. Increases volume level, turns Amps on if off, then increases volume. If in snooze mode, cancels snooze mode and turns Amps on. Times out back to current menu. Volume Decrease. If in snooze mode, no action. If not in snooze mode and Amps are on, displays changes to Volume screen and decreases volume level. Times out back to current menu. Does not turn Amps on if off. Enter or Selection Conrmation button. Conrms selection on any JBL On Time 200ID settings screen. If Now Playing screen is displayed, returns to last-used menu screen. Scroll Up/Tune Up. Moves highlighted box up on any JBL On Time 200ID menu setting screen. Increases digit value when setting Time (hours and minutes) and Snooze Timer. In radio mode, manually increases tuning frequency; hold for Seek. Scroll Down/Tune Down. Moves highlighted box down on any menu setting screen. Decreases digit value when setting Time (hours and minutes) and Snooze Timer. In radio mode, manually decreases tuning frequency; hold for Seek. Menu or Up Level button. If Now Playing screen is displayed, takes user to top-level menu screen. If in menu settings, steps up one level to previous eld or menu screen. Hold for 2 seconds to return to Now Playing screen. Alarm hot key. Takes user to Alarms settings of menu tree. Button is active in any menu state. If alarm is sounding, turns alarm off. When viewing alarms list, enables or disables selected alarm. Snooze button and Snooze Timer setting hot key. If alarm is sounding, enables snooze mode. Press and hold for 2 seconds to enter Snooze Timer setting screen. Directly switches the JBL On Time 200ID source to iPod. Sends Scroll Down command to iPod navigation. Works in iPod navigation only. Sends Scroll Up command to iPod navigation. Works in iPod navigation only. Cycles to next source. AM FM iPod AUX.

A single press starts sleep time countdown, using currently set timer. Press and hold for 2 seconds to enter Sleep Timer setting screen (similar to base unit). Next Track in iPod navigation only. Does not affect JBL On Time 200ID menu navigation or function. Previous Track in iPod navigation only. Does not affect JBL On Time 200ID menu navigation or function. Enter/Select in iPod navigation only. Does not affect JBL On Time 200ID menu navigation or function. Similar function to the center button of the iPod. Menu/Up Level in iPod navigation only. Does not affect JBL On Time 200ID menu navigation or function. Similar function to the Menu button of the iPod. Play/Pause/Mute button. When iPod is the active source, a single press sends the Play/Pause command to the iPod. When AM, FM or AUX is the active source, a single press mutes audio/amp on the JBL On Time 200ID system.
0024CSK - JBLOnTime200iD v12.indd 10
JBL ON TIME 200ID MENU TREE
Now Playing (ON) Now Playing (Off)

Display

Region
HOT KEY POINT (on remote or base unit)
AL1-AL7 Brightness Contrast
HOT KEY POINT (on remote)
HR set sleep timer: 15-30-60 A Selection command displays setting conrmation and returns state to Top Level Menu screen.

Min Select Alarm

Set Language: English Spanish French German Italian Dutch
am/pm Hr set day Press and hold for 2 sec at any point in menu structure, to return to now Playing screen. Min
MO/TU/ WED/TH/FR/ SA/SU/WK/ ED/WE

Enable/ Disable

Adjust
A Selection command displays setting conrmation and returns state to Top Level Menu screen.
A Selection command returns state to display menu screen.
Set Radio Type: U.S. Europe Japan

AM FM iPod Aux Tone

0024CSK - JBLOnTime200iD v12.indd 11

04/09/08 16:26:59

JBL ON TIME 200ID MENU TREE (CONT.)

PRESET

SOURCE

SNOOZE

HOT KEY POINT (hold button for 3 sec on base unit)

Preset 1-10

Press and hold Preset button while listening to radio to store current station. Select slot 1-10 and press enter to store.
set snooze timer AM FM iPod Aux A Selection command displays setting conrmation and returns state to Top Level Menu screen.
Select and begin playing preset station
0024CSK - JBLOnTime200iD v12.indd 12

04/09/08 16:27:01

SPECIFICATIONS
Frequency Response: 70Hz 20kHz Power Consumption: 30 Watts maximum JBL On Time 200ID Transducer: Phoenix SE 1-3/4" (45mm) x 2 (full range per channel) Power: 2 x 6 Watts Input Impedance: >5k Ohms Signal-to-Noise Ratio: >80dB Input Sensitivity: 350mV RMS for rated power output Power (USA/Canada): 120 Volts, 60Hz AC Power (Europe/UK): Volts, 50Hz or 60Hz AC Power (Japan): 100 Volts, 50Hz or 60Hz AC Power (Australia): 240 Volts, 50Hz or 60Hz AC UL/CUL/CE-Approved Dimensions: 11-3/16" x 5-3/4" x 2-3/4" (W x D x H) (284mm x 146mm x 70mm) Weight: 1.8 lb (0.8kg) Remote Battery: CR2025

TROUBLESHOOTING

SOUND QUALITY Symptom
No sound from the JBL On Time 200ID unit

Possible Problem

No power to the unit

Solution

Make sure the wall power outlet or power strip has power. Make sure all switches for outlet/ power strip are on and that all switches for speaker system are on. Make sure the correct source is selected; choose FM radio as a source. Turn up the volume. Check the system with a known good source, such as your iPod. Connect the Aux In cable to the headphone jack on your iPod. Reposition your JBL On Time 200ID unit until you nd better reception.
Is the display on? If not, power is not getting to your JBL On Time 200ID; try the solutions shown.
Incorrect source selection
No sound or weak signal from the AM/FM radio
Bad reception from current location
If you are still getting a weak signal from AM broadcasts, connect the external AM antenna to the AM antenna jack.
Interference Sound comes from one side/channel only Distortion (static, crackling or hissing sounds) iPod or audio cable is not seated properly Noise may be caused by interference from a monitor, cell phone or other transmitting device JBL On Time 200ID unit is being overdriven by an amplied audio source Volume level may be too high
Check surrounding area for any possible interference; wrap up any excess cables. Make sure the iPod or Aux In cable is seated all the way into the JBL On Time 200ID unit. Turn monitor off to see whether noise is eliminated. Move JBL On Time 200ID units cables farther away from monitor. Make sure the unit is connected to an appropriate source device. Make sure all signal cables are inserted snugly into receptacles. Check volume of source device; some devices will distort the output signal if the volume is set to maximum. We recommend that the source device EQ be set to Flat or Off. Check input cable connection. Wrap up excess input cable to make it as short as possible. Purchase a ferrite clamp and attach it over the input cable; a clamp can be purchased at your local electronics store. If you want to use a longer cable, make sure its a 3.5mm mini-jack stereo male-to-male cable.

Too much bass or treble

DISPOSAL: Do not dispose of this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary. IMPORTANT: Use UM4/AAA/LR03 alkaline-type nonrechargeable batteries only.

AutoDown

1. Menu/Up LevelTop Menu 2. Up/DownSleepEnter 3. Up/DownEnter 4. 0

Snooze

1. Snooze3SnoozeTimer 2. Up/DownSnoozeEnter 3. Snooze
0024CSK - JBLOnTime200iD v12.indd 121

04/09/08 16:28:04

1 Now Playing2. Amps Amps Amps Amps EnterJBL On Time 200IDNow Playing /JBL On Time 200ID /JBL On Time 200ID /JBL On Time 200ID iPodiPod

AM FM iPod AUX

12Sleep Timer () iPodJBL On Time 200ID

iPodJBL On Time 200ID

iPodEnter/JBL On Time 200IDiPod
iPod/JBL On Time 200IDiPod //iPod1/AMFMAUX JBL On Time 200ID
0024CSK - JBLOnTime200iD v12.indd 122
NOWPLAYING () NOWPLAYING ()

AL1-AL7

SLEEP 153060 SELECTION

2 NOWPLAYING SELECTION

// // // /

SELECTION

AM FM IPOD AUX

SELECTION

0024CSK - JBLOnTime200iD v12.indd 123

04/09/08 16:28:07

JBL ON TIME 200ID()
[] Selection 110 [ENTER].

Aux Selection

0024CSK - JBLOnTime200iD v12.indd 124

04/09/08 16:28:09

70Hz 20kHz 30 SE -3/4" (45mm) x 2() 2 x 6 5kOhms S / N80db 350mVRMS /120,60HzAC /,50Hz60Hz AC 100,50Hz60HzAC 240,50Hzor 60Hz AC UL/CUL/CE- 11-3/16" x 5-3/4" x 2-3/4" (W x D x H) (284mm x 146mm x 70mm) 1.8 lb (0.8kg) CR2025

JBL On Time 200ID

FM iPod Aux IniPod JBL On Time 200ID

JBL On Time 200ID

AM / FM

AM AMAM

iPodAuxInJBL On Time 200ID JBL On Time 200ID EQ Ferrite 3.5mm

JBL On Time 200ID

JBL On Time 200ID

iPodEQ

UM4/AAA/LR03
0024CSK - JBLOnTime200iD v12.indd 125

iPod

iPod iPod JBL On Time 200IDUSB USB USB

iPodJBL On Time 200ID

USB USB
JBL On Time 200IDAAA3 AAA3

JBL On Time 200ID

0024CSK - JBLOnTime200iD v12.indd 126

04/09/08 16:28:10

0024CSK - JBLOnTime200iD v12.indd 127
HARMAN CONSUMER GROUP, INC.,

line-level

0024CSK - JBLOnTime200iD v12.indd 128

iPod JBL iPod iPod

0024CSK - JBLOnTime200iD v12.indd 129
JBL On Time 200ID iPod MP3

(ONEPOINT)

OnePoint iPod Apple iPod JBL On Time 200ID iPod

COE( OCT(

0024CSK - JBLOnTime200iD v12.indd 130

DC In Aux In

0024CSK - JBLOnTime200iD v12.indd 131
1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
24 Enter Enter Enter Aux In
0024CSK - JBLOnTime200iD v12.indd 132

04/09/08 16:28:11

Enter Enter Enter

Alarm Source Power

2 Enter
0024CSK - JBLOnTime200iD v12.indd 133

04/09/08 16:28:12

/ 2. 3. 4. 5. 6. 7. 8.

/ / / / / / /

Enter Enter / Enter

/ Enter

Enter /

1. 2. 3. / /

1. 2. 3. 4. 5. iPod

iPod JBL On Time 200ID

0024CSK - JBLOnTime200iD v12.indd 134

(Auto)

3 Enter
0024CSK - JBLOnTime200iD v12.indd 135

04/09/08 16:28:13

2 Amps Amp Amps Amps Enter JBL On Time 200ID JBL On Time 200ID Amps
2 JBL On Time 200ID iPod iPod iPod iPod iPod iPod AUX 2 iPod iPod Enter/ iPod iPod iPod JBL On Time 200ID JBL On Time 200ID JBL On Time 200ID JBL On Time 200ID JBL On Time 200ID iPod /amp iPod iPod AUX
0024CSK - JBLOnTime200iD v12.indd 136
0024CSK - JBLOnTime200iD v12.indd 137

04/09/08 16:28:16

10 ENTER
0024CSK - JBLOnTime200iD v12.indd 138

04/09/08 16:28:17

70Hz 20kHz 30 JBL On Time 200ID (45mm) x 2 ( 2x6 >5k >80 350mV RMS ( ( 60 ( ( UL/CUL/CE 11-3/16 ( x x 1.8 ) (284 (0.8 ) CR2025 x 5-3/4 x 146 x 2-3/4 x 70 )
( ) JBL On Time 200ID Time 200ID JBL On AM/FM JBL On Time 200ID AM AM AM iPod iPod JBL On Time 200ID / JBL On Time 200ID

Phoenix SE 1-3/4" )

FM (Aux In)

/ / ) ) ) 100 240

120 220-50
/ iPod iPod JBL On Time 200ID (Aux In)

M4/AAA/LR03

(Flat) JBL On Time 200ID
0024CSK - JBLOnTime200iD v12.indd 139
iPod iPod iPod 200ID USB JBL On Time USB iPod JBL On Time 200ID

AAA JBL On Time 200ID

0024CSK - JBLOnTime200iD v12.indd 140
0024CSK - JBLOnTime200iD v12.indd 141
, . , . . . . 10 . (, ) . . . , , , , ( ). , , , , . /. . . , , , . , . . . . (, , .) . (, ). ( ). . HARMAN CONSUMER GROUP, INC. . .

: , . , .

0024CSK - JBLOnTime200iD v12.indd 142

.

: . , . .

,

: . , , ,.
0024CSK - JBLOnTime200iD v12.indd 143

04/09/08 16:28:18

: .
: iPod JBL. , iPod JBL , iPod. iPod, .
JBL On Time 200ID iPod, , . JBL On Time 200ID , , iPod . JBL On Time 200ID - . , iPod, . iPod, -3 , , , , . - , . JBL On Time 200ID iPod -. , iPod, . ,
iPod . Apple iPod JBL On Time 200ID, , iPod, .
JBL On Time 200ID iPod, , . . .

JBL On Time 200ID , , .

JBL On Time 200ID , .

, . .

0024CSK - JBLOnTime200iD v12.indd 144

JBL ON TIME 200ID

iPod -. iPod . , AAA . , AM-. - , . DC In, . Aux In.
0024CSK - JBLOnTime200iD v12.indd 145
1. Menu/Up Level (/ ) Top Menu ( ) ( , , ). 2. Up/Down (/) Clock (). Enter (). 3. H Up/Down 12- 24-. Enter (). 4. Up/Down Hour (). Enter (). Minute (). 5. Up/Down Minutes (). Enter. AM/PM ( /). 6. Up/Down Day of Week ( ). Enter. !
: 2 , Now Playing ( ). Enter, Up/Down, Menu/Up Level.

Power ()

Navigation ()

Select Up ( )

Alarm ()

Source ()

Menu/Up Level (/ )

Enter ()

Preset ( )

Select Down ( )

0024CSK - JBLOnTime200iD v12.indd 146

04/09/08 16:28:19

1. Source ( iPod, AM, FM, Aux ()). 2. + . , 3. - . ,

/ (LANGUAGES/REGION)

Menu/Up Level , Top Menu. Up/Down Region () Enter. Power () Up/Down . Enter. Up/Down . Enter.

Alarm () Source ()

1. AM FM , Up/Down ; , , . 2. AM FM Source , FM AM. 3. Up/Down ; , , .

Preset ( ) Select Up ( )

1. Preset, Preset list ( ). 2. Up/Down Preset. Enter. ! WWW.JBL.COM 147
0024CSK - JBLOnTime200iD v12.indd 147
1. AM/FM , Preset 2. Radio Preset ( ). 2. Up/Down , . Enter. !
* 1. Menu/Up Level Top Menu ( , , ). 2. Up/Down Alarm. Enter; Alarm, Alarm. 3. Up/Down Alarm, . Enter. Hour. 4. Up/Down Hour. Enter. Minute. 5. Up/Down Minutes. Enter. AM/PM. 6. Up/Down AM/PM. Enter. 7. Up/Down Day of Week ( ), Weekdays ( ), Weekends ( ), Everyday () One-Time ( ). Enter. Power () 8. Up/Down Alarm. Enter. !
: 2 , Now Playing. Enter, Up/Down, Menu/Up Level. * .
/ 1. Menu/Up Level Top Menu ( , , ). 2. Up/Down Alarm. Enter; Alarm, Alarm. 3. Up/Down Alarm. Alarm, /. , .

Select Down ( ) iPod 1. iPod ( ). , 2. iPod , , Play (). 3. JBL On Time 200ID . 4. iPod , Play/Pause (/) ( iPod ). 5. JBL On Time 200ID Power.
: iPod, iPod , iPod .
0024CSK - JBLOnTime200iD v12.indd 148
/ (CONTRAST/BRIGHTNESS) 1. Menu/Up Level , Top Menu. 2. Up/Down Display () Enter. 3. Up/Down Brightness () Contrast (). Enter. 4. Up/Down. : Auto (), Down , Auto. (SLEEP TIMER) 1. Menu/Up Level , Top Menu. 2. Up/Down Sleep ( ) Enter. 3. Up/Down Enter. 4. , , . (SNOOZE) 1. Snooze 3 , Set Snooze Timer screen ( ). 2. Up/Down Enter. 3. Snooze .
0024CSK - JBLOnTime200iD v12.indd 149

04/09/08 16:28:20

. . "". . . 2 , Now Playing, . . Volume (). , , . . . . . Volume, . . . Enter () Selection Confirmation ( ). JBL On Time 200ID. Now Playing, . / . JBL On Time 200ID. Time ( ) Snooze Timer. ; Seek (). / . . Time ( ) Snooze Timer. ; Seek (). Menu . Now Playing, . . 2 Now Playing. " " . . . , . . Snooze "" Snooze Timer. . 2 , Snooze Timer. JBL On Time 200ID iPod.
Scroll Down iPod. iPod.
Scroll Up iPod. iPod.

. AM

"" . 2 , Sleep Timer ( ). iPod. JBL On Time 200ID.
iPod. JBL On Time 200ID.
Enter/Select (/) iPod. JBL On Time 200ID. iPod. Menu/Up Level iPod. JBL On Time 200ID. Menu iPod. Play/Pause/Mute (// ). iPod, Play/Pause (/). AM, FM AUX, / JBL On Time 200ID.
0024CSK - JBLOnTime200iD v12.indd 150

JBL ON TIME 200ID

() ()
( ) 15-30-60 .

:

//// //// / /

2 , Now Playing.

.

AM FM iPod Aux

0024CSK - JBLOnTime200iD v12.indd 151

04/09/08 16:28:23

( )

( 3 )

Preset ( ) , . .
0024CSK - JBLOnTime200iD v12.indd 152

04/09/08 16:28:25

: 70 20 : 30 JBL On Time 200ID: Phoenix SE 1-3/4" (45 ) x 2 ( ) : 2 x 6 : >5 -: >80 : 350 (/): 120 , 60 (/): , 50 60 :(): 100 , 50 60 :(): 240 , 50 60 UL/CUL/CE : 11-3/16" x 5-3/4" x 2-3/4" ( x x ) (284 x 146 x 70 ) : 1,8 (0,8 ) : CR2025

JBL is a trademark of Harman International Industries, Incorporated, registered in the United States and/or other countries. JBL On Time is a trademark of Harman International Industries, Incorporated. iPod, Apple and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries. Made for iPod means that an electronic accessory has been designed to connect specically to iPod and has been certied by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. JBL est une marque commerciale de Harman International Industries, Incorporated, dpose aux tats-Unis et/ou dans dautres pays. JBL On Time est une marque commerciale de Harman International Industries, Incorporated. iPod, Apple et iTunes sont des marques commerciales de Apple Inc., dposes aux tats-Unis et dans dautres pays. Made for iPod signie que le dispositif lectronique a t spcialement conu pour se connecter liPod et quil est certi par le dveloppeur comme conforme aux normes de performance Apple. Apple nest pas responsable du fonctionnement de ce dispositif ou de sa conformit avec les normes de scurit ou rglementaires.
Harman Consumer Group, Inc.
8500 Balboa Boulevard, Northridge, CA 91329 USA 516.255.4525 (USA only) www.jbl.com 2008 Harman International Industries, Incorporated. All rights reserved. Tous droits rservs. Document Number: 950-0232-001 REV.B
0024CSK - JBLOnTime200iD v12.indd 198