CAPRESSO

Impressa S9

One Touch

Fully Automatic Coffee & Espresso Center with Clearyl Water Care System Operating Instructions and Warranty
Customer Service 1-800-220-5701

Impressa S9 One Touch

IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electric shock and personal injury, do not immerse cord, plugs or appliance in water or other liquids. 4. Close supervision is necessary when any appliance is used by or near children. 5. Unplug from outlet when not in use and before cleaning. Allow it to cool before putting on or taking off parts, and before cleaning the appliance. 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment. 7. The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or personal injury. 8. Do not use outdoors. 9. Do not let the cord hang over the edge of a table or counter, or touch hot surfaces. 10. Do not place on or near a hot gas or electric burner, or in a heated oven. 11. Always attach plug to appliance first, then plug cord into
wall outlet. To disconnect, turn any control to off then remove plug from wall outlet. 12. Do not use appliance for other than intended use. 13. Use extreme caution when disposing hot steam. 14. For household use only.
SAVE THESE INSTRUCTIONS SPECIAL CORD SET INSTRUCTIONS
Regarding your cord set: A. A short power-supply cord (or detachable power-supply cord) is to be provided to reduce risks resulting from becoming entangled in or tripping over a longer cord. B. Longer detachable power-supply or extension cords are available and may be used if care is exercised in their use. C. If a long detachable power-supply cord or extension cord is used, 1) The marked electrical rating of the detachable power supply cord or extension cord should be at least as great as the electrical rating of the appliance, 2) If the appliance is of the grounded type, the extension cord should be a rounding type 3-wire cord, and 3) The longer cord should be arranged so that it will not drape over the counter-top or table-top where it can be pulled on by children or tripped over.
Notice: This machine has a 3-prong grounded plug. To reduce the risk of electrical shock, this plug will fit in an outlet only one way. If the plug does not fit in the outlet, contact a qualified electrician. DO NOT modify the plug in any way.

JURA-CAPRESSO

Jura was founded in 1931 in Switzerland. Capresso was founded in 1994 in the USA. Both companies have joined forces in the US to bring you the finest Fully Automatic Coffee Centers available anywhere. With innovative and user-friendly features, high quality materials, clear instructions and superb customer service, we are sure you will experience the best coffee, espresso, cappuccino or latte you have ever had. We hope you will enjoy your new Fully Automatic Coffee Center and will recommend it to your friends. For more information about our products visit our website www.capresso.com.

CAUTION

This appliance is for household use. Any servicing other than cleaning and user maintenance should be performed by an authorized service representative. Do not immerse base in water or try to disassemble. To reduce the risk of fire or electric shock, do not remove the base. No user serviceable parts inside. Repair should be done by authorized service personnel only. Check voltage to be sure that the voltage indicated on the name plate agrees with your voltage. Never use warm or hot water to fill the water container! Use cold water only! Keep your hands and the cord away from hot parts of the appliance during operation. Never clean with scouring powders or hard implements.

Customer Service

1-800-220-5701
Mon-Thu 9AM 9PM Fri 9AM 8PM Sat 9AM 5PM Eastern Standard Time. email: contact@capresso.com Jura-Capresso 81 Ruckman Road, Closter, NJ 07624 201-767-3999 Fax: 201-767-9684 Website: www.capresso.com 3.

FIG. 1

15 15a 18 19
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 15a. 16. 17. 18. 19.

FIG. 1a

a. Scoop b. Cleaning tablets c. Water indicator d. Clearyl filter

FIG. 1b

Main Power Switch
Height-Adjustable Dual Coffee Spout Operating Display (Fig.2) Removable Water Tank Low Water Flotation Device (inside) Clearyl Water Care Cartridge (Not Installed) Lid for Water Tank Holder for Clearyl Water Cartridge Bean Aroma Protection Lid Cover for Bean Container Lid for Ground Coffee Funnel Opening for Ground Coffee Warming Plate Auto Cappuccino System (Fig. 3) Hot Water Spout Steam Nozzle frothXpress system (Fig. 15 through 17a) with thermal milk container attached Used Coffee Container Cup platform Removable Drawer/Used Water Tray Cover for Rotary Dial and A La Carte Button (Fig. 3A)

Factory Settings for Beverage Buttons: All coffee buttons are set to temperature HIGH. The hot water function is set to XHIGH. 1-CUP Espresso button (Fig. 2,C) 2 oz./ STRONG. 2-CUP Espresso button (Fig. 2,F) 2 oz. per cup / XSTRONG. 1-CUP Coffee button (Fig. 2,D) 5 oz./ STRONG. 2-CUP Coffee button (Fig. 2,G) 5 oz. per cup / XSTRONG. A La Carte button (Fig. 3A,N) 7 oz. Cappuccino; one-touch button (Fig. 3.6) 14 seconds milk, 0 seconds pause, 2 oz. coffee / NORMAL. Latte Macchiato; one-touch button (Fig. 3.7) 14 seconds milk, 15 seconds pause, 2 oz. coffee / STRONG. Milk portion; Selector Dial (Fig. 3.5) 14 seconds milk, Water Portion; Selector Dial, 5 oz.; XHIGH. Other Factory Settings: 5-hour auto shut-off. Water hardness setting: 10dH. Filter: FILTER NO (Clearyl Water Care Cartridge: not installed) Language: English. Display: AM/PM and OZ. Economy Mode (energy saving): Off Time / Weekday: --.-- (not set) Automatic On and Off times: not set Cappuccino Rinsing: set to NOW; display shows CAPPUCCINO RINSING immediately after frothing milk. 6. PREPARING THE MACHINE FOR THE FIRST TIME Make sure all accessories, literature and any other items are removed from the bean container and the water tank.
DO NOT install the Clearyl water filter now (chapter 13a). Make sure the machine sits on an even, flat surface and the drawer and used coffee container are inserted (Fig. 1). Plug-in machine. 6a. FILLING THE WATER TANK Please note: Only use fresh, cold water. Never fill water tank with carbonated water, milk or any other liquid. Remove the water tank, rinse and fill with fresh, cold water. Replace water tank and make sure that it engages securely. 6b. FILLING THE BEAN CONTAINER Please note: To insure that the conical burr grinder will work for a long time, do not use it with any kind of coated or flavored beans (all coating and flavors contain sugar or sugar substances). Such coating can damage the burrs. Using such beans voids the warranty. Have your coffee store grind the sugar coated beans and use as described in chapter 9e. Flavored Coffee: If you like flavored coffees we recommend adding flavors to your coffee after brewing. This way you can use your regular coffee beans in the bean container. Adding the flavors after brewing lets you control the flavor intensity much better than with pre-flavored coffee. Your local coffee store typically carries a variety of liquid flavors. Open the Cover Lid (Fig. 5). Remove the Aroma Protection Lid (Fig. 6). Make sure the bean container is empty and clean. Fill beans into the bean container (Fig. 7). Frozen Beans: Thaw 3 to 4 hours before adding to bean container. This prevents moisture from seeping into the grinder. 14.

RINSING. The water will be caught in the drawer underneath. The rinse cycle stops by itself and the display reads: COFFEE READY. You are now ready to make coffee. *Note: S9 OT can be programmed to automatically start the rinsing cycle after HEATING UP is displayed (chapter 14.7). 8a. TURNING THE MACHINE OFF / RINSING Before turning off the S9 OT, place containers under the Dual Coffee Spouts and Auto Cappuccino System (Fig. 4). When the S9 OT is turned off or turns itself off it will prompt for short cleaning cycles as follows: Only the Dual Coffee spouts were used: The S9 OT displays MACHINE RINSING. For a few seconds hot water will be dispensed through the Dual Coffee Spouts and through the coffee spout of the Cappuccino section. The machine and the display turn off. The Auto Cappuccino Spouts and the Dual Coffee Spouts were used: The S9 OT first displays CLEAN CAPPUCCINO and the Rinse button illuminates. If the Rinse button is not pushed within the next ten seconds, the display shows SPOUT RIGHT / PRESS RINSE. Press the Rinse button. The S9 OT will dispense some hot water through the coffee spout of the Cappuccino section. It will then push some hot water through the Dual Coffee Spouts and turn off. Please note: When the S9 OT turns off you may hear a slight hissing noise.
9. COFFEE PREPARATION 9a. PRE-WARM CUPS In the morning pre-warm your cups with hot water through the Hot Water Spout. Cold cups reduce the coffee temperature by 5 F to 10 F. Place a cup under the Hot Water Spout, turn the Selector Dial (Fig. 3.3) until the display shows HOT WATER and push the Selector Dial. The display shows TEMP. XHIGH and water will flow into your cup. Push the Selector Dial again to stop and discard the water. COFFEE READY. 9b. BREWING COFFEE AND ESPRESSO The machine has four pre-set coffee buttons, 1 ESPRESSO, 2 ESPRESSI, 1 COFFEE, 2 COFFEES (Fig. 2). All buttons are pre-set for coffee strength, coffee volume and temperature (chapter 5). Place one or two cups underneath the Dual Coffee Spouts and push the desired button. The machine will grind, tamp and then brew the coffee. It uses a 2-step brewing process (pre-brew phase), pauses for a few seconds, and then starts the brewing process. The display will show the name of the button you pushed, e.g. 1 ESPRESSO and the selected coffee strength indicated by a bean graphic, e.g. 4 beans = strong. Please note: when pushing any of the two-cup buttons, the coffee strength is not displayed. Important: After the brewing stops the machine will discard the used coffee grounds. Please do not try to pull out the drawer (Fig.1,18) during this operation. It can seriously damage the machine.There is no need to pull out the drawer until the display shows the message EMPTY TRAY or EMPTY GROUNDS. 16.

Please note: If the Ground Coffee button (Fig. 3A,O) is pressed by mistake just press one of the coffee buttons, NOT ENOUGH PRE-GROUND. The machine will automatically stop and return to COFFEE READY. Please note: After use of sugar coated or flavored coffee through the pre-ground coffee funnel you may experience some flavor transfer when switching back to your regular coffee. 10. AUTO CAPPUCCINO SYSTEM The S9 OT features the Auto Cappuccino System with two spouts located behind each other (Fig. 15) The front spout produces steam (steam nozzle). The rear spout produces high pressure brewed coffee. Attached to the steam nozzle is the removable frothXpress system. It siphons, steams and froths milk. The S9 OT Cappuccino System prepares a variety of milk based drinks without ever moving the cup: Cappuccino, Latte, Latte Macchiato, Caf Mocha, Hot Milk, Hot Chocolate. 10a. PREPARING THE THERMAL MILK CONTAINER The S9 OT comes with a 20 oz. double walled vacuum stainless steel container. This custom-made milk container can keep cold milk cold for up to eight hours. There is no need to worry about the milk getting warm during the day. The milk container comes complete with: lid and attached stainless steel hose two short flexible hoses one long flexible hose spare black and transparent fittings (Fig. 14a, 14b). The two short hoses have a connecting piece on each end. Unscrew the milk container lid. A stainless steel hose is attached to the inside of the container. A small transparent fitting holds the hose in place (a spare fitting is included).
Rinse the milk container with fresh water before first use and fill with fresh cold milk. Close the lid. Insert one end of the short flexible hose into the lid opening. Remove the red cap from the side of the frothXpress and insert the other end of the short flexible hose (Fig. 15). You are ready to steam/froth milk. Storing the milk container: always remove the outside flexible hose and open the lid before storing the milk container in the refrigerator. Important: The milk container is not dish washer safe. Do not immerse the milk container in any liquid. Using the long flexible hose: To siphon milk directly from a milk carton use the long flexible hose. Insert one of the black connecting pieces in the straight-cut end of the hose and insert into the frothXpress. Insert the other end with the V-cut into the milk container (Fig. 17). 10b. THE FROTHXPRESS SYSTEM This system produces unlimited amounts of hot steamed or frothed milk right into your cup. Important: This system siphons milk and mixes it inside the frothXpress with hot steam. It is necessary that all parts are connected tightly, otherwise the siphoning process will not work. Frothing Position: The dial points to the upper part of the face (12 to 2 oclock). This section is used for Cappuccino and Latte Macchiato. In the 12 oclock position the frothXpress creates the most milk froth. Turning the dial towards the 2 oclock position increases the milk temperature (Fig. 16). Steaming Position: The dial points to the lower part of the face 18.

(6 to 4 oclock). Milk will be steamed, not frothed. Turning the dial towards the 4 oclock position increases milk temperature. Steam Only Position: When the dial points to the steam symbol (3 o'clock), the siphoning is blocked. Only steam will pass through the frotherXpress. 10c. PREPARING ONE-TOUCH CAPPUCCINO, CAF MOCHA AND LATTE COFFEE READY. The frothXpress dial points to area between 12 and 2 oclock The milk container is connected. Place your cappuccino cup underneath the Cappuccino system and push the cappuccino button (Fig. 3.6). The S9 OT starts grinding, the display shows CAPPUCCINO and the coffee strength (bean graphic). It then siphons, heats and froths milk for 14 seconds and adds 2 oz. of high-pressure brewed coffee (Factory Settings, chapter 5). The display shows ENJOY then COFFEE READY. Tip: If you use a glass cup you can see how much froth is created and how the coffee sits beneath the layer of milk froth. Slightly stir to distribute the coffee evenly into the hot milk. CAF MOCHA: use chocolate milk or add chocolate syrup to your cold milk and stir then proceed as explained before. LATTE: turn the frothXpress dial between the 4 and 6 oclock position and repeat above steps. Milk is steamed without froth. Please note: You can always add an additional shot of espresso by placing your cup under the Dual Coffee Spouts (Fig. 4) and pushing the 1-Cup Espresso button. You can also add additional hot milk (chapter 10e).
Please note: You can always stop the beverage preparation by pushing any of the beverage buttons. 10d. PREPARING ONE-TOUCH LATTE MACCHIATO This beverage is very popular in Europe. It is normally served in glasses, approx. 4 to 5 inches tall and 2 inches in diameter. COFFEE READY. The frothXpress dial points to the 12 to 2 oclock position. Place your latte macchiato glass underneath the Cappuccino system and push the Latte Macchiato button (Fig. 3.7). The S9 OT starts grinding, the display shows LATTE MAC. and the coffee strength. It then siphons, heats and froths milk for 14 seconds and pauses. The display shows PAUSE (factory setting is 15 seconds). During this time the milk separates from the milk froth. After the pause 2 oz. of high-pressure brewed coffee are automatically added. LATTE MAC. Then ENJOY. The coffee settles between the froth and the milk giving the beverage the typical multi-layered, Latte Macchiato look. COFFEE READY. 10e. PREPARING HOT MILK / HOT CHOCOLATE The Cappuccino System can produce hot milk or hot chocolate without brewing coffee. COFFEE READY. Connect the milk container to the frothXpress system or use the long flexible hose inserted into any milk carton. Place your cup underneath the Cappuccino system. Turn the Selector Dial (Fig. 3.3) until the display shows MILK or MILK PORTION ("MILK" siphons milk until you stop the action by pushing the Selector Dial button again. 19.

The next time you push the Cappuccino button, the S9 OT will produce that amount of milk and coffee. 12. WATER CARE The S9 OT works with: tap water bottled water distilled water. We recommend using tap water or bottled water. Distilled water has no minerals and does not improve the taste of coffee. Water that is heated inside the machine leads to calcium deposits. Tap water has a varying degree of water hardness (chapter 12a). Most bottled water has a low level of water hardness. IMPORTANT: do not use carbonated water or any other liquid in the water tank. You have the following options to take care of the water. Decalcifying System (chapter 17.1). Clearyl Water Filter Cartridge (chapter 13a). The machine is factory pre-set to automatically remind you to decalcify. 12a. WATER HARDNESS MONITOR Your S9 OT is set to a water hardness of 10dH and will automatically indicate when it is time to perform a decalcifying cycle. You can change the water hardness setting from 1 to 30dH. If you are not sure about the hardness of your water, ask your local water company for the "Water Hardness in Grains." The machine displays the water hardness in the German hardness scale which is a bit different from the American "Grain" scale (see chart below). You can also use the water hardness indicator strip ("Aquadur" in Welcome Pack) to determine the water hardness: Insert the strip for one second into the water you want to use. Shake off any access water and wait for one minute. 21.
One or more sections of the indicator strip will turn reddish. Change the water hardness setting according to the table below.
Display Equivalent Indicator Strip German American number of "reddish" fields Degree Grains

Display

Not Active* INACTIVE 1. extremely soft water 1-4 2. soft water 5-9 3. medium water 10-14 4. hard water 15-19 5. very hard water 20-24 6. extremely hard water 25-30
1-5 6-11 13-18 19-24 25-30 32-38
None 1 to to to to 5 All 5
Push the Rotary Dial to enter the program. Turn the Rotary Dial until the display shows 20dH. Push the Rotary Dial to confirm the setting. CONFIRMED and then HARDNESS 20dH. Turn the Rotary Dial until the display shows EXIT. Push the Rotary Dial COFFEE READY. The machine will automatically remind you when it is time to decalcify (chapter 17.1). Please note: You can set the hardness monitor to INACTIVE. In this case you must use distilled water. In this setting the S9 OT will not remind you to decalcify the machine. 13. CLEARYL WATER FILTER CARTRIDGE The machine comes with one Clearyl Water Filter Cartridge. The Clearyl cartridge Reduces the water hardness up to 75%. Removes (if present) up to 85% chlorine, up to 90% lead, up to 95% copper and up to 67% aluminum. Cleans the water through an upward current principle (Fig. 10) just before the brewing cycle starts, ensuring freshly filtered water every time you make coffee. Lasts for 75 liters (~2,500 oz.) of water or up to two months. Eliminates decalcifying except when using very hard water (25 grains or higher), see chapter 12. In this case we recommended to decalcify the machine once or twice a year. To reorder cartridges, see chapter 20.

*Not Active: You can only use this setting for distilled water. Level 5 and Level 6: If the tap water falls into these two categories, decalcifying will be frequent. In this case bottled water is recommended. Most bottled water has a low calcium level. Please note: If your water has a high calcium content (level 5 or 6) and you use the Clearyl Filter Cartridge we recommend to decalcify the machine once or twice a year (chapter 17 and 17.1). Please note: If you use Spring or Bottled Water with low calcium levels you can set the hardness to 3dH, "extremely soft water". 12b. CHANGING THE WATER HARDNESS MONITOR COFFEE READY Example: change the hardness setting from 10dH to 20dH Push the Rotary Dial until display shows MAINTENANCE. Turn Rotary Dial until the display shows HARDNESS 10 DH.
13a. INSTALLING & ACTIVATING THE CLEARYL WATER CARTRIDGE Installing: Important: Never install the cartridge before or during "Preparing Machine For The First Time" (chapter 6). Remove cartridge from its bag and rinse cartridge under water. Add the extension rod to the cartridge (Fig. 11). Remove the water tank, make sure it is empty. Pull up the cartridge holder and insert the cartridge with its tapered end down into the water container (Fig. 12, Fig. 13). Make sure it fits securely inside the fins. Push down gently (Fig. 13). Close the cartridge holder. Make sure the holder snaps into place. Fill the water tank with fresh cold water and replace. Activating: You must activate the cartridge for the machine to monitor it properly. Otherwise the S9 OT assumes decalcifying mode. COFFEE READY. 1. Push the Rotary Dial until display shows MAINTENANCE. 2.Turn the Rotary Dial until the display shows FILTER NO and push the Rotary Dial to enter the program. 3.Turn the Rotary Dial until FILTER YES is displayed and push the Rotary Dial. CONFIRMED is displayed briefly and then INSERT FILTER/PRESS STEAM. The Rinse button illuminates. 4.Place a 20 oz. container under the frothXpress (Fig. 4) and turn the frothXpress dial to the 3 o'clock position. 5.Push the Rinse Button. FILTER RINSING. For the next 60 seconds the machine will push water through the cartridge

Push the Rotary Dial until display shows MAINTENANCE. Turning the Rotary Dial clockwise the display shows the following functions: Chapter MAINTENANCE. 15.1 PRODUCTS. 14.1 (beverage buttons) FILTER NO or YES. 13a HARDNESS 10Dh.. 12b If FILTER YES this function is suppressed. ECONOMY MODE . 14.3 TIME --.--.. 14.4 UNIT ON/OFF. 14.5 OFF AFTER.. 14.6 RINSES.. 14.7 INFORMATION.. 14.8 SETTING AM/PM / OZ. 14.9 LANGUAGE ENGLISH.. 14.10 EXIT Please note: to get back to COFFEE READY, turn the Rotary Dial until the display shows EXIT, then push the Rotary Dial. 14.1 RE-PROGRAMMING BEVERAGE BUTTONS (PRODUCTS) This program allows you to change all parameters for all beverage functions. The following parameters can be changed, where applicable: Coffee volume (WATER): for all 1-cup buttons from 0.5 to 8 oz., for all 2-cup buttons from 0.5 to 8 oz. per cup (max total 16 oz.) Coffee strength (AROMA) for all 1 cup buttons choose from five settings: XMILD, MILD, NORMAL, STRONG, XSTRONG. The display shows from one to five coffee beans to indicate the selected strength during brewing. 24.
Temperature: for all coffee drinks the temperature can be set to NORMAL or HIGH MILK PORTION: steaming can be set from 3 to 120 seconds. PAUSE: the pause time between milk production and coffee brewing for the one-touch Cappuccino and Latte Macchiato buttons can be set from 0 to 60 seconds. HOT WATER PORTION: can be set from 0.5 to 15 oz. The temperature for the hot water function can be set to LOW, NORMAL or XHIGH (for specialty teas and pre-warming cups). Example 1: Re-program the 1-Cup Coffee button to: 4 ounces of coffee, mild, normal temperature. COFFEE READY 1. Push the Rotary Dial until the display shows MAINTENANCE. 2. Turn the Rotary Dial to PRODUCTS and push the Rotary Dial. The display shows SELECT PRODUCT. 3. Push the 1-CUP COFFEE button. The display shows the current volume setting, e.g. WATER 5.0 OZ. 4. Push the Rotary Dial: WATER 5.0 OZ and turn the dial until the display shows WATER 4.0 OZ. 5. Push the Dial to confirm: CONFIRMED then WATER 4.0 OZ. 6. Turn the Rotary Dial until the display shows AROMA and the current strength setting, e.g. three beans graphic. 7. Push the Rotary Dial, NORMAL with three beans graphic, and turn the Dial until display shows MILD with two beans. 8. Push the Rotary Dial to confirm: CONFIRMED then MILD with two beans. 9. Turn the Dial until the display shows TEMPERAT. HIGH and push the Rotary Dial TEMPERAT. HIGH.
10. Turn the Dial until the display shows TEMPERAT. NORMAL. 11. Push the Rotary Dial to confirm: CONFIRMED then TEMPERAT. NORMAL. 12. Turn the Rotary Dial until the display shows EXIT and push the Rotary Dial. SELECT PRODUCT. 13. If you do not want to change another button, turn the dial until the display shows EXIT and push the Rotary Dial: COFFEE READY. Example 2: Re-program the Latte Macchiato button to: 3.5 oz. of coffee, extra strong, milk production for 20 seconds, pause to 10 seconds, temperature stays as is (HIGH). COFFEE READY 1. Push the Rotary Dial until the display shows MAINTENANCE. 2. Turn the Rotary Dial to PRODUCTS and push the Rotary Dial. The display shows SELECT PRODUCT. 3. Push the Latte Macchiato button. The display shows the current coffee volume setting, e.g. COFFEE 2.0 OZ. 4. Push the Rotary Dial, COFFEE 2.0 OZ, and turn the dial until the display shows COFFEE 3.5 OZ. 5. Push the Rotary Dial to confirm: CONFIRMED then COFFEE 3.5 OZ. 6. Turn the Rotary Dial until the display shows AROMA and the current strength setting, e.g. three beans. 7. Push the Rotary Dial, STRONG with four beans, and turn the Dial until the display shows XSTRONG with five beans. 8. Push the Rotary Dial to confirm: CONFIRMED then XSTRONG with five beans. 25.

14.10 LANGUAGES You can change the display from English to French, Portuguese, German, Italian, Dutch or Spanish. COFFEE READY Push the Rotary Dial until the display shows MAINTENANCE. Turn the Dial until the display shows LANGUAGE ENGLISH. Push and turn the Dial until the desired language appears and push to confirm. Turn the Dial to EXIT (in the language you choose). Push the Dial to get back to COFFEE READY (in the language you choose). 15. CARE AND MAINTENANCE MESSAGES The machine will automatically display messages. In some cases the message allows you to continue to brew coffee. In other cases no further coffee brewing is possible before the task has been completed. PRESS RINSE Push the Rinse button (Fig. 2,E). The machine pumps hot water through the coffee spouts or continues a cleaning program. FILL SYSTEM / PRESS RINSE Place containers underneath the Auto Cappuccino System and the Hot Water Spout (Fig. 4) and push the Rinse button (chapter 6c). FILL WATER TANK The water tank is almost empty. Add water before resuming brewing coffee. EMPTY GROUNDS or EMPTY TRAY The used coffee container is full (it holds a maximum of 16 coffee portions). You must empty the coffee container before you 29.
can resume brewing coffee. Make sure the Dual Coffee Spouts are moved upwards. Carefully lift and pull out the removable drawer (Fig. 18 and 19). TRAY MISSING. There is water in the drawer. Empty the drawer and the used coffee container, assemble and replace. Make sure the two metal contacts of the drawer are clean and dry. Please note: If the machine is not used for a few days, pull out the tray and empty the used coffee container. Used, moist coffee grounds can develop mold and mildew. Important: If you pull out the drawer without any corresponding message in the display you must empty the used coffee container. The machine assumes that it will be emptied. If you do not empty the container, used coffee will overflow inside the machine and cause serious damage to the coffee release mechanism. Please note: The machine does not sense if the used coffee container (Fig. 1,16) is inserted. If the used coffee container is not inserted, ground coffee discharges onto the drawer. TRAY MISSING Insert the drawer with the empty used coffee container. Make sure the metal contacts in the back of the drawer are clean and dry. FILL BEANS Add beans to the bean container. COFFEE READY / CLEAN MACHINE After approx. 220 coffee brewings or 80 initial rinsing cycles you must run a tablet cleaning cycle. You can still make coffee, however we highly recommend to perform the cleaning cycle within the next few days (chapter 16.1). COFFEE READY / CLEAN NOW After 30 more coffee brewings the message reads CLEAN NOW. COFFEE READY / DECALCIFY MACHINE

It is time to decalcify the machine. You can still make coffee, however we highly recommend to perform the decalcifying cycle within the next few days (chapter 17.1). Please note: If you use the Clearyl cartridge and the message appears, then your cartridge function was not activated. Follow the instruction in chapter 13a to program and activate the cartridge. If the cartridge is already in use for several weeks install a new cartridge. COFFEE READY / DECALCIFY NOW It is urgent to decalcify the machine. COFFEE READY / CHANGE FILTER It is time to replace the Clearyl filter (chapter 13b). NOT ENOUGH PRE-GROUND Not enough pre-ground coffee was filled into the ground coffee funnel (Fig. 1,11). The S9 OT stops the operation (chapter 9e). 15.1 MANUAL MAINTENANCE CYCLES The S9 OT will display when its time to perform certain cleaning programs. You can also manually access these programs and perform them. COFFEE READY. Push the Rotary Dial until the display shows MAINTENANCE. Push the Dial again, CLEAN CAPPUCCINO. Turning the dial shows you which programs you can access: CLEAN CAPPUCCINO (chapter 15.5) RINSE MACHINE (see example below in chapter 15.1) RINSE CAPPUCCINO (chapter 10g) CLEAN MACHINE (chapter 16.1) DECALCIFY MACHINE (chapter 17.1) CHANGE FILTER (chapter 13c)
If you push the Rotary Dial to enter one of the above programs, the display guides you through the necessary steps. Please note: If the display shows MAINTENANCE and you do not select one of the above programs within five seconds, the S9 OT will return to COFFEE READY. Example: Run a manual hot water rinse cycle. COFFEE READY. Push the Rotary Dial until the display shows MAINTENANCE. Push the Dial again, CLEAN CAPPUCCINO. Turn the Dial until the display shows RINSE MACHINE. Place a cup under the Dual Coffee Spouts. Push the Rotary Dial. The S9 OT will push hot water through the Dual Coffee Spouts and then return to COFFEE READY. 15.2 REMOVING STONES FROM THE BURR GRINDER If the burr grinder is blocked, proceed as follows: Turn off the machine by pushing the ON/OFF button (Fig. 2,B). Wait until the machine has shut down completely. Turn the main power switch off (Fig 1b). Open the bean container lid and remove all beans (scoop out beans or use a hand-held vacuum cleaner). Remove the screw in the bean container (Fig. 23) and push the grinder shield upwards (Fig. 24) Do not try to remove the shield completely. If any beans remain, remove them. Attach the burr grinder release tool (in Welcome Pack) to the upper burr (Fig. 25). If you cannot find this tool call 1-800-220-5701 and we will send the tool to you free of charge.

Turn the tool counter-clockwise slowly until the stone becomes loose. Attention: Do not try to turn the tool clockwise. Fold the shield down and replace the screw. Turn machine on and test the grinder without beans to see if the blockage has disappeared. 15.3 GENERAL CLEANING INSTRUCTIONS Never use abrasive materials or chemicals to clean the machine. Clean the housing with a soft, damp cloth. Rinse water tank daily and fill with fresh cold water. 15.4 EMPTYING THE SYSTEM BEFORE TRANSPORT This procedure is necessary to prevent water and frost damage in case you intend to transport the machine. COFFEE READY Place a container under the Cappuccino system and the Hot Water Spout. Turn the machine off. The main power switch is still on. Press and hold the Rinse button until the display shows SYSTEM EMPTYING A small amount of water is dispensed. When the process is completed the machine turns itself off. The next time the machine is turned on, the display shows FILL SYSTEM/PRESS STEAM (chapter 6c). 15.5 CLEANING THE FROTHXPRESS After frothing a few drops of milk remain inside the frothXpress. The S9 OT displays RINSE CAPPUCCINO. Follow the instructions in chapter 10g. 31.
If you use the frothXpress extensively or forgot to clean it, milk fat starts building up inside the frothXpress. In this case use the Cappuccino Cleaner liquid in the Welcome Pack. Run a CLEAN CAPPUCCINO cycle as follows: COFFEE READY. Push the Rotary Dial until the display shows MAINTENANCE. Push the Dial again, CLEAN CAPPUCCINO. Push the Dial again. CLEANER FOR CAPPU. The Rinse button illuminates. Pour approx. 5 oz. of water into a container and add one capful (15 ml or 1/2oz.) of the Cappuccino Cleaner liquid. Immerse one end of the long milk hose into the cleaning solution and insert the other end into the frothXpress. Turn the frothXpress Dial to the 12 oclock position. Place a container under the frothXpress (Fig. 4). Push the rinse button. CAPPUCCINO CLEANS. The S9 OT siphons the cleaning solution through the frothXpress and stops automatically. When the display shows WATER FOR CAPPUCCINO, remove both containers and empty. Fill fresh water into one container and insert the hose again. Place the other empty container under the frothXpress. Push the Rinse button again. CAPPUCCINO CLEANS. The S9 OT will siphon fresh water through the frothXpress, removing the cleaning solution. COFFEE READY. Squeeze the bottom of the venting tip (Fig. 17a) to make sure it is clean. You can also immerse the frothXpress parts (except the chrome plated face) into a cappuccino cleaner solution as follows:

Remove the frothXpress from the steam nozzle. Take the frothXpress apart (Fig. 17a) and set the chrome plated face aside. Place all parts other parts including the hose in a cup with warm water and add one cap-full (15 ml or 1/2oz.) of the cappuccino liquid. Let sit for ten minutes or overnight. Rinse all parts under fresh water and assemble. 16. AUTOMATIC CLEANING CYCLES 16.1 CLEANING WITH SPECIAL TABLET The machine monitors how many coffees are brewed and how often the rinsing program is activated. After approx. 220 coffees the display shows COFFEE READY / CLEAN MACHINE. You can continue brewing coffee, however we highly recommend that you clean the machine as described below within the next few days. This cleaning program will remove oil build-ups in the brewing chamber. If the display shows CLEAN NOW clean the machine immediately. This cleaning program takes about 20 minutes. Please use the enclosed white cleaning tablet. The machine comes with a pack of 2 tablets. To re-order see chapter 20. Important: Once the cleaning program has started do not interrupt the procedure. COFFEE READY / CLEAN MACHINE 1. Push the Rinse button. DURATION 20 MIN. / START YES. Please note: To clean the S9 OT at a later time, turn the Rotary Dial until the display shows START NO. Push the Rotary Dial to 32.
exit the program. In this case the S9 OT will remind you with the message CLEAN MACHINE. 2. Make sure that the water container is at least half full. 3. Push the Rinse Button. EMPTY TRAY. 4. Remove and empty the tray and the used coffee container and replace. Attention: If the tray and the used coffee container are already empty, you still need to remove the tray for approx. 20 seconds and then replace it. PRESS RINSE. 5. Place containers (20 oz.) under the coffee spout and the frothXpress (Fig. 4) and push the Rinse button (Fig. 2.E). The display shows CLEANS. After a short while you will hear a beep and the display shows ADD TABLET/PRESS RINSE. 6. Open the ground coffee funnel lid and drop one white tablet into the opening (Fig. 22). Close lid. 7. Push the Rinse button. The display shows CLEANS. The machine will start the automatic cleaning program by dispensing water in intervals into the containers underneath the spouts. When finished, the display shows EMPTY TRAY. 8. Remove the tray. There will be water in the tray and in the used coffee container. Empty, clean and replace. The display shows COFFEE READY. 9. Clean the ground coffee funnel. Remove the funnel and rinse under hot water and dry Replace funnel (Fig. 20 and 21). 16.2 MANUAL TABLET CLEANING This program is useful if the brewing process slows down due to excessive oil build-up inside the machine. COFFEE READY. Push and hold the Rotary Dial. MAINTENANCE. Push the Rotary Dial, display shows CLEAN CAPPUCCINO.

Turn the dial until the display shows CLEAN MACHINE and push the dial. The display shows DURATION 20 MIN. / START YES. Continue with the steps 2 through 9 from the chapter 16.1. 17. DECALCIFYING The machine has an integrated decalcifying program. This program takes 45 minutes. When the display shows COFFEE READY / DECALCIFY MACHINE it is time to decalcify the machine. The Rinse button is illuminated. You can still make coffee. However, it is highly recommended to decalcify the machine within the next 3 to 4 days. Please note: If you use the Clearyl water cartridge and the display shows DECALCIFY MACHINE then your cartridge function is not activated. Follow the instructions in chapter 13a to activate the Clearyl Cartridge. If the cartridge is in use for several weeks install a new cartridge. Important: The decalcifying program must not be interrupted. NOTE: Only use our special, square decalcifying tablets Model # 66281, see chapter 20. CAUTION: Never use vinegar or any other decalcifying agent. This might damage internal parts of the machine. CAUTION: Immediately remove any splashes of the decalcifying solution from sensitive surfaces, such as natural stone or wood. CAUTION: If the decalcifying solution comes in contact with the skin, rinse it off with water. If the solution comes in contact with your eyes, see a doctor. Important: Always wait until the decalcifying solution in the water tank has been used up. Do not fill additional decalcifying solution into the water tank. 33.
17.1 DECALCIFYING PROCEDURE COFFEE READY / DECALCIFY MACHINE 1. Push the Rinse button until display shows DURATION 45 MIN. / START YES. Please note: To start at a later time, turn the Rotary Dial to START NO and push the Rotary Dial. The machine will still display COFFEE READY / DECALCIFY MACHINE. 2. Push the Rinse button again, display shows EMPTY TRAY. 3. Remove and empty the tray and the used coffee container and replace, display shows SOLVENT IN TANK. Attention: If the tray and the used coffee container are empty, you must remove the tray for approx. 20 seconds and then replace it. 4. Remove the frothXpress system from the Auto Cappuccino system (Fig. 16). 5. Remove the water container and empty. 6. Completely dissolve 3 of the large square decalcifying tablets in a container with 20 oz. of water (0.6 liters) and pour the solution into the water tank. 7. Replace water tank. SOLVENT IN TANK/PRESS RINSE 8. Place containers under the Auto Cappuccino system and the hot water spout (Fig. 4). 9. Push the Rinse button. The display shows DECALCS and the light in the Rinse button flashes during the operation. The machine pumps the decalcifying solution in intervals through the Cappuccino system and the hot water spout. The display shows decalcifying status in the progress bar. 10. When display shows EMPTY TRAY, remove and empty the containers. Then carefully remove and empty the tray and the used coffee container and replace.

CAPRESSO

Impressa C9

One Touch

Fully Automatic Coffee & Espresso Center with Clearyl Water Care System Operating Instructions and Warranty
Customer Service 1-800-220-5701

Impressa C9 One Touch

IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electric shock and personal injury, do not immerse cord, plugs or appliance in water or other liquids. 4. Close supervision is necessary when any appliance is used by or near children. 5. Unplug from outlet when not in use and before cleaning. Allow it to cool before putting on or taking off parts, and before cleaning the appliance. 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment. 7. The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or personal injury. 8. Do not use outdoors. 9. Do not let the cord hang over the edge of a table or counter, or touch hot surfaces. 10. Do not place on or near a hot gas or electric burner, or in a heated oven. 11. Always attach plug to appliance first, then plug cord into
wall outlet. To disconnect, turn any control to off then remove plug from wall outlet. 12. Do not use appliance for other than intended use. 13. Use extreme caution when disposing hot steam. 14. For household use only.
SAVE THESE INSTRUCTIONS SPECIAL CORD SET INSTRUCTIONS
Regarding your cord set: A. A short power-supply cord (or detachable power-supply cord) is to be provided to reduce risks resulting from becoming entangled in or tripping over a longer cord. B. Longer detachable power-supply or extension cords are available and may be used if care is exercised in their use. C. If a long detachable power-supply cord or extension cord is used, 1) The marked electrical rating of the detachable power supply cord or extension cord should be at least as great as the electrical rating of the appliance, 2) If the appliance is of the grounded type, the extension cord should be a rounding type 3-wire cord, and 3) The longer cord should be arranged so that it will not drape over the counter-top or table-top where it can be pulled on by children or tripped over.
Notice: This machine has a 3-prong grounded plug. To reduce the risk of electrical shock, this plug will fit in an outlet only one way. If the plug does not fit in the outlet, contact a qualified electrician. DO NOT modify the plug in any way.

JURA-CAPRESSO

Jura was founded in 1931 in Switzerland. Capresso was founded in 1994 in the USA. Both companies have joined forces in the US to bring you the finest Fully Automatic Coffee Centers available anywhere. With innovative and user-friendly features, high quality materials, clear instructions and superb customer service, we are sure you will experience the best coffee, espresso, cappuccino or latte you have ever had. We hope you will enjoy your new Fully Automatic Coffee Center and will recommend it to your friends. For more information about our products visit our website www.capresso.com.

6a. FILLING THE WATER TANK Please note: Only use fresh, cold water. Never fill water tank with carbonated water, milk or any other liquid. Remove the water tank, rinse and fill with fresh, cold water. Replace water tank and make sure that it engages securely. 6b. FILLING THE BEAN CONTAINER Please note: To ensure that the conical burr grinder continues to function properly, please avoid using any kind of coated or flavored beans (all coating and flavors contain sugar or sugar substances). Such coating can damage the burrs. Using such beans voids the warranty. Have your coffee store grind the sugar coated beans and use as described in chapter 9d. Flavored Coffee: If you like flavored coffees we recommend adding flavors to your coffee after brewing. This way you can use your regular coffee beans in the bean container. Adding the flavors after brewing lets you control the flavor intensity much better than with pre-flavored coffee. Your local coffee store typically carries a variety of liquid flavors. Open the lid for the bean container and remove the Aroma Protection Lid. Make sure the bean container is empty and clean. Fill beans into the bean container (Fig. 5). Frozen Beans: Thaw 3 to 4 hours before adding to bean container. This prevents moisture from seeping into the grinder. Oily Beans: Beans with an oily surface tend to stick together. This may prevent a continuous flow of beans from the bean container into the burrs. As a result the grinder does not grind enough coffee and you might get weak or no coffee at all. Stir the beans in the bean container just before grinding.
Alternatively, you can also pour the beans into an open bowl and let them sit for about 5 hours. The oils will evaporate (this will not change the taste of your coffee). Then fill the beans into the bean grinder. Now beans will feed into the burrs more easily. 6c. TURNING THE MACHINE ON FOR THE FIRST TIME Make sure bean container and water tank are filled. Press the Main Power Switch in the back of the machine (Fig. 1a) A red light in the left round button cluster illuminates (Fig. 3.4). Push the On/Off button (Fig. 3.1). The display shows PRESS RINSE and the Rinse button (Fig. 3.2) illuminates. Place a cup underneath the Auto Cappuccino System (Fig. 17) and push the Rinse button (Fig. 3.2). SYSTEM FILLING. The machine dispenses a small amount of water. HEATING then PRESS RINSE. Place cup underneath the dual coffee spout (Fig. 17) and press the Rinse button (Fig. 3.2). RINSING. The machine dispenses a small amount of water. READY. Please note: You can only make coffee when the display reads READY. Place a cup under the coffee spout and push one of the coffee buttons. The machine will grind and brew coffee. If the display shows FILL BEANS push one of the coffee buttons again. Discard the first two cups of coffee. You are now ready to brew coffee. 7. ADJUSTING THE GRINDER IMPORTANT: The grinde can only be adjusted while the grinder is actually grinding. Adjust the grinder to the roast of your coffee. 13.

Light roast: use a finer adjustment (smaller dots). Dark roast: use a coarser adjustment (larger dots). Open the cover of the bean container (Fig. 1.9). To adjust fineness, turn the grinding wheel during grinding to the desired position (Fig. 6).
Only the Dual Coffee spouts were used: The C9 OT displays RINSING. For a few seconds hot water will be dispensed through the Dual Coffee Spouts. The C9 OT turns off (display off, red light in left button cluster is on). The Auto Cappuccino Spouts and the Dual Coffee Spouts were used: If the Cappuccino Rinsing cycle was not used (chapter 10g) the C9 OT will first prompt C CLEANING (for "Cappuccino" Cleaning) and the Rinse button illuminates (chapter 15.2). If the Rinse button is not pushed within the next ten seconds, the display shows RINSING and the Dual Coffee Spouts are rinsed. Then the display shows RINSE RIGHT and the Rinse button illuminates. Push the Rinse button. The C9 OT will dispense hot water through the coffee spout of the Cappuccino system, CAPPUCCINO RINSING. The C9 OT turns off (display off, red light in left button cluster is on). 9. COFFEE PREPARATION 9a. PRE-WARM CUPS READY In the morning pre-warm your cups with hot water feature. Cold cups reduce the coffee temperature by 5F to 10F. Place your cup under the Auto Cappuccino system and push the Hot Water button (Fig. 4) WATER. Push the Hot Water button again to stop and discard the water READY.
ATTENTION: Oily beans tend to stick together. Stir beans just before grinding to ensure a proper flow of beans into the burrs. Please note: If coffee does not flow through the Dual Coffee Spouts in a constant stream, turn the wheel to a coarser setting. 8. DAILY PREPARATION Fill the water container every morning with fresh, cold water. This will enhance the taste of your coffee. Make sure the Main Power Switch is on (Fig. 1b). In this case the left button cluster is illuminated. Push the On/Off button (Fig. 3.2). The display shows HEATING. After approx. 2 minutes the display shows PRESS RINSE and the Rinse button illuminates. Push the Rinse Button (Fig. 2,E). Hot water will warm up all internal parts and pump through the coffee spouts RINSING. The water will be caught in the drawer underneath. The rinse cycle stops by itself and the display reads READY. You are now ready to make coffee. 8a. TURNING THE MACHINE OFF / RINSING Always place cups under the Dual Coffee Spouts and the Auto Cappuccino System (Fig. 17). When turning the C9 OT off, the spouts that were used (coffee and/or milk) will be rinsed.
9b. BREWING COFFEE AND ESPRESSO The machine has two pre-set coffee buttons, ESPRESSO (Fig. 3.6) and COFFEE (Fig. 3.5). Both buttons are pre-set for coffee strength, coffee volume and temperature (chapter 5). Brewing one cup: Place one cup underneath the Dual Coffee Spouts and push the desired button. The machine will grind, tamp and then brew the coffee. It uses a 2-step brewing process (pre-brew phase), pauses for a few seconds, and then starts the brewing process. The display shows the name of the button you pushed, e.g. 1 ESPRESSO and the selected coffee strength, e.g. STRONG. The C9 OT will stop automatically and discard the used coffee grounds internally. When the display shows READY, you can brew the next cup of coffee. Brewing two cups: Place two cups underneath the Dual Coffee Spouts and push the desired button twice. The display shows e.g. 2 COFFEES. The C9 OT will brew twice the programmed amount of coffee (e.g. 2 x 5 oz.) and then stop automatically and discard the used coffee grounds internally. READY. Please note: When brewing two cups the C9 OT will always grind the maximum amount of coffee (setting STRONG). Important: After the brewing stops, the machine will discard the used coffee grounds. Please do not try to pull out the drawer (Fig. 20) during this operation. It can seriously damage the machine.There is no need to pull out the drawer until the display shows the message EMPTY TRAY or EMPTY GROUNDS. Please note: You can always stop the brewing process by pressing any of the coffee buttons.

The milk container comes complete with: lid and attached stainless steel hose two short flexible hoses one long flexible hose spare black and transparent fittings (Fig. 14 and 15). The two short hoses have a connecting piece on each end. Unscrew the milk container lid. A stainless steel hose is attached to the inside of the container. A small transparent fitting holds the hose in place (a spare fitting is included). Rinse the milk container with fresh water before first use and fill with fresh cold milk. Close the container. Insert one end of the short flexible hose into the lid opening. Remove the red cap from the side of the frothXpress and insert the other end of the short flexible hose (Fig. 16). You are ready to steam/froth milk. Storing the milk container: always remove the outside flexible hose and unscrew the lid before storing the milk container in the refrigerator. Important: The milk container is not dishwasher safe. Do not immerse the milk container in any liquid. Using the long flexible hose: To siphon milk directly from a milk carton or any other container, use the long flexible hose. Insert one of the black connecting pieces in the straight-cut end of the hose and insert into the frothXpress. Insert the other end with the V-cut into the container with cold milk (Fig. 19). 10b. THE FROTHXPRESS SYSTEM This system produces unlimited volumes of hot steamed or frothed milk right into your cup. Important: This system siphons milk and mixes it inside the frothXpress with hot steam. It is necessary that all parts are connected tightly, otherwise the siphoning process will not work. 16.
Frothing Position: The dial points to the upper part of the face (12 to 2 oclock), which is used for Cappuccino. In the 12 oclock position the frothXpress creates the most milk froth. Turning the dial towards the 2 oclock position increases the milk temperature (Fig. 13). Steaming Position: The dial points to the lower part of the face (4 to 6 oclock) which is used for Latte. Milk will be steamed, not frothed. Turning the dial towards the 4 oclock position increases milk temperature. Steam Only Position: When the dial points to the steam symbol (3 o'clock), the siphoning is blocked. Only steam will pass through the frothXpress. 10c. PREPARING ONE-TOUCH CAPPUCCINO, CAF MOCHA AND LATTE READY. CAPPUCCINO: The frothXpress dial points between 12 and 2 oclock. The thermal milk container is connected. Place your cup underneath the Cappuccino system (Fig. 16) and push the One-Touch Cappuccino button (Fig. 4). The C9 OT starts grinding, the display shows CAPPUCCINO and briefly the coffee strength e.g. STRONG. It then siphons, heats and froths milk for 14 seconds and adds 2 oz. of highpressure brewed coffee (Factory Settings, chapter 5). The display shows READY. Tip: If you use a glass cup you can see how much froth is created and how the coffee sits beneath the layer of milk froth. Slightly stir to distribute the coffee evenly into the hot milk.

CAF MOCHA: use chocolate milk or add chocolate syrup to your cold milk and stir, then proceed as explained before. LATTE: turn the frothXpress dial between the 4 and 6 oclock position and repeat above steps. Milk is steamed without froth. Please note: You can always add an additional shot of espresso by placing your cup under the Dual Coffee Spouts (Fig. 1.1) and pushing the Espresso button. You can also add additional hot milk (chapter 10e). Please note: You can always stop the beverage preparation by pushing any of the beverage buttons. 10d. PREPARING LATTE MACCHIATO This beverage is very popular in Europe. It is normally served in glasses, approx. 4 to 5 inches tall and 2 inches in diameter. READY. The frothXpress dial points to the 12 to 2 oclock position. Place your latte macchiato glass underneath the Cappuccino system and push the Milk button (Fig. 4). The display shows HEATING. When the display shows READY again, push the Milk button again MILK. Milk is siphoned through the system into the cup. When the desired amount of milk is in the cup, push the Milk button to stop. READY. Set the cup aside and wait a few seconds. During this time the milk separates from the milk froth. Move the cup under the Dual Coffee Spouts and push the Espresso button to add a shot of espresso. The coffee settles between the froth and the milk giving the beverage the typical multi-layered, Latte Macchiato look. READY.
10e. PREPARING HOT MILK / HOT CHOCOLATE The Cappuccino System can produce hot milk or hot chocolate without brewing coffee. READY. Connect the milk container to the frothXpress system or use the long flexible hose inserted into any milk container (Fig. 19). Place your cup underneath the Cappuccino system. Push the Milk button (Fig. 4). The display shows HEATING. When the display shows READY, push the Milk button again. MILK. During this time hot steamed / frothed milk is created and delivered into your cup. The flow stops after 30 seconds (factory setting, chapter 5). It can be stopped anytime by pushing the milk button again READY. 10f. OVERRIDING THE CAPPUCCINO AND MILK SETTINGS As with the coffee buttons you can override the pre-programmed volumes of the milk beverage buttons. Example: The factory setting for the Cappuccino button is normal strength, 14 seconds of milk frothing and 2 oz. of coffee. Prepare a one-time special cappuccino, STRONG, more milk froth (20 seconds) and 3.5 oz. of coffee. READY Place your cappuccino cup under the Cappuccino system and open the cover for the Rotary Dial. Turn the Rotary Dial (Fig. 3.8) until the display shows STRONG. Push the Cappuccino Button (Fig. 4). When the frothing starts, turn the Rotary Dial until the display shows 20 SEC. When the coffee brewing starts, turn the Rotary Dial until the display shows 3.5 OZ. When completed READY. If you use the cappuccino button again and do not use the

Rotary Dial, the C9 OT will brew a cup according to the programmed settings for this button. For re-programming see chapter 11 (cup sizes) and chapter 14.1 for cup sizes, temperature and strength. 10g. CAPPUCCINO RINSING In only a few seconds this rinsing program removes milk droplets inside the frothXpress. 10 minutes after preparing a beverage with milk (Cappuccino Button, Milk Button) the C9 OT display shows READY / RINSE CAPPUCCINO and the Rinse button illuminates. You can still continue making beverages. We recommend to perform the cappuccino rinsing. Turn the frothXpress dial to the 3 oclock position (Fig. 13) and place a cup underneath the Cappuccino System. Push the Rinse button. The display shows CAPPUCCINO RINSING. Hot water is pushed through the frothXpress for a few seconds. READY. Turn the frothXpress dial back to your preferred position. IMPORTANT: If you do not use the Cappuccino Rinsing cycle, milk droplets might harden inside the frothXpress, resulting in insufficient frothing performance. 10h. USING HOT WATER The hot water function lets you pre-warm cups, brew tea, make a quick cup of soup, or add hot water to your coffee or espresso to create a milder flavor. READY. Place a cup under the Cappuccino system (Fig. 18). Push the Hot Water button (Fig. 4) WATER.
Push the Hot Water button again to stop. READY. During the hot water release you can override the programmed setting by turning the Rotary Dial to the desired volume. 11. VISUAL PROGRAMMING OF BEVERAGE PORTIONS Chapter 14.1 explains how to re-program all parameters (volume, strength, temperature) for all beverage buttons. Re-programming the cup size for coffee and milk can also be done during beverage preparation as follows. READY. Push and hold the beverage button you want to re-program until display shows ENOUGH COFFEE? or ENOUGH MILK? This way you can make sure your (cappuccino) cup is filled with the desired volume of (milk and) coffee. Example: Visually re-programming the Cappuccino button (Fig. 4). READY. Prepare the Cappuccino Systems (milk container etc.) to make a cappuccino and place your cappuccino cup under the Cappuccino System (Fig. 16). Push and hold the Cappuccino button until display shows ENOUGH MILK? When the desired amount of milk and milk froth is in your cup, push the Cappuccino button again. The display now shows ENOUGH COFFEE? When enough coffee has been added to your frothed milk push the Cappuccino button again. The display briefly shows OK then READY. The next time you push the Cappuccino button, the C9 OT will produce that amount of milk and coffee.

12. WATER CARE The C9 OT works with: tap water bottled water distilled water. We recommend using tap water or bottled water. Distilled water has no minerals and does not improve the taste of coffee. Water that is heated inside the machine leads to calcium deposits. Tap water has a varying degree of water hardness (chapter 12a). Most bottled water has a low level of water hardness. IMPORTANT: do not use carbonated water or any other liquid in the water tank. You have the following options to take care of the water. Decalcifying System (chapter 17.1). The machine is factory pre-set to automatically remind you to decalcify. Clearyl Water Filter Cartridge (chapter 13a). 12a. WATER HARDNESS MONITOR Your C9 OT is set to a water hardness of 10dH and will automatically indicate when it is time to perform a decalcifying cycle. You can change the water hardness setting from 1 to 30dH. If you are not sure about the hardness of your water, ask your local water company for the "Water Hardness in Grains." The machine displays the water hardness in the German hardness scale which is a bit different from the American "Grain" scale (see chart below). You can also use the water hardness indicator strip ("Aquadur" in Welcome Pack) to determine the water hardness: Insert the strip for one second into the water you want to use. Shake off any access water and wait for one minute. One or more sections of the indicator strip will turn reddish. Change the water hardness setting according to the table below. 19.

Display German Degree

Equivalent American Grains
Indicator Strip number of "reddish" fields
INACTIVE* 1. extremely soft water 2. soft water 3. medium water 4. hard water 5. very hard water 6. extremely hard water
1-4 5-9 10-14 15-19 20-24 25-30
1-5 6-11 13-18 19-24 25-30 32-38
None 1 to to to to 5 All 5
Turn the Rotary Dial until the display shows EXIT. Push the Rotary Dial, READY. The machine automatically reminds you when it is time to decalcify (chapter 17.1). Please note: You can set the hardness monitor to INACTIVE. In this case you must use distilled water. In this setting the C9 OT will not remind you to decalcify the machine. 13. CLEARYL WATER FILTER CARTRIDGE The machine comes with one Clearyl Water Filter Cartridge. The Clearyl cartridge Reduces the water hardness up to 75%. Removes (if present) up to 85% chlorine, up to 90% lead, up to 95% copper and up to 67% aluminum. Cleans the water through an upward current principle (Fig. 10) just before the brewing cycle starts, ensuring freshly filtered water every time you make coffee. Lasts for 75 liters (~2,500 oz.) of water or up to two months. Eliminates decalcifying except when using very hard water (25 grains or higher), see chapter 12. In this case we recommended to decalcify the machine once or twice a year. To reorder cartridges, see chapter 20. 13a. INSTALLING & ACTIVATING THE CLEARYL CARTRIDGE Installing: Important: Never install the cartridge before or during "Preparing Machine For The First Time" (chapter 6). Remove cartridge from its bag and rinse cartridge under water. Remove the water tank, make sure it is empty. Pull up the cartridge holder (Fig. 9) and insert the cartridge 20.

*INACTIVE: You can only use this setting for distilled water. Level 5 and Level 6: If the tap water falls into these two categories, decalcifying will be frequent. In this case bottled water is recommended. Most bottled water has a low calcium level. Please note: If your water has a high calcium content (level 5 or 6) and you use the Clearyl Filter Cartridge we recommend to decalcify the machine once or twice a year (chapter 17.2). Please note: If you use Spring or Bottled Water with low calcium levels you can set the hardness to 3dH, "extremely soft water". 12b. CHANGING THE WATER HARDNESS MONITOR READY. Example: Change the hardness setting from 10dH to 20dH Push the Rotary Dial (Fig. 3.8) until display shows RINSE. Turn Rotary Dial until the display shows HARDNESS. Push the Rotary Dial to enter the program. 10 dH Turn the Rotary Dial until the display shows 20 dH. Push the Rotary Dial to confirm the setting. OK
with its tapered end down into the water container (Fig. 10). Make sure it fits inside the fins and push down gently. Close the cartridge holder making sure it snaps into place (Fig. 11). Fill the water tank with fresh cold water and replace. Activating: You must activate the cartridge for the machine to monitor it properly. Otherwise the C9 OT assumes decalcifying mode. READY. 1. Push the Rotary Dial until display shows RINSE. 2. Turn the Rotary Dial until the display shows FILTER and push the Rotary Dial to enter the program NO. 3. Turn the Rotary Dial until YES is displayed and push the Rotary Dial. OK is displayed briefly and then INSERT and the Rinse button illuminates. 4. Place a 20 oz. container under the steam nozzle (Fig. 18). 5. Push the Rinse button FILTER RINSING. For the next 60 seconds the machine will push water through the cartridge and out through the frothXpress system. Initially, the water may have a slight discoloration. The program will stop automatically. The display shows HEATING, then READY. Please note: You can stop the water flow at any time by pushing Rinse button. Empty the container, replace and push the Rinse button to complete the activation process. Please note: As long as the filter is activated, the water hardness setting is automatically turned off. 13b. AUTOMATIC CLEARYL REPLACEMENT The filter is monitored automatically. After approx. 75 liters of water (~2,500 oz.) the display shows READY / FILTER. The Rinse Button will light up.
Important: Once the filter has lost its calcium suppressing abilities, calcium will build up inside the machine. Since the Water Hardness Selector is off, the machine will not remind you when to decalcify. If the filter is not replaced, the calcium buildup will clog and damage your machine. 1. Push Rinse Button CHANGE. 2. Remove the water tank and the old filter. 3. Make sure the water tank is empty. 4. Remove the new cartridge from its bag, rinse under running water and insert in water tank. Fill the water tank with water and replace. Now install as explained in chapter 13a, steps 4 and 5. 13c. MANUAL CLEARYL REPLACEMENT If the filter is more than 2 months old and the display does not indicate to replace filter, replace as follows. READY. Push the Rotary Dial until the display shows RINSE. Push Rotary Dial again, display shows C CLEANING. Turn the Rotary Dial until the display shows FILTER. Push the Rotary Dial CHANGE. Now install as explained in chapter 13a, steps 4 through 6. 13d. DO NOT LET THE CLEARYL FILTER DRY OUT! If the filter is not immersed in water, the granular center will dry out and block any water from passing through. If machine is not used for a few days, leave some water in the water tank so the filter will not dry out. Upon using the machine again, fill the water tank with fresh water and process approx. 2 oz. of water through the hot water spout. 21.

If the machine will not be used for a longer period of time, empty the water container and remove the CLEARYL filter. Fill a glass with at least 2 inches of water and immerse the filter. Place the glass in the refrigerator. When you use the machine again, install the filter. 14. PROGRAMMING The C9 OT provides programming, rinse and look-up functions. READY. Push the Rotary Dial until display shows RINSE. Turn the Rotary Dial clockwise to access the following functions: Chapter RINSE.15.1 BUTTONS.14.1 (beverage buttons) FILTER - or .13a HARDNESS.12b If "FILTER ", this function is suppressed. ENERGY.14.3 TIME.14.4 UNIT ON.14.5 OFF AFTER.14.6 INFO.14.7 DISPLAY.14.8 LANGUAGE.14.9 EXIT Please note: to get back to READY, turn the Rotary Dial until the display shows EXIT, then push the Rotary Dial. 14.1 RE-PROGRAMMING BEVERAGE BUTTONS (BUTTONS) This program allows you to change all parameters for all beverage functions. The following parameters can be changed: Coffee volume (WATER): for all coffee / cappuccino buttons from 0.5 to 8 oz.
(Note: for 2-cup brewing the volume will automatically double). Coffee strength (STRENGTH) for all coffee / cappuccino buttons choose from three settings, MILD, NORMAL, STRONG. Temperature: for all coffee drinks the temperature can be set to NORMAL or HIGH. MILK: steaming can be set from 3 to 120 seconds. HOT WATER PORTION: can be set from 0.5 to 15 oz. Example 1: Re-program the Coffee button to: 4 ounces of coffee, mild, normal temperature. READY. 1. Push the Rotary Dial until the display shows RINSE. 2. Turn the Rotary Dial to BUTTONS and push the Rotary Dial. The display shows SELECT BUTTON. 3. Push the COFFEE button (Fig. 3.5). The display shows WATER (here this means coffee volume). 4. Push the Rotary Dial 5.0 OZ. and turn the dial until the display shows 4.0 OZ. 5. Push the Dial to confirm: OK then WATER. 6. Turn the Rotary Dial until the display shows STRENGTH and push the Dial, NORMAL. 7. Turn the Rotary Dial until the display shows MILD and push the Dial, OK, then STRENGTH. 8. Turn the Rotary Dial until the display shows TEMP. and push the Dial, HIGH. 9. Turn the Dial until the display shows NORMAL and push the Dial to confirm, OK, then TEMP. 10. Turn the Rotary Dial until the display shows EXIT and push the Rotary Dial. BUTTON. 22.
If you do not want to change another button, turn the dial until the display shows EXIT and push the Rotary Dial: READY. Example 2: Re-program the Cappuccino button to: 3.5 oz. of coffee, strong, milk for 20 seconds, temperature stays at HIGH. READY. 1. Push the Rotary Dial until the display shows RINSE. 2. Turn the Rotary Dial to BUTTONS and push the Rotary Dial. The display shows SELECT BUTTON. 3. Push the CAPPUCCINO button. The display shows MILK. 4. Push the Rotary Dial, 14 SEC, and turn the dial until the display shows 20 SEC. 5. Push the Rotary Dial to confirm: OK then MILK. 6. Turn the Rotary Dial until display shows WATER (here it stands for coffee volume) and push the Dial, 2.0 OZ. 7. Turn the Rotary Dial until the display shows 3.5 OZ and push to confirm, OK then WATER. 8. Turn the Rotary Dial until the display shows STRENGTH and push the Dial, NORMAL. 9. Turn the Dial until the display shows STRONG and push the Dial, OK, then STRENGTH. 10. Turn the Rotary Dial until the display shows EXIT and push the dial. BUTTONS. If you do not want to change another button, turn the dial until the display shows again EXIT and push the Dial: READY. In the same way you can change the Espresso, the Milk and the Hot Water button.

14.2 RESTORING FACTORY SETTINGS FOR BEVERAGE BUTTONS You can reset the beverage buttons back to the factory setting as follows: The machine is plugged in. Only the main power switch in the back of the machine is on. The display is blank. Example: reset the Espresso button. Open the cover of the Rotary Dial. Push and hold the Rotary Dial and then push the Espresso button for two seconds. The display shows OK. The factory setting (chapter 5) has been restored. 14.3 ENERGY SAVING MODE You can set the machine to two different modes. SAVE The C9 OT is always ready to brew coffee and dispense hot water. The C9 OT heats up for steaming/frothing for milk or when preparing cappuccino. SAVE Approx. 5 minutes after the last beverage was made, the C9 OT switches to energy saving mode. When making coffee at a later time, the C9 OT will first heat up for 5 to 30 seconds. 14.4 SETTING THE ACTUAL TIME Setting the time allows you to program an "auto-on" time. Example: Set the time to 7:15 AM. Push the Rotary Dial until the display shows RINSE. Turn the Dial until the display shows TIME, push the Dial --.--. Turn the Dial to select the hours 7:00 AM and push to confirm. Now turn the Dial to set the minutes: 7:15 AM. Push the Dial to confirm. OK, then TIME. Turn Dial to EXIT and push to get back to READY. 23.
Please note: For Daylight Saving you have to re-set the time. Please note: When the main power switch in the back of the machine is turned off or if your home has a power outage, the time setting is lost and has to be re-set as explained above. 14.5 AUTO-ON You can set a time at which the machine automatically turns on and is ready to make coffee. Please note: "Auto-On" will only work if the actual time is set and the main power switch (Fig. 1b) is turned on. Example: Set the Auto-on time to 6:15 AM. Push the Rotary Dial until the display shows RINSE. Turn the Dial until display shows UNIT ON and push Dial --.--. Turn the Dial to select the hours 6:00 AM and push to confirm. Now turn the Dial to set the minutes: 6:15 AM. Push the Dial to confirm. OK, then UNIT ON. Turn Dial to EXIT and push to get back to READY. 14.6 AUTO-OFF The C9 OT is pre-set to turn itself off 2 hours after last use. You can change the auto-off interval between 0.5 and 15 hours or you can set the machine not to turn itself off. Recommendations: If you only use the machine in the morning dont change the setting. If you use the machine all day long change the auto-off to 5 hours after last use Example: Change the auto-off from 2 to 5 hours after last use. Push the Rotary Dial until the display shows RINSE. Turn the Rotary Dial until the display shows OFF AFTER. Push the Dial 2 HRS. Turn the dial until display shows 5 HRS and push to confirm, OK then OFF AFTER.
Turn the dial to EXIT and push READY. 14.7 INFORMATION In this program you can look up: how many coffees you produced with the individual beverage buttons, how often cleaning, filter change and descaling programs were performed, how close the C9 OT is to the next tablet cleaning program. 14.8 DISPLAY SETTINGS (AM/PM / OZ) This function lets you select the time format AM/PM or 24 HR format and the volume either in ounces OZ or milliliters ML. READY. Push the Rotary Dial until the display shows RINSE. Turn the Dial until the display shows DISPLAY and push to get into the program to change the formats. 14.9 LANGUAGES You can change the display from English to French, Portuguese, German, Italian, Dutch or Spanish. READY. Push the Rotary Dial until the display shows RINSE. Turn the Dial until the display shows LANGUAGE and push to get into the program to change the formats. NOTE: All commands like READY, LANGUAGE, EXIT are shown in the language you choose. 15. CARE AND MAINTENANCE MESSAGES The machine will automatically display messages. In some cases the message allows you to continue to brew coffee. In other 24.

cases no further coffee brewing is possible before the task has been completed. PRESS RINSE Push the Rinse button (Fig. 3.2). The machine pumps hot water through the coffee spouts or fills the system initially (chapter 6c) or continues a cleaning program. FILL WATER TANK The water tank is almost empty. Add water before resuming brewing coffee. EMPTY GROUNDS or EMPTY TRAY When this message appears, you must empty the used coffee grounds from the used coffee container and the water from the drawer. Make sure the Dual Coffee Spouts are moved upwards. Carefully remove the drawer (Fig. 20, 21, 22). TRAY MISSING. Empty the drawer and the used coffee container, assemble and replace READY. Please note: If the machine is not used for a few days, pull out the tray and empty the used coffee container. Used, moist coffee grounds can develop mold and mildew. Important: If you pull out the drawer without any corresponding message in the display you must empty the used coffee container. The machine assumes that it will be emptied. If you do not empty the container, used coffee overflows inside the machine and causes serious damage to the coffee release mechanism. Please note: The machine does not sense if the used coffee container (Fig. 2.19) is inserted. If the used coffee container is not inserted, ground coffee discharges into the drawer. TRAY MISSING Insert the drawer with the empty used coffee container. FILL BEANS: Add beans to the bean container.
READY / CLEAN After approx. 200 coffee brewings or 80 initial rinsing cycles you must run a tablet cleaning cycle. You can still make coffee, however we highly recommend to perform the cleaning cycle within the next few days (chapter 16.1). READY / DE-SCALE It is time to decalcify the machine. You can still make coffee, however we highly recommend to perform the decalcifying cycle within the next few days (chapter 17.1). Please note: If you use the Clearyl cartridge and the message appears, then your cartridge function was not activated. Follow the instruction in chapter 13a to program and activate the cartridge. If the cartridge is already in use for several weeks install a new cartridge. READY / FILTER It is time to replace the Clearyl filter (chapter 13b). NOT ENOUGH PRE-GROUND Not enough pre-ground coffee was filled into the ground coffee funnel (Fig. 1.7). The C9 OT stops the operation (chapter 9d). 15.1 MANUAL RINSE CYCLES The C9 OT will display when its time to perform certain cleaning programs. You can also manually access these programs and perform them. READY. Push the Rotary Dial until the display shows RINSE. Push the Dial again, C-CLEANING (for cappuccino cleaning) Turning the dial shows which maintenance programs can be accessed: C-CLEANING (chapter 15.2) FILTER (chapter 13c); manual Clearyl filter replacement 25.
CLEAN (chapter 16.1); manual tablet cleaning C-RINSE (chapter 10g); manual cappuccino rinsing. RINSE (see example below in chapter 15.1). DE-SCALE MACHINE (chapter 17.1). If you push the Rotary Dial to enter one of the above programs, the display guides you through the necessary steps. Please note: If the display shows RINSE and you do not select one of the above programs within five seconds, the C9 OT will return to READY. Example: Run a manual hot water rinse cycle. READY. Push the Rotary Dial until the display shows RINSE. Push the Dial again, C-CLEANING. Turn the Dial until the display shows RINSE. Place a cup under the Dual Coffee Spouts. Push the Rotary Dial. The C9 OT will push hot water through the Dual Coffee Spouts and then return to READY. 15.2 C CLEANING (Cappuccino Cleaning) This message appears when turning the machine off and you have used the Cappuccino or Milk button. The Rinse button illuminates. If you push the Rinse button, the machine starts the Cappuccino Cleaning program. See steps 2 through 9 below. You can also access this program at any time as follows: 1. READY. Push the Rotary Dial until the display shows RINSE. 2. Push the Dial again, C-CLEANING. 3. Push the Dial again, CAPPUCCINO CLEANER. 4. Pour approx. 8 oz. of fresh water into a container and immerse the long hose from the frothXpress.

Your machine needs to be returned for service. ERROR 2, ERROR 4 Your machine is too cold. The heating sensor does not react. Turn the machine off. Keep the machine at normal room temperature (65 F or higher) for 2 hours. Then turn it on again. If display still shows ERROR 2 or ERROR 4 call customer service. ERROR 6, ERROR 7, ERROR 8 Turn machine off, turn the main power switch off and unplug machine for a minute. Turn machine on again. If the error message comes up again, try one more time. If the message persists, call customer service. TROUBLESHOOTING: A. NO COFFEE COMES OUT OF THE COFFEE SPOUT Problem: Beans in bean container are not feeding properly into the grinder because they are stuck together. Solution: Stir beans before grinding and while grinding turn the grinding selector to the coarsest setting. When using very oily beans pour the beans onto a plate and let some of the sticky oils evaporate (this will not harm the aroma of the coffee). Problem You used ground coffee in the ground coffee funnel. The ground coffee was too fine. Solution: Use ground coffee which is ground somewhat coarser. Problem No water is transported through the system. Solution: Remove water container and make sure that the con29.
necting valve is free of any particles (like a coffee bean etc). Problem The ground coffee funnel is clogged; the internal brewing chamber is clogged. Solution: Place a large cup underneath the coffee spout. Run one or more manual hot water rinse cycles as explained in chapter 15.1. Never fill more than 2 scoops of coffee in the ground coffee funnel; the funnel is not a storage area for ground coffee. Also, use a ground coffee which is ground somewhat coarser. B. THE DISPLAY READS "FILL WATER TANK" BUT THERE IS ENOUGH WATER IN THE WATER TANK. Problem The floatation device (Fig. 7.4) is stuck or missing. Solution: Clean the water container and make sure the floatation device moves freely. Solution: Within the water tank is a small compartment (like a mouse trap). Inside is a small black floatation device. On top is a small clear see-through plastic cover. This small plastic cover is missing and the floatation device is outside of the small compartment. Check if you can find both pieces inside the water tank and put it back together. If you cannot find the pieces call 1-800-220-5701. We will send the pieces FREE OF CHARGE. C. INSUFFICIENT FROTHED MILK PRODUCTION Problem Milk is initially not cold enough or your milk is not suited for thick frothing. Solution: Make sure milk is cold. Use a different type of milk. Skim milk will produce the thickest and longest lasting froth. Full fat milk will produce less thick froth. Problem: The components of the frothXpress are not assembled properly, or the components are clogged with hardened milk, or one or more of the components are missing.

Solution: a. Remove frothXpress. Check that steam comes out of the steam nozzle. Place a cup underneath the steam nozzle and use the milk function (chapter 10e). CAUTION: hot steam is dispensed from the steam nozzle. If no steam is released stop the milk function and use a needle to clear blockage inside the steam nozzle. b. Clean all frothXpress parts and assemble properly (chapter 15.2). c. If any parts are missing call: 1-800-220-5701. D. GRINDER MAKES AN EXTREMELY LOUD NOISE; NO BEANS ARE GROUND Problem: A stone or object is blocking the burr grinder. Solution: Call customer service: 1-800-220-5701. E. THE REMOVABLE DRAWER CANNOT BE INSERTED (Fig. 22) Solution: Turn off the machine and wait approximately one minute. Insert the drawer with the tray but without the used coffee container. Turn machine on and wait until it stops making any noise. Now pull out the drawer and add the used coffee container. Insert the entire assembly into the machine. 20. SUPPLIES The following supplies are necessary to keep your machine in good working order: Clearyl Water Filter Cartridge (one included). Model #64553; the machine will remind you automatically. Tip: If you brew 10 cups a day you need about one Clearyl cartridge per month. Always keep extra cartridges available. Special Cleaning Tablets (two included) Model #62205. Tip: If you brew 10 cups a day you need about one tablet
every 3 weeks. Always keep extra tablets available. Auto-Cappuccino Cleaner ( sample included). Model #63801 Tip: If you use the auto cappuccino cleaner every other day you need a new bottle every 5 weeks. Decalcifying tablets (large square tablets) - Model #66281. Please note: You must use decalcifying tablets if you do not use the Clearyl cartridge. You can order these supplies: with the enclosed mail order form or through our website www.capresso.com or by calling our customer service center at 1-800-220-5701. 21. LIMITED TWO-YEAR WARRANTY
Please note: This warranty will be void if the Warranty / Product Registration has not been received two weeks after the purchase date (you can fax or mail the registration or you can register through our website www.capresso.com) This limited warranty covers your new Jura-Capresso C9 One-Touch Series for two years or up to 6,000 coffee brewings, whichever comes first. This warranty is in effect for the period and usage described above from the date of the first purchase and is limited to the United States of America. This warranty covers all defects in materials or workmanship (parts and labor) including free UPS ground transportation for both ways within the continental United States. For Hawaii and Alaska freight is not covered by this warranty. In case the machine cannot be repaired, JURA-CAPRESSO will replace your machine with the same model with the same or less usage. In case we cannot replace your machine with the same model we will replace it with a model of the same or higher retail value with the same or less usage. Usage is defined by the number of coffees the machine has made when sent for repair. TRANSPORT: When sending the machine, use the original packing, the inner and outer cartons or use approximately 2 of bubble wrap and insert machine in a carton which will hold 40lbs. Any damage in transit is NOT covered by this warranty. THIS WARRANTY DOES NOT COVER: Any machine NOT distributed by JURA-CAPRESSO within the United States.