IMPRESSA Xs90 / Xs95

Instructions for use

Legend:
DISPLAY: serves as information. DISPLAY: please follow the instructions shown. = Note = Important = Tip

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 6

Fig. 7

Fig. 8

Fig. 9

Fig. 10

Fig. 11

Fig. 12

Fig. 13

Fig. 14

Fig. 15

Description of the machine
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. Drip tray Drip grate Programming door Rotary Switch Selection key for pre-ground coffee Coffee la Carte key 1 Coffee key 2 Coffees key 1 Espresso key 2 Espressos key ON / OFF key Rinse key Display dialog system Water tank with handle Aroma preservation cover Bean tank cover Lid for pre-ground coffee filler funnel Height-adjustable coffee spout Heatable cup shelf Constant Steam key Steam Portion key Hot Water switch Pivoting steam spout 2-stage frothing jet Height-adjustable hot water spout Coffee grounds bin Power switch

Contents

1. Safety information...page 1.1 Warnings..page 1.2 Precautions...page 2. Before you start using the IMPRESSA..page 2.1 Checking the mains voltage.page 2.2 Checking electrical fuse.page 2.3 Filling the water tank..page 2.4 Filling the bean tank..page 2.5 Adjusting the grinding gear.page 2.6 Power switch..page 3. First use...page 3.1 Cup illumination..page 4. Adjusting your machine to the water hardness.page 5. Using a CLARIS plus filter cartridge.page 5.1 Installing the filter..page 5.2 Changing the filter..page 6. Rinsing the machine..page 7. Making coffee (1 espresso, 2 espressos, 1 coffee, 2 coffees)...page 7.1. Making coffee with pre-ground coffee powder.page 8. Making coffee la carte..page 9. Making hot water..page 10. Drawing off steam..page 11. Frothing milk...page 11.1 Frothing one portion of milk (with the 2-stage frothing jet)..page 11.2 Frothing milk (with the 2-stage frothing jet)..page 11.3 Attaching the Professional-Cappuccino Frother to the IMPRESSA..page 11.4 Making cappuccino and hot milk with the Professional-Cappuccino Frother.page 11.5 Cleaning the Professional-Cappuccino Frother and jet..page 12. Switching the IMPRESSA off..page 13. Programming...page 13.1 Programming the filter.page 13.2 Programming your machine to the correct water hardness (only with FILTER NO).page 16. 17. 18. 19. 20. 21. 22.
Maintenance..page Programming the amount of powder for coffee and espressso..page 13.5 Setting the amount of water for coffee, espresso and coffee la carte.page 13.6 Programming the temperature for coffee, espresso and coffee la carte.page 13.7 Programming the water portion.page 13.8 Programming the steam portion..page 13.9 Economy mode..page 13.10 Setting the time..page 13.11 Programming the automatic switch-on time.page 13.12 Programming the automatic switch-off time..page 13.13 Programming the language.page 13.14 Programming the display..page 13.15 Information...page Lock functions..page 14.1 Locking/releasing the drawing of coffee la carte..page 14.2 Locking the programming function..page Maintenance..page 15.1 Filling the water tank..page 15.2 Emptying the coffee grounds..page 15.3 Emptying the drip tray..page 15.4 Drip tray missing..page 15.5 Filling the bean tank..page 15.6 Removing stones from the grinding gear..page 15.7 Changing the filter..page 15.8 Prompt to run cleaning cycle.page 15.9 Prompt to run decalcifying cycle..page 15.10 Emptying the system..page 15.11 General cleaning instructions.page Cleaning...page Decalcifying..page Disposal..page Tips for perfect coffee..page Problems...page Legal information..page Technical data..page 13.3 13.4

Before you begin

Congratulations on having bought this IMPRESSA! In order to ensure perfect operation of your IMPRESSA, carefully read this operating manual and keep it for future reference. Should you need more information or meet with particular problems not specified in these operating instructions in sufficient detail, please contact JURA Elektroapparate AG directly or your local authorized dealer. You will also find useful tips on operation and maintenance of the machine on our website at www.jura.com. Dont forget to check out the knowledge builder our animated operating instructions. LEO, our assistant, will take you through all the functions.
Never immerse the IMPRESSA in water.

1.2.Precautions

Never expose the coffee machine to weather (rain, snow, frost), never touch the machine when your hands are wet. Place the IMPRESSA on a firm, level base that is resistant to any water that may leak. Never stand on hot or warm surfaces (oven hobs). Keep out of the reach of children. If you intend not to use the machine for a longer time (holidays, etc.), always turn off the power switch. Always turn off the power switch before cleaning the machine. When disconnecting the mains cable, never pull on the mains cable or the machine itself. The IMPRESSA is connected to the mains supply via a mains cable. Make sure nobody can trip over the mains cable. Keep out of reach of children and pets. Never put the coffee machine or parts of it into a dishwasher. Make sure to install the machine at a place with sufficient air circulation to prevent it from overheating.

3. First use

Press the power switch (27) on the back (bottom left) of the machine (Fig. 3). The ON / OFF key (11) lights up to indicate that the machine has been switched on with the power switch. Switch the machine on using the ON / OFF key (11). The light of the ON / OFF key goes off. Open the programming door (3). LANGUAGE ENGLISH Turn the Rotary Switch (4) until the required language is displayed. Example: LANGUAGE ENGLISH Confirm your selection by pressing the Rotary Switch (4). FILL SYSTEM / PRESS STEAM
2.5 Adjusting the grinding gear
You can adjust the grinding gear to the roast of your coffee. We recommend that you use: a finer setting for a lighter roast a coarser setting for a darker roast The grinding degree may only be adjusted while the grinding gear is running.
Place a receptacle under the 2-stage frothing jet (24) and press one of the Steam keys. The system now fills up automatically. A little water will leak from the frothing jet. SYSTEM FILLING HEATING UP PRESS RINSE Place a cup under the height-adjustable coffee spout (18). Press Rinse. MACHINE RINSING Now the water lines are flushed with fresh water. A little water will leak from the coffee spout (18). SELECT PRODUCT You can now make a product of your choice by pressing the corresponding key. If FILL BEANS appears on the display, press one of the coffee product keys again. The grinder is not yet completely filled with coffee beans. For a perfect frothing result, adjust the height-adjustable coffee spout (18) to the size of your cup (Fig. 4).
4. Adjusting your machine to the water hardness
The IMPRESSA heats up water. As a result, calcification occurs during normal use. This is indicated automatically. The IMPRESSA must therefore be adjusted to the hardness of the water used. Use the supplied test sticks to determine the water hardness or contact your local waterworks. 1 German hardness is equivalent to 1.79 French hardness. The water hardness programming step is no longer displayed if the filter is activated. The IMPRESSA is preset to 16dH. This setting can be changed. To do so, proceed as follows: SELECT PRODUCT Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal. FILTER NO Turn the Rotary Switch (4) until the following message is displayed: HARDNESS 16dH Now press the Rotary Switch (4) to start programming. 16dH Now turn the Rotary Switch (4) until the required water hardness is set. 20dH (example) Confirm the selected setting by pressing the Rotary Switch (4). HARDNESS 20dH (example)

Fill the water tank (14) with cold, fresh tap water and place it back into the machine. Place a sufficiently large receptacle (min. 0.5 litres) under the pivoting steam spout (23) and press one of the Steam keys to start the filter rinsing process. FILTER RINSING Filter rinsing stops automatically. SELECT PRODUCT You can also trigger a change of filter manually from the Maintenance menu at any point in time (only if the filter has been activated) - see Chapter 13.3.
process (I.P.B.A.S.) moistens the coffee powder, briefly interrupts the flow of hot water and then begins with the actual brewing process. 1 ESPRESSO (example) NORMAL (example) The coffee brewing process stops automatically as soon as the set amount of water has run through. SELECT PRODUCT To stop the brewing process prematurely, press any of the product keys. You can change the amount of water while the machine is brewing coffee. Open the programming door. Turn the Rotary Switch (4) until the display indicates the required amount (ML). The amount of water can be selected in increments of 5 ML. The amounts given in ML are approximate values and may vary from the effective quantity.

6. Rinsing the machine

If the coffee machine is switched off and has cooled down, you will be prompted to start a rinsing cycle when switching the machine back on. The rinsing cycle starts automatically when you switch the machine off. PRESS RINSE Place a cup under the coffee spout (18). Press Rinse. MACHINE RINSING SELECT PRODUCT You can also trigger a rinsing cycle manually from the Maintenance menu at any point in time (see Chapter 13.3).
7.1. Making coffee with pre-ground coffee powder
Never use water-soluble instant coffee. SELECT PRODUCT Place 1 or 2 cups (as required) under the coffee spout (18) and open the programming door (3). Press the selection key for preground coffee. FILL POWDER / SELECT PRODUCT Now fill 1 or 2 level scoops of pre-ground coffee into the filler funnel for pre-ground coffee (17). Then press a product key of your choice.
7. Making coffee (1 espresso, 2 espressos, 1 coffee, 2 coffees)
SELECT PRODUCT Place 1 or 2 cups (as required) under the coffee spout (18) and press a key of your choice , , ,. The pre-brewing

1 ESPRESSO (example) POWDER The coffee brewing process stops automatically as soon as the set amount of water has run through. SELECT PRODUCT To stop the brewing process prematurely, press any of the product keys. We recommend always using powder from fresh coffee beans or pre-ground, vacuum-packed coffee. Never fill in more than 2 scoops of powder. The filler funnel is no storage tank. Make sure the coffee powder you use is not too fine. This may block the system and cause the coffee only to drip out of the coffee spout. If you have pressed the selection key unintentionally, press any of the product keys to cancel your selection. You can change the amount of water while the machine is brewing coffee. To do so, turn the Rotary Switch (4) until the display indicates the required amount (ML). The amount of water can be selected in increments of 5 ML. The amounts given in ML are approximate values and may vary from the effective quantity.
Turn the Rotary Switch (4) until the display indicates the desired coffee strength and press the Rotary Switch (4) to make the coffee. The pre-brewing process (I.P.B.A.S.) moistens the coffee powder, briefly interrupts the flow of hot water and then begins with the actual brewing process. A LA CARTE XSTRONG (example) The coffee brewing process stops automatically as soon as the set amount of water has run through. SELECT PRODUCT To stop the brewing process prematurely, press any of the product keys. You can change the amount of water while the machine is brewing coffee. To do so, turn the Rotary Switch (4) until the display indicates the required amount (ML). The amount of water can be selected in increments of 5 ML. The amounts given in ML are approximate values and may vary from the effective quantity.

9. Making hot water

SELECT PRODUCT Place 1 cup or 1 glass under the hot water spout (25) and turn the Hot Water switch (22) to. WATER PORTION The machine stops dispensing water automatically as soon as the set amount of water has been dispensed. CLOSE TAP Turn the switch (22) back to. SELECT PRODUCT
8. Making coffee la carte
SELECT PRODUCT Place 1 cup under the coffee spout (18) and open the programming door (3). Press the Coffee la Carte key. A LA CARTE XMILD
To stop the process prematurely, turn the switch (22) back to. You can also change the amount of water set while the machine is brewing coffee. Open the programming door. Turn the Rotary Switch (4) until the display indicates the required amount (ML). The amount of water can be selected in increments of 5 ML. The amounts given in ML are approximate values and may vary from the effective quantity.
Place a cup under the pivoting steam spout (23) and dip the 2-stage frothing jet (24) in the milk to be frothed or the liquid to be heated. Press the Steam Portion key. STEAM PORTION You can stop the process any time by pressing the Steam Portion key. SELECT PRODUCT You can set the duration of drawing off steam in 1-second increments with the Rotary Switch (4).

10. Drawing off steam

Make sure the nozzle has engaged properly. If the nozzle is clogged with dried milk or has not been attached properly, it might suddenly come off during operation. To ensure perfect operation, clean the 2-stage frothing jet (24) regularly. Use the opening provided on the handle of the measuring spoon for the purpose to unscrew the 2-stage frothing nozzle (Fig. 14). Thoroughly rinse the 3 parts under running water. Steam can be used for heating liquids and frothing milk for cappuccino. When heating liquids, make sure the 2-stage frothing jet (24) is pushed up. To froth liquids, push the 2-stage frothing jet (Fig. 5) downwards, turning it slightly. A small amount of water leaks from the jet when you start frothing. This does not affect the result, e.g. when frothing milk. There might be some initial splashing when drawing off steam. The steam jet gets hot. Avoid direct contact with the skin!

11. Frothing milk

The IMPRESSA is ready to froth milk when both Steam key lights light up constantly. If the lights are off, press one of the two Steam keys.
11.1 Frothing one portion of milk (with the 2-stage frothing jet)
SELECT PRODUCT Pour milk into a jug or similar receptacle. Dip the 2-stage frothing jet (24) into the milk and press the key. STEAM PORTION The steam dispensing process stops automatically.
11.2 Frothing milk (with the 2-stage frothing jet)
SELECT PRODUCT Pour milk into a jug or similar receptacle.

SELECT PRODUCT

Dip the 2-stage frothing jet (24) into the milk and press the key. DRAW OFF STEAM When you have frothed the milk to your liking, pres the key again.
11.5 Cleaning the Professional-Cappuccino Frother and jet
After heating or frothing milk, you should clean the Professional-Cappuccino Frother. We recommend cleaning it on a daily basis. Your IMPRESSA will not prompt you to clean the Professional-Cappuccino Frother. The Professional-Cappuccino Frother and the Easy-Cappuccino Frother are best cleaned using the JURA Auto-Cappuccino cleaner. Please contact an authorized dealer. We recommend cleaning these devices daily. Fill water into a receptacle and dip the milk hose into it. Draw steam until the water / steam from the Frother runs clear. We also recommend regularly disassembling the Frother and rinsing it under running water. Remove the Professional-Cappuccino Frother from the IMPRESSA and take it apart as shown in Fig. 8. Thoroughly rinse all the parts of the Professional-Cappuccino Frother under running water. Re-assemble the Professional-Cappuccino Frother and attach it to your IMPRESSA.
11.3 Attaching the Professional-Cappuccino Frother to the IMPRESSA
Remove the 2-stage frothing jet (24). Now attach the Professional-Cappuccino Frother (Fig. 6). Press the hose into one side of the opening behind the dial (Fig. 7).

11.4 Making cappuccino and hot milk with the Professional-Cappuccino Frother
Fill the milk pitcher with milk or dip the milk hose directly into the milk. Place a cup under the Professional-Cappuccino Frother. Press the Steam Portion key. STEAM PORTION The machine will froth or heat milk according to the time you programmed (see Programming the steam portion, Chapter 13.8) For cappuccino, turn the selector switch (1, Fig. 7) to (2). For hot milk, turn the selector switch (1, Fig. 7) to (3). Now place the cup with the cappuccino froth or hot milk under the coffee spout (18) and make a coffee of your choice.
12. Switching the IMPRESSA off
Switching the IMPRESSA off causes the coffee spout to be rinsed first. Therefore, please make sure to place a suitable receptacle under the coffee spout (18). SELECT PRODUCT Switch the IMPRESSA off with the ON / OFF key
MACHINE RINSING The coffee spout (18) is rinsed.

13.3 Maintenance

You can activate the following maintenance functions from this program item: RINSE MACHINE, CLEAN MACHINE, DE-SCALE MACHINE, CHANGE FILTER. DE-SCALE machine is not displayed if you are using a CLARIS plus filter and the filter is set to YES. CHANGE FILTER is not displayed if you are not using a CLARIS plus filter and the filter is set to NO. SELECT PRODUCT Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal. FILTER NO or YES Turn the Rotary Switch (4) until the following message is displayed: RINSE Now press the Rotary Switch (4) to start programming. RINSE MACHINE Turn the Rotary Switch (4) until the required maintenance function (for selection see above) is displayed. Press the Rotary Switch (4) to activate the function. The Maintenance menu closes automatically after 5 seconds if no function is selected.

13. Programming

The IMPRESSA leaves the factory with a number of default settings that allow you to make coffee without having to program the machine first. You can, however, adjust various parameters to make the coffee suit your personal taste. The following parameters can be adjusted: Filter Water hardness Rinse Powder quantity Water quantity Temperature Water portion Steam portion Economy mode Time Automatic switch-on time Automatic switch-off time Language Display Information (to be viewed only)
13.1 Programming the filter
Please refer to Chapter 5 Using the CLARIS plus filter cartridge.
13.2 Programming your machine to the correct water hardness (only with FILTER NO)
Please refer to Chapter 4 Adjusting your machine to the water hardness.
13.4 Programming the amount of powder for coffee and espresso

13.7 Programming the water portion
The systems basic settings include a pre-defined amount of water (225 ml). However, this amount can be modified as required. SELECT PRODUCT Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal. FILTER NO or YES Turn the Rotary Switch (4) until the following message is displayed: WATER PORTION Press the Rotary Switch (4) to activate the program item. PORTION 225 ML (example) Turn the Rotary Switch (4) to adjust the amount of water and then confirm your setting by pressing the Rotary Switch (4). WATER PORTION Turn the Rotary Switch (4) until the following message is displayed: EXIT Press the Rotary Switch (4) to leave the programming mode. SELECT PRODUCT
13.8 Programming the steam portion
The systems basic settings include a pre-defined steam portion (20 sec.). However, this amount can be modified as required. SELECT PRODUCT Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal.
FILTER NO or YES Turn the Rotary Switch (4) until the following message is displayed: STEAM PORTION Press the Rotary Switch (4) to activate the program item. PORTION 20 SEC (example) Turn the Rotary Switch (4) to modify the steam portion and then confirm your setting by pressing the Rotary Switch (4). STEAM PORTION Turn the Rotary Switch (4) until the following message is displayed: EXIT Press the Rotary Switch (4) to leave the programming mode. SELECT PRODUCT
Now press the Rotary Switch (4) to start programming. ECONOMY MODE Now turn the Rotary Switch (4) until the required economy mode is displayed. ECONOMY MODE 2 (example) Confirm the selected setting by pressing the Rotary Switch (4). ECONOMY MODE 2 (example) Now turn the Rotary Switch (4) until the following message is displayed: EXIT Now press the Rotary Switch (4) to leave the programming mode. SELECT PRODUCT

Economy mode

Selecting this level puts the IMPRESSA in constant stand-by mode. This setting allows you to make any of the products without having to wait for the machine to heat up. Select this setting if you want to make a lot of coffees with hot or frothed milk and do not want to wait for the machine to heat up first.

13.9 Economy mode

You can set your machine to various power saving modes. SELECT PRODUCT Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal. FILTER NO or YES Turn the Rotary Switch (4) until the following message is displayed: ECONOMY MODE

Economy mode 1

Selecting this level puts the IMPRESSA in constant stand-by mode for making coffee. The machine is heated up separately if you need steam for hot or frothed milk.

13.13 Programming the language
SELECT PRODUCT Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal. FILTER NO or YES Turn the Rotary Switch (4) until the following message is displayed: LANGUAGE ENGLISH Now press the Rotary Switch (4) to start programming.
13.12 Programming the automatic switch-off time
SELECT PRODUCT Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal. FILTER NO or YES
LANGUAGE ENGLISH Turn the Rotary Switch (4) to set the language. LANGUAGE ENGLISH (example) Confirm your selection by pressing the Rotary Switch (4). LANGUAGE ENGLISH Now turn the Rotary Switch (4) until the following message is displayed: EXIT Now press the Rotary Switch (4) to leave the programming mode. SELECT PRODUCT
13.14 Programming the display
This program item allows you to change the time format from 24 hrs. to AM/PM and the units from ml (millilitres) to oz (ounces). SELECT PRODUCT Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal. FILTER NO or YES Turn the Rotary Switch (4) until the following message is displayed: DISPLAY 24HRS / ML Now press the Rotary Switch (4) to start programming. DISPLAY 24HRS / ML
Turn the Rotary Switch (4) to change the time format. DISPLAY AM/PM / ML Confirm your selection by pressing the Rotary Switch (4). DISPLAY AM/PM / ML Turn the Rotary Switch (4) to change the unit of measurement. DISPLAY AM/PM / OZ Confirm your selection by pressing the Rotary Switch (4). DISPLAY AM/PM / OZ Turn the Rotary Switch (4) until the following message is displayed: EXIT Now press the Rotary Switch (4) to leave the programming mode. SELECT PRODUCT

13.15 Information

This program item enables you to check the number of products you made and how often you selected a specific function. SELECT PRODUCT Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal. FILTER NO or YES Turn the Rotary Switch (4) until the following message is displayed: INFO
Now press the Rotary Switch (4) to access the Information menu. TOTAL 1000 (example) Turn the Rotary Switch (4) to display how often you made espresso, 2 espressos, 1 coffee, 2 coffees, coffee la carte, powder, water and steam. Finally, the number of cleaning and decalcifying cycles and filter changes are displayed. To exit the information program, press the Rotary Switch (4). INFO Now turn the Rotary Switch (4) until the following message is displayed: EXIT Now press the Rotary Switch (4) to leave the programming mode. SELECT PRODUCT
The coffee la carte button is now locked and can no longer be used to alter the amount of powder or water for individual beverages. To release the coffee la carte button again, you should proceed as follows: Switch your machine off by pressing the ON/OFF button. Open the programming door (3) Hold the Rotary Switch and the selection button for pre-ground coffee pressed down at the same time and wait until OK appears in the display.

14.2 Locking the programming function
Switch your machine off by pressing the ON/OFF button. Open the programming door (3) Hold the Rotary Switch and the coffee la carte draw-off button pressed down at the same time and wait until STOP appears in the display. The Rotary Switch can no longer be used to gain access to the Programming mode. To release Programming mode again, you should proceed as follows: Switch your machine off by pressing the ON/OFF button. Open the programming door (3) Hold the Rotary Switch and the coffee la carte draw-off button pressed down at the same time and wait until OK appears in the display.

14. Lock functions

If you install your IMPRESSA in a self-service area, you may wish to protect certain settings through a combination of buttons. You can therefore lock the programming function and disable the drawing of coffee la carte.
14.1 Locking/releasing the drawing of coffee la carte
Switch your machine off by pressing the ON/OFF button. Open the programming door (3) Hold the Rotary Switch and the selection button for pre-ground coffee pressed down at the same time and wait until STOP appears in the display.
15. Maintenance 15.1 Filling the water tank

FILL WATER TANK

If this information is displayed, the machine will no longer make coffee. Refill water as described in Chapter 2.3. SELECT PRODUCT The water tank should be rinsed out and filled with fresh water daily. Always use fresh, cold water. Never fill the water tank with milk, mineral water or other liquids.
TRAY MISSING Place the empty, clean drip tray (1) and the coffee grounds bin back into the IMPRESSA. SELECT PRODUCT

15.4 Drip tray missing

TRAY MISSING If this information is displayed, the machine will no longer make coffee. The drip tray (1) has not been installed or not been installed properly. Insert the drip tray (1) and the coffee grounds bin. SELECT PRODUCT
15.2 Emptying the coffee grounds
EMPTY GROUNDS If this information is displayed, the machine will no longer make coffee. However, the machine will still dispense hot water and steam. Empty the coffee grounds bin (26). Carefully take out the drip tray (1) which contains water and the coffee grounds bin (Fig. 15). TRAY MISSING Place the empty, clean drip tray (1) and the coffee grounds bin back into the IMPRESSA. (The tray must be removed from the machine for at least 10 seconds). SELECT PRODUCT
15.5 Filling the bean tank
FILL BEANS If this information is displayed, the machine will no longer make coffee. However, the machine will still dispense hot water and steam. Refill beans as described in Chapter 2.4. SELECT PRODUCT
15.3 Emptying the drip tray

EMPTY TRAY If this information is displayed, the machine will no longer dispense coffee or steam, and the tray must be emptied. Carefully take out the drip tray (1) which contains water and the coffee grounds bin (Fig. 15).
15.6 Removing stones from the grinding gear
Switch the machine off using the ON / OFF key (11). Turn the power switch (27) off. Open the lid of the bean tank (16) and remove the aroma preservation cover (15). Remove any beans with a vacuum cleaner.
Remove the screw in the bean tank (Fig. 9) and fold the finger protection device up (Fig. 10). Insert the key (Fig. 11). Now turn the key counter-clockwise until the jammed stone is released. Remove any remaining powder with a vacuum cleaner. Fold the finger protection device (Fig. 10) down and screw it tight. Fill the bean tank with fresh beans.

15.9 Prompt to decalcify

Lime scale builds up in the IMPRESSA as a result of normal use. The degree of calcification depends on the hardness of the water you use. The IMPRESSA recognizes when you should run a decalcifying cycle. The machine will still make coffee, hot water and steam. However, we recommend that you should decalcify the machine (see Chapter 16) within the next few days. SELECT PRODUCT / DE-SCALE MACHINE

15.7 Changing the filter

After 50 litres of water the filter cartridge will need to be replaced. The display will prompt you to change the filter. Refer to Chapter 5.2 Changing the filter.
After a while the display will change. You should run the decalcifying cycle now (see Chapter 16). SELECT PRODUCT / DE-SCALE NOW
15.8 Prompt to run cleaning cycle
After having dispensed 220 products or after 80 rinsing cycles, the IMPRESSA must be cleaned. You will be informed of this by a message on the display. The machine will still make coffee, hot water and steam. However, we recommend that you should run the cleaning cycle (see Chapter 15) within the next few days. SELECT PRODUCT / CLEAN MACHINE After another 30 products the display will change. You should run the cleaning cycle now (see Chapter 15). SELECT PRODUCT / CLEAN NOW
15.10 Emptying the system
Requirements: The IMPRESSA has been switched off with the ON / OFF key (11), but the power switch (27) is still turned on. This is necessary to protect the machine against damage occurring during transport as a result of frost. Place a receptacle under the pivoting steam spout (23). Press one of the Steam keys until the following message is displayed: SYSTEM EMPTYING When the process has been completed, the IMPRESSA switches itself off. The display will read FILL SYSTEM / PRESS STEAM next time you switch the machine on. For more information, please refer to Chapter 3 First use.
15.11 General cleaning instructions
Never use sharp objects or caustic chemicals for cleaning. Clean the case using a soft, damp cloth. Clean the pivoting steam spout (23) after each use. After heating milk, draw off some hot water to clean the inside of the pivoting steam spout (23). Remove the Professional-Cappuccino Frother to clean it thoroughly. The water tank should be rinsed out and filled with fresh water daily. Visible calcification in the water tank can be removed using a commercial decalcifying agent. To do so, remove the water tank from the machine. If you are using a CLARIS plus filter cartridge, remove it from the tank first.

16. Cleaning
The IMPRESSA features an integrated cleaning program. The process takes approx.15 minutes. Please contact your authorized dealer for JURA cleaning tablets that are suitable specifically for the cleaning program of your IMPRESSA. Please note that the use of unsuitable cleaning agents may cause damage to your machine and could leave unfavourable residues in the water. Once started, the cleaning process must not be interrupted. SELECT PRODUCT CLEAN MACHINE Press Rinse until the following message appears:
EMPTY TRAY / EMPTY GROUNDS Empty out the drip tray (1) and the coffee grounds bin (Fig. 15). TRAY MISSING Place the empty, clean drip tray (1) and the coffee grounds bin back into the IMPRESSA. PRESS RINSE Place a sufficiently large receptacle (ca. 0.5 litres) under the coffee spout (18). Press Rinse. MACHINE CLEANING You will hear an acoustic signal. ADD TABLET / PRESS RINSE Open the lid of the filler funnel for pre-ground coffee (17). Drop a JURA cleaning tablet inside (Fig. 12) and close the lid. Press Rinse. MACHINE CLEANING You will hear an acoustic signal. EMPTY TRAY / EMPTY GROUNDS Empty out the drip tray (1) and the coffee grounds bin (Fig. 15). TRAY MISSING Place the empty, clean drip tray (1) and the coffee grounds bin back into the IMPRESSA. SELECT PRODUCT
When the cleaning program has finished, take out the removable coffee powder tank and briefly rinse it under running water. You can also trigger a cleaning cycle manually at any point in time (see Chapter 13.3).

17. Decalcifying

The IMPRESSA features an integrated decalcifying program. The process takes approx.50 minutes. Lime scale builds up in the IMPRESSA as a result of normal use. The degree of calcification depends on the hardness of the water you use. The IMPRESSA recognizes when you should run a decalcifying cycle. The machine will still make coffee and hot water/steam. However, we recommend that you should decalcify the machine within a few days after the message was displayed. Please contact your authorized dealer for JURA decalcifying tablets that are suitable specifically for the decalcifying program of your IMPRESSA. Please note that the use of unsuitable decalcifying agents may cause damage to your machine and could leave unfavourable residues in the water. Remove any splashes or drops of the decalcifying agent from sensitive surfaces, in particular surfaces made of natural stone or wood, or take appropriate preventive measures. Once started, the decalcifying program must not be interrupted. Always wait until the decalcifying agent has been used up and the tank is empty. Never fill in additional decalcifying agent. SELECT PRODUCT DE-SCALE MACHINE

Press Rinse until the following message appears: EMPTY TRAY / EMPTY GROUNDS Empty out the drip tray (1) and the coffee grounds bin (Fig. 15). TRAY MISSING Place the empty, clean drip tray (1) and the coffee grounds bin back into the IMPRESSA. AGENT IN TANK / PRESS STEAM Take out the water tank (14). Empty out any remaining water. Completely dissolve the content of one blister (3 tablets) in a receptacle containing 0.6 litres of water, and pour the mixture into the water tank. Place the water tank back into the machine. Remove the 2-stage frothing jet (24) or Professional-Cappuccino Frother from the machine (if attached). Place a tall receptacle under the pivoting steam spout (23) and press one of the Steam keys. MACHINE DE-SCALING You will hear an acoustic signal. OPEN TAP Place the receptacle under the hot water spout (25). Turn the Hot Water key (22) to the symbol. MACHINE DE-SCALING You will hear an acoustic signal. CLOSE TAP Turn the Hot Water key (22) to the symbol. MACHINE DE-SCALING
You will hear an acoustic signal. EMPTY TRAY / EMPTY GROUNDS Empty out the drip tray (1) and the coffee grounds bin (Fig. 15). TRAY MISSING Place the empty, clean drip tray (1) and the coffee grounds bin back into the IMPRESSA. FILL WATER TANK / RINSE WATER TANK Thoroughly rinse out the water tank and fill it with fresh cold tap water. Then place it back into the IMPRESSA. PRESS STEAM Place a receptacle under the pivoting steam spout (23). Press one of the Steam keys MACHINE DE-SCALING You will hear an acoustic signal. OPEN TAP Place the receptacle under the hot water spout (25). Turn the Hot Water key (22) to the symbol. MACHINE DE-SCALING You will hear an acoustic signal. CLOSE TAP Turn the Hot Water key (22) to the symbol. MACHINE DE-SCALING You will hear an acoustic signal.
EMPTY TRAY / EMPTY GROUNDS Empty out the drip tray (1) and the coffee grounds bin (Fig. 15). TRAY MISSING Place the empty, clean drip tray (1) and the coffee grounds bin back into the IMPRESSA. SELECT PRODUCT You can also trigger a decalcifying cycle manually at any point in time (see Chapter 13.3).

18. Disposal

Please dispose of old machines in an environmentally compatible way Old machines contain valuable materials capable of being recycled which should be salvaged for recycling. Please therefore dispose of old machines via suitable collection systems.

The IMPRESSA XS95/XS90 One Touch Manual
Original instructions for use Before using the machine read the instructions for use.
The IMPRESSA Manual has been awarded the seal of approval by the independent German Technical Inspection Agency, TV SD, due to its easy-to-understand style, its thoroughness and coverage of safety aspects.

JURA Type 656

Important Safeguards

IMPORTANT SAFEGUARDS

These safeguards apply for machines with UL safety test (see rating plate and chapter 10, Technical data). Follow the basic safety precautions When using electrical appliances, basic safety precautions should always be followed, to reduce the risk of fire, electric shock, and/or injury to persons, including the following: Z Read all instructions. Z Do not touch hot surfaces. Use handles or knobs. Z To protect against fire, electric shock and injury to persons, do not immerse cord, plugs, or body of machine in water or other liquid. Z Close supervision is necessary when any appliance is used by or near children. Z Unplug from outlet when not in use and before cleaning. Allow to cool before putting or taking off parts, and before cleaning the appliance. Z Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment. Z The use of an accessory attachment not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons. Z Do not use outdoors. Z Do not let the cord hang over the edge of a table or counter, or touch hot surfaces. Z Do not place on or near a hot gas or electric burner, or in a heated oven. Z Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to OFF then remove plug from wall outlet. Z Do not use appliance for other than intented use. Z Use extreme caution when dispensing hot steam. Z For household use only.

SAVE THESE INSTRUCTIONS

Special cord set instructions
a. A short power supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a long cord. Your IMPRESSA has a 3-pin grounded plug. b. Longer extension cords are available and may be used if care is exercised in their use. c. If an extension cord is used, 1. the marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance, and 2. if the appliance is of the grounded type, the extension courd should be a grounding type 3-wire cord, and 3. the longer cord shall be arranged so that it will not drape over the counter top or tabletop where it can be pulled on by children or tripped over. Z Z Z As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way or attempt to defeat this safety feature.

Warning

To reduce the risk of fire or electric shock, do not remove any service covers. No user serviceable parts inside. Repair should be done by authorized personnel only. This appliance is for household use. Any servicing other than cleaning and user maintenance should be performed by an authorized service representative: Z Do not immerse base in water or try to disassemble. Z To reduce the risk of fire or electric shock, do not remove the base. No user serviceable parts inside. Repair should be done by authorized service personnel only. Z Check voltage to be sure that the voltage indicated on the name plate agreees with your voltage. Z Never use warm or hot water to fill the water container! Use cold water only.

Caution

Z Z NEVER DO (or you will void your warranty protection): Z
Keep your hands and the cord away from hot parts of the appliance during operation. Never clean with scouring powders or hard implements. Never fill instant coffee, chocolate mix etc. into the grinder or ground coffee funnel (grinder by-pass). It will damage the functioning of the brewing chamber. Never fill sugar coated coffee beans into the bean hopper. In case of doubt, call your dealer. Never fill anything other than coffee beans into the bean container (no chocolate, no rice, no nuts, no spices, nothing other than roasted coffee beans). Never do anything with the machine which is not described in the Users Manual. In case of doubt, call your dealer.

Table of contents

Your IMPRESSA XS95/XS90 One Touch
IMPORTANT SAFEGUARDS Control elements Proper use 10 For your safety 10 The IMPRESSA XS95/XS90 One Touch Manual 12 Symbol description....IMPRESSA XS95/XS90 One Touch 13 Connector System....14 JURA on the Internet....14 Knowledge Builder.....Preparing and using for the first time 15 Setting up.....15 Filling the water tank.....15 Bean container filling.....15 First-time use....16 Using and activating filter....17 Determining and adjusting the degree of water hardness...19 Adjusting grinder.....20 Switching on....20 Switching off (standby)....Familiarising yourself with the control options 22 Preparation at the touch of a button... 22 One-off settings before and during preparation... 23 Entering a permanent setting for the amount of water for a cup size...24 Permanent settings in programming mode...25 Viewing information and maintenance status... Preparation at the touch of a button 28 Espresso.....28 Coffee.....28 Coffee la Carte.....29 Cappuccino.....29 Latte macchiato.....31 Pre-ground coffee..... 32 Hot milk and milk foam..... 33 Hot water......35
Permanent settings in programming mode 36 Products.....36 Energy-saving mode.....38 Time and weekday....39 Programmable switch-on and switch-off time...40 Automatic switch-off.....41 Rinses.....42 Unit amount of water / time format....42 Language.....Maintenance 44 Maintenance tips.....44 Rinsing the machine.....44 Changing the filter....45 Cleaning the machine..... 47 Descaling the machine....49 Rinsing the cappuccino frother.....51 Cleaning the cappuccino frother....52 Disassembling and rinsing the Professional Cappuccino Frother..54 Disassembling and rinsing the Easy Cappuccino Frother...54 Cleaning the bean container....55 Descaling the water tank.....Display messages Troubleshooting Transport and environmentally neutral disposal 60 Transport / Emptying the system....60 Disposal.....Technical data 61 Index 62 JURA contact details / Legal information 64

Control elements

Figure: IMPRESSA XS95 One Touch
Bean container cover Bean container with aroma preservation cover Water tank with handle Power switch and power cable (back of machine) Coffee grounds container Cup platform Drip tray
Fineness of grind switch Cup tray Cover of filler funnel for pre-ground coffee Filler funnel for pre-ground coffee Connector System for removable frothers Professional Cappuccino Frother Height-adjustable coffee spout Hot water spout
Front left 1 Display 2 Rotary Switch cover 3 f Rotary switch Q On/off button c Maintenance button i 1 Espresso button Espressi button o 1 Coffee button d 2 Coffees button e Coffee la Carte button v Pre-ground coffee button
Front right 4 Selector switch 5 Professional Cappuccino Frother 6 Easy Cappuccino Frother a Hot water portion symbol m Hot water symbol p Cappuccino button z Milk portion symbol n Milk symbol q Latte Macchiato button
The Connector System permits the use of different frothers. These are available from stockists. 5 6

Important information

Proper use
The machine is designed and intended for commercial use. It should only be used for coffee preparation and to heat milk and water. Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibility for the consequences of improper use. Before using the machine always carefully read and comply with all these instructions. Keep this manual close to the IMPRESSA and, if appropriate, pass it on to the next user.

For your safety

Please read and note carefully the following important safety information. By doing this, you can avoid the life-threatening danger of electric shock: Z Never use a machine which has been damaged or with a defective power cable. Z For information on what to do in case of damage, for example if there is a smell of burning, unplug the machine immediately from the mains supply and contact the JURA service centre. Z If the power cable for this machine is damaged, it must be repaired either directly by JURA or by a JURA approved service centre. Z Make sure that the IMPRESSA and the power cable are not located close to hot surfaces. Z Be careful to ensure that the power cable does not get caught and does not rub against sharp edges. Z Never open and repair the machine yourself. Do not modify the machine in any way that is not described in the IMPRESSA Manual. The machine contains live parts. If opened, there is a danger of serious injury. Repairs may only be carried out by JURA approved service centres, using original spare parts and accessories. There is a risk of scalds or burns on the spouts or in the nozzle: Z Place the machine out of the reach of children. Z Do not touch any hot parts. Use the handles provided.
Be careful to ensure that the appropriate nozzle is installed and clean. The nozzle or parts of the nozzle might come off if the parts are not assembled correctly or a blockage occurs.

The Connector System permits the use of different cappuccino frothers: Z Professional Cappuccino Frother U Cappuccino / latte macchiato U Hot milk Z Easy Cappuccino Frother U Cappuccino / latte macchiato Visit us on the Internet. @ At www.jura.com you will find interesting and up-to-date information on your IMPRESSA and on every aspect of coffee.

JURA on the Internet

Knowledge Builder
You can familiarize yourself with your IMPRESSA XS95/XS90 One Touch in a fun way on the PC. @ The Knowledge Builder awaits you at www.jura.com. The interactive assistant, LEO, will support you and explain the benefits of and how to use your IMPRESSA.
2 Preparing and using your IMPRESSA for the first time
2 Preparing and using for the first time
This chapter provides you with the information you need to use your IMPRESSA without any problems. You will prepare your IMPRESSA step-by-step for your first coffee experience.

Setting up

Keep the packaging for your IMPRESSA. It should be used to protect the machine during transportation. When setting up your IMPRESSA, please note the following: Z Set the IMPRESSA down on a horizontal surface that is not sensitive to water. Z Choose a spot for your IMPRESSA which is protected against overheating. Ensure that the ventilation slots are not covered.

Filling the water tank

To enjoy perfect coffee we recommend changing the water every day. Milk, mineral water or other liquids can damage the water tank or the machine. T Only fill the water tank with fresh, cold water. T Remove the water tank and rinse it with cold water. T Fill the water tank with fresh, cold water and reinsert.

CAUTION

Bean container filling
The bean container has an aroma preservation cover. This will ensure that your coffee beans retain their aroma for longer. Coffee beans which have been treated with additives (e.g. sugar), pre-ground or freeze-dried coffee will damage the grinder. T Only use untreated coffee beans to refill the bean container. T Open the cover of the bean container and remove the aroma preservation cover. T Remove any dirt or foreign objects inside the bean container. T Fill the bean container with coffee beans, then close the aroma preservation cover and the bean container cover.

First-time use

If the machine is operated with a defective power cable, there is a danger of electric shock. T Never use a machine which has a defective power cable. Precondition: The water tank and bean container are full. T Insert the mains plug into a power socket. 3 T Switch on the IMPRESSA using the power switch on the back of the machine. The on/off button Q lights up (standby). Q T Press the on/off button to switch the IMPRESSA on. The pre-set language appears on the display.

g T Turn the Rotary Switch until FILTER YES is displayed. k T Press the Rotary Switch to confirm the setting. CONFIRMED w appears briefly on the display to confirm the setting. INSERT FILTER / PRESS RINSE, the maintenance button c lights up. T Remove a CLARIS filter cartridge and the filter cartridge extension from the Welcome Pack. T Fit the extension on top of the filter cartridge. T Remove the water tank and empty it. T Lift the cartridge holder and insert the filter cartridge into the water tank, applying slight pressure. T Close the cartridge holder. It will click into place audibly. T Fill the water tank with fresh, cold water and reinsert.
T Place a receptacle (at least 500 ml) under the frother. E If you are using the Professional Cappuccino Frother, set the selection lever of the frother to the steam position n. c T Press the maintenance button. FILTER RINSING, water flows out of the frother. E You can interrupt rinsing of the filter at any time by pressing any button. E The water may be slightly discoloured. This is not harmful to health and does not affect the taste. Filter rinsing stops automatically after approx. 500 ml. COFFEE READY appears on the display. The filter is now activated.
Determining and adjusting the degree of water hardness
The harder the water is, the more frequently the IMPRESSA needs to be descaled. It is therefore important to adjust the water hardness. The water hardness can be adjusted on a continuous scale between 1 dH and 30 dH. This can also be deactivated, which means that the IMPRESSA will not let you know when it has to be descaled. E However, if you are using the CLARIS filter cartridge and have activated it, you will not be able to adjust the water hardness. You can find out what the water hardness is by using the Aquadur test strip supplied as standard. T Hold the test strip briefly (for one second) under flowing water. Shake off the water. T Wait for about one minute. T You will then be able to read the degree of water hardness from the discolouration of the Aquadur test strip and the description on the packaging. You can now adjust the water hardness. Example: To change the water hardness from 16dH to 25dH, proceed as follows: Precondition: COFFEE READY is displayed. T Open the cover of the Rotary Switch. k T Keep the Rotary Switch pressed until MAINTENANCE appears. g T Turn the rotary switch until HARDNESS 16dH is displayed. k T Press the Rotary Switch to enter the programme item.
g T Turn the Rotary Switch until 25dH is displayed. k T Press the Rotary Switch to confirm the setting. CONFIRMED w appears briefly on the display.

HARDNESS 25dH

g T Turn the Rotary Switch until EXIT is displayed. k T Press the Rotary Switch to exit programming mode. COFFEE READY is shown on the display.

Adjusting grinder

You can adjust the grinder continuously to suit the roast of your coffee. If you adjust the fineness of grind when the grinder is not operating, the grinding wheel could be damaged. T Only adjust the fineness of grind when the grinder is running. The fineness of grind setting is correct if the coffee flows regularly from the coffee spout. A fine, thick crema is also formed. Our recommendations: Z Select a fine setting for a light roast. U If the fineness of grind setting is too fine, the coffee only drips from the coffee spout.
Select a coarse setting for a darker roast. U If the fineness of grind is too coarse, the coffee flows too quickly from the coffee spout.
Example: To change the fineness of grind during coffee preparation, proceed as follows: T Open the cover of the bean container. T Place a cup under the coffee spout. o T Press the 1 Coffee button. The grinder starts and 1 COFFEE is displayed. T Turn the fineness of grind switch to the desired position while the grinder is running. The coffee will be prepared and the fineness of grind is adjusted.

Switching on

When the IMPRESSA is switched on, a prompt for the rinse operation automatically appears which is initiated by pressing the maintenance button.
This setting can be changed in programming mode so that the machine automatically activates the switch-on rinse (see Chapter 5 Permanent settings in programming mode Rinses). Precondition: Your IMPRESSA is switched on at the power switch and the on/off button Q is illuminated (standby). Q T Press the on/off button to switch the IMPRESSA on. WELCOME TO JURA appears briefly on the display.
T Place a receptacle under the coffee spout. c T Press the maintenance button. The machine rinses itself, stopping automatically. COFFEE READY appears on the display. Your IMPRESSA is ready to use.

Switching off (standby)

When you switch your IMPRESSA off, the spouts with which a coffee speciality or milk have been prepared are rinsed. T Place a receptacle under the coffee spout and the frother. Q T Press the on/off button. MACHINE RINSING appears on the display, and the coffee spout is rinsed. SPOUT RIGHT / PRESS RINSE c T Press the maintenance button. MACHINE RINSING, the right coffee spout is rinsed. E When you prepare a milk product, but have not performed cappuccino cleaning, CLEAN CAPPUCCINO appears and the maintenance button c lights up. For ten seconds you can start the Clean cappuccino frother procedure by pressing the maintenance button c. The IMPRESSA is switched off (standby mode), and the on/off button Q lights up. E When your IMPRESSA is switched off, a hissing noise may be audible. This is normal and does not have any effect on the machine.

INFORMATION

4 Preparation at the touch of a button
In this chapter you will find out how to prepare coffee and milk specialities and hot water without making further settings. E You can stop the machine at any time while a coffee or milk product or hot water is being prepared. To do this, press any button. E During preparation, you can change the pre-set amount of water by turning the Rotary Switch. @ You can also try out the preparation of coffee specialities online. Visit the Knowledge Builder at www.jura.com.

Espresso

The classic coffee drink from Italy. There is a definite crema on the surface of the espresso. Example: This is how to prepare one espresso. Precondition: COFFEE READY is displayed. T Place an espresso cup under the coffee spout. i T Press the 1 Espresso button. 1 ESPRESSO and the pre-set coffee strength are displayed. The pre-set amount of water flows into the cup. Preparation stops automatically. ENJOY appears on the display. COFFEE READY is then displayed. E To prepare two espressi place two cups under the coffee spout and press the 2 Espressi button 4.

Coffee

Example: This is how to prepare one coffee. Precondition: COFFEE READY is displayed. T Place a coffee cup under the coffee spout. o T Press the 1 Coffee button. 1 COFFEE and the pre-set coffee strength are displayed. The pre-set amount of water flows into the cup. Preparation stops automatically. ENJOY appears on the display. COFFEE READY is then displayed. E To prepare 2 coffees, place two cups under the coffee spout and press the 2 Coffees button d.

Coffee la Carte

The coffee strength of Coffee la Carte can be changed before preparation. Example: Proceed as follows to prepare a strong () cup of Coffee la Carte. Precondition: COFFEE READY is displayed. T Place a cup under the coffee spout. T Open the cover of the Rotary Switch. e T Press the Coffee la Carte button.

A LA CARTE

g T Turn the Rotary Switch until A LA CARTE is displayed. k T Press the Rotary Switch while A LA CARTE is displayed. A LA CARTE , the pre-set amount of water flows into the cup. Preparation stops automatically. ENJOY appears on the display. COFFEE READY is then displayed.

Cappuccino

Cappuccino with the Professional Cappuccino Frother
Your IMPRESSA prepares a cappuccino at the touch of a button. It is not necessary to move the cup.
Precondition: COFFEE READY is displayed. T Take the protective cover off the Professional Cappuccino Frother. T Attach the milk pipe to the frother. T Connect the other end to an original JURA milk container or immerse it directly into the milk.
T Place a cup under the frother. T Turn the selection lever of the frother to the milk foam position p. p T Press the Cappuccino button. CAPPUCCINO and the coffee strength are displayed. The milk foam is then prepared. The operation stops automatically when the pre-set amount of milk is reached.
Coffee preparation then begins. The pre-set amount of water flows into the cup. Preparation stops automatically. ENJOY appears on the display. COFFEE READY is then displayed. To ensure that the frother works perfectly, you should rinse and clean it regularly. The description for this can be found in Chapter 6 Maintenance Cappuccino frother. Cappuccino with the Easy Cappuccino Frother
Precondition: COFFEE READY is displayed. T Take the protective cover off the Easy Cappuccino Frother. T Attach the milk pipe to the frother. T Connect the other end to an original JURA milk container or immerse it directly into the milk.
T Place a cup under the frother. p T Press the Cappuccino button. CAPPUCCINO and the coffee strength are displayed. The milk foam is then prepared. The operation stops automatically when the pre-set amount of milk is reached. Coffee preparation then begins. The pre-set amount of water flows into the cup. Preparation stops automatically. ENJOY appears on the display. COFFEE READY is then displayed. To ensure that the frother works perfectly, you should rinse and clean it regularly. The description for this can be found in Chapter 6 Maintenance Cappuccino frother.

Latte macchiato

Your IMPRESSA prepares a latte macchiato at the touch of the button. It is not necessary to move the glass.
Latte macchiato with the Professional Cappuccino Frother
T Place a glass under the frother. T Turn the selection lever of the frother to the milk foam position p. q T Press the Latte Macchiato button. LATTE MAC. and the coffee strength are displayed. The milk foam is then prepared. The operation stops automatically when pre-set amount of milk is reached. E A brief pause follows during which the hot milk separates from the milk foam. This enables the formation of the typical layers of a latte macchiato. The duration of this pause can be defined in programming mode. Coffee preparation then begins. The pre-set amount of water flows into the glass. Preparation stops automatically. ENJOY appears on the display. COFFEE READY is then displayed. To ensure that the frother works perfectly, you should rinse and clean it regularly. The description for this can be found in Chapter 6 Maintenance Cappuccino frother.

g T Turn the Rotary Switch until ECONOMY MODE - is displayed. k T Press the Rotary Switch to enter the programme item.

SAVE NO

g T Turn the Rotary Switch until SAVE LEVEL 1 is displayed. k T Press the Rotary Switch to confirm the setting. CONFIRMED w appears briefly on the display.

ECONOMY MODE 1

Time and weekday
You already set the time and weekday when you used the machine for the first time. Example: To change the time from 08:45 to 09:50, proceed as follows. Precondition: COFFEE READY is displayed. T Open the cover of the Rotary Switch. k T Keep the Rotary Switch pressed until MAINTENANCE appears. g T Turn the Rotary Switch until TIME 08:45 is displayed. k T Press the Rotary Switch to enter the programme item.

TIME 08:45

g k g k T Turn the Rotary Switch until TIME 09:45 is displayed. T Press the Rotary Switch to confirm the hour setting. T Turn the Rotary Switch until TIME 09:50 is displayed. T Press the Rotary Switch to confirm the minute setting. CONFIRMED w appears briefly on the display. WEEKDAY MONDAY (Example) k T Press the Rotary Switch to confirm the weekday setting. CONFIRMED appears briefly on the display.

TIME 09:50

Programmable switchon and switch-off time
The programmable switch-on and switch-off time can only be set when the time has been set. The following settings can be made in the UNIT ON/OFF menu item: Z UNIT ON: Set the required switch-on time. Z MACH. OFF: Set the required switch-off time. Z ON/OFF: Set the weekdays on which IMPRESSA should switch on and off automatically. E The programmable switch-on only works when the machine is switched on at the power switch (standby). Example: Proceed as follows to set the programmable switch-on time to 07:30 and stipulate that your IMPRESSA does not switch on automatically on Sundays. Precondition: COFFEE READY is displayed. T Open the cover of the Rotary Switch. k T Keep the Rotary Switch pressed until MAINTENANCE appears. g T Turn the Rotary Switch until UNIT ON/OFF is displayed. k T Press the Rotary Switch to enter the programme item.

INIT RINSE MANUAL

g T Turn the Rotary Switch until CAPP RINSE AFTER 10 is displayed. k T Press the Rotary Switch to enter the programme item.

CAPP RINSE AFTER 10

g T Turn the Rotary Switch until CAPP RINSE NOW is displayed. k T Press the Rotary Switch to confirm the setting. CONFIRMED w appears briefly on the display.

CAPP RINSE NOW

RINSES
Unit amount of water / time format
You can change the unit of the amount of water from ml to oz and the time format to 24 HRS or AM/PM. Example: To change the unit for the amount of water from ML to OZ, proceed as follows. Precondition: COFFEE READY is displayed. T Open the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until MAINTENANCE appears. g T Turn the Rotary Switch until SETTINGS 24HRS / ML is displayed. k T Press the Rotary Switch to enter the programme item.

SETTINGS 24HRS

g T Turn the Rotary Switch until SETTINGS ML is displayed. k T Press the Rotary Switch to enter the programme item.

SETTINGS ML

g T Turn the Rotary Switch until SETTINGS OZ is displayed. k T Press the Rotary Switch to confirm the setting. CONFIRMED w appears briefly on the display.

SETTINGS OZ

SETTINGS 24HRS / OZ

Language

You set the language when you used the machine for the first time. Example: To change the language from ENGLISH to DEUTSCH (example), proceed as follows. Precondition: COFFEE READY is displayed. k T Keep the Rotary Switch pressed until MAINTENANCE appears. g T Turn the Rotary Switch until LANGUAGE ENGLISH is displayed. k T Press the Rotary Switch to enter the programme item.

LANGUAGE ENGLISH

g T Turn the Rotary Switch until SPRACHE DEUTSCH (example) is displayed. k T Press the Rotary Switch to confirm the setting. GESPEICHERT w appears briefly on the display. SPRACHE DEUTSCH (example) g T Turn the Rotary Switch until EXIT is displayed. k T Press the Rotary Switch to exit programming mode. BITTE WHLEN (example)

6 Maintenance

Your IMPRESSA has the following integrated maintenance programmes: Z Clean cappuccino frother Z Rinse machine Z Rinse cappuccino frother Z Clean machine Z Decalcify machine Z Change filter E Clean or descale the machine or change the filter whenever the appropriate prompt is displayed.

Rinsing the cappuccino frother
E This chapter applies to the Professional and Easy Cappuccino Frothers. Each time milk has been prepared the IMPRESSA displays a prompt for Cappuccino rinsing. It can be set in programming mode whether the rinsing prompt is displayed immediately or 10 minutes after preparation (refer to Chapter 5 Permanent settings in programming mode Rinses).
Rinsing following a prompt
Precondition: COFFEE READY / RINSE CAPPUCCINO is displayed and the maintenance button c lights up. T Place a receptacle under the frother. E If you are using the Professional Cappuccino Frother, turn the selection lever to the steam position n. c T Press the maintenance button. CAPPU. RINSING, the frother is rinsed. The procedure stops automatically. COFFEE READY appears on the display.
Starting rinsing manually
You can initiate the Rinsing the cappuccino frother operation manually. Precondition: COFFEE READY is displayed. T Place a receptacle under the frother. E If you are using the Professional Cappuccino Frother, turn the selection lever to the steam position n. T Open the cover of the Rotary Switch. k T Keep the Rotary Switch pressed until MAINTENANCE appears. k T Press the Rotary Switch to enter the programme item.
g T Turn the Rotary Switch until RINSE CAPPUCCINO is displayed. k T Press the Rotary Switch to start the rinse operation. CAPPU. RINSING, the frother is rinsed. The procedure stops automatically. COFFEE READY appears on the display.
Cleaning the cappuccino frother
E This chapter applies to the Professional and Easy Cappuccino Frothers. To ensure that the respective frother works perfectly, you should clean it daily when you have been preparing milk.
If the wrong cleaning agent is used, the machine could be damaged and/or traces of detergent could be left behind in the water. T Use only original JURA care products.
E The JURA Cappuccino Cleaner is available from stockists. @ You can also try out the Cleaning the cappuccino frother operation online. Visit the Knowledge Builder at www.jura.com. Cleaning the cappuccino frother manually Precondition: COFFEE READY is displayed. T Open the cover of the Rotary Switch. k T Keep the Rotary Switch pressed until MAINTENANCE appears. k T Press the Rotary Switch to enter the programme item.

7 Display messages

Message Cause/Result The water tank is empty. You cannot prepare any coffee products, hot water or milk products. The coffee grounds container is full. You cannot prepare any coffee products, but you can prepare hot water or milk. Action T Fill the water tank (see Chapter 2, Preparing and using for the first time Filling the water tank). T Empty the coffee grounds container and the drip tray.

FILL WATER TANK

EMPTY GROUNDS
The drip tray is full. You cannot T Empty the drip tray. prepare any coffee products, hot water or milk products. The drip tray is not inserted correctly or is not inserted at all. You cannot prepare any coffee products, hot water or milk products. The bean container is empty. You cannot prepare any coffee products, but you can prepare hot water or milk. The IMPRESSA is prompting you to start a rinse operation or continue a started maintenance programme. The IMPRESSA is prompting you to start cappuccino rinsing. After 220 preparations or 80 switch-on rinses, the IMPRESSA will prompt you to clean it. T Insert the drip tray. T Clean the metal contacts on the back of the drip tray.

TRAY MISSING

FILL BEANS
T Fill the bean container (see Chapter 2, Preparing and using for the first time Filling the bean container). T Press the maintenance button to start rinsing or to continue the maintenance programme. T Press the maintenance button to start cappuccino rinsing. T Clean the machine (see Chapter 6, Maintenance Cleaning the machine).

PRESS RINSE

COFFEE READY / RINSE CAPPUCCINO COFFEE READY / CLEAN MACHINE

Message

Cause/Result Message, if in spite of prompt no cleaning has been carried out yet.
Action T Clean the machine (see Chapter 6, Maintenance Cleaning the machine). T Descale the machine (see Chapter 6, Maintenance Descaling the machine). T Descale the machine (see Chapter 6, Maintenance Descaling the machine). T Replace the CLARIS filter cartridge (see Chapter 6 Maintenance Changing the filter). T Replace the CLARIS filter cartridge (see Chapter 6 Maintenance Changing the filter).

COFFEE READY / CLEAN NOW

COFFEE READY / The IMPRESSA is prompting DECALCIFY MACHINE you to descale it. COFFEE READY / DECALCIFY NOW COFFEE READY / CHANGE FILTER
Message, if in spite of prompt no decalcification has been carried out yet. After 50 litres of water have flowed through, or after two months, the filter will cease to work. Message, if in spite of prompt no filter change has been carried out yet.
COFFEE READY / CHANGE NOW

NOT ENOUGH PRE-GROUND

T The next time you make coffee There is too little pre-ground use more pre-ground coffee coffee in the filler funnel. The IMPRESSA stops the operation. (refer to Chapter 4, Preparation at the touch of a button Pre-ground coffee).

Descaling 49 Rinsing 44 Setting up 15 Switching off (stand-by) 21 Switching on 20 Maintenance 44 Maintenance tips 44 Milk Foaming and heating with the Professional Cappuccino Frother 33 Foaming with the Easy Cappuccino Frother 34 Hot 33 Milk portion 33 Milk foam 33 One-off settings before and during preparation 23 Power switch 8 Pre-ground coffee 32 Filler funnel 8 Pre-ground coffee 32 Preparation At the touch of a button 28 Cappuccino 29 Coffee 28 Coffee la carte 29 Espresso 28 Hot water 35 Latte macchiato 31 Milk 33 Pre-ground coffee 32 Problems Troubleshooting 58 Professional Cappuccino Frother 8, 14 Disassembling and rinsing 54 Programmable switch-on and switch-off time 40 Programming mode 36 Automatic switch-off 41 Energy-saving mode 38 Language 43 Products 36 Rinses 42
Switch-on and switch-off time 40 Time and weekday 39 Unit amount of water / Time format 42 Prompt to take action Symbols used 12 Rinses 42 Rinsing Cappuccino frother 51 Machine 44 Rotary switch 9 Safety 10 Selector switch 9 Settings Default settings in programming mode 36 Entering a default setting for the amount of water for a cup size 24 One-off settings before and during preparation 23 Setting up 15 Standby Switching off 21 Switching off (stand-by) 21 Switching on 20 Technical data 61 Time and weekday 39 Troubleshooting 58 Use Proper 10 Use, First time 16 Viewing information and maintenance status 27 Viewing maintenance status 27 Water hardness 19 Determining and adjusting 19 Water tank 8 Descaling 55 Filling 15 Works settings 38
Art. 67415/XS95/en/201011
JURA contact details / Legal information

Your JURA dealer:

JURA Elektroapparate AG Kaffeeweltstrasse 10 CH-4626 Niederbuchsiten Tel. +233 www.jura.com Directives The machine complies with the following directives: Z 2006/42/EC Machinery Directive Z 2004/108/EC Electromagnetic Compatibility We reserve the right to make technical changes. The illustrations used in the IMPRESSA XS95/XS90 One Touch Manual show the IMPRESSA XS95 One Touch model. Your IMPRESSA could incorporate minor changes. Your opinion is important to us! Use the contact link at www.jura.com. The Instructions for Use contain information which is protected by copyright. It is not permitted to photocopy or translate these Instructions for Use into another language without the express written consent of JURA Elektroapparate AG.