Having TROUBLE with operation?

Please reset your unit

Refer to page of How to reset your unit

ENGLISH FRANAIS

Vous avez des PROBLMES de fonctionnement?
Rinitialisez votre appareil
Rfrez-vous la page intitule Comment rinitialiser votre appareil
KD-R412 / KD-R411 / KD-R35 / KD-R312 / KD-R311
CD RECEIVER / RCEPTEUR CD
Dear Customer, This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. European representative of Victor Company of Japan, Limited is: JVC Technical Services Europe GmbH Postfach Friedberg Germany
Cher(e) client(e), Cet appareil est conforme aux directives et normes europennes en vigueur concernant la compatibilit lectromagntique et la scurit lectrique. Reprsentant europen de la socit Victor Company of Japan, Limited: JVC Technical Services Europe GmbH Postfach Friedberg Allemagne
For canceling the display demonstration, see page 4. / Pour annuler la dmonstration des affichages, rfrez-vous la page 4. For installation and connections, refer to the separate manual. / Pour linstallation et les raccordements, se rfrer au manuel spar.

INSTRUCTIONS

MANUEL DINSTRUCTIONS
EN, FR 2009 Victor Company of Japan, Limited

GET0624-003A

1009DTSMDTJEIN [E/EU]
CoverRear_KD-R412_003A_f.indd 1-2

10/13/09 11:51:18 AM

Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical instruments. 4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

Warning:

If you need to operate the unit while driving, be sure to look around carefully or you may be involved in a traffic accident.

Battery Products

Information for Users on Disposal of Old Equipment and Batteries
[European Union only] These symbols indicate that the product and the battery with this symbol should not be disposed as general household waste at its end-of-life. If you wish to dispose of this product and the battery, please do so in accordance with applicable national legislation or other rules in your country and municipality. By disposing of this product correctly, you will help to conserve natural resources and will help prevent potential negative effects on the environment and human health. Notice: The sign Pb below the symbol for batteries indicates that this battery contains lead.

For safety.

Do not raise the volume level too much, as this will block outside sounds, making driving dangerous. Stop the car before performing any complicated operations.
Temperature inside the car.
If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit. KD-R412/KD-R411 is equipped with the steering wheel remote control function. Before operating, connect a JVC's OE remote adapter (not supplied) which matches your car to the steering wheel remote input terminal on the rear of the unit. For details, refer also to the instructions supplied with the remote adapter.

ENGLISH

EN02-09_KD-R412_003A_f.indd 2

10/15/09 2:32:58 PM

How to read this manual
The following icons/symbols are used to indicate: Press and hold the button(s) [Hold] until the desired operation begins. Turn the control dial. Turn the control dial to make a selection, then press to confirm. ( XX) <XXXX> Reference page number Menu setting item Continued on the next page

CONTENTS

3 How to read this manual 3 How to attach/detach the control

3 How to reset your unit 3 How to forcibly eject a disc
Canceling the display demonstration Setting the clock Basic operations Listening to the radio Listening to a disc Listening to the USB device
(For KD-R412/KD-R411/KD-R35)
How to attach/detach the control panel
Listening to the other external components Using the remote controller

(For KD-R412/KD-R411)

Selecting a preset sound mode Menu operations More about this unit Maintenance Troubleshooting Specifications

How to reset your unit

Your preset adjustments will also be erased.
How to forcibly eject a disc

[Hold]

You can forcibly eject the loaded disc even if the disc is locked. To lock/unlock the disc, 8. Be careful not to drop the disc when it ejects. If this does not work, reset your unit.
EN02-09_KD-R412_003A_4.indd 3

10/12/09 9:59:13 AM

Canceling the display demonstration
1 Turn on the power. 4 Select <DEMO OFF>.

(Initial setting)

6 Finish the procedure.

Setting the clock

1 Turn on the power. 2

6 Adjust the minute.

3 Select <CLOCK>.
7 Select <24H/12H>.
4 Select <CLOCK SET>. 8 Select <24 HOUR> or

<12 HOUR>.

5 Adjust the hour. 9 Finish the procedure.
EN02-09_KD-R412_003A_4.indd 4

Basic operations

Ejects the disc Control dial Loading slot Display window
Detaches the panel Remote sensor (for KD-R412/KD-R411) You can control this unit with an optionally purchased remote control, 12). RM-RK50 (
Auxiliary input jack For KD-R412/ KD-R411/KD-R35
USB (Universal Serial Bus) input jack When you press or hold the following button(s).

Button

General operation
Turns on. Selects the available sources (if the power is turned on). If the source is ready, playback also starts. Turns off if pressed and held. Adjusts the volume level. Selects items. Mutes the sound while listening to a source. If the source is CD or USB, playback pauses. Press the control dial again to cancel muting or resume playback. Confirms selection. Selects the sound mode. Enters tone level adjustment directly ( Enters playback mode menu directly ( 13) if pressed and held. 9).

Returns to the previous menu Activates/deactivates TA Standby Reception Enters PTY Searching mode if pressed and held Power off : Checks the current clock time Power on : Changes the display information ENGLISH 5
EN02-09_KD-R412_003A_5.indd 5

10/13/09 12:49:11 PM

Listening to the radio

] FM or AM

ST lights up when receiving an FM stereo broadcast with sufficient signal strength.

Manual search

M flashes, then press the button repeatedly.
Automatic presetting (FM)
SSM (Strong-station Sequential Memory) You can preset up to 18 stations for FM. While listening to a station.
When an FM stereo broadcast is hard to receive
] <TUNER> ] <MONO> ] <MONO ON> Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure to select <MONO OFF>.
] <TUNER> ] <SSM> ] <SSM 01 06> / <SSM 07 12> / <SSM 13 18> SSM flashes and local stations with the strongest signals are searched and stored automatically. To preset another 6 stations, repeat the above procedure by selecting one of the other 6 SSM setting ranges.
Changing the display information
Frequency = Clock = (back to the beginning)
EN02-09_KD-R412_003A_5.indd 6

10/13/09 12:49:39 PM

Manual presetting (FM/AM)
You can preset up to 18 stations for FM and 6 stations for AM. Ex.: Storing FM station of 92.50 MHz into preset number 04.
The following features are available only for FM Radio Data System stations.

] 92.50MHz

Searching for your favourite FM Radio Data System programmePTY Search
You can tune in to a station broadcasting your favourite programme by searching for a PTY code.

PRESET MODE flashes.

The last selected PTY code appears.
] Selects preset number 04. P04 flashes and MEMORY appears.
] Select one of your favourite programme types or a PTY code ( and start searching.
Selecting a preset station
If there is a station broadcasting a programme of the same PTY code as you have selected, that station is tuned in.

Standby receptions

TA Standby Reception
TA Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) from any source other than AM. The volume changes to the preset TA volume level if the current level is lower than the preset level ( 15). To activate TA Standby Reception If the TP indicator lights up, TA Standby Reception is activated. If the TP indicator flashes, TA Standby Reception is not yet activated. To activate the reception, tune in to another station providing Radio Data System signals required for TA Standby Reception. To deactivate the reception, press T/P BACK again.

EN02-09_KD-R412_003A_5.indd 7

10/12/09 10:31:57 AM

PTY Standby Reception
PTY Standby Reception allows the unit to switch temporarily to your favourite PTY programme from any source other than AM. To activate and select your favourite PTY code for PTY Standby Reception, see Menu 14) operations: <PTY-STANDBY>. ( If the PTY indicator lights up, PTY Standby Reception is activated. If the PTY indicator flashes, PTY Standby Reception is not yet activated. To activate the reception, tune in to another station providing these signals. To deactivate the reception, select <PTY OFF> for the PTY code ( 14). The PTY indicator goes off.
Programme A broadcasting on different frequency areas (01 05)
To change the Network-Tracking Reception setting, see Menu operations: <AF-REG>. ( 14)
Automatic station selection
Programme Search Usually when you select a preset number, the station preset in that number is tuned in. If the signals from the FM Radio Data System preset station are not sufficient for good reception, this unit, using the AF data, tunes in to another frequency possibly broadcasting the same programme as the original preset station is broadcasting. See Menu operations: <P-SEARCH>. ( 15)
Tracing the same programme
Network-Tracking Reception When driving in an area where FM reception is not sufficient enough, this unit automatically tunes in to another FM Radio Data System station of the same network, possibly broadcasting the same programme with stronger signals.
Station name (PS) = Station Frequency = Programme type (PTY) = Clock = (back to the beginning)

Listening to a disc

Stopping playback and ejecting the disc
NO DISC appears. Press / SOURCE to listen to another playback source. 8 ENGLISH ] Turn on the power. All tracks will be played repeatedly until you change the source or eject the disc.
Prohibiting disc ejection
To cancel the prohibition, repeat the same procedure.
EN02-09_KD-R412_003A_4.indd 8

10/12/09 9:59:15 AM

Selecting the playback modes

Before using the remote controller:
Aim the remote controller directly at the remote sensor on the unit. DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting).
Warning (to prevent accidents and damage):
Do not install any battery other than CR2025 or its equivalent. Do not leave the remote controller in a place (such as dashboards) exposed to direct sunlight for a long time. Store the battery in a place where children cannot reach. Do not recharge, short, disassemble, heat the battery, or dispose of it in a fire. Do not leave the battery with other metallic materials. Do not poke the battery with tweezers or similar tools. Wrap the battery with tape and insulate when throwing away or saving it.

Remote sensor

EN10-17_KD-R412_003A_4.indd 12
Selecting a preset sound mode
You can select a preset sound mode suitable for the music genre.
Storing your own sound mode
You can store your own adjustments in memory.
FLAT = NATURAL = DYNAMIC = VOCAL BOOST = BASS BOOST = USER = (back to the beginning) While listening, you can adjust the tone level of the selected sound mode.
] <PRO EQ> ] <BASS> / <MIDDLE> / <TREBLE>
Adjust the sound elements of the selected tone. ( 19) Repeat steps 2 and 3 to adjust other tones. The adjustments made will be stored automatically in USER.
Adjust the level (06 to +06) of the selected tone (BASS / MIDDLE / TREBLE). The sound mode is automatically stored and changed to USER.
The current sound mode changes to USER automatically.

Menu operations

Repeat step 2 if necessary. To return to the previous menu, press BACK. To exit from the menu, press DISP or MENU.

Category

Menu item
DEMO Display demonstration CLOCK SET Clock setting
Selectable setting, [ Initial: Underlined ]
DEMO ON : Display demonstration will be activated automatically if no operation is done for about 20 seconds. ( 4) DEMO OFF : Cancels. [ 0:00 ] 4) : Adjust the hour, then the minute. (
EN10-17_KD-R412_003A_4.indd 13
24H/12H Time display mode CLOCK ADJ *1 Clock adjustment BASS MIDDLE TREBLE DIMMER SCROLL *HOUR 12 HOUR AUTO

: For settings, 4.

PRO EQ
: The built-in clock is automatically adjusted using the CT (clock time) data in the Radio Data System signal. : Cancels. 13. : For settings,

TAG DISPLAY

SSM *3 Strong-station Sequential Memory AF-REG *4 Alternative frequency/ regionalization reception
DIMMER ON : Dims the display and button illumination. DIMMER OFF : Cancels. SCROLL ONCE : Scrolls the displayed information once. SCROLL AUTO : Repeats scrolling (at 5-second intervals). SCROLL OFF : Cancels. Pressing DISP for more than one second can scroll the display regardless of the setting. TAG ON : Shows the Tag information while playing MP3/ WMA tracks. TAG OFF : Cancels. SSM : For settings, 6. SSM SSM AF ON : When the currently received signals become weak, the unit switches to another station (the programme may differ from the one currently received). (The AF indicator lights up.) : When the currently received signals become weak, the unit switches to another station broadcasting the same programme. (The AF and REG indicators light up.) : Cancels. : Activates PTY Standby Reception with one of the PTY codes ( 17).

DISPLAY

AF-REG ON
PTYSTANDBY *3, *4 *1 *2 *3 *4

OFF PTY OFF, PTY codes

Takes effect only when CT (clock time) data is received. Some characters or symbols will not be shown correctly (or will be blanked) on the display. Displayed only when the source is FM. Only for FM Radio Data System stations.
EN10-17_KD-R412_003A_4.indd 14

10/12/09 9:59:01 AM

TA VOLUME *5 Traffic announcement volume P-SEARCH *5 Programme search MONO *7 Monaural mode IF BAND Intermediate frequency band
VOLUME 00 : VOLUME 50 (or VOLUME 00 VOLUME 30) *6 [ VOLUME 15 ] SEARCH ON : Activates Programme Search. ( SEARCH OFF : Cancels. MONO ON MONO OFF AUTO
FADER *8 BALANCE *9 AUDIO LOUD Loudness AUX ADJUST *10 Auxiliary adjust (For KD-R312/ KD-R311)
R06 F06 [ 00 ] L06 R06 [ 00 ] LOUD ON LOUD OFF AUX ADJ 00 AUX ADJ 05
: Activate monaural mode to improve FM reception, but stereo effect will be lost. : Restore the stereo effect. ( 6) : Increases the tuner selectivity to reduce interference noises between adjacent stations. (Stereo effect may be lost.) : Subject to interference noises from adjacent stations, but sound quality will not be degraded and the stereo effect will remain. : Adjust the front and rear speaker output balance. : Adjust the left and right speaker output balance. : Boost low and high frequencies to produce a well-balanced sound at a low volume level. : Cancels. : Adjust the auxiliary input level to avoid the sudden increase of the output level when changing the source to external component connected to the AUX input jack on the control panel.
*5 Only for FM Radio Data System stations. *6 Depends on the amplifier gain control. *7 Displayed only when the source is FM. *8 If you are using a two-speaker system, set the fader level to 00. *9 For KD-R412/KD-R411/KD-R312/KD-R311: This adjustment will not affect the subwoofer output. *10 Displayed only when <AUX IN> is set to <AUX ON>.
EN10-17_KD-R412_003A_4.indd 15
VOL ADJUST Volume adjust (For KD-R412/ KD-R411/KD-R35)
VOL ADJ 05 : Preset the volume adjustment level of VOL ADJ +05 each source (except FM), compared to the [ VOL ADJ 00 ] FM volume level. The volume level will automatically increase or decrease when you change the source. Before making an adjustment, select the source you want to adjust. VOL ADJ FIX appears on the display if FM is selected as the source. SUB.W : Select if the REAR LINE OUT terminals are used for connecting a subwoofer (through an external amplifier). REAR : Select if the REAR LINE OUT terminals are used for connecting the speakers (through an external amplifier). LOW : Frequencies lower than 72 Hz are sent to the subwoofer. MID : Frequencies lower than 111 Hz are sent to the subwoofer. HIGH : Frequencies lower than 157 Hz are sent to the subwoofer. : Adjust the subwoofer output level. SUB.W 00 SUB.W 08 [ SUB.W 04 ] BEEP ON : Activates the keypress tone. BEEP OFF : Deactivates the keypress tone. : Select either one which mutes the sounds MUTING 1/ MUTING 2 while using a mobile phone. MUTING OFF : Cancels. LOW POWER : VOLUME 00 VOLUME 30 (Select if the maximum power of each speaker is less than 50 W to prevent damaging the speakers.) HIGH POWER : VOLUME 00 VOLUME 50 AM ON : Enable AM in source selection. AM OFF : Disable AM in source selection. AUX ON : Enable AUX IN in source selection. AUX OFF : Disable AUX IN in source selection.

L/O MODE *11 Line output mode
SUB.W FREQ *11, *12 Subwoofer cutoff frequency
AUDIO 16 ENGLISH SRC SELECT
SUB.W LEVEL *11, *12 Subwoofer level BEEP TEL MUTING Telephone muting AMP GAIN *13 Amplifier gain control AM *14 AM station AUX IN *15 Auxiliary input
*11 For KD-R412/KD-R411/KD-R312/KD-R311. *12 Displayed only when <L/O MODE> is set to <SUB.W>. *13 The volume level automatically changes to VOLUME 30 if you change to <LOW POWER> with the volume level is set higher than VOLUME 30. *14 Displayed only when any source other than AM is selected. *15 Displayed only when any source other than AUX IN is selected.
EN10-17_KD-R412_003A_4.indd 16

More about this unit

General
If you turn off the power while listening to a track, playback will start from where it had been stopped previously next time you turn on the power. If no operation is done for about 60 seconds after pressing MENU button, the operation will be canceled.

Disc operations

Caution for DualDisc playback
The Non-DVD side of a DualDisc does not comply with the Compact Disc Digital Audio standard. Therefore, the use of Non-DVD side of a DualDisc on this product may not be recommended.
This unit has been designed to reproduce CDs/CD Texts, and CD-Rs (Recordable)/CDRWs (Rewritable) in audio CD (CD-DA), MP3 and WMA formats. If you change the source while listening to a disc, playback stops. Next time you select CD as the playback source, playback will start from where it had been stopped previously. When a disc is inserted upside down, PLEASE and EJECT appear alternately on the display. Press 0 to eject the disc. If the ejected disc is not removed within 15 seconds, it is automatically inserted into the loading slot again to protect it from dust. MP3 and WMA tracks (words file and track are used interchangeably) are recorded in folders. While fast-forwarding or reversing on an MP3 or WMA disc, you can only hear intermittent sounds.

Tuner operations

Storing stations in memory
During SSM search. All previously stored stations are erased and the stations are stored anew. When SSM is over, the station stored in the lowest preset number will be automatically tuned in. When storing a station manually, the previously preset station is erased when a new station is stored in the same preset number.
FM Radio Data System operations
Network-Tracking Reception requires two types of Radio Data System signalsPI (Programme Identification) and AF (Alternative Frequency) to work correctly. If a Traffic Announcement is received by TA Standby Reception, the volume level automatically changes to the preset level (TA VOLUME) if the current level is lower than the preset level. When Alternative Frequency Reception is activated (with AF selected), Network-Tracking Reception is also activated automatically. PTY codes: NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, POP M (music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS, OTHER M (music), WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (music), OLDIES, FOLK M (music), DOCUMENT

Playing a CD-R or CD-RW

Use only finalized CD-Rs or CD-RWs. This unit can only play back files of the same type as those detected first if a disc includes both audio CD (CD-DA) files and MP3/WMA files. This unit can play back multi-session discs; however, unclosed sessions will be skipped while playing.
EN10-17_KD-R412_003A_4.indd 17
Some CD-Rs or CD-RWs may not play back on this unit because of their disc characteristics, or for the following reasons: Discs are dirty or scratched. Moisture condensation has occurred on the lens inside the unit. The pickup lens inside the unit is dirty. The files on the CD-R/CD-RW are written using the Packet Write method. There are improper recording conditions (missing data, etc.) or media conditions (stained, scratched, warped, etc.). CD-RWs may require a longer readout time since the reflectance of CD-RWs is lower than that of regular CDs. Do not use the following CD-Rs or CD-RWs: Discs with stickers, labels, or a protective seal stuck to the surface. Discs on which labels can be directly printed by an ink jet printer. Using these discs under high temperature or high humidity may cause malfunctions or damage to the unit.

Playing an MP3/WMA disc

This unit can play back MP3/WMA files with the extension code <.mp3> or <.wma> (regardless of the letter caseupper/lower). This unit can show the names of albums, artists (performer), and Tag (Version 1.0, 1.1, 2.2, 2.3, or 2.4) for MP3 files and for WMA files. This unit can display only one-byte characters. No other characters can be correctly displayed. This unit can play back MP3/WMA files meeting the conditions below: Bit rate: MP3: 32 kbps 320 kbps WMA: 32 kbps 192 kbps
Sampling frequency of MP3: 32 kHz, 44.1 kHz, 48 kHz (for MPEG-1) 16 kHz, 22.05 kHz, 24 kHz (for MPEG-2) Sampling frequency of WMA: 22.05 kHz, 32 kHz, 44.1 kHz, 48 kHz Disc format: ISO 9660 Level 1/Level 2, Romeo, Joliet, Windows extension The maximum number of characters for file/folder names (includes 4 extension characters<.mp3> or <.wma>): characters (depending on the media used, etc.). This unit can recognize a total of 512 files, 255 folders, and 8 hierarchical levels. This unit can play back files recorded in VBR (variable bit rate). Files recorded in VBR have a discrepancy in the elapsed time display, and do not show the actual elapsed time. In particular, this difference becomes noticeable after performing the search function. This unit cannot play back the following files: MP3 files encoded in MP3i and MP3 PRO format. MP3 files encoded in an inappropriate format. MP3 files encoded with Layer 1/2. WMA files encoded in lossless, professional, and voice format. WMA files which are not based upon Windows Media Audio. WMA files copy-protected with DRM. Files which have data such as AIFF, ATRAC3, etc. The search function works but search speed is not constant.

EN18-25_KD-R412_003A_f.indd 18

10/15/09 12:15:29 PM

Playing MP3/WMA tracks from a USB device (for KD-R412/KD-R411/ KD-R35)
While playing from a USB device, the playback order may differ from other players. This unit may be unable to play back some USB devices or some files due to their characteristics or recording conditions. Depending on the shape of the USB devices and connection ports, some USB devices may not be attached properly or the connection might be loose. Connect one USB mass storage class device to the unit at a time. Do not use a USB hub. If the connected USB device does not have the correct files, CANNOT PLAY appears. This unit can show Tag (Version 1.0, 1.1, 2.2, 2.3, or 2.4) for MP3 files and for WMA files. This unit can play back MP3/WMA files meeting the conditions below: Bit rate of MP3/WMA: 32 kbps 320 kbps Sampling frequency of MP3: 32 kHz, 44.1 kHz, 48 kHz (for MPEG-1) 16 kHz, 22.05 kHz, 24 kHz (for MPEG-2) Sampling frequency of WMA: 22.05 kHz, 32 kHz, 44.1 kHz, 48 kHz This unit can play back MP3 files recorded in VBR (variable bit rate). The maximum number of characters for: Folder names : 32 characters File names : 32 characters MP3 Tag : 64 characters WMA Tag : 32 characters This unit can recognize a total of files, 255 folders (255 files per folder including folder without unsupported files), and of 8 hierarchies. This unit does not support SD card reader. This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 500 mA.
USB devices equipped with special functions such as data security functions cannot be used with the unit. Do not use a USB device with 2 or more partitions. This unit may not recognized a USB device connected through a USB card reader. This unit may not play back files in a USB device properly when using a USB extension cord. This unit cannot play back the following files: MP3 files encoded with MP3i and MP3 PRO format. MP3 files encoded in an inappropriate format. MP3 files encoded with Layer 1/2. WMA files encoded in lossless, professional, and voice format. WMA files not based on Windows Media Audio.

Preset sound mode

Sound element Frequency Level
60 Hz 06 to +Hz 100 Hz 200 Hz 0.5 kHz 06 to +06 1.0 kHz 1.5 kHz 2.5 kHz 10.0 kHz 06 to +06 12.5 kHz 15.0 kHz 17.5 kHz
Q1.0 Q1.25 Q1.5 Q2.0 Q0.75 Q1.0 Q1.25 Q FIX

MIDDLE

TREBLE
EN18-25_KD-R412_003A_5.indd 19

10/13/09 1:54:42 PM

Maintenance
How to clean the connectors
Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.

To keep discs clean

A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. Do not use any solvents (for example, conventional record cleaner, spray, thinner, benzine, etc.) to clean discs.

Connectors

To play new discs
New discs may have some rough spots around the inner and outer edges. If such a disc is used, this unit may reject the disc. To remove these rough spots, rub the edges with a pencil or ball-point pen, etc. Do not use the following discs: Single CD (8 cm disc) Warped disc

Moisture condensation

Moisture may condense on the lens inside the unit in the following cases: After starting the heater in the car. If it becomes very humid inside the car. Should this occur, the unit may malfunction. In this case, eject the disc and leave the unit turned on for a few hours until the moisture has evaporated.

How to handle discs

Center holder When removing a disc from its case, press down the center holder of the case and lift the disc out, holding it by the edges. Always hold the disc by the edges. Do not touch its recording surface. When storing a disc in its case, gently insert the disc around the center holder (with the printed surface facing up). Make sure to store discs in cases after use. Sticker and sticker residue Stick-on label

Unusual shape

C-thru Disc (semitransparent disc)
Transparent or semitransparent parts on its recording area
EN18-25_KD-R412_003A_4.indd 20

10/12/09 9:59:27 AM

Troubleshooting

Symptom

Sound cannot be heard from the speakers. PROTECT appears on the display and no operations can be done. General

Remedy/Cause

Adjust the volume to the optimum level. Make sure the unit is not muted/paused ( Check the cords and connections. 5).
Check to be sure the terminals of the speaker leads are covered with insulating tape properly, then reset the unit ( 3). If PROTECT does not disappear, consult your JVC IN-CAR ENTERTAINMENT dealer or a company supplying kits. Reset the unit. ( 3)
The unit does not work at all. AUX cannot be selected. SSM automatic presetting does not work. FM/AM Static noise while listening to the radio. AM cannot be selected. Disc cannot be played back. CD-R/CD-RW cannot be played back. Tracks on the CD-R/CD-RW cannot be skipped. Disc playback Disc can neither be played back nor ejected. Disc sound is sometimes interrupted. NO DISC appears on the display. PLEASE and EJECT appear alternately on the display.
Check the <SRC SELECT> = <AUX IN> setting. ( 16) Store stations manually. Connect the aerial firmly. Check the <SRC SELECT> = <AM> setting. ( Insert the disc correctly. Insert a finalized CD-R/CD-RW. Finalize the CD-R/CD-RW with the component which you used for recording.
Unlock the disc. ( 8) Eject the disc forcibly. (

Stop playback while driving on rough roads. Change the disc. Check the cords and connections. Insert a playable disc into the loading slot. Press 0, then insert a disc correctly.
EN18-25_KD-R412_003A_4.indd 21
Disc cannot be played back.
Use a disc with MP3/WMA tracks recorded in a format compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet. Add the extension code <.mp3> or <.wma> to the file names. Skip to another track or change the disc. (Do not add the extension code <.mp3> or <.wma> to non-MP3 or WMA tracks.) Do not use too many hierarchical levels and folders.

Noise is generated.

MP3/WMA playback
A longer readout time is required (READING keeps flashing on the display). Tracks do not play back in the order you have intended them to play.
The playback order is determined when the files are recorded.
For KD-R412/KD-R411/KD-R35: Selected folder is an empty folder *. Select another NO FILE appears on the display. folder that contains MP3/WMA tracks. * Folder that is physically empty or folder that contains data but does not contain valid MP3/WMA track. NOT SUPPORT appears on the display and track skips. The elapsed playing time is not correct. The correct characters are not displayed (e.g. album name). Skip to the next track encoded in an appropriate format or to the next non-copy-protected WMA track. This sometimes occurs during playback. This is caused by how the tracks are recorded on the disc. This unit can only display letters (upper case), numbers, and a limited number of symbols.
EN18-25_KD-R412_003A_f.indd 22

10/16/09 5:48:38 PM

The track played back is not an MP3/WMA track. Skip to another file. (Do not add the extension code <.mp3> or <.wma> to non-MP3 or WMA tracks.) Readout time varies depending on the USB device. Do not use too many hierarchy or folders. Turn off the power then on again. Reattach the USB device again. Selected folder is an empty folder*. Select another folder that contains MP3/WMA tracks. * Folder that is physically empty or folder that contains data but does not contain valid MP3/WMA track.
READING keeps flashing on the display.
USB device playback (for KD-R412/KD-R411/KD-R35)
NO FILE appears on the display.
NOT SUPPORT appears on the Skip to the next track encoded in an appropriate format display and track skips. or to the next non-copy-protected WMA track. Tracks/folders are not played back in the order you have intended. CANNOT PLAY flashes on the display. NO USB appears on the display. The unit cannot detect the USB device. The correct characters are not displayed (e.g. album name). While playing a track, sound is sometimes interrupted. The playback order is determined by the write-in time stamp. The first track/folder written into the USB device will be the first track/folder for playback. Attach a USB device that contains tracks encoded in an appropriate format. Reattach the USB device again.

This unit can only display letters (upper case), numbers, and a limited number of symbols. The MP3/WMA tracks have not been properly copied into the USB device. Copy MP3/WMA tracks again into the USB device, and try again.
JVC bears no responsibility for any loss of the data in the USB mass storage class device while using this System.
EN18-25_KD-R412_003A_4.indd 23

Specifications

Maximum Power Output: Continuous Power Output (RMS): Front/ Rear: Front/ Rear: 50 W per channel 19 W per channel into 4 , 40 Hz to Hz at no more than 0.8% total harmonic distortion. 4 (4 to 8 allowance) 12 dB (60 Hz, 80 Hz, 100 Hz, 200 Hz) Q1.0, Q1.25, Q1.5, Q2.dB (0.5 kHz, 1.0 kHz, 1.5 kHz, 2.5 kHz) Q0.75, Q1.0, Q1.dB (10.0 kHz, 12.5 kHz, 15.0 kHz, 17.5 kHz) Q (Fixed) 40 Hz to Hz 70 dB 2.5 V/20 k load (full scale) 2.5 V/20 k load (full scale)
Load Impedance: Tone Control Range: AUDIO AMPLIFIER SECTION

Bass: Middle: Treble:

Frequency Response: Signal-to-Noise Ratio: Line-Out Level/Impedance: Subwoofer-Out Level/Impedance: Output Impedance: Other Terminal:
Except KD-R35: Except KD-R35:

Frequency Range:

FM Tuner: TUNER SECTION

MW Tuner: LW Tuner:

1 k AUX (auxiliary) input jack, Aerial input For KD-R412/KD-R411: Steering wheel remote input, USB input Jack For KD-R35: USB input Jack FM: 87.5 MHz to 108.0 MHz AM: MW: 522 kHz to kHz LW: 144 kHz to 279 kHz Usable Sensitivity: 9.3 dBf (0.8 V/75 ) 50 dB 16.3 dBf (1.8 V/75 ) Quieting Sensitivity: Alternate Channel 65 dB Selectivity (400 kHz): Frequency Response: 40 Hz to Hz Stereo Separation: 40 dB Sensitivity: 20 V Selectivity: 40 dB Sensitivity: 50 V
EN18-25_KD-R412_003A_4.indd 24
Type: Signal Detection System: CD PLAYER SECTION GENERAL USB SECTION (for KD-R412/ KD-R411/KD-R35)
Compact disc player Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) 5 Hz to Hz Frequency Response: Dynamic Range: 93 dB Signal-to-Noise Ratio: 98 dB Wow and Flutter: Less than measurable limit MP3 Decoding Format: (MPEG1/2 Audio Layer 3) Max. Bit Rate: 320 kbps WMA (Windows Media Audio) Decoding Format: Max. Bit Rate: 192 kbps USB Standard: USB 1.1, USB 2.0 Data Transfer Rate (Full Speed): Max. 12 Mbps Compatible Device: Mass storage class Compatible File System: FAT 32/16/12 Playable Audio Format: MP3/WMA 500 mA Max. Current: DC 5 V Power Requirement: Operating Voltage: DC 14.4 V (11 V to 16 V allowance) Grounding System: Negative ground Allowable Operating Temperature: 0C to +40C Dimensions (W H D): Installation Size: 182 mm 52 mm 160 mm (approx.) Panel Size: 188 mm 58 mm 13 mm Mass: 1.3 kg (excluding accessories)
Design and specifications are subject to change without notice.

KD-R412/KD-R411/KD-R35
Installation/Connection Manual Manuel dinstallation/raccordement

GET0624-017A

[E/EU] 1009DTSMDTJEIN
EN, FR 2009 Victor Company of Japan, Limited

ENGLISH / FRANAIS

You need the installation kits which corresponds to your car. / Vous avez besoin des kits dinstallation correspondants votre voiture. Check the battery system in your car / Vrifiez le systme de batterie de votre voiture To the car system / Au systme autoradio
12 V DC, NEGATIVE ground / 12 V CC, masse NGATIVE
WARNINGS / AVERTISSEMENTS
To prevent short circuits: Disconnect the batterys negative terminal and make all electrical connections before installing the unit. Cover the terminals of the UNUSED leads with insulating tape. Be sure to ground this unit to the cars chassis again after installation. Replace the fuse with one of the specified rating. Connect speakers with a maximum power of more than 50 W (impedance of 4 to 8 ). Otherwise, change the <AMP GAIN> setting. (See page 16 of the INSTRUCTIONS.) The heat sink becomes very hot after use. Be careful not to touch it when removing this unit. Heat sink / Dissipateur de chaleur Pour viter les courts-circuits: Dconnectez la borne ngative de la batterie et raliser toutes les connexions avant dinstaller lappareil. Recouvrez les prises des fils NON UTILISS avec du ruban isolant. Assurez-vous de raccorder de nouveau la mise la masse de cet appareil au chssis de la voiture aprs linstallation. Remplacer le fusible par un de la valeur prcise. Connectez des enceintes avec une puissance maximum de 50 W (impdance de 4 8 ). Sinon, changez le rglage <AMP GAIN>. (Voir la page 16 du MANUEL DINSTRUCTIONS.) Le dissipateur de chaleur devient trs chaud aprs usage. Faire attention de ne pas le toucher en retirant cet appareil.
PRECAUTIONS on power supply and speaker connections
DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the unit will be seriously damaged. BEFORE connecting the speaker leads of the power cord to the speakers, check the speaker wiring in your car.
PRECAUTIONS sur lalimentation et la connexion des enceintes
NE CONNECTEZ PAS les fils denceintes du cordon dalimentation la batterie; sinon, lappareil serait srieusement endommag. AVANT de connecter les fils denceintes du cordon dalimentation aux enceintes, vrifiez le cblage des enceintes de votre voiture.
INSTALLATION / INSTALLATION
The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC IN-CAR ENTERTAINMENT dealer or a company supplying kits. Lillustration suivante est un exemple dinstallation typique. Si vous avez des questions ou avez besoin dinformation sur des kits dinstallation, consulter votre revendeur dautoradios JVC. Part list / Liste de pices A Control panel / Panneau de commande (1) B Sleeve / Manchon (1) C Trim plate / Plaque dassemblage (1) D Power cord / Cordon dalimentation (1) E Handles / Poignes (2)
In-dash mounting / Montage encastr
Do the required electrical connections (see page 2). Ralisez les connexions lectriques (voir page 2). Install the unit at an angle of less than 30. Installez lappareil avec un angle de moins de 30.
Bend the appropriate tabs to hold the sleeve firmly in place. Tordez les languettes appropries pour maintenir le manchon en place.

When installing the unit without using the sleeve / Lors de linstallation de lappareil scans utiliser de manchon
Flat head screws (Mmm) / Vis tte plate (Mmm) *2
Removing the unit / Retrait de lappareil
Release the rear section first. / Ouvrez la section arrire en premier.
Pocket / Poche Bracket / Support *2 *1 When you stand the unit, be careful not to damage the fuse on the rear. *2 Not supplied for this unit. *1 Lorsque vous mettez lappareil la verticale, faire attention de ne pas endommager le fusible situ sur larrire. *2 Non fourni avec cet appareil.
Install_KD-R412_017A_f.indd 1

11/4/09 4:30:14 PM

ELECTRICAL CONNECTIONS / RACCORDEMENTS ELECTRIQUES
Connecting the external amplifier or subwoofer (for KD-R412/KD-R411) / Connexion damplificateurs extrieurs ou dun caisson de grave (pour le KD-R412/KD-R411)
Remote lead / Fil dalimentation distance Signal cord / Cordon de signal *1 Reset the unit. / Rinitialisez lautoradio. JVC Amplifier / JVC Amplificateur Y-connector / Connecteur Y *1 To the blue (white stripe) lead of the unit / Au fil bleu (bande blanche) de lappareil Rear speakers or subwoofer / Enceintes arrire ou le caisson de grave Make the <L/O MODE> setting accordingly, see page 16 of the INSTRUCTIONS. / Faite le rglage <L/O MODE> en fonction, voir page 16 du MANUEL DINSTRUCTIONS. *1 Not supplied for this unit. / Non fourni avec cet appareil. *2 Firmly attach the ground wire to the metallic body or to the chassis of the carto the place uncoated with paint. / Attachez solidement le fil de mise la masse au chssis mtallique de la voiture un endroit qui nest pas recouvert de peinture. Rear ground terminal / Borne arrire de masse 15 A fuse / Fusible 15 A Steering wheel remote input (for KD-R412/KD-R411) / Entre de la tlcommande de volant (pour le KD-R412/KD-R411) Aerial terminal / Borne de lantenne ISO connector / Connecteur ISO
For some VW/Audi or Opel (Vauxhall) automobiles / Pour certaines automobiles VW/Audi ou Opel (Vauxhall)
You may need to modify the wiring of the supplied power cord as illustrated. / Vous aurrez peut-tre besoin de modifier le cblage du cordon dalimentation fourni comme montr sur lillustration. Contact your authorized car dealer before installing this unit. / Contactez votre revendeur automobile autoris avant dinstaller lappareil.