Before Use

2WARNING To prevent injury or fire, take the following precautions:
To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. Do not watch or fix your eyes on the units display when you are driving for any extended period.

Handling discs

Do not touch the recording surface of the disc. Do not stick tape etc. on the disc, or use a disc with tape stuck on it. Do not use disc type accessories. Clean from the center of the disc and move outward. When removing discs from this unit, pull them out horizontally. If the disc center hole or outside rim has burrs, use the disc only after removing the burrs with a ballpoint pen etc.

How to reset your unit

If the unit or the connected unit (disc auto changer, etc.) fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed. Remove the USB device before pressing the Reset button. Pressing the Reset button with the USB device installed can damage the data contained in the USB device. For how to remove the USB device, see <Playing a USB device> (page 10).
Discs that cannot be used
Discs that are not round cannot be used.
Discs with coloring on the recording surface or discs that are dirty cannot be used. This unit can only play the CDs with

Reset button

Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe it again with a clean soft dry cloth.
. This unit may not correctly play discs which do not have the mark. You cannot play a CD-R or CD-RW that has not been finalized. (For the finalization process refer to your CD-R/CD-RW writing software, and your CDR/CD-RW recorder instruction manual.) If you try to load a 3-inch-disc with its adapter into the unit, the adapter might separate from the disc and damage the unit.
Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters.

Other notes

If you experience problems during installation, consult your Kenwood dealer. When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. The characters conforming to ISO 8859-1 character set can be displayed. The RDS or RBDS feature wont work where the service is not supported by any broadcasting station.

Lens Fogging

When you turn on the car heater in cold weather, dew or condensation may form on the lens in the disc player of the unit. Called lens fogging, this condensation on the lens may not allow discs to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer.

DVD VIDEO Mode:Full AVOUT:AVIN

SCRN TI

DVD VIDEO

T 00:00:05

Easy Control button
For the functions of Easy Control buttons, see <Control of Other Sources While Displaying the Navigation Screen> (page 15).

Source Control screen

For the functions of Navigation information, see <Navigation Information Interrupt on the Screen of Other Sources> (page 14).
Navigation information (DNX5220BT/DNX5220 only)
E Scrolls the list and makes a selection
When the list screen of a source control screen is displayed, press it for more than 1 second to enter list control mode. Turn it either way to scroll the list. Press it to make a selection. Press it again for more than 1 second to return to the volume control mode. Example: List screen of DVD MEDIA source
Sets and controls the navigation system function.
Using the Navigation System
Displays the navigation system screen and makes the navigation function available. 1 Displaying the navigation screen
Navigatoin Information Interrupt on the Screen of Other Sources (DNX5220BT/DNX5220 only)
Interrupts other source screen and displays information such as guide point. While a control screen is displaying: Navigation information appears on the bottom of the screen.
1 Displays the Navigation information. When touched this area, the navigation screen appears.
2 Setting the navigation system function Touch the navigation system button displayed on the screen. See the included NAVIGATION SYSTEM's INSTRUCTION MANUAL for information on using the navigation system.
You can set the navigation system function when nothing else is displayed on the screen. If anything else, such as Easy control panel is displayed, erase it first. For DDX5022/DDX5022Y/DDX52RY, an optional navigation system needs to be connected. See <Navigation unit that can be connected to this unit> (page 7) for connectable navigation units.
Control of Other Sources While Displaying the Navigation Screen
Selected source can be controlled while displaying navigation screen. 1 Display the easy control buttons
When "USB" or "iPod" is selected:
7 During iPod play : Searches Music or Video. During USB play : Selects a file. 8 Plays or pauses. 9 When touched this area, the source control screen appears. When "TUNER" is selected:
When "DVD" is selected: p Tunes in a station. q Switches the band (to AM or FM 1/2/3). w When touched this area, the source control screen appears.

DVD Disc Menu

Selects an option from the DVD Disc Menu. 1 Display the Disc Menu Control screen

Me n u Ctrl Top

Return

En t e r Highlight

Canc e l

Ex i t

Calls the Menu. Returns to the Disc Menu screen. Selects a menu option. Enters your menu selection. Returns to the previous menu screen. Displays the Top Menu. Highlight Control. Clears the Disc Menu Control.
Highlight Control You can select a chapter and title for the DVD Menu screen. When you touch the screen, you can select the DVD menu.
Me n u Ctrl Top Menu Return
q Switches the subtitle language. (during program playback only) w Switches the voice language. (during program playback only) e Displays the Zoom Control screen. r Clears the Disc Menu Control. Zoom Control

Me n u Ctrl SUB

En t e r

Highlight

Z o om

H i g h l i gh t

Z o omC t r l
To cancel Highlight Control, press [FNC] button.
2 Select Disc Menu options Disc Menu
t Changes the zoom ratio at 4 levels (2 times, 3 times, 4 times, or off ) each time you touch. y Scrolls the screen in the direction you touch. u Returns to the Disc Menu Control screen. i Clears the Disc Menu Control.

Me n u Ctrl

13 Z o om
9 Calls the Menu Control. p Switches the picture angle. (during program playback only) English 19

VCD Zoom Control

Displays an enlarged VCD screen. 1 Display the Zoom Control screen

Z o om x2

1 Changes the zoom ratio at 2 levels (2 times or off ) each time you touch. 2 Scrolls the screen in the direction you touch. 3 Clears the Zoom Control button.
Music Disc & Audio File Listening
You can recall various control screens during CD/Audio file playback.
For the basic method of how to play a music disc/audio file, see <Basic Operations> (page 10). See <List of playable discs> (page 7) for playable discs. See <About Audio file> (page 8) for playable files.
Switches to the source control screen to use various playback functions.
5 Music information display Selects the Disc Text or Track Text. is appeared, the text display is When scrolled by pressing it. 6 Ejects the disc. 7 Fast Forwards or Fast Backwards. 8 Stops playing the built-in disc player. When pressed twice, the disc is played from its beginning when you play it in the next time. 9 Selects a track. p Plays or pauses. q Starts or stops Scan Play (that plays the beginning of each music one after the other). w Repeats to play (the present track). e Starts or stops Random Play (to play music in random order). r Switches the number of lines displayed in the Information Display. t Switches the play time display between Track, Disc, and Disc Remaining Time. y Function Indicator u Appears when a disc is inserted.

During CD playback

Switches to the wallpaper. Track (Music) Number Display Play Mode Display Play Time Display

English 21

Music Disc & Audio File Listening During Audio file playback
b MUSIC, MOVIE or PICTURE indicator n Appears when a disc is inserted. m Repeats to play the music or data of the present folder. , Displays images in the folder currently being played one after another. If there is no image in the folder currently being played, initial background is displayed. For information on setting the image display time, see <System Setup> (page 60). You can search for folders and Audio files through a hierarchy. P Displays music information (such as Tag and content property) of Audio file being played.
i Switches to the playback screen. If there is no playback screen, wallpaper is displalyed. o Folder and File Number Display ; Play Mode Display a Play Time Display s Music information display Selects Folder Name, File Name, Title, Artist Name, or Album Name. When is appeared, the text display is scrolled by pressing it. d Ejects the disc. f Fast Forwards or Fast Backwards. (Disabled when a JPEG is being played.) g Stops playing. When pressed twice, the disc is played back from its beginning in the next time. h Selects a file. j Plays or pauses. k Selects a folder. l Switches the button display. / Starts or stops Scan Play (that plays the beginning of each music or data one after the other). z Repeats to play (the preset files or data). x Starts or stops Random Play (to play files of the present folder in random order). c Switches the number of lines displayed in the Information Display. v Function Indicator 22 DNX5220BT/DNX5220/DDX5022/DDX5022Y/DDX52RY
Q Lists folders and Audio files Folder opens when touched, and the Audio file is played. When is appeared, the text display is scrolled by pressing it. W Scrolls the list. E Moves to the top hierarchy level. R Moves up a hierarchy level.
You can recall various control screens during playback of video file (MPEG 1, MPEG 2 and DivX file) and picture file (JPEG file).
Function During Playback Screen
5 JPEG: Picture Control Button Area (page 25) DivX: Sub=Off, Audio 1/1 MPEG: Not effective 6 Information Display Button Area

DVD MEDIA

DVD MEDIA 2 1

P 00:00:05

1 Folder/File Number Display 2 Play Time Display 3 Forward File Search Area Selects the next file. 4 Backward File Search Area Selects the previous file. English 23
Video File/Picture File Watching

PICTURE

PICTURE IN
1 Selects a file. 2 Stops playing. 3 Plays or pauses.
Switches to the playback screen. Folder and File Number Display Play Mode Display Play Time Display
5 Video/Picture information display Selects Folder Name, File Name, Title, Artist Name, or Album Name. When is appeared, the text display is scrolled by pressing it. 6 Ejects a disc. 7 Fast Forwards or Fast Backwards. (Disabled when a JPEG is being played.) 8 Stops playing. When pressed twice, the disc is played back from its beginning in the next time. 9 Selects a file. p Plays or pauses. q Selects a folder. w Switches the button display. e Starts or stops Scan Play (that plays the beginning of each song or data one after the other). r Repeats to play (the preset files or data). t Starts or stops Random Play (to play files of the present folder in random order). y Switches the number of lines displayed in the Information Display. u Function Indicator i PICTURE, MOVIE or MUSIC indicator o Appears when a disc is inserted. ; Repeats to play the file of the present folder. a Displays images in the folder currently being played one after another. If there is no image in the folder currently being played, initial background is displayed. For information on setting the image display time, see <System Setup> (page 60). s You can search for folders and files through a hierarchy. d Displays information of file being played.

g Scrolls the list. h Moves to the top hierarchy level. j Moves up a hierarchy level.

Picture Control

Adjusting the video display. 1 Start Picture Control
DVD MEDIA Mode:Full AVOUT:AVIN
2 Adjust the video display

Picture Ctrl

Reverses the picture horizontally. Rotates counter clockwise. Rotates clockwise. Ends Picture Control. Applies the effect.
f Lists folders and Video files/Picture files. Folder opens when touched, and the Video/ Picture file is played. English 25
Various control screens appear in the Tuner Source mode.
For the basic method of receiver button operations, see <Basic Operations> (page 10). Set the remote controller mode switch to "AUD" mode before starting operation, see <Remote Controller mode switch> (page 82).
Switches to the source control screen to use various functions.
[TUNER] button on the "Source Select" screen
4 Radio station information display. Selects the Program Service Name, Title & Artist name, Station Name, Category Name 1/2, or Radio Text. 5 Switches to the FM1/2/3 band. 6 Switches to the AM band. 7 Tunes in a station. Use the <Seek Mode> (page 27) to change the frequency switching. 8 Switches the button display. 9 Selects the Monaural reception mode. (Only when receiving the FM broadcast) p Selects the Auto Memory mode. (See page 28 for the <Auto Memory>) q Switches the Seek mode. (See page 27 for the <Seek Mode>) w Switches the number of lines displayed in the Information Display. e Turns the Local Seek function On or Off. r Turns the Traffic Information function On or Off. See <Traffic Information>, (page 29). t When to buttons appear, you can recall the stations on memory. For memory of broadcasting stations, see <Auto Memory> (page 28) or <Manual Memory> (page 28). y Searches station by program type. See <Search for Program Type> (page 30). u Lists and selects memorized station. i Displays Radio Text screen. See <Radio Text> (page 29).
1 Band display 2 Preset number 3 Frequency display
o Memorized stations are displayed. Touch to tune in. ; Scrolls the list. The mode is switched in following order each time you touch the button. Display "AUTO1" "AUTO2" "MANU" Setting Tunes in a station with good reception automatically. Tunes in stations in memory one after another. Switches to the next frequency manually.

BAND SEEK

y Memorized stations are displayed. Touch to tune in.*1
*1 Not available for the optional digital TV Tuner KTC-D500E.
1 Switches to the TV screen. 2 Band display 3 TV Area Group Display See <TV Setup> (page 72). 4 Memory Number Display 5 Channel display 6 Channel information display 38 DNX5220BT/DNX5220/DDX5022/DDX5022Y/DDX52RY
TV Menu (with KTC-D500E (optional accessory) connected only)
Menu Control screen appears by touching the area shown below.

Me n u Ctrl EPG

1 Shows EPG (Electric Program Guide) screen. 2 Shows Digital TV Broadcansting menu screen. 3 Returns to the previous screen. 4 Executes selected menu item. 5 Returns to Digital TV screen. 6 Moves highlight in Digital TV Broadcansting menu.
Sets a station selection. Auto Memory terminates when 6 stations are stored or when all stations are tuned in.
The mode is switched in following order each time you touch the button. Display "AUTO1" "AUTO2" "MANU" Setting Tunes in a station with good reception automatically. Tunes in stations in memory one after another. Switches to the next frequency manually. English 39
Stores the current receiving channel in memory. 1 Select a station you wish to store in memory

Set Station Name

Assigns a name to a station. 1 Select a station you wish to name 2 Start Name set
2 Store in memory 3 Enter the name See <Character Entry> (page 43) for information on how to enter a name. 4 End Name set
You can listen to audio files stored in Bluetooth audio player and cell-phone. For DNX5220/DDX5022/DDX5022Y/DDX52RY, Bluetooth unit KCA-BT200 (optional accessory) is necessary.

For DNX5220BT :

You need to register your audio player and cell-phone before using it with this unit. For more details, see <Registering Bluetooth Unit> (page 73). If you have registered two or more audio players or cellphones, you need to select one of them. For more details, see <Bluetooth Unit Connection> (page 75).
Switches to control screen to use various functions.
For DNX5220/DDX5022/DDX5022Y/DDX52RY :
You need to register your audio player and cell-phone to your Bluetooth Unit beforehand. Make sure to read the instruction manual of the Bluetooth Unit as well.
[Bluetooth] button on the "Source Select" screen
Plays. Pauses. Stops playing. Selects a file.
If the Bluetooth Audio player does not support AVRCP profile, buttons 1 to 4 are not displayed. Operate from the Audio player.
Muting Audio Volume upon Reception of Phone call
When the telephone is called, the system is paused automatically.
When the telephone is called. The Phone Call ("CALL") screen appears, and system is paused. Phone Call ("CALL") screen

You cannot play an Audio file/VCD disc in the "2" position. Also, you may not play some music CDs in the "2" position. Your setup is disabled when the disc is being played.
t Selects a picture display time. ( "Middle") The Display of a JPEG picture is changed. ("Short", "Middle", "Long")

Panel Color Coordinate

6 Returns to the "System Setup 1" screen. 7 Moves to the "System Setup 3" screen. 8 Sets the button illumination color. See <Panel Color Coordinate> (page 61). 9 When set to "ON", the illumination color of the screen and buttons changes one after another. Sets the screen and button illumination color. 1 Display the Panel Color Coordinate screen
See <System Setup> (page 60). 2 Select a color
p Returns to the "System Setup 2" screen. q Moves to the "System Setup 4" screen. w Sets the Preout output. (Settable only when in Standby mode) "Rear" : Rear sound is output. "Subwoofer" : Subwoofer sound is output. e Sets the function of the [NAV] button. "V. OFF" : Press the [NAV] button for more than 1 second to turn the display off. "R-CAM" : Press the [NAV] button for more than 1 second to switch to rear view.
1 Sets to the touched color. 2 Sets and registers favorite color. 3 Returns to the "System Setup 2" screen. To register your original color 1 Start the RGB coordinate
2 Adjust the each color value
r Returns to the "System Setup 3" screen.
1 Selects a preset number to register.

English 61

Setup Menu Adjusts the Red value. Adjusts the Green value. Adjusts the Blue. Returns to the "Panel Color Coordinate" screen.

AV Interface Setup

You can set audio and visual (AV) interface parameters. 1 Display the AV Interface screen Touch Menu" screen (page 56). 2 Setup each item
3 Select a Preset number to register
Adjusted color is registered to the selected Preset button. 4 Complete the color coordination 1 Moves to the "AV Interface 2" screen. 2 Sets a name to be displayed when you select a system that is connected via the AV INPUT port. ( "VIDEO") 3 Sets an image display of the system that is connected via the AV INPUT port. ( "OFF") "OFF": When the image source is switched, an image entered via the AV INPUT port is displayed. "ON": When an image signal is entered via the AV INPUT port, this image is displayed. 4 Selects a navigation system connection. ( "RGB") (DDX5022/DDX5022Y/DDX52RY only) "RGB": Allows the Kenwood's Navigation System to connect via the AV INPUT port. "AV-IN": Allows a third-party navigation system to connect via the AV INPUT port. "Off": Must be used if no navigation system is connected. (The navigation display is cancelled when the AV source is switched.)

In this Screen Control screen, you can perform setups for the menu screen. Setups for videos such as DVD can be performed on the <Screen Control> (page 44).

3 Adjust the clock time

6 Returns to the "Screen Adjust" screen. 7 Moves to the "Mode Select 2" screen.
8 Selects a screen mode of the DVD playback screen. You can select any of the following screen mode. "Full", "Just", "Zoom", "Normal" 9 Selects a screen mode of the iPod VIDEO playback screen. You can select any of the following screen mode. "Full", "Just", "Zoom", "Normal" p Selects a screen mode of the USB playback screen. You can select any of the following screen mode. "Full", "Just", "Zoom", "Normal"
Full picture mode ("Full")
Zoom picture mode ("Zoom")
Justify picture mode ("Just")
Normal picture mode ("Normal")
q Returns to the "Mode Select 1" screen. w Selects a screen mode of the TV screen. You can select any of the following screen mode. "Full", "Just", "Zoom", "Normal" e Selects a screen mode of the VIDEO playback screen. You can select any of the following screen mode. "Full", "Just", "Zoom", "Normal" r Selects a screen mode of the rear view camera (R-CAM) screen. You can select any of the following screen mode. "Full", "Just", "Zoom", "Normal"
When you select the Menu or Navigation, the display is shown in the full-size display mode automatically. The screen mode of these displays cannot be changed. The picture quality can be set for each source.

Security Code Setup

You can set a security code to protect your receiver system against theft.
4 Register your security code
When the Security Code function is activated, it cannot be released. Note that your Security Code is in the 4 digit number entered in your "Car Audio Passport" in this package.

5 Reenter the security code Reenter the same security code as that you have entered in Step 3 for confirmation.
1 Display the Security Code Setup screen Touch Menu" screen (page 56). in the "Setup
If you enter a different security code, the screen returns to Step 3 (for the first code entry).
6 Register the security code again
1 Displays the Security code input screen. 2 Turns the SI function on or off. If turned "ON", the burglar alarm lamp flashes when the vehicle ignition is off. ( "ON") 2 Start Security Code setup
Now, your security code is registered. If you press the Reset button or if you disconnect your receiver from the battery after the code registration, you need to enter the registered security code.
If you have already completed the code registration, you cannot touch.

3 Enter a security Code

Input four-digit number.
If you have pressed the Reset button or if you have disconnected the Receiver from battery. 1 Enter the correct security code

iPod Setup

Performs setup when using iPod. 1 Display the iPod Setup screen Touch Menu" screen (page 56). 2 Setup each item
You must enter the same security code as that you have entered in Step 3. 2 Enter the security code 1 Sets the Audio book playback speed. 2 Sets Wide Screen on or off.
Now, you can use your Receiver.
"Wide Screen" cannot be set while the iPod is connected.
If you enter an incorrect security code, you cannot use your Receiver for a while.
Incorrect entry count or more
Receiver inoperable time 5 minutes 1 hour 24 hours

TV Setup

The TV signal receiving areas can be set. (with the optional accessory TV Tuner connected only) 1 Displaying TV Setup screen Touch Menu" screen (page 56). 2 Setting up TV

RDS Setup

You can set RDS related parameters. 1 Display the RDS Setup screen in the "Setup Touch Menu" screen (page 56). 2 Setup each item
1 Moves to "TV2 Area Set" screen. 2 Sets the present TV1 receiving area.
1 Moves to "RDS Setup 2" screen. 2 Sets a news bulletin interrupt time. 3 Turns the Alternative Frequency function On or Off. ( "ON") 4 Turns the Region Restriction function On or Off. ( "ON") 5 Turns the Auto TP Seek function On or Off. ( "ON")
3 Returns to the "TV1 Area Set" screen. 4 Sets the present TV2 receiving area.
6 Returns to the "RDS Setup 1" screen. 7 Selects a display language for the PTY function.

Bluetooth Setup

Registers and selects Bluetooth unit. 1 Display the Bluetooth Setup screen Touch Menu" screen (page 56). 2 Setup each item
Registering Bluetooth Unit
Registers the Bluetooth unit to be connected. 1 Display the Connect Device List screen

2 Turns the Zone Function (that sets different source sounds for front and rear speakers) On or Off. 3 Sets the front and rear audio source separately. (This button appears when the Zone function is On.)
When the rear speaker sound is switched, the audio source that is output at the AV OUTPUT terminal is also switched to the same source.
4 Adjusts the volume of the rear channel. (This button appears when the Zone function is On.)
There are following limitations when zone function is set to "On". - There is no output from the subwoofer. - <Audio Setup> (page 56) and <Equalizer Control> (page 79) are not available. - When "DVD" or "USB" is selected as the front source, the rear source can be selected from "Front" (same source as front), "iPod" or "VIDEO", etc. When the rear source is
set to "Front", "DVD" or "USB", the same source screen or control screen is displayed in the rear monitor. See <AV Interface Setup> (page 62).
For DDX5022Y/DDX52RY : This unit can be operated using the Remote Controller supplied with this unit. For DNX5220BT/DNX5220/DDX5022 : Optional Remote Controller KNA-RCDV330 is designed for controlling this unit.
Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could result, if the Remote Controller falls down and gets wedged under the pedals while driving. Do not place the battery near an open flame or heat source. This may cause the battery to explode. Do not recharge, short, break up or heat the battery or place it in an open fire. Such actions may cause the battery to leak fluid. If spilled fluid comes in contact with your eyes or on clothing, immediately rinse with water and consult a physician. Place the battery out of reach of children. In the unlikely event that a child swallows the battery, immediately consult a physician.

Battery installation

Use two "AAA"/"R03"-size batteries. Insert the batteries with the + and poles aligned properly, following the illustration inside the case.

Remote Controller mode switch
The functions operated from the remote controller differ depending on the position of the mode switch.
AUD mode Switch to this mode when controlling a selected source or tuner source, etc. DVD mode Switch to this mode when playing DVDs or CDs etc. with the player integrated in this unit. TV mode Switch to this mode when controlling TV. NAVI mode Switch to this mode when controlling Navigation unit.

POSITION

AUD DVD TV NAVI RETURN
If the Remote Controller operates only over shorter distances or does not operate at all, it is possible that the batteries are depleted. In such instances, replace the both batteries with new ones.

CANCEL

The position of the remote control mode switch is indicated in the title of each mode, e.g., "(AUD mode)". When controlling a player that is not integrated in the unit, select "AUD" mode.
Common operations (AUD mode)
Source switching Switches to the source to be played.
DISP SRC ZOOM MENU OUT IN POSITION V.SEL
Cursor key Moves the cursor when displaying menu.
ZOOM MENU OUT IN POSITION AUD DVD TV NAVI MODE/TOP MENU FNC/MENU/PBC AUDIO RETURN
Volume control Adjusts the volume.

VIEW MAP DIR ANGLE

ENTER Enters options.
ZOOM MENU OUT IN POSITION

DVD TV NAVI

VOL MODE/TOP MENU FNC/MENU/PBC 2 ZONE

AUDIO RETURN

2ABC 3 DEF
Volume attenuator Press the key once to lower the volume. Press again to restore the previous volume.
Hands-free communication Enters the dialing method selection mode. When a call comes in, it answers the call.
MODE/TOP MENU FNC/MENU/PBC ROUTEM AV OUT VIEW VOICE OPEN MAP DIR ANGLE
AUDIO RETURN CANCEL SUBTITLE

7 PQRS 8TUV 9WXYZ

CLEAR DIRECT

ATT ZOOM VOL

Dual Zone Switches the Dual Zone function ON and OFF.
Function Switches the function screen.

DVD TV NAVI

MODE/TOP MENU FNC/MENU/PBC ROUTEM VOICE OPEN MAP DIR

2 ZONE

AV OUT VIEW

2ABC 3 DEF 5JKL 6MNO

Rear volume control Adjusts volume at rear when the Dual Zone function is ON.
MODE Switches the screen mode. Screen mode changes each time you press this key.
TV NAVI MODE/TOP MENU FNC/MENU/PBC ROUTEM VOICE OPEN MAP DIR ANGLE
V.SEL Switches to the navigation screen.

DVD TV

DVD/VCD/CD/Audio files (DVD mode)
Folder search Selects the folder to be played.
CD Track number Play time Cancel Audio files Folder number File number Cancel VCD 1.X, VCD 2.X (PBC OFF)
Track search and file search Selects the track or file to be played.
Track number Cancel VCD 2.X (PBC ON)
Play/Pause Pauses the track. Press again to resume playing.
Scene number Number Cancel Once you have switched to the direct search feature, specify the search number from the numeric keypad, and then press [ENTER] key. Numeric keypad

! Cannot set up the subwoofer.
Cannot set up subwoofer phase. No output from the subwoofer. Cannot set up the low pass filter. Cannot set up the high pass filter. Subwoofer is not set to On. <Audio Setup> (page 56) Preout is set to "Rear". <System Setup> (page 60) The Dual zone function is enabled. <Zone Control> (page 80)

General

? The Touch Sensor Tone doesnt sound.
The preout jack is being used. The Touch Sensor Tone cant be output from

the preout jack.

Tuner source
? Radio reception is poor.
The car antenna is not extended. Pull the antenna out all the way. The antenna control wire is not connected. Connect the wire correctly, referring to the
! Cannot set up the subwoofer phase.
Subwoofer is not set to On. <Audio Setup>
(page 56) Low pass filter is set to Through. <Crossover Network Setup> (page 57)
section on <INSTALLATION MANUAL>.
! Cannot select the output destination of the
subsource in the Dual zone. Cannot adjust the volume of the rear speakers. The Dual zone function is disabled. <Zone Control> (page 80)

Disc source

? The specified disc does not play, but another

one plays instead.

The specified disc is quite dirty. Clean the disc. The disc is severely scratched. Try another disc instead.
! Cannot play audio files.
"CD Read" of <System Setup> (page 60) is set

to "2".

Audio file source

! Cannot Folder select.

The Scan play or Random play function is
? The sound skips when an Audio file is being

played.

The media is scratched or dirty. Clean the media, referring to the CD

enabled.

! Cannot perform Repeat play.
The PBC function is enabled.
cleaning of the section on <Handling discs> (page 6).
The recording condition is bad. Record the media again or use another
! Cannot set up the equalizer.
Cannot set up the crossover network. The Dual zone function is enabled. <Zone Control> (page 80)

media.

Navigation
! Cannot watch the source selected as AV-OUT
in the rear monitor. A source control screen is displayed in front. <AV lnterface Setup> (page 62) "AV-OUT Graphic Output" of <AV Interface Setup> is set to "Black".

Audio section

Maximum Power (Front & Rear) : 50 W x 4 Full Bandwidth Power (Front & Rear) (PWR DIN 45324, +B=14.4V) : 30 W x 4 Preout Level (V) : 2 V/ 10 k Preout Impedance : 600 Speaker Impedance :48 Tone action Bass : 100 Hz 10 dB Middle : 1 kHz 10 dB Treble : 10 kHz 10 dB
Operating voltage : 14.4 V (10.V allowable) Current Consumption : 15 A (Max) Dimensions (W H D) : 158 mm Operational Temperature Range : -10 C +60 C Storage Temperature Range : -20 C +85 C Weight (DNX5220BT/DNX5220) : 1.90 kg Weight (DDX5022/DDX5022Y/DDX52RY) : 1.87 kg
Bluetooth section (DNX5220BT only)
Technology : Bluetooth Ver.1.2 Certified Frequency : 2.402 2.480 GHz Output Power : +4 dBm (MAX), 0 dBm (AVE), Power Class 2 Profile HFP (Hands Free Profile), SPP (Serial Port Profile), HSP (Headset Profile), A2DP (Advanced Audio Distribution Profile), AVRCP (Audio/Video Remote Control Profile), OPP (Object Push Profile), PBAP (Phonebook Access Profile), SYNC
Specifications subject to change without notice. Although the effective pixels for the liquid crystal panel is given as 99.99% or more, 0.01% of pixels may not light or may light incorrectly.
The marking of products using lasers (Except for some areas)

CLASS 1 LASER PRODUCT

The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.
Information on Disposal of Old Electrical and Electronic Equipment (applicable for EU countries that have adopted separate waste collection systems)
Products with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State.

About DivX

DivX is a popular media technology created by DivX, Inc. DivX media Files contain highly compressed video with high visual quality that maintains a relatively small file size. DivX files can also include advanced media features like menus, subtitles, and alternate audio tracks. Many DivX media files are available for download online, and you can create your own using your personal content and easy-to-use tools from DivX.com.