4015-2 Yanokuchi, Inagi-city, Tokyo 206-0812 Japan 2006 KORG INC.

Connections Anschlsse

Liaisons

Option: AC ADAPTER

DC4.5V LINE IN LINE IN LINE OUT
MP3 PLAYER DJ MIXER CD PLAYER MIXER

PHONES

Precautions

Location

Using the unit in the following locations can result in a malfunction. In direct sunlight Locations of extreme temperature or humidity Excessively dusty or dirty locations Locations of excessive vibration Close to magnetic fields
THE FCC REGULATION WARNING (for U.S.A.)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Unauthorized changes or modification to this system can void the users authority to operate this equipment.

Power supply

Please connect the designated AC adapter to an AC outlet having the correct voltage. Do not connect it to an AC outlet having a voltage other than that specified for your unit.
Interference with other electrical devices
Radios and televisions placed nearby may experience reception interference. Operate this unit at a suitable distance from radios and televisions.

Handling

To avoid breakage, do not apply excessive force to the switches or controls.
If the exterior becomes dirty, wipe it with a clean, dry cloth. Do not use liquid cleaners such as benzene or thinner, or cleaning compounds or flammable polishes.

Keep this manual

After reading this manual, please keep it for later reference.
CE mark for European Harmonized Standards
CE mark which is attached to our companys products of AC mains operated apparatus until December 31, 1996 means it conforms to EMC Directive (89/336/EEC) and CE mark Directive (93/68/EEC). And, CE mark which is attached after January 1, 1997 means it conforms to EMC Directive (89/336/ EEC), CE mark Directive (93/68/EEC) and Low Voltage Directive (73/23/EEC). Also, CE mark which is attached to our companys products of Battery operated apparatus means it conforms to EMC Directive (89/336/EEC) and CE mark Directive (93/68/EEC).
Keeping foreign matter out of your equipment
Never set any container with liquid in it near this equipment. If liquid gets into the equipment, it could cause a breakdown, fire, or electrical shock. Be careful not to let metal objects get into the equipment. If something does slip into the equipment, unplug the AC adapter from the wall outlet. Then contact your nearest Korg dealer or the store where the equipment was purchased.
* Company names, product names, and names of formats etc. are the trademarks or registered trademarks of their respective owners.
IMPORTANT NOTICE TO CONSUMERS
This product has been manufactured according to strict specifications and voltage requirements that are applicable in the country in which it is intended that this product should be used. If you have purchased this product via the internet, through mail order, and/or via a telephone sale, you must verify that this product is intended to be used in the country in which you reside. WARNING: Use of this product in any country other than that for which it is intended could be dangerous and could invalidate the manufacturers or distributors warranty. Please also retain your receipt as proof of purchase otherwise your product may be disqualified from the manufacturers or distributors warranty.
Thank you for purchasing the KAOSS PAD miniKP Dynamic Effect Processor. For trouble-free enjoyment of the mini-KPs fullest potential, please read this manual carefully and use the mini-KP only as directed.

Turning the power on/off

Turning the power on
Set the ON/STANDBY switch to the ON position; this turns the power on.

Parts of the mini-KP

DC jack LINE IN jacks PROGRAM/BPM knob PEAK indicator Display ON/STANDBY switch TAP/BPM button MEMORY B button MEMORY A button LINE OUT jacks

Turning the power off

Set the ON/STANDBY switch to the STANDBY position; this will turn the power off. If youre using the mini-KP on battery power, dont forget to turn the power off when you are done using it.

Connection setting

Hold down the MEMORY A button and press the B button. Use the PROG/VALUE knob to select dir (direct) or snd (send).
HOLD indicator HOLD button
Touch pad VOLUME PHONES jack

Replacing the batteries

The display will indicate Lo when the batteries are running low. Please replace the batteries as soon as possible. You must turn off the power switch before replacing the batteries. The included batteries are provided so that you can verify that the unit operates correctly, and may have a shorter lifespan than expected. Use only alkaline batteries. If the batteries become unusable, remove them immediately. You should also remove the batteries if you won't be using the unit for an extended time. 1. On the bottom panel, slide the battery case cover in the direction of the arrow to open it. 2. Install four AA batteries. Make sure that the batteries are inserted in the correct polarity (+, -). 3. Close the battery case cover.
Choose the dir setting if you are connecting an instrument or audio device directly to the miniKP (as in the diagram above). Choose the snd setting if the mini-KP will be connected to the effect send and return jacks of your mixer or other device. To return to the normal play mode, once again hold down the MEMORY A button and press the B button. The mini-KP will also return to the normal play mode (program selection state) after about three seconds if no additional setting operations are performed. This setting will be remembered even when the power is turned off.

About the input level

The PEAK indicator will light red if the input signal level is too high. In this case, reduce the output volume of the device that's connected to the mini-KP. Use the VOLUME knob on the front to adjust the headphone volume.

Operation

Operating the touch pad
You can control the sound by rubbing or tapping your finger on the touch pad. Each axis (X, Y) will provide realtime control of a different effect parameter.
If you press the HOLD button while your finger is on the touch pad, you can take your finger away and the effect will continue to play as if your finger was still on the touch pad, and at the same location as when you pressed the HOLD button.

Storing the current settings to a MEMORY button
Select the program that you want to store, and adjust the effect depth. If you want to store the Hold state, press the HOLD button to turn it on. The position at which you last touched the pad will be stored as the held position on the touch pad. Hold down one of the MEMORY buttons (A or B) and press the HOLD button; the current settings will be stored to that MEMORY button.
Selecting an effect program
Turn the PROG/VALUE knob to select an effect program 0099.

FX RELEASE setting

Hold down the MEMORY B button and press the TAP button, and then use the PROG/VALUE knob to select r.On (FX Release On) or r.OF (FX Release Off).

Setting the BPM

When you press the TAP button, the current BPM setting will be displayed. Hit the TAP button several times in tempo with your song, and the mini-KP will detect the corresponding BPM value and use it as the current setting. While the BPM value is displayed, you can also adjust the BPM value by turning the PROG/VALUE knob. If you hold down the TAP button for an extended time, the mini-KP will switch from the BPM setting back to program selection. The mini-KP will also return to the program selection state if you havent performed any setting operation for five seconds.
To return to the normal play mode, once again hold down the MEMORY B button and press the TAP button. The mini-KP will also return to the normal play mode (program selection state) after about three seconds if no additional setting operations are performed. This setting will be remembered even when the power is turned off.

What is FX RELEASE?

With FX RELEASE, the moment you take your hand off the touch pad, a delay effect synchronized to the current BPM will be applied, and will then gradually diminish. This allows you to make smoother transitions and avoid the abrupt change from a hard-edge effect back to the original and unaffected signal.
Restoring the factory settings
Hold down the TAP button and the MEMORY A button as you turn on the power; all settings will return to their factory-set state.

Specifications

Connectors: LINE IN jacks (RCA phono jacks) LINE OUT jacks (RCA phono jacks) HEADPHONES jack (Stereo 1/ 8" mini phone jack) Power supply: four alkaline AA (LR6) batteries (6 V) Battery life: approximately five hours (with alkaline batteries) Dimensions: 106 mm (W) x 129 mm (D) x 29 mm (H) / 4.17" (W) x 5.08" (D) x 1.14" (H) Weight: 154 g / 5.43 oz. (without batteries) Included items: owner's manual, four AA test batteries Options (sold separately): AC adapter ( )
Adjusting the effect depth
Hold down the MEMORY A button and press the TAP button, and then use the PROG/VALUE knob to set the effect depth. To return to the normal play mode, once again hold down the MEMORY A button and press the TAP button. The mini-KP will also return to the normal play mode (program selection state) after about fifteen seconds if no additional setting operations are performed.
Using the MEMORY A/B buttons
Each of the MEMORY A/B buttons be used to store an effect program, the effect depth, the HOLD button on/off status and the held position on the touch pad. Then you can simply press the MEMORY A or B button to instantly recall the stored settings.
* Specifications and appearance are subject to change without notice for improvement.

Prcautions

Emplacement
Lutilisation de cet instrument dans les endroits suivants peut en entraner le mauvais fonctionnement. En plein soleil Endroits trs chauds ou trs humides Endroits sales ou fort poussireux Endroits soumis de fortes vibrations A proximit de champs magntiques
Marque CE pour les normes europennes harmonises
La marque CE appose sur tous les produits de notre firme fonctionnant sur secteur jusqu'au 31 dcembre 1996 signifie que ces appareils rpondent la Directive EMC (89/336/CEE) et la Directive concernant la marque CE (93/68/CEE). La marque CE appose aprs le 1 janvier 1997 signifie que ces appareils sont conformes la Directive EMC (89/336/CEE), la Directive concernant la marque CE (93/68/CEE) ainsi qu' la Directive Basse Tension (73/23/CEE). La marque CE appose sur tous les produits de notre firme fonctionnant sur piles signifie que ces appareils rpondent la Directive EMC (89/336/ CEE) et la Directive concernant la marque CE (93/68/CEE).

Alimentation

Branchez ladaptateur secteur fourni une prise secteur de tension approprie. Evitez de brancher ladaptateur une prise de courant dont la tension ne correspond pas celle pour laquelle lappareil est conu.
Interfrences avec dautres appareils lectriques
Les postes de radio et de tlvision situs proximit peuvent par consquent souffrir dinterfrences la rception. Veuillez ds lors faire fonctionner cet appareil une distance raisonnable de postes de radio et de tlvision.

Technische Daten

LINE IN-Buchsen (RCA-Klinkenbuchsen) LINE OUT-Buchsen (RCA-Klinkenbuchsen) HEADPHONES-Buchse (Stereo 1/ 8-Zoll-Klinkenbuchse) Stromversorgung: Vier Alkali-Mignonzellen (AA, R6) (6 V) Batterielebensdauer: Ca. fnf Stunden (mit Alkalibatterien) Abmessungen: 106mm (B) x 129mm (T) x 29mm (H) Gewicht: 154 g (ohne Batterien) Lieferumfang: Bedienungshandbuch, vier Alkali"Test"-Mignonzellen (AA, R6) Optionen (getrennt erhltlich): Netzteil ( ) Anschlsse:
Verwendung der MEMORY A/B-Tasten
Jede der MEMORY A/B-Tasten kann zur Speicherung eines Effektprogramms, der Effekttiefe, der Ein/AusStellung der HOLD-Taste und der gehaltenen Position des Touch-Pad verwendet werden. Dann knnen Sie einfach die Taste MEMORY A oder B drcken, um die gespeicherten Einstellungen jederzeit abzurufen.
* nderungen des Designs und der technischen Daten ohne Vorankndigung bleiben im Sinne stndiger Verbesserungen vorbehalten.

EFFECT PROGRAM LIST

Program Name LPF(Low Pass Filter) HPF(High Pass Filter) BPF+(Band Pass Filter+) 72dB/oct LPF LPF & Delay HPF & Delay BPF+ & Delay LPF & Reverb HPF & Reverb BPF+&Reverb Morphing Filter Radio Filter Radio Isolator Isolator Isolator & Distortion Isolator & Delay Jet(Manual Flanger) Manual Phaser Talk Filter Digi Talk Ring Mod & HPF Pitch Shifter & HPF Mid Pitch Shifter Pitch Shifter & Delay Broken Modulation Fuzz Distortion Decimator Decimator & HPF LFO LPF LFO HPF LFO BPF+ LFO HPF+ & Delay Infinite LFO HPF+ Random LFO LPF Random LFO HPF+ Flanger Deep Flanger Mid Flanger Flanger & LPF Flanger & Delay Infinite LFO Flanger Phaser Mid Phaser Phaser & Delay Step Phaser Auto Pan Mid Auto Pan Slicer Mid Slicer Slicer & LPF X AXIS Cutoff Frequency Cutoff Frequency Cutoff Frequency Cutoff Frequency Delay Time Delay Time Delay Time Reverb Depth Reverb Depth Reverb Depth LPF - BPF+ - HPF Band Width Mid+Low - Mid - Mid+Hi Low - Mid - Hi Low - Mid - Hi Low - Mid - Hi Delay Time Frequency 1st Formant 1st Formant Ring Mod Frequency Pitch Shift Pitch Shift Pitch Shift Frequency Low Boost - Low Cut Sampling Frequency Decimator Frequency & Bit LFO Speed LFO Speed LFO Speed Delay Time LFO Speed LFO Speed LFO Speed LFO Speed LFO Speed LFO Speed Flanger LFO Speed Delay Time LFO Speed LFO Speed LFO Speed Delay Time Frequency LFO Speed LFO Speed LFO Speed LFO Speed Slicer LFO Speed Y AXIS Fx Release BPM Sync Resonance Resonance Resonance Resonance LPF Cutoff & Resonance HPF Cutoff & Resonance BPF Cutoff & Resonance LPF Cutoff & Resonance HPF Cutoff & Resonance BPF Cutoff & Resonance Cutoff & Resonance Noise Level Level & Drive Level & Drive Distortion Delay Depth Feedback Resonance 2nd Formant 2nd Formant HPF Cutoff & Resonance HPF Cutoff & Resonance Mix Balance(Original - Mix - Pitch Shift). Delay Depth Depth Distortion Sampling Bit HPF Cutoff & Resonance Resonance Resonance Resonance HPF Level, Delay Depth Resonance LFO Depth LFO Depth Feedback Feedback Feedback LPF Cutoff & Resonance Flanger Feedback, Delay Depth Feedback Resonance Resonance Phaser Resonance, Delay Depth Resonance Mono Mix - Auto Pan LFO Depth LFO Depth LFO Depth LPF Cutoff & Resonance

Program Name Slicer & HPF Delay Smooth Delay Low Cut Delay Ping Pong Delay LCR Delay 3 band Delay Multi Tap Delay BPF Time Slide Reverse Delay & HPF Reverse Delay Mix Gate Reverb & Delay Delay & Reverb Tape Echo Dub Echo Feedback Echo Reverb Reverb 2 Spring Reverb Gate Reverb Reverse Gate Reverb 3 band Gate Reverb Grain Shifter Mid Grain Shifter Mid Grain Shifter+ Grain&HPF Grain&HPF+ Looper Forward/Rverse Vinyl Looper Rewind Spin Looper Looper & LPF Looper & HPF Looper & Flanger Looper & Pitch Shifter Looper & Decimator Looper, Isolator & HPF Looper & Isolator+ Bass Looper Looper & Oscillator Looper & Noise Unison Saw Bass Unison Squ Bass Unison Saw Synth Unison Squ Synth Metalic Synth Siren LFO Sin LFO Squ Noise Synth & Looper
X AXIS Slicer LFO Speed Delay Time Delay Time Delay Time Delay Time Delay Time Low - Mid - Hi Delay Tone Delay Time Delay Time Delay Time Delay Time Delay Time Delay Time Delay Time Delay Time Reverb Time Reverb Time Reverb Time Gate Time Gate Time Low - Mid - Hi Cycle Speed Cycle Speed Cycle Speed Grain Cycle Speed & Length Grain Speed Looper Beat Looper Beat Looper Beat Looper Beat Looper Beat Looper Beat Looper Beat Looper Beat Looper Beat Looper Beat Looper Beat Looper Beat Looper Beat Synth Pitch Synth Pitch Synth Pitch Synth Pitch Synth Pitch, BPF Cutoff etc. LFO Speed etc. Synth Pitch, LFO Speed Synth Pitch, LFO Speed Noise Tone Synth Tone
Y AXIS HPF Cutoff & Resonance Delay Depth Delay Depth Delay Depth Delay Depth Delay Depth Delay Depth Delay Depth BPF Frequency HPF Cutoff & Resonance Delay Depth Delay Depth, Reverb Depth Delay Depth, Reverb Depth Delay Depth Delay Tone Delay Depth Reverb Depth Reverb Depth Reverb Depth Reverb Depth Reverb Depth Reverb Depth Length Length Length HPF Cutoff & Resonance HPF Cutoff & Resonance Reverse - Forward(Cross Fade) Reverse - Forward (Pitch) Rewind Spin - Forward LPF Cutoff & Resonance HPF Cutoff & Resonance Flanger Feedback Pitch Shift Decimator Frequency & Bit HPF Cutoff & Resonance Low - Mid - Hi Reverse - Forward(Cross Fade) Oscillator Pitch, etc. Noise Level, etc. HPF Cutoff & Resonance HPF Cutoff & Resonance HPF Cutoff & Resonance HPF Cutoff & Resonance LFO Speed etc. LFO Intensity HPF Cutoff & Resonance HPF Cutoff & Resonance Noise Level Looper Off - Looper On (Beat)

Fx Release BPM Sync