SAFETY INSTRUCTIONS FOR INSTALLATION
To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following: Properly ground dryer to conform with all governing codes and ordinances. Follow details in the installation instructions. Electrical shock can result if the dryer is not properly grounded. Before use, the dryer must be properly installed as described in this manual. Electrical shock can result if the dryer is not properly grounded. Install and store the dryer where it will not be exposed to temperatures below freezing or exposed to the weather. All repairs and servicing must be performed by an authorized servicer unless specifically recommended in this Owners Guide. Use only authorized factory parts. Failure to follow this warning can cause serious injury, fire, electrical shock, or death. To reduce the risk of electric shock, do not install the dryer in humid spaces. Failure to follow this warning can cause serious injury, fire, electrical shock, or death. Connect to a properly rated, protected, and sized power circuit to avoid electrical overload. Improper power circuit can melt, creating electrical shock and/or fire hazard. Remove all packing items and dispose of all shipping materials properly. Failure to do so can result in death, explosion, fire, or burns. Place dryer at least 18 in. above the floor for a garage installation. Failure to do so can result in death, explosion, fire, or burns. Keep all packaging from children. Packaging material can be dangerous for children. There is a risk of suffocation. Do not install nearby heat item. Such as stove, cooking oven. Failure to do so can cause deform, smoke and fire. Do not place candle and cigarettes on top of the product. Failure to do so can cause deform, smoke and fire. Remove all protective vinyl film from the product. Failure to do so can cause deform, smoke and fire.
Exhaust/Ducting: Gas dryers MUST be exhausted to the outside. Failure to follow these instructions can result in fire or death. The dryer exhaust system must be exhausted to the outside of the dwelling. If the dryer is not exhausted outdoors, some fine lint and large amounts of moisture will be expelled into the laundry area. An accumulation of lint in any area of the home can create a health and fire hazard. Use only rigid metal or flexible metal 4-in. diameter ductwork inside the dryer cabinet or for exhausting to the outside. Use of plastic or other combustible ductwork can cause a fire. Punctured ductwork can cause a fire if it collapses or becomes otherwise restricted in use or during installation. Ductwork is not provided with the dryer, and you should obtain the necessary ductwork locally. The end cap should have hinged dampers to prevent backdraft when the dryer is not in use. Failure to follow these instructions can result in fire or death. The exhaust duct must be 4 in. (10 cm) in diameter with no obstructions. The exhaust duct should be kept as short as possible. Make sure to clean any old ducts before installing your new dryer. Failure to follow these instructions can result in fire or death. Rigid or semi rigid metal ducting is recommended for use between the dryer and the wall. In special installations when it is impossible to make a connection with the above recommendations, a ULlisted flexible metal transition duct may be used between the dryer and wall connection only. The use of this ducting will affect drying time. Failure to follow these instructions can result in fire or death. DO NOT use sheet metal screws or other fasteners which extend into the duct that could catch lint and reduce the efficiency of the exhaust system. Secure all joints with duct tape. For complete details, follow the Installation Instructions. Failure to follow these instructions can result in fire or death.

3/8" NPT Gas Connection AGA/CSA-Certified Stainless Steel Flexible Connector
1/8" NPT Pipe Plug Gas Supply Shutoff Valve

Electrical Connection

Plug dryer into a 120-VAC, 60-Hz. grounded 3-prong outlet.
High-Altitude Installations
The BTU rating of this dryer is AGA-certified for elevations below 10,000 feet. If your gas dryer is being installed at an elevation above 10,000 feet, it must be derated by a qualified technician or gas supplier.
CONNECTING ELECTRIC DRYERS
To help prevent fire, electric shock, serious injury, or death, the wiring and grounding must conform to the latest edition of the National Electrical Code, ANSI/NFPA 70 and all applicable local regulations. Please contact a qualified electrician to check your homes wiring and fuses to ensure that your home has adequate electrical power to operate the dryer.
Electrical Requirements for Electric Models Only
To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following: This dryer must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the dryer. Failure to do so can result in fire, explosion, or death. The dryer has its own terminal block that must be connected to a separate 240 VAC, 60-Hertz, single-phase circuit, fused at 30 amperes (the circuit must be fused on both sides of the line). ELECTRICAL SERVICE FOR THE DRYER SHOULD BE OF THE MAXIMUM RATE VOLTAGE LISTED ON THE NAMEPLATE. DO NOT CONNECT DRYER TO 110-, 115-, OR 120-VOLT CIRCUIT. Heating elements are available for field installation in dryers which are to be connected to an electrical service of a different voltage than that listed on the rating plate. Failure to follow these instructions can result in fire, explosion, or death. If branch circuit to dryer is 15 ft. (4.5 m) or less in length, use UL (Underwriters Laboratories) listed No.-10 AWG wire (copper wire only), or as required by local codes. If over 15 ft. (4.50 m), use UL-listed No.-8 AWG wire (copper wire only), or as required by local codes. Allow sufficient slack in wiring so dryer can be moved from its normal location when necessary. Failure to do so can result in fire, explosion, or death. The power cord (pigtail) connection between wall receptacle and dryer terminal block IS NOT supplied with dryer. Type of pigtail and gauge of wire must conform to local codes and with instructions on the following pages. Failure to follow these instructions can result in fire, explosion, or death. A 4-wire connection is required for all mobile and manufactured home installations, as well as all new construction after January 1, 1996. A 4-wire connection must be used where local codes do not permit grounding through the neutral wire. Failure to do so can result in fire, explosion, or death.

Three-Wire Connection for Electric Dryers: Direct Wire
A 3-wire connection is NOT permitted on new construction after January 1, 1996. A UL-listed strain relief is required. Use UL-listed 3-wire #10 AWG-minimum copper conductor cable. Allow at least 5 ft (1.5 m) length to allow for removal and reinstallation of the dryer.
Terminal Block UL-Listed Strain Relief
UL-Listed 3-Wire Power Cord
Remove 312 inches (8.9 cm) of the outer covering from the wire. Strip 1 inch (2.5 cm) insulation from each wire. Bend the ends of the three wires into a hook shape.

Hot Black)

Neutral Hot (White) (Red)
3 Attach the two hot leads of the power cord to the outer terminal block screws. Attach the neutral wire to the center terminal block screw. Connect the external ground (if required by local codes) to the green ground screw. Tighten all screws securely. Reinstall the terminal block access cover.
SPECIAL REQUIREMENTS FOR MANUFACTURED OR MOBILE HOMES
Any installation in a manufactured or mobile home must comply with the Manufactured Home Construction and Safety Standards Title 24 CFR, Part 32-80 or Standard CAN/CSA0Z240 MH and local codes and ordinances. If you are uncertain whether your proposed installation will comply with these standards, please contact a service and installation professional for assistance. A gas dryer must be permanently attached to the floor. The electrical connection for an electric dryer must be a 4-wire connection. More detailed information concerning the electrical connection is provided in the section Connecting Electric Dryers. To reduce the risk of combustion and fire, the dryer must be vented to the outside. DO NOT vent the dryer under a manufactured home or mobile home. Electric dryers may be vented to the outside using the back, left, right, or bottom panel. Gas dryers may be vented to the outside using the back, left, or bottom panel. Gas dryers may not be vented to the outside using the right side panel because of the burner housing. The dryer exhaust duct must be affixed securely to the manufactured or mobile home structure, and the exhaust duct must be made of a material that will resist fire and combustion. It is recommended that you use a rigid or flexible metal duct. DO NOT connect the dryer exhaust duct to any other duct, vent, chimney, or other exhaust duct. Make sure the dryer has adequate access to outside fresh air to ensure proper operation. The opening for outside fresh air must be at least 25 in2 (163 cm2). It is important that the clearance of the duct from any combustible construction be at least 2 in. (5 cm), and when venting the dryer to the outdoors, the dryer can be installed with a clearance of 1 in. (2.5 cm) at the sides and back of the dryer. Please be aware that venting materials are not supplied with the dryer. You should obtain the venting materials necessary for proper installation.

CHECK THE LINT FILTER BEFORE EVERY LOAD
Always make sure the lint filter is clean before starting a new load; a clogged lint filter will increase drying times. To clean, pull the lint filter straight up and roll any lint off the filter with your fingers. Do not rinse or wash the filter to remove lint. Push the lint filter firmly back into place. See Care and Cleaning for more information. Always ensure the lint filter is properly installed before running the dryer. Running the dryer with a loose or missing lint filter may damage the dryer and articles in the dryer.

Lint Filter

CONTROL PANEL FEATURES
Following are instructions for starting and using your new dryer. Please refer to specific sections of this manual for more detailed information. Important Warning: To reduce the risk of fire, electric shock, or injury to persons, read this entire manual, including the Important Safety Instructions, before operating this dryer. 4
CYCLE SETTING BUTTONS Use these buttons to select the desired cycle settings for the selected cycle. The current settings are shown in the display. Press the button for that option to view and select other settings. 6 LCD DISPLAY The display shows the settings, estimated time remaining, options, and status messages for your dryer. 7 OPTION BUTTONS The OPTION buttons allow you to select additional cycle options. Certain buttons feature a special function (see the following pages for details) that can be activated by pressing and holding that option button. 8 HELPFUL STEAM FUNCTIONS LGs new steam technology allows you to inject fabrics with a swirling jet of hot steam to refresh clothes, reduce static, and make ironing easier. Simply select the steamfresh cycle, or you can add a STEAM option to selected cycles. For detailed information about the individual options, please see the following pages.
1 POWER ON/OFF BUTTON Press to turn the dryer ON. Press again to turn the dryer OFF. NOTE: Pressing the ON/OFF button during a cycle will cancel that cycle and any load settings will be lost. 2 CYCLE SELECTOR KNOB Turn this knob to select the desired cycle. Once the desired cycle has been selected, the standard presets will be shown in the display. On MANUAL DRY cycles, these settings can be adjusted using the cycle settings buttons anytime before starting the cycle. 3 START/PAUSE BUTTON Press this button to START the selected cycle. If the dryer is running, use this button to PAUSE the cycle without losing the current settings. NOTE: If you do not press the START/PAUSE button to resume a cycle within 4 minutes, the dryer automatically turns off. 4 MORE TIME/LESS TIME BUTTONS To adjust the drying time, use these buttons with MANUAL DRY, TIME DRY, and steamfresh cycles, as well as the reduce static and easy iron options. Press the MORE TIME button to increase the selected manual cycle time by a minute; press LESS TIME to decrease the cycle time by a minute.

END OF CYCLE

1. Possible causes
Ductwork is slightly too long or has too many turns/restrictions. Partial blockage of the ductwork due to lint buildup.

2. Solutions

nstall a shorter or straighter duct run. See I the Installation Instructions. uctwork should be checked/cleaned soon. D Dryer can be used in this condition, but drying times may be longer. If END OF CYCLE is displayed after the end of cycle, it will be off in 4 minutes. If POWER button is pressed or the door is opened, power will be off immediately.
4 bars are displayed In the LCD screen.
Ductwork is too long or has too many turns/ restrictions. Significant blockage of the ductwork due to lint buildup or debris.
Install a shorter or straighter duct run. See the Installation Instructions. uctwork should be checked/cleaned soon. D D ryer can be used in this condition, but drying times may be longer. f NEED FLOW CHECK is displayed after I the end of cycle, it will be off in 2 hours. If POWER button is pressed or the door is opened, power will be off immediately.

OPERATING THE Dryer

Once you have loaded the dryer: 1 Press the ON/OFF button to turn on the dryer. The lights around the cycle selector knob will illuminate. 2 Turn the cycle selector knob to the desired cycle. The display will show the preset Dry Level, Temperature, Time, and Option settings for that cycle. 3 If you would like to change the settings for that cycle, press the option button(s) to display additional settings for that option. Press the button again to cycle through the settings until the desired setting is highlighted.

CYCLE SETTING BUTTONS

SENSOR DRY cycles have preset settings that are selected automatically. MANUAL DRY cycles have default settings, but you may also customize the settings using the cycle setting buttons. Press the button for that option to view and select other settings. NOTE: To protect your garments, not every dryness level, temperature, or option is available with every cycle. See the Cycle Guide for details.

DRY LEVEL

Selects the level of dryness for the cycle. Press the DRY LEVEL button repeatedly to scroll through available settings. This option is only available with SENSOR DRY cycles. The dryer will automatically adjust the cycle time. Selecting VERY DRY or MORE DRY will increase the cycle time, while LESS DRY or DAMP DRY will decrease the cycle time. Use a LESS DRY or DAMP DRY setting for items that you wish to iron.

ANTI BACTERIAL

This option will add a high heat setting to reduce bacteria. It can only be used with the HEAVY DUTY, COTTON/ TOWELS, and NORMAL cycles. NOTE: Do not use this cycle with delicate fabrics.

WRINKLE CARE

Selecting this option will tumble the load periodically for up to 3 hours after the selected cycle, or until the door is opened. This is helpful in preventing wrinkles when you are unable to immediately remove items from the dryer.

Certified by NSF

NSF International (formerly the National Sanitation Foundation), certifies that ANTI BACTERIAL Option reduces 99.9% of bacteria on laundry, and none of bacteria will carry over onto the next laundry load.

DAMP DRY BEEP

With this option, the dryer will beep when the load is approximately 80% dry. This allows you to remove faster- drying lightweight items or items that you would like to iron or hang while still slightly damp.

SPECIAL FUNCTIONS

The option buttons also activate special functions, including CHILD LOCK, RACK DRY and LANGUAGE. Press and hold the option button marked with the special function for 3 seconds to activate.
* RACK DRY RACK DRY with items, such as Use
LOCK * CHILD Use this option to prevent unwanted
wool sweaters, silk, and lingerie, that should dry flat. RACK DRY can also be used with items that should not be tumbled dry, such as gym shoes or stuffed animals. Press and hold the WRINKLE CARE button for 3 seconds to activate or deactivate the RACK DRY function. NOTE: NEVER use the rack with a tumble dry cycle.
use of the dryer or to keep cycle settings from being changed while the dryer is operating. Press and hold the ANTI BACTERIAL button for 3 seconds to activate or deactivate the CHILD LOCK function. The lock icon will be shown in the display, and all controls are disabled except the ON/OFF button.
To Install the Drying Rack
1 With the dryer door open, slide the rack into the dryer drum.
* LANGUAGEmay change the language shown You

in the display from English to French or Spanish. Press and hold the DAMP DRY BEEP button for 3 seconds until the display changes. Then select the desired language by pressing the DAMP DRY BEEP button. Once set, the selected language will remain in memory, even if the Dryer is turned off or unplugged.
2 Make sure it is seated evenly on the edge of the inner door rim and resting flat on the inside of the dryer. NOTE: Be sure to remove the drying rack after using the RACK DRY cycle.

CUSTOM PROGRAM

If you have a special combination of settings that you use frequently, you can save these settings as a CUSTOM PROGRAM. NOTE: You may only save one custom program at a time. Pressing and holding the CUSTOM PROGRAM button will overwrite any previously saved custom program.
a *1 To SavetheCustom Program: selector Turn on dryer and turn the cycle
knob to select the desired cycle. 2 Use the cycle setting buttons to adjust the settings for that cycle. 3 Press the cycle option button(s) for the option you would like to add. A confirmation message will be shown in the display. 4 Press and hold the CUSTOM PROGRAM button for 3 seconds.
To Recall a Custom Program:
1 Turn on the dryer. 2 Press the CUSTOM PROGRAM button. 3 Press the START/PAUSE button to start the cycle.

STEAM FUNCTIONS

To Fill the Steam Feeder
1 Pull out the drawer. 3 Fill the steam feeder to MAX with water.

Water ONLY

Drawer

Steam Feeder

2 Lift out the steam feeder.
4 Place the steam feeder in the drawer; then push in the drawer until it clicks into place.
IMPORTANT NOTES ABOUT STEAM CYCLES
Before using a Steam Cycle, the steam feeder must be filled with water up to the MAX line. If not, an Error message or ADD WATER will be displayed. Make sure that the steam feeder is filled with water and the drawer is completely closed. Turn the dryer off then restart the Steam Cycle. O nly use water. Do not fill the steam feeder with foreign substances, rinse agents, or detergents. Before moving the dryer, make sure the steam feeder is empty. Do not use distilled water; the water level sensor in the steam generator will not work. Be careful to put the Steam Feeder otherwise water will be overflow. Wipe up any spilled water around the Steam Feeder and the drawer before starting the dryer.
wWARNING: liquids such as gasoline, dry-cleaning solvents, or other flammable or explosive o not fill the steam feeder with D
substances. They give off vapors that could explode. Do not fill the steam feeder with hot water (over 86F/30C). Do not drink water from the steam feeder.

STEAM FUNCTIONS (cont.)

LGs new steam technology allows you to inject fabrics with a swirling jet of hot steam to refresh clothes, reduce static, and make ironing easier. Simply select the SteamFresh cycle, or you can add a Steam option to selected cycles.

Using the Steam Options:

This option injects steam late in the drying cycle to reduce the static electricity caused by dry fabrics rubbing together. Change the amount of time for the cycle by pressing the MORE TIME or LESS TIME button, depending on the load (quantity of items). The display will show the recommended number of items, such as 7, 9, 11, 14, 16, or 18. The EASY IRON option provides uniform, properly dampened fabrics for ironing, which can save time and make ironing easier. Change the amount of time for the cycle by pressing the MORE TIME or LESS TIME button, depending on the load (quantity of items). The display will show the recommended number of items, such as 1, 2, 3, 4, or 5. The REDUCE STATIC and EASY IRON options can only be used with the HEAVY DUTY, COTTON/TOWELS, NORMAL and PERM. PRESS, DELICATES and TIME DRY cycles. NOTES: When Sensor Dry is selected with the REDUCE STATIC option, a Dry level of Less or DAMP cannot be selected. The REDUCE STATIC or EASY IRON option may also be selected during TIME DRY cycles. After the Steam option is selected in TIME DRY, the MORE TIME or LESS TIME buttons will change the steam time ONLY. After pressing START/PAUSE, the MORE TIME or LESS TIME buttons will be disabled.
Using the SteamFresh Cycle
SteamFresh uses the power of steam alone to quickly reduce wrinkles and odor in fabrics. It brings new life to wrinkled clothes that have been stored for an extended time and makes heavily wrinkled clothes easier to iron. SteamFresh can also be used to help reduce odors in fabrics. NOTES: EDUCE STATIC or EASY IRON options can R also be used during the STEAMFRESH cycle. epending on the load (quantity of items), you D may change the amount of time for the cycle by pressing the MORE TIME or LESS TIME button. The display will show 3, 5, or BULKY LOAD. 3 means 3 or fewer items, 5 is for 4 or 5 items, and BULKY LOAD indicates a large load such as a comforter.

To Use the SteamFresh Cycle:
1 Turn on the dryer and turn the cycle selector knob to select the SteamFresh cycle. 2 To add an option function, select REDUCE STATIC, EASY IRON, or WRINKLE CARE. 3 Depending on the load (quantity of items), steam time can be changed by pressing the MORE TIME or LESS TIME buttons. 4 Press START/PAUSE button to start the cycle.
To Add STEAM to a Standard Cycle:
1 Turn on the dryer and turn the cycle selector knob to select the desired cycle. 2 Use the cycle setting buttons to adjust the settings for that cycle. 3 Press the Steam option button for the Steam option you would like to add. Then adjust for the load size using the MORE TIME or LESS TIME buttons. 4 Press START/PAUSE button to start the cycle.
Using the STEAMSANITARYTM cycle
New STEAMSANITARYTM cycle is ideal for sanitizing non washable items quickly and easily using the power of steam alone. Recommend to use this cycle for cotton and polyester material. (Do NOT use for urethane foam, Down feathers or delicates items)
Do not open the dryer door during Steam Cycles. Steam can cause severe burns. Do not fill the steam feeder with gasoline, dry-cleaning solvents, or other flammable or explosive substances. They give off vapors vapors that could explode. Do not drink water from the steam feeder. Do not fill the steam feeder with hot water (over 86F/30C). Do not touch the steam nozzle in the drum during or after the steam cycle.

STEAM CYCLE GUIDE

STEAM DEFAULT TIME TEMP. CONTROL
IMPORTANT NOTES ABOUT STEAM CYCLES: team may not be clearly visible during the S Steam Cycles. This is normal. o not use SteamFresh with items such as D wool, wool balnket, leather jackets, silk, wet clothes, lingerie, foam products, or electric blankets. or best results, load articles of similar size and F fabric type. Do not overload. hen the filter/duct is clogged, the Steam W option may not have optimal results. hen the Steam function is operating, W the drum will stop to allow steam to stay in the drum. he steam feeder must be filled with water up T to the MAX line. Otherwise, an Error message will be displayed. DRY LEVEL FABRIC STATE FABRIC TYPE MAXIMUM AMOUNT
STEAMSANITARY (39 minutes)
Comforter Bedding Childrens clothing Comforter Shirts*
Single (1 each) 3 lbs. Single (1 each) 5 each 8 lbs. (18 Items.) Shirts* (5 each)

STEAMFRESH (20 minutes)

+ REDUCE STATIC + EASY IRON + REDUCE STATIC + EASY IRON + REDUCE STATIC + EASY IRON
STEAMFRESH (10 minutes) STEAMFRESH (12 minutes) HEAVY DUTY COTTON/TOWELS NORMAL PERM.PRESS DELICATES TIME DRY (45 minutes) TIME DRY (47 minutes)
Dry Shirts* Dry Wet Wet Wet Wet Follow selected cycle Follow selected cycle Follow selected temp Follow selected temp
8 lbs. (18 Items.) Shirts* (5 each) 8 lbs. (18 Items.) Shirts* (5 each)
* Shirt: 70% cotton/30% poly blend. Except especially delicate fabrics. hen the lint filter or exhaust duct is clogged, steam options will not give proper results. W or best results, load articles of similar size and fabric type. Do not overload. F

Dryer does not heat

Greasy or dirty spots on clothes
Fabric softener used incorrectly. Clean and dirty clothes being dried together. Clean and dirty clothes being dried together.
Display shows error code tE1 or tE2 Lint on clothes
Thermistor is malfunctioning. Lint filter not cleaned properly.
Laundry not sorted properly.
Excess static in clothes. Dryer is overloaded. Tissue, paper, etc., left in pockets. Excess static in clothes after drying Fabric softener not used or used incorrectly. Clothes dried too long (overdried). Drying synthetics, permanent press, or synthetic blends.
BEFORE CALLING FOR SERVICE (cont.)
Drying time is not consistent
Heat settings, load size, or dampness of clothing is not consistent.
The drying time for a load will vary depending on the heat setting, the type of heat used (electric, natural, or LP gas), the size of the load, the type of fabrics, the wetness of the clothes, and the condition of the exhaust ducts and lint filter. Separate heavy items from lightweight items. Larger and heavier items take longer to dry. Heavy fabrics take longer to dry because they tend to retain more moisture. To help reduce and maintain more consistent drying times for large and heavy fabrics, separate these items into smaller loads of a consistent size. Use the appropriate control settings for the type of load you are drying. Make sure the lint filter is cleaned before every load. With some loads that produce high amounts of lint, it may be necessary to clean the filter during the cycle. Confirm that the exhaust ductwork is properly configured and free of debris, lint, and obstructions. Make sure that outside wall dampers can open properly and are not blocked, jammed, or damaged. Reset circuit breaker or replace fuse. Do not increase fuse capacity. If the problem is a circuit overload, have it corrected by a qualified electrician. Divide larger loads into smaller loads for drying. If you are drying a very small load, add a few extra items to ensure proper tumbling action. Overdrying a load of laundry can lead to wrinkled clothes. Try a shorter drying time, and remove items while they still retain a slight amount of moisture. Remove items from the dryer immediately at the end of the cycle. Use the WRINKLE CARE option to continue tumbling clothes at the end of the cycle, for up to 3 hours. To avoid shrinkage, please carefully follow the fabric care instructions for your garment, because some fabrics will naturally shrink when washed. Other fabrics can be washed but will shrink when dried in a dryer. Use a low or no heat setting and/or the RACK DRY option. Check steam feeder drawer: (1) Make sure steam feeder is filled with water to MAX line. (2) Make sure steam feeder is seated properly and drawer is fully closed. (3) Turn the dryer off then restart the Steam cycle. Do not use distilled water; the water level sensor in steam generator will not work. Pump not working. Unplug dryer and call for service. This is steam condensation. The dripping water will stop after a short time.

MORE TIME button pressed. STEAMFRESH did not remove odor completely. Lint filter is almost clogged or full. Ductwork is slightly too long or has too many turns/restrictions. Partial blockage of the ductwork due to lint buildup.
4 bars are displayed In the LCD screen.
Ductwork is too long or has too many turns/restrictions. Significant blockage of the ductwork due to lint buildup or debris.

Pedestal

Give your LG washer and dryer a boost with matching 14-inch high pedestals. They feature a storage drawer for added convenience. 14" Pedestal Color WDP3W WDP3R WDP3P White Wild Cherry Red Platinum

Stacking Kit

If space is at a premium, use this kit to securely stack your LG front-load washer and dryer. Stacking Kit Color WSTK1 White RSTK1 Wild Cherry Red PSTK1 Platinum

PEDESTAL INSTALLATION

The pedestal accessory includes:
Drawer divider (1) crews (18) S Wrench (1) Retainers (4) To ensure safe and secure installation, please thoroughly follow the instructions below.

wWARNING

Dryer installation only uses 8 screws For dryer only
Tools Needed for Installation:
hillips-head screwdriver P rench (supplied) W
ncorrect installation can cause serious I accidents. The appliances are heavy. Two or more people are required when installing the pedestal. There is a risk of serious back injury or other injuries. o not allow children to play in or on the D drawer. There is a risk of suffocation or injury. o not step on the handle. There is a risk of D serious injury. f appliances are already installed, I disconnect them from all power, water, or gas lines and from draining or venting connections. Failure to do so can result in electrical shock, fire, explosion, or death. When installing, gloves must be put on.

T-clip Retract fully

Retainer
1 Make sure the leveling feet of the dryer are fully retracted. NOTE: The appliance and pedestal assembly must be placed on a solid, sturdy, level floor for proper operation.
2 Insert the T-clip of the 4 retainers into the dryer base as shown. Press up on the back of the clip and pull outward to lock into place.
PEDESTAL INSTALLATION (cont.)

For dryer

For washer/combo

3 Place the dryer on the pedestal. Make sure the front and back feet are in the correct positions. The dryer feet will fit into the innermost positions as shown.
4 Make sure the screws on the pedestal align with the holes in the retainers, then install 4 screws on each side to securely attach the appliance to the pedestal. NOTE: If the screws are not installed properly, noise and vibration may result. Move the appliance to the desired location.

Locknut

5 Loosen the locknuts on all 4 leveling feet of the pedestal until you can turn them with the wrench. Turn clockwise to raise or counterclockwise to lower until the pedestal is level and all 4 feet are solidly against the floor.
6 Securely tighten all locknuts by hand. NOTE: Noise and vibration may result if locknuts are not tightened. Be sure to connect the appliances to all water, power, or gas lines and draining or venting connections before operation. If there is excessive vibration during the first operation after installation, slightly adjust the leveling feet.
STACKING KIT INSTALLATION
This stacking kit includes:
T wo (2) side rails ne (1) front rail O our (4) screws F To ensure safe and secure installation, please observe the following instructions.
hillips-head screwdriver P
Incorrect installation can cause serious accidents. The weight of the dryer and the height of installation make this stacking procedure too risky for one person. Two or more people are required when installing the stacking kit. There is a risk of serious back injury or other injuries. Do not use the stacking kit with a gas dryer in potentially unstable conditions such as a mobile home. Failure to follow this warning can result in serious injury. Place the washer on a solid, stable, level floor capable of supporting the weight of both appliances. Failure to follow this warning can result in serious injury. Do NOT stack the washer on top of the dryer. Failure to follow this warning can result in serious injury. If appliances are already installed, disconnect them from all power, water, or gas lines and from draining or venting connections. Failure to do so can result in electrical shock, fire, explosion, or death.
1 Make sure the surface of the washer is clean and dry. Remove paper backing from the tape on one of the stacking kit side brackets.
2 Fit the side bracket to the side of the washer top as shown in the above illustration. Firmly press the adhesive area of the bracket to the washer surface. Secure the side bracket to the washer with a screw on the back side of the bracket. Repeat steps 1 and 2 to attach the other side bracket.
STACKING KIT INSTALLATION (cont.)

Washer

3 Place the dryer on top of the washer by fitting the dryer feet into the side brackets as illustrated. Avoid finger injuries; do not allow fingers to be pinched between the washer and dryer. Slowly slide the dryer toward the back of the washer until the side bracket stoppers catch the dryer feet.

TRAIL APPLIANCES HOT LIST v1 01/28/11- Please contact Stores to confirm availability *LIMITED QUANTITIES*

LOWERMAINLAND WAREHOUSE

COOKTOPS AND RANGES
TYPE COOKTOP COOKTOP COOKTOP RANGES RANGES RANGES TYPE DISHWASHERS DISHWASHERS DISHWASHERS DISHWASHERS DISHWASHERS DISHWASHERS DISHWASHERS DISHWASHERS DISHWASHERS DISHWASHERS DISHWASHERS DISHWASHERS DISHWASHERS TYPE FREEZERS FREEZERS FRIDGES FRIDGES FRIDGES FRIDGES FRIDGES FRIDGES FRIDGES FRIDGES FRIDGES WINE COOLERS WINE COOLERS TYPE HOOD FANS HOOD FANS HOOD FANS MICROWAVE OVENS MICROWAVE OVENS TYPE DRYERS DRYERS DRYERS DRYERS DRYERS DRYERS DRYERS DRYERS DRYERS DRYERS DRYERS DRYERS DRYERS WASHERS WASHERS WASHERS WASHERS WASHERS WASHERS WASHERS WASHERS WASHERS WASHERS WASHERS WASHERS WASHERS WASHERS WASHERS BRAND ELECTROLUX KITCHENAID MIELE FRIGIDAIRE FRIGIDAIRE FRIGIDAIRE BRAND ASKO ASKO DANBY DANBY GAGGENAU FISHER PAYKEL FRIGIDAIRE FRIGIDAIRE WHIRLPOOL LG LG LG BOSCH BRAND DANBY FRIGIDAIRE DANBY VIKING FRIGIDAIRE FRIGIDAIRE LG LG LG FRIGIDAIRE ULINE DANBY DANBY BRAND ZEPHYR KITCHENAID VENTAHOOD FRIGIDAIRE FRIGIDAIRE BRAND FRIGIDAIRE LG LG LG LG LG LG LG LG ASKO BOSCH WHIRLPOOL WHIRLPOOL FRIGIDAIRE ASKO ASKO BOSCH WHIRLPOOL WHIRLPOOL WHIRLPOOL WHIRLPOOL LG LG LG LG LG LG LG STOCK CODE CFGI13P3KS KICU508SBL KM360LPSS CFEF358EB CFEF366EM CFEF372EC STOCK CODE D5110XXLW D5220XXLFI DDW1899BLS DDW1899WP DF241-760 DS605B FDB1100RHM GLD2250RDC GU3000XTXS LDF7932ST LDS4821BB LDS4821WW SHE55C05UC STOCK CODE DUFM320WDD PLFU1778ES DCR412B DFBB536R FGHC2334KE FRS6HR35KM LBN20511WW LBN20512ST LFC25770ST PHT189JKM UCO2175FS01 DWC286BLS DWC518BLS STOCK CODE AK7000S KWCU205HSS SLXH18-136SS CFMV152KS CFMV157GB STOCK CODE CASE7073LA DLE2301R DLE2301S DLE2301W DLE2516W DLE5955S DLEX3001P DLEX3001R DLEX7177WM T793SS WTA4400CN YWED9550WL YWED9550WW FAFS4473LA W6022W W6903SS WFL2060UC WFW8300SW WFW9450WL WFW9450WR WFW9550WR WM2133CW WM2301HR WM2301HS WM2301HW WM2487HSMA WM2688HWMA WM3455HW DESCRIPTION FRIGIDAIRE PORTABLE INDUCTION COOKTOP KITCHENAID INDUCTION COOKTOP STAINLESS & BLACK MIELE COOKTOP SS LIQUID PROPANE FRIGIDAIRE RANGE BLACK FRIGIDAIRE RANGE SILVER FRIGIDAIRE RANGE BLACK & STAINLESS WH QTY FREE AW 3 AW 16 AW 8 AW 5 AW 3 AW 3 WH QTY FREE AW 3 AW 6 AW 3 AW 2 AW 2 AW 2 AW 7 AW 2 AW 23 AW 7 AW 3 AW 28 AW 7 WH QTY FREE AW 7 AW 2 AW 21 AW 2 AW 2 AW 7 AW 19 AW 23 AW 2 AW 3 AW 2 AW 2 AW 2 WH QTY FREE AW 2 AW 2 AW 5 AW 2 AW 2 WH QTY FREE AW 7 AW 26 AW 30 AW 23 AW 15 AW 17 AW 7 AW 3 AW 3 AW 2 AW 6 AW 18 AW 6 AW 7 AW 4 AW 2 AW 7 AW 17 AW 13 AW 4 AW 2 AW 3 AW 18 AW 11 AW 16 AW 2 AW 2 AW 43 SELL PRICE $ 129.00 $ 1,499.00 $ 888.00 $ 599.00 $ 499.00 $ 749.00 SELL PRICE $ 699.00 $ 1,099.00 $ 399.00 $ 399.00 $ 1,199.00 $ 749.00 $ 319.00 $ 449.00 $ 649.00 $ 1,099.00 $ 659.00 $ 659.00 $ 1,149.00 SELL PRICE $ 479.00 $ 999.00 $ 229.00 $ 7,229.00 $ 1,699.00 $ 1,199.00 $ 749.00 $ 849.00 $ 1,999.00 $ 699.00 $ 2,899.00 $ 499.00 $ 899.00 SELL PRICE $ 799.00 $ 899.00 $ 899.00 $ 399.00 $ 399.00 SELL PRICE $ 749.00 $ 729.00 $ 729.00 $ 729.00 $ 499.00 $ 699.00 $ 1,025.00 $ 1,025.00 $ 899.00 $ 1,600.00 $ 850.00 $ 799.00 $ 799.00 $ 899.00 $ 999.00 $ 2,000.00 $ 899.00 $ 549.00 $ 599.00 $ 899.00 $ 899.00 $ 699.00 $ 799.00 $ 799.00 $ 799.00 $ 1,049.00 $ 1,299.00 $ 1,599.00 MSRP $ 149.00 $ 2,599.00 $ 1,199.00 $ 749.00 $ 799.00 $ 899.00 MSRP 1,149.00 1,499.00 549.00 549.00 1,929.00 1,019.00 449.00 649.00 799.00 1,799.00 899.00 899.00 1,399.00 MSRP 519.00 1,399.00 249.00 9,483.00 2,299.00 1,499.00 899.00 999.00 2,899.00 1,299.00 3,599.00 549.00 1,129.00

DISHWASHERS

DESCRIPTION ASKO DISHWASHER WHITE ASKO DISHWASHER XXL FULLY INTEGRATED DANBY DISHWASHER 18" STAINLESS & BLACK DANBY DISHWASHER PORTABLE BLACK GAGGENAU DISHWASHER FULLY INTEGRATED TITANIUM FISHERPAYKEL DISHDRAWER SINGLE BLACK FRIGIDAIRE DISHWASHER SILVER MIST FRIGIDAIRE DISHWASHER GALLERY STAINLSS WHIRLPOOL GOLD DISHWASHER STAINLESS LG DISHWASHER STAINLESS WITH STEAM LG DISHWASHER FRONT CONTROLS BLACK LG DISHWASHER FRONT CONTROLS WHITE BOSCH DISHWASHER STAINLESS $ $ $ $ $ $ $ $ $ $ $ $ $
REFRIGERATORS, FREEZERS, WINE COOLERS
DESCRIPTION DANBY FREEZER UPRIGHT 11.CFT CAPACITY WHITE FRIGIDIARE PROFESSIONAL UPRIGHT FREEZER STAINLESS DANBY BAR FRIDGE BLACK VIKING FRIDGE DESIGNER 36" RIGHT HAND HINGE OVERLAY FRIGIDAIRE FRIDGE SIDE BY SIDE BLACK FRIGIDAIRE FRIDGE SIDE BY SIDE BLACK LG FRIDGE WHITE BOTTOM MOUNT 20 CFT LG FRIDGE STAINLESS BOTTOM MOUNT 20 CFT LG FRIDGE FRENCH DOOR STAINLESS 25CFT FRIGIDAIRE FRIDGE TOP MOUNT SILVER MIST ULINE FRIDGE & ICE MAKER STAINLSS LEFT HAND DANBY WINE COOLER 30 BOTTLES STAINLESS & BLACK DANBY WINE COOLER STAINLESS & BLACK $ $ $ $ $ $ $ $ $ $ $ $ $
HOODFANS AND MICROWAVE OVENS
DESCRIPTION ZEPHYR HOODFAN SS WALL MOUNT KITCHENAID HOODFAN WALL MOUNT STAINLESS VENTAHOOD HOODFAN SS HALOGEN LIGHTS FRIGIDAIRE MICROWAVE STAINLESS OVER THE RANGE FRIGIDAIRE MICROWAVE BLACK OVER THE RANGE MSRP $ 1,319.00 $ 1,199.00 $ 1,399.00 $ 449.00 $ 479.00 MSRP 999.00 1,099.00 1,099.00 1,099.00 699.00 1,299.00 1,799.00 1,799.00 1,599.00 2,987.00 1,209.00 949.00 949.00 1,199.00 1,399.00 3,977.00 1,649.00 899.00 1,199.00 1,199.00 1,199.00 999.00 1,199.00 1,199.00 1,199.00 1,799.00 2,399.00 2,499.00

WASHERS AND DRYERS

DESCRIPTION FRIGIDAIRE DRYER SILVER STEAM LG DRYER RED 7.3CFT 9CYC LG DRYER TITANIUM 7.3CFT 9CYC LG DRYER WHITE 7.3CFT 9CYCLES LG DRYER WHT 7.0CFT CAPACITY LG DRYER ELECTRIC TITANIUM LG DRYER PURE SILVER 7.4CFT CAPACITY LG DRYER RED 7.4CFT CAPACITY LG DRYER STEAM WH 7.0CFT CAPACITY ASKO DRYER STAINLESS 6PROGRAMS BOSCH DRYER WHITE 24" VENTED WHIRLPOOL DRYER DUET SILVER 7.2CFT WHIRLPOOL DRYER DUET WHITE 7.2CFT FRIGIDAIRE WASHER WITH STEAM SILVER ASKO WASHER WHITE 1200 RPM ASKO WASHER STAINLESS 13PROGRAMS BOSCH WASHER WHITE 1000RPM"S WHIRLPOOL WASHER DUET SPORT WHITE WHIRLPOOL WASHER DUET SPORT SILVER WHIRLPOOL WASHER DUET SPORTRED WHIRLPOOL WASHER DUET STEAM RED LG WASHER WHITE 4CFT 7CYCLES LG WASHER RED 4.2CFT 9CYCLES LG WASHER TITANIUM 4.2CFT 9CYCLES LG WASHER WHITE 4.2CFT 9CYCLES LG WASHER SILVER STEAM FRONT LOAD LG WASHER WHITE STEAM FRONT LOAD LG WASHER/DRYER COMBO UNIT WHITE $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $

VICTORIA WAREHOUSE *ONLY*
RANGES, WALL OVENS AND MICROWAVES
TYPE RANGES RANGES WALL OVENS MICROWAVE OVENS MICROWAVE OVENS TYPE DISHWASHERS DISHWASHERS DISHWASHERS DISHWASHERS TYPE FRIDGES FRIDGES FRIDGES FRIDGES FRIDGES WINE COOLERS TYPE DRYERS DRYERS DRYERS DRYERS DRYERS DRYERS WASHERS WASHERS WASHERS BRAND FRIGIDAIRE WHIRLPOOL WHIRLPOOL PANASONIC KITCHENAID BRAND FRIGIDAIRE FRIGIDAIRE WHIRLPOOL LG BRAND WHIRLPOOL LG LG WHIRLPOOL WHIRLPOOL DANBY BRAND LG LG LG LG LG FRIGIDAIRE LG LG LG STOCK CODE CFEF355FS YWFE366LVQ RBS275PVS NNSN667B YKHMS175MSS STOCK CODE FDB1100RHS FDB700BFS GU3000XTXS LDS4821BB STOCK CODE ED5FHEXVB LBN20511WW LBN20512ST W6RXNGFWQ W6RXNGFWS DWC1534BLS STOCK CODE DLE2301S DLE2301W DLE2516W DLEX3001P DLEX3001R GLEQ442CES WM2301HS WM2301HW WM3001HRA DESCRIPTION FRIGIDAIRE RANGE WHITE ELECTRIC WHIRLPOOL RANGE ELECTRIC WHITE WHIRLPOOL OVEN STAINLESS 27" SELF CLEAN PANASONIC MICROWAVE BLACK KITCHENAID MICROWAVE OVER THE RANGE STAINLESS WH QTY FREE IW 2 IW 4 IW 2 IW 2 IW 2 WH QTY FREE IW 4 IW 4 IW 4 IW 3 WH QTY FREE IW 5 IW 5 IW 4 IW 2 IW 18 IW 2 WH QTY FREE IW 3 IW 4 IW 2 IW 2 IW 2 IW 3 IW 2 IW 4 IW 2 SELL PRICE $ 549.00 $ 799.00 $ 799.00 $ 149.00 $ 549.00 SELL PRICE $ 319.00 $ 309.00 $ 649.00 $ 659.00 SELL PRICE $ 1,199.00 $ 749.00 $ 849.00 $ 529.00 $ 599.00 $ 699.00 SELL PRICE $ 729.00 $ 729.00 $ 499.00 $ 1,025.00 $ 1,025.00 $ 399.00 $ 799.00 $ 799.00 $ 1,300.00 MSRP $ 649.00 $ 949.00 $ 1,349.00 $ 159.00 $ 999.00 MSRP 429.00 399.00 799.00 899.00
DESCRIPTION FRIGIDAIRE DISHWASHER STAINLESS FRIGIDAIRE DISHWASHER WHITE WHIRLPOOL GOLD DISHWASHER STAINLESS LG DISHWASHER FRONT CONTROLS BLACK $ $ $ $
REFRIGERATORS AND WINE COOLERS
DESCRIPTION WHIRLPOOL FRIDGE BLACK LG FRIDGE WHITE BOTTOM MOUNT 20 CFT LG FRIDGE STAINLESS BOTTOM MOUNT 20 CFT WHIRLPOOL FRIDGE WHITE WHIRLPOOL FRIDGE STAINLESS DANBY WINECOOLER 15" STAINLESS & BLACK MSRP $ 1,599.00 $ 899.00 $ 999.00 $ 729.00 $ 829.00 $ 899.00 MSRP 1,099.00 1,099.00 699.00 1,799.00 1,799.00 599.00 1,199.00 1,199.00 2,099.00
DESCRIPTION LG DRYER TITANIUM 7.3CFT 9CYC LG DRYER WHITE 7.3CFT 9CYCLES LG DRYER WHT 7.0CFT CAPACITY LG DRYER PURE SILVER 7.4CFT CAPACITY LG DRYER RED 7.4CFT CAPACITY FRIGIDAIRE DRYER WHITE GALLERY LG WASHER TITANIUM 4.2CFT 9CYCLES LG WASHER WHITE 4.2CFT 9CYCLES LG WASHER RED 4.5CFT STEAM FRONT LOAD $ $ $ $ $ $ $ $ $

KELOWNA WAREHOUSE *ONLY*

DISHWASHERS, REFRIGERATORS AND RANGES
TYPE DISHWASHERS DISHWASHERS DISHWASHERS FRIDGES RANGES BRAND DANBY WHIRLPOOL LG LG FRIGIDAIRE STOCK CODE DDW1899WP GU3000XTXS LDS4821WW LBN20512ST CGLEF379GC DESCRIPTION DANBY DISHWASHER PORTABLE BLACK WHIRLPOOL GOLD DISHWASHER STAINLESS LG DISHWASHER FRONT CONTROLS WHITE LG FRIDGE STAINLESS BOTTOM MOUNT 20 CFT FRIGIDAIRE RANGE ELECTRIC STAINLESS WH QTY FREE KW 4 KW 4 KW 2 KW 5 KW 6 SELL PRICE $ 399.00 $ 649.00 $ 659.00 $ 849.00 $ 999.00 MSRP $ 549.00 $ 799.00 $ 899.00 $ 999.00 $ 1,199.00