HT554PH-D0_BDEULL_ENG_0724

1/6/09

11:19 AM

Page 1

As an ENERGY STAR LG has determined that this product or product models meet the ENERGY STAR guidelines for energy efficiency. ENERGY STAR is a U.S. registered mark.
Model: HT554PH (HT554PH-D0, SH54PH-F/S/C/W) HT554TH (HT554TH-D0, SH54TH-F/S/C/W) HT554TM (HT554TM-D0, SH54TM-S/C/W) Partner,
Full HD up-scaling (1080p)

5.1ch ez Set-up

Listen sound from TV, DVD and Digital Device with vivid 5.1ch mode.

Go to page 15

Unique Features
View Full HD picture quality with simple setup.

Go to page 10

USB Direct Recording Portable In
Record music from CD to your USB device.

Go to page 17

Listen to music from your portable device (MP3, Notebook, etc).

P/NO : MFL60020724

Page 2

Safety Precaution

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible. Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. This product is manufactured to comply with EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC. European representative : LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere, The Netherlands (Tel : +31-036-547-8940)
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings should be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction has been adhered to. CAUTION: This product employs a Laser System. To ensure proper use of this product, please read this owners manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service center. Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit;

Put the battery into the remote control
Make sure that the + (plus) and (minus) on the battery match those on the remote control.

Controlling the TV.

You can control the sound level, input source, and power switch of LG TVs as well. Hold POWER (TV) and press PROGRAM (v/V) button repeatedly until the TV on or off.
. SKIP(. / >): Go to next or previous chapter/ track. PROG./MEMO. : Accesses or removes Program menu. VOLUME (+/-) : Adjusts speaker volume.

Page 8

Main Unit
Open/Close DVD/CD Disc Drawer PORT. IN port The PORT. In port means you can connect an audio device to play trough the surround sound speakers. USB port The USB port allows you can connect a memory device to your DVD player. Play/Pause, Function Press and hold down this button for about 3 seconds then press repeatedly to select other function. Stop Tuning (-/+) Skip / Search
Power Turn the unit on and off.
VSM Selects the Dolby Pro Logic II or Virtual sound.
Volume Control the volume when using any function.

Page 9

OSD Initial language settings - Optional
During the first use of this unit, the initial language setup menu appears on your TV screen. You must complete initial language selection before using the unit. English will be selected as the initial language.

Adjust the settings

ON REMOTE
1 Display setup menu : 2 Select a desired option on the first level: 3 Move to second level: 4 Select a desired option on the second level: 5 Move to third level: 6 Change the setting: SETUP Uu i Uu i U u, ENTER
1 Turn the power on : The language list appears 2 Select the language : 3 Press : 4 To confirm press : POWER UuIi ENTER I i and ENTER
Initial Setting the Area Code - Optional
When you use this unit for the first time, you have to set the Area Code as shown below.
Adjust the settings - more you can do
Adjust the language settings
OSD Select a language for the Setup menu and on-screen display. There is displayed as - or other error mark on display when you change OSD. - Restart the unit - Change function - Disconnect and connect USB device. Disc Menu/Audio/Subtitle Select a language for the Menu/Audio/Subtitle. [Original]: Refers to the original language in which the disc was recorded. [Others]: To select another language, press number buttons then ENTER to enter the corresponding 4-digit number according to the language code list in the reference chapter (see page 18). If you make a mistake before pressing ENTER, press CLEAR. [OFF] (for Disc Subtitle): Turn off Subtitle.

1 Display setup menu : 2 Select LOCK menu on the first level : 3 Move to second level : The activated Area Code appears on the second level. 4 Move to the third level : 5 Enter a new password : 6 Recheck the entered new password : 7 Select a code for a geographic area : After select, Rating and Password will be activated. (page 18) 8 To confirm what you press : Make sure to finish setting the Area Code before leaving the setup menu if you cannot set the rating and Password SETUP Uu
i i numerical buttons (0-9) and ENTER numerical buttons (0-9) and ENTER U u I i and ENTER

ENTER 9

Page 10
Adjust the display settings
TV Aspect Select which screen aspect to use based on the shape of your TV screen. [4:3]: Select when a standard 4:3 TV is connected. [16:9]: Select when a 16:9 wide TV is connected. Display Mode If you selected 4:3, youll need to define how you would like widescreen programs and films to be displayed on your TV screen. [Letterbox]: This displays a widescreen picture with black bands at the top and bottom of the screen. [Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary. TV Output Select Select an option according to the TV connection type. [YPbPr]: When your TV is connected with the COMPONENT/PROGRESSIVE SCAN jacks on the unit. [RGB]: When your TV is connected with the SCART jack. Video Resolution - Use U u to select the desired resolution then press ENTER to confirm your selection. You can set 1080p video resolution to enjoy Full HD picture quality. (Full HD up-scaling) The number in 480p (or 576p), 720p, 1080p and 1080i indicates the number of lines of video. The i and p indicate interlaced and progressive scan, respectively. [Auto] If your HDMI jack is connected to TVs providing display information (EDID), automatically selects the resolution best suited to the connected TV (1080p, 1080i, 720p or 480p (or 576p)). (only for HDMI connection) [1080p] Outputs 1080 lines of progressive video. (only for HDMI connection) [1080i] Outputs 1080 lines of interlaced video.(only for HDMI connection) [720p] Outputs 720 lines of progressive video.(only for HDMI connection) [480p (or 576p)] Outputs 480 (or 576) lines of progressive video. [480i (or 576i)] Outputs 480 (or 576) lines of interlaced video. Notes on Video Resolution Only resolutions supported by the TV are available. Depending on your TV, certain HDMI output resolutions may not work. If your TV does not accept your resolution setting, an abnormal picture appears on the screen. Please read TVs owners manual then set the resolution that your TV can accept. If the HDMI jack is connected for TVs providing display information (EDID), you can not select resolutions that the TV does not accept. If the picture does not appear on the screen, change the TVs input source.

Setting the sound mode

VSM (VIRTUAL SOUND MATRIX) and Dolby Pro Logic II
You can select the Dolby Pro Logic II or Virtual sound. Press VSM to set the virtual sound or to change sound mode repeatedly. [BYPASS] mode : Software with multichannel surround audio signals is played according to the way it was recorded. 2Ch source [PL II MOVIE] mode: The Movie mode is for use with stereo television shows and all programs encoded in Dolby Surround. The result is enhanced sound field directionality that approaches the quality of discrete 5.1-channel sound. [PL II MUSIC] mode: The Music mode is for use with any stereo music recordings. [PL II MATRIX] mode: The Matrix mode is the same as the Music mode except that the directional enhancement logic is turned off. It may be used to enhance mono signals by making them seem larger. The Matrix mode may also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate cure for poor FM stereo reception may be simply to force the audio to mono. [ON STAGE] mode: Simulates a large Concert hall [VIRTUAL] mode: Realtime 3D positioned sound rendering technology
Adjust the others settings
DivX(R) Registration We provide you with the DivX VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX VOD service. For more information, visit www.divx.com/vod. Press ENTER when [Select] icon is highlighted and you can view the registration code of the unit. Bit Rate You can set the quality of the recorded file.
with stereo sources, optimized for stereo speakers. Listeners may experience amazing virtual surround effects with their own multimedia players.
5.1Ch source [VIRTUAL] mode: The Multichannel sound changes the sound in 5.1 ch
into a virtual one in the 10.1 ch so that it provides such a feeling that you listen to the sound simultaneously from the right and left speakers and center speaker. Set a pre-programmed sound field

This system has a number of pre-set surround sound fields. Select the one which best suits the programme you are watching by pressing EQ repeatedly to cycle through the options: NORMAL, NATURAL, AUTO EQ, POP, CLASSIC, ROCK, JAZZ [AUTO EQ]: AUTO EQ operates only in the MP3/ WMA files which include the information. (ID3 Tag is operated ver.1 only.) WMA file operates to Normal EQ regardless of Tag information.

Page 12

Displaying Disc Information
1 Press DISPLAY: 2 Select a item: 3 Adjust the Display menu settings: 4 To return the exit: DISPLAY Uu Ii DISPLAY

Playing a Disc or file

1 Open the disc tray: (On unit: Z) 2 Insert a Disc: (On unit) 3 Close the disc tray: (On unit: Z) 4 Adjust the menu settings: or Select a file from the menu: 5 Start the Disc playing: 6 To stop the Disc playing: UuIi Uu
Displaying Disc Information - more you can do
You can select an item by pressing U u and change or select the setting by pressing I i.

PLAY STOP

1 ENG D
Current title (or track) number/total number of titles (or tracks) Current chapter number/total number of chapters Elapsed playing time Selected audio language or channel Selected subtitle Selected angle/total number of angles Selected sound mode
Playing a Disc or file - more you can do
Playing a DVD that has a menu

3/2.1CH

Most DVD now have menus which load first before the film begins to play. You can navigate these menus using U u I i to highlight an option. Press ENTER to select.
Skip to the next/previous chapter/track
Symbol Used in this Manual
All discs and file listed below DVD and finalized DVDR/RW DivX files

ALL DVD DivX

Press SKIP (>) to move to the next chapter/track. Press SKIP (.) to return to the beginning of the current chapter/track. Press SKIP (.) twice briefly to step back to the previous chapter/track.

Pause playback

MP3 WMA ACD
MP3 files WMA files Audio CDs
Press PAUSE/STEP (X) to pause playback. Press PLAY (B) to continue playback.

Frame-by-Frame playback

Press PAUSE/STEP (X) repeatedly to play title Frame-by-Frame.

Playing repeatedly

Press REPEAT repeatedly to select an item to be repeated. The current title, chapter or track will be played back repeatedly. To return to normal playback, press REPEAT repeatedly to select [OFF].

Page 13

Fast forward or fast reverse
Mixed disc or USB Flash Drive DivX, MP3/WMA and JPEG
When playing a disc or USB Flash Drive containing with DivX, MP3/WMA and JPEG files together, you can select which menu of files you would like to play by pressing TITLE

This unit memorizes the last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the player or switch off(Stand-by mode) the unit. If you load a disc that has the scene memorized, the scene is automatically recalled.

Page 14

Creating your own program ACD
You can play the contents of a disc in the order you want by arranging the order of the music files on the disc. The program is cleared when the disc is removed. Select a desired music file then press PROG./MEMO. or select and then press ENTER to add the music file to the program list. To add all music files on the disc, select and then press ENTER. Select a music file from the program list then press ENTER to start programmed playback.To clear a music file from the program list, select the music file you want to clear then press CLEAR or select icon and then press ENTER. To clear all music files from the program list, select " " then press ENTER.

Viewing photo files

1 Open the disc tray: (On unit: Z) 2 Insert a disc: (On unit) 3 Close the disc tray: (On unit: Z) 4 Select a photo file: 5 Display the selected file in full screen: 6 To return to the menu: Uu ENTER x STOP -
Displaying file information (ID3 TAG ) MP3
While playing an MP3 file containing file information, you can display the information by pressing DISPLAY repeatedly.
Viewing photo files - more you can do
Viewing photo files as a slide show
Use U u I i to highlight ( ) icon then press ENTER to start slide show. You can change slide show speed using I i when ( ) icon is highlighted.
MP3/WMA music file requirement
MP3/WMA compatibility with this unit is limited as follows:
File extensions:.mp3,.wma. Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48kHz (WMA) Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA) CD-R/RW, DVDR/RW Format: ISO 9660 Maximum Files/Disc: Less than 999 (total number of files and folders)
Skip to the next/previous photo

Press SKIP (. or >) to view the previous/next photo.

Rotate a photo

Use U u I i to rotate the photo in full screen mode.

Screen Saver

The screen saver appears when you leave the unit in Stop mode for about five minutes.

Pause a slide show

Press PAUSE/STEP (X) to pause a slide show. Press PLAY (B) to continue the slide show.

System Select

You must select the appropriate system mode for your TV system. If NO DISC appears in the display window, press and hold PAUSE/STEP (X) for more than five seconds to be able to select a system.

Photo file requirement

JPEG file compatibility with this unit is limited as follows:
File extensions:.jpg Photo size: Less than 2MB recommended CD-R/RW, DVDR/RW Format: ISO 9660 Maximum Files/Disc: Less than 999 (total number of files and folders)

Page 15

Listening to the radio
Be sure that FM aerial is connected.
See information about a radio station
The FM tuner is supplied with the RDS (Radio Data System) facility. This shows information about the radio station being listened to. Press RDS repeatedly to cycle through the various data types: PS PTY RT (Programme Service Name) The name of the channel will appear in the display (Programme Type Recognition) The programme type (e.g. Jazz or News) will appear in the display. (Radio Text) A text message contains special information from the broadcast station. This text may scroll across the display. (Time controlled by the channel) This shows the time and date as broadcast by the station.
1 Turn the power on: 2 Select FM: 3 Select a radio station: 4 To save a radio station: A preset number will show in the display. 5 To select a saved station input the preset number: Up to 50 radio stations can be saved. 6 To confirm press: POWER FUNCTION TUN-/+ PROG/MEMO.

PRESET-/+ PROG/MEMO.

Listen to sound from TV, DVD and Digital Device with vivid 5.1ch mode. Even in power off mode, if you press HT SPK, then power is on and automatically changed to AUX OPT mode.
Listening to the radio - more you can do
Look for radio stations automatically
Press and hold TUN.-/TUN.+ for more than a second. The tuner will scan automatically and stop when it finds a radio station.

Choose a preset number for a radio station
When storing a radio station, the preset number can be chosen. When the player automatically shows a preset number, press PRESET -/+ to change it. Press PROG./MEMO. to save your chosen number.
Delete all the saved stations
Press and hold PROG./MEMO. for two seconds. ERASE ALL will flash up on the DVD receiver display. Press PROG./MEMO. to erase all saved radio stations.
1 Connect the units OPTICAL IN jack to jack on optical out of your TV (or Digital Device etc.).: 2 Select the AUX OPT:
To select the AUX OPT directly
Improve poor FM reception
Press PLAY (B) (MONO/ST). This will change the tuner from stereo to mono and usually improve the reception.

HT SPK FUNCTION or INPUT

3 Listen sound with 5.1ch speaker.: 4 To escape from AUX OPT:

Page 16

Listening to music from your USB device
The advantage of connecting your portable USB player through the systems USB port is that the USB device can be controlled from the system.
Listening to music from your USB device more you can do

Compatible USB Devices

Devices which require additional program installation when you have connected it to a computer, are not supported. MP3 Player : Flash type MP3 player. The MP3 player requiring installation of a driver is not supported. USB Flash Drive : Devices that support USB2.0 or USB1.1. (In case USB 2.0 is inserted in the the player, if operates at the same speed as that of USB 1.1)

USB device requirement

Do not extract the USB device while in operation. To prevent data loss, back up all data. If you use a USB extension cable or USB hub, the USB device might not be recognized. A device using NTFS file system is not supported. (Only FAT (16/32) file system is supported.) The USB function of this unit does not support all USB devices. Digital camera and mobile phone are not supported. This unit is not supported when the total number of files is 1000 or more. If the connected USB device has two or more folders, a drive folder is displayed on the screen. If you want to move to the previous menu after you select a folder, press RETURN.
1 Connect the USB device to the unit using a USB cable (not supplied).: 2 Select the USB function: 3 Select a file from the menu: 4 Start your music playing: 5 Before disconnecting the portable USB device, change to any other function by pressing: 6 Remove the USB device: INPUT Uu

B PLAY

FUNCTION or INPUT -

Page 17

Recording music from CD to your USB device

1 Connect the USB device to the unit: 2 Select a mode (DVD/CD) in which you want to record: 3 Start the recording: If you want to record desired music file in Disc to USB. Select a file after start the recording: 4 To stop a recording: FUNCTION z REC
If the USB can not record appears NO USB.ERROR,USB FULL, NO REC on the display window. File will be stored to CD_REC folder in a format TRK-001.mp3. If you record more 999 files on CD_REC folder appears ERROR on the display. New files are numbered in numeric sequence. if the total number of the files are more than 999, delete some or store some in PC. External HDD,Card reader, Locked device and MP3 player is not supported.

U u and z REC x STOP

The making of unauthorized copies of copy-protected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offense. This equipment should not be used for such purposes. Be responsible Respect copyrights
Recording music from CD to your USB device - more you can do
Record Audio CD source to USB
One track recording - If the USB recording is played during playback of the CD, the one track would be recording into the USB All track recording - If the REC button is pressed at the CD stop, all track would be recording. Program list recording - USB Records after selecting the tracks pressing the PROG./MEMO button if you want to record the track you want.
Listening to music from your portable player
The player can be used to play the music from many types of portable player
When you are recording, look out for the following
When you start the USB direct recording, you can check the Recording percentage rate for the USB record on the display window during the recording. During the recording is no sound and not operate for volume. When you stop recording during playback, the file that has been recorded at that time will be stored If you disconnect the USB without STOP button while recording, the file can not delete in the PC. Playable USB REC. Bit rate : 96/128kbps (Refer to the SET UP page) During USB record can not operate Pause key for Audio CD only. Card reader device can not be use for USB record. USB port of the unit can not be connected to PC. The unit can not be used as a storage device.

Page 19

Troubleshooting

PROBLEM

No power No picture
The power cord is disconnected. The TV is not set to receive the DVD signal. The video cables are not connected securely.

CORRECTION

Plug the power cord into the wall outlet securely. Select the appropriate video input mode on the TV so the picture from the DVD Receiver appears on the TV screen. Connect the video cables securely to both the TV and DVD Receiver. Select the correct input mode of the audio receiver so you can hear the sound from the DVD receiver. Connect the audio cables into the connection terminals correctly. Replace with a new audio cable. Clean the disc using a soft cloth with outward strokes. Insert a disc Insert a playable disc (check the disc type, colour system and regional code). Place the disc with the label or printed side facing upwards. Press SETUP to close the menu screen. Enter your password or change the rating level. Clean the disc using a soft cloth with outward strokes. Move DVD receiver and audio components further away from your TV. Check the antenna connection and adjust its position. Attach an external aerial if necessary. Tune to the station manually. Preset some radio stations, see page 15 for details. Point the remote directly at the unit. Use the remote within 23 feet (7m) of the DVD receiver. Remove the obstacle. Replace the batteries with new ones.
There is little or no sound
The DVD picture quality is poor A DVD/CD will not play
Equipment connected via the audio cable is not set to receive DVD signal output. The audio cables are not connected to the speakers or receiver securely. The audio cables are damaged. The disc is dirty. No disc is inserted. An unplayable disc is inserted. The disc is inserted upside down. The menu is open on screen. There is a parental lock which prevents the playback of DVDs with a certain rating. The disc is dirty. The DVD receiver is located too close to the TV, causing feedback. The antenna is positioned or connected poorly. The signal strength of the radio station is too weak. No stations have been preset or preset stations have been.cleared(when tuning by scanning preset channels). The remote is not pointed directly at the DVD receiver. The remote is too far from the DVD receiver. There is an obstacle in the path between the remote control and the unit. The batteries in the remote control are flat.

Humming noise heard while a DVD or CD is playing Radio stations cant be tuned in properly
The remote control doesnt work well / at all

Page 20

Types of Playable Discs
DVD-VIDEO: Discs such as movies that can be purchased or rented. DVD-R: Video mode and finalized only DVD-RW: Video mode and finalized only DVD VR format that have been finalized can not be played in this unit DVD+R: Video mode only Supports the double layer disc also DVD+RW: Video mode only Audio CD:

About the

Symbol Display
may appear on your TV display during operation and indicates that the function explained in this owners manual is not available on that specific DVD video disc.

Regional Codes

This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labeled same as the rear of the unit or ALL. Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must match your units regional code or the disc cannot play. If you try to play a DVD with a different regional code from your player, the message Check Regional Code appears on the TV screen.

Copyrights

It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE STANDARD DEFINITION OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p UNIT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER. You have to set the disc format option to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live File System, you cannot use it on LG players. (Mastered/Live File System : Disc format system for Windows Vista)
This unit plays DVDR/RW and CD-R/RW that contains audio titles, DivX, MP3,WMA and/or JPEG files. Some DVDRW/DVDR or CDRW/CD-R cannot be played on this unit due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software.

Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.

Page 21

Specifications
General Power supply Power consumption Net Weight External dimensions (W x H x D) Operating conditions Temperature Operating humidity Laser Tuner FM FM Tuning Range FM Intermediate Frequency 87.5 - 108.0 MHz or 65.0 - 74.0 MHz, 87.5 - 108.0 MHz 10.7 MHz 200 - 240V, 50/ 60 Hz 80W 3.7 kg 430 x 73 x 305 mm 5C to 35C, Operation status: Horizontal 5% to 85% Semiconductor laser, wavelength 650 nm
Speakers (HT554PH) Front Speaker Type Impedance Rated Input Power Max. Input Power Net Dimensions (W x H x D) Net Weight 2 Way 3 Speaker W 140 W 275 x 1050 x 275 mm 3.4 kg Center Speaker Type Impedance Rated Input Power Max. Input Power Net Dimensions (W x H x D) Net Weight Speakers (HT554TM) Front/Rear Speaker Type Impedance Rated Input Power Max. Input Power Net Dimensions (W x H x D) Net Weight 2 Way 1 Speaker W 140 W 185 x 580 x 170 mm 1.25 kg Center speaker 2 Way 3 Speaker 4 70W 140 W 350 x 105 x 93 mm 1.08 kg Passive Subwoofer 1Way1Speaker W 300 W 216 x 405 x 310 mm 5.42 kg 2 Way 3 Speaker W 140 W 350 x 105 x 93 mm 1.08 kg Rear speaker 2 Way 3 Speaker W 140 W 101 x 207 x 109 mm 0.44 kg Passive Subwoofer 1Way1Speaker W 300 W 216 x 405 x 310 mm 5.42 kg
Amplifier Stereo mode Surround mode Front: 70 W + 70 W (4 at 1 kHz, THD 10 %) 70 W + 70 W (THD 10 %) Center*: 70 W Surround*: 70 W + 70 W (4 at 1 kHz, THD 10 %) Subwoofer*: 150 W (3 at 30 Hz, THD 10 %) Front/Rear Speaker Type Impedance Rated Input Power Max. Input Power Net Dimensions (W x H x D) Net Weight 2 Way 3 Speaker W 140 W 275 x 1050 x 275 mm 3.4 kg Center speaker 2 Way 3 Speaker 4 70W 140 W 350 x 105 x 93 mm 1.08 kg Passive Subwoofer 1Way1Speaker W 300 W 216 x 405 x 310 mm 5.42 kg

Speakers (HT554TH)

Designs and specifications are subject to change without prior notice. 21

Page 22