Software history

The latest software solves the issues below: NOTE: Each release contains all solutions identified in the earlier version. TCM31A 0.63
The TV switches off by itself. Intermittent vertical lines are seen on-screen with high pitch noise before the TV switches off. HDMI compatibility issue with LG Home Theater system, model HT762PZ. TCM31A 0.62
The position and display size of the volume and mute icons has been changed to classic format (small display size). The favourite list has been changed from 4 lists to 1 list of favourite channels. Buzzing sound is heard when you change between no signal channels. TCM31A 0.58
Manual search feature does not perform the automatic channel search with the OK key. Intermittent sound loss after channel change or when you change from VGA source to HDMI source. TCM31A 0.51E
Initial production release.

Reference

Language Codes.25 Area Codes.25 Troubleshooting.26-27 Specifications.28

Before use

To ensure proper use of this product, please read this owners manual carefully and retain it for future reference. This manual provides information on the operation and maintenance of your DVD/CD Receiver. Should the unit require service, contact an authorized service location.

Types of Playable Discs

Video CD (VCD) (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit can play a DVDR, DVDRW, SVCD and CD-R or CD-RW that contains audio titles, MP3, WMA, JPEG or DivX files. Notes: Depending on the conditions of the recording equipment or the CD-R/RW (or DVD-RW, DVD+RW) disc itself, some CD-R/RW (or DVD-RW, DVD+RW) discs may not be played on the unit. Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. Do not use irregularly shaped CDs (e.g., heartshaped or octagonal). It may result in malfunctions.

About the

Symbol Display
may appear on your TV display during operation and indicates that the function explained in this owners manual is not available on that specific DVD video disc.
Symbol Used in this Manual
Note: Indicates special notes and operating features. Tip: Indicates tips and hints for making the task easier. A section whose title has one of the following symbols is applicable only to the disc represented by the symbol.
DVD VCD ACD MP3 WMA JPEG DivX

Regional Code

This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labelled as the same as the rear of the unit or ALL. Notes on Regional Codes Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must match your DVD players regional code or the disc cannot play. If you try to play a DVD with a different regional code from your player, the message Check Regional Code appears on the TV screen.
DVD Video CDs Audio CDs MP3 files WMA files JPEG files DivX files
Remote Control Operation Range
Point the remote control at the remote sensor and press the buttons. Distance: About 23 ft (7 m) from the front of the remote sensor Angle: About 30 in each direction in front of the remote sensor
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved. Manufactured under license from Digital Theater Systems, Inc. U.S. Pat. Nos. 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535 and other U.S. and worldwide patents issued and pending. "DTS" and "DTS Digital Surround are registered trademarks of Digital Theater Systems, Inc. Copyright 1996, 2003 Digital Theater Systems, Inc. All Rights Reserved.

Remote control battery installation
Remove the battery cover on the rear of the remote control, and insert two R06 (size AA) batteries with and aligned correctly.

DVD (8 cm / 12 cm disc)

Front Panel/Rear Panel
POWER DISC Tray OPEN/CLOSE button DISPLAY Window VOLUME controller

AUDIO IN connector

TUNING(-/+)/SKIP/.> SEARCH(./>) STOP (x) PAUSE (X)/ MONO/STEREO (ST.) FUNC.(-)/PLAY(B)
Press and hold down this button about 3 seconds, then press repeatedly to select other function.
USB port Connect to a USB port of a memory device (USB memory etc.) Remote sensor Power Cord SPEAKER connectors
FM Antenna connector Cooling fan AUX AUDIO Input (L/R) connector

MONITOR

L - AUX - R

HDMI OUT

PB PR COMPONENT VIDEO (PROGRESSIVE SCAN) OUT PUT
OPTICAL IN connector AM Loop Antenna connectors MONITOR OUT connector COMPONENT VIDEO OUT terminals Connect to a TV with Y PB PR inputs. HDMI OUT HDMI output providing a high quality interface for digital audio and video.
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. Wireless transmitter receiver kit not supplied. We urge you to purchase such a kit to avoid cumbersome wires running front to back on the floor.

Remote Control

POWER TUNER
Selects the Systems tuner (FM, AM bands).
TUNER AUX USB OPEN/CLOSE DVD PROG./MEMO.
Z OPEN/CLOSE (Z) Opens and closes the disc tray. DVD

Selects input source.

PROG./MEMO.
Accesses or removes Program menu. Enter a radio stations frequency into the tuner.
Plays the multimedia files.

AUDIO REPEAT

DIMMER
SOUND REPEAT A-B S-TITLE MARKER CLEAR SEARCH

S-TITLE

Selects a subtitle language (DVD).
Changes brightness of the display window on the front panel during in power-on status.
Removes a track number on the program menu or a mark on the MARKER SEARCH menu.

SCAN STOP

+ PLAY

SCAN +

Selects an audio language (DVD) or an audio channel (CD).

TITLE PAUSE/STEP

MARKER
Marks a point during playback.

Selects the sound mode.

DISPLAY RETURN

SEARCH

Displays MARKER SEARCH menu.

REPEAT

Repeats chapter, track, title, all.

SCAN/SLOW(bb/BB)

REPEAT A-B

Repeats sequence.

Searches backward or forward. Reverse/Forward slow playback.

.> SKIP (./>)

Moves to the previous or next chapter or track.
Accesses the menu on a DVD disc.

Enlargres video image.

Accesses or removes setup menu.
Displays the discs Title menu, if available.
x STOP (x), PLAY (B) X PAUSE/STEP (X) VSM XTS pro
Supplies more natural and realistic sound. Supplies great sound effect.

DISPLAY

Accesses On-Screen display.

RETURN

Removes the menu.
b/B/v/V (left/right/up/down)
Selects an option in the menu.
Acknowledges the menu selection.

RESOL.

Sets the System to turn off automatically at a specified time.

PRESET (-/+)

Selects programme of Radio.
POWER CHANNEL INPUT VOLUME

TUN. (-/+)

Tunes in the desired radio station.
Turns the sound on and off temporarily.

0-9 numerical buttons

Selects a service, program number directly or selects numbered options in a menu.

VOLUME (-/+)

Adjusts speaker volume.
Changes the resolution depending on your TV.
Switches the HDMI mode to HDMI (active) and OFF (inactive).

TV Control Buttons

- POWER: Switches TV ON and OFF. - CHANNEL v/V: Selects TVs channel. - VOLUME +/: Adjusts TVs volume. - INPUT: Selects the TVs source.
Selects the output source (CD/DVD).

TV Connection

Make one of the following connections, depending on the capabilities of your existing equipment. Tips: Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD Receiver. Use one of the connections described below. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections. Caution: Make sure the DVD/CD Receiver is connected directly to the TV. Select the correct AV input on your TV. Do not connect your DVD/CD Receiver to the TV via your VCR. The DVD image could be distorted by the copy protection system. Rear of DVD/CD Receiver

Video connection

Connect the MONITOR OUT jack from the DVD/CD Receiver to the VIDEO IN jack on the TV using the video cable (V).

Component Video connection
Connect the COMPONENT VIDEO OUT jacks from the DVD/CD Receiver to the corresponding jacks on the TV using a Y PB PR cable (C). If your television is a high-definition or digital ready television, you may take advantage of the DVD/CD Receivers progressive scan output for the highest video resolution. If your TV does not accept your resolution setting, abnormal picture appears on the screen. Please read owners manual for TV then set the resolution that your TV can accept. Note: The HDMI mode must be set to OFF for VIDEO OUT and Component video connections.

VIDEO INPUT

COMPONENT VIDEO / PROGRESSIVE SCAN INPUT

Rear of TV

Optional Equipment Connection
OPTICAL IN connection (O)
DVD Player (or Digital Device, etc) Auxiliary device

OUT IN VIDEO

Connect an optical output of DVD Player (or Digital Device etc) to the OPTICAL IN connector.

AUDIO (L)

AUDIO IN connection (D)
Connect a output of portable device (MP3 or PMP etc) to the AUDIO input connector.
USB Memory, MP3 Player (or Memory Card Reader, etc.)

AUDIO (R)

OPTICAL OUT

To AUDIO OUT (L/R)

To AV IN AUDIO (L/R)

Rear of DVD/CD Receiver

To AUDIO IN
D Connect the USB port of USB Memory (or MP3 player, etc.) to the USB port on the front of the unit. Removing the USB Device from the unit 1. Choose a different function mode or press STOP (x) twice in a row. 2. Remove the USB device from the unit. Notes: Dont extract the USB device while operating. Music files (MP3/WMA), image files (JPEG) and video files can be played. This unit cannot use a USB HUB. Recommended Memory Cards. Compact Flash Card (CFC), Micro Drive (MD), Smart Media Card (SMC), Memory Stick (MS), Secure Digital Card (SD), Multimedia Card (MMC), Memory Stick Pro (MS-Pro) - Compatible with: FAT16, FAT32 - Only use the memory cards recommended. Devices which require additional program installation when you have connected the unit to a computer are not supported. In case of a USB HDD, make sure to connect an auxiliary power cord to the USB HDD for proper operation. Up to four primary partitions of a drive are supported. If there is an extension partition, it will not be supported. If the drive of USB device is two or more, a drive folder is displayed on the screen. If you want to move to the initial menu after you select a folder, press RETURN. Digital cameras and mobile phones are not supported.

Portable device

To AUDIO OUT

Antenna Connection

Connect the supplied FM/AM antenna for listening to the radio. Connect the AM Loop antenna to the AM antenna connector. Connect the FM Wire antenna to the FM antenna connector. Notes:
To prevent noise pickup, keep the AM Loop antenna away from the DVD/CD Receiver and other components. Be sure to fully extend the FM wire antenna. After connecting the FM Wire antenna, keep it as horizontal as possible.
AM Loop Antenna (supplied) FM Wire Antenna (supplied)

AUX IN connection (A)

Connect a Output of auxiliary device to the AUX AUDIO Input (L/R) Connector.

USB connection (U)

Assembling the speaker stand to the speaker
Before connecting the speakers, assemble the speaker stand to the speaker as illustrated. 1 Post Base Hole 1. Fix the post to the base by rotating the post. And Draw the speaker cord through the hole on the base.
Speaker System Connection
Connect the speakers using the supplied speaker wires. To obtain the best possible surround sound, adjust the speaker parameters (volume, distance, etc.).
Front speaker (Right) Front speaker (Left)
2 2. Draw the speaker cord through the hole on the speaker.

Center speaker

Rear speaker (Right surround)
Rear speaker (Left surround)
3. Fix the speaker to the stand by rotating the speaker. Connect the speaker cord to the appropriate terminals on the speaker.

Subwoofer

Notes: Be sure to match the speaker wire to the appropriate terminal on the components: + to + and to. If the cables are reversed, the sound will be distorted and will lack bass. Notes: Do not catch the speaker cord between the speaker and the post. Do not drop the speaker when mounting. If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers.

HDMI Connection

About HDMI HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for an easy all- digital output to an HDMI or DVI-equipped TV. Connection to an HDMI TV requires an HDMI cable while connection to a DVI-equipped TV requires a DVI adapter besides a HDMI cable. HDMI has the capability to support standard, enhanced, or high-definition video plus standard to multi-channel surround-sound audio, HDMI features include uncompressed digital video, a bandwidth of up to 5 gigabytes per second, one connector (instead of several cables and connector), and communication between the AV source and AV devices such as DTVs. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC. If you have a HDMI TV or monitor, you can connect it to this DVD/CD Receiver using a HDMI cable. 1. Connect the HDMI OUT jack on the DVD/CD Receiver to the HDMI jack on a HDMI compatible TV or monitor (H). 2. Set the TVs source to HDMI (refer to owners manual for TV). 3. In the stop mode, select HDMI mode by pressing HDMI. Press RESOL. repeatedly to select the resolution you wish to change. Notes: The arrow on the cable connector body should face up for correct alignment with the connector on the DVD/CD Receiver. If HDMI cable is not connected, the HDMI button does not operate. If there is noise or there are lines on the screen, please check the HDMI cable. Not all HDCP-compatible DVI devices will work with this DVD/CD Receiver. If TV does not support HDCP, snow noise appears on the screen, or picture may be vibrated. Tip : When you use HDMI connection, you can change the resolution (480p, 720p, 1080i, 1080p) for the HDMI output by pressing RESOL. on the Remote Control.

PB PR COMPONENT VIDEO (PROGRESSIVE SCAN)

H (Not supplied)

HDMI compatible TV

Resolution setting

You can change the resolution for the COMPONENT VIDEO OUT by pressing RESOL. on the Remote Control. Available resolution settings are as shown below. OUTPUT CONNECTION HDMI VIDEO OUT Available Resolution 1920 x 1080p 1920 x 1080i 1280 x 720p 720 x 480p 1920 x 1080i 1280 x 720p 720 x 480p 720 x 480i 720 x 480i
COMPONENT VIDEO OUT MONITOR OUT
Notes: If the picture does not appear on the screen with the analog video connections, change the resolution to 480i. For 720p and 1080i resolution on the component video out, only non-copy protected discs can be played back. If the disc is copy protected, it will be displayed at the 480p resolution. 1080i, 1080p, 720p, and 480p does not work with the analog video connections (MONITOR OUT). The component (Y/PB/PR) will output to black picture in the RGB mode. If you change the resolution, the display MENU (MP3/JPEG/DivX) size is changed. If your TV does not accept your resolution setting, abnormal picture appears on the screen. Please read owners manual for TV, and then set the resolution that your TV can accept. Caution: Changing the resolution when the DVD/CD Receiver is connected with HDMI connector may result in malfunctions. To solve the problem, turn off the DVD/CD Receiver and then turn it on again.
Displaying Disc Information On - screen
You can display various information about the disc loaded on-screen. 1. Press DISPLAY to show various playback information. The displayed items differ depending on the disc type or playing status. 2. You can select an item by pressing v / V and change or select the setting by pressing b / B. Title (Track) Current title (or track) number/ total number of titles (or tracks). Chapter Current chapter number/total number of chapters. Time Elapsed playing time. Audio Selected audio language or channel. Subtitle Selected subtitle. Angle Selected angle/total number of angles. Sound Selected sound mode. Note: If any button is not pressed for a few seconds, the onscreen display disappears.

LANGUAGE

OSD Disc Audio Disc Subtitle Disc Menu English Original Off Original

Select

OSD Select a language for the Setup menu and then onscreen display. Disc Audio / Subtitle / Menu Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. Original Refers to the original language in which the disc was recorded. Other To select another language, press numeric buttons and then ENTER to enter the corresponding 4-digit number according to language code list on the page 25. If you enter the wrong language code, press CLEAR.

Initial Settings

By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see the pages 12 to 14. To display and exit the Menu: Press SETUP to display the menu. A second press of SETUP will take you back to the initial screen. To go to the next level: Press B on the remote control. To go back to the previous level: Press b on the remote control.
TV Aspect Display Mode 16 : 9 Widescreen
TV Aspect 4:3 Select when a standard 4:3 TV is connected. 16:9 Select when a 16:9 wide TV is connected. Display Mode The display Mode setting works only when the TV Aspect mode is set to 4:3. Letterbox Displays a wide picture with bands on the upper and lower portions of the screen. Panscan Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit.

GENERAL OPERATION

1. Press SETUP. The Setup menu appears. 2. Use v / V to select the desired option then press B to move to the second level. The screen shows the current setting for the selected item, as well as alternate setting(s). 3. Use v / V to select the second desired option and then press B to move to the third level. 4. Use v / V to select the desired setting then press ENTER to confirm your selection. Some items require additional steps. 5. Press SETUP or PLAY to exit the Setup menu.
Each DVD disc has a variety of audio output options. Set the receivers AUDIO options according to the type of audio system you use.

5.1 Speaker Setup DRC Vocal HD AV Sync Select On On 0 ms

5.1 Speaker Setup

Make the following settings for the built-in 5.1 channel surround decoder. 1. Press ENTER, and the 5.1 Speaker Setup menu appears.
Speaker Size Volume Distance Test

Move Select

Front L Small Off dB m

Return

Dynamic Range Control (DRC) With the DVD* format, you can hear a programs soundtrack in the most accurate and realistic presentation, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing clarity of sound. Set DRC to On for this effect. *1: Dolby Digital only
2. Use b / B to select the desired speaker.
4. Press ENTER to confirm your selection. Returns to the previous menu. Speaker selection Select a speaker that you want to adjust. [Front speaker (Front L), Front speaker (Front R), Center Speaker (Center), Subwoofer (SubWoofer), Rear speaker (Rear L), Rear speaker (Rear R)] Note: Certain speaker settings are prohibited by the Dolby Digital licensing agreement.
Set Vocal to On only when a multi-channel karaoke DVD is playing. The karaoke channels on the disc will mix into normal stereo sound.
Since the speaker settings are fixed, you cannot change the settings. Volume Press b / B to adjust the output level of the selected speaker. (-5dB ~ 5dB) Distance Since the speaker settings are fixed, you cannot change the settings. Test Press b / B to test the signals of each speaker. Adjust the volume to match the volume of test signals memorized in the system. Front Left (Front L) Center Front Right (Front R) Rear Right (Rear R) Rear Left (Rear L) SubWoofer

HD AV Sync

When using Digital TV. Sometimes AV signal can not be transmitted simultaneously because of later transmission of video signal compared to audio signal. Because it takes some time to convert analog video signal to digital one in the Digital TV. And It means that you may not enjoy picture on the screen and sound from speaker at the same time even though it is one scene. In the HD AV Sync menu, you can adjust delay time to audio signal for simultaneous AV signal transmission Delay time could be set up with 10msec unit. (0 ~ 300ms) Delay time is different according to each TV Brand. So you need to adjust optimal delay time complying with your TV.

3. Adjust options using v / V / b / B buttons.

LOCK (Parental Control)

Rating Password Area Code Unlock

OTHERS

PBC DivX(R) Registration Semi Karaoke On Select On
Rating Blocks playback of rated DVDs based on their contents. Not all discs are rated. 1. Select Rating on the LOCK menu then press B. 2. To access the LOCK options, you must input the password you have created. If you have not yet entered a password, you are prompted to do so. Input a password and press ENTER. Enter it again and press ENTER to verify. If you make a mistake before pressing ENTER, press CLEAR. 3. Select a rating from 1 to 8 using the v / V buttons. Rating 1-8: Rating one (1) has the most restrictions and rating eight (8) is the least restrictive. Unlock: If you select unlock, parental control is not active and the disc plays in full. 4. Press ENTER to confirm your rating selection, then press SETUP to exit the menu. Password You can enter or change password. 1. Select Password on the LOCK menu and then press B. 2. Follow step 2 as shown above (Rating). To change the password, press ENTER when the Change option is highlighted. Input a password and press ENTER. Enter it again and press ENTER to verify. 3. Press SETUP to exit the menu. If you forget your password If you forget your password, you can clear it using the following steps: 1. Press SETUP to display the Setup menu. 2. Input the 6-digit number 210499 and press ENTER. The password is cleared. Area Code Enter the code of the area whose standards were used to rate the DVD video disc, based on the list on page 25. 1. Select Area Code on the LOCK menu then press B. 2. Follow step 2 as shown in the rating section. 3. Select the first character using v / V buttons. 4. Press B and select the second character using v / V buttons. 5. Press ENTER to confirm your Area code selection.
PBC Set Playback Control (PBC) to On or Off. On: Video CDs with PBC are played according to the PBC. Off: Video CDs with PBC are played in the same way as Audio CDs. DivX(R) Registration We provide you the DivX VOD (Video On Demand) registration code that allows you to rent and purchase videos based on the DivX VOD service. For more information, visit www.divx.com/vod. 1. Select DivX(R) Registration option and then press B. 2. Press ENTER while Select is selected and the registration code will appear. Use the registration code to purchase or rent the videos from DivX VOD service at www.divx.com/vod. Follow the instructions and download the video onto a disc for playback on this unit. 3. Press ENTER to exit. Note: All the downloaded videos from DivX VOD can only be played back on this unit.

General features

Buttons
Z (OPEN / CLOSE) X (PAUSE) SKIP (. / >)

Operations

Opens or closes the disc tray. During playback, press X to pause playback. Press X repeatedly to play Frame-by-Frame. During playback, press SKIP (. or >) to go to the next chapter/track or to return to the beginning of the current chapter/track. Press SKIP. twice briefly to step back to the previous chapter/track.

ALL ALL DVD ALL VCD DivX

SCAN (m / M)
During playback, press SCAN (m or M) repeatedly to select the required scan speed. DVD : bb, bbb, bbbb, bbbbb, bbbbbb or BB, BBB, BBBB, BBBBB, BBBBBB DivX disc, Video CD : bb, bbb, bbbb, bbbbb or BB, BBB, BBBB, BBBBB WMA/MP3, Audio CD : m (X2, X4, X8) or M (X2, X4, X8) During playback, press REPEAT repeatedly to select a desired repeat mode. DVD Video discs: Chapter/Title/Off Video CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off During playback, press REPEAT A-B to select a point A and a point B and repeats a sequence from point A (Starting point) to point B (End point). Press REPEAT A-B to exit. During playback or in the pause mode, press ZOOM to enlarge the video image (3 steps). You can move through the zoomed picture using b B v V buttons. If the current DVD title has a menu, the title menu appears on the screen. Otherwise, the disc menu may appear. The disc menu appears on the screen. During playback, press S-TITLE repeatedly to select a desired subtitle language.

DVD ACD

VCD MP3

DivX WMA

TITLE MENU (SUBTITLE)

DVD DVD DVD DivX

(AUDIO language) During playback, press AUDIO repeatedly to hear a different audio language or audio track. (AUDIO channel) SLOW Press AUDIO repeatedly during playback to hear a different audio channel (STER., LEFT or RIGHT). In the pause mode, press SCAN (m or M) to select the required speed. DVD : t (1/2, 1/4, 1/8, 1/16) or T (1/2, 1/4, 1/8, 1/16) Video CD : T (1/2, 1/4, 1/8, 1/16)
Notes on general features: Zoom may not work on some DVDs. The A-B repeat function is available only in the current title.
Screen Saver The screen saver appears when you leave the unit in Stop mode for about five minutes. Last Scene Memory

Additional features

1.5 times speed playback

DVD VCD ACD MP3 WMA

You can play at 1.5 times speed. The 1.5 speed allows you to watch the pictures and listen to the sound quicker than playing at a normal speed on the disc. 1. During playback, press PLAY(B) to play at 1.5 times speed. BX1.5 appears on the screen. 2. Press PLAY(B) again to exit. Time Search

DVD VCD DivX

This receiver memorizes the last scene from the last disc that is viewed. The last scene remains in the memory even if you remove the disc from the receiver or switch off the receiver. If you load a disc that has the scene memorized, the scene is automatically recalled. Note:

Programmed Playback

The program function enables you to store your favorite tracks from any disc in the receiver memory. A program can contain 300 tracks. 1. Insert a disc. Audio CD and MP3/WMA Discs: 2. Select a track on the List and then press PROG. or select (Add) icon and then press ENTER to place the selected track on the Program list. Repeat to place additional tracks on the list. Note:
You can add all tracks in the disc. Select then press ENTER. (Add All) icon
3. Select the track you want to start playing on the Program list. Press MENU to move to the next page. 4. Press PLAY or ENTER to start. Playback begins in the order in which you programmed the tracks. Playback stops after all of the tracks on the Program list have played once. 5. To resume normal playback from programmed playback, select a track of AUDIO CD (or MP3/WMA) list and then press PLAY. Repeat Programmed Tracks 1. Press REPEAT when playing a disc. The repeat icon appears. 2. Press REPEAT to select a desired repeat mode. TRACK: repeats the current track ALL: repeats all the tracks on programmed list. Off (No display): does not play repeatedly. Erasing a Track from Program List 1. Use v V to select the track that you wish to erase from the Program list. 2. Press CLEAR. Alternatively, select (Delete) icon then press ENTER to place the selected track on the Program list. Repeat to erase additional tracks on the list. Erasing the Complete Program List Use v / V to select ENTER. Note:
The programs are also cleared when the disc is removed.

(Del all) and then press

Viewing a JPEG file
JPEG disc compatibility with this player is limited as follows: Depending upon the size and the number of JPEG files, it could take a long time for the DVD/CD Receiver to read the discs contents. If you dont see an on-screen display after several minutes, some of the files may be too large reduce the resolution of the JPEG files to less than 2M pixels as 2760 x 2048 pixels and burn another disc. The total number of files and folders on the disc should be less than 999. Some discs may not operate due to a different recording format or the condition of disc.
This unit can play discs with JPEG files. Before playing JPEG recordings, read the notes on JPEG Recordings on the right. 1. Insert a disc and close the tray. The PHOTO menu appears on the TV screen.
JPEG Folder 1 JPEG Folder 2 JPEG Folder 3 JPEG Folder 4 JPEG Folder 5 JPEG Folder 6 JPEG Folder 7 JPEG Folder 8

Preview

2. Press v / V to select a folder, and then press ENTER. A list of files in the folder appears. If you are in a file list and want to return to the previous Folder list, use the v / V buttons on the remote control to highlight and press ENTER. 3. If you want to view a particular file, press v / V to highlight a file and press ENTER or PLAY. While viewing a file, you can press STOP to move to the previous menu (JPEG menu). Tips:

Notice for displaying the Divx subtitle
If the subtitle does not display properly during playback, press and hold S-TITLE for about 3 seconds then press S-TITLE to select another language code until the subtitle is displayed properly Tips: Press MENU to move to the next page. On a CD with MP3/WMA, JPEG and MOVIE file, you can switch MUSIC, PHOTO and MOVIE menu. Press TITLE, and MUSIC, PHOTO and MOVIE word on top of the menu is highlighted. Notes: Be sure to select SUBTITLE ON mode by pressing the subtitle file every time before playing a DivX file. When the subtile has more than two languages in the file, original subtile is only available. You can not adjust sound mode and VIRTUAL sound during the DivX file playing.

DVD Audio Discs

DVD Audio is a new disc format building on the success of DVD to provide high quality, uncompressed, multi-channel audio for a new experience in audio quality. A DVD Audio disc can be identified by the DVD audio logo on the disc jacket or on the disc itself. DVD Audio can provide higher quality stereo than Audio CDs with a sampling rate of up to 192kHz (compared to 44.1kHz for CDs). DVD Audio digital sound can be delivered with up to 24 bits of data (compared to 16 bits for a standard CD). A typical DVD Audio disc contains up to seven times the data capacity of a CD. This additional space is used for music, either Advanced Resolution multichannel sound quality that is closer to the artists master recording or for longer recordings. Many DVD Audio discs contain on-screen text, such as artist biographies, playlists, or lyrics. Some DVD Audio discs contain photo galleries or video clips.
Moving to another GROUP Some DVD Audio discs divide content into different groups. Your player enables you to quickly access different groups during playback via the on-screen display. 1. Press DISPLAY during playback on in stop mode. 4 2. Press 3/4 to select Group icon. 3. Press 1/2 or the numbered buttons (0-9) to select a group number. Note: Sometimes the author of the disc creates hidden content that can only be accessed by entering a password. If the lock icon appears on the TV screen, enter the password (sometimes youll find it on the discs jacket cover or on a web site). This password control isnt dictated by your DVD/CD Receiver it is a function of the disc. Since the authoring of DVD Audio Discs varies, some of the on-screen display choices might not be available for the disc youre playing.

The TV is not set to receive DVD signal output.
The video cable is not connected securely. The connected TV power is turned off. There is no sound or only a very low-level sound is heard. The equipment connected with the audio cable is not set to receive DVD signal output. The audio cables are not connected securely. The power of the equipment connected with the audio cable is turned off. The audio connecting cable is damaged. The playback picture is poor. The disc is dirty.
The DVD/CD Receiver No disc is inserted. does not start playback. An unplayable disc is inserted.
The disc is placed upside down. The disc is not placed within the guide. The disc is dirty. A menu is on the TV screen. The Rating level is set. Loud hum or noise is heard. The disc is dirty. The speakers and components are connected poorly. The DVD/CD Receiver is located too close to the TV.
Cause Symptom Radio stations cannot The antenna is positioned or connected poorly. be tuned in.
Correction Connect the antenna securely. Adjust the antennas and connect an external antenna if necessary. Tune in the station manually.
The signal strength of the stations is too weak (when tuning in with automatic tuning). No stations have been preset or preset stations have been cleared (when tuning by scanning preset stations). The remote control does not work properly. The remote control is not pointed at the remote sensor of the DVD/CD Receiver. The remote control is too far from the DVD/CD Receiver. There is an obstacle in the path of the remote control and the DVD/CD Receiver. The batteries in the remote control are flat. The front panel display is too dim. Nothing is displayed on the front panel display.
Preset the stations (page 21).
Point the remote control at the remote sensor of the DVD/CD Receiver. Use the remote control within about 23 ft (7 m). Remove the obstacle.
Replace the batteries with new ones. Press DIMMER on the remote control.

Specifications

Power supply Power consumption Net Weight External dimensions (W x H x D) Operating conditions Operating humidity Laser Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) Video input Video output COMPONENT VIDEO OUT Tuning Range Intermediate Frequency Signal-to Noise Ratio Frequency Response Tuning Range Intermediate Frequency Stereo mode Surround mode