CAUTION: This product employs a Laser System. To ensure proper use of this product, please read this owners manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service center. Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. NOTE TO CABLE/TV INSTALLER: This reminder is provided to call the cable TV system installers attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.

Page 3

IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNERS MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS MANUAL FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for installation, use, and servicing. This product does not contain any parts that can be repaired by the user. DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. 1. Read these instructions. - All these safety and operating instructions should be read before the product is operated. 2. Keep these instructions. - The safety, operating and use instructions should be retained for future reference. 3. Heed all warnings. - All warnings on the product and in the operating instructions should be adhered to. 4. Follow all instructions. - All operating and use instructions should be followed. 5. Do not use this apparatus near water. - For example: near a bath tub, wash bowl, kitchen sink, laundry tub, in a wet basement; or near a swimming pool; and other areas located near water. 6. Clean only with dry cloth. - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over-heating. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturers instructions have been adhered to. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Page 4

Welcome to your new DVD Receiver
Contents Setting up.5-6 Hooking up the unit.7-8 Remote control.9 Main Unit.10 OSD Initial language settings.11 Initial Setting the Area Code.11 Adjust the settings.11-13 Setting the sound mode.13 Displaying Disc Information.14 Playing a disc or file.14-16 Viewing photo files.16 Listening to the radio.17 Listening to music from your portable player.17 Listening to music from your USB device.18 5.1ch ez Set-up.18 Listening to music from your iPod.19 Controlling your TV with the supplied Remote Control20 Language Codes.21 Area Codes.21 Troubleshooting.22 Types of Playable Discs.23 Specifications.24

What is SIMPLINK?

Some functions of this unit are controlled by TVs remote control when this unit and LG TV with SIMPLINK are connected through HDMI connection. Controllable functions by LG TVs remote control; Play, Pause, Scan, Skip, Stop, Power Off, etc. Refer to the TV owners manual for the details of SIMPLINK function. LG TV with SIMPLINK function has the logo as shown above. Use a higher version cable than 1.2A HDMI cable.

Page 5

Setting up
Attaching the speakers to the DVD receiver
a You will have received six speaker cables.
Each one is colour-coded by a band near each end and wires one of the six speakers to the DVD receiver.
Connect the wires to the speakers.
Connect the other end of each wire to the correct speaker according to the colour coding:

COLOUR

Grey Blue Green Orange Red White

SPEAKER

Rear Rear Centre Sub Woofer Front Front

POSITION

Component Video connection
Connect the COMPONENT/PROGRESSIVE SCAN OUTPUT jacks on the unit to the corresponding input jacks on your TV using a Y PB PR cable.
b Plug the power cord into the power source.

Page 8

Hooking up the unit - more you can do

Resolution Setting

You can change the resolution for component video and HDMI output. To change the resolution using setup menu to select the desired resolution - Auto, 480i, 480p, 720p, 1080i, 1080p.
Available resolution according to connection
[HDMI OUT]: Auto, 1080p, 1080i, 720p and 480p (or 576p) [COMPONENT VIDEO OUT]: 480p and 480i [VIDEO OUT]: 480i
Notes on HDMI Out connection
If your TV does not accept your resolution setting, abnormal picture appears on the screen. Please read owners manual for TV, and then set the resolution that your TV can accept. Use the HDMI cable within 5 meters If the volume bar is not displayed on TV screen, restart the unit

HDMI Out connection

Connect the HDMI OUTPUT jack on the unit to the HDMI input jack on a HDMI compatible TV using an HDMI cable.
Enjoying audio form an external source
You can enjoy audio form an external source through your unit. Press INPUT repeatedly to select the desired input source. - AUX, AUX OPT, PORTABLE, USB, OSD IPOD, IPOD
Digital Audio in connection
Connect the units OPTICAL IN jack to jack on optical out of your TV (or Digital Device etc.)

Page 9

Remote control
a INPUT : Changes the input source ( AUX, AUX OPT, PORTABLE, USB, OSD IPOD, IPOD) SLEEP : Sets the System to turn off automatically at a specified time. (Dimmer : Dims the LED (Light-emitting diode) of front panel by half in power-on status.) POWER: Switches the unit ON or OFF. FUNCTION : Selects the function (DVD/CD, FM, AM) TITLE : If the current DVD title has a menu, the title menu appears on the screen. Otherwise, the disc menu may appear. b STOP (x): Stops playback. PLAY (B): Starts playback. Mono/Stereo(St.) PAUSE/STEP (X): Pause playback. SCAN(bb/BB) : Search backward or forward. SKIP(. / >): Go to next or previous chapter/ track. REPEAT: Repeats a Chapter/ Track/ Title/ all. S-TITLE: During playback ,S - TITLE repeatedly to select a desired subtitle language. REPEAT A-B : Repeats sequence. PROG./MEMO. : Accesses or removes Program menu. c TV Control buttons : Controls the TV. See the page 20. AUDIO : Selects an audio language (DVD) or an audio channel (CD). : This button is not available d RETURN (O): Press to move back wards in the menu. SETUP : Accesses or removes setup menu MENU : Accesses the menu on a DVD disc. DISPLAY: Accesses On-Screen Display. CLEAR: Removes a track number on the Program List. b / B / v / V (left/right/up/down):Used to navigate onscreen displays. ENTER : Acknowledges menu selection. PRESET(-/+): Selects programme of Radio. TUN.(-/+): Tunes in the desired radio station. e EQ : You can choose 6 (or 7) fixed sound impressions. VSM : Press VSM to set the Dolby Pro Logic II or VIRTUAL sound. t TVtHT SPK (5.1Ch Ez Set-Up ): Press HT SPK to select the AUX OPT directly MUTE : Press MUTE to mute your unit. You can mute your unit in order, for example, to answer the telephone. VOLUME (+/-) : Adjusts speaker volume. 0-9 numerical buttons: Selects numbered options in a menu.

Adjust the lock settings

To access the lock options, you must enter the 4-digit password. If you have not yet entered a password you are prompted to do so. Enter a 4-digit password. Enter it again to verify. If you make a mistake while entering number, press CLEAR to delete numbers. If you forget your password you can reset it. Press SETUP to display the Setup menu. Input 210499 and press ENTER. The password has now been cleared. Rating Select a rating level. The lower the level, the stricter the rating. Select [Unlock] to deactivate the rating. Password Sets or changes the password for lock settings. [New]: Enter a new 4-digit password using the numerical buttons then press ENTER. Enter the password again to confirm. [Change]: Enter the new password twice after entering the current password. Area code Select a code for a geographic area as the playback rating level. This determines which areas standards are used to rate DVDs controlled by the parental lock. See the Area Codes on page 21.
with stereo sources, optimized for stereo speakers. Listeners may experience amazing virtual surround effects with their own multimedia players.
5.1Ch source [VIRTUAL] mode: The Multichannel sound changes the sound in 5.1 ch
into a virtual one in the 10.1 ch so that it provides such a feeling that you listen to the sound simultaneously from the right and left speakers and center speaker. Set a pre-programmed sound field
This system has a number of pre-set surround sound fields. Select the one which best suits the programme you are watching by pressing EQ repeatedly to cycle through the options: NORMAL, NATURAL, AUTO EQ, POP, CLASSIC, ROCK, JAZZ [AUTO EQ]: AUTO EQ operates only in the MP3/ WMA files which include the information. (ID3 Tag is operated ver.1 only.) WMA file operates to Normal EQ regardless of Tag information.
Adjust the others settings
DivX(R) Registration We provide you with the DivX VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX VOD service. For more information, visit www.divx.com/vod. Press ENTER when [Select] icon is highlighted and you can view the registration code of the unit.

Page 14

Displaying Disc Information

1 Press DISPLAY: 2 Select a item: 3 Adjust the Display menu settings: 4 To return the exit: DISPLAY

Playing a Disc or file

1 Open the disc tray: (On unit: Z) 2 Insert a Disc: (On unit) 3 Close the disc tray: (On unit: Z) 4 Adjust the menu settings: or Select a file from the menu: 5 Start the Disc playing: 6 To stop the Disc playing: vV b B

DISPLAY

Displaying Disc Information - more you can do
You can select an item by pressing vV and change or select the setting by pressing b B.

PLAY STOP

1 ENG D
Current title (or track) number/total number of titles (or tracks) Current chapter number/total number of chapters Elapsed playing time Selected audio language or channel Selected subtitle Selected angle/total number of angles Selected sound mode
Playing a Disc or file - more you can do
Playing a DVD that has a menu

3/2.1CH

Most DVD now have menus which load first before the film begins to play. You can navigate these menus using vV b B to highlight an option. Press ENTER to select.
Skip to the next/previous chapter/track
Symbol Used in this Manual
All discs and file listed below DVD and finalized DVDR/RW DivX files

ALL DVD DivX

Press SKIP (>) to move to the next chapter/track. Press SKIP (.) to return to the beginning of the current chapter/track. Press SKIP (.) twice briefly to step back to the previous chapter/track.

Pause playback

MP3 WMA ACD
MP3 files WMA files Audio CDs
Press PAUSE/STEP (X) to pause playback. Press PLAY (B) to continue playback.

Frame-by-Frame playback

Press PAUSE/STEP (X) repeatedly to play title Frame-by-Frame.

Playing repeatedly

Press REPEAT repeatedly to select an item to be repeated. The current title, chapter or track will be played back repeatedly. To return to normal playback, press REPEAT repeatedly to select [OFF].

Page 15

Fast forward or fast reverse
Mixed disc or USB Flash Drive DivX, MP3/WMA and JPEG
When playing a disc or USB Flash Drive containing with DivX, MP3/WMA and JPEG files together, you can select which menu of files you would like to play by pressing TITLE
Press SCAN (m or M) to play fast forward or fast reverse during playback. You can change the playback speed by pressing SCAN (m or M) repeatedly. Press PLAY (B) to continue play at normal speed.
Selecting a subtitle language
During playback, press S-TITLE ( guage.

Changing the character set to display DivX subtitle correctly
) repeatedly to select a desired subtitle lanDVD
Slow down the playing speed
If the subtitle does not display properly during playback, press and hold STITLE for about 3 seconds then press S-TITLE to select another language code until the subtitle is displayed properly
While playback is paused, press SCAN (bb or BB) to slow down forward or reverse playback. You can change the various playback speed by pressing SCAN (m or M) repeatedly. Press PLAY (B) to continue play at normal speed.

DivX file requirement

Watch and listen 1.5 times faster
Press PLAY when a DVD is already playing to watch and listen to a DVD 1.5 times faster than normal playback speed. B x1.5 will appear in the top right corner of the screen. Press PLAY again to return to normal playback speed.

Viewing the Title menu

Press TITLE to display the disc's title menu, if available.

Viewing the DVD MENU

Press MENU to display the disc menu, if available.
Starting play from selected time
Searches for the starting point of entered time code. Press DISPLAY during playback and select the time clock icon. Input the required start time in hours, minutes, and seconds press ENTER. If you enter the wrong number, press CLEAR to enter again.

Last Scene Memory

DivX disc compatibility with this player is limited as follows: Available resolution size: 800x600 (W x H) pixel The file name of the DivX subtitle is available by 45 characters. If there is impossible code to express in the DivX file, it may be displayed as " _ " mark on the display. If the number of the screen frame is over 30 per 1 second, this unit may not operate normally. If the video and audio structure of recorded files are not interleaved, either video or audio is outputted. If the name of movie file is different from that of the subtitle file,during playback of a DivX file, subtitle may not be display. MPEG4 file extensions:.avi,.mpg,.mpeg Playable DivX subtitle: SubRip(*.srt/*.txt) ,SAMI(*.smi), SubStation Alpha(*.ssa/*.txt) MicroDVD(*.sub/*.txt) SubViewer 2.0(*.sub/*.txt) TMPlayer(.txt), DVD Subtitle System(.txt) (Files (VobSub(.sub)) included with USB device is not supported) Playable Codec format: DIVX3.xx, DIVX4.xx , DIVX5.xx, MP43, 3IVX Playable Audio format: AC3, DTS, PCM, MP3, WMA Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48kHz (WMA) Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA) CD-R/RW, DVDR/RW Format: ISO 9660 Maximum Files/Disc: Less than 999 (total number of files and folders)

Rotate a photo

Use vV b B to rotate the photo in full screen mode.

Screen Saver

The screen saver appears when you leave the unit in Stop mode for about five minutes.

Pause a slide show

Press PAUSE/STEP (X) to pause a slide show. Press PLAY (B) to continue the slide show.
Repeating a specific portion (A-B)
Press REPEAT A-B at the beginning of the portion you wish to repeat and again at the end of the portion. Your selected portion will be repeated continually. To return to normal playback, press REPEAT A-B to select [OFF].

Photo file requirement

JPEG file compatibility with this unit is limited as follows:
Hearing a different audio
During playback, press AUDIO ( ) repeatedly to switch between the available audio languages or encoding methods.
File extensions:.jpg Photo size: Less than 2MB recommended CD-R/RW, DVDR/RW Format: ISO 9660 Maximum Files/Disc: Less than 999 (total number of files and folders)

Page 17

Listening to the radio
Be sure that both FM and AM aerials are connected.
Listening to music from your portable player
The player can be used to play the music from many types of portable player
1 Turn the power on: 2 Select either FM or AM: 3 Select a radio station: 4 To save a radio station: A preset number will show in the display. 5 To select a saved station input the preset number: Up to 50 radio stations can be saved. 6 To confirm press: POWER FUNCTION TUN-/+ PROG/MEMO.

PRESET-/+ PROG/MEMO.

Listening to the radio - more you can do
Look for radio stations automatically
Press and hold TUN.-/TUN.+ for more than a second. The tuner will scan automatically and stop when it finds a radio station.
1 Connect the portable player by plugging the unit into PORT. IN on the front of the player.: 2 Turn the power on: 3 Select the PORTABLE function: 4 Turn the portable player on and start it playing: POWER INPUT -
Choose a preset number for a radio station
When storing a radio station, the preset number can be chosen. When the player automatically shows a preset number, press PRESET -/+ to change it. Press PROG./MEMO. to save your chosen number.

Delete all the saved stations
Press and hold PROG./MEMO for two seconds. ERASE ALL will flash up on the DVD receiver display. Press PROG./MEMO to erase all saved radio stations.
Improve poor FM reception
Press PLAY (B) (MONO/ST). This will change the tuner from stereo to mono and usually improve the reception.

Page 18

Listening to music from your USB device
The advantage of connecting your portable USB player through the systems USB port is that the USB device can be controlled from the system.

USB device requirement

Do not extract the USB device in operating. A back up demands to prevent a data damage. If you use a USB extension cable or USB hub, the USB device might not be recognized. A device using NTFS file system is not supported. (Only FAT (16/32) file system is supported.) The USB function of this unit does not support all USB devices. Digital camera and mobile phone are not supported. This unit is not supported when the total number of files is 1000 or more. If the drive of USB device is two or more, a drive folder is displayed on the screen. If you want to move to the previous menu after you select a folder, press RETURN.
1 Connect the USB device to the unit using a USB cable (not supplied).: 2 Select the USB function: 3 Select a file from the menu: 4 Start your music playing: 5 Before disconnecting the portable USB device, change to any other function by pressing: 6 Remove the USB device: INPUT vV B Listen to sound from TV, DVD and Digital Device with vivid 5.1ch mode. Even in power off mode, if you press HT SPK, then power is on and automatically changed to AUX OPT mode.

FUNCTION or INPUT -

Listening to music from your USB device more you can do

Compatible USB Devices

Devices which require additional program installation when you have connected it to a computer, are not supported. MP3 Player : Flash type MP3 player. The MP3 player requiring installation of a driver is not supported. USB Flash Drive : Devices that support USB2.0 or USB1.1.

1 Connect the units OPTICAL IN jack to jack on optical out of your TV (or Digital Device etc.).: 2 Select the AUX OPT:
To select the AUX OPT directly
t TVtHT SPK FUNCTION or INPUT
3 Listen sound with 5.1ch speaker.: 4 To escape from AUX OPT

Page 19

Listening to music from your iPod
iPod mode: You can operate your iPod by using the supplied remote control and controls on your iPod. TV screen is turned off. iPod will not be charged when selecting the iPod mode. But you can enjoy better sound quality. OSD iPod mode: You can operate your iPod by controlling OSD menu on the TV screen with supplied remote control. The controls on your iPod are not operational in the OSD iPod mode. If you want to charge the iPod while listening music, selects the OSD iPod mode.
Listening to music from your iPod - more you can do

OSD iPod mode iPod mode

Skip to the next/previous file

OSD iPod mode

iPod mode
Press SKIP (>) to move to the next file. Press SKIP (.) to return to the beginning of the current file. Press SKIP (.) twice briefly to step back to the previous file.
Fast forward or fast reverse iPod stand
During playback, press and hold SCAN (m or M) and then release at a point you want.

iPod message

1 Connect the iPod by plugging the unit into iPod on the rear of the unit.: 2 Turn the power on: 3 Select the iPod or OSD iPod function: 4 Select the menu: 5 Select a file: 6 Start the file playing: 7 To stop the file playing: 8 Before disconnecting the iPod, change to any other function by pressing: 9 Remove the iPod: POWER INPUT v V ENTER vV B x PLAY STOP
Please, check your iPod - If the power of your iPod is insufficient or the iPod is misconnected or unknown device. Reset the iPod if the iPod is not operating normally (Refer to http://www.apple.com/support/)

Compatible iPod

When the unit is connected with dock connector may result in malfunctions Compatibility with your iPod may vary depending on the type of your iPod. Depending on your iPods software version, it may not be possible to control your iPod from the unit. We recommend installing the latest software version.

Page 21

Language Codes
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Language Afar Afrikaans Albanian Ameharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali; Bangla Bhutani Bihari Breton Bulgarian Burmese Byelorussian Chinese Code 9072 Language Croatian Czech Danish Dutch English Esperanto Estonian Faroese Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guarani Gujarati Code 7185 Language Hausa Hebrew Hindi Hungarian Icelandic Indonesian Interlingua Irish Italian Javanese Kannada Kashmiri Kazakh Kirghiz Korean Kurdish Laothian Latin Latvian, Lettish Code 7686 Language Lingala Lithuanian Macedonian Malagasy Malay Malayalam Maori Marathi Moldavian Mongolian Nauru Nepali Norwegian Oriya Panjabi Pashto, Pushto Persian Polish Portuguese Code 8084 Language Quechua Rhaeto-Romance Rumanian Russian Samoan Sanskrit Scots Gaelic Serbian Serbo-Croatian Shona Sindhi Singhalese Slovak Slovenian Spanish Sudanese Swahili Swedish Tagalog Code 8476 Language Tajik Tamil Telugu Thai Tonga Turkish Turkmen Twi Ukrainian Urdu Uzbek Vietnamese Volapk Welsh Wolof Xhosa Yiddish Yoruba Zulu Code 9085

Area Codes

Choose a area code from this list.
Area Afghanistan Argentina Australia Austria Belgium Bhutan Bolivia Brazil Cambodia Canada Chile China Colombia Congo Code AF AR AU AT BE BT BO BR KH CA CL CN CO CG Area Costa Rica Croatia Czech Republic Denmark Ecuador Egypt El Salvador Ethiopia Fiji Finland France Germany Great Britain Greece Code CR HR CZ DK EC EG SV ET FJ FI FR DE GB GR Area Greenland Hong Kong Hungary India Indonesia Israel Italy Jamaica Japan Kenya Kuwait Libya Luxembourg Malaysia Code GL HK HU IN ID IL IT JM JP KE KW LY LU MY Area Maldives Mexico Monaco Mongolia Morocco Nepal Netherlands Netherlands Antilles New Zealand Nigeria Norway Oman Pakistan Panama Code MV MX MC MN MA NP NL AN NZ NG NO OM PK PA Area Paraguay Philippines Poland Portugal Romania Russian Federation Saudi Arabia Senegal Singapore Slovak Republic Slovenia South Africa South Korea Spain Code PY PH PL PT RO RU SA SN SG SK SI ZA KR ES Area Sri Lanka Sweden Switzerland Taiwan Thailand Turkey Uganda Ukraine United States Uruguay Uzbekistan Vietnam Zimbabwe Code LK SE CH TW TH TR UG UA US UY UZ VN ZW

Page 22

Troubleshooting

PROBLEM

No power No picture
The power cord is disconnected. The TV is not set to receive the DVD signal. The video cables is not connected securely.

CORRECTION

Plug the power cord into the wall outlet securely. Select the appropriate video input mode on the TV so the picture from the DVD Receiver appears on the TV screen. Connect the video cables securely to both the TV and DVD Receiver. Select the correct input mode of the audio receiver so you can hear the sound from the DVD receiver. Connect the audio cables into the connection terminals correctly. Replace with a new audio cable. Clean the disc using a soft cloth with outward strokes. Insert a disc Insert a playable disc (check the disc type, colour system and regional code). Place the disc with the label or printed side facing upwards. Press SETUP to close the menu screen. Enter your password or change the rating level. Clean the disc using a soft cloth with outward strokes. Move DVD receiver and audio components further away from your TV. Check the antenna connection and adjust its position. Attach an external aerial if necessary. Tune to the station manually. Preset some radio stations, see page 17 for details. Point the remote directly at the unit. Use the remote within 23 feet (7m) of the DVD receiver. Remove the obstacle. Replace the batteries with new ones.

Page 25

LG Electronics, Inc. Limited Warranty - USA
This LG Electronics product, will be repaired or replaced, at LGs option, if it proves to be defective in material or workmanship, under normal use, during the warranty period (Warranty Period) listed below, effective from the date (Date of Purchase) of original consumer purchase of the product. This warranty is good only to the original purchaser of the product and effective only when used in the United States, excluding U.S. Territories. WARRANTY PERIOD: LABOR: 90 days from the Date of Purchase. PARTS: One Year from the Date of Purchase. * Parts replaced are warranted for the remaining portion of the original warranty period. HOW SERVICE IS HANDLED: Call 1-800-243-0000 for instructions on getting the defective unit repaired or replaced. Please retain dated sales receipt and your box to return the unit to LG for repair or replacement. Shipping both ways will be paid by LG during the first 90 days of the Warranty Period. During the remainder of the Warranty Period (91-365 days), you pay inbound shipping charges and LG pays return shipping charges. Visit our website at: http://us.lgservice.com
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG ELECTRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES OF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitation on how long an implied warranty lasts, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights that may vary from state to state. THIS LIMITED WARRANTY DOES NOT APPLY TO: Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration, maintenance or failure to maintain, or separate system components; and Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside environmental specifications or contrary to the requirements or precautions in the Operating Guide, accident, lightning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current or voltage, reception problem caused by inadequate home antenna or faulty antenna connections, computer software, institutional or commercial use, or other causes not arising out of defect in material or workmanship. Therefore, the cost of repair or replacement of such defective product shall be borne by the consumer. CUSTOMER INTER-ACTIVE CENTER NUMBERS:

For nearest Authorized Service Center, Where to buy, Product Assistance, or Customer Assistance
LG ELECTRONICS U.S.A., INC. 1000 SYLVAN AVENUE ENGLEWOOD CLIFFS, NJ.
Call 1-800-243-0000 (24 hours a day, 365 days per year) and select appropriate options from the menu. Or visit our website at http://us.lgservice.com
P/NO : MFL42932912 Issue O Printed in China