INPUT SELECTOR knob (AUDIO/ VIDEO)

@1 @0 !9 !8 !7 !6 !5 !4

SR5001
This knob is used to select the input sources. The video SOURCE, such as TV, DVD, VCR1 and DSS, selects video and audio simultaneously. Audio function sources such as CD, TAPE, CDR/MD, and TUNER may be selected in conjunction with a Video source. This feature (Sound Injection) combines a sound from one source with a picture from another. Choose the video source rst, and then choose a different audio source to activate this function.

SIMPLE SETUP button

Press this button to enter the simple setup mode. You can setup the speaker conditions (speaker sizes, number of speakers, speaker delay times) quickly by pressing the cursor buttons.
o r M.(Multi Room) SPEAKER button (SR5001 only)

DISPLAY button

Press this button to activate the Multiroom Speaker system. MULTI indicator will be illuminated in the display. (See page 46)
When this button is pressed, the FL display mode is changed as Surround Mode Auto-display Off Display Off Input Function and the display off indicator(DISP) lights up in condition of DISPLAY OFF.
SURROUND MODE MULTI MULTI SPEAKER PURE DIRECT SIMPLE SETUP DISPLAY MEMORY CLEAR MUTE ATT STANDBY AUTO POWER ON/STANDBY PHONES HT-EQ MENU
S.(Surround) SPEAKER B button (SR4001 only)

MEMORY button

Press this button to activate the Surround Speaker B system. SPKR B indicator will be illuminated in the display. (See page 47)
Press this button to enter the tuner preset memory numbers or station names. (See page 39)

CLEAR button

INFRARED receiving sensor window
Press this button to cancel the station-memory setting mode or preset scan tuning. (See page 39)
This window receives infrared signals for the remote control.

VOLUME control knob

Adjusts the overall sound level. Turning the control clockwise increases the sound level.
If the selected analog audio input signal is greater than the capable level of internal processing, the PEAK indicator will illuminate. If this happens, you should press the ATT button. ATT is displayed when this function is activated. The signal-input level is reduced by about half. Attenuation will not work with the output signal of REC OUT (TAPE, CD-R/MD, VCR1 and VCR2 output). This function is memorized for each input function.

COMPONENT VIDEO INPUT/ OUTPUT

FM (75) 75

S-VIDEO GND AM TV DVD VCR IN VCR OUT DSS/VCR2 MONITOR OUT INPUT 2 Y

MONITOR OUT 2 Y

L L SL C SBL

CR/PR IN

MULTI. OUT

IN TV DVD

2 DIGITAL IN

FLASHER DC IN TRIGGER

RS-232C SPEAKER C OFF ON

AC IN R L R L R L R L

MODEL NO. SR5001

FRONT B R SR SW SBR

FRONT A

SURROUND BACK

FRONT A OR B,CENTER, SPEAKER C/MULTI SPEAKER FRONT A AND B:MINIMUM 8 OHMS SURR,SURR BACK:MINIMUM 6 OHMS

SPEAKER SYSTEMS

y !0 !9

!4 !5 i !3

If your DVD player or other device has component video connectors, be sure to connect them to these component video connectors on the SR4001/ SR5001. The SR4001/SR5001 has two component video input connectors to obtain the color information (Y, CB, CR) directly from the recorded DVD signal or other video component and one component video output connector to output it directly into the matrix decoder of the display device. By sending the pure DVD component video signal directly, the DVD signal forgoes the extra processing that normally would degrade the image. The result is vastly increased image quality, with incredibly life like colors and crisp detail. When the video convert function is enabled, video and S-video images can be output to the COMPONENT MOINTOR OUT jack.
Speaker outputs terminals
Seven terminals are provided for the front left, front right, front center, surround left, surround right, surround back left and surround back right speakers. Note: You can use surround back speaker terminals as M (Multiroom) SPEAKER B terminals, when you use no surround back speaker.
VIDEO IN/OUT (TV, DVD, VCR1, DSS/ VCR2)

MONITOR OUT

Subwoofer Output
Connect this jack to the line level input of a powered subwoofer. If an external subwoofer amplier is used, connect this jack to the subwoofer amplier input. If you are using two subwoofers, either powered or with a 2 channel subwoofer amplier, connect a Y connector to the subwoofer output jack and run one cable from it to each subwoofer amplier.

DIGITAL INPUT (SR4001 : Dig.1 - 4, SR5001 : Dig.1-5) / OUTPUT (coaxial, optical)
7.1 CHANNEL or AUX2 INPUT
By connecting a DVD Audio player, Super Audio CD multichannel player, or other components that has a multichannel port, you can playback the audio with 5.1 channel or 7.1 channel outputs.
These are the digital audio inputs and outputs. There are 2 digital inputs with coaxial jacks, 2 with optical jacks. The inputs accept digital audio signals from a CD, DVD, or other digital source component. For digital output, there is 1 coaxial output and 1 optical output. The digital outputs can be connected to MD recorders, CD recorders, or other similar components.

HDMI INPUT/OUTPUT

Multiroom Outputs (SR5001 only)
These are the audio output jacks for the Multi zone (Multi room). Connect these jacks to optional audio power amplifiers to listen the source selected by the multiroom system in a remote room.
This unit has 2 HDMI inputs and 1 HDMI output. The input function can be selected from the OSD menu system. (See page 26)
DC TRIGGER output terminal (SR5001 only)
REMOTE CONT. IN/OUT terminals
Connect to a Marantz component equipped with remote control (RC-5) terminals.
Connect a device that needs to be triggered by DC under certain conditions (screen, power strip, etc) Use the system OSD setup menu to determine the conditions by which these jack will be active. Note: This output voltage is for (status) control only, It is not sufcient for drive capability.
AUDIO IN/OUT (CD, TAPE, CD-R, TV, DVD, VCR1, DSS/VCR2)
These are the analog audio inputs and outputs. There are 7 audio inputs (4 of which are linked to video inputs) and 4 audio outputs (2 of which are linked to video outputs). The audio jacks are nominally labeled for cassette tape decks, compact disc players, DVD players and etc. The audio inputs and outputs require RCA-type connectors.
FLASHER IN (Flasher input terminal)
These terminals are to control the unit from each zone. Connect the control signal from a Keypad, etc.
SPEAKER C SELECTOR SWITCH (SR5001 only)

Used to select the speaker system. The speaker system is switched in the following sequence. A B A+B off
(When AMP mode is selected) Used to call up SETUP MAIN MENU and adjust speaker levels or 7.1 ch input level.
CH/CAT3 (UP) / 4 (DOWN) buttons

BASS +/- buttons

MULTI/ CAT

M-SPKR

These buttons are used to change channels.
These buttons are used to adjust the tone control of low frequency sound for left, right and subwoofer speaker.
MULTI/CAT button (SR5001 only) 7 SEND indicator
Indicates when the remote controller is transmitting a signal.

T.TONE /SET UP

(When AMP mode is selected) Used to turn on and off multi room.

T.DISP

F.DIRECT

INFO button

PRESET

TUNING

SUB TITLE

CH-SEL

BASS TV DVD VCR

TREBLE DSS

(When AMP mode is selected) When this button is pressed, the current setting are displayed on the TV monitor.
/ POWER ON and OFF buttons
(When AMP mode is selected) These buttons are used to turn the SR4001/SR5001 on or off.

T.TONE/SET UP button

(When AMP mode is selected) Used to enter the test tone menu.

SURROUND button

This button is used to selects the surround mode.
REMOTE CONTROLLER RC5001SR

P.DIRECT button

When this button is pressed, the tone control circuit is bypassed.

LEARN indicator

9/NIGHT button Pressing this button prevents the Dolby Digital signal from playback at a loud voice. This function reduces the voice by 1/3 to 1/4 at maximum. Thus, it eliminates the occurrence of an abruptly loud voice at night. However, the function is valid only in the case when the Dolby Digital signal is entered into OPTICAL or COAXIAL and data to compress the voice exists in the signal to be played back. When this button is pressed, the NIGHT indicator is illuminated.

CONTROL buttons

BAND/LIP SYNC/INPUT button

VOLUME +/- buttons

AUDIO buttons
(When TUNER mode is selected) Used to select a radio band. (When AMP mode is selected) Used to select LIP SYNC mode. (When TV mode is selected) Used to select monitor input.
This button is used to adjust the volume for the amplier and television. Note: Set the AMP mode to use this button with the SR4001/ SR5001.
(When DVD mode is selected) Used to select one of the audio language.

TREBLE +/- buttons

T.MODE button
(When TUNER mode is selected) Used to select auto stereo mode or mono mode when the FM band is selected. The AUTO indicator lights in the auto stereo mode.
M-SPKR button (SR5001 only)
These buttons are used to adjust the tone control of high frequency sound for left and right speaker.
(When AMP mode is selected) Used to turn on and off multi speaker.

CONTROLLING A MARANTZ CD (CD MODE)
SOURCE ON / OFF POWER OFF POWER ON 0-9 CL MEMO INFO MENU Pause Play Stop Previous/ Next Rewind/ Forward DISC+ Turns the CD player on and off Turns the CD player off Turns the CD player on Inputs the numeric Clears the inputting Programs Scrolls the disc information Switches the display information Pause Play Stop Skips forward or previous track Searchs forward or backward CD changer next disc
CONTROLLING A MARANTZ VCR (VCR MODE)
SOURCE ON / OFF 0-9,+10 LIP SYNC/INPUT CL MEMO CH 3 / 4 MENU ENTER CURSOR EXIT REC Pause Play Stop Previous / Next Rewind / Forward AUDIO Turns the VCR on and off Inputs the numeric Selects TV/VCR Clears the inputting Calls up programming menu Selects VCR channel up or down Calls up the menu Enters the setting Moves the cursor for setting in "On Screen Display" mode Exits the programming menu Record Pause Play Stop Skips forward or previous track Searchs forward or backward Selects the audio language

TREBLE DSS TV

BASS DVD VCR
CONTROLLING MARANTZ COMPONENTS
CONTROLLING A MARANTZ CD RECORDER (CDR MODE)
SOURCE ON / OFF POWER OFF POWER ON 0-9 CL MEMO INFO MENU REC Pause Play Stop Previous / Next Rewind / Forward Turns the CD recorder on and off Turns the CD recorder off Turns the CD recorder on Inputs the numeric Clears the inputting Programs Scrolls the disc information Switches the display information Record Pause Play Stop Skips forward or previous track Searchs forward or backward
CONTROLLING A MARANTZ MD DECK (MD MODE)
SOURCE ON / OFF POWER OFF POWER ON 0-9 CL MEMO MENU REC Pause Play Stop Previous / Next Rewind / Forward Turns the MD deck on and off Turns the MD deck off Turns the MD deck on Inputs the numeric Clears the inputting Programs Switches the display information Record Pause Play Stop Skips forward or previous track Searchs forward or backward
CONTROLLING A MARANTZ TAPE DECK (TAPE MODE)
SOURCE ON / OFF POWER OFF POWER ON 0-9 CL MEMO REC Pause Play Stop Previous / Next Rewind / Forward Turns the TAPE deck on and off Turns the TAPE deck off Turns the TAPE deck on Inputs the numeric Clears the inputting Programs Record Pause Play Stop Skips forward or previous track Searchs forward or backward

VIRTUAL T.MODE

NORMAL MODE
(When operating Marantz AV equipment products) This remote control is preset with a total of 12 types of remote codes, including Marantz TV (television), DVD, VCR (VCR deck), DSS (satellite broadcasting tuner), TUNER, CD, CD-R, MD, TAPE (tape deck), AUX1, AUX2, and AMP (amplier). Learning is not necessary for Marantz products. You can use these products without setting any codes.
Press and hold down the SOURCE button for appliance which should be controlled and press SET button until the SEND indicator blinking twice. Then back light ushes. Aim the remote control at the appliance and slowly alternate between pressing CH+ button and the SOURCE ON/OFF button for the appliance. Stop when the appliance turns off. Press ENTER button once to lock in the code.

135 110

Surround Right

Front Right

Front left and right speakers We recommend to set the front L and R speakers with 45-60 degrees from the listening position. Center speaker Align the front line of the center speaker with the front L/R speakers. Or place the center speaker a little backward from the line.

3. 4. 5.

CONNECTING SPEAKERS
Caution: Be sure to use speakers with the specied impedance as shown on the rear panel of this unit. To prevent damage to circuitry, do not let the bare speaker wires touch each other and do not let them touch any metal part of this unit. Do not touch the speaker terminals when the power is on. It may cause you to receive an electric shocks. Do not connect more than one speaker cable to one speaker terminal. Doing so may damage this unit. Note: Be sure to connect the positive and negative cables for the speaker properly. If they are miss-connected, the signal phase will be reversed and the signal quality will be corrupted.
CONNECTING AUDIO COMPONENTS

CD recorder

DIGITAL OUT OUTPUT L R

Digital Audio (coaxial)

S-VIDEO GND AM TV DVD VCR IN INPUT 2 VCR OUT DSS/VCR2 MONITOR OUT Y

Digital Audio (optical)

R (AUX2) SR SW 7.1CH INPUT SBR MULTI. OUT IN TV DVD OUT VCR1 IN DSS/VCR2 IN CD OUT TAPE IN OUT CDR/MD DIGITAL IN 3 OPT DIGITAL OUT OUT RC-5 FLA

CONNECTING A SUBWOOFER

Use the PRE OUT SUBWOOFER jack to connect a powered subwoofer (power amplier built in). If your subwoofer is a passive type (power amplier is not built in), connect a monaural power amplier to the PRE OUT SUBWOOFER jack and connect the subwoofer to the amplier.
The output audio signal from the TAPE OUT jack and the CD-R/MD OUT jack is the same signal which is currently selected. Caution: Do not connect this unit and other components to mains power until all connections between components have been completed. Notes: Insert all plugs and connectors securely. Incomplete connections may make noise. Be sure to connect the left and right channels properly. Red connectors are for the R (right) channel, and white connectors are for the L (left) channel. Be sure to connect input and output properly. Refer to the instructions for each component that is connected to this unit. Do not bind audio/video connection cables with power cords and speaker cables this will result in generating a hum or other noise.

CD player

OUT IN L R L R

Tape Deck

DIGITAL INPUT

DIGITAL OUTPUT

L R L R L R

Analog Audio

L R R L R L R L L R
CONNECTING DIGITAL AUDIO COMPONENTS
There are 4 digital inputs, 2 coaxial jacks and 2 optical jacks, on the rear panel. You can use these jacks to input PCM, Dolby Digital and DTS bitstream signals from a CD, DVD, or other digital source components. There is one digital output coaxial jack and one optical output jack on the rear panel. These jacks can be connected to a CD recorder-, or a MD deck inputs, respectively. Refer to the instructions for each component. To setup the digital audio format of DVD player, or other digital sources connected to digital input jacks. Use ber optical cables (optical) for DIG-1,2,3 input jacks. Use 75 ohms coaxial cables (for digital audio or video) for DIG-4,5 input jacks. You can designate the input for each digital input/ output jacks according to your component. See page 26.

2-2 SPEAKERS DISTANCE FRONT L : 10 FRONT R : 10 CENTER : 10 SURR.L : 10 SURR.R : 10 SUB W : 10 SURR.B L : 10 SURR.B R : 10 MAIN RETURN ft ft ft ft ft ft ft ft 3.0 m 3.0 m 3.0 m 3.0 m 3.0 m 3.0 m 3.0 m 3.0 m EXIT
3 PREFERENCE STANDBY MODE TV-AUTO OSD INFO BILINGUAL VIDEO CONVERT HDMI DC TRIGGER MAIN : ECONOMY : : ENABLE : MAIN : ENABLE
If you select MANUAL, adjust the output level of each speaker as listed below.
When you move the cursor to FRONT L by pressing the 4 cursor button, the SR4001/ SR5001 will emit a pink noise from the front left speaker. Remember the level of this noise and then press the 4 cursor button. (Note that this can be adjusted to any level between -10 and +10 dB in 1 dB intervals except the subwoofer setting. The subwoofer can be adjusted to any level between -15 and +10 dB in 1 dB intervals.) The SR4001/SR5001 will now emit the pink noise from the center speaker.
Select PREFERENCE in the SETUP MAIN MENU with the 3 or 4 cursor buttons, and press the ENTER button. To select a desired content, press the 3 or 4 cursor buttons.
Notes: Set the distance to each speaker in meters (m) or feet (ft) as follows. m: 0.3 - 9 m in 0.3 m steps ft: 1 - 30 ft in 1 ft steps For the speakers that you have selected NONE the Speaker Size menu will not appear. The setting for Surr.Back L and Surr.Back R appears if you set for it to, two surround back speakers in the Speaker Size menu. The setting of Surr.Back appears if it is set for one surround back speaker in the Speaker Size menu.
STANDBY MODE: When this function is set to ECONOMY, you can reduce the power consumption when the unit is in the standby mode. Note: TV-AUTO and RS-232C are disabled in the ECONOMY setting (SR5001 only). TV AUTO: Select the TV AUTO ON/OFF function to enable or disable with the 1 or 2 cursor buttons. OSD Info: Select the OSD information function to enable or disable with the 1 or 2 cursor buttons. If you select ENABLE, the SR4001/SR5001 will display the status of the feature (Volume up/down, input select, etc.) on the TV monitor. But if you do not desire this information, select DISABLE. BILINGUAL: In the Bilingual mode, Dolby Digital and DTS output is set to either MAIN or SUB. Select BILINGUAL with the 1 and 2 cursor buttons, then select MAIN SUB MAIN+SUB with the 1 or 2 cursor buttons.
2-3. SPEAKERS LEVEL SETTING WITH TEST TONE
Here you will set the volume for each speaker so that they are all heard by the listener at the same level. We recommend using a SPL (Sound Pressure Level) meter, when available. Note: The speaker level settings are not available in 7.1 Channel Input mode, CS mode and Multi Channel Stereo mode.
2-3 SPEAKERS TEST MODE FRONT L CENTER FRONT R SURR.R SURR.B R SURR.B L SURR.L SUB W MAIN RETURN LEVEL : MANUAL : 0 dB : 0 dB : 0 dB : 0 dB : 0 dB : 0 dB : 0 dB : 0 dB EXIT
Using the 1 and 2 cursor buttons, adjust the volume level of the noise from the center speaker so that it is the same level as the front left speaker. Press the 4 cursor button again. The SR4001/ SR5001 will now emit the pink noise from the front right speaker. Repeat steps 2 and 3 above for the front right and other speakers until all speakers are adjusted to the same volume level.

Channel status L, C, R, SL, SR, S, LFE L, C, R, SL, SR, LFE L, R L, R, S L, C, R, SL, SR, S, LFE L, C, R, SL, SR, LFE L, C, R, SL, SR, LFE L, R L, R L, R L, C, R, SL, SR, S, LFE L, C, R, SL, SR, LFE L, R L, R, S L, C, R, SL, SR, S, LFE L, C, R, SL, SR, LFE L, C, R, SL, SR, LFE L, R L, R L, R L, C, R, SL, SR, S, LFE L, C, R, SL, SR, LFE L, C, R, SL, SR, S, LFE L, C, R, SL, SR, LFE L, C, R, SL, SR, S, LFE L, C, R, SL, SR, LFE L, R L, R, S L, R L, C, R, SL, SR, S, LFE L, C, R, SL, SR, LFE L, C, R, SL, SR, LFE L, R L, R L, R, S L, R L, R L, R, S L, C, R, SL, SR, S, LFE L, C, R, SL, SR, LFE L, R L, R, S L, C, R, SL, SR, S, LFE L, C, R, SL, SR, LFE L, C, R, SL, SR, LFE L, R L, R L, R L, C, R, SL, SR, S, LFE L, C, R, SL, SR, LFE L, R L, R, S L, C, R, SL, SR, S, LFE L, C, R, SL, SR, LFE L, R L, C, R, SL, SR, S, LFE L, C, R, SL, SR, LFE L, R L, C, R, SL, SR, S, LFE L, C, R, SL, SR, LFE L, R -
Front information display

OTHER FUNCTION

TV AUTO ON/OFF FUNCTION
This function allows the component connected to the TV-VIDEO in jack to control the power (ON/OFF) to the SR4001/SR5001.
ATTENUATION TO ANALOG INPUT SIGNAL

REC T.DISP PTY F.DIRECT

DOLBY HEADPHONE MODE
This feature simulates the waveforms of the actual sounds heard from the speakers. When headphones are used, the MENU button automatically switches to the Dolby headphone mode. The OSD that appears when the MENU button is pressed is shown below.

HEAD PHONE

VIDEO ON/OFF
When no video signal is connected to the SR4001/ SR5001 or a DVD, etc., is connected directly to your TV, the unnecessary video circuit can be turned off by selecting the VIDEO OFF setting. To select video off, press the AMP button and press the V-OFF button.

TV DVD VCR DSS TUNER

AUTO POWER ON
Be sure the TV auto mode is ENABLED. (Refer page 27 : System Setup) Connect your TV TUNER (etc) to the TVVIDEO in terminal. Be sure to connect the VIDEO input. Turn OFF the power to the TV TUNER and the SR4001/SR5001. Turn ON the TV TUNER and tune in a receivable station. When the station is received, the SR4001/ SR5001 turns ON and TV is selected automatically.

(TUNER)

LISTENING TO THE TUNER

MANUAL TUNING

Frequency scan step for AM is selectable. Default setup is 9 kHz step, if your countrys standard is 10 kHz step, Press BAND button on the remote more than 6 seconds. Scan step will change. Note: Preset memory for the tuner will clear by changing this setup.
ND PURE DIRECT SIMPLE SETUP DISPLAY MEMORY CLEAR
HT-EQ MENU EXIT BAND T-MODE

SIMP SETU

STANDBY AUTO POWER ON/STANDBY PHONES HT-EQ MEN

(Using the SR5001)

AUTO TUNING
To select tuner and desired band (FM or AM), press the BAND button on the front panel Press the 3 or 4 cursor buttons on the front panel to select the desired station.

BASS TREBLE DVD VCR DSS

LIP.SYNC (SR5001 only)
Depending on the image device (TV, monitor, projector, etc.) connected to the SR5001, a time lag can occur between image signal processing and audio signal processing. Though minor, this time lag can interfere with movie and music enjoyment. The LIP.SYNC feature delays the audio signal with respect to the image signal output from the SR5001 to correct the time lag between the sound and image. It can be operated with the LIP.SYNC and 1 and 2 cursor buttons of the remote controller. Set the remote controller to the AMP mode before operating the LIP.SYNC feature. The initial setting is OFF (0 ms).The time lag can be adjusted in 10 ms steps up to 200 ms. Watch the picture on the image device (i.e., TV, monitor, projector, etc.) as you adjust the time lag. Note: The LIP.SYSNC feature turns OFF (0 ms) in the PURE DIRECT mode. When the PURE DIRECT mode is deactivated, the set value of the LIP.SYSNC feature is automatically restored.
Adjust the main volume with the MAIN VOLUME knob or the VOLUME buttons on the remote.
(Using the remote control unit)
To select tuner and desired band (FM or AM), press the BAND button on the remote. Press the 5 or 6 on the remote to tune in the desired station.
To cancel the 7.1 CH. INPUT setting, press the 7.1 CH INPUT button on the front panel or press 7.1 CH IN on the remote. Notes: When the 7.1 CH. Input is in use, you may not select a surround mode, as the external decoder determines processing. In addition, there is no signal at the record outputs when the 7.1 CH. Input is in use.

ND PURE DIRECT SIMPLE SETUP

DIRECT FREQUENCY CALL

SOURCE l/ SET OFF ON AUTO DISPLAY P.DIRECT SURROUND dts LIP SYNC/ INPUT SLEEP DISPLAY P.DIRECT SURROUND
To select tuner and desired band (FM or AM), press the BAND button on the front panel. Press the 3 or 4 cursor buttons on the front panel for more than 1 second to start the auto tuning function. Automatic searching begins then stops when a station is tuned in.

A/D HT-EQ /SET UP EXIT

To select tuner and desired band (FM or AM), press the BAND button on the remote. Press the 5 or 6 for more than 1 second on the remote. Automatic searching begins then stops when a station is tuned in.
To select tuner and desired band (FM or AM), press the BAND button on the remote. Press the F.DIRECT on the remote, display will show FREQ - - - -. Input your desired stations frequency with the numeric buttons on the remote. The desired station will automatically be tuned.
If tuning does not stop at the desired station, use to the Manual tuning operation.

DOWN UP

With this unit you can preset up to 50 FM/AM stations in any order. For each station, you can memorize the frequency and reception mode if desired.

ECEIVER SR5001

SURROUND MODE PURE DIRECT SIMPLE SETUP DISPLAY MEMORY

AUTO PRESET MEMORY

This function automatically scans the FM and AM band and enters all stations with proper signal strength into the memory.
AUTO HT-EQ MENU EXIT BAND T
When in the auto stereo mode, AUTO indicator will be illuminated on the display. The ST indicator is illuminated when a stereo broadcast is tuned in. At open frequencies, the noise is muted and the TUNED and ST indicators are not illuminated. If the signal is weak, it may be difcult to tune into the station in stereo. In such a case, press the T-MODE button on the front panel or remote. AUTO indicator is not illuminated, if FM stereo broadcasts are received in monaural and the ST indicator is not illuminated. To return to auto stereo mode, press the T-MODE button or press T-MODE button on the remote again. AUTO indicator is illuminated on the display.

2. 4. 2. 5. 1. 3.

Tune into the radio station you desire (Refer to the MANUAL TUNING or AUTO TUNING section). Press the MEMO button on the front panel. (preset number) starts blinking on the display. Select the preset number by pressing the 1 or 2 cursor buttons, while this is still blinking (approx. 5 seconds) Press the MEMO button again to enter. The display stops blinking.

Select the desired preset station by pressing the 1 or 2 cursor buttons on the front panel

3. 1. 2.

To select FM, press the BAND button on the front panel. While pressing the MEMO button, press the cursor button. AUTO PRESET will appear on the display, and scanning starts from the lowest frequency.
Press the S or T buttons to select the desired preset station, or input your desired preset channel with the numeric buttons on the remote.

PRESET SCAN

CS EX/ES VIRTUAL T.MODE
The station is now stored in the specied preset memory location. (Using the remote control unit)
Each time the tuner nds a station, scanning will pause and the station will be played for ve seconds. During this time, the following operations are possible. The band can be changed by the BAND button.
Tune into the radio station you desire (Refer to the MANUAL TUNING or AUTO TUNING section). Press the MEMO button on the remote. (preset number) starts blinking on the display. Enter the desired preset number by pressing the numeric buttons.

1. 3. 3.

If no button is pressed during this period, the current station is memorized in location Preset 02. If you wish to skip the current station, press the 3 cursor button during this period, this station is skipped and auto presetting continues.
Note: When entering a single digit number (2 for example), either input 02 or just input 2 and wait for a few seconds.
Press the P.SCAN on the remote. PRESET SCAN appears on the display and then the preset station with the lowest preset number is recalled rst.
Operation stops automatically when all 50 preset memory positions are lled or when auto scanning attains the highest end of all bands. If you desire to stop the auto preset memory at anytime, press the CLEAR button.
Preset stations are recalled in sequence (No.1 No.2 etc.) for 5 seconds each. No stored preset number will be skipped. You can fast forward the preset stations by pressing the T continuously. When the desired preset station is received, cancel the preset scan operation by pressing the CLEAR button or P.SCAN on the remote.
(FM) TUNING MODE (AUTO STEREO OR MONO)

PRESET MEMORY

MANUAL PRESET MEMORY
RECALLING A PRESET STATION
CLEARING STORED PRESET STATIONS
You can remove preset stations from the memory using the following procedure.

SORTING PRESET STATIONS

NAME INPUT OF THE PRESET STATION.
This function allows the name of each preset channel to be entered using alphanumeric characters. Before name inputting, you need to store preset stations with the preset memory operation.

XM NO. 1 NO. 2 NO. 3 NO. 4 NO. 5 NO. 6 NO. 7 NO. 8 NO. 9 MAIN PRESET LIST XM010 XXXXXXXXXX XM011 XXXXXXXXXX XM015 XXXXXXXXXX XM022 XXXXXXXXXX XM125 XXXXXXXXXX XM001 Preview XM001 Preview XM001 Preview XM001 Preview RETURN EXIT
Press the TUNER button twice within two seconds on the remote. Press the P.SCAN. Preset stations are recalled in sequence (No.1 No.2 etc.) for about 5-10 seconds each. The time changes by the received condition. No stored preset number will be skipped. Pressing the T button during prescanning speeds up scanning. Also, pressing the S button returns to the previous preset station.

- - X M 0

Select the preset number by pressing the 1 or 2 cursor buttons, While this is still blinking (approx. 5 seconds)
Press the MEMORY button again to enter. The display stops blinking. The station is now stored in the specied preset memory location.
When the desired preset station is received, cancel the preset scan operation by press the P. SCAN button.
Notes: To clear all stored preset stations, press and hold the CLEAR (CL) and the ENTER buttons for two seconds. There are 50 preset channels prepared at the factory default. The 50 channels are all set to CHANNEL 001. Each channel can be stored in the preset memory. You can search for only the preset channels.
Tune into the desired channel. Press the MEMO button on the remote. - - (preset number) starts blinking on the display. Enter the desired preset number by pressing the numeric buttons.
Note: The preset channel indication disappears in about 5 sec.
If a problem should arise, rst check the following. 1. Are the connections correct? 2. Have you operated the receiver according to the operating instructions? 3. Are the speakers and other components operating properIy? If this unit is not operating properly, Check the items listed in the table beIow. Should the problem persist, there may be a malfuncation. Disconnect the power immediately and contact your store of purchase. SYMPTOM ANTENNA is displayed. NO SIGNAL is displayed. Receiving only XM channels 0 and 1. CAUSE REMEDY
XM terminal and the XM Connect-and- Check that the connection are correct. Play antenna is not properly connected. The signal cannot be received. The XM Tuner is not activated. Reposition your XM Connect-and-Play antenna. Contact XM Radio.

RC5400 UNIVERSAL LEARNING REMOTE
Optional RX7001 RF Extender
The ultimate system controller. The RC5400 comes preloaded with all of the Marantz IR codes and pages to operate your Marantz system right out of the box. It is also fully customizable so you can get design and creative your own pages to really tailor the RC5400 to your system, and your family. Add the optional RX7001 RF extender accessory, now your RC5400 will work even if some or all of your components are behind walls, or closed cabinet doors. Allow the power of the RC5400 become the window to your system, and put that pile of remotes away in a drawer.
Large Monochrome Touch Screen High Resolution 320 x 240 Pixels LCD Display 16 Gray Scales Huge 8MB Non-volatile Flash Memory IR/RF Transmission Capability Digital Contrast Control Editable Macros (250 Commands per Macro) Virtually Limitless Number of Devices, Macros, Panels and Buttons Pre-programmed Marantz Product Templates Setup Protection USB Port for PC Connection Auto-On Pickup Sensor Device/Page Navigation by Cursor Keys Adjustable Auto Shut off Timer Recharging Dock Station Ni-MH Rechargeable Batteries Included Utilizes New Edit Software: Wizz.it Silver/Pearl Finish Optional: RX7001 RF Extender

Life Amplified

*All specifications, dimensions and weights are subject to change without notice. D&M Holdings, Marantz, Marantz America, Inc. or any of its subsidiaries will not assume any liability for errors in this spec sheet which may result in consequential errors being made by retail dealers, designers, custom installers, cabinet makers or end users, etc based upon information contained within this document. 08/07 Marantz America,Inc. 100 Corporate Drive Mahwah, New Jersey 07430 201-762-6500 www.us.marantz.com