DIGITAL DRUM

Instruction Manual

Congratulatons!

Thank you for purchasing this digital drum module. The drum module has been developed to act and play like a drum set but with greater ease. Before you use the instrument, we recommend you to read through this manual.
Taking Care of Your Digital Drum Set

Location

Do not expose the unit to the following conditions to avoid deformation, discoloration, or more serious damage. Direct sunlight. High temperature (near a heat source, or in a car during the day time). Excessive humidity.

Handling and Transport

Never apply excessive force to the controls, connectors or other parts of the instrument. Always unplug cables by gripping the plug firmly, but not pulling on the cable. Disconnect all cables before moving the instrument. Physical shocks caused by dropping, bumping, or placing heavy objects on the instrument can result in scratches and more serious damage.

Power Supply

Make sure to sure use the suitable AC adaptor, and also make sure the AC outlet voltage at your country matches the input voltage specified on the AC adaptor`s label. Turn the power switch OFF when the instrument is not in use. An AC adaptor should be unplugged from the AC outlet if the instrument is not be used for an extended period of time. Unplug the AC adaptor during electric storms. Avoid plugging the AC adaptor into the same AC outlet as appliance with high power consumption, such as electric heaters or ovens. Also avoid using multi-plug adaptors since these can result in reducing the sound quality, operation errors, and possibly damage.

Cleaning

Clean the unit with a dry soft cloth. A slightly damp cloth may be used to remove stubborn grime and dirt. Never use cleaners such as alcohol or thinner. Avoid placing vinyl object on top of the unit (vinyl can stick to and discolor the surface).

Electrical Interference

This instrument contains digital circuitry and may cause interference if placed too close to radio or television receivers. If this occurs, move the instrument further away from the affected equipment.
Turn Power OFF When Making Connections
To avoid damage to the instrument and other devices to which it is connected, turn the power switches of all related device OFF prior to connecting or disconnecting cables.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

Contents

Panel Controls - Front Panel - Rear Panel - Side Panel Setup - Connect the Pads and the Pedal - Connect a MIDI device - Connect a audio equipment - Connect a CD player, etc.(Aux in jack) - Connect Headphones - Connect the Power supply jack Functions - Switch the power ON - Set the main volume - Select a drum kit - Play with a Metronome Play a Song - Select a Song - Listen to the Song - Adjust the Song's volume - Adjust the Song's tempo - Tap tempo function - Mute a Drum part - Play with a Click voice - Use the lighting guide function Create a User Drum Kit - Set a drum voice - Adjust the volume of Pad - Save your drum kit voices Setting - Adjust the pad sensitivity - Set the rejection for each pad - Reverb - Tuning - Factory set Specifications Voice list Preset kit list Song list MIDI implementation chart 16 17

Panel Controls

Front Panel
Volume knob Control the volume of phone and line output. Turn it clockwise to increase the volume and anticlockwise to decrease it.
[ drum off ] button and indicator This button is used to turn on or turn off the percussion of song. Beat indicator
[ save ] button Save current kit setting to a user kit.

Beat of metronome or a song is playing [ click ] button
[ start/stop ] button Start or stop song playing.
Turn on or off the metronome. [ + ] and [ - ] buttons
[ kit ] button Display the drum kit number or reverb setting. [ voice / volume ] button Display the voice number, volume value or pitch value. 3-digit LED display Display the parameters of current menu mode.
These buttons are used to change the setting number of kit, voice, song and adjust the Pad volume. Pad select buttons and indicators Select current pad and adjust the pad volume. When you press them, the corresponding indicator lights up. [ tempo - / + ] and [ tap ] buttons
[ song / volume ] button Display the song number or accompaniment volume value.

Change current tempo.

Rear Panel
MIDI out jack Connect with external sound module. Trigger input jacks Connect with pads, cymbals, hi-hat control, kick trigger.
Aux.in jack Connect with external sound source. Power supply jack ( DC in 9V) Connect an AC adaptor to this jack. Power switch
Output jacks (R, L/mono) Connect with the amplifier or audio system. For monaural output use the L/mono jack.

Turn the power on/off.

Side Panel
Phones jack Connect with to a pair of stereo headphones to this jack. (Connect the headphones will not mute the output jacks.)

Caution!

To prevent electric shock and damage to the device, make sure the power is switched OFF on the drum and all related device before making any connection.
Connect the Pads and the Pedals
Using the provided cables, connect each Trigger input jack on the rear panel of the module, and make sure each pad is connected to its corresponding Trigger input jack. Note: 1. The voice of hi-hat pad hitting is controlled by hi-hat pedal. Similar to a real drum kit, the hi-hat pad functions as an 'open hi-hat' when the pedal is stepped. When the pedal is released, it functions as a 'closed hi-hat'. 2. The valid striking area of a cymbal pad (ride, crash or hi-hat) is near the edge of the pad, which is different from other pads.

to 7 crash to 6 ride

to 3 tom 1 to 8 hi-hat

to 4 tom 2

Drum Module to 2 snare to 1 kick to 5 tom 3

to 9 hi-hat control

Hi-Hat control pedal

Kick Trigger

Connect a MIDI device
This is for you want to use an external sound module or MIDI sequencer. Transmit MIDI Data 1. Use a MIDI cable to connect the MIDI OUT jack on the drum module with the MIDI IN jack on the external MIDI device. 2. This drum will output all the MIDI codes generated by pads hitting or pedal stepping via the MIDI output connector. But clicking and the MIDI codes in songs are excluded.
MIDI OUT MIDI Data MIDI IN MIDI device
Connect a audio equipment

Amplifier Amplifier

1. When you want to listen to the voices with an amplifier, connect amplifiers with the Output L/MONO and R jacks on the rear panel. (For monaural playback, use the L/MONO jack; for stereo playback, connect both L/MONO and R jacks.) 2. The volume is adjusted with the VOLUME knob.
Connect a CD player, etc.(Aux. In jack)
1. The audio output of a CD player, or other audio source, to connect with the AUX IN jack on the rear panel can be mixed with the sound of the drum. This function is convenient that lets you play along with a favourite song. 2. The volume of the external signal is adjusted with the VOLUME knob.

Connect Headphones

An optional set of stereo headphones can be connected with the PHONES jack located on the side of the drum module. * Adjust the volume to a comfortable level.
Connect the Power supply jack
Make sure the power is switched OFF and connect the power adaptor with the DC IN jack on the rear panel. Note: 1. To protect the speakers, amplifier and the drum module from damage, rotate the volume knob to the minimum volume level before switching the power ON. 2. Make sure the power is switched OFF when connecting drum module with external devices.

Functions

Switch the power ON
After confirming all connection have been completed, rotate the volume knob to the left ( minimum volume level) before switching the power on.
Set the power switch to "on" position to switch on the power. Display shows the song's number and its indicator lights up.

Song indicator

Set the main volume
While hitting a pad, gradually rotate the volume knob until a comfortable volume level is reached.

Select a drum kit

The unit comes with 20 (001-020) preset drum kits and 10 user kits (021-030). (Reference song list : page 15.) 1. Press [ kit ] button The current kit number appears and the Kit indicator lights. 2. Press [ + ] or [ - ] buttons to select the drum kit number (001 - 020) you want to use.

Kit indicator

Play with a Metronome
1. Press the [ click ] button to start the metronome. The beat indicator is flashing and the click sound begins to play. 2. Press the [ tempo + ] or [ tempo - ] buttons to set the metronome beat. 3. Press the [ click ] button again to stop the metronome. Adjust the volume of the click sound Hold down the [ click ] button and press the [ + ] or [ - ] buttons to adjust the volume of the click sound, the metronome automatically play. *When playing the metronome: The metronome stops immediately when holding down [ click ] button, and pressing the [ + ] or [ - ] buttons on the click sound. *Volume of the click sound will be reset to default once power is on.

Beat indicator

Play a Song

Select a song

This drum module has a total of 50 preset songs. Note: The preset song setting is 001 after you slide on power. 1. Press [ song / volume ] button. The song indicator lights and the current song's number appears. 2. Press [ + ] or [ - ] buttons to select one of the song and listen to it. Song numbers 001 - 050 are preset songs. (Reference song list : page 16.)

Listen to the song

1. Press [ start/stop ] button and the beat indicator is flashing. After the counting, the song will start playback from the beginning. 2. The song will stop when it reaches the end. You can stop the song during playback by pressing the [ start/stop ] button. * The ASSIGN pad's indicator flashes at the first beat of each measure. Note: The ASSIGN pad's indicator can be lighted off by pressing both [hi-hat] and [kick] buttons at the same time.

Adjust the song's volume

1. Press the [ song / volume ] button to select the volume of song. Display shows : " A XX". (XX = level value, 00 to 31) 2. Press [ + ] or [ - ] buttons to adjust the volume of song accompaniment.

Adjust the song's tempo

1. Press the [ tempo + ] or [ tempo - ] buttons. D isplay shows the current tempo value. 2. Press the [ tempo + ] or [ tempo - ] buttons to increase or decrease the tempo. ( tempo value in the range of 30 to 280) * Holding down either a [ tempo +] or [ tempo - ] buttons to change the setting in a high speed. * Press [ tempo + ] and [ tempo - ] buttons at the same time to reset the tempo to default value. Note: About 2 seconds after you stop pressing the [Tempo] button, display changes to show your selected song, voice or kit number instead of tempo value.

tempo/tap

Tap tempo function
This function allows you to set the song's tempo by tapping in tempo on a pad. 1. Press the [ tempo/tap ] button. Display shows the current tempo value. 2. Tap on the pad in the tempo that you want to get. Tap on the pad 4 times. The last two beats are only detected and are set as your desired speed. 3. The song will be played with your desired tempo you set. When the song is playing, you are not allowed to change the tempo with this tempo function. * Any pads can do the tap tempo function. * If there is no invalid operation, display will quit to the previous menu after 2 seconds.

Mute a Drum part

1. Press [ drum off ] button. The drum off indicator lights. The drum mute function is active. 2. Press [ start/stop ] button to playback the song. The drum part in the song will be muted. 3. To cancel the drum mute function, press [ drum off ] button again. The drum off indicator light goes off. * The drum mute function can be used during song playing.

Drum off indicator

Play with a the Click voice
1. Press the [ click ] button to start the metronome. It will be played with tempo. 2. Press the [ click ] button again to stop the metronome. Note: The click voice will not stop automatically once the song finished until you press the [ click ] button.
Use the lighting guide function
The lighting guide function provides you a valuable lesson to practice or learn the drum kit with playing the preset song. 1. Select the song number you want to practice. 2. Press [ drum off ] button. 3. Press [ start/stop ] button to start song play. 4. Strike the pad in accordance with the lighting of pad's indicators or press the hi-hat pedal and kick the bass drum pad exactly when their indicators light. * During song playing, you can change the Tempo(speed), or use the tap tempo function to set your desired tempo. * Press the [ hi-hat control ] + [ kick ] buttons to turn off all the pad's indicator. Press the [ hi-hat control ] + [ kick ] buttons again to turn on all the pad's indicator.

Create a User Drum Kit

Set a drum voice
The unit comes with 215 high quality percussion sounds that you can assign to any of the drum pad, 3 cymbals, hi-hat control and bass drum. This way you can create your own drum kit that consists of the voice you want. (Reference voice list : page 15.) The kit number 021-030 is use for saving your own drum kit. 1. Press [ voice ] button. The voice indicator lights and the display shows the voice number of this pad. 2. Press [ pad ] button or hit the pad you want to set. The pad indicator light and display shows the current voice number of lighting pad. 3. Press [ + ] or [ - ] buttons to select the voice number you want to assign. 4. Repeat step 2 and 3 for to set the voice for another pad or bass drum.

Pad buttons Voice indicator

Adjust the volume of Pad

This unit allows you to adjust the volume of every voices in the kit that let you control the individual level (volume) of the pads or bass drum. 1. Press the [ voice / volume ] button to select the volume level setting display shows : " L XX". (XX = level value, 00 to 31) The pad button indicator lights and display shows the current volume level of lighting pad. 2. Press the [ PAD ] button or kit the percussion pad you want to adjust. 3. Press the [ + ] or [ - ] buttons to increase or decrease the volume. While you are adjusting, hit the corresponding pad and listen carefully the sound level until reaching the level you want. 4. Repeat step 2 and 3 to adjust the volume of other pad voices.

Volume level value

Pad indicator
Save your drum kit voices
Once completing to your own drum kit, you have to save them in the unit; otherwise your drum kit will be erased when you turn off the unit. 1. Press [ save ] button. The kit number 021 appears and is flashing. 2. Press [ +] or [ - ] buttons to set the kit number (021-030) for saving your drum kit. 3. Press [ save ] button again. The flashing kit number stops. Note: To cancel the save operation, press the [ voice ] button. If there is a fault, the display will show "Err".

Setting

Adjust the pad Sensitivity
You can adjust the sensitivity(gain) of the inputs from pads. 1. Hold down [ kit ] and press [ voice / volume ] buttons. Display shows: "EXX", the pad sensitivity value is indicated. (XX=gain level value, 00 to 15.) 2. Press [ pad ] button or hit the pad you want to set. The pad indicator light. 3. Press [ + ] or [ - ] buttons to adjust the sensitivity of pads. Range : 00-15 Large values will produce a high sensitivity even if the pad is hit softly. Lower values will producing a low sensitivity even if the pad is hit forcefully. 4. Repeat step 2 and 3 for to set the voice for another pad or bass drum. Note: 1. After adjusting the sensitivity value, you can save them into built-in memory. In the sensitivity mode, the sevstivity value is displayed, press [ save ] button and then return to previous display. 2. The drum remains untouched for 10 seconds, the LED will return to previous display. 3. If turn off the power without save, you will lose the changes you have just made.

Set the rejection for each pad
Prevents crosstalk caused by pads or drums connected to other inputs. Events triggered by other pads that are of a lower input value than what is set here will not be delivered for a set lenght of time. 1. Hold down [ voice / volume ] and press [ song / volume ] buttons. Display shows: "JXX", the rejection value is indicated. (XX=rejection level value, 00 to 15.) 2. Press [ pad ] button or hit the pad you want to set. The pad indicator light. 3. Press [ + ] or [ - ] buttons to adjust the sensitivity of pads. Range : 00(no rejection)-15 4. Repeat step 2 and 3 for to set the voice for another pad or bass drum. Note: 1. After adjusting the rejection value, you can save them into built-in memory. In the rejection mode, the rejection value is displayed, press [ save ] button and then return to previous display. 2. The drum remains untouched for 10 seconds, the LED will return to previous display. 3. If turn off the power without save, you will lose the changes you have just made.

Reverb

This function sets the reverb effect of the drum. 1. In " kit mode", press the [ kit ] button, display shows the current reverb setting. 2. Press [ + ] or [ - ] buttons to turn on or turn off the reverb.

Tuning

This function sets the pitch of each drum pad voice. 1. Press the [ voice / volume ] button to select the pitch setting display shows : " P XX". (XX = value, 00 to 15) The pad button indicator lights and display shows the current pitch setting of lighting pad. 2. Press the [ PAD ] button or kit the percussion pad you want to adjust. 3. Press the [ + ] or [ - ] buttons to set the pitch you want. 4. Repeat step 2 and 3 to set the pitch of other pad voice.

Factory reset

This drum module will reset its to initial settings. Beware all the data will be lost. 1. Turn the power off. 2. Turn on the power while holding the [ tempo - ] and [ tempo + ] buttons.

Specifications

Drum Pad: Voices: Drum kits: Song: Controls: 4 drum pads , 3 cymbal pads ,1 hi-hat control pedal , 1 kick trigger 215 voices 20 preset kits, 10 user kits 50 preset songs POWER SWITCH, START/STOP SAVE, KIT, VOICE/VOLUME, , SONG/VOLUME, DRUM OFF, CLICK, HI-HAT, CRASH, RIDE, HI-HAT CONTROL, SNARE, TOM 1, TOM 2, TOM3, KICK, VOLUME, + / -, TEMPO + / -, TAP LED display MIDI OUT Hi-hat control Hi-hat Crash Ride Snare Tom 1 Tom 2 Tom 3 Kick Output (R & L/MONO) Aux in AC adaptor ( 9V)

Display: Connections:

Power Supply:

Voice List

No. Name
Acoustic Base Drum 001 BD Head 002 Real BD Real BD Real BD BD Std BD Std Room BD Room BD Lo BD 010 Rock BD Rock BD Rock BD BD-Var BD-Var Big Drum Big Drum 2 Electronic Base Drum 017 BD-Analg 018 MrDance MrDance MrDance Lo-BD Lo-BD Hard BD 3
Acoustic Snare Drum 024 SD-Std SD-Std SD-Std SD-Std SD-Std SD-R SD-R SD-R Snare Snare Snare Snare Snare SD-Std SD-Std SD-Std SD-Std SD-Std SD-Std SD-Std SD-Std SD-Std SnareDr SnareDr SnareDr SnareDr SnareDr SidStik SidStik SnarTimb 054 Brush Brush Brush Brush Brush Brush Brush Brush RowDrum RowDrum RowDrum 3 Electronic Snare Drum 065 SD-Ana SD-Ana SD-Ana SD-Ana SD-Danc SD-Danc SD-Elec 072 Syn-SD Syn-SD Syn-SD Syn-SD Cool-SD HD-SD 1
Acoustic Tom 078 Tom-Std Tom-Std Tom-Std Tom-Std Tom-Jaz M 083 Tom-Rm 2 F 084 Tom-Jaz F 085 Tom-Rm 2 L 086 Tom-Brs H 087 Tom-Brs M 088 Tom-Brs L 089 Tom-Brs F 090 Tom-BRK H 091 Tom-BRK M 092 Tom-BRK L 093 Tom-BRK F 094 Tom-Rom Tom-Rom Tom-Rom Tom-Rom Tom-Rom Tom-Rom 1 Electronic Tom 100 TomH-A 101 Tom-A Tom-A Tom-A Tom-A Tom-A Tom-T 1 M 107 Tom-T 3 L 108 Tom-T 3 F 109 Tom-El T om-El Tom-El T om-El 1
Cymbal 113 CrashStd 114 CrashBrt 115 CrashSt SftCrash 117 CrashSt CrashSht 119 CrshThin 120 Elcrash 121 CrashRol 122 CrashSt RideBel RK Ride RideBStd 126 Splash C Cymbel Cymbel BigGong BigGong B.Cymbl B.Cymbl S.Cymbl S.Cymb 2 M 135 SmalGong Hi-Hat 136 H.H Cls H.H Cls H.H Cls H.H Opn H.HCNor RK HHcls 142 H.H Opn Open HH Open HH Open HH RK HHOpn 147 Open HH HH pedl HH pedl Ana HH 1

Percussion 151 Agogo-Agogo-Bell Tre 154 Bongo Hi 155 Bongo Lo 156 Cabasa Cabasa Castanet 159 ClapA 160 Clavis Clavis Conga-Hi 163 Conga-M Conga-M Conga-Conga-Conga-CowBell CowBell Cuica H 171 Cuica L 172 Fsnap 173 Guiro Guiro HiQ 176 JingBell 177 Maracas Maracas MetroBel 180 MetroClk 181 Scrach 182 Shake 183 Surdo Surdo Tabla Tabla Tabla Tabla TalkD 190 TalknDrD 191 TalknDrU 192 TalknDrV 193 Tambouri 194 TimbleH 195 TimbleL 196 TimblePH 197 TimblePL 198 Triangle 199 TriagMut 200 VibrSlap 201 Whistal 202 XfadeTri 203 Smallwod 204 BoardDr BoardDr LotusBrd 207 BanbuBrd 208 SouthBan 209 B.WdFish 210 S.WdFis S.WdFis S.WdFis S.WdFis ImpacBel 215 ImpaBel M

Drum Kit List

No. 025 Name Standard 1 Standard 2 Room 1 Room Stick Rhythm & Blues Jazz Jazz Latin Brush Brush 2 Latin 1 User 1 (Electronic 5) User 2(Percussion 1) User 3 (Standard 1) User 4 (Standard 2) User 5 (Dance 1) No. 030 Name Latin 2 Percussion 1 Percussion 2 Dance 1 Dance Stick Orchestra Jungle Electric China Luogu Oriental User 6 (Jazz latin) User 7 (Room 1) User 8 (Electric) User 9 (Brush) User 10 (Room stick)

Song List

No. 025 Name Guitar Funk Fusion 1 Folk Pop Rock 1 Blues Newage Organ Funk Drum & Bass Pop 8 Beat Dance Slow Rock 1 Pop 1 Rock Pop 1 Jazz Ballad 1 6/8 R & B Pop 2 Jazz Ballad 2 Ballad 1 Ballad 2 Ballad 3 Waltz Slow Rock 2 Rock Pop 2 Salsa Beguin No. 050 Name Reggae Shuffle R&B1 Rock N'Roll 1 8Beat 1 8Beat 2 16Beat March Bossanova Funk 1 Fusion 2 Rock N'Roll 2 Hard Rock Rock Pop 3 Funk 2 Funk 3 Jazz Disco House Mambo R&B2 R&B3 Pop Dance Jing Opera Chinese Rhythm
MIDI Implementation Chart
Basic Channel Mode Note Number: Velocity Function. Default Changed Default Messages Altered Transmitted 10 ch X X X ************** 0 - 127 ************** O 9nH, V= 1 - 127 X (9nH. V= 0) X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Remarks
True voice Note on Note off After Key's Touch Channel's Pitch Bend Control 0 Change 123 Program Change: True # System Exclusive System : Song Position Common : Song Select : Tune System : Clock Real Time : Commands Aux : Local ON/OFF : All Notes OFF Messages : Active Sense : Reset O : YES X : NO
Bank Select Modulation Portamento Time Data Entry Volume Pan Expression Sustain Pedal Portamento ON/OFF Sostenuto Pedal Soft Pedal Reverb Program Chorus Program Reverb Level Chorus Level All Sound OFF Reset All Controller All Notes OFF

ART NO.:DD505 VER:V011

ASSEMBLY INSTRUCTIONS Caution !
Watch your fingers when adjusting clamps. They may become pinched resulting in injury. Be careful around pipe ends, inside the pipe and screw ends. Metal shavings, etc. May injure your fingers.

Inside This Package

Before assembly, please make sure that all the items listed below are present.
[CYMBAL 3PCS] box Cymbal Pad x 3 [BASS DRUM PEDAL] box Kick Pad
[DRUM PADS] box Drum Pad x 2
[DRUM PADS] box Drum Pad x 2 Foot Pedal Beater

Metal Rod x 2

[ACCESSORIES] box Cymbal holder (L) x 2 Drumstick x 2
[HI-HAT PEDAL] box Hi-Hat control pedal
Connecting Cable x 9 Cymbal holder (S) Metal Rod [DRUM MODULE] box Drum module Hexagon Key (5mm) Drum Key AC Adaptor Instruction Manual Assembly Instructions

Side Arm (L1)

Side Arm (L2)

Side Arm (R)

Cymbal holder clamp

Holder clamp

Pillar (L)

Connector

Pillar (R)

Cross pipe

Leg (L)
Clamp Cross pipe Connector

Leg (R)

Center Pipe

Rubber Foots

Assembly
1 Setting up the frame of the digital drum set [1] Attach the Pillar (L) to the clamp on the Leg (L). [2] Using the drum key, tighten the screws on the clamp. [3] Remove the screw attached to the connector. [4] Attach the cross pipe to the connector. [5] Reattach the screw into the connector [6] Tighten the screw on the connector. [7] Attach the Pillar (R) to the clamp on the Leg (R). [8] Tighten the screws on the clamp. [9] Attach Center Pipe to the clamp on the Leg (L). [10] Tighten the screws on the clamp. [11] Attach the Right Leg Assembly to the Center Pipe. [12] Tighten the screws on the clamp. [13] Remove the screw attached to the connector [14] Attach the cross pipe to the connector. [15] Reattach the screw into the connector. [16] Tighten the screw on the connector.
Pillar (L) [9] [10] Center Pipe Center Pipe [12] [11] Pillar (L) Pillar (R)

[3],[5],[6]

[4] [1] [6] Cross pipe [7]

Left Leg Assembly

Right Leg Assembly

[13],[15],[16]

[14] [16] Cross pipe
[17] Attach the Side Arm (L1) to the clamp on the Pillar (L). [18] Tighten the screws on the clamp. [19] Attach the Side Arm (L2) to the clamp on the Pillar (L). [20] Tighten the screws on the clamp. [21] Attach the Side Arm (R) to the clamp on the Pillar (R) [22] Tighten the screws on the clamp.

[17] [18]

[22] [21]
2 Attaching the drum pads [1] Loosen the wing nuts on the drum pads. [2] Remove the Metal Rods. [3] Reattach the Metal Rods to the drum pads. [4] Tighten the wing nuts securely.

[1] [2]

Wing nut

Drum Pad Assembly

[5] Attach the drum pads assemblies to the holder clamps and adjust their position, then tighten the wing nuts on the Holder clamps.
[5] Holder clamp Holder clamp [5]
3 Attaching the cymbal pads [1] Attach the Cymbal holders to the Holder clamps on the Side Arms. [2] Tighten the wing nuts on the Holder clamps. [3] Remove the wing nut and the felt washer of each Cymbal holders. [4] Attach the Cymbal pads to the cymbal holders. [5] Reattach the felt washer and wing nut, tighten the wing nut of each cymbal holders.

Cymbal holder (L)

Cymbal holder (S) [1],[2]

[1],[2] [1],[2]

Wing nut [3]

Felt washer [3]

Wing nut Felt washer [4],[5]

Cymbal holder (S)

4 Attaching the Drum Module [1] Attach the Metal Rod to the Drum Module. [2] Tighten the wing screw securely on the Drum Module. [3] Attach the Metal Rod to the Holder clamp on the Side Arm (L1) and adjust the position. [4] Tighten the wind nut on the Holder clamp.

Metal Rod

Wing screw

[3],[4]

5 Attaching the Kick Trigger [1] Attach the Rod to the holders. [2] Attach the Kick Pedal to the Kick Pad. [3] Tighten the wing screw on the Kick Pedal. [4] Loosen the screw. [5] Attach the Beater to the Kick Pedal [6] Position the Beater from the center of the pedal, tighten the screw

[4] Beater

[6] [9] [5]

6 Setup Example

Cymbal Pad

Drum Pad Cymbal Pad

Drum Pad Drum Module

Drum Pad

Hi-Hat control pedal

Kick Trigger

DD505 V003