Mitsubishi HC8600 Projector Lamp Replacement. Manual: ...
A/V Science E-Review of the MITSUBISHI HC6800 1080p 3 Chip LCD Projector.
Showing how well this projector performs.
... by reason of a manufacturing defect in materials or improper workmanship, then MESCA shall repair or replace, at its option, any defective part of the Projector without charge for ... by - modification, alteration, physical abuse or misuse including excessive or continuous operation; usage of replacement lamps which did not originate from MESCA; exposure to smoke, moisture or unusual physical, environmental ... of the Projector in a manner contrary to the instructions outlined in the user manual; or normal wear and tear of the Projector and its components including without limitation ... controls, and any required maintenance including periodic cleaning and replacement of the light source lamp. Please consult the operating instructions enclosed with the Projector for information regarding installation, user ... controls, maintenance and lamp replacement. Also, please note that like all light bulbs, the lamp-life rating is not guaranteed. It is a manufacturer rating ...
... accuracy of the information. Please check your projector or manual to ensure the lamp code & specs is correct for your projector.
ELPLP02 ELPLP09 ELPLP13 ELPLP16 ELPLP17 ELPLP19 ELPLP10B ELPLP19D ELPLP22 ... + MT810, 1000 MT820, 1020 Replacement Lamp for NP1000/2000 Replacement lamp for NP40/50G Replacement lamp for NP60G Replacement lamp for NP4000, NP4001 Replacement Lamp For VT700G, VT800G, NP901WG2, NP905G2 Replacement Lamp For NP1150, NP2150, NP3150, NP3151, NP3250WG2 Replacement Lamp For NP400G/NP500G/NP500WG ... /NP410WG/NP510WG/NP610G/NP 510WSG/NP610SG/NP510WSG/NP610SG Replacement lamp for NP41G, NP43G Replacement lamp for NP61G, NP62G, NP64 Replacement lamp for NP100/200G Replacement lamp for NP4100/4100W (2 lamps required per projector)
NP07LP NP08LP NP09LP NP10LP NP12LP ... TLPX10/X20/MT7
OHPs & Slide Projectors Check your manual or last lamp to determine correct lamp specs
L24/250 L24/250H L24/275 L24/300 L36/400 L36/400H L82/300 ...
... The lights on top of the projector indicate the projector's status.
Power light Lamp light
Refer to the following tables for a complete description of the ... P Red Off Red
Lamp and Status Information
Description It's time to replace the lamp. If you continue to use the lamp after the replacement warning, there is ... the air filter and vents are clean. The projector is overheating, which turns the lamp off automatically. Wait until the projector switches to standby mode (about 5 minutes). Make ... disconnect the power cord, and contact Epson as described. The lamp may be burnt out. First make sure the lamp cover is securely installed. If that's not the problem, ... as described. If this does not resolve the problem, let the lamp cool and then remove it. If the lamp is cracked, replace it as described on page 101. If ... the lamp is not cracked, reinstall it. If reinstalling doesn't work, replace the lamp. If you're using the projector above an ...