Universal Bluetooth Headset H780

MOTOMANUAL

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

English

European Union Directives Conformance Statement
Hereby, Motorola Inc., declares that this H780 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can view your products Declaration of Conformity (DoC) to Directive 1999/5/EC (the R&TTE Directive) at www.motorola.com/rtte.
Caring for the Environment by Recycling
When you see this symbol on a Motorola product, do not dispose the product with household waste.
Recycling Mobile Phones and Accessories Do not dispose of mobile phones or electrical accessories, such as chargers or headsets, with your household waste. In some countries or regions, collection systems are set up to handle electrical and electronic waste items. Contact your regional authorities for more details. If collection systems arent available, return unwanted mobile phones or electrical accessories to any Motorola Approved Service Centre in your region.

FCC Notice to Users

Users are not permitted to make changes or modify the device in any way. Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. See47-CFR-Sec.-15.21. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See-47-CFR-Sec.-15.19(3).

Before you begin

See gure 1 on page 1.
Take a moment before you get started to familiarize yourself with your new H780 Headset. 1 Speaker 2 Call Button 3 Volume Buttons 4 Power Switch 5 Microphone 6 Noise Cancellation Button 7 Indicator Light/Microphone (on side)

Charging your headset

See gure 2 on page 1.
The indicator light turns red when the battery is charging. It may take up to 1 minute for the indicator light to turn on. When the headsets battery is fully charged (about 2 hours), the indicator light turns green. Note: Headset is not functional while charging. This product uses a lithium ion, rechargeable, non-replaceable battery. Your battery is designed to last the life of the product. It should only be removed by a recycling facility. ANY ATTEMPT TO REMOVE OR REPLACE YOUR BATTERY WILL DAMAGE THE PRODUCT.

Quick battery check

While your headset is turned on and not on a call, you can check the battery charge level by pressing and holding both Volume buttons. Note: This feature does not work when headset is in pairing mode. The indicator light displays charge status until you release the buttons. The colour of the light indicates the remaining talk time. Headset Indicator Red Yellow Green Available Talk Time Less than 2 hours From 2 to 4.5 hours Greater than 4.5 hours

Wearing your headset

See gure 3 on page 2
The ear cushion is tted onto the end of your headsets earpiece speaker and placed onto your ear when using your headset. Your H780 headset is supplied with multiple ear cushions. Your headsets performance is greatly dependent upon achieving a good t on your ear. Therefore, we recommend trying all the supplied ear cushions with your headset. You can wear your H780 headset on your left or right ear. The headset comes ready for the right ear. Placing the headset on your ear: see gure 4 on page 2 Placing the headset on the left ear: see gure 5 on page 2
Turning headset on and off
To turn ON your H780, slide the Power switch towards the indicator light. The indicator light rst ashes blue for several seconds, then:
To turn OFF your H780, slide the switch toward the charging plug (the orange color under the switch is displayed). The indicator light will turn off.

Noise cancellation button

See gure 1 on page 1

Your H780 headset has a noise cancellation button that enables you to hear the difference of dual microphone noise cancellation. The dual noise cancellation feature is on by default whenever H780 is powered on. Noise cancellation is always on each time a new call is received or placed. To turn the feature off (or back on), tap the Noise Cancellation button. The button only works during an active call.

Pairing your headset

Your phones Bluetooth feature is off by default. To use your headset, you must turn on the Bluetooth feature in your phone. Please check your phones users guide. Before you can use your headset, you must pair (link) it with your phone. 1 Ensure headset is in pairing mode Power on the headset by sliding Power switch to the On position. The indicator light rst ashes during power up, then initiates pairing. After a few moments, the indicator light will be steadily lit in blue to indicate headset is in pairing mode. If the headset does not enter into pairing mode, see Troubleshooting section. 2 Set your phone to look for your headset discovery, consult your phones users guide. The phone lists Bluetooth devices it nds. Motorola H780 in the list of discovered devices and conrm by following the on-screen prompts. 0000 and conrm. Pairing is successful when the headset indicator ashes purple and blue.

Test and use

Your phone and headset are now paired and ready to make and receive calls. To conrm they are successfully paired and operating properly, place the headset over your ear and make a call from your phone. You will hear ringing from the headset. After you have successfully paired your phone and headset, you do not need to repeat these steps each time you use the headset.
Using your headset : making and receiving calls
Your headset supports both Handsfree and Headset Proles. Accessing call functions depends upon which prole your phone supports. See your phones users guide for more information. Note: some features are phone/network dependent. Function Answer a call Action Tap the call button, hear the ring tone, then a low-to-high tone End a call Tap the Call button, and hear a highto-low tone Reject a call Press and hold either Volume button until you hear a tone Redial last call Press and hold the Call button until you hear a tone Make a voice dial call Tap the Call button and speak the (primary phone) name after the tone Answer a second Press and hold the Call button (places rst incoming call call on hold), and hear a tone Reject second Press and hold either Volume button until incoming call you hear a tone Transfer a call from the headset Slide the power switch to the OFF position to the phone Mute or unmute a call Tap both Volume buttons until you hear a mute tone

Using your headset with a second phone
Multipoint technology allows you to make and receive calls from two Bluetooth enabled devices like your personal and business phones. 1 To pair a second phone to your headset
headset section). 2 To reconnect your headset with your rst phone (and thus be connected to both phones) Motorola H780 from your paired devices list (for details about device discovery, consult your phones users guide) Your headset is now connected to both phones. The last paired phone (your second phone) is now your primary phone for voice dial functionality. After you have successfully paired and connected both phones with your headset, you do NOT need to repeat these steps. Use the following tips when using H780s multipoint technology :
- When answering a call, the idle phone is disconnected from the headset. - When the call ends, the idle phone is automatically reconnected to the headset. phone. tapping the Call button and speaking the name after the tone. H780 off and on again to reconnect

Indicator lights

With No Charger Plugged In
Headset Indicator Off 3 blue ashes Steady blue Quick blue/purple ashes Quick blue ash Quick purple ash Slow blue pulse Slow blue ash Slow green ash Red ash Slow purple pulse Quick red ash Headset Statuts Power off Powering on/off Pairing mode Pairing successful Incoming/outgoing call on primary phone Incoming/outgoing call on secondary phone Connected (on a call) Standby (phone connected, not on a call) Standby (2 phones connected, not on a call) Idle (not connected to phone) Connected call muted Low battery
Note: After 20 minutes on a call or of inactivity, the light stops ashing to conserve power, but the headset remains on. To disable the indicator light, press and hold both Volume buttons while turning headset on. Note : Set your primary and secondary phones to different ring tones to know which phone is ringing when wearing the headset.
With the Charger Plugged In
Headset Indicator Red Yellow Green Headset Status Battery level less than 50% charge Battery level more than 50% charge Charging complete

Audio tones

Audio Tone Ring tone Short tone High to low tone 2 short tones when pressing Volume button during a call Ascending tone Low tone (repeated every 15 seconds) Descending tone Low to high tone No audio indications ; deteriorating quality 2 tones repeated every minute Headset Status Incoming call Phone network not available End call Volume at minimum or maximum Mute enabled Mute reminder Mute disabled Connection conrmation/voice activation Out of range Low battery

Troubleshooting

My headset will not enter pairing mode Make sure that any devices previously paired with the headset are turned off. If the indicator light is ashing in blue, rst turn off the other device, then turn the headset off and on. The indicator light becomes steadily lit in blue indicating the headset is now in pairing mode. My headset will not pair with my phone Turn the headset on by using the Power switch. Press the Call button and both Volume buttons for 5 seconds. The indicator light turns solid blue. The headset is now in pairing mode to complete the pairing process. My phone doesnt nd my headset Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices. My headset worked before but now its not working Make sure your phone is on and the Bluetooth feature is turned on in your phone. If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature and pair your phone and headset again.
If you have any additional questions, please call your hotline number (0870-9010-555) or visit us at www.hellomoto.com.

motorola.com

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Ofce. All other product or service names are the property of their respective owners. The Bluetooth trademark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Motorola, Inc. is under license. 2007 Motorola, Inc. All rights reserved.
6803578F63 - Printed in the EU.