ProSafe 16-port Gigabit Desktop Switch GS116
Power up Your Small Network to Gigabit Speeds

Data Sheet

Now you can have a powerful, high-speed network on a small scale. NETGEARs ProSafe GS116 Gigabit Ethernet Switch lets you build a system that provides full, dedicated 1000 Mbps connections so you can move very large files across your network instantly. The standards-based GS116 helps to protect your existing and future network infrastructure investments by painlessly integrating other 10, 100, and 1000 Mbps devices. This potent switch is ideal for workgroups or quickly upgrading workstations to full Gigabit speed, plus its packed with ease-of-use features to simplify your workday experience. Its compact design fits neatly into small work spaces and, since its self-cooling without a fan, it runs silently and unobtrusively.

Power-Packed

Moves huge files fast! Features 16 high-speed, auto-switching 10/100/1000 Mbps Ethernet connections. And because copper Gigabit Ethernet is a full duplex standard, you can get up to 2000 Mbps on each port. The GS116 supports jumbo frames up to 9,000 Bytes for extra large transfers. Integrates 10, 100, and 1000 Mbps devices on the same network and will honor Layer 2 802.1p and Layer 3 DSCP traffic priority tags. Every port automatically senses the right speed and full/ half duplex mode, while Auto UplinkTM technology automatically adjusts for straightthrough or crossover cables. LEDs embedded in each of the 16 RJ-45 jacks make for easy monitoring. Space-saving dimensions are ideal for desktop or wall-mounting in home, small office, workgroups, departments and conference room environments. Its durable metal case has no fan for silent operation. Compatible with PC, Macintosh, Unix, or Linux operating systems. Providing plug-and-play simplicity with exceptional performance and reliability, the GS116 is a cost-effective solution for your growing network. This switch is made to last and NETGEAR backs it with a lifetime warranty.
1000 Mbps Servers with GA311 Gigabit PCI Adapters

Versatile

Accommodating
GS116 16-port Gigabit Switch Modem Internet
POWER ETHERNET CABLE STATUS USB
1000 Mbps 10/100 Mbps Desktop PCs with GA311 Gigabit PCI Adapters

Broadband Cable Modem

FVS124G VPN Firewall 25
Notebook Macintosh computer with Ethernet connection

TECHNICAL S U P P O R T*

24 / 7
1-888-NETGEAR (638-4327) Email: info@NETGEAR.com
ProSafe 16-port Gigabit Desktop Switch

Technical Specifications

Network Ports 16 RJ-45 auto-sensing UTP ports Forwarding Mode Store-and-forward Performance Bandwidth: 32 Gbps (non-blocking) Forward rate (10 Mbps port): 14,800 packets/sec Forward rate (100 Mbps port): 148,000 packets/sec Forward rate (1000 Mbps port): 1,488,000 packets/sec Latency (100 to 100 Mbps): 40 (max) Latency (1000 to 1000 Mbps): 10 (max) Queue buffer memory: 512 Kbytes per port MAC address database: 8,000 Acoustic noise: 0 dB Heat dissipation: 38.8 Btu/hr AC Power 18W max and 12V @ 15A DC input Status LEDs Power, activity and link indicators for each port Link and speed indicators built into each RJ-45 port Physical Specifications Dimensions (h x w x d): 27 x 285 x 103 mm (1.06 x 11.22 x 4.06 in) Weight: 0.9 kg (2 lb) Environmental Specifications Operating temperature: 0 to 50 C (32 to 122 F) Operating humidity: 10% to 90% noncondensing Safety Agency Approvals CE mark, commercial UL listed (UL 1950) C-Tick Electromagnetic Compliance CE mark, commercial FCC Part 15 Class A EN (CISPR 22) Class A VCCI Class A C-Tick Standards Compliance IEEE 802.3i 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet Honors 802.1p priority tags Honors DSCP priority tags
ProSupport Service Packs Available
On Call 24 x 7 PMB0331-100 (US) PMB0331 (non-US) Xpress HW PRR0331

Package Contents

ProSafe 6-port Gigabit Desktop Switch (GS116) Wall-mount kit AC adapter Installation guide Warranty/support information card

NETGEAR Related Products

Accessories 32-bit Gigabit PCI Adapter (GA311) Gigabit PC Card Adapter (GA511) Switches ProSafe 5-port Gigabit Desktop Switch (GS105) ProSafe 8-port Gigabit Desktop Switch (GS108)

System Requirements

UTP Category 5 or better cables Network card for each PC or server Network software (e.g., Windows, Linux, Mac OS)

Ordering Information

North America: GS116NA Europe - General: GS116GE Europe - UK: GS116UK Asia: GS116AU Japan: GS116JP

Warranty

Switch: NETGEAR Lifetime Warranty Power adapter: NETGEAR 2-year warranty

4500 Great America Parkway Santa Clara, CA 95054 USA 1-888-NETGEAR (638-4327) E-mail: info@NETGEAR.com www.NETGEAR.com
2007 NETGEAR, Inc. NETGEAR, the NETGEAR logo, Connect with Innovation, Everybodys connecting, the Gear Guy logo, IntelliFi, ProSafe, RangeMax and Smart Wizard are trademarks or registered trademarks of NETGEAR, Inc. in the United States and/or other countries. Microsoft, Windows, and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice. All rights reserved. *Free basic installation support provided for 90 days from date of purchase. Advanced product features and configurations are not included in free basic installation support; optional premium support available.
Lifetime warranty for product purchased after 05/01/2007. For product purchased before 05/01/2007, warranty is 5 years. D-GS116-1

Install the Switch and Connect the Other Devices
NETGEAR 16-port Gigabit Switch Model GS116

Troubleshooting

Problem Power light is not lit Action The switch has no power. Make sure that: The power cord is properly connected to the switch. The power adapter is properly connected to a functioning power outlet. If it is in a power strip, make sure the power strip is turned on. If the socket is controlled by a light switch, make sure the switch is in the on position. You are using the NETGEAR power adapter supplied with your switch.
Place the switch on a flat surface or hook onto the screws. For each device, insert one end of an Ethernet cable into the port in the device and insert the other end into one of the Ethernet ports on the switch.
Estimated Time: 510 minutes
Unpack the Box and Verify the Contents
When you open the box, verify that you received everything. The package includes: NETGEAR 16-port Gigabit Switch Model GS116 AC power adapter Wall-mounting screws GS116 Installation Guide (this document) Warranty/support information card If you do not have everything listed above, see the support information card for contact information. If you are missing the support information card, get contact information at http://www.NETGEAR.com in the Technical Support section.
Port number light is There is a hardware connection problem. not lit for a connected Make sure the cable connectors are securely plugged in at the device, or stays on switch and the device. continuously Make sure the connected device is turned on. If the Ethernet cable is connected to a NIC or other Ethernet adapter, make sure the card or adapter is installed correctly and is working. Make sure the cable is less than 328 feet (100 meters).
Prepare to Install the Switch
Decide where you want to place the switch. Find a flat horizontal surface such as a table, desk or shelf. The switch comes with wall-mounting screws. You can use the screws if you want to hang the switch in an open space on a wall. Make sure the selected location is: Not in direct sunlight or near a heater or heating vent. Not cluttered or crowded. There should be at least 2 inches (5 cm) of clear space on all sides of the switch. 4.
Connect the power adapter cord into the back of the switch and then plug the adapter into a power source (such as a wall socket or power strip). The Power light should light up.

Technical Support

Thank you for selecting NETGEAR products. After completing the Smart Wizard configuration assistant, locate the serial number on the bottom label of your product, and use it to register your product at http://www.NETGEAR.com/register. Registration on the website or over the phone is required before you can use our telephone support service. The phone numbers for worldwide regional customer support centers are on the Warranty and Support Information card that came with your product. Go to http://kbserver.netgear.com for product updates and Web support.
Check the LEDs to confirm that all connections are correct.
LED Power RJ-45 ports Activity On: 16-port Gigabit Switch has power. Off: No power. Right LED on: 10 Mbps connection to a powered device. Left LED on: 100 Mbps connection to a powered device. Both LEDs on: 1000 Mbps connection to a powered device. Blink: Activity on this port.
Well ventilated (especially if it is in a closet). Also, you will need one Category 5 (Cat 5) Ethernet cable with RJ-45 connectors for each device you want to connect to the switch. Each Ethernet cable must be less than 328 feet (100 meters).
Technical Specifications Standards compatibility IEEE 802.3i 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, 1000BASE-T Gigabit Ethernet IEEE 802.3x Flow Control; IEEE 802.1p and TOS priority, WRR queuing with four queues. Jumbo Frame Support (up to 9.6 kilobytes/sec.) Network interface Power Weight Dimensions (W x D x H) Operating humidity Electromagnetic compliance Power adapter safety agency approvals RJ-45 connector for 10BASE-T, 100BASE-TX, or 1000BASE-T Ethernet interface 18 W max and 12V @ 1.5A DC input 1.19 kg (2.3 lbs) 285 mm (11.22 in) x 103 mm (4.06 in) x 27 mm (1.06 in)

Regulatory Compliance

Statement of Conditions In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the product described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein. Certificate of the Manufacturer/Importer It is hereby certified that the NETGEAR Model GS116 Gigabit Ethernet Switch has been suppressed in accordance with the conditions set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for example, test transmitters) in accordance with the regulations may, however, be subject to certain restrictions. Please refer to the notes in the operating instructions. Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market and has been granted the right to test the series for compliance with the regulations. Federal Communications Commission (FCC) Compliance Notice: Radio Frequency Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

EN Declaration of Conformance This is to certify that the NETGEAR 16-port Gigabit Switch Model GS116 is shielded against the generation of radio interference in accordance with the application of Council Directive 89/336/ EEC, Article 4a. Conformity is declared by the application of EN Class A (CISPR 22). Canadian Department of Communications Radio Interference Regulations This digital apparatus (NETGEAR 16-port Gigabit Switch Model GS116) does not exceed the Class A limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. Rglement sur le brouillage radiolectrique du ministre des Communications Cet appareil numrique (NETGEAR 16-port Gigabit Switch Model GS116) respecte les limites de bruits radiolectriques visant les appareils numriques de classe A prescrites dans le Rglement sur le brouillage radiolectrique du ministre des Communications du Canada.
Operating temperature 0 to 50 C (32 to 122 F) 10% t0 90% relative humidity, non-condensing CE mark, Commercial FCC Part 15, Class A EN (CISPR 22), C-Tick, VCCI Class A CE mark, Commercial UL listed (UL 1950), C-Tick
Performance Specifications Frame filter rate Frame forward rate 14,800 frames/sec max for 10M port / 148,800 frames/sec max for 100M port/1,488,000 frames/sec for 1000M port 14,800 frames/sec max for 10M port / 148,800 frames/sec max for 100M port / 1,488,000 frames/sec max for 1000M port
This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
Network latency 100 Mbps to 100 Mbps: 40 s max (using 64-byte packets) 1000 Mbps to 1000 Mbps: 10 s max Address database size 8000 MAC addresses Addressing Queue buffer 48-bit MAC address 272 kilobytes
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, this product should be treated and recycled in accordance with the laws of your jurisdiction implementing the WEEE Directive.
2007 by NETGEAR, Inc. All rights reserved. NETGEAR is a registered trademark of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice.

January 18, 2007