Users Manual En Benutzerhandbuch De

Multi-Power Battery Pack

Manuel dutilisation Fr Manual del usuario Es Anvndarhandbok Se Kyttohje Fi Ru Gebruikshandleiding Nl Manual do utilizador Pt Manuale duso It Instrukcja obsugi Pl

MB-D10

q w e r

!3 @0 !8 !7

y u o i
q w e r t y u i o !0 !1 !2 !3 !4 !5 !6 !7 !8 !9 @0 @1 @2

L K J I H H d d

Table of Contents
Safety Precautions..2 Notice for Customers in Europe.2 Precautions for Use...2 En Introduction...4 The MB-D10 and Accessories..4 The MB-D10 and Supplied Accessories.4 The BL-3 Battery-Chamber Cover (Available Separately)..4 Parts of the MB-D10..5 The MB-D10 Shutter-Release Button, Multi Selector, Command Dials, and AF-ON Button..5 The MB-D10 Control Lock..5 Using the Battery Pack..6 Attaching the Battery Pack..6 Removing the Battery Pack..6 Inserting Batteries..7 Removing Batteries..9 Specications.. 10
MB-D10 Multi-Power Battery Pack

Users Manual

Safety Precautions
To ensure proper operation, read this manual thoroughly before using this product. After En reading, be sure to keep it where it can be seen by all those who use the product. Notice for Customers in Europe
This symbol indicates that this product is to be collected separately. The following apply only to users in European countries: This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste. For more information, contact the retailer or the local authorities in charge of waste management.

Precautions for Use

The MB-D10 is for use with compatible cameras only. Do not use with batteries and battery holders not recommended in this manual. The MB-D10 can not be used with rechargeable EN-EL3a/EN-EL3 Li-ion batteries. The MB-D10 can be used with the MS-40 AA battery holder for the MB-40 multi-power battery pack, but performance will be impaired and the number of photographs that can be taken with a single set of batteries will drop. To prevent electrical shorts caused by metal objects touching the power terminals, replace the contact cap when the MB-D10 is not in use. When a battery holder or the optional BL-3 battery-chamber cover is removed from the MB-D10, remove the batteries or place the holder or cover in the holder case to prevent electrical shorts caused by contact with other metal objects. The memory card access lamp may light up when the MB-D10 is attached or removed from the camera, but this is not malfunction. Should you notice smoke or an unusual smell or noise from the battery pack, discontinue use immediately. After removing the batteries, take the device to the retailer or a Nikon-authorized service representative for inspection. The MB-D10 is not equipped with a power switch. Use the camera power switch to turn the power on or o.
Notice for Customers in the U.S.A. Federal Communications Commission (FCC) Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful inter ference in a residential installation. This equipment generates, uses, and can CAUTION radiate radio frequency energy and, if not installed Modications: The FCC requires the user to be notiand used in accordance with the instructions, may ed that any changes or modications made to cause harmful inter ference to radio communicthis device that are not expressly approved by ations. However, there is no guarantee that interNikon Corporation may void the users authority ference will not occur in a particular installation. If to operate the equipment. this equipment does cause harmful interference to radio or television reception, which can be deterNikon Inc., mined by turning the equipment o and on, the 1300 Walt Whitman Road, Melville, New York user is encouraged to try to correct the interference 11747-3064, U.S.A. by one or more of the following measures: Tel.: 631-547-4200 Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Notice for Customers in Canada CAUTION This Class B digital apparatus complies with En Canadian ICES-003. ATTENTION Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada.

Introduction

Thank you for your purchase of an MB-D10 multi-power battery pack for use with all En Nikon single-lens reex digital cameras that list the MB-D10 as a compatible accessory in the camera manual. The MB-D10 takes one EN-EL3e, EN-EL4a, or EN-EL4 rechargeable battery or eight AA batteries (alkaline, Ni-MH, lithium, or nickel-manganese) and includes an alternate shutter-release button, AFON button, multi selector, and main and sub-command dials for taking pictures in tall (portrait) orientation. Camera menu options allow the user to choose whether the camera battery or the batteries in the MB-D10 are used rst; see the camera manual for details.
The MB-D10 and Accessories
The MB-D10 and Supplied Accessories Conrm that the following items are supplied with the MB-D10 (batteries are sold separately).
MS-D10EN holder for EN-EL3e batteries
MS-D10 holder for AA batteries

Holder case

The MS-D10EN is inserted in the MB-D10 at shipment. See Inserting Batteries for information on removing the battery holder.

Contact cap

Users manual (this manual) Warranty
The BL-3 Battery-Chamber Cover (Available Separately) A BL-3 battery-chamber cover (available separately) is required when using EN-EL4a or EN-EL4 batteries.
BL-3 battery-chamber cover
Parts of the MB-D10 (Figure A)
q Contact cap w Holder for camera contact cover e Signal contacts r AFON button t Main command dial y Multi selector u Attachment wheel i Battery-chamber cover o Battery-chamber latch !0 Battery chamber !1 Mounting screw !2 Power terminals !3 Shutter-release button !4 Control lock !5 Sub-command dial !6 Tripod socket !7 MS-D10EN holder for EN-EL3e batteries !8 Power terminals !9 Power terminals (EN-EL3e battery holder) @0 MS-D10 holder for AA batteries @1 Power terminals (AA battery holder) @2 BL-3 battery-chamber cover (available separately) The MB-D10 Shutter Release Button, Multi Selector, Command Dials, and AF-ON Button The MB-D10 is equipped with a shutter-release button (Figure A- ), multi selector (Figure A- ), main command dial (Figure A- ), sub-command dial (Figure A- ), and AFON button (Figure A- ) En for use when taking photographs in vertical (tall, or portrait) orientation. These controls perform the same functions as the corresponding controls on the camera and are aected by changes to options in the Custom Settings menu (Group a for the AFON button, Group f for other controls) that aect these camera controls. See the camera manual for more information. The MB-D10 Control Lock The control lock (Figure A- ) locks the controls on the MB-D10 to prevent unintended use. Before using these controls to take photographs in vertical (portrait) orientation, select to release the lock as shown at right. The control lock is not a power switch. Use the camera power switch to turn the camera on and o.

Using the Battery Pack

Attaching the Battery Pack Before attaching the battery pack, be sure that the camera is o and that the MB-D10 control lock En (Figure A- ) is in the L position (the illustrations show the D300). 1 Remove the contact cap (Figure A- ) from the battery pack. 2 The contacts for the MB-D10 are in the base of the camera, where they are protected by a contact cover. Remove the contact cover as shown in Figure B- and place it in the contact cover holder on the MB-D10 (Figure B- ). 3 Insert the MB-D10 (Figure C), keeping the MB-D10 mounting screw (C- ) aligned with the camera tripod socket (C- ). There is no need to remove the battery from the camera before connecting the MB-D10. At default settings, the battery inserted in the camera will be used only after the battery in the MB-D10 is exhausted. The [Battery order] option in the camera Custom Settings menu (Group d) can be used to change the order in which the batteries are used. See the camera manual for details. 4 Tighten the attachment wheel by rotating it in the direction shown by the LOCK arrow (Figure D). Removing the Battery Pack To remove the MB-D10, turn the camera o and set the control lock on the MB-D10 to L, then loosen the attachment wheel and remove the MB-D10. Be sure to replace the contact cover on the camera and the contact cap on the MB-D10 when the battery pack is not in use.
Be sure to place the camera contact cover in the contact cover holder to prevent loss. A PB-6D and PK-13 auto-extension ring are required when using PB-6 bellows with the MB-D10.
Inserting Batteries The MB-D10 can be used with one EN-EL3e, EN-EL4a, or EN-EL4 rechargeable Li-ion battery, or with eight AA batteries. A BL-3 battery-chamber En cover (available separately) is required when using an EN-EL4a or EN-EL4 battery. Before inserting batteries, be sure that the camera is o and that the MB-D10 control lock is in the L position. 1 Turn the MB-D10 battery-chamber latch to 2 Ready the batteries as described below. EN-EL3e: Matching the indentations on the battery to the projections on the MS-D10EN holder, insert the battery with the arrow () on the battery toward the battery holder power terminals (Figure F- ). Press the battery lightly downward and slide it in the direction of the arrow until the power terminals click into place (Figure F- ). EN-EL4a/EN-EL4: If the battery release on the optional BL-3 battery-chamber cover is positioned so that the arrow ( ) is visible, slide the battery release to cover the arrow (Figure G- ). Insert the two projections on the battery into the matching slots on the BL-3 (Figure G- ) and slide the BL-3 battery lock release to reveal the arrow. AA: Place eight AA batteries in the MS-D10 battery holder as shown in Figure H, making sure that the batteries are in the correct orientation. 3 Insert the battery or battery holder in the MB-D10 and latch the battery-chamber cover (Figure I). Make sure the battery or holder is fully inserted before turning the latch. 4 Turn the camera on and check the battery level in the control panel or viewnder. If the camera does not turn on, check that the battery is correctly inserted. and remove the battery holder (Figure E).

Battery Level The camera displays battery level as follows: EN-EL3e, EN-EL4a, and EN-EL4 Batteries Control panel Viewnder Description Battery fully charged. L

K J I H H

Battery partially discharged. Low battery. Ready spare batteries. Battery exhausted. Shutter release disabled.

(blinks)

(blinks) AA Batteries
Control panel Viewnder Description Charge remaining. L Low I d sparebatteries. Ready batteries. Batteries exhausted. H d Shutter release (blinks) (blinks) disabled.
An option in Group d of the camera Custom Settings menu can be used to change the order in which the batteries are used. When the camera is drawing power from the MB-D10, a icon is displayed in the control panel. To ensure that the camera shows the correct battery level when AA batteries are used, choose the appropriate option for [MB-D10 battery type] in the camera Custom Settings menu (Group d). If the correct option is not selected, the camera may fail to function as expected. Option 1 LR6 (AA alkaline) 2 HR6 (AA Ni-MH) 3 FR6 (AA lithium) 4 ZR6 (AA Ni-Mn) Battery type AA alkaline (LR6) AA Ni-MH (HR6) AA Lithium (FR6) AA nickel-manganese (ZR6)
Battery Info Battery information (including calibration information for EN-EL4a and EN-EL4 batteries) can be viewed from the camera setup menu (the camera battery is listed on the left, the MB-D10 on the right). Only the battery level is listed when AA batteries are used. See the camera manual for details.
Remove the batteries when the MB-D10 is not in use.
Note: The illustrations on this page are from the D300.
Removing Batteries Be careful not to drop batteries, the holder, or the optional battery-chamber cover. 1 Turn the MB-D10 battery-chamber latch to and remove the battery holder (Figure E).
2 Remove the battery or batteries from the holder or optional battery-chamber cover. EN-EL3e While pressing the holder PUSH button, slide the battery toward the button. The battery can then be removed as shown. EN-EL4a/EN-EL4 Slide the battery release in the direction indicated by the arrow ( ) and remove the battery-chamber cover. AA Batteries Remove the batteries as shown. Be careful not to drop the batteries when removing them from the holder.

Specications

Power source One EN-EL3e, EN-EL4a, or EN-EL4 rechargeable Li-ion battery or eight LR6 alkaline, HR6 Ni-MH, FR6 lithium, or ZR6 nickel-manganese AA batteries C (F) Approx. 150.75.5 mm/5.9 2.0 3.0 in. Approx. 290 g (10.2 oz), with MS-D10EN but excluding batteries

En Operating temperature

Dimensions (W H D) Weight
Specications and design are subject to change without notice.
EN-EL3e, EN-EL4a, and EN-EL4 Batteries The performance of EN-EL3e, EN-EL4a, and EN-EL4 batteries drops at temperatures below about 10 C (50 F). Be sure the battery is fully charged and keep a warm spare battery on hand ready to exchange as necessary. Cold batteries will recover some of their charge when warmed. AA Batteries Due to their limited capacity, AA LR6 alkaline and ZR6 nickel-manganese batteries should be used only when no other alternative is available. Use is not recommended at low temperatures. In general, AA batteries have less capacity than other power sources when used in the MB-D10; EN-EL3e, EN-EL4a, and EN-EL4 batteries are recommended for best performance. The capacity of AA batteries varies with make and storage conditions and may in some instances be extremely low; in some cases, AA batteries may cease to function before their expiry date. Note that the capacity of AA batteries may drop at temperatures below 20 C (68 F). Frame Advance Rate EN-EL4a/EN-EL4 and AA batteries support higher frame advance rates than the EN-EL3e. For more information on frame advance rates, see the camera manual.

MB-D10

EN-EL3e MS-D10EN

AA MS-D10

( )
MS-D10EN MB-D10 . MS-D10EN 9 1 .
BL-3 . EN-EL4a EN-EL4 BL-3 .
q w MB-D10 e r AF t y u i o !0 !1 !2 !3 !4 !5 !6 !7 EN-EL3e MS-D10EN !8 !9 EN-EL3e @0 AA MS-D10 @1 AA @2 BL-3 ( )

, ,

MB-D10 ( A- ), ( A- ), ( A- ), ( A- ) . . f [ ] , MB-D10 . .
MB-D10 AF ( A- ) . a [ ] [MB-D10 AF-ON ] . .

(MB-D10)

MB-D10 , MB-D10 ( A- ) . MB-D10 , . . ON/ OFF .

( D300 .)

MB-D10 OFF , MB-D10 ( A- ) L . 1. MB-D10 ( A- ). MB-D10 MB-D10 . 2. MB-D10 ( B- ). MB-D10 MB-D10 ( B).
MB-D10 OFF , MB-D10 L .
3. MB-D10 ( C). ( ) ( ) MB-D10 . MB-D10 . MB-D10 , . d [ / ] [ ] MB-D10 . . 4. LOCK ( D).
MB-D10 MB-D10 . MB-D10 . PB-6 PK-13 PB-6D .
MB-D10 Li-ion EN-EL3e, EN-EL4a, EN-EL4 (1) AA (8). EN-EL4a/EN-EL4 BL-3 . OFF MB-D10 L . 1. MB-D10 ( E). , MB-D10
3. AA MB-D10 , I . . 4. ON . ON .
2. AA . [EN-EL3e] EN-EL3e EN-EL3e ( F- ). EN-EL3e ( F- ). [EN-EL4a/EN-EL4] BL-3 EN-EL4a/EN-EL4 BL-3 ( ( ) ( G- ). EN-EL4a/EN-EL4 BL-3 (G- ), ( . [AA ] AA 8 + - ( H). ) )
[ ] EN-EL3e, EN-EL4a, EN-EL4
AA , d [ / ] [MB-D10 ] AA . .
1 LR6 (AA ) LR6 AA HR6 AA 2 HR6 (AA Ni-MH) FR6 AA 3 FR6 (AA ) ZR6 AA ( , 4 ZR6 (AA Ni-Mn) )
EN-EL3e, EN-EL4a EN-EL4 MB-D10 , . MB-D10 . EN-EL4a EN-EL4 . .

AA .

. . . .

. . . . .

MB-D10 . d [ / ] MB-D10 . MB-D10 .

D300 .

. 1. MB-D10 ( E). 2. . EN-EL3e PUSH PUSH . EN-EL4a/EN-EL4 ( ) . AA . . , MB-D10
(WHD) Li-ion EN-EL3e (1), EN-EL4a (1), EN-EL4 (1) AA (LR6 , HR6 , FR6 , ZR6 , 8 ) 0~40 150.55275.5 mm 290 g (MS-D10EN , EN-EL3e )

EN-EL3e, EN-EL4a EN-EL4

( 10 ) . , . .
, ( , ) , . , . . . 20 . .
Li-ion EN-EL4a/EN-EL4 AA EN-EL3e . .

2007 Nikon Corporation

Printed in Japan SB8K02(F2) 6MAK53F2-02