Pixagent

Engineered Workflow

WT-2/WT-2A Setup Guide

Infrastructure Setup for Windows XP

Service Pack 2 or Later

Written by Thomas Sapiano First Edition

www.pixagent.com

Nikon WT-2/2A Transmitteror Later Windows XP Service Pack 2 Setup Guide for Windows XP SP2
This document provides step-by-step instructions on how to configure your Nikon WT-2/WT-2A wireless transmitter and computer to communicate with one another. Each step is provided with a screenshot to make the setup process as easy as possible.

System Requirements

Operating System: Software:
Windows XP Service Pack 2 or later Pixagent ITP 2.0.NET Framework 1.1 IEEE802.11b or IEEE802.11g Card Wireless Access Point/Router Nikon D2Hs/D2X Nikon WT-2/WT-2A

Wireless Setup Guide

Step 1

Step 2

Hardware:

Internet Links

http://www.pixagent.com/itp20/ http://www.pixagent.com/support/ support@pixagent.com
After downloading ITP 2.0 from the Pixagent Follow the directions in the installation wizard to website, open the compressed file and run Setup.Exe place the ITP 2.0 files on your computer. to begin the install process.

Step 3

Step 4
When prompted whether to allow anonymous logins, leave the checkbox empty and click the When the Create First User window pops up, enter a new username and password pair and click Continue. button to move on. the Create User button.

Step 5

Step 6
Select the location where you would like ITP to Select the network adapter that the wireless place the received image files on your computer. transmitter will use to communicate with your Click the Continue button when you are done. computer and click Continue.

Step 7 Step 8

Windows XP Service Pack 2 or Later

Firewalls

Now that the installation process is complete, ITP is now set up and opperational on your computer. Your next task is to configure the camera so that it knows how to communicate with your computer. To begin this process, double click on the ITP tray icon (shown above) in order to launch the Control If the Windows Firewall is enabled on your computer, Centre interface. you will be prompted to continue blocking ITP. When this dialog pops up, select the Unblock button to allow ITP to receive connections from the camera. This is necessary for proper operation of your system. Firewalls are designed to protect computers from outside threats. One of the mechanisms used to do this is to block any connection that does not originate from the computer/network. For normal users this typically isnt a problem as the tasks they perform are initiated by the user. These image transmitters work in a different manner, however. When an image is ready to be transmitted, the camera is the one that initiates the connection. As such,in their default configuration, most firewalls will attempt to prevent this action from taking place. When that happens, the camera will be unable to connect to your computer. If you are using firewall software other than the one supplied with Windows XP you may need to perform additional steps. In order for the camera to function correctly, the firewall must be configured to allow incoming FTP traffic (TCP/IP port 21). The way that you do this depends on the firewall being used, so please read the instructions that came with it.

Step 9

Step 10
Once the Control Centre interface comes up, enter the wireless settings that you are currently using in the blue section. Please refer to the settings used in your access point/router for the correct values.
Once the specified settings have been selected, click the Configure WT-1/WT-2/WFT-E1 link to begin the process of configuring your camera. Follow the provided directions to load these settings onto a memory card.

During the installation process, you are prompted to select the network adapter used for your transmitter. Whenever ITP is started, it will automatically take steps to configure this adapter to operate with your transmitter. As such, if you switch to using another adapter you should change your selection in the Configure Adapter entry in the ITP tray menu to ensure that these features continue to operate.
Selecting your wireless network adapter.

Step 11

Preferred Networks
Windows XP wireless networking subsystem allows you to maintain a list of preferred networks. This list allows you to control the priority of different access points that you typically connect to. Once a network has been added to this list you can select it and move Remove the CF card from your computer and insert it up and down with respect to it into the camera with the WT-2 attached. Wait the other networks. for the green light to go out, then press the Menu Select the Wireless LAN entry and press the button. Navigate to the Set Up tab (the bottom tab) controller pad right to configure the WT-2 ITP User Accounts transmitter. and continue on to the next step. In order to connect to an FTP server, the camera must supply login information to identify itself. The installation process will create the first user for you, however if you would like you can create more users by clicking the Add User link in the red section of the Control Centre. In addition to providing a basic layer of security, user accounts also allow you a greater degree of control. For instance, the files transmitted using each account are saved in different locations. This allows you to easily keep images from different cameras and/or shooters separate from Once the Wireless LAN menu appears select the Wireless Select the Load settings file entry and instruct the camera to retrieve the settings from the card. LAN system entry and switch it to the OFF position. one another.

Step 12

Step 13

Step 14

Step 15

Step 16

If everything has worked correctly, the transmitter will now be functional. If you havent done so yet, take a picture to ensure that it is transmitting correctly. If it is not working, please see the troubleshooting section. When the settings have been loaded, return to the Wireless LAN menu. Return to the Wireless LAN system entry and switch it back to ON.

Complete

Wireless Network Settings
During step nine of the setup process, you were asked to enter the wireless settings into the blue section of the control centre. In order for the WT-2 to function properly, these values must be entered correctly and completely. If you are unsure about any of these values, please read on for a quick summary of the required information and how to obtain it.

Encryption

The Nikon WT-2/2A supports both WEP and WPA encryption. When enabled in both the camera and the laptop, all transmitted images will be encrypted to prevent anyone from intercepting them. For simplicity sake, this guide leaves this feature disabled. For most people this encryption is not necessary - however if you are concerned about this you can turn it on.

SSID (Network Name)

The SSID (Service Set IDentifier) is a unique name that identifies a wireless network. All devices operating on your network use this name to find and connect to the correct access point. It is important to note that this value is case sensitive so make sure that you enter it exactly as written. If you are unsure of the name of your network, simply right-click on your wireless network adapters tray icon and select View Available Wireless Networks. This will list all of the networks in range, as well as tell you the name of the network that your computer is currently connected to.

Channel

Specifies the frequency at which the wireless network will operate. When used with Infrastructure networks, the channel is automatically determined so this field cannot be modified in this mode.
Wireless networks can optionally be configured to encrypt data travelling over them to prevent third par ties from intercepting private information. In order to use this, all devices on the network must be configured with the same encryption mode and key. For instructions on configuring your network to operate in this mode, please see the documentation that came with your wireless This field selects the type of WiFi network that access point/router. you would like to connect to. Infrastructure networks (the type covered in this guide) are wireless networks based around dedicated access points. Ad-Hoc networks are a simpler form of wireless networking where devices can communicate directly with one another.
Encryption Mode & Key

Network Type

Troubleshooting Guide 2 or Later Windows XP Service Pack
The WT-2 is a complex device and problems may arise when trying to set it up the first time. This section is designed to guide you through the process of identifying those problems and rectifying them.

Troubleshooting

If the profile was not properly loaded onto the card the Load settings file? entry will be greyed out as shown in the following screen capture:
Step 1: Ensure settings have been loaded properly.
Sometimes the WT-2 will not properly load all of the settings from the memory card. It can be very sensitive to the manner in which you leave the menus after loading the settings file. Please carefully repeat steps 12-15 in the instructions in order to reload the settings. If it is still not connecting properly, please check the settings in the camera and compare them to the ones listed in the instructions contained in this document.
If this happens, please replace the Compactflash card back into the computer. Return to the Control Centre and press the Configure WT-1/WT-2/ WFT-E1 link to reload the profile on the card. Repeat steps 10 through 15, taking special care to ensure that the drive letter specified in step 10 is correct. It is advised that you verify your selection in Windows Explorer before going on. If ever ything was done correctly this time, the entry should be available and you will be able to continue on.
Step 2: Use the Connection Wizard to isolate the problem.
The WT-2 offers a connection wizard to help simplify the setup process. As you enter the settings into this system, it will try them immediately. This allows you to test each value and identify which setting is causing the problem. To initiate the connection wizard go to the top level of the Wireless LAN menu in the camera, switch OFF the Wireless LAN system and press the button. Open the ITP Control Centre on your computer and use the values provided there to configure the camera via this interface.
Step 2A: Select the wireless network.
Once the connection wizard is started, it will first show you a list of available wireless networks. Select the appropriate network and then press the Enter button to move on to the next step. If the selected network uses encryption, you may be prompted for additional information.
Step 2B: Enter network settings.
After the camera has connected to the appropriate wireless network, the next step is to specify the TCP/IP properties. If the fields arent already set, use the values specified in the green section of the Control Centre. Press the Enter button on the camera to commit the settings. If you receive a TCP/IP Error message from the camera, go back and verify that the values have been entered correctly.
If you are having problems, the three LEDs on the back of the WT-2 are the best way to diagnose them. This legend describes the various patterns to help you troubleshoot the source of the problem.

Step 2C: Specify the server address (your computer).
The next step in the wizard prompts you to specify the server that you would like the images transmitted to. The IP Address value in the red section of the Control Centre should be entered at this stage. Press the enter button to commit the selection and move on. If the camera generates an Unable to Locate Server error, then verify that you have entered the value correctly. If that fails, go to the end of the address and press the trashcan button several times to clear out any extra whitespace characters (as the WT-2 is sensitive to this). If the problem persists, verify that the correct adapter is selected in the red section and try the other values available in the IP Address dropdown.
The WT-2 has successfully connected to your computer, and is currently transmitting images.

Transmitting

The WT-2 has successfully connected to your computer, but is not currently transmitting images.

Connected

The WT-2 is trying to connect to the FTP server but has not been able to do so.

Trying to Connect

Step 2D: Provide login credentials.
Once the camera has successfully connected to ITP, it needs a username and password for authentication purposes. If you have created a user account, enter the username and password here. If you have enabled anonymous logins, simply check the appropriate box. Press enter to test your settings and move on.
The transmitter has run into a problem that is preventing the connection from being formed.

Connection Failure

Step 2E: Specify destination folder.

Connection Status

In this field you will generally want to leave the Home folder box checked and press Enter to move on. Use the ITP interface to specify the destination folder.
When the laptop has associated with a network, this icon will be shown beside its name in the list of networks. This signals that the computer is now ready to communicate with other devices using the same SSID.

Available

Step 3: Check software firewalls running on the laptop.
If you are running any software firewalls (other than the Windows firewall) on your laptop, check the settings to ensure that they are not blocking incoming FTP traffic. Each product works in a different way so detailed directions are beyond the scope of this document.

The laptop has detected the presence of this network. It has not associated with it, however it is available to connect to.

Unavailable

This icon is displayed beside networks that the laptop cannot find in the vicinity. You may be out of range or the camera may not be turned on.
Step 4: Verify you are connected to the network.
Return to the View Available Wireless Networks dialog and make sure that you are connected to the network that you created. If you are not connected, select the network from the list and click the Connect button.
Step 5: Verify that ITP is running properly.
Right-click on the ITP icon (A) in the system tray. If the Start Server entry (B) is not greyed out, select it. Try the WT-2 again to see if it is working. If ITP is already running then try to connect to 127.0.0.1 with FTP client software. If you are unable to connect then double check your settings in ITP and any firewall software you are running.

Still having problems.

If the above troubleshooters still have not resolved your problems, please feel free to contact us at support@pixagent.com. Some problems need more complex debugging steps that will require personal attention. You can also visit us at:

ITP Registration

If you have not already done so, please register your copy of ITP 2.0 so that we can notify you of any future updates to the software. Our registration data is not shared with any outside parties and will only be used as you specify on the registration form. This information helps us keep our customers up to date on any improvements made in our products. If you wish, you may also be placed on the list of potential beta-testers for upcoming versions of our software.

http://www.pixagent.com

Copyright 2006 Thomas Sapiano. All rights reserved. This document is protected by Canadian copyright law and may not be reproduced without the explicit consent of its author. IP networking can be a complex topic and no single setup will work in all situations. These directions assume a standard configuration and may not function under all circumstances. As such, this document is provided on an as-is basis without warranty - by using this document the reader accepts all responsibility for their actions. The author does not accept any responsibility for problems that may occur while following these directions.

Pixagent

Engineered Workflow

WT-2/WT-2A Setup Guide

Ad-Hoc Setup for Windows XP

Service Pack 2 or Later

Written by Thomas Sapiano First Edition

www.pixagent.com

Nikon WT-2/2A Transmitteror Later Windows XP Service Pack 2 Setup Guide for Windows XP SP2
This document provides step-by-step instructions on how to configure your Nikon WT-2/WT-2A wireless transmitter and computer to communicate with one another. Each step is provided with a screenshot to make the setup process as easy as possible.

System Requirements

Operating System: Software:
Windows XP Service Pack 2 or later Pixagent ITP 2.0.NET Framework 1.1 IEEE802.11b or IEEE802.11g Card Nikon D2Hs/D2X Nikon WT-2/WT-2A

Wireless Setup Guide

Step 1

Step 2

Hardware:

Internet Links

http://www.pixagent.com/itp20/ http://www.pixagent.com/support/ support@pixagent.com
After downloading ITP 2.0 from the Pixagent Follow the directions in the installation wizard to website, open the compressed file and run Setup.Exe place the ITP 2.0 files on your computer. to begin the install process.

Step 3

Step 4
When prompted whether to allow anonymous logins, leave the checkbox empty and click the When the Create First User window pops up, enter a new username and password pair and click Continue. button to move on. the Create User button.

Step 5

Step 6
Select the location where you would like ITP to Select the network adapter that the wireless place the received image files on your computer. transmitter will use to communicate with your Click the Continue button when you are done. computer and click Continue.

Step 7 Step 8

Windows XP Service Pack 2 or Later

Firewalls

Firewalls are designed to protect computers from outside threats. One of the mechanisms used to do this is to block any connection that does not originate from the computer/network. For normal users this typically isnt a problem as the tasks they perform are initiated by the user. These image transmitters work in a different manner, however. When an image is ready to be transmitted, the camera is the one that initiates the connection. As such,in their default configuration, most firewalls will attempt to prevent this action from taking place. When that happens, the camera will be unable to connect to your computer. If you are using firewall software other than the one supplied with Windows XP you may need to perform additional steps. In order for the camera to function correctly, the firewall must be configured to allow incoming FTP traffic (TCP/IP port 21). The way that you do this depends on the firewall being used, so please read the instructions that came with it.
If the Windows Firewall is enabled on your computer, you will be prompted to continue blocking ITP. When this dialog pops up, select the Unblock button to allow ITP to receive connections from the camera. This is necessary for proper operation of your system.
Once the install procedure is complete, you now have to configure your computer to create an ad-hoc network for the camera to connect to. This type of network allows your camera and computer to communicate without the need for any additional equipment. To create the network, right click on your wireless adapters tray icon and select View Available Wireless Networks.

Step 9

Step 10
Once the Wireless Network Connection dialog is open, Select the Wireless Networks tab in the resulting click on the change advanced settings link on the left window to configure the wireless settings for this side of the window. network adapter.

Ad-Hoc Networks

The 802.11 standard provides a mode called ad-hoc to allow devices to connect directly to one another. This allows you to use your system out in the field without being dependant on routers or AC power.

Step 11

Step 12
Click the Add button to begin the process of creating In the resulting dialog, enter the settings a new ad-hoc network on this computer. specified in the fields highlighted above and click OK to create the new network.

Step 13

Preferred Networks
Windows XP wireless networking subsystem allows you to maintain a list of preferred networks. This list allows you to control the priority of different access points that you typically connect to. Once a network has been added to this list you can select it and move it up and down with respect to When returned to the previous dialog, click the the other networks. Unfortunately, it will not allow Advanced button to configure the computer to you to place ad-hoc networks connect to your new network. (like the one you are setting up here) above infrastructure (access-point based) networks. As such, we need to tell the OS to ignore any infrastructure networks that it may come upon as you are working.

Step 14

Select the Computer-to-computer (ad hoc) networks only entry from the list and click Close to commit the settings and dismiss the remaining dialogs.

Step 15

Step 16

ITP User Accounts

After a moment, the computer will create the new In order to connect to an FTP server, the camera must supply network and will be ready to use. login information to identify itself. The installation process will create the first user for you, however if you would like you can create more users by clicking the Add User link in the red section of the Control Centre. In addition to providing a basic layer of security, user accounts also allow you a greater degree of control. For instance, the files transmitted using each account are saved in different locations. This allows you to easily keep images from different cameras and/or shooters separate from one another. Once the Control Centre interface comes up, enter the wireless settings you have specified into the blue section. If you used the values specified above, the only setting you will need to change is the Network Type to Ad-Hoc. Now that ITP and the computer have been set up, we need to configure your camera. To begin this process, double click on the ITP tray icon.

Step 17

Step 18
Once the specified settings have been selected, click the Configure WT-1/WT-2/WFT-E1 link to begin the process of configuring your camera. Follow the provided directions to load these settings onto a memory card.
During the installation process, you are prompted to select the network adapter used for your transmitter. Whenever ITP is started, it will automatically take steps to configure this adapter to operate with your transmitter. As such, if you switch to using another adapter you should change your selection in the Configure Adapter entry in the ITP tray menu to ensure that these features continue to operate.
Selecting your wireless network adapter.

Step 19 Step 20

Static IP Addresses
Most devices on home networks are configured to automatically retrieve network data from the router. Since there is no router in ad-hoc configurations this information needs to be manually entered into both devices. Remove the CF card from your computer and insert it into the camera with the WT-2 attached. Wait for the green light to go out, then press the Menu Select the Wireless LAN entry and press the button. Navigate to the Set Up tab (wrench icon) controller pad right to configure the WT-2 transmitter. and continue on to the next step.

WiFi SSIDs

Wireless networks must be given a unique name so that devices will connect to the correct system. Under the 802.11 standard this network name is called the SSID.

Step 21

Step 22

Encryption

The Nikon WT-2/2A supports both WEP and WPA encryption. When enabled in both the camera and the laptop, all transmitted images will be encrypted to prevent anyone from intercepting them. For simplicity sake, this guide leaves this feature disabled. For most people this encryption is not necessary - however if you are concerned about this you can turn it on.
Once the Wireless LAN menu appears select the Wireless Select the Load settings file entry and instruct the camera to retrieve the settings from the card. LAN System entry and switch it to the OFF position.

Step 23

Step 24
If everything has worked correctly, the transmitter will now be functional. If you havent done so yet, take a picture to ensure that it is transmitting correctly. If it is not working, please see the troubleshooting section. When the settings have been loaded, return to the Wireless LAN menu. Go to the Wireless LAN System entry and switch it back to ON.

Complete

Troubleshooting Guide 2 or Later Windows XP Service Pack
The WT-2 is a complex device and problems may arise when trying to set it up the first time. This section is designed to guide you through the process of identifying those problems and rectifying them.

Troubleshooting

If the profile was not properly loaded onto the card the Load settings file? entry will be greyed out as shown in the following screen capture:
Step 1: Ensure settings have been loaded properly.
Sometimes the WT-2 will not properly load all of the settings from the memory card. It can be very sensitive to the manner in which you leave the menus after loading the settings file. Please carefully repeat steps 20-23 in the instructions in order to reload the settings. If it is still not connecting properly, please check the settings in the camera and compare them to the ones listed in the instructions contained in this document.
If this happens, please return the Compactflash card back into the computer. Return to the Control Centre and press the Configure WT-1/WT-2/ WFT-E1 link to reload the profile on the card. Repeat steps 18 through 23, taking special care to ensure that the drive letter specified in step 18 is correct. It is advised that you verify your selection in Windows Explorer before going on. If ever ything was done correctly this time, the entry should be available and you will be able to continue on.

Step 2: Use the Connection Wizard to isolate the problem.
The WT-2 offers a connection wizard to help simplify the setup process. As you enter the settings into this system, it will try them immediately. This allows you to test each value and identify which setting is causing the problem. To initiate the connection wizard go to the top level of the Wireless LAN menu in the camera, switch OFF the Wireless LAN system and press the button. Open the ITP Control Centre on your computer and use the values provided there to configure the camera via this interface.
Step 2A: Select the wireless network.
Once the connection wizard is started, it will first show you a list of available wireless networks. Select the appropriate network and then press the Enter button to move on to the next step. If the selected network uses encryption, you may be prompted for additional information.
Step 2B: Enter network settings.
After the camera has connected to the appropriate wireless network, the next step is to specify the TCP/IP properties. If the values arent already set, use the values specified in the green section of the Control Centre. Press the Enter button on the camera to commit the settings. If you receive a TCP/IP Error message from the camera, go back and verify that the values have been entered correctly.
If you are having problems, the three LEDs on the back of the WT-2 are the best way to diagnose them. This legend describes the various patterns to help you troubleshoot the source of the problem.
Step 2C: Specify the server address (your computer).
The next step in the wizard prompts you to specify the server that you would like the images transmitted to. The IP Address value in the red section of the Control Centre should be entered at this stage. Press the enter button to commit the selection and move on. If the camera generates an Unable to Locate Server error, then verify that you have entered the value correctly. If that fails, go to the end of the address and press the trashcan button several times to clear out any extra whitespace characters (as the WT-2 is sensitive to this). If the problem persists, verify that the correct adapter is selected in the red section and try the other values available in the IP Address dropdown.
The WT-2 has successfully connected to your computer, and is currently transmitting images.

Transmitting

The WT-2 has successfully connected to your computer, but is not currently transmitting images.

Connected

The WT-2 is trying to connect to the FTP server but has not been able to do so.

Trying to Connect

Step 2D: Provide login credentials.
Once the camera has successfully connected to ITP, it needs a username and password for authentication purposes. If you have created a user account, enter the username and password here. If you have enabled anonymous logins, simply check the appropriate box. Press enter to test your settings and move on.

The transmitter has run into a problem that is preventing the connection from being formed.

Connection Failure

Step 2E: Specify destination folder.

Connection Status

In this field you will generally want to leave the Home folder box checked and press Enter to move on. Use the ITP interface to specify the destination folder.
When the laptop has associated with a network, this icon will be shown beside its name in the list of networks. This signals that the computer is now ready to communicate with other devices using the same SSID.

Available

Step 3: Check software firewalls running on the laptop.
If you are running any software firewalls (other than the Windows firewall) on your laptop, check the settings to ensure that they are not blocking incoming FTP traffic. Each product works in a different way so detailed directions are beyond the scope of this document.
The laptop has detected the presence of this network. It has not associated with it, however it is available to connect to.

Unavailable

This icon is displayed beside networks that the laptop cannot find in the vicinity. You may be out of range or the camera may not be turned on.
Step 4: Verify you are connected to the network.
Return to the View Available Wireless Networks dialog and make sure that you are connected to the network that you created. If you are not connected, select the network from the list and click the Connect button.
Step 5: Verify that ITP is running properly.
Right-click on the ITP icon (A) in the system tray. If the Start Server entry (B) is not greyed out, select it. Try the WT-2 again to see if it is working. If ITP is already running then try to connect to 127.0.0.1 with FTP client software. If you are unable to connect then double check your settings in ITP and any firewall software you are running.
Connecting to the Internet
The process listed above will prevent your laptop from connecting to conventional wireless networks. If you use a WiFi network for your internet access, then you will have to reverse the changes made in step 14 above to allow this.

ITP Registration

If you have not already done so, please register your copy of ITP 2.0 so that we can notify you of any future updates to the software. Our registration data is not shared with any outside parties and will only be used as you specify on the registration form. This information helps us keep our customers up to date on any improvements made in our products. If you wish, you may also be placed on the list of potential beta-testers for upcoming versions of our software.

Still having problems.

If the above troubleshooters still have not resolved your problems, please feel free to contact us at support@pixagent.com. Some problems need more complex debugging steps that will require personal attention. You can also visit us at:

http://www.pixagent.com

Copyright 2006 Thomas Sapiano. All rights reserved. This document is protected by Canadian copyright law and may not be reproduced without the explicit consent of its author. IP networking can be a complex topic and no single setup will work in all situations. These directions assume a standard configuration and may not function under all circumstances. As such, this document is provided on an as-is basis without warranty - by using this document the reader accepts all responsibility for their actions. The author does not accept any responsibility for problems that may occur while following these directions.