You can read, write, send and save text and multimedia messages, e-mail, audio and flash messages. The messaging services can only be used if they are supported by your network or service provider.
Text and multimedia messages

Text messages

Your device supports the sending of text messages beyond the limit for a single message. Longer messages are sent as two or more messages. Your service provider may charge accordingly. Characters with accents or other marks, and characters from some language options, take up more space, and limit the number of characters that can be sent in a single message. An indicator at the top of the display shows the total number of characters left and the number of messages needed for sending. Before you can send any text or SMS e-mail messages, you must save your message center number. Select Menu > Messaging > Message settings > Text messages > Message centres > Add centre, enter a name, and the number from the service provider.
Important: Exercise caution when opening messages. Messages may contain malicious software or otherwise be harmful to your device or PC. To check availability and to subscribe to the multimedia messaging service (MMS), contact your service provider. You also may download the configuration settings. See "Nokia support," p. 9.

Create a text message

1. Select Menu > Messaging > Create message > Text message. 2. Enter one or more phone numbers or e-mail addresses in the To: field. To retrieve a phone number or e-mail address, select Add. 3. For an SMS e-mail, enter a subject in the Subject: field. 4. Write your message in the Message: field. 5. To send the message, select Send.
Create a multimedia message
Multimedia messages and multimedia plus messages
A multimedia message can contain text, pictures, sound clips, and video clips. A multimedia plus message can contain also any other content, even files not supported by your phone.
Add text, images, video or sound clips, business cards or calender notes into different slides and send them as an multimedia message. 1. Select Menu > Messaging > Create message > Multimedia. 2. Scroll to a slide and select Insert and a content type from the list.

Call duration, Packet data counter, or Packet data conn. timer to view the general information on your recent communications Message log to view the number of sent and received messages Note: The actual invoice for calls and services from your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth.
Note: Some timers may be reset during service or software upgrades.

Positioning

The network may send you a position request (network service). Contact your service provider to subscribe and to agree upon the delivery of positioning information. To accept or reject the position request, select Accept or Reject. If you miss the request, the phone automatically accepts or rejects it according to what you have agreed with your network operator or service provider.
To view the information on the 10 most recent privacy notifications and requests or to delete them, select Menu > Log > Positioning > Position log > Open folder or Delete all.

Settings

Profiles
Your phone has various setting groups called profiles, which you can customize with ringing tones for different events and environments. Select Menu > Settings > Profiles, the desired profile, and from the following options: Activate to activate the selected profile Personalise to change the profile settings
Timed to set the profile to be active until an end time. When the time set for the profile expires, the previous profile that was not timed becomes active.

Themes

A theme contains elements for personalizing your phone. Select Menu > Settings > Themes and from the following options:
Select theme Open the Themes folder, and select a theme. Theme downloads Open a list of links to download more themes.
Font size to set the font size for messaging, contacts, and web pages Operator logo to display the operator logo Cell info display to display the cell identity, if available from the network
You can change the tone settings of the selected active profile. Select Menu > Settings > Tones. You can find the same settings in the Profiles menu. If you select the highest ringing tone level, the ringing tone reaches its highest level after a few seconds.

Date and time

To change the clock type, time, time zone, and date settings, select Menu > Settings > Time and date > Time, Date, or Auto-update of date & time (network service).
Select Menu > Settings > Display and from the available options: Wallpaper to add a background image for the standby mode Active standby to activate, organize, and personalize the active standby mode Standby mode font colour to select the font color for the standby mode Navigation key icons to display the icons of the scroll key shortcuts in the standby mode when active standby is off Screen saver to create and set a screen saver Power saver to dim the display automatically and to display a clock when the phone is not used for a certain time Sleep mode to switch off the display automatically when the phone is not used for a certain time

Setup a Bluetooth connection
3. To connect your phone with an audio enhancement, select Search for audio enhancements and the device that you want to connect. 4. To connect your phone with any Bluetooth device in range, select Paired devices > New. Select a device and Pair. Enter a passcode (up to 16 characters) on your phone and allow the connection on the other Bluetooth device. If you are concerned about security, turn off the Bluetooth function, or set My phone's visibility to Hidden. Always accept only Bluetooth communication from others whom you trust. PC connection to the internet
Select Menu > Settings > Connectivity > Bluetooth and take the following steps: 1. Select My phone's name and enter a name for your phone. 2. To activate Bluetooth connectivity select Bluetooth > indicates that Bluetooth is active. On.

Packet data

General packet radio service (GPRS) is a network service that allows mobile phones to send and receive data over an internet protocol (IP)-based network. To define how to use the service, select Menu > Settings > Connectivity > Packet data > Packet data connection and from the following options: When needed to set the packet data connection to established when an application needs it. The connection will be closed when the application is terminated. Always online to automatically connect to a packet data network when you switch the phone on You can connect a compatible PC to the phone by Bluetooth or USB data cable and use the phone as a modem. For details refer to Nokia PC Suite. See "Nokia support," p. 9.

Data transfer

Synchronize your calendar, contacts data, and notes with another compatible device, a compatible PC, or a remote internet server (network service). Transfer contact list To copy or synchronize data from your phone, the name of the phone and the settings must be in the list of transfer contacts. If you receive data from another device, the corresponding transfer contact is automatically added to the list, using the contact data from the other device. Server sync and PC sync are the original items in the list. To add a new transfer contact to the list, select Menu > Settings > Connectivity > Data transfer > Options >

Use Bluetooth to connect your compatible PC to the internet without PC Suite software. Your phone must have activated a service provider that supports internet access, and your PC has to support Bluetooth personal area network (PAN). After connecting to the network access point (NAP) service of the phone and pairing with your PC, your phone automatically opens a packet data connection to the internet.
Add contact > Phone sync or Phone copy, and enter the settings according to the transfer type. To edit or delete a transfer contact selectOptions. Data transfer with a compatible device
Printing & media to use the phone with a PictBridge compatible printer or with a compatible PC Data storage to connect to a PC that does not have Nokia software and use the phone as a data storage device To change the USB mode, select Menu > Settings > Connectivity > USB data cable and the desired USB mode.
To connect use Bluetooth wireless technology or a cable connection. The other device must be activated for receiving data. To start data transfer, select Menu > Settings > Connectivity > Data transfer and the transfer contact from the list other than Server sync or PC sync. Synchronize from a server To use a remote internet server, subscribe to a synchronization service. For more information and the settings required for this service, contact your service provider. You may receive the settings as a configuration message. See "Configuration setting service," p. 8. To start the synchronization from your phone, select Menu > Settings > Connectivity > Data transfer > Server sync. Synchronizing for the first time or after an interrupted synchronization may take up to 30 minutes to complete.

Nokia PC Suite

With Nokia PC Suite you can manage your music, synchronize contacts, calendar, notes, and to-do notes between your phone and the compatible PC or a remote internet server (network service). You may find more information and PC Suite on the Nokia website. See "Nokia support," p. 9.

USB data cable

Security

Configuration
You can configure your phone with settings that are required for certain services. Your service provider may also send you these settings. See "Configuration setting service," p. 8.
switched on. Some SIM cards do not allow the code request to be turned off. PIN2 code request to select whether the PIN2 code is required when using a specific phone feature which is protected by the PIN2 code. Some SIM cards do not allow the code request to be turned off. Call barring service to restrict incoming calls to and outgoing calls from your phone (network service). A barring password is required. Fixed dialling to restrict your outgoing calls to selected phone numbers if supported by your SIM card. When the fixed dialing is on, GPRS connections are not possible except while sending text messages over a GPRS connection. In this case, the recipients phone number and the message center number must be included in the fixed dialing list. Closed user group to specify a group of people whom you can call and who can call you (network service) Security level Select Phone to request the security code whenever a new SIM card is inserted into the phone. Select Memory, to request the security code
when the SIM card memory is selected, and you want to change the memory in use. Access codes to change the security code, PIN code, UPIN code, PIN2 code, or barring password Code in use to select whether the PIN code or UPIN code should be active Authority certificates or User certificates to view the list of the authority or user certificates downloaded into your phone. See "Certificates," p. 41. Security module settings to view Security module details, activate Module PIN request, or change the module PIN and signing PIN. See "Access codes," p. 7.

Restore factory settings

To reset some of the menu settings to their original values, select Menu > Settings > Restore factory sett. Enter the security code. The names and phone numbers saved in Contacts are not deleted.

Operator menu Gallery

Access a portal to services provided by your network operator. For more information contact your network
operator. The operator can update this menu with a service message. See "Service inbox," p. 41.
Manage images, video clips, music files, themes, graphics, tones, recordings, and received files. These files are stored in the phone memory or an attached memory card and may be arranged in folders.
Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded.
Your phone supports an activation key system to protect acquired content. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee.
To insert and remove a memory card see "Insert a microSD card", p. 10. Format the memory card Some supplied memory cards are preformatted; others require formatting. When you format a memory card, all data on the card is permanently lost. 1. To format a memory card, select Menu > Gallery or 2. When formatting is complete, enter a name for the memory card. Lock the memory card Set a password (maximum 8 characters) to lock your memory card against unauthorized use. Select the memory card folder password. Applications, the memory card folder Options > Format mem. card > Yes. , and

Folders and files

To view the list of folders, select Menu > Gallery. To view the list of files in a folder, select a folder and Open. To view the folders of the memory card when moving a file, scroll to the memory card, and press the scroll key right.

Print images

Your phone supports Nokia XPressPrint to print images that are in the jpeg format. 1. To connect your phone to a compatible printer, use a data cable or send the image by Bluetooth to a printer supporting Bluetooth technology. See "Bluetooth wireless technology," p. 26. 2. Select the image you want to print and Options > Print.

and Options > Set

Memory card
Use a memory card to store your multimedia files such as video clips, music tracks, sound files, images, and messaging data. Warning: Keep all memory cards out of the reach of small children. Some of the folders in Gallery with content that the phone uses (for example, Themes) may be stored on the memory card.

To skip to the next track, select. To skip to the twice. beginning of the previous track, select

Music player

To fast forward the current track, select and hold. To. Release the rewind the current track, select and hold key at the position you want. To stop the music player, press and hold the end key.
Your phone includes a music player for listening to music tracks or other MP3 or AAC sound files that you have downloaded from the web or transferred to the phone with Nokia PC Suite. See "Nokia PC Suite," p. 28. Music files stored in the music folder in the phone memory or on the memory card are automatically detected and added to the music library during the startup of the phone. To open the music player, select Menu > Media > Music player.

Music player options

Play music tracks
Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. To adjust the volume level, use the volume keys of the device. Operate the music player with the virtual keys on the display.
To pause the playing, select
When you open Music player, the details of the first track on the default track list are shown. To start playing, select.
In the music player menu, select from the following options: Show tracks View all available tracks of the active track list and play the desired track. To play a track, scroll to the desired track, and select Play. Music library View all available tracks ordered by catagories. Select Update libr. to refresh the lists. To find track lists generated with the Nokia Music Manager, select Track lists > My tracks. Play options Select Random to play the tracks on the track list in random order. Select Repeat to play the current track or the entire track list repeatedly. Media equaliser to select or define an equalizer setting Add to Favourites to add the current track to the favorite track list Play via Bluetooth to connect and play the tracks on an audio accessory using Bluetooth technology Use tone Set the currently played music track, for example, as a ringing tone. Send to send the current track by a multimedia message or using Bluetooth technology Web page to access a web page associated with the currently played track, which is dimmed if no web page is available.
Music downloads to connect to a web service Memory status to view the free and used memory capacity
The FM radio depends on an antenna other than the wireless device antenna. A compatible headset or enhancement needs to be attached to the device for the FM radio to function properly. Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. To adjust the volume, press the volume keys. Select Menu > Media > Radio.

Select Options and from the following. Search all stations to automatically search the available stations at your location Set frequency to enter the frequency of the desired radio station Station directory to access a website with a list of radio stations Save station to save the currently tuned in station Stations to list and rename or delete saved stations Change stations Select or
, or press the corresponding number keys.

Voice recorder

, , , or on the display, To use the graphical keys scroll left or right to the desired key, and select it.
Record speech, sound, or an active call, and save them in Gallery. Select Menu > Media > Recorder. To use the graphical , , or on the display, scroll left or right. keys Record sound , or during a call, select Options > Record. 1. Select While recording a call, all parties to the call hear a faint. beeping. To pause the recording, select
Tune in to radio stations
Search and save stations or. To change 1. To start the search, select and hold the radio frequency in 0.05 MHz steps, briefly press or. 2. To save a station to a memory location, 1 to 9, press and hold the corresponding number key. To save a station to a memory location from 10 to 20, press briefly 1 or 2, and press and hold the desired number key, 0 to 9. 3. Enter the name of the radio station.
2. To end the recording, select in Gallery > Recordings.

. The recording is saved

Select Options to play or send the last recording, to access the list of recordings and to select the memory and the folder to store the recordings.

Equalizer

Adjust the sound when using the music player.
Select Menu > Media > Equaliser. To activate a predefined set, scroll to one of the equalizer sets and select Activate. Create a personal equalizer set
3. Select Save and Options > Rename to save the settings with a name.
1. Select one of the last two sets in the list and Options > Edit. 2. Scroll left or right to access the virtual sliders and up or down to adjust the slider.

Stereo widening

Stereo widening creates a wider stereo sound effect when you are using a stereo headset. To activate, select Menu > Media > Stereo widening.

Push to talk

Push to talk (PTT) is a two-way radio service available over a GPRS cellular network (network service). You can use PTT to have a conversation with one person or with a group of people (channel) having compatible phones. While you are connected to the PTT service, you can use the other functions of the phone. To check availability, costs, additional features and to subscribe to the service, contact your service provider.
Roaming services may be more limited than for normal calls. This feature may not be available, depending on your phone. For more information about signing up for the PTT services and the usage, contact your service provider. To connect to the PTT service, select Menu > Push to talk > Switch PTT on.

Organizer

Alarm clock
To sound an alarm at a desired time. Set the alarm
1. Select Menu > Organiser > Alarm clock. 2. To set the alarm on and to enter the alarm time select Alarm time. 3. To issue an alarm on selected days of the week, select Repeat alarm > On and the days.
4. Select the alarm tone. If you select the radio as an alarm tone, connect the headset to the phone. 5. Set the snooze time-out and select Back. Stop the alarm
If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not
select Yes when wireless device use may cause interference or danger. To stop the alarm, select Stop. If you let the phone continue to sound the alarm for a minute or select Snooze, the alarm stops for the snooze time-out, then resumes.
To make a note if no note is added, select Add note; otherwise, select Options > Add. Fill in the fields, and select Save.
To view a note, scroll to it, and select View. Select Options to edit the attributes, to delete the selected note and all notes that you have marked as done.

Calendar

Select Menu > Organiser > Calendar. The current day has a frame around the number. If there are any notes set for the day, the day is in bold type. To view the day notes, select View. To view a week, select Options > Week view. To delete all notes in the calendar, select the month or week view, and Options > Delete all notes. Select Options > Settings to set the date, time, time zone, date or time format, date separator, default view, or the first day of the week. Select Options > Auto-delete notes to delete old notes automatically after a specified time. Make a calendar note
To write and send notes, select Menu > Organiser > Notes. To make a note if no note is added, select Add note; otherwise, select Options > Make a note. Write the note, and select Save. The calculator in your device provides basic arithmetic and some scientific functions. Note: This calculator has limited accuracy and is designed for simple calculations. Calculations

Calculator

Scroll to the date, and select Options > Make a note and Reminder, one of the following note types: Meeting, Call, Birthday, or Memo. Fill in the fields.

To-do list

To save a note for a task that you must do, select Menu > Organiser > To-do list.
1. Select Menu > Organiser > Calculator. 2. When 0 is displayed on the screen, enter the first number in the calculation. Press # for a decimal point. Scroll to the desired operation or function, and enter the second number. Repeat this sequence as many times as it is necessary. Currency conversion 1. To perform a currency conversion select Options > Exchange rate.
2. Select either of the displayed options. Enter the exchange rate, press # for a decimal point, and select OK. The exchange rate remains in the memory until you replace it with another one. 3. To perform the currency conversion, enter the amount to be converted, and select Options > In domestic or In foreign. Note: When you change the base currency, you must enter new exchange rates because all previously set exchange rates are cleared.
2. Select Menu > Organiser > Timer > Interval timer. 3. To start the timer, select Start timer > Start.

Stopwatch

Timers

Countdown timer

1. To activate the countdown timer, select Menu > Organiser > Timer > Normal timer, enter the alarm time, and write a note that is displayed when the time expires. To change the countdown time, select Change time. 2. To start the timer, select Start. 3. To stop the timer, select Stop timer. Interval timer 1. To have an interval timer with up to 10 intervals started, first enter the intervals.
You can measure time, take intermediate times, or take lap times using the stopwatch. Select Menu > Organiser > Stopwatch and from the following options: Split timing to take intermediate times. To reset the time without saving it, select Options > Reset. Lap timing to take lap times Continue to view the timing that you have set in the background Show last to view the most recently measured time if the stopwatch is not reset View times or Delete times to view or delete the saved times To set the stopwatch timing in the background, press the end key.

Applications

You can manage applications and games. Your phone may have some games or applications installed. These files are stored in the phone memory or an attached memory card
and may be arranged in folders. See "Memory card," p. 32.

Hearing aids

Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.
Potentially explosive environments

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer, or its representative, of your vehicle or any equipment that has been added. Only qualified personnel should service the device or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal.
Switch off your device when in any area with a potentially explosive atmosphere, and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refuelling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include below deck on boats, chemical transfer or storage facilities and areas where the air contains chemicals or particles such as grain, dust, or metal powders. You should check with the manufacturers of vehicles using liquefied petroleum gas (such as propane or butane) to determine if this device can be safely used in their vicinity.

limitation, defects caused by sharp items, by bending, compressing or dropping, etc.), d) defects or damage caused by misuse of the Product, including use that is contrary to the instructions provided by Nokia (e.g. as set out in the Product's user guide) and/or e) other acts beyond the reasonable control of Nokia. 3. This Limited Warranty does not cover defects or alleged defects caused by the fact that the Product was used with, or connected to, a product, accessories, software and/or service not manufactured, supplied or authorized by Nokia or was used otherwise than for its intended use. Defects can be caused by viruses from your or from a third party's unauthorised access to services, other accounts, computer systems or networks. This unauthorised access can take place through hacking, password-mining or through a variety of other means. 4. This Limited Warranty does not cover defects caused by the fact that the battery has been short-circuited or by the fact that the seals of the battery enclosure or the cells are broken or show evidence of tampering or by the fact that the battery has been used in equipment other than those for which it has been specified. 5. This Limited Warranty does not apply if the Product has been opened, modified or repaired by anyone other than an authorized service centre, if it is repaired using unauthorised spare parts or if the Products serial number, the mobile accessory date code or the IMEI number has been removed, erased, defaced, altered or are illegible in any way and this shall be determined in the sole discretion of Nokia. 6. This Limited Warranty does not apply if the Product has been exposed to moisture, to dampness or to extreme thermal or environmental conditions or to rapid changes
in such conditions, to corrosion, to oxidation, to spillage of food or liquid or to influence from chemical products.

Other important notices

A third party, independent operator provides the SIM card and cellular and/or other network or system on which the Product operates. Therefore, Nokia will not accept responsibility under this warranty for the operation, availability, coverage, services or range of the cellular or other network or system. Before the Product can be repaired or replaced, the operator may need to unlock any SIM-lock or other lock that may have been added to lock the product to a specific network or operator. Accordingly, Nokia does not accept responsibility for any delays in warranty repairs or for the inability of Nokia to complete warranty repairs that are caused by the operator's delay or failure to unlock any SIM-lock or other lock. Please remember to make backup copies or keep written records of all important content and data stored in your Product, because content and data may be lost during repair or replacement of the Product. Nokia, in a manner consistent with the provisions of the section entitled Limitation of Nokia's Liability below, to the extent permitted by applicable law(s), shall not under any circumstances be liable, either expressly or implied, for any damages or losses of any kind whatsoever resulting from loss of, damage to, or corruption of, content or data during repair or replacement of the Product. All parts of the Product or other equipment that Nokia has replaced shall become the property of Nokia. If the returned Product is found not to be covered by the terms and conditions of the Limited Warranty, Nokia and its authorized service companies reserve the right to charge a handling fee. When repairing or replacing the Product,

Network services

To use the phone you must have service from a wireless service provider. Many of the features require special network features. These features are not available on all networks; other networks may require that you make specific arrangements with your service provider before you can use the network services. Your service provider can give you instructions and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services. Your service provider may have requested that certain features be disabled or not activated in your device. If so, these features will not appear on your device menu. Your device may also have a special configuration such as changes in menu names, menu order, and icons. Contact your service provider for more information. Practical rules about accessories and enhancements Keep all accessories and enhancements out of the reach of small children. When you disconnect the power cord of any accessory or enhancement, grasp and pull the plug, not the cord. Check regularly that enhancements installed in a vehicle are mounted and are operating properly.

Enhancements

Installation of any complex car enhancements must be made by qualified personnel only.

General information

To set how your phone uses the access codes and security settings, select Menu > Settings > Security. The security code helps to protect your phone against unauthorized use. The preset code is 12345. You can change the code, and set the phone to request the code. The PIN (UPIN) code, supplied with the SIM (USIM) card, helps to protect the card against unauthorized use. The PIN2 (UPIN2) code, supplied with some SIM (USIM) cards, is required to access certain services. PUK (UPUK) and PUK2 (UPUK2) codes may be supplied with the SIM (USIM) card. If you enter the PIN code incorrectly three times in succession, you are asked for the PUK code. If the codes are not supplied, contact your service provider. The barring password is required when using the Call barring service to restrict incoming calls to and outgoing calls from your phone (network service). To view or change the security module settings, select Menu > Settings > Security > Security module settings.

Access codes

Configuration setting service
To use some of the network services, such as mobile internet services, MMS, Nokia Xpress audio messaging, or remote internet server synchronization, your phone needs the correct configuration settings. For more information on availability, contact your service provider or the nearest authorized Nokia dealer, or visit the support area on the Nokia website. See "Nokia support," p. 10. When you have received the settings as a configuration message and the settings are not automatically saved and activated, Configuration sett. received is displayed. To save the settings, select Show > Save. If required, enter the PIN code supplied by the service provider.

Nokia. All rights reserved.
DRM protected content comes with an associated activation key that defines your rights to use the content. To back up OMA DRM protected content, use the backup feature of Nokia PC Suite. If your device has WMDRM protected content, both the activation keys and the content will be lost if the device memory is formatted. You may also lose the activation keys and the content in case the files on your device get corrupted. Losing the activation keys or the content may limit your ability to use the same content on your device again. For more information, contact your service provider.

Get started

2. Get started
Always switch the device off and disconnect the charger before removing the battery. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider or other vendor. This device is intended for use with a BL-4C battery. Always use original Nokia batteries. See "Nokia battery authentication guidelines," p. 49. The SIM card and its contacts can be easily damaged by scratches or bending, so be careful when handling, inserting, or removing the card. 1. Push the release button (1) to unlock and remove the back cover (2). Remove the battery as shown (3). 2. Open the SIM card holder (4). Insert the SIM card (5) with the contact surface facing down into the holder. Close the SIM card holder (6).
Install SIM card and battery
3. Observe the battery contacts (7), and insert the battery (8). Place the upper part of the back cover on the device (9), and close it (10).

Insert a microSD card

Use only compatible microSD cards approved by Nokia for use with this device. Nokia uses approved industry standards for memory cards, but some brands may not be fully compatible with this device. Incompatible cards may damage the card and the device and corrupt data stored on the card.
1. Switch the phone off, and remove the back cover and the battery of the phone. 2. Slide the memory card holder to unlock (1). 3. Open the card holder (2), and insert the memory card into the card holder with the contact surface facing inwards (3). 4. Close the card holder (4), and slide the card holder to lock it (5). 5. Insert the battery, and attach the back cover to the phone.

Charge the battery

Check the model number of any charger before use with this device. This device is intended for use when supplied with power from the AC-3 or AC-4 charger. Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord. 1. Connect the charger to a wall socket.

Standby mode

Display
When the phone is ready for use, and you have not entered any characters, the phone is in the standby mode.
Signal strength of the cellular network Battery charge status Indicators Name of the network or the operator logo Clock Display Function of the left selection key Function of the Navi key Function of the right selection key
You may change the function of the left and right selection key. See "Left and right selection key," p. 29.

Power saving

Your phone has a Power saver and a Sleep mode feature in order to save battery power in the standby mode when no keys are pressed. These features may be activated. See "Display," p. 28. The active standby mode displays a list of selected phone features and information that you can directly access.

Active standby

To switch active standby on or off, select Menu > Settings > Display > Active standby > Active standby mode.
In the standby mode, scroll up or down to navigate in the list, and choose Select or View. The arrows indicate that further information is available. To stop navigation, select Exit. To organize and change the active standby mode, select Options.
Shortcuts in the standby mode
To access the list of dialed numbers, press the call key once. Scroll to the number or name, and press the call key to call the number. To open the web browser, press and hold 0. To call your voice mailbox, press and hold 1.
Use keys as a shortcut. See "Dialing shortcuts," p. 18.

Indicators

unsent, canceled, or failed messages missed call The keypad is locked.

unread messages

The phone does not ring for an incoming call or text message. The alarm clock is activated. / / / The phone is registered to the GPRS or EGPRS network. A GPRS or EGPRS connection is established. The GPRS or EGPRS connection is suspended (on hold).
If you have two phone lines, the second phone line is selected. All incoming calls are diverted to another number. Calls are limited to a closed user group. The timed profile is selected.
A Bluetooth connection is active.

Flight mode

The character cases are indicated by , , and. To change the character case, , press and hold press #. To change from the letter to number mode, indicated by #, and select Number mode. To change from the number to the letter mode, press and hold #. To set the writing language, select Options > Writing language.

Traditional text input

Press a number key, 2 to 9, repeatedly until the desired character appears. The available characters depend on the selected writing language.
If the next letter you want is located on the same key as the present one, wait until the cursor appears and enter the letter. To access the most common punctuation marks and special characters, repeatedly press the number key 1 or press * to select a special character.

Predictive text input

Predictive text input is based on a built-in dictionary to which you can also add new words. 1. Start writing a word, using the keys 2 to 9. Press each key only once for one letter. 2. To confirm a word by adding a space, press 0. If the word is not correct, press * repeatedly, and select the word from the list.

Navigate the menus

If the ? character is displayed after the word, the word you intended to write is not in the dictionary. To add the word to the dictionary, select Spell. Enter the word using traditional text input, and select Save. To write compound words, enter the first part of the word, and press the scroll key right to confirm it. Write the last part of the word, and confirm the word. 3. Start writing the next word.
The phone offers you an extensive range of functions that are grouped into menus. 1. To access the menu, select Menu. 2. Scroll through the menu, and select an option (for example, Settings). 3. If the selected menu contains further submenus, select one (for example, Call). 4. If the selected menu contains further submenus, repeat step 3. 5. Select the setting of your choice. 6. To return to the previous menu level, select Back. To exit the menu, select Exit. To rearrange the menu, scroll to the menu to be moved, and select Options > Organise > Move. Scroll to where you want to move the menu, and select OK. To save the change, select Done > Yes. To change the menu view, select Options > Main menu view > List or Grid.

You can save names, phone numbers as contacts in the phone memory and on the SIM card memory and search and recall them to make a phone call or to create a message.

Manage contacts

To save a name and phone number, select Menu > Contacts > Names > Options > Add new contact. Add and edit details The first number you save is automatically set as the default number and is indicated ). When you select a with a frame around the number type indicator (for example,
1. Select Menu > Contacts > Settings > Memory in use to select the SIM card, the phone memory, or both for your contacts. 2. Select Phone and SIM to recall contacts from both memories. When you save contacts, they will be saved in the phone memory. Save names and numbers
The phone memory can save contacts with additional details, such as various phone numbers and text items. You can also save an image, a tone, or a video clip for a limited number of contacts. The SIM card memory can save names with one phone number attached to them. The. contacts saved in the SIM card memory are indicated by
Select the memory for contacts
name from contacts (for example, to make a call), the default number is used unless you select another number. Search for the contact to add a detail, and select Details > Options > Add detail and from the available options. Search for a contact
1. Select the first contact to copy or move and Options > Mark. 2. Mark the other contacts, and select Options > Copy marked or Move marked. Copy or move all contacts between SIM card and phone memory Select Menu > Contacts > Copy contacts or Move contacts. Delete contacts
1. Select Menu > Contacts > Names. 2. Select the contact to copy or move and Options > Copy contact or Move contact. Copy or move several contacts between SIM card and phone memory
Select Menu > Contacts > Names and scroll through the list of contacts, or enter the first characters of the name to search. Copy or move a contact between SIM card and phone memory
Arrange contacts into caller groups with different ringing tones and group images. 1. Select Menu > Contacts > Groups. 2. Select Add or Options > Add new group to create a new group. 3. Enter the group name, optionally select an image and a ringing tone and select Save. 4. Select the group and View > Add to add contacts to the group.
Search for the desired contact, and select Options > Delete contact. To delete all the contacts and the details attached to them from the phone or SIM card memory, select Menu > Contacts > Delete all contacts > From phone mem. or From SIM card. To delete a number, text item, or an image attached to the contact, search for the contact, and select Details. Scroll to the desired detail, and select Options > Delete and from the available options. Create a contact group

Business cards

You can send and receive a persons contact information from a compatible device that supports the vCard standard.
To send a business card, search for the contact, and select Details > Options > Send bus. card.
When you receive a business card, select Show > Save to save the business card in the phone memory. Assign phone numbers to the number keys 29 as a shortcut. 1. Select Menu > Contacts > Speed dials, and scroll to a number key. 2. Select Assign, or if a number has already been assigned to the key, select Options > Change. 3. Enter a number or search for a contact.

Call log

Assign dialing shortcuts
To view the information on your calls, select Menu > Log. Call log to view your recently missed and received calls and dialed numbers chronologically Missed calls, Received calls, or Dialled numbers for information about your recent calls Message recipients to view the contacts to whom you most recently sent messages Call duration, Packet data counter, or Packet data conn. timer to view the general information on your recent communications Message log to view the number of sent and received messages Note: The actual invoice for calls and services from your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth. Note: Some timers may be reset during service or software upgrades.

8. Call log

9. Positioning
The network may send you a position request (network service). Contact your service provider to subscribe and to agree upon the delivery of positioning information. To accept or reject the position request, select Accept or Reject. If you miss the request, the phone automatically accepts or rejects it according to what you have agreed with your network operator or service provider.
To view the information on the 10 most recent privacy notifications and requests or to delete them, select Menu > Log > Positioning > Position log > Open folder or Delete all.

Settings

10. Settings

Profiles

Your phone has various setting groups called profiles, which you can customize with ringing tones for different events and environments. Select Menu > Settings > Profiles, the desired profile, and from the following options: Activate to activate the selected profile Personalise to change the profile settings Timed to set the profile to be active until an end time. When the time set for the profile expires, the previous profile that was not timed becomes active.

Themes

A theme contains elements for personalizing your phone. Select Menu > Settings > Themes and from the following options: Select theme Open the Themes folder, and select a theme. Theme downloads Open a list of links to download more themes. You can change the tone settings of the selected active profile. Select Menu > Settings > Tones. You can find the same settings in the Profiles menu. If you select the highest ringing tone level, the ringing tone reaches its highest level after a few seconds.

2007 Nokia. All rights reserved. 29

Voice commands

Edit or Remove to rename or deactivate the voice command Add all or Remove all to activate or deactivate voice commands for all functions in the voice commands list

Connectivity

Your phone provides several features to connect to other devices to transmit and receive data. Bluetooth technology allows you to connect your phone using radio waves to a compatible Bluetooth device within 10 meters (32 feet). This device is compliant with Bluetooth Specification 2.0 + EDR supporting the following profiles: generic access, network access, generic object exchange, advanced audio distribution, audio video remote control, hands-free, headset, object push, file transfer, dial-up networking, SIM access, and serial port. To ensure interoperability between other devices supporting Bluetooth technology, use Nokia approved enhancements for this model. Check with the manufacturers of other devices to determine their compatibility with this device. There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider. Setup a Bluetooth connection Select Menu > Settings > Connectivity > Bluetooth and take the following steps: 1. Select My phone's name and enter a name for your phone.
Bluetooth wireless technology
indicates that 2. To activate Bluetooth connectivity select Bluetooth > On. Bluetooth is active. 3. To connect your phone with an audio enhancement, select Search for audio enhancements and the device that you want to connect. 4. To connect your phone with any Bluetooth device in range, select Paired devices > New. Select a device and Pair. Enter a passcode (up to 16 characters) on your phone and allow the connection on the other Bluetooth device. If you are concerned about security, turn off the Bluetooth function, or set My phone's visibility to Hidden. Always accept only Bluetooth communication from others whom you trust. PC connection to the internet
Use Bluetooth to connect your compatible PC to the internet without PC Suite software. Your phone must have activated a service provider that supports internet access, and your PC has to support Bluetooth personal area network (PAN). After connecting to the
network access point (NAP) service of the phone and pairing with your PC, your phone automatically opens a packet data connection to the internet.
General packet radio service (GPRS) is a network service that allows mobile phones to send and receive data over an internet protocol (IP)-based network. To define how to use the service, select Menu > Settings > Connectivity > Packet data > Packet data connection and from the following options: When needed to set the packet data connection to established when an application needs it. The connection will be closed when the application is terminated. Always online to automatically connect to a packet data network when you switch the phone on You can connect a compatible PC to the phone by Bluetooth or USB data cable and use the phone as a modem. For details refer to Nokia PC Suite. See "Nokia support," p. 10.

Packet data

Data transfer
Synchronize your calendar, contacts data, and notes with another compatible device, a compatible PC, or a remote internet server (network service). Transfer contact list To copy or synchronize data from your phone, the name of the phone and the settings must be in the list of transfer contacts. If you receive data from another device, the corresponding transfer contact is automatically added to the list, using the contact data from the other device. Server sync and PC sync are the original items in the list.
To edit or delete a transfer contact, select Options. Data transfer with a compatible device
To add a new transfer contact to the list, select Menu > Settings > Connectivity > Data transfer > Options > Add contact > Phone sync or Phone copy, and enter the settings according to the transfer type.
To start data transfer, select Menu > Settings > Connectivity > Data transfer and the transfer contact from the list other than Server sync or PC sync. Synchronize from a server To use a remote internet server, subscribe to a synchronization service. For more information and the settings required for this service, contact your service provider. You may receive the settings as a configuration message. See "Configuration setting service," p. 9.
2007 Nokia. All rights reserved. 31
To connect use Bluetooth wireless technology or a cable connection. The other device must be activated for receiving data.
To start the synchronization from your phone, select Menu > Settings > Connectivity > Data transfer > Server sync. Synchronizing for the first time or after an interrupted synchronization may take up to 30 minutes to complete.

USB data cable

To change the USB mode, select Menu > Settings > Connectivity > USB data cable and the desired USB mode.
You can use the USB data cable to transfer data between the phone and a compatible PC or a printer supporting PictBridge. To activate the phone for data transfer or image printing, connect the data cable, and select the mode: Nokia mode to use the cable for PC Suite Printing & media to use the phone with a PictBridge compatible printer or with a compatible PC Data storage to connect to a PC that does not have Nokia software and use the phone as a data storage device

Nokia PC Suite

With Nokia PC Suite you can manage your music, synchronize contacts, calendar, notes, and to-do notes between your phone and the compatible PC or a remote internet server (network service). You may find more information and PC Suite on the Nokia website. See "Nokia support," p. 10. Select Menu > Settings > Call and from the following options: Call divert to divert your incoming calls (network service). You may not be able to divert your calls if some call barring functions are active. See "Security," p. 34. Voice clarity to enhance speech intelligibility, especially in noisy environments Anykey answer to answer an incoming call by briefly pressing any key, except the power key, the left and right selection keys, or the end key Automatic redial to make a maximum of 10 attempts to connect the call after an unsuccessful call attempt Speed dialling to dial the names and phone numbers assigned to the number keys 2 to 9 by pressing and holding the corresponding number key Call waiting to have the network notify you of an incoming call while you have a call in progress (network service) Summary after call to briefly display the approximate duration after each call Send my caller ID to show your phone number to the person you are calling (network service). To use the setting agreed upon with your service provider, select Set by network.

1. Select Menu > Settings > Phone > Phone updates to request available software updates from your service provider. 2. Select Current software details to display the current software version and check whether an update is needed.
3. Select Download phone software to download and install a software update. Follow the instructions on the display. 4. If the installation was canceled after the download, select Install software update to start the installation. The software update may take several minutes. If there are problems with the installation, contact your service provider. This menu or the following options are shown only if the phone is or has been connected to a compatible mobile enhancement. Select Menu > Settings > Enhancements. Select an enhancement, and an option depending on the enhancement. You can configure your phone with settings that are required for certain services. Your service provider may also send you these settings. See "Configuration setting service," p. 9. Select Menu > Settings > Configuration and from the following options: Default configuration settings to view the service providers saved in the phone and set a default service provider Activate default in all applications to activate the default configuration settings for supported applications Preferred access point to view the saved access points Connect to service provider support to download the configuration settings from your service provider Device manager settings to allow or prevent the phone from receiving software updates. This option may not be available, depending on your phone. See "Software updates over the air," p. 33. Personal configuration settings to manually add new personal accounts for various services and to activate or delete them. To add a new personal account, select Add new, or Options > Add new. Select the service type, and enter the required parameters. To activate a personal account, scroll to it, and select Options > Activate. When security features that restrict calls are in use (such as call barring, closed user group, and fixed dialling), calls may be possible to the official emergency number programmed into your device. Select Menu > Settings > Security and from the following options:

2007 Nokia. All rights reserved. 43

Launch an application

Update version to verify that a new version of the application is available for download from the web (network service) Web page to provide further information or additional data for the application from an internet page (network service), if available App. access to restrict the application from accessing the network

Download an application

Your phone supports J2ME Java applications. Ensure that the application is compatible with your phone before downloading it. Important: Only install and use applications and other software from trusted sources, such as applications that are Symbian Signed or have passed the Java VerifiedTM testing. You can download new applications and games in different ways. Select Menu > Applications > Options > Downloads > App. downloads or Game downloads; the list of available bookmarks is shown. Use the Nokia Application Installer from PC Suite to download the applications to your phone. For the availability of different services and pricing, contact your service provider. Your device may have some bookmarks or links preinstalled for or may allow access to sites provided by third parties not affiliated with Nokia. Nokia does not endorse or assume any liability for these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any internet site.
You can access various mobile internet services with your phone browser. Appearance may vary due to screen size. You may not be able to view all details of the internet pages. Important: Use only services that you trust and that offer adequate security and protection against harmful software. Check the availability of these services, pricing, and instructions with your service provider. You may receive the configuration settings required for browsing as a configuration message from the service provider. See "Configuration setting service," p. 9. To set a service, select Menu > Web > Settings > Configuration settings, and select a configuration and an account.

17. Web

To make a connection to the service, select Menu > Web > Home; or in the standby mode, press and hold 0. To select a bookmark, select Menu > Web > Bookmarks. Your device may have some bookmarks or links preinstalled for or may allow access to sites provided by third parties not affiliated with Nokia. Nokia does not endorse or assume any liability for these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any internet site. To select the last URL, select Menu > Web > Last web address.

Connect to a service

To enter an address of a service, select Menu > Web > Go to address. Enter the address, and select OK. After you make a connection to the service, you can start browsing its pages. The function of the phone keys may vary in different services. Follow the text guides on the phone display. For more information, contact your service provider. While browsing, select Options > Other options > Appear. settings; or in the standby mode, select Menu > Web > Settings > Appearance settings. Available options may include the following: Text wrapping to select how the text is displayed Alerts Select Alert for unsecure connection > Yes to alert when a secure connection changes to an unsecure connection while browsing. Alerts Select Alert for unsecure items > Yes to alert when a secure page contains an unsecure item. These alerts do not guarantee a secure connection. See "Browser security," p. 46. Character encoding Select Content encoding to set the encoding for the browser page content.

Appearance settings

Security settings

Cache memory

A cache is a memory location that is used to store data temporarily, such as passwords and cookies. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. A cookie is data that a site saves in the cache memory of your phone. Cookies are saved until you clear the cache memory.
To clear the cache while browsing, select Options > Other options > Clear the cache. To allow or prevent the phone from receiving cookies, while browsing select Options > Other options > Security > Cookie settings; or in the standby mode select Menu > Web > Settings > Security settings > Cookies.
You can select whether to run scripts from a secure page. The phone supports WML scripts. While browsing, to allow the scripts, select Options > Other options > Security > WMLScript sett.; or in the standby mode, select Menu > Web > Settings > Security settings > WMLScripts over secure connection > Allow.
Scripts over secure connection

Service inbox

The phone is able to receive service messages sent by your service provider (network service). Service messages are notifications (for example, news headlines) that may contain a text message or an address of a service. Select Show to access the Service inbox when you receive a service message. If you select Exit, the message is moved to the Service inbox.

To access the Service inbox later, select Menu > Web > Service inbox. To access the Service inbox while browsing, select Options > Other options > Service inbox. To activate the browser and download the complete message, select the message and Retrieve. To change the service inbox settings, select Menu > Web > Settings > Service inbox settings and from the following options: Service messages to set whether you want to receive service messages Message filter Select On to receive service messages only from content authors approved by the service provider. Automatic connection Select On to automatically activate the browser from the standby mode, when the phone has received a service message. If you select Off, the phone activates the browser only after you select Retrieve when the phone has received a service message. Security features may be required for some services, such as online banking or shopping. For such connections you need security certificates and possibly a security module, which may be available on your SIM card. For more information, contact your service provider. To view or change the security module settings, select Menu > Settings > Security > Security module settings.

Browser security

Certificates
Important: Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or

is encrypted,

trusted certificates for increased security to be available. Certificates have a restricted lifetime. If "Expired certificate" or "Certificate not valid yet" is shown, even if the certificate should be valid, check that the current date and time in your device are correct. There are three kinds of certificates: server certificates, authority certificates, and user certificates. You may receive these certificates from your service provider. Authority certificates and user certificates may also be saved in the security module by your service provider. To view the list of the authority or user certificates downloaded to your phone, select Menu > Settings > Security > Authority certificates or User certificates. During a connection if the data transmission between the phone and the content server The security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server. is displayed.

SIM services

Digital signature
You can create digital signatures with your phone if your SIM card has a security module. The digital signature is the same as signing your name to a paper bill, contract, or other document. To create a digital signature, select a link on a page, for example, the title of the book you want to buy and its price. The text to be signed is shown and may include the amount and date.
is shown. If Check that the header text is Read and that the digital signature icon the digital signature icon does not appear, there is a security breach; do not enter any personal data (such as your signing PIN). To sign the text, read all of the text first, and select Sign. The text may not fit within a single screen. Therefore, make sure to scroll through and read all of the text before signing.
Select the user certificate you want to use, and enter the signing PIN. The digital signature icon disappears, and the service may display a confirmation of your purchase.

18. SIM services

Your SIM card may provide additional services. You can access this menu only if it is supported by your SIM card. The name and contents of the menu depend on the available services. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider or other vendor.
2007 Nokia. All rights reserved. 47
To show the confirmation messages sent between your phone and the network when you are using the SIM services, select Menu > Settings > Phone > Confirm SIM service actions Accessing these services may involve sending messages or making a phone call for which you may be charged.

Battery information

19. Battery information

Charging and discharging

Your device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device. If a replacement battery is being used for the first time or if the battery has not been used for a prolonged period, it may be necessary to connect the charger, then disconnect and reconnect it to begin charging the battery. Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time. If the battery is completely discharged, it may take several minutes before the charging indicator appears on the display or before any calls can be made. Use the battery only for its intended purpose. Never use any charger or battery that is damaged. Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object. Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15C and 25C (59F and 77F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing. Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste. Do not dismantle or shred cells or batteries. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. In the event of such a leak, flush your skin or eyes immediately with water, or seek medical help.