Adjusting camera settings
1 Select Options Settings Image. 2 Scroll to the setting you want to change: Image quality - High, Normal, and Basic. The better the image quality, the more memory the image consumes. The resolution of a zoomed picture is lower than that of a non-zoomed picture, but the image remains the same size. You may notice the difference in image quality if viewed on a PC, for example. If you are going to print the image, select High or Normal image quality. Show captured image - Select Yes if you want to see the captured image after it has been taken or No if you want to continue taking pictures immediately. Image resolution - Select the resolution you want to use for the images you are going to take. Default image name - Set a default name for the images you are going to take. You can replace date with your own text (for example, Holiday_2004). Memory in use - Select where to store your images. Glossary: Resolution is a measure of sharpness and clarity of an image. Resolution refers to the number of pixels in an image. The more pixels, the more detailed the picture is, and the more memory it consumes.
R0915_en.book Page 35 Tuesday, February 8, 2005 11:46 AM
Options before recording a video: Record, New, Activate night mode / Deact. night mode, Mute / Unmute, Go to Gallery, Adjust, Settings, Help, and Exit.
1 Press Camera in the standby mode. 2 Press or to move between Image and Video views. Open the Video view. An indicator shows where the video will be saved: to phone memory ( ) or memory card ( ). 3 Press to start recording. The record icon is shown. 1. The elapsed time / time left with the current video length setting. 2.The zoom indicator shows the zoom level. Press to zoom in on your subject before or during recording. Press to zoom out. 3. Microphone muted indicator. 4. Night mode active indicator. To pause recording at any time, press. The pause icon starts to blink on the display. Press again to resume recording. Video recording is automatically stopped if recording is set to pause and there are no key presses within a minute. 4 Press Stop to stop recording. The video clip is automatically saved to the Video clips folder of the Gallery. See Gallery, p. 36. After a video clip has been recorded: To immediately play the video clip you just recorded, select Options Play. If you do not want to keep the video, press. To return to the viewfinder to record a new video, press. To send the video Via multimedia, via e-mail, or via Bluetooth, press. For more information see the Messaging chapter, p. 45 and Bluetooth connection, p. 87.

Receiving logos, tones, business cards, calendar entries, and settings
Tip! If you receive a vCard file that has a picture attached, the picture is saved to Contacts. Your phone can receive many kinds of text messages that contain data ( ), also called Over-The-Air (OTA) messages. Configuration message - You may receive a text message service number, voice mailbox number, Internet access point settings, access point login script settings, or e-mail settings from your network operator, service provider, or company information management department in a configuration message. To save the settings, select Options Save all. Business card - To save the information to Contacts, select Options Save business card. Certificates or sound files attached to the business card are not saved.
R0915_en.book Page 53 Tuesday, February 8, 2005 11:46 AM
Ringing tone - To save the ringing tone, select Options Save. Operator logo - For the logo to be shown in the standby mode instead of the network operators own identification, select Options Save. Calendar entry - To save the invitation, select Options Save to Calendar. Web message - To save the bookmark to the bookmarks list in Web, select Options Add to bookmarks. If the message contains both access point settings and bookmarks, to save the data, select Options Save all. E-mail notification - Tells you how many new e-mails you have in your remote mailbox. An extended notification may list more detailed information.
Receiving Web service messages
Web service messages ( ) are notifications (for example, news headlines) and may contain a text message or a link. For availability and subscription, contact your service provider.
Tip! To change the default access point settings for multimedia messaging, select Messaging Options Settings Multimedia message Access point in use.

My folders

In My folders, you can organise your messages into folders, create new folders, and rename and delete folders.

Mailbox

If you select Mailbox and have not set up your e-mail account, you are prompted to do so. See Settings for e-mail, p. 59. When you create a new mailbox, the name you give to the mailbox replaces Mailbox in the Messaging main view. You can have several mailboxes (up to six).

Browsing

R0915_en.book Page 70 Tuesday, February 8, 2005 11:46 AM

Viewing saved pages

If you regularly browse pages containing information which does not change very often, you can save and browse them when offline. In the saved pages view you can also create folders to store your saved browser pages. To open the Saved pages view, press in the Bookmarks view. In the Saved pages view, press to open a saved page ( ). To save a page, while browsing select Options Advanced options Save page. To start a connection to the browser service and to download the latest version of the page, select Options Reload. The phone stays online after you reload the page. Options in the Saved pages view: Open, Back to page, Reload, Saved pages, Mark/ Unmark, Navigation options, Advanced options, Details, Settings, Help, and Exit. Tip! Your browser collects bookmarks automatically while you are browsing Web pages. The bookmarks are stored to the Automatic bookmarks folder ( ) and automatically organised according to domain. See also Settings for Web, p. 71.
Downloading and purchasing items
You can download items such as ringing tones, images, operator logos, themes, and video clips. These items can be provided free, or you can purchase them. Downloaded items are handled by the respective applications in your phone, for example, a downloaded photo can be saved in Gallery. Important: Only install applications from sources that offer adequate protection against harmful software. 1 To download the item, scroll to the link, and press. If the item is provided free, press Accept. Once downloaded, the content is automatically opened in a suitable application. To cancel the download, press Cancel. 2 Choose the appropriate option to purchase the item, for example, Buy. 3 Carefully read all the information provided. If the online content is compatible, you can use your wallet information to make the purchase.
R0915_en.book Page 71 Tuesday, February 8, 2005 11:46 AM
4 Select Open Wallet. You will be prompted for your wallet code. See Creating a wallet code, p. 76. 5 Select the appropriate card category from your wallet. 6 Select Fill in. This will upload the selected wallet information. If the wallet does not contain all information necessary for the purchase, you will be requested to enter the remaining details manually. Note: Copyright protections may prevent some images, ringtones and other content from being copied, modified, transferred, or forwarded.

Glossary: Cookies are a means of content providers to identify users and their preferences for frequently used content.
R0915_en.book Page 73 Tuesday, February 8, 2005 11:46 AM

Calculator

To add, substract, multiply, divide, calculate square roots and percentages, press select Organiser Calculator. and Note: This calculator has limited accuracy and is designed for simple calculations. To save a number in the memory (indicated by M), select Options Memory Save. To retrieve a number in memory, select Options Memory Recall. To clear a number in memory, select Options MemoryClear.

Calculating percentages

Enter a number for which you want to calculate a percentage. Select , , , or. Enter the percentage. Select.
Press and select Organiser Notes to write notes. You can send notes to other compatible devices and plain text files (TXT format) that you receive can be saved to Notes.

Organiser

R0915_en.book Page 74 Tuesday, February 8, 2005 11:46 AM

Go to - adding shortcuts

Default shortcuts: opens Calendar, opens Inbox and opens Notes. To store shortcuts, links to your favourite images, notes, bookmarks, and so on, press and select Organiser Go to. Shortcuts can be added only from the individual applications, like Gallery. Not all applications have this function. 1 Select an item from an application to which you want to add a shortcut. 2 Select Add to 'Go to'. A shortcut in Go to is automatically updated if you move the item to which it is pointing, for example, from one folder to another. To change the identifier in the lower left corner of the shortcut icon, select Options Shortcut icon.

Deleting a shortcut

Select the shortcut and press be deleted. The default shortcuts Notes, Calendar, and Inbox cannot When you remove an application or a document which has a shortcut in the Go to, the shortcut icon of the removed item will be dimmed in the Go to view. The shortcut can be deleted next time you try to open the shortcut.
Converter - converting measures
Options in Converter: Select unit/ Change currency, Conversion type, Currency rates, Help, and Exit. To convert measures such as Length from one unit (Yards) to another (Metres), press and select Organiser Converter. Note that the Converter has limited accuracy, and rounding errors may occur. 1 Scroll to the Type field, and press to open a list of measures. Scroll to the measure you want to use, and press OK.
R0915_en.book Page 75 Tuesday, February 8, 2005 11:46 AM
2 Scroll to the first Unit field, and press. Select the unit from which you want to convert, and press OK. Scroll to the next Unit field, and select the unit to which you want to convert. 3 Scroll to the first Amount field, and enter the value you want to convert. The other Amount field changes automatically to show the converted value. Press to add a decimal and for the +, - (for temperature), and E (exponent) symbols.

Bluetooth settings

Bluetooth - On/Off

Connectivity

R0915_en.book Page 88 Tuesday, February 8, 2005 11:46 AM
Icons for different Bluetooth devices: - Computer - Phone - Audio/video - Headset - Other
My phone's visibility - Shown to all: your phone can be found by other Bluetooth devices, or Hidden: your phone cannot be found by other devices. My phone's name - Define a Bluetooth name for your phone. After you have set Bluetooth to be active and changed My phone's visibility to Shown to all, your phone and this name can be seen by other Bluetooth device users.
Sending data using Bluetooth
There can be only one active Bluetooth connection at a time. 1 Open an application where the item you wish to send is stored. For example, to send an image to another compatible device, open the Gallery application. 2 Select the item, for example an image, and select Options Send Via Bluetooth. The phone starts to search for devices within range. Bluetooth enabled devices that are within range start to appear on the display one by one. You can see a device icon, the Bluetooth name of the device, the device type, or a short name. Tip! If you have searched for Bluetooth devices earlier, a list of the devices that were found previously is shown first. To start a new search, select More devices. If you switch off the phone, the list is cleared. To interrupt the search, press Stop. The device list freezes and you can start to form a connection to one of the devices already found. 3 Scroll to the device with which you want to connect, and press Select. 4 Pairing (if required by the other device) Glossary: Pairing means authentication. The users of the Bluetooth enabled devices should agree what the passcode is and use the same passcode for both devices in order to pair them. Devices that do not have a user interface have a factory-set passcode. If the other device requires pairing before data can be transmitted, a tone sounds and you are asked to enter a passcode. Create your own passcode (1-16 characters long, numeric) and agree with the owner of the other Bluetooth device to use the same code. The passcode is used only once.
Tip! When searching for devices, some Bluetooth devices may show only the unique Bluetooth addresses (device addresses). To find the unique Bluetooth address of your phone, enter the code *#2820# in the standby mode.
R0915_en.book Page 89 Tuesday, February 8, 2005 11:46 AM
When the connection has been established, the note Sending data is shown. The Drafts folder in Messaging does not store messages sent using Bluetooth. Checking the status of the Bluetooth connection When is shown in the standby mode, Bluetooth is active. When is blinking, your phone is trying to connect to the other device. When is shown continuously, the Bluetooth connection is active.

Pairing devices

Paired devices are easier to recognise, they are indicated by in the device search. In the Bluetooth main view, press to open the Paired devices view ( ). To pair with a device, select Options New paired device. The phone starts a device search. Scroll to the device, and press Select. Exchange passcodes, see step 4 (Pairing), p. 88. To cancel a pairing, scroll to the device, and select Options Delete. If you want to cancel all pairings, select Options Delete all. Tip! If you are currently connected to a device and delete the pairing with that device, pairing is removed immediately, but the connection remains active. To set a device to be authorised or unauthorised, scroll to a device, and select Options: Set as authorised - Connections between your phone and this device can be made without your knowledge. No separate acceptance or authorisation is needed. Use this status for your own devices, such as your compatible Bluetooth headset or PC, or devices that belong to someone you trust. The icon is added next to authorised devices in the Paired devices view. Set as unauthorised - Connection requests from this device need to be accepted separately every time. Tip! To define a short name (nickname or alias), scroll to the device and select Options Assign short name in the Paired devices view. This name helps you to recognise a certain device during device search or when a device requests a connection.
After pairing, the device is saved to the Paired devices view.
Tip! To send text using Bluetooth (instead of text messages), go to Notes, write the text, and select Options Send via Bluetooth.
R0915_en.book Page 90 Tuesday, February 8, 2005 11:46 AM
Receiving data using Bluetooth
When you receive data using Bluetooth, a tone sounds, and you are asked if you want to accept the Bluetooth message. If you accept, is shown, and the item is placed in the Inbox folder in Messaging. Bluetooth messages are indicated by. See Inbox - receiving messages, p. 51.

Switching off Bluetooth

R0915_en.book Page 96 Tuesday, February 8, 2005 11:46 AM
settings, the phone may take a longer time to power on. Documents and files are unaffected.

Standby mode

You can assign keypad shortcuts for the different keypresses in the standby mode: is the Left selection key, pressing is the same as Navigation key right, and is the same as Selection key. You cannot have a shortcut to an application that you have installed. Operator logo - This setting is visible only if you have received and saved an operator logo. You can choose if you want the operator logo to show or not.

Display

Brightness - You can change the brightness of the display to lighter or darker. The brighness of the display is automatically adjusted according to the environment. Screen saver timeout - The screen saver is activated when the timeout period is over. Light time-out - Select a timeout after which the backlight will be switched off.

Call settings

Fig. 13 The screen saver changes to show the number of new messages or missed calls. Send my caller ID (network service) - You can set your phone number to be displayed to (Yes) or hidden from (No) the person to whom you are calling; or the value may be set by your network operator or service provider when you make a subscription (Set by network). Call waiting (network service) - If you have activated call waiting, the network will notify you of a new incoming call while you have a call in progress. Select Activate to request the network to activate call waiting, Cancel to request the network to deactivate call waiting, or Check status to check if the function is active or not. Reject call with SMS - Select Yes to send a text message to a caller informing why you could not answer the call. See Answering or rejecting a call, p. 23.
R0915_en.book Page 97 Tuesday, February 8, 2005 11:46 AM
Image in video call - You can deny video sending when you receive a video call. Select a still image to be displayed instead of video. Automatic redial - Select On, and your phone will make a maximum of ten attempts to connect the call after an unsuccessful call attempt. Press to stop automatic redialling. Summary after call - Activate this setting if you want the phone to briefly display the approximate duration of the last call. Speed dialling - Select On, and the numbers assigned to the speed dialling keys ( ) can be dialled by pressing and holding the key. See also Speed dialling a phone number, p. 22. Anykey answer - Select On, and you can answer an incoming call by briefly pressing any key, except , , , and. Line in use (network service) - This setting is shown only if the SIM card supports two subscriber numbers, that is, two phone lines. Select which phone line you want to use for making calls and sending text messages. Calls on both lines can be answered irrespective of the selected line. If you select Line 2 and have not subscribed to this network service, you will not be able to make calls. When line 2 is selected, is shown in the standby mode. Line change (network service) - To prevent line selection, select Line change Disable if supported by your SIM card. To change this setting, you need the PIN2 code. Tip! To switch between the phone lines, press and hold in standby mode. Tip! To change the settings for call diverting, press and select Tools Settings Call divert. See Call diverting, p. 104.

Access points

Follow the instructions given to you by your service provider. Connection name - Give a descriptive name for the connection. Data bearer - Depending on what data connection you select, only certain setting fields are available. Fill in all fields marked with Must be defined or with a red asterisk. Other fields can be left empty, unless you have been instructed otherwise by your service provider. To be able to use a data connection, the network service provider must support this feature, and if necessary, activate it for your SIM card. Access point name (for packet data only) - The access point name is needed to establish a connection to the packet data and UMTS networks. You obtain the access point name from your network operator or service provider. User name - The user name may be needed to make a data connection, and is usually provided by the service provider. The user name is often case-sensitive. Prompt password - If you must enter a new password every time you log in to a server, or if you do not want to save your password in the phone, choose Yes. Password - A password may be needed to make a data connection, and is usually provided by the service provider. The password is often case-sensitive. Options in the Access points list: Edit, New access point, Delete, Help, and Exit.
Options when editing access point settings: Change, Advanced settings, Help, and Exit. Tip! See also Receiving MMS and email settings, p. 51, Settings for e-mail, p. 59, and Accessing the Web, p. 66.
Receiving access point settings
R0915_en.book Page 100 Tuesday, February 8, 2005 11:46 AM
Authentication - Normal or Secure. Homepage - Depending on what you are setting up, write either the Web address, or the address of the multimedia messaging centre. Select Options Advanced settings to change the following settings: Glossary: DNS Domain Name Service. An Internet service that translates domain names such as www.nokia.com into IP addresses like 192.100.124.195 Network type - Select the Internet protocol type to be used: IPv4 settings or IPv6 settings. Phone IP address - The IP address of your phone. Name servers - Primary name server: The IP address of the primary DNS server, Second. Name server: The IP address of the secondary DNS server. Contact your Internet service provider to obtain these addresses. Proxy serv. address - Define the address for the proxy server. Proxy port number - Enter the proxy port number.

To check certificate details, scroll to a certificate, and select Options Certificate details. When you open certificate details, Certificate management checks the validity of the certificate, and one of the following notes may appear: Certificate not trusted - You have not set any application to use the certificate. See Changing the trust settings, p. 104. Expired certificate - The period of validity has ended for the selected certificate. Certificate not valid yet - The period of validity has not yet begun for the selected certificate. Certificate corrupted - The certificate cannot be used. Contact the certificate issuer. Changing the trust settings Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner. Scroll to an authority certificate, and select Options Trust settings. Depending on the certificate, a list of the applications that can use the selected certificate is shown. For example: Symbian installation: Yes - The certificate is able to certify the origin of new Symbian operating system application. Internet: Yes - The certificate is able to certify servers. App. installation: Yes - The certificate is able to certify the origin of new Java application. Select Options Edit trust setting to change the value.

Call diverting

Icon: When all calls are diverted, is shown in the standby mode. 1 To direct your incoming calls to your voice mailbox or another phone number, press and select Tools Settings Call divert. For details, contact your service provider. 2 Select which calls you want to divert: Voice calls, or Data and video calls.
R0915_en.book Page 105 Tuesday, February 8, 2005 11:46 AM
3 Select the desired divert option. For example, If busy to divert voice calls when your number is busy or when you reject incoming calls. 4 Set the divert option on (Activate) or off (Cancel), or check whether the option is activated (Check status). Several divert options can be active at the same time. Call barring and call diverting cannot be active at the same time.

The SAR limit stated in the international guidelines is 2.0 W/ kg*. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a base station, the lower the power output of the device. The highest SAR value for this device when tested for use at the ear is 0.83 W/kg. This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 1.5 cm away from the body. When a carry case, belt clip or holder is used for body-worn operation, it should not contain metal and should position the product at least 1.5 cm away from your body. In order to transmit data files or messages, this device requires a quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Ensure the above separation distance instructions are followed until the transmission is completed. * The SAR limit for mobile devices used by the public is 2.0 watts/kilogram (W/kg) averaged over ten grams of body tissue. The guidelines incorporate a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. SAR values may vary depending on national reporting requirements and the network band. For SAR information in other regions please look under product information at www.nokia.com.
WARNING! In Offline profile you cannot make calls, except calls to certain emergency numbers, or use features that require network coverage.
Certification information (SAR)
THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES Your mobile device is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radio frequency (RF) recommended by international guidelines (ICNIRP). These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines were developed by independent scientific organisations through periodic and thorough evaluation of scientific studies. The guidelines include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for mobile devices employs a unit of measurement known as the Specific Absorption Rate, or SAR.

R0915_en.book Page 117 Tuesday, February 8, 2005 11:46 AM
access points 97 settings 99 activation keys 109 alarms alarm clock 16 calendar alarms 63 applications, Java 107
cache clearing 71 calendar alarm 63 sending entries 63 stopping a calendar alarm 63 synchronising PC Suite 64 call register see log calls dialled numbers 25 duration 25 international 21 received 25 settings 96 settings for call divert 104 transferring 24 camera adjusting brightness 33 adjusting contrast 33 night mode 33 saving video clips 35 self-timer 34 sending images 33 sequence mode 34 video recorder settings 36
Bluetooth connecting two devices, pairing 88 connection requests 88 connection status indicators 89 device address 88 device icons 88 factory set passcode 88 headset 106 pairing requests 88 pairing, glossary explanation 88 passcode, glossary explanation 88 switching off 90 bookmark, glossary explanation 67 brightness display 96 setting in camera 33
CD-ROM 90 certificates 103 chat see instant messaging clear screen See standby mode clock alarm 16 settings 16 snooze 16 codes 101 lock code PIN code 101 PIN2 code 101 computer connections 90 conference call 23 connection settings 97 contact cards inserting pictures 28 storing DTMF tones 24 contrast setting in camera 33 copying contacts between the SIM card and device memory 29 text 49 copyright protection
R0915_en.book Page 118 Tuesday, February 8, 2005 11:46 AM
see activation keys cutting text 49
data connections details 91 ending 91 indicators 15 date settings 101 digital rights management, DRM see activation keys DNS, domain name service, glossary explanation 100
JAR file 108 RealOne Player 42 SIS file 107 file manager 17 fixed dialling 102
lock code 101 log erasing contents 26 filtering 26 log duration 26 loopset settings 106 loudspeaker 17 activating 17 turning off 17

gallery 36

handsfree see loudspeaker headset settings 106
mailbox 53 media files fast forward 43 file formats 42 mute sound 43 rewind 43 memory clearing memory 25 viewing memory consumption 18 memory card 19 memory card adapter see the Quick Start Guide, reducedsize MultiMediaCard adapter menu rearranging 12 messaging e-mail 49 multimedia message 49 text message 49

indicators 15 instant messaging 80 blocking 82 connecting to a server 80 groups 84 individual conversations 83 recording the messages 83 sending a private message 82 sending instant messages 82 user ID, glossary explanation 83 internet access points (IAP) See access points IP address, glossary explanation 100
editing videos 38 adding effects 38 adding sound clips 38 adding transitions 38 custom video clips 38 e-mail 49 offline 56 opening 55 remote mailbox 53 retrieving from mailbox 54 settings 59 viewing attachments 55

file formats JAD file

Java See applications, Java
R0915_en.book Page 119 Tuesday, February 8, 2005 11:46 AM
movies, muvees custom muvees 40 quick muvees 40 multimedia messages 49 mute sound 43 my home city 17
removing a personal ringing tone 30 RSMMC, reduced-size MMC see the Quick Start Guide
security code see lock code sending calendar entries 63 contact cards, business cards 29 images 33 video clips 39 service commands 46 settings access codes 101 access points 99 Bluetooth 87 calendar 64 call barring 105 call diverting 104 certificates 103 data connections 97 date and time 101 display 96 headset 106 IM settings 80, 81, 86 language 95 lock code 101 loopset 106 original settings 95
packet data connections 91 GPRS, glossary explanation 98 settings 100 pasting text 49 PC connections via Bluetooth or USB cable 90 PC Suite calendar data 64 synchronisation 90 transfering images to a PC 37 viewing phone memory data 18 personalisation 13 PIN code 101
recording video 36 recording voice tags 30, 106 reminder See calendar, alarm remote mailbox 53 resolution, glossary explanation 34 ringing tones adding a personal ringing tone 29 receiving in a text message 53
personalising the phone 11 PIN code 101 screen saver 96 UPIN code 101 UPUK code 101 wallet 78 wallet code 101 shortcuts camera 33 see the Quick Start Guide web connection 67 SIM card copying names and numbers to phone 29 messages 57 names and numbers 29 SIS file 107 SMS centre, short message service centre 57 snooze alarm clock 16 calendar alarm 63 software transferring a file to your device 107 sound clips 36 sounds muting a ringing tone 23 personalising 12 recording sounds 41
R0915_en.book Page 120 Tuesday, February 8, 2005 11:46 AM
speed dialling 22 standby mode 11 synchronisation 92
text message 49 text message service centre adding new 57 thumbnail images in a contact card 28 time settings 101 transfering content from another phone 110
see camera voice dialling 30, 106 voice mailbox 21 changing the phone number 21 diverting calls to voice mailbox 104 voice messages 21 voice tags 30, 106 adding 30, 106 making calls 31 volume control 17 during a call 21 loudspeaker 17