Number of storable pictures (still pictures)/ Continuous recording length (movies) in the internal memory and xD-Picture Card (p. 47)
To remove the xD-Picture Card
Press the card in until it clicks and comes out slightly, then grab the card and pull it out.
Using the microSD card/ microSDHC card (sold separately)
A microSD card or microSDHC card (hereafter both will be referred to as microSD card) is also compatible with this camera using the microSD Attachment.
Using the microSD Attachment (p. 48)
Arrow pad and operation guide
The symbols 1243, displayed on various setting and movie playback screens indicate that the arrow pad be used.

EXPOSURE COMP.

Insert the microSD card into the microSD Attachment.

+1.12 30

CANCEL
Insert the card entirely into the attachment.
2009.08.26 12:30 100-0004 IN 00:14 /00:34 /
Insert the microSD Attachment into the camera.

2 Arrow pad

Operation guides displayed at the bottom of the screen indicate that the m button, B button, zoom buttons, or D button be used.
To remove the microSD card

SEL. IMAGE

SET OK 1
Pull the microSD card straight out.
Do not touch the contact area of the microSD Attachment and/or microSD card.

Operation guide

Setting the date and time
The date and time set here are saved to image le names, date prints, and other data.
Changing the display language
The language for the menu and error messages displayed on the monitor is adjustable.
Press the n button to turn on the camera.
The date and time setting screen is displayed
when the date and time are not set.
Press the m button, and press klmn to select [E] (SETUP).

---- -- -- -- --

Date and time setting screen

Press the B button.

Use kl to select the year for [Y].

2009 -- -- -- --

Use kl to select [W] and press the B button.
ENGLISH FRANCAIS DEUTSCH ESPAOL ITALIANO

Press n to save the setting for [Y].

-- -- --

Use klmn to select your language and press the B button. Press the m button.
As in Steps 2 and 3, use klmn and the B button to set [M] (month), [D] (day), [TIME] (hours and minutes), and [Y/M/D] (date order).
For a more accurate setting, press the B button when the time signal hits 00 seconds. To change the date and time, adjust the setting from the menu. [X] (Date/time) (p. 31)
Shooting, Playback, and Erasing
Shooting with the optimum aperture value and shutter speed (P mode)
In this mode, automatic shooting settings are activated while also allowing changes to a wide range of shooting menu functions such as exposure compensation, white balance, etc. as needed.
Hold the camera and compose the shot.

AUTO AUTO

1/400 F3.5 1/400 F3.5

Horizontal grip

P mode indicator

Vertical grip

Press the shutter button halfway down to focus on the subject.
When the camera focuses on the subject, the
exposure is locked (shutter speed and aperture value are displayed), and the AF target mark changes to green.
Number of storable still pictures (p. 47) Monitor (standby mode screen)
If P mode is not displayed, press the K button several times to select it.
Current shooting mode display
The camera was unable to focus if the AF target
mark ashes red. Try focusing again.

AF target mark

Press halfway

1/400 F3.1

Press the n button again to turn off the camera.
Shutter speed Aperture value

Focusing (p. 43)

To take the picture, gently press the shutter button all the way down while being careful not to shake the camera.

Viewing images

Press the q button.

Press fully

100-0001 2009.08.26 12:30

Image review screen

Number of frames Playback image
To view images during shooting
Pressing the q button enables playback of images. To return to shooting, either press the K button or press the shutter button halfway down.
Use klmn to select an image.

Displays next image

Displays 10 frames before the current image

To shoot movies

Shooting movies (A mode) (p. 18)
Displays previous image Displays 10 frames after the current image
The display size of the images can be changed. Index view and close-up view (p. 23)

To play back movies

Select a movie, and press the B button.
2009.08.26 12:30 100-0004 IN 4 MOVIE PLAY OK

Use kl to select the best shooting mode for the scene, and press the B button.
Icon indicating the scene mode that is set
Press the K button a few times to set G.
The icon changes depending on the scene that the camera automatically selects.
In s modes, the optimum shooting settings are pre-programmed for specic shooting scenes. For this reason, settings may not be changed in some modes.
Press the shutter button halfway down or press the
g button to check which shooting mode the camera has automatically selected.

Shooting movies (n mode)

In some cases, the camera may not select the desired shooting mode. When the camera cannot identify which is the optimal mode, P mode will be selected.
Press the K button a few times to set n.

A mode indicator

Using the digital image stabilization mode (h mode)
This mode enables the user to reduce blur that is caused by camera shake and subject movement.
Press the K button a few times to set h.

h mode indicator

Press the shutter button halfway down to focus on the subject, and gently press the button all the way down to start recording.
Lights up red when recording
By switching to any of other shooting modes, most function settings in h mode will change to the default settings of the newly selected mode.
Remaining recording time (p. 47)
Gently press the shutter button all the way down to stop recording.
Audio is recorded simultaneously with the movie. During audio recording, only the digital zoom can be used. To record a movie with optical zoom, set [R] (movies) (p. 25) to [OFF].

Using Shooting Functions

Using the zoom
Pressing the zoom buttons adjusts the shooting range.
Pressing the wide (W) button Pressing the telephoto (T) button

Using the ash

The ash functions can be selected to best match the shooting conditions.

Press the # button.

FLASH AUTO

AUTO ! # $

Zoom bar
Optical zoom: 3x, digital zoom: 4x Use of h mode (p. 18) is recommended when shooting with the telephoto zoom. The zoom bar appearance identies the status of the digital zoom.

WB AUTO

AUTO 1 w x y

NORM +2.0

No information

Use kl to select the menu function and mn to select the desired setting option, and then press the B button to set.

Using Playback Features

Index view and close-up view
Index view enables quick selection of a desired image. Close-up view (up to 10x magnication) allows checking of image details.
Changing the image information display
Shooting information settings displayed on the screen can be changed.

Press the zoom buttons.

The displayed image information changes in
the order shown below each time the button is pressed.

Single-image view

Close-up view
100-0004 2009.08.26 12:30

100-0004 IN 4

Index view

Detailed

1/1000 F3.1 +2.0

ISO 400

To select an image in index view
Use klmn to select an image, and press the B button to display the selected image in single-image view.
To scroll an image in close-up view
Use klmn to move the viewing area.
E indicates the mode in which the function can be set. The default settings of the function are highlighted in.
Selecting the appropriate image quality for your application [A IMAGE QUALITY] A IMAGE QUALITY

E: P G h s n

Still pictures

Submenu 1 Submenu 2

FE-3010/X-895: 12M (39682976) FE-3000/X-890: 10M (36482736) 5M (25601920) IMAGE SIZE 3M (20481536) 2M (16001200) 1M (1280960) VGA (640480) 16:9 (19201080) COMPRESSION FINE NORMAL
Suitable for printing pictures larger than A3 (1117 in.). Suitable for printing A4 (8.511 in.) pictures. Suitable for printing pictures up to A4 (8.511 in.). Suitable for printing A5 (57 in.) pictures. Suitable for printing pictures at postcard size. Suitable for viewing pictures on a TV or using pictures in emails and on websites. Suitable for playing pictures on a wide screen TV. Shooting at high quality. Shooting at normal quality.

Movies

IMAGE SIZE FRAME RATE
VGA (640480) / QVGA (320240) N 30fps*1/ O 15fps*1
Select the image quality based on the image size and frame rate. Higher frame rates provides smoother movie images.

frames per second

Number of storable pictures (still pictures)/Continuous recording length (movies) in the internal memory and xD-picture Card (p. 47)
Select the settings for the functions while referring to Using the Menu (p. 3).
Adjusting to a natural color scheme [WB] B CAMERA MENU WB

E: P h s n Submenu 2

AUTO 1 w
Recording sound when shooting still images [R] B CAMERA MENU R

E: P h s Submenu 2

The camera automatically adjusts the white balance according to the shooting scene. For shooting outdoors under a clear sky For shooting outdoors under a cloudy sky For shooting under tungsten lighting For shooting under daylight uorescent lighting (household lighting, etc.) For shooting under neutral uorescent lighting (desk lamps, etc.) For shooting under white uorescent lighting (ofces, etc.)

The image is rotated 90 clockwise. The image is not rotated. The image is rotated 90 counter-clockwise.
1 Use mn to select an image. 2 Use kl to select the rotation direction. 3 If necessary, repeat Steps 1 and 2 to make settings for other images, and press the B button.

Cropping frame

The new picture orientations will be saved even after the power is turned off.

3 Press the B button.

The edited image will be saved as a separate

image.

Adding sound to still images [R] J PLAYBACK MENU R

Submenu 2 Application

The camera adds (records) sound for approx. 4 seconds while playing back the image. This is useful for recording notes or comments about the image. No sound is recorded.
To individually select and erase images [SEL. IMAGE]
1 Use kl to select [SEL. IMAGE], and press the B button. 2 Use klmn to select the image to be erased, and press the B button to add a R mark to the image.
1 Use mn to select an image, and press the B button. 2 Aim the microphone towards the sound source.

R mark

Microphone
3 Repeat Step 2 to select the images to be erased, and then press the D button to erase the selected images. 4 Use kl to select [YES], and press the B button.
3 Use kl to select [YES], and press the B button.
The images with a R mark are erased. To erase all images [ALL ERASE]
1 Use kl to select [ALL ERASE], and press the B button. 2 Use kl to select [YES], and press the B button.

Recording starts.

Erasing images [K ERASE] K ERASE

SEL. IMAGE ALL ERASE

Images are individually selected and erased. All images in the internal memory or card will be erased.
Saving print settings to the image data [L PRINT ORDER] L PRINT ORDER
Print reservations (DPOF) (p. 37) Print reservation can be set only for still images that are recorded to the card.
When erasing pictures in the internal memory, do not insert the card into the camera. When erasing pictures from the card, insert a card into the camera in advance.
Menus for Other Camera Settings
Erasing data completely [MEMORY FORMAT]/[FORMAT] E SETUP MEMORY FORMAT/FORMAT
Before formatting, check that no important data is left in the internal memory or card. Non-Olympus cards and cards that have been formatted by a computer must be formatted with this camera before use. Submenu 2
Changing the display language [W] E SETUP W
Changing the display language (p. 13) Submenu 2

Languages*1

The language for the menus and error messages displayed on the monitor is selected.
Completely erases the image data in the internal memory*1 or card (including protected images). Cancels formatting.

To select the date display order
1 Press n after setting Minute, and use kl to select the date display order.
When set to [NO], all shooting settings, except for P mode, [A IMAGE QUALITY], and the selected s mode, return to default settings when the camera is turned off.

Date order

Selecting a video signal system to match your TV [VIDEO OUT] E SETUP VIDEO OUT
The TV video signal system varies depending on the countries and regions. Before viewing camera images on your TV, select the video output according to your TVs video signal type. Submenu 2

NTSC PAL

Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on. Connecting the camera to a TV in European countries, China, and so on.
The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TV
1 Connect the TV and camera.
Multi-connector Connect to the TV video input jack (yellow) and audio input jack (white).

AV cable (supplied)

2 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/ [PAL]). 3 Turn on the TV, and change INPUT to VIDEO (an input jack connected to the camera).
For details on changing the input source of the TV, refer to the TVs instruction manual.
4 Press the q button, and use klmn to select the image for playback.
Depending on the TVs settings, the displayed images and information may become cropped.
Saving battery power between shots [POWER SAVE] E SETUP POWER SAVE
Turning off the camera sounds [F SILENT MODE] F SILENT MODE
Cancels [POWER SAVE]. When the camera is not being used for approx. 10 seconds, the monitor automatically turns off to save battery power.
Button operation sound/warning sound are not muted. The electronic sounds (button operation sound, warning sound) are muted.

To resume standby mode

Press any button.

[BEEP] (p. 31)

Direct printing (PictBridge*1)
By connecting the camera to a PictBridgecompatible printer, you can print images directly without using a computer. To nd out if your printer supports PictBridge, refer to the printers instruction manual.
Turn on the printer, and then connect the printer and camera.

n button

Multi-connector
PictBridge is a standard for connecting digital cameras and printers of different makers and printing out pictures directly.

N O N O

640480 320240
Continuous recording length Internal memory Using a 1 GB xD-Picture Card With sound Without sound With sound Without sound 10 sec. 10 sec. 8 min. 59 sec.* 9 min. 5 sec.*
20 sec. 28 sec. 54 sec. 20 sec. 29 sec. 58 sec. 17 min. 48 sec. 24 min. 43 sec. 48 min. 2 sec. 18 min. 11 sec. 25 min. 28 sec. 50 min. 55 sec.
The maximum le size of a single movie is 2 GB, regardless of the capacity of the card. * When using a TypeM or Standard xD-Picture Card, the maximum recording length will be 10 seconds.
Increasing the number of pictures that can be taken
Either erase unwanted images, or connect the camera to a computer or other device to save the images, and then erase the images in the internal memory or card. [ERASE] (p. 16), [SEL. IMAGE] (p. 29), [ALL ERASE] (p. 29), [MEMORY FORMAT]/[FORMAT] (p. 30)
Using the microSD Attachment
Do not use the attachment with Olympus digital cameras that do not support this microSD Attachment, as well as with other brands of digital cameras, computers, printers, and other devices that support xD-Picture Card. Doing so not only may damage the pictures taken, but may also result in the malfunction of the device. If the microSD card cannot be removed, do not use force. Contact authorized distributors/service centers.

SAFETY PRECAUTIONS

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED OLYMPUS SERVICE PERSONNEL. An exclamation mark enclosed in a triangle alerts you to important operating and maintenance instructions in the documentation provided with the product. If the product is used without observing the information given under this symbol, serious injury or death may result. If the product is used without observing the information given under this symbol, injury or death may result. If the product is used without observing the information given under this symbol, minor personal injury, damage to the equipment, or loss of valuable data may result.
microSD card/microSDHC card
For a list of tested microSD cards, please visit our website (http://www.olympus.com/).

DANGER

WARNING

Sending images

You can send images to a computer or a PictBridge printer by using the USB cable provided with the camera. To send data to other devices, remove the attachment from the camera and use a commercially available microSD card adapter.
WARNING! TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK, NEVER DISASSEMBLE, EXPOSE THIS PRODUCT TO WATER OR OPERATE IN A HIGH HUMIDITY ENVIRONMENT.

Handling precautions

Do not touch the contact area of the attachment or microSD card. Doing so may cause failure in reading the images. When ngerprints or stains are found on the contact area, wipe the area with a soft dry cloth.

General Precautions

Read All Instructions Before you use the product, read all operating instructions. Save all manuals and documentation for future reference. Cleaning Always unplug this product from the wall outlet before cleaning. Use only a damp cloth for cleaning. Never use any type of liquid or aerosol cleaner, or any type of organic solvent to clean this product. Attachments For your safety, and to avoid damaging the product, use only accessories recommended by Olympus. Water and Moisture For precautions on products with weatherproof designs, read the weatherproong sections. Location To avoid damage to the product, mount the product securely on a stable tripod, stand, or bracket. Power Source Connect this product only to the power source described on the product label. Foreign Objects To avoid personal injury, never insert a metal object into the product. Heat Never use or store this product near any heat source such as a radiator, heat register, stove, or any type of equipment or appliance that generates heat, including stereo ampliers.

Handling the Camera

Do not use the camera near ammable or explosive gases. Do not use the ash and LED on people (infants, small children, etc.) at close range. You must be at least 1 m (3 ft.) away from the faces of your subjects. Firing the ash too close to the subjects eyes could cause a momentary loss of vision. Keep young children and infants away from the camera. Always use and store the camera out of the reach of young children and infants to prevent the following dangerous situations which could cause serious injury: Becoming entangled in the camera strap, causing strangulation. Accidentally swallowing the battery, cards or other small parts. Accidentally ring the ash into their own eyes or those of another child. Accidentally being injured by the moving parts of the camera. Do not look at the sun or strong lights with the camera. Do not use or store the camera in dusty or humid places. Do not cover the ash with a hand while ring. Do not insert anything into the microSD Attachment other than the microSD card. Other types of cards cannot be inserted into microSD Attachment. Do not insert anything other than an xD-Picture Card or the microSD Attachment into the camera. If you insert a card by mistake, such as a microSD card, do not use force. Contact authorized distributors/service centers.

This camera uses a lithium ion battery specied by Olympus. Do not use any other type of battery. If the batterys terminals get wet or greasy, camera contact failure may result. Wipe the battery well with a dry cloth before use. Always charge a battery when using it for the rst time, or if it has not been used for a long period. When operating the camera with battery power at low temperatures, try to keep the camera and spare battery as warm as possible. A battery that has run down at low temperatures may be restored after it is warmed at room temperature. The number of pictures you can take may vary depending on the shooting conditions or battery. Before going on a long trip, and especially before traveling abroad, purchase extra batteries. A recommended battery may be difcult to obtain while traveling. Please recycle batteries to help save our planets resources. When you throw away dead batteries, be sure to cover their terminals and always observe local laws and regulations.

LCD Monitor

Do not push the monitor forcibly; otherwise the image may become vague, resulting in a playback mode failure or damage to the monitor. A strip of light may appear on the top/bottom of the monitor, but this is not a malfunction. When a subject is viewed diagonally in the camera, the edges may appear zigzagged on the monitor. This is not a malfunction; it will be less noticeable in playback mode. In places subject to low temperatures, the LCD monitor may take a long time to turn on or its color may change temporarily. When using the camera in extremely cold places, it is a good idea to occasionally place it in a warm place. An LCD monitor exhibiting poor performance due to low temperatures will recover in normal temperatures. The LCD used for the monitor is made with high-precision technology. However, black spots or bright spots of light may appear constantly on the LCD Monitor. Due to its characteristics or the angle at which you are viewing the monitor, the spot may not be uniform in color and brightness. This is not a malfunction.

Legal and Other Notices

Olympus makes no representations or warranties regarding any damages, or benet expected by using this unit lawfully, or any request from a third person, which are caused by the inappropriate use of this product. Olympus makes no representations or warranties regarding any damages or any benet expected by using this unit lawfully which are caused by erasing picture data.

Warning

Unauthorized photographing or use of copyrighted material may violate applicable copyright laws. Olympus assumes no responsibility for unauthorized photographing, use or other acts that infringe upon the rights of copyright owners.

Copyright Notice

All rights reserved. No part of these written materials or this software may be reproduced or used in any form or by any means, electronic or mechanical, including photocopying and recording or the use of any type of information storage and retrieval system, without the prior written permission of Olympus. No liability is assumed with respect to the use of the information contained in these written materials or software, or for damages resulting from the use of the information contained therein. Olympus reserves the right to alter the features and contents of this publication or software without obligation or advance notice.
Any unauthorized changes or modications to this equipment would void the users authority to operate it.
Representative plug of power supply cord of countries/regions around the world
A Type B Type (American Type) (British Type)

BF Type (British Type)

B3 Type (British Type)

C Type (CEE Type)

SE Type (CEE Type)

O Type (Oceania Type)

The representative supply voltage and plug type are described in this chart. Depending on the area, different types of plugs and supply voltages are used. Attention: Power cord meeting demands from each country shall be used. - For only the United States Use a UL Listed, 1.8 - 3 m (6 - 10 ft), Type SPT-2 or NISPT-2, AWG no. 18 power supply cord, rated for 125 V 7 A, with a non-polarized NEMA 1-15P plug rated for 125 V 15 A.
Europe Countries/Regions Austria Belgium Czech Denmark Finland France Germany Greece Hungary Iceland Ireland Italy Luxemburg Netherlands Norway Poland Portugal Romania Russia Slovak Spain Sweden Switzerland UK Asia Countries/Regions China Hong Kong India Indonesia Japan Korea (rep) Malaysia Philippines Singapore Taiwan Thailand Vietnam Oceania Countries/Regions Australia New Zealand North America Countries/Regions Canada USA Central America Countries/Regions Bahamas Costa Rica Cuba Dominican (rep) El Salvador Guatemala Honduras Jamaica Mexico Nicaragua Panama South America Countries/Regions Argentina Brazil Chile Colombia Peru Venezuela Middle East Countries/Regions Iran Iraq Israel Saudi Arabia Turkey UAE Africa Countries/Regions Algeria Congo (dem) Egypt Ethiopia Kenya Nigeria South Africa Tanzania Tunisia
Voltage 127/Voltage 220 200/220 230/240 127/220/220 Voltage 240 230/240
Frequency (Hz) Plug type 50 C 50 C 50 C 50 C 50 C 50 C 50 C 50 C 50 C 50 C 50 C/BF 50 C 50 C 50 C 50 C 50 C 50 C 50 C 50 C 50 C 50 C 50 C 50 C 50 BF Frequency (Hz) Plug type 50 A 50 BF 50 C 50 C 50/60 A 60 C 50 BF 60 A/C 50 BF 60 A 50 C/BF 50 A/C Frequency (Hz) Plug type 50 O 50 O
Voltage Voltage 120/110/120/127 120/240 110/220 Voltage 220 127/120 Voltage 230 127/240 Voltage 127/220/220

Frequency (Hz) Plug type 60 A 60 A Frequency (Hz) Plug type 60 A 60 A 60 A/C 60 A 60 A 60 A 60 A 50 A 60 A 60 A 60 A Frequency (Hz) Plug type 50 C/BF/O 60 A/C 50 C 60 A 60 A/C 60 A Frequency (Hz) Plug type 50 C/BF 50 C/BF 50 C 50 A/C/BF 50 C 50 C/BF Frequency (Hz) Plug type 50 C 50 C 50 C 50 C 50 C/BF 50 C/BF 50 C/BF 50 C/BF 50 C
For customers in North and South America

For customers in USA

Declaration of Conformity Model Number : FE-3010/X-895 FE-3000/X-890 Trade Name : OLYMPUS Responsible Party : Address : 3500 Corporate Parkway, P.O. Box 610, Center Valley, PA 18034-0610, U.S.A. : 484-896-5000
OLYMPUS WORLDWIDE LIMITED WARRANTY - IMAGING PRODUCTS
Olympus warrants that the enclosed Olympus imaging product(s) and related Olympus accessories (individually a Product and collectively the Products) will be free from defects in materials and workmanship under normal use and service for a period of one (1) year from the date of purchase. If any Product proves to be defective within the one-year warranty period, the customer must return the defective Product to any of Olympus Service Centers, following the procedure set forth below (See WHAT TO DO WHEN SERVICE IS NEEDED). Olympus, at its sole discretion, will repair, replace, or adjust the defective Product, provided that Olympus investigation and factory inspection disclose that (a) such defect developed under normal and proper use and (b) the Product is covered under this limited warranty. Repair, replacement, or adjustment of defective Products shall be Olympuss sole obligation and the customers sole remedy hereunder. The customer is liable and shall pay for shipment of the Products to the Olympus Service Center. Olympus shall not be obligated to perform preventive maintenance, installation, deinstallation, or maintenance. Olympus reserves the right to (i) use reconditioned, refurbished, and/or serviceable used parts (that meet Olympuss quality assurance standards) for warranty or any other repairs and (ii) make any internal or external design and/or feature changes on or to its products without any liability to incorporate such changes on or to the Products.

Telephone Number

Tested To Comply With FCC Standards FOR HOME OR OFFICE USE This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

For customers in Canada

This Class B digital apparatus meets all requirements of the Canadian InterferenceCausing Equipment Regulations.
Use Only Dedicated Rechargeable Battery and Battery Charger
We strongly recommend that you use only the genuine Olympus dedicated rechargeable battery and battery charger with this camera. Using a non-genuine rechargeable battery and/or battery charger may result in re or personal injury due to leakage, heating, ignition or damage to the battery. Olympus does not assume any liability for accidents or damage that may result from the use of a battery and/or battery charger that are not genuine Olympus accessories.
WHAT IS NOT COVERED BY THIS LIMITED WARRANTY
Excluded from this limited warranty and not warranted by Olympus in any fashion, either express, implied, or by statute, are:
(a) products and accessories not manufactured by Olympus and/or not bearing the OLYMPUS brand label (the warranty coverage for products and accessories of other manufacturers, which may be distributed by Olympus, is the responsibility of the manufacturers of such products and accessories in accordance with the terms and duration of such manufacturers warranties); (b) any Product which has been disassembled, repaired, tampered with, altered, changed, or modied by persons other than Olympuss own authorized service personnel unless repair by others is made with the written consent of Olympus; (c) defects or damage to the Products resulting from wear, tear, misuse, abuse, negligence, sand, liquids, impact, improper storage, nonperformance of scheduled operator and maintenance items, battery leakage, use of nonOLYMPUS brand accessories, consumables, or supplies, or use of the Products in combination with non-compatible devices; (d) software programs; (e) supplies and consumables (including but not limited to lamps, ink, paper, lm, prints, negatives, cables and batteries); and/or (f) Products which do not contain a validly placed and recorded Olympus serial number, unless they are a model on which Olympus does not place and record serial numbers.
IF ANY IMPLIED WARRANTIES APPLY AS A MATTER OF LAW, THEY ARE LIMITED IN DURATION TO THE LENGTH OF THIS LIMITED WARRANTY. SOME STATES MAY NOT RECOGNIZE A DISCLAIMER OR LIMITATION OF WARRANTIES AND/OR LIMITATION OF LIABILITY SO THE ABOVE DISCLAIMERS AND EXCLUSIONS MAY NOT APPLY. THE CUSTOMER MAY ALSO HAVE DIFFERENT AND/OR ADDITIONAL RIGHTS AND REMEDIES THAT VARY FROM STATE TO STATE. THE CUSTOMER ACKNOWLEDGES AND AGREES THAT OLYMPUS SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES THAT THE CUSTOMER MAY INCUR FROM DELAYED SHIPMENT, PRODUCT FAILURE, PRODUCT DESIGN, SELECTION, OR PRODUCTION, IMAGE OR DATA LOSS OR IMPAIRMENT OR FROM ANY OTHER CAUSE, WHETHER LIABILITY IS ASSERTED IN CONTRACT, TORT (INCLUDING NEGLIGENCE AND STRICT PRODUCT LIABILITY) OR OTHERWISE. IN NO EVENT SHALL OLYMPUS BE LIABLE FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY KIND (INCLUDING WITHOUT LIMITATION LOSS OF PROFITS OR LOSS OF USE), WHETHER OR NOT OLYMPUS SHALL BE OR SHOULD BE AWARE OF THE POSSIBILITY OF SUCH POTENTIAL LOSS OR DAMAGE. Representations and warranties made by any person, including but not limited to dealers, representatives, salespersons, or agents of Olympus, which are inconsistent or in conict with or in addition to the terms of this limited warranty, shall not be binding upon Olympus unless reduced to writing and approved by an expressly authorized ofcer of Olympus. This limited warranty is the complete and exclusive statement of warranty which Olympus agrees to provide with respect to the Products and it shall supersede all prior and contemporaneous oral or written agreements, understandings, proposals, and communications pertaining to the subject matter hereof. This limited warranty is exclusively for the benet of the original customer and cannot be transferred or assigned.

EXCEPT FOR THE LIMITED WARRANTY SET FORTH ABOVE, OLYMPUS MAKES NO AND DISCLAIMS ALL OTHER REPRESENTATIONS, GUARANTIES, CONDITIONS, AND WARRANTIES CONCERNING THE PRODUCTS, WHETHER DIRECT OR INDIRECT, EXPRESS OR IMPLIED, OR ARISING UNDER ANY STATUTE, ORDINANCE, COMMERCIAL USAGE OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OR REPRESENTATION AS TO THE SUITABILITY, DURABILITY, DESIGN, OPERATION, OR CONDITON OF THE PRODUCTS (OR ANY PART THEREOF) OR THE MERCHANTABILITY OF THE PRODUCTS OR THEIR FITNESS FOR A PARTICULAR PURPOSE, OR RELATING TO THE INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER PROPRIETARY RIGHT USED OR INCLUDED THEREIN.
WHAT TO DO WHEN SERVICE IS NEEDED
The customer must transfer any image or other data saved on a Product to another image or data storage medium and/or remove any lm from the Product prior to sending the Product to Olympus for service. IN NO EVENT SHALL OLYMPUS BE RESPONSIBLE FOR SAVING, KEEPING OR MAINTAINING ANY IMAGE OR DATA SAVED ON A PRODUCT RECEIVED BY IT FOR SERVICE, OR ON ANY FILM CONTAINED WITHIN A PRODUCT RECEIVED BY IT FOR SERVICE, NOR SHALL OLYMPUS BE RESPONSIBLE FOR ANY DAMAGES IN THE EVENT ANY IMAGE OR DATA IS LOST OR IMPAIRED WHILE SERVICE IS BEING PERFORMED (INCLUDING, WITHOUT LIMITATION, DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, LOSS OF PROFITS OR LOSS OF USE), WHETHER OR NOT OLYMPUS SHALL BE OR SHOULD BE AWARE OF THE POSSIBILITY OF SUCH POTENTIAL LOSS OR IMPAIRMENT. Package the Product carefully using ample padding material to prevent damage in transit and either deliver it to the Authorized Olympus Dealer that sold you the Product or ship it postage prepaid and insured to any of our Olympus Service Centers. When returning Products for service, your package should include the following:
1 Sales receipt showing date and place of purchase. 2 Copy of this limited warranty bearing the Product serial number corresponding to the serial number on the Product (unless it is a model on which Olympus does not place and record serial numbers). 3 A detailed description of the problem. 4 Sample prints, negatives, digital prints (or les on disk) if available and related to the problem.