xD-Picture Card, microSD Card, F/3.5-6.5
These affordable models are sure to be a hit with users who want high image quality regardless of their budget. The 12-megapixel FE cameras boast up to 5x super wide optical zoom for great panorama shots or close-ups of distant subjects. The three top models look especially striking thanks to a double layered crystal shell finish. In addition, they all offer a practical AF tracking feature which ensures that even moving subjects are in focus at all times. Also on board are Advanced Face Detectio... Read more [ Report abuse or wrong photo | Share your Olympus FE-46 photo ]
Olympus FE-46 Digital Camera, size: 2.2 MB
Olympus FE-46 Fe-46 Manual De Instrues
Olympus FE-46 Fe-46 Manuel D'instructions
Olympus FE 46 12MP 5X Zoom Digital Camera with Case, 2GB.. ...
User reviews and opinions
|fontforge||10:16pm on Wednesday, November 3rd, 2010|
|out of focus picures random at best I will take the time to send it back and warn other people to think twice in its... My dad bought it for Christmas to replace our old Trust (3 megapixel) camera.|
|Llelan D.||1:10am on Wednesday, October 20th, 2010|
|Nice camera for the money. Not sure what some people were griping about in these reviews. I LIKE the small on/off switch. Very easy to use across all of the functions on the camera. Can use micro SD or XD memory cards.|
|assaf amir1||4:41am on Tuesday, September 28th, 2010|
|My experience with the Olympus FE-46 has been sweet and sour. We bought this camera right before Halloween.|
|labrat||8:31pm on Monday, August 9th, 2010|
|its truly a bad gift if i were you, i would not waste my money =( Easy to Use, Small / Compact Complicated Controls, Lag / Shutter Delay. You get what you pay for, an expensive throw away camera. The on and off button malfunctions frequently and is very small.|
|drouet||3:21pm on Thursday, July 22nd, 2010|
|Image Quality severely lacking I bought this camera 6 months ago for my wife, who needed a p&s to carry around for quick shots of the kids.|
|Deagle||7:49pm on Thursday, June 10th, 2010|
|nice camera So far we have enjoyed taking pictures with this camera, it has good zoom :)|
|razor7||5:01pm on Saturday, May 29th, 2010|
|I spent 6 days in Moab with this camera and I was very happy with it. I took over 300 pictures with it.|
|Radiosactive||5:18pm on Friday, April 16th, 2010|
|fast and good to click at random stuff... not as good as other models I have used two similar models of olympus cameras in the past which both had rechargable batteries.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
2009 -- -- -- -W T
SET OK 1
As in Steps 2 and 3, use klmn and the B button to set [M] (month), [D] (day), [TIME] (hours and minutes), and [Y/M/D] (date order).
For a more accurate setting, press the B button when the time signal hits 00 seconds. To change the date and time, adjust the setting from the menu. [X] (Date/time) (p. 31)
Changing the display language
The language for the menu and error messages displayed on the monitor is adjustable.
Press the m button, and press klmn to select [E] (SETUP).
Press the B button.
Use kl to select [W] and press the B button. Use klmn to select your language and press the B button. Press the m button.
Shooting, Playback, and Erasing
Shooting with the optimum aperture value and shutter speed (P mode)
In this mode, automatic shooting settings are activated while also allowing changes to a wide range of shooting menu functions such as exposure compensation, white balance, etc. as needed.
Hold the camera and compose the shot.
P mode indicator
When holding the camera, take care not to cover the ash with your ngers, etc.
Number of storable still pictures (p. 47) Monitor (standby mode screen)
Press the shutter button halfway down to focus on the subject.
When the camera focuses on the subject, the
exposure is locked (shutter speed and aperture value are displayed), and the AF target mark changes to green.
If P mode is not displayed, press the K button several times to select it.
Current shooting mode display
The camera was unable to focus if the AF target
mark ashes red. Try focusing again.
AF target mark
Press the n button again to turn off the camera.
Shutter speed Aperture value
Focusing (p. 43)
To take the picture, gently press the shutter button all the way down while being careful not to shake the camera.
Press the q button.
100-0001 2009.10.26 12:30
Image review screen
Number of frames Playback image
To view images during shooting
Pressing the q button enables playback of images. To return to shooting, either press the K button or press the shutter button halfway down.
Use klmn to select an image.
Displays next image
Displays 10 frames before the current image
To shoot movies
Shooting movies (A mode) (p. 18)
Displays previous image Displays 10 frames after the current image
The display size of the images can be changed. Index view and close-up view (p. 23)
To play back movies
Select a movie, and press the B button.
2009.10.26 12:30 100-0004 IN 4 MOVIE PLAY OK
The sound recorded in movie mode cannot be played back with this camera. To listen to the sound, connect to a TV or PC.
Operations during movie playback
Fast-forward: Press and hold down n. Rewind: Press and hold down m. Pause: Press the B button.
Erasing images during playback (Single image erase)
Press the D button when the image to be erased is displayed.
Elapsed time/ Total recording time
2009.10.26 12:30 100-0004 IN 00:12 /00:34
First (last) frame/frame advance: During pause, press k to display the rst frame, and press l to display the last frame. Press and hold down n to play a movie, and press and hold down m to play a movie in reverse. Press the B button to resume playback.
Press k to select [YES], and press the B button.
[K ERASE] (p. 29)
To stop movie playback
Press the m button.
Using Shooting Modes
The shooting mode changes in the order of P, G, h, s, A each time the K button is pressed. By switching to other shooting mode, most settings set in other than P mode will be changed to the default settings of the respective shooting mode.
When the subject is dark, noise reduction is automatically activated. This approximately doubles the shooting time during which no other pictures can be taken.
To take pictures of a moving subject like a pet ([ PET])
1 Use kl to select [ PET], and press the B button to set. 2 Hold the camera to align the AF target mark on the subject and press l.
Using the best mode for the shooting scene (s mode)
Press the K button a few times to set s.
When the camera recognizes the subject,
the AF target mark automatically tracks the subject movement to focus on it continuously. To focus on a moving subject continuously (AF Tracking) (p. 26).
Shooting with automatic settings (G mode)
An explanation of the selected mode is displayed
while the E button is pressed and held.
Use kl to select the best shooting mode for the scene, and press the B button.
Press in shooting mode. The monitor becomes brighter. If there is no operation for 10 seconds, the previous brightness resumes.
Press the Y button.
SET OK SELFTIMER
Use kl to select the desired setting option, and press the B button to set.
The self-timer is deactivated. The self-timer lamp turns on for approx. 10 seconds, then blinks for approx. 2 seconds, and then the picture is taken.
Self-timer shooting is automatically canceled after one shot.
To cancel the self-timer after it starts
Press the Y button again.
Changing the shooting information display
The display of the screen information can be changed to best match the situation, for example, the need for a clear view of the screen or for making a precise composition by using the grid display.
Using the FUNC menu
The FUNC menu provides the following menu functions that can be quickly accessed and set.
[WB] (p. 25) [ISO] (p. 25) [A IMAGE QUALITY] (p. 24)
WB AUTO ISO AUTO 12M
Press the g button.
The displayed shooting information changes in
the order shown below each time the button is pressed. Shooting mode display (p. 8)
AUTO 1 w x y
Use kl to select the menu function and mn to select the desired setting option, and then press the B button to set.
Using Playback Features
Index view and close-up view
Index view enables quick selection of a desired image. Close-up view (up to 10x magnication) allows checking of image details.
Changing the image information display
Shooting information settings displayed on the screen can be changed.
Press the zoom buttons.
The displayed image information changes in
the order shown below each time the button is pressed.
100-0004 2009.10.26 12:30
100-0004 IN 4
1/1000 F3.5 +2.0
To select an image in index view
Use klmn to select an image, and press the B button to display the selected image in single-image view.
Settings can be adjusted during image playback.
Playing back pictures automatically [G SLIDESHOW] G SLIDESHOW
To start a slideshow
After pressing the B button, the slideshow starts. To stop the slideshow, press the B button or the m button.
The sound recorded when shooting cannot be played back during slideshow. To listen to the sound, connect to a TV or PC.
Cropping image [P] I EDIT P
1 Use mn to select an image, and press the B button. 2 Use the zoom buttons to select the size of the cropping frame, and use klmn to move the frame.
Retouching images [H PERFECT FIX] H PERFECT FIX
Edited or retouched images cannot be retouched again. Depending on the picture, the editing may not be effective. The retouching process may lower the image resolution. Submenu 1
3 Press the B button.
The edited image will be saved as a separate
[LIGHTING FIX] and [REDEYE FIX] are applied together.
Protecting images  J PLAYBACK MENU 0
Protected images cannot be erased by [ERASE] (p. 16), [SEL. IMAGE], or [ALL ERASE] (p. 29), but all images are erased by [MEMORY FORMAT]/[FORMAT] (p. 30). Submenu 2
Only sections darkened by backlighting LIGHTING FIX and dim lighting are brightened. REDEYE FIX Eyes that are reddened by the ash are corrected.
Images can be erased. Images are protected so that they cannot be erased except by formatting of the internal memory/card.
1 Use kl to select a correction method, and press the B button. 2 Use mn to select an image for retouching, and press the B button.
The retouched image is saved as a separate
1 Use mn to select an image. 2 Use kl to select [ON]. 3 If necessary, repeat Steps 1 and 2 to protect other images, and press the B button.
Changing the image size [Q] I EDIT Q
C E 320 240
This saves a high-resolution image as a separate image with a smaller size for use in e-mail attachments and other applications.
Rotating images [y] J PLAYBACK MENU y
U +90 V 0 t 90
Erasing images [K ERASE] K ERASE
SEL. IMAGE ALL ERASE
Be sure to remove the card before formatting the internal memory.
Adjusting the CCD and the image processing function [PIXEL MAPPING] E SETUP PIXEL MAPPING
This function has already been adjusted at factory shipping, and no adjustment is needed right after purchase. Approximately once a year is recommended. For best results, wait at least one minute after taking or viewing pictures before performing pixel mapping. If the camera is turned off during pixel mapping, be sure to perform it again.
Copying images in the internal memory to the card [BACKUP] E SETUP BACKUP
Backs up image data in the internal memory to the card. Cancels the backup.
It takes some time to back up data. Check that the battery has sufcient power before starting the backup.
To adjust the CCD and the image processing function
Press the B button when [START] (Submenu 2) is displayed.
The camera checks and adjusts the CCD and the
image processing function at the same time.
Turning on the camera with the K or q button [K/q] E SETUP K/q
Pressing K turns on the camera and starts the camera in the shooting mode. Pressing q turns on the camera and starts the camera in the playback mode. The power is not turned on. To turn on the camera, press the n button.
Selecting the menu screen color and background [MENU COLOR] E SETUP MENU COLOR
NORMAL/ COLOR 1/ COLOR 2/ COLOR 3
Selects the menu screen color or background image according to your preference.
Setting the operation sound [BEEP] E SETUP BEEP
Turns off or on the operating sound/warning sound of the camera buttons.
Saving the mode when the camera is turned off [SAVE SETTINGS] E SETUP SAVE SETTINGS
The shooting mode is saved when the camera is turned off and is reactivated the next time the camera is turned on. The shooting mode is set to P mode when the camera is turned on.
Adjusting the brightness of the monitor [s] E SETUP s
Selects the monitor brightness depending on the surrounding brightness.
When set to [NO], all shooting settings, except for P mode, [A IMAGE QUALITY], and the selected s mode, return to default settings when the camera is turned off.
Setting the date and time [X] E SETUP X
Setting the date and time (p. 12)
To select the date display order
1 Press n after setting Minute, and use kl to select the date display order.
Selecting a video signal system to match your TV [VIDEO OUT] E SETUP VIDEO OUT
The TV video signal system varies depending on the countries and regions. Before viewing camera images on your TV, select the video output according to your TVs video signal type. Submenu 2
Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on. Connecting the camera to a TV in European countries, China, and so on.
The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TV
1 Connect the TV and camera.
Multi-connector Connect to the TV video input jack (yellow) and audio input jack (white).
AV cable (supplied)
2 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/ [PAL]). 3 Turn on the TV, and change INPUT to VIDEO (an input jack connected to the camera).
For details on changing the input source of the TV, refer to the TVs instruction manual.
4 Press the q button, and use klmn to select the image for playback.
Depending on the TVs settings, the displayed images and information may become cropped.
Saving battery power between shots [POWER SAVE] E SETUP POWER SAVE
Turning off the camera sounds [F SILENT MODE] F SILENT MODE
Cancels [POWER SAVE]. When the camera is not being used for approx. 10 seconds, the monitor automatically turns off to save battery power.
Button operation sound/warning sound are not muted. The electronic sounds (button operation sound, warning sound) are muted.
To resume standby mode
Press any button.
[BEEP] (p. 31)
Selecting the battery type [BATTERY TYPE] E SETUP BATTERY TYPE
Select this option when using alkaline batteries. Select this option when using NiMH batteries.
If [ALKALINE] is selected with NiMH batteries, the camera may fail to turn on when the batteries are low. If [NiMH] is selected with alkaline batteries, the camera may be turned off without displaying the low battery warning (p. 10).
Direct printing (PictBridge*1)
By connecting the camera to a PictBridgecompatible printer, you can print images directly without using a computer. To nd out if your printer supports PictBridge, refer to the printers instruction manual.
Turn on the printer, and then connect the printer and camera.
Multi-connector n button
PictBridge is a standard for connecting digital cameras and printers of different makers and printing out pictures directly.
The printing modes, paper sizes, and other parameters that can be set with the camera vary depending on the printer that is used. For details, refer to the printers instruction manual. For details on the available paper types, loading paper, and installing ink cassettes, refer to the printers instruction manual.
Shooting with ash in dark situations results in
an image with many ash reections on dust in the air.
Battery performance may have been reduced
temporarily due to low temperature. Take the batteries out of the camera, and warm them by putting them in your pocket for a while.
Date and time function
Date and time settings return to the default setting.
If the batteries are removed and left out of the
camera for about a day*2, the date and time settings return to the default setting, and must be reset. *2 The time until the date and time settings return to the default setting varies depending on how long the batteries have been loaded. Setting the date and time (p. 12)
An error message is displayed.
Error message (p. 42)
No picture is taken when the shutter button is pressed.
The camera makes a noise when taking pictures.
Cancel sleep mode.
To save battery power, the camera automatically goes into sleep mode and the monitor turns off if there is no operation for 3 minutes when the camera is turned on. No picture is taken even if the shutter button is fully pressed in this mode. Operate the zoom buttons or other buttons to restore the camera from sleep mode before taking a picture. If the camera is left for another 12 minutes, it automatically turns off. Press the n button to turn the camera on.
The camera may activate the lens and make a
noise even if no operation is performed. This is because the camera automatically performs actions of auto focus as far as it is ready to shoot.
Press the K button to set a shooting mode. Wait until #(ash charge) stops blinking before
When one of the messages below is displayed on the monitor, check the corrective action. Error message Corrective action
Card problem Insert a new card. Card problem Use a computer to cancel the read-only setting. Internal memory problem Insert a card. Erase unwanted images.*1 Card problem Replace the card. Erase unwanted images.*1 Card problem Use kl to select [CLEAN CARD], and press the B button. Take out the card, wipe the contact area (p. 46) with a soft, dry cloth, and then load the card again. Use kl to select [FORMAT], and press the B button. Next, use kl to select [YES], and press the B button.*2 Internal memory problem Use kl to select [MEMORY FORMAT], and press the B button. Next, use kl to select [YES], and press the B button.*2 Internal memory/Card problem Take pictures before viewing them. Problem with selected image Use photo retouch software, etc. to view the image on a computer. If the image still cannot be viewed, the image le is corrupted. Problem with selected image Use photo retouch software, etc. to edit the image on a computer. CARD-COVER OPEN g BATTERY EMPTY Operation problem Close the battery/card compartment cover. Battery problem Insert new batteries. If using rechargeable batteries, charge the batteries. Connection problem Connect the camera and computer or printer correctly. Printer problem Load paper into the printer.
A subject against backlight is brightened.
Taking pictures using exposure compensation
Object with no vertical lines*1
(p. 20) Adjust the brightness while viewing the screen for taking the picture. Normally, taking pictures of white subjects (such as snow) results in images that are darker than the actual subject. Use the F button to adjust in the positive (+) direction to express whites as they appear. When taking pictures of black subjects, on the other hand, it is effective to adjust in the negative (-) direction.
It is also effective to compose the shot by holding the camera vertically to focus, and then returning to the horizontal position to take the picture.
When objects are at different distances
Taking pictures with colors at the same shade as they appear
Playing images in the internal memory and card
Taking pictures by selecting [WB] (p. 25)
Best results in most environments can normally be obtained with the AUTO setting, but for some subjects, you should try experimenting with different settings. (This is especially true for sunshade under a clear sky, mixed natural and articial light settings, and so on.)
Remove the card when playing pictures in the
Loading the batteries and the xD-Picture
Card (sold separately) into the camera (p. 10)
Use of the ash is also effective for shooting under uorescent and other articial lighting.
Using the microSD card/microSDHC card
(sold separately) (p. 11)
Taking sharper pictures
Erasing the sound recorded to a still image
Taking pictures with the optical zoom
Avoid using digital zoom (p. 19) to take pictures.
Record over the sound with silence when
playing back the image Adding sound to still images [R] (p. 29)
Taking pictures at a low ISO sensitivity
If the picture is taken with a high ISO sensitivity, noise (small colored spots and color unevenness that were not in the original image) can occur, and the image can appear grainy. The resulting image is grainier than with low ISO sensitivity as well. [ISO] (p. 25)
Making batteries last longer
Avoid any of the following operations when not
actually taking pictures because they deplete the battery power
Repeatedly pressing the shutter button
Repeatedly using the zoom Set [POWER SAVE] (p. 33) to [ON]
Exterior Wipe gently with a soft cloth. If the camera is very dirty, soak the cloth in mild soapy water and wring well. Wipe the camera with the damp cloth and then dry it with a dry cloth. If you have used the camera at the beach, use a cloth soaked in clean water and wrung well. Monitor Wipe gently with a soft cloth. Lens Blow dust off the lens with a commercial blower, then wipe gently with a lens cleaner.
Disclaimer of Warranty
Olympus makes no representations or warranties, either expressed or implied, by or concerning any content of these written materials or software, and in no event shall be liable for any implied warranty of merchantability or tness for any particular purpose or for any consequential, incidental or indirect damages (including but not limited to damages for loss of business prots, business interruption and loss of business information) arising from the use or inability to use these written materials or software or equipment. Some countries do not allow the exclusion or limitation of liability for consequential or incidental damages or of the implied warranty, so the above limitations may not apply to you. Olympus reserves all rights to this manual.
Unauthorized photographing or use of copyrighted material may violate applicable copyright laws. Olympus assumes no responsibility for unauthorized photographing, use or other acts that infringe upon the rights of copyright owners.
Legal and Other Notices
Olympus makes no representations or warranties regarding any damages, or benet expected by using this unit lawfully, or any request from a third person, which are caused by the inappropriate use of this product. Olympus makes no representations or warranties regarding any damages or any benet expected by using this unit lawfully which are caused by erasing picture data.
All rights reserved. No part of these written materials or this software may be reproduced or used in any form or by any means, electronic or mechanical, including photocopying and recording or the use of any type of information storage and retrieval system, without the prior written permission of Olympus. No liability is assumed with respect to the use of the information contained in these written materials or software, or for damages resulting from the use of the information contained therein. Olympus reserves the right to alter the features and contents of this publication or software without obligation or advance notice.
Radio and Television Interference Changes or modications not expressly approved by the manufacturer may void the users authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Adjust or relocate the receiving antenna. Increase the distance between the camera and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult your dealer or an experienced radio/TV technician for help. Only the OLYMPUS-supplied USB cable should be used to connect the camera to USB enabled personal computers (PC).
For customers in North and South America
For customers in USA
Declaration of Conformity Model Number : FE-46/X-42/X-41 Trade Name : OLYMPUS Responsible Party : Address : 3500 Corporate Parkway, P.O. Box 610, Center Valley, PA 18034-0610, U.S.A. : 484-896-5000
Tested To Comply With FCC Standards FOR HOME OR OFFICE USE This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
For customers in Canada
This Class B digital apparatus meets all requirements of the Canadian InterferenceCausing Equipment Regulations.
Any unauthorized changes or modications to this equipment would void the users authority to operate it.
OLYMPUS WORLDWIDE LIMITED WARRANTY - IMAGING PRODUCTS
Olympus warrants that the enclosed Olympus imaging product(s) and related Olympus accessories (individually a Product and collectively the Products) will be free from defects in materials and workmanship under normal use and service for a period of one (1) year from the date of purchase. If any Product proves to be defective within the one-year warranty period, the customer must return the defective Product to any of Olympus Service Centers, following the procedure set forth below (See WHAT TO DO WHEN SERVICE IS NEEDED). Olympus, at its sole discretion, will repair, replace, or adjust the defective Product, provided that Olympus investigation and factory inspection disclose that (a) such defect developed under normal and proper use and (b) the Product is covered under this limited warranty. Repair, replacement, or adjustment of defective Products shall be Olympuss sole obligation and the customers sole remedy hereunder. The customer is liable and shall pay for shipment of the Products to the Olympus Service Center. Olympus shall not be obligated to perform preventive maintenance, installation, deinstallation, or maintenance. Olympus reserves the right to (i) use reconditioned, refurbished, and/or serviceable used parts (that meet Olympuss quality assurance standards) for warranty or any other repairs and (ii) make any internal or external design and/or feature changes on or to its products without any liability to incorporate such changes on or to the Products.
WHAT IS NOT COVERED BY THIS LIMITED WARRANTY
Excluded from this limited warranty and not warranted by Olympus in any fashion, either express, implied, or by statute, are:
(a) products and accessories not manufactured by Olympus and/or not bearing the OLYMPUS brand label (the warranty coverage for products and accessories of other manufacturers, which may be distributed by Olympus, is the responsibility of the manufacturers of such products and accessories in accordance with the terms and duration of such manufacturers warranties); (b) any Product which has been disassembled, repaired, tampered with, altered, changed, or modied by persons other than Olympuss own authorized service personnel unless repair by others is made with the written consent of Olympus; (c) defects or damage to the Products resulting from wear, tear, misuse, abuse, negligence, sand, liquids, impact, improper storage, nonperformance of scheduled operator and maintenance items, battery leakage, use of nonOLYMPUS brand accessories, consumables, or supplies, or use of the Products in combination with non-compatible devices; (d) software programs; (e) supplies and consumables (including but not limited to lamps, ink, paper, lm, prints, negatives, cables and batteries); and/or (f) Products which do not contain a validly placed and recorded Olympus serial number, unless they are a model on which Olympus does not place and record serial numbers.
EXCEPT FOR THE LIMITED WARRANTY SET FORTH ABOVE, OLYMPUS MAKES NO AND DISCLAIMS ALL OTHER REPRESENTATIONS, GUARANTIES, CONDITIONS, AND WARRANTIES CONCERNING THE PRODUCTS, WHETHER DIRECT OR INDIRECT, EXPRESS OR IMPLIED, OR ARISING UNDER ANY STATUTE, ORDINANCE, COMMERCIAL USAGE OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OR REPRESENTATION AS TO THE SUITABILITY, DURABILITY, DESIGN, OPERATION, OR CONDITON OF THE PRODUCTS (OR ANY PART THEREOF) OR THE MERCHANTABILITY OF THE PRODUCTS OR THEIR FITNESS FOR A PARTICULAR PURPOSE, OR RELATING TO THE INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER PROPRIETARY RIGHT USED OR INCLUDED THEREIN.
IF ANY IMPLIED WARRANTIES APPLY AS A MATTER OF LAW, THEY ARE LIMITED IN DURATION TO THE LENGTH OF THIS LIMITED WARRANTY. SOME STATES MAY NOT RECOGNIZE A DISCLAIMER OR LIMITATION OF WARRANTIES AND/OR LIMITATION OF LIABILITY SO THE ABOVE DISCLAIMERS AND EXCLUSIONS MAY NOT APPLY. THE CUSTOMER MAY ALSO HAVE DIFFERENT AND/OR ADDITIONAL RIGHTS AND REMEDIES THAT VARY FROM STATE TO STATE. THE CUSTOMER ACKNOWLEDGES AND AGREES THAT OLYMPUS SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES THAT THE CUSTOMER MAY INCUR FROM DELAYED SHIPMENT, PRODUCT FAILURE, PRODUCT DESIGN, SELECTION, OR PRODUCTION, IMAGE OR DATA LOSS OR IMPAIRMENT OR FROM ANY OTHER CAUSE, WHETHER LIABILITY IS ASSERTED IN CONTRACT, TORT (INCLUDING NEGLIGENCE AND STRICT PRODUCT LIABILITY) OR OTHERWISE. IN NO EVENT SHALL OLYMPUS BE LIABLE FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY KIND (INCLUDING WITHOUT LIMITATION LOSS OF PROFITS OR LOSS OF USE), WHETHER OR NOT OLYMPUS SHALL BE OR SHOULD BE AWARE OF THE POSSIBILITY OF SUCH POTENTIAL LOSS OR DAMAGE. Representations and warranties made by any person, including but not limited to dealers, representatives, salespersons, or agents of Olympus, which are inconsistent or in conict with or in addition to the terms of this limited warranty, shall not be binding upon Olympus unless reduced to writing and approved by an expressly authorized ofcer of Olympus. This limited warranty is the complete and exclusive statement of warranty which Olympus agrees to provide with respect to the Products and it shall supersede all prior and contemporaneous oral or written agreements, understandings, proposals, and communications pertaining to the subject matter hereof. This limited warranty is exclusively for the benet of the original customer and cannot be transferred or assigned.
Notes regarding Guarantee maintenance
1 This Guarantee will only be valid if the Guarantee Certicate is duly completed by Olympus or an authorized dealer or other documents contain sufcient proof. Therefore, please make sure that your name, the name of the dealer, the serial number and the year, month and date of purchase are all completed or the original invoice or the sales receipt (indicating the dealers name, the date of purchase and product type) is attached to this Guarantee Certicate. Olympus reserves the right to refuse free-of-charge service if neither Guarantee Certicate is completed nor the above document is attached or if the information contained in it is incomplete or illegible. 2 Since this Guarantee Certicate will not be reissued, keep it in a safe place. * Please refer to the list on the web site: http:// www.olympus.com for the authorized international Olympus service network.
IBM is a registered trademark of International Business Machines Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation. Macintosh is a trademark of Apple Inc. xD-Picture Card is a trademark. microSD is a trademark of the SD Association. All other company and product names are registered trademarks and/or trademarks of their respective owners. The standards for camera le systems referred to in this manual are the Design rule for Camera File system/DCF standards stipulated by the Japan Electronics and Information Technology Industries Association (JEITA).
Product type Recording system Still pictures Applicable standards Sound with still pictures Movie Memory : Digital recording, JPEG (in accordance with Design rule for Camera File system (DCF)) : Exif 2.2, Digital Print Order Format (DPOF), PRINT Image Matching III, PictBridge : Wave format : AVI Motion JPEG : Internal memory xD-Picture Card (16 MB to 2 GB) (TypeH/M/M+, Standard) microSD card/microSDHC card (when the supplied microSD Attachment is used.) : 11,860,000 pixels : 1/2.33 CCD (primary color lter), 12,700,000 pixels (gross) : Olympus lens 6.3 to 31.5 mm, f3.5 to 5.6 (equivalent to 36 to 180 mm on a 35 mm camera) : Digital ESP metering system : 4 to 1/2000 sec. : 0.6 m (2.0 ft.) to (W), 1.0 m (3.3 ft.) to 0.2 m (0.7 ft.) to (W), 0.6 m (2.0 ft.) to 0.03 m (0.1 ft.) to (super macro mode) : 2.7 TFT color LCD display, 230,000 dots : Multi-connector (USB connector, A/V OUT jack) : 2000 up to 2099 : 0 C to 40 C (32 F to 104 F) (operation) / -20 C to 60 C (-4 F to 140 F) (storage) : 30 % to 90 % (operation)/10 % to 90 % (storage) : AA alkaline / NiMH battery (two) : 98.0 mm (W) 61.6 mm (H) 27.8 mm (D) (3.9 2.4 1.1 in.) (excluding protrusions) : 128 g (4.5 oz) (excluding batteries and card) (T) (normal) (T) (macro mode) : Digital camera (for shooting and displaying)
No. of effective pixels Image pickup device Lens Photometric system Shutter speed Shooting range
Monitor Connector Automatic calendar system Operating environment Temperature Humidity Power supply Dimensions Weight
Product type Operating environment Temperature Humidity Dimensions Weight : -10 C to 40 C (14 F to 104 F) (operation) / -20 C to 65 C (-4 F to 149 F) (storage) : 95 % and below (operation) / 85 % and below (storage) : 25.0 mm (W) 20.3 mm (H) 1.7 mm (D) (1.0 0.8 0.07 in.) (Handle:2.2 mm (0.09 in.)) : Approx. 0.9 g (0.03 oz) : Attachment for microSD card
Design and specications subject to change without notice.
AF MODE.. 26 AF TRACKING.. 18, 26 Arrow pad.. 12 AV cable.. 32 ERASE K ALL ERASE.. 29 SEL. IMAGE.. 29 Single image erase.. 16 Error message.. 42
Backlight boost.. 21 BACKUP.. 30 Battery.. 10, 45 BATTERY TYPE.. 33 Beep... 31 Brightness Backlight boost.. 21 Exposure compensation.. 20 Monitor brightness s.. 31
FACE DETECT.. 26 Flash FILL IN.. 19 FLASH AUTO. 19 FLASH OFF.. 19 REDEYE.. 19 FORMAT.. 30 Frame rate.. 24 FUNC menu.. 22
Card microSD Card.. 11, 48 microSDHC card. 11, 48 xD-Picture Card.. 10, 46 Compression... 24 Connecting PC.. 39 Printer.. 34 TV.. 32 CUSTOM PRINT.. 35
G mode.. 17 iESP.. 26 IMAGE QUALITY A.. 24 Image size.. 24 Information display. 22, 23 Internal memory. 11, 46, 47 ISO sensitivity.. 25
Macro &.. 20 MAGIC FILTER Q.. 27 Maintenance Camera care.. 45 PIXEL MAPPING. 30 MEMORY FORMAT.. 30 MENU COLOR.. 31 microSD Attachment.. 11, 48
Date and time X.. 12, 31 DIS MODE h.. 18 Display language W. 13, 30
EASY PRINT.. 34 Edit (still images) Cropping P.. 28 Resize Q... 28
Natural color... 25
OLYMPUS Master 2.. 39 Operation guide. 12
VIDEO OUT.. 32
PANORAMA.. 26 PERFECT FIX H.. 28 PictBridge.. 34 Playback image Closeup view.. 23 Index view.. 23 Movies.. 15 On TV.. 32 Viewing images.. 15 P mode.. 14 POWER SAVE.. 33 Print.. 34 Print Reservations (DPOF). 37 Protecting images 0. 28
RESET D... 27 Rotating images y. 29
s mode.. 17 Self-timer... 21 Shooting.. 14 Shooting movies n.. 18 SILENT MODE F.. 33 SLIDESHOW G. 28 Sound recording R. 25, 29 SPOT.. 26 Strap... 10 SUPER MACRO %.. 20 SWITCH SHOOTING MODES C. 27
These affordable models are sure to be a hit with users who want high image quality regardless of their budget. The 12-megapixel FE cameras boast up to 5x super wide optical zoom for great panorama shots or close-ups of distant subjects. The three top models look especially striking thanks to a double layered crystal shell finish. In addition, they all offer a practical AF tracking feature which ensures that even moving subjects are in focus at all times. Also on board are Advanced Face Detection technology and the i-Auto mode, which automatically identifies five commonly-encountered types of scenes and adjusts settings accordingly. Two of the FEs even offers innovative Magic Filters for a new level of creativity.
|Product Type||Digital camera - compact|
|Enclosure Color||Light blue|
|Optical Sensor Type||CCD|
|Total Pixels||12,700,000 pixels|
|Effective Sensor Resolution||12,000,000 pixels|
|Optical Sensor Size||1/2.33"|
|Light Sensitivity||ISO auto, ISO 100-1600|
|Digital Zoom||4 x|
|Shooting Modes||Frame movie mode|
|Shooting Programs||Landscape, portrait mode, self-portrait, pet, fireworks, night scene, sports mode, sunset, indoor, cuisine, candle, night scene with portrait, anti shake, documents|
|Special Effects||Sketch, Wedding, Pop Art, Pin Hole|
|Max Shutter Speed||1/2000 sec|
|Min Shutter Speed||4 sec|
|Exposure Modes||Program, automatic|
|Exposure Compensation||±2 EV range, in 1/3 EV steps|
|White Balance||Automatic, presets|
|White Balance Presets||Sunlight, tungsten light, overcast, fluorescent light (cool white), fluorescent light (daylight), fluorescent light (warm white)|
|Digital Video Format||AVI, MJPEG|
|Still Image Format||JPEG|
|Video Capture||AVI - 640 x 480 - 30 fps AVI - 640 x 480 - 15 fps AVI - 320 x 240 - 30 fps|
|Memory / Storage|
|Supported Flash Memory||xD-Picture Card, microSD Card|
|Integrated Memory||19 MB|
|Image Storage||JPEG 3968 x 2976 JPEG 2560 x 1920 JPEG 2048 x 1536 JPEG 1600 x 1200 JPEG 1280 x 960 JPEG 640 x 480 JPEG 1920 x 1080|
|Camera Flash||Built-in flash|
|Flash Modes||Fill-in mode, auto mode, flash OFF mode, red-eye reduction|
|Red Eye Reduction||Yes|
|Effective Flash Range||4 in - 14 ft|
|Type||Zoom lens - 6.3 mm - 31.5 mm - f/3.5-6.5|
|Focal Length||6.3 mm - 31.5 mm|
|Focal Length Equivalent to 35mm Camera||36 - 180mm|
|Auto Focus||TTL contrast detection|
|Min Focus Range||23.6 in|
|Macro Focus Range||1 in|
|Optical Zoom||5 x|
|Zoom Adjustment||Motorized drive|
|Lens Construction||5 group(s) / 6 element(s)|
|Features||Built-in lens shield, aspherical lens|
|Self Timer Delay||12 sec|
|Additional Features||Direct print, USB 2.0 compatibility, RGB primary color filter, digital noise reduction, DPOF support, display brightness control, digital image rotation, PRINT Image Matching, PictBridge support, cropping an image, resizing an image, in-camera red-eye fix, Automatic Pixel Mapping (APM), face detection, in-camera lighting fix, YouTube capture mode, Exif Print support, Shadow Adjustment Technology|
|Type||LCD display - TFT active matrix - 2.7" - color|
|Display Form Factor||Built-in|
|Display Format||230,000 pixels|
|Type||Microphone - built-in|
|Microphone Technology||Electret condenser|
|Microphone Operation Mode||Mono|
|Connector Type||1 x USB 1 x composite video/audio output|
|Expansion Slot(s)||1 x xD-Picture Card|
|Software||Drivers & Utilities, Olympus Master 2|
|System Requirements for PC Connection|
|Operating System Support||MS Windows XP, MS Windows 2000, MS Windows Vista, Apple Mac OS X 10.3 - 10.5|
|Peripheral Devices||USB port, CD-ROM drive|
|Certified for Windows Vista||Certified for Windows Vista software and devices have undergone compatibility tests for ease-of-use, better performance and enhanced security.|
|Included Accessories||Wrist strap, microSD to XD adapter|
|Cables Included||USB cable A/V cable|
|Supported Battery Details||2 x AA ( included )|
|Min Operating Temperature||32 °F|
|Max Operating Temperature||104 °F|
|Universal Product Identifiers|
|Part Numbers||227100, FE-46 BLUE|
CLP-950-950M-950c-930 Inspiron 2650 F-110 SL-QD33 Desire DC C50 DEH-P8450MP Socket Gericom A380 GP-30 PSR36 EPL-5900 LA40A450 LT280 LE46C550 MDR-NC22 KX-TG2267 Square PRO SCH-M450 Review Cnet PLC-XU75 220-240V 1730 V DCR-SR42 Classic Kp10 230 S Director 8502 NGV DMC-LC5 42PF9986 P2015 EWS1000 Draft LE40M87 DR7400NP1M ICD-MX50 PRO X2 12mp Digital Camera Usb Cable Dvdr3440H FE-20 PRS-350 TH-50PX8E RX-CW200 RC-1400 EP-90 16 TRS 12mp Kart WII Orchestro 889 4060AF JP1010-00E CR200 MV-02HP Memory Card 12mp Digital Camera ZC2551B Sensor BAR LCD-plasma-IFC230 CDP-195 RC-20XL Samsung R730 LS-K2464HL GA-K8NS CDC A071 Daikin RK Humminbird 161 WF8500NHW PD-6006 M228WD-BZ KV-25X5A Iden I450 Replicator Manual Dect1221S-19 Yamaha RY8 KDL-55X4500 XP 600 CD 235 Hf Horn SU-X102 SC-DC171 29FS2RLX PT-310 AFM35 Software 50PC1RR ZTE135 LQ-630S DCR-TRV7 MH-1261MD MAX-DT55 21MF10C ES-GA21 CDM-500 12mp Digital Camera Black Piranhamax10 Kxtga750 GE872T-S DC 2300 Meter VRS-6200 HD4QN20RG RM185R WLA2-G54C Vision Converse 2200 P3 N
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101