G mode indicator The indicator changes to the icon for the shooting mode selected by the camera.
Use ab to select the best shooting mode for the scene, and press the o button.
Icon indicating the scene mode that is set
In s mode, the optimum shooting settings are pre-programmed for specic shooting scenes. For this reason, settings may not be changed in some modes. To change to another scene mode, use the menu. [C SWITCH SHOOTING MODES] (p. 27)
Press the shutter button halfway down or press the
g button to check which shooting mode the camera has automatically selected.
In some cases, the camera may not select the desired shooting mode. When the camera cannot identify which is the optimal mode, P mode will be selected.
book_oima_d4388_en.indb 17

2008/11/25 14:44:20

B PORTRAIT/ F LANDSCAPE/ G NIGHT SCENE*1/ M NIGHT+PORTRAIT/ C SPORT/ N INDOOR/ W CANDLE*1/ R SELF PORTAIT/ S SUNSET*1/ X FIREWORKS*1/ V CUISINE/ d DOCUMENTS/ T UNDERWATER SNAPSHOT

Application

Using the digital image stabilization mode (h mode)
This mode enables the user to reduce blurring that is caused by a camera shake and subject movement.
The camera takes a picture in the mode for the shooting scene.
Press the K button a few times to set h.

h mode indicator

When the subject is dark, noise reduction is automatically activated. This approximately doubles the shooting time, during which no other pictures can be taken.
To take underwater photos
Select [T UNDERWATER SNAPSHOT].
Important information about water resistant feature (p. 49)

Shooting movies (n mode)

Audio is recorded with the movie.
To lock the focus distance for an underwater shot (AF lock)
When [T UNDERWATER SNAPSHOT] is selected, press b.
Press the K button a few times to set n.

A mode indicator

^ mark
To cancel, press b again to clear the ^ mark.
To zoom while shooting a movie
While recording a movie with sound, only the digital zoom is available. To use the optical zoom, set [R] (movies) (p. 26) to [OFF].
book_oima_d4388_en.indb 18

2008/11/25 14:44:23

Press the shutter button halfway down to focus on the subject, and gently press the button all the way down to start recording.
Lights up red during recording
Remaining recording time (p. 48)
Gently press the shutter button all the way down to stop recording.
book_oima_d4388_en.indb 19

2008/11/25 14:44:26

Using Shooting Functions

Using the optical zoom

Pressing the zoom button adjusts the shooting range.

USB cable (supplied) Connector cover
Printing images at the printers standard settings [EASY PRINT]
EASY PRINT START PC / CUSTOM PRINT OK
Press d to start printing. To print another image, use cd to select an image, and press the o button.

To exit printing

After a selected image is displayed on the screen, disconnect the USB cable from the camera and printer.
Display the image to be printed on the monitor.
Viewing images (p. 15) Printing can also be started when the camera is turned off. After performing Step 2, use ab to select [EASY PRINT], press the o button. Use cd to select an image, and then press the o button to start printing.

PRINT OK

book_oima_d4388_en.indb 34

2008/11/25 14:44:55

Changing the printers settings for printing [CUSTOM PRINT]
Use ab to select [SIZE] (Submenu 3), and press d.
If the [PRINTPAPER] screen is not displayed, the [SIZE], [BORDERLESS] and [PICS/SHEET] are set to the printers standard.

PRINTPAPER

Follow Steps 1 and 2 for [EASY PRINT] (p. 34), then press the o button.

STANDARD

BORDERLESS
PC EASY PRINT CUSTOM PRINT EXIT

BACK SET OK

Use ab to select [CUSTOM PRINT], and press the o button. Use ab to select the print mode, and press the o button.

Submenu 2 Application

This prints the image selected in Step 6. This prints all images stored in the internal memory or card. This prints one image in a multiple layout format. This prints an index of all images stored in the internal memory or card. This prints images based on the print reservation data on the card.
Use ab to select the [BORDERLESS] or [PICS/SHEET] settings, and press the o button.

Submenu 4 Application

The image is printed with a border around it ([OFF]). The image is printed to ll the entire paper ([ON]). The number of images per sheet ([PICS/SHEET]) is selectable only when [MULTI PRINT] is selected in Step 3.
OFF/ON*1 (The number of images per sheet varies depending on the printer.)
PRINT ALL PRINT MULTI PRINT ALL INDEX PRINT ORDER*1

r THE IMAGE CANNOT BE EDITED

Corrective action

Problem with selected image Use photo retouch software, etc. to edit the image on a computer.

CARD ERROR

WRITE PROTECT
CARD-COVER OPEN g BATTERY EMPTY
Operation problem Close the battery/card compartment cover.
Battery problem Charge the battery. Connection problem Connect the camera and computer or printer correctly. Printer problem Load paper into the printer.

MEMORY FULL

CARD FULL

NO CONNECTION

NO PAPER

CARD SETUP

CLEAN CARD FORMAT SET OK
Printer problem Rell the ink in the printer. NO INK Printer problem Remove the jammed paper. Printer problem Return to the status where the printer can be used. Printer problem Turn off the camera and printer, check the printer for any problems, and then turn the power on again.
JAMMED SETTINGS CHANGED*3

MEMORY SETUP

POWER OFF MEMORY FORMAT SET OK

L NO PICTURE

PRINT ERROR
Problem with selected image r CANNOT PRINT*4 Use a computer to print.

r PICTURE ERROR

Before erasing important images, download them to a computer. All data will be erased. This is displayed, for instance, when the printers paper tray has been removed. Do not operate the printer while making the print settings on the camera. This camera may be unable to print images taken by other cameras.
book_oima_d4388_en.indb 43

2008/11/25 14:45:13

Shooting tips
When you are unsure of how to take a picture that you envision, refer to the information below.
When objects are at different distances

Focusing

Focusing on the subject
Taking a picture of a subject not in the center
of the screen After focusing on an object at the same distance as the subject, compose the shot, and take the picture. Pressing the shutter button halfway (p. 14) AF lock (p. 18)

Fast-moving object

The subject is not in the center of the frame
Taking a picture of subjects where autofocus
is difcult In the following cases, after focusing on an object (by pressing the shutter button halfway down) with high contrast at the same distance as the subject, compose the shot and take the picture.

Camera shake

Taking pictures without camera shake
Subjects with low contrast
Taking pictures using h mode (p. 18) Taking picture with [j SPORT] (p. 17)
Since you can take pictures with a high shutter speed by setting [j SPORT], its also effective for blurry subjects.
Taking pictures at a high ISO sensitivity
When extremely bright objects appear in the center of the screen
If a high ISO sensitivity is selected, pictures can be taken at a high shutter speed even at locations where a ash cannot be used. [ISO] (p. 25)

book_oima_d4388_en.indb 45

2008/11/25 14:45:17

Appendix

Camera care

Exterior Wipe gently with a soft cloth. If the camera is very dirty, soak the cloth in mild soapy water and wring well. Wipe the camera with the damp cloth and then dry it with a dry cloth. If you have used the camera at the beach, use a cloth soaked in clean water and wrung well. If any dirt, dust, sand, or other foreign material adheres to the periphery of the lens cover after use, or the lens cover does not move smoothly, wash the camera using the method described on P. 50. Monitor Wipe gently with a soft cloth. Lens Blow dust off the lens with a commercial blower, then wipe gently with a lens cleaner. Battery/Charger Wipe gently with a soft, dry cloth.
Do not use strong solvents such as benzene or alcohol, or chemically treated cloth. Mold may form on the lens surface if the lens is left dirty.

Battery and charger

This camera uses one Olympus lithium ion battery (LI-42B/LI-40B). No other type of batteries can be used. CAUTION
There is a risk of explosion if the battery is replaced with the incorrect battery type. Dispose of the used battery following the instructions (p. 54).

Storage

When storing the camera for extended periods, remove the battery, AC adapter and card, and keep in a cool, dry place that is well ventilated. Periodically insert the battery and test the camera functions.
Avoid leaving the camera in places where chemical products are handled since this may result in corrosion.
Power consumption by the camera varies depending on which functions are used. During the conditions described below, power is consumed continuously and the battery becomes exhausted quickly. The zoom is used repeatedly. The shutter button is pressed halfway repeatedly in shooting mode, activating the auto focus. A picture is displayed on the monitor for an extended period of time. The camera is connected to a computer or printer. Using an exhausted battery may cause the camera to turn off without displaying the battery level warning. The rechargeable battery is not fully charged at the time of purchase. Charge the battery fully with the LI-41C/LI-40C charger before use. The provided rechargeable battery usually takes approximately 2 hours to charge (varies with usage). The supplied LI-41C battery charger is used only for LI-42B/LI-40B battery. Do not charge other type of battery with the supplied battery charger. It might cause explosion, leaking, overheating or re. For plug-in type battery charger: This power unit is intended to be correctly orientated in a vertical or oor mount position.

Card access lamp

Number of storable pictures (still pictures)/continuous recording length (movies) in the internal memory and xD-Picture Card Still pictures

COMPRESSION

L M L M L M L M L M L M L M

IMAGE SIZE

Internal memory With sound 12 23

F H I J K C D

19201080
Number of storable still pictures Using a 1GB card (xD-Picture Card) Without sound With sound Without sound 1640 1728

FRAME RATE

N O N O
Internal memory With sound 7 sec. 15 sec. 21 sec. 41 sec.

640480 320240

Continuous recording length Using a 1 GB card (xD-Picture Card) Without sound With sound Without sound 7 sec. 9 min. 00 sec.* 9 min. 05 sec.* 15 sec. 17 min. 48 sec. 18 min. 11 sec. 22 sec. 24 min. 43 sec. 25 min. 28 sec. 44 sec. 48 min. 04 sec. 50 min. 56 sec.
The maximum le size of a single movie is 2 GB, regardless of the capacity of the card. * The maximum length is 10 seconds when using a TypeM or Standard xD-Picture Card.
book_oima_d4388_en.indb 48

2008/11/25 14:45:22

Increasing the number of pictures that can be taken
Either erase unwanted images, or connect the camera to a computer or other device to save the images, and then erase the images in the internal memory or card. [ERASE] (p. 16), [SEL. IMAGE] (p. 30), [ALL ERASE] (p. 30), [MEMORY FORMAT]/ [FORMAT] (p. 31)
Important information about water resistant feature
The waterproof feature is warranted*1 to operate at depths up to 3 m (9.8 feet) for up to one hour. The waterproof feature may be compromised if the camera is subject to substantial or excessive impact. As with any electronic device, proper care and maintenance are required to preserve the integrity and operation of your camera. To maintain camera performance, please take your camera to the nearest Olympus Authorized Service Center to have it inspected after any major impact. In the event the camera is damaged as a result of negligence or misuse, the warranty will not cover costs associated with the service or repair of your camera. For additional information on our warranty, please visit to the Olympus website for your local area. Please observe the following care instructions for your camera.
*1 As determined by Olympus pressure testing equipment in accordance with IEC Standard Publication 529 IPX8 - This means that the camera can be used normally under water at a specied water pressure.
Using a microSD Attachment
Do not use the attachment with Olympus digital cameras that do not support this microSD Attachment, as well as with other brands of digital cameras, computers, printers, and other devices that support xD-Picture Card. Doing so not only may damage the pictures taken, but may also result in the malfunction of the device. If the microSD card cannot be removed, do not use force. Contact authorized distributors/service centers.

microSD card/microSDHC card
For a list of tested microSD cards, please visit our website (http://www.olympus.com/).

Before Use:

Check the camera for foreign material including dirt, dust or sand. Be sure to close the battery/card compartment cover and connector cover rmly so that each lock makes clicking sound. Do not open the battery/card compartment cover and connector cover with wet hands, while under water, or in a damp or dusty environment (e.g. beach).

Sending images

You can send images to a computer or PictBridge-compatible printer by using the USB cable provided with the camera. To send data to other devices, remove the attachment from the camera and use a commercially available microSD card adapter.

Handling precautions

Do not touch the contact area of the attachment or microSD card. Doing so may cause failure in reading the images. When ngerprints or stains are found on the contact area, wipe the area with a soft dry cloth.
book_oima_d4388_en.indb 49

2008/11/25 14:45:24

After Use:
Be sure to wipe off any excess water or debris after using the camera under water. After the camera is used under seawater, immerse the camera in a bucket containing fresh water for about 10 minutes (with the battery/card compartment cover and connector cover rmly closed). After that, dry the camera in a shade with good ventilation. Water drops may be observed on the inner surface of the battery/card compartment cover or connector cover after you open each cover. If any water drops are found, be sure to wipe them off before using the camera.
Follow Steps 1 to 4, then check if the lens cover moves smoothly. If the lens cover does not move smoothly, rinse the lens face by placing it directly under a strong stream of tap water and pressing the n button repeatedly.

Notes after use

Any foreign material may be adhered to the periphery of the lens cover, after you use the camera in an environment containing foreign material including dirt, dust or sand, or when the lens cover wont move smoothly. If you continue to use the camera in such a condition, the lens may be damaged or the lens cover may become stuck, causing a failure. To avoid such a failure, wash the camera using the following method. 1 Insert the battery and close the battery/ card compartment cover and connector cover rmly so that each lock makes the clicking sound. 2 Fill a bucket with fresh water, immerse the camera in the bucket with the lens surface downward and shake the camera thoroughly. 3 Press the n button several times in the water and close/open the lens cover repeatedly. 4 Furthermore, shake the camera further with the cover opened.

Storage and Maintenance

Do not leave the camera in an environment at high temperature (40C (104F) or more) or at low temperature (0C (32F) or less). Failure to do so may break down water resistance. Do not use chemicals for cleaning, rust prevention, anti-fogging, repairing, etc. Failure to do so may break down water resistance. Do not leave the camera in water for a long time. Failure to do so will cause damage to the cameras appearance and/or deteriorate water resistance. In order to preserve the water resistant feature, as with any underwater housing, it is recommended that the waterproof packing (and seals) are replaced annually. For the Olympus distributors or service stations where the waterproof packing can be replaced, visit Olympus website for your local area.
book_oima_d4388_en.indb 50

2008/11/25 14:45:25

Closing Battery/card compartment cover and Connector cover

SAFETY PRECAUTIONS

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED OLYMPUS SERVICE PERSONNEL. An exclamation mark enclosed in a triangle alerts you to important operating and maintenance instructions in the documentation provided with the product. If the product is used without observing the information given under this symbol, serious injury or death may result. If the product is used without observing the information given under this symbol, injury or death may result. If the product is used without observing the information given under this symbol, minor personal injury, damage to the equipment, or loss of valuable data may result.

DANGER

WARNING

Connector cover

WARNING! TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK, NEVER DISASSEMBLE, EXPOSE THIS PRODUCT TO WATER OR OPERATE IN A HIGH HUMIDITY ENVIRONMENT.
The included accessories (e.g. charger) do not offer shock or water resistance.

General Precautions

Read All Instructions Before you use the product, read all operating instructions. Save all manuals and documentation for future reference. Cleaning Always unplug this product from the wall outlet before cleaning. Use only a damp cloth for cleaning. Never use any type of liquid or aerosol cleaner, or any type of organic solvent to clean this product. Attachments For your safety, and to avoid damaging the product, use only accessories recommended by Olympus. Water and Moisture For precautions on products with weatherproof designs, read the weatherproong sections. Location To avoid damage to the product, mount the product securely on a stable tripod, stand, or bracket. Power Source Connect this product only to the power source described on the product label. Lightning If a lightning storm occurs while using an AC adapter, remove it from the wall outlet immediately. Foreign Objects To avoid personal injury, never insert a metal object into the product. Heat Never use or store this product near any heat source such as a radiator, heat register, stove, or any type of equipment or appliance that generates heat, including stereo ampliers.

book_oima_d4388_en.indb 51

2008/11/25 14:45:26

Handling the Camera
Do not use the camera near ammable or explosive gases. Do not use the ash and LED on people (infants, small children, etc.) at close range. You must be at least 1 m (3 ft.) away from the faces of your subjects. Firing the ash too close to the subjects eyes could cause a momentary loss of vision. Keep young children and infants away from the camera. Always use and store the camera out of the reach of young children and infants to prevent the following dangerous situations which could cause serious injury: Becoming entangled in the camera strap, causing strangulation. Accidentally swallowing the battery, cards or other small parts. Accidentally ring the ash into their own eyes or those of another child. Accidentally being injured by the moving parts of the camera. Do not look at the sun or strong lights with the camera. Do not use or store the camera in dusty or humid places. Do not cover the ash with a hand while ring. Do not insert anything into the microSD Attachment other than the microSD card. This attachment is exclusive for use of microSD cards only. Other types of cards cannot be installed. Do not insert anything other than an xD-Picture Card or the microSD Attachment into the camera. If you insert a card by mistake, such as a microSD card, do not use force. Contact authorized distributors/service centers.
Stop using the camera immediately if you notice any unusual odors, noise, or smoke around it. Never remove the batteries with bare hands, which may cause a re or burn your hands. Do not leave the camera in places where it may be subject to extremely high temperatures. Doing so may cause parts to deteriorate and, in some circumstances, cause the camera to catch re. Do not use the charger or AC adapter if it is covered (such as a blanket). This could cause overheating, resulting in re. Handle the camera with care to avoid getting a low-temperature burn. When the camera contains metal parts, overheating can result in a low-temperature burn. Pay attention to the following: When used for a long period, the camera will get hot. If you hold on to the camera in this state, a low-temperature burn may be caused. In places subject to extremely cold temperatures, the temperature of the cameras body may be lower than the environmental temperature. If possible, wear gloves when handling the camera in cold temperatures. Be careful with the strap. Be careful with the strap when you carry the camera. It could easily catch on stray objects and cause serious damage.
book_oima_d4388_en.indb 52

2008/11/25 14:45:27

Battery Handling Precautions
Follow these important guidelines to prevent batteries from leaking, overheating, burning, exploding, or causing electrical shocks or burns. DANGER

Keep batteries dry at all times. To prevent batteries from leaking, overheating, or causing a re or explosion, use only batteries recommended for use with this product. Insert the battery carefully as described in the operating instructions. If rechargeable batteries have not been recharged within the specied time, stop charging them and do not use them. Do not use a battery if it is cracked or broken. If a battery leaks, becomes discolored or deformed, or becomes abnormal in any other way during operation, stop using the camera. If a battery leaks uid onto your clothing or skin, remove the clothing and ush the affected area with clean, running cold water immediately. If the uid burns your skin, seek medical attention immediately. Never subject batteries to strong shocks or continuous vibration.
book_oima_d4388_en.indb 53

2008/11/25 14:45:28

This camera uses a lithium ion battery specied by Olympus. Do not use any other type of battery. If the batterys terminals get wet or greasy, camera contact failure may result. Wipe the battery well with a dry cloth before use. Always charge a battery when using it for the rst time, or if it has not been used for a long period. When operating the camera with battery power at low temperatures, try to keep the camera and spare battery as warm as possible. A battery that has run down at low temperatures may be restored after it is warmed at room temperature. The number of pictures you can take may vary depending on the shooting conditions or battery. Before going on a long trip, and especially before traveling abroad, purchase extra batteries. A recommended battery may be difcult to obtain while traveling. Please recycle batteries to help save our planets resources. When you throw away dead batteries, be sure to cover their terminals and always observe local laws and regulations.

LCD Monitor

Do not push the monitor forcibly; otherwise the image may become vague, resulting in a playback mode failure or damage to the monitor. A strip of light may appear on the top/bottom of the monitor, but this is not a malfunction. When a subject is viewed diagonally in the camera, the edges may appear zigzagged on the monitor. This is not a malfunction; it will be less noticeable in playback mode. In places subject to low temperatures, the LCD monitor may take a long time to turn on or its color may change temporarily. When using the camera in extremely cold places, it is a good idea to occasionally place it in a warm place. An LCD monitor exhibiting poor performance due to low temperatures will recover in normal temperatures. The LCD used for the monitor is made with high-precision technology. However, black spots or bright spots of light may appear constantly on the LCD monitor. Due to its characteristics or the angle at which you are viewing the monitor, the spot may not be uniform in color and brightness. This is not a malfunction.

Telephone Number

Tested To Comply With FCC Standards FOR HOME OR OFFICE USE This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

For customers in Canada

This Class B digital apparatus meets all requirements of the Canadian InterferenceCausing Equipment Regulations.
Use Only Dedicated Rechargeable Battery and Battery Charger
We strongly recommend that you use only the genuine Olympus dedicated rechargeable battery and battery charger with this camera. Using a non-genuine rechargeable battery and/or battery charger may result in re or personal injury due to leakage, heating, ignition or damage to the battery. Olympus does not assume any liability for accidents or damage that may result from the use of a battery and/or battery charger that are not genuine Olympus accessories.
book_oima_d4388_en.indb 57

2008/11/25 14:45:33

WHAT IS NOT COVERED BY THIS LIMITED WARRANTY
Excluded from this limited warranty and not warranted by Olympus in any fashion, either express, implied, or by statute, are:
(a) products and accessories not manufactured by Olympus and/or not bearing the OLYMPUS brand label (the warranty coverage for products and accessories of other manufacturers, which may be distributed by Olympus, is the responsibility of the manufacturers of such products and accessories in accordance with the terms and duration of such manufacturers warranties); (b) any Product which has been disassembled, repaired, tampered with, altered, changed, or modied by persons other than Olympuss own authorized service personnel unless repair by others is made with the written consent of Olympus; (c) defects or damage to the Products resulting from wear, tear, misuse, abuse, negligence, sand, liquids, impact, improper storage, nonperformance of scheduled operator and maintenance items, battery leakage, use of nonOLYMPUS brand accessories, consumables, or supplies, or use of the Products in combination with non-compatible devices; (d) software programs; (e) supplies and consumables (including but not limited to lamps, ink, paper, lm, prints, negatives, cables and batteries); and/or (f) Products which do not contain a validly placed and recorded Olympus serial number, unless they are a model on which Olympus does not place and record serial numbers.

1 Sales receipt showing date and place of purchase. 2 Copy of this limited warranty bearing the Product serial number corresponding to the serial number on the Product (unless it is a model on which Olympus does not place and record serial numbers). 3 A detailed description of the problem. 4 Sample prints, negatives, digital prints (or les on disk) if available and related to the problem.

Trademarks

IBM is a registered trademark of International Business Machines Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation. Macintosh is a trademark of Apple Inc. xD-Picture Card is a trademark. microSD is a trademark of the SD Association. All other company and product names are registered trademarks and/or trademarks of their respective owners. The standards for camera le systems referred to in this manual are the Design rule for Camera File system/DCF standards stipulated by the Japan Electronics and Information Technology Industries Association (JEITA).
When service is completed, the Product will be returned to you postage prepaid.
WHERE TO SEND PRODUCT FOR SERVICE
See WORLDWIDE WARRANTY for the nearest service center.
INTERNATIONAL WARRANTY SERVICE
International warranty service is available under this warranty.
book_oima_d4388_en.indb 59

SPECIFICATIONS

Camera
Product type Recording system Still pictures Applicable standards : Digital recording, JPEG (in accordance with Design rule for Camera File system (DCF)) : Exif 2.2, Digital Print Order Format (DPOF), PRINT Image Matching III, PictBridge : AVI Motion JPEG : Internal memory xD-Picture Card (16 MB to 2 GB) (TypeH/M/M+, Standard) microSD card/microSDHC card (with the supplied microSD Attachment) : 9,980,000 pixels : 1/2.33 CCD (primary color lter), 10,700,000 pixels (gross) : Olympus lens 6.7 to 20.1 mm, f3.5 to 5.0 (equivalent to 38 to 114 mm on a 35mm camera) : Digital ESP metering system : 4 to 1/1000 sec. : 0.5 m (1.6 ft.) to ) (W/T) (normal) 0.2 m (0.7 ft.) to ) (W), 0.3 m (1.0 ft.) to ) (T) (macro mode) 0.07 m (2.8 in.) to ) (W only) (super macro mode) : 2.5 TFT color LCD display, 230,000 dots : Multi-connector (DC-IN jack USB connector, A/V OUT jack) : 2000 up to 2099 : Equivalent to IEC Standard publication 529 IPX8 (under OLYMPUS test conditions), available in 3 m (9.8 feet) deep water : Camera can normally be used under water at a specied water pressure. : 0 C to 40 C (32 F to 104 F) (operation)/ -20 C to 60 C (-4 F to 140 F) (storage) : 30 % to 90 % (operation)/10 % to 90 % (storage) : One Olympus lithium ion battery (LI-42B/LI-40B) or Olympus AC adapter : 93.6 mm (W) 61.7 mm (H) 21.5 mm (D) (3.7 2.4 0.8 in.) (excluding protrusions) : 127 g (4.5 oz) (excluding battery and card) : Digital camera (for shooting and displaying)

CAMERA MENU B.. 25 Card.. 11, 12, 47 Close-up view U.. 23 Cloudy day 3.. 25 COLOR 1/2/3.. 32 COMPRESSION.. 24 Connection To Computer.. 40 To Printer.. 34 To Television.. 33 Cropping a picture P.. 28, 36 CUSTOM PRINT.. 35
IMAGE QUALITY A.. 24 IMAGE SIZE... 24 Index view G.. 23 Information displays. 22, 23 Internal memory.. 11, 47 ISO... 25
DATE (X).. 38 DATE (PRINT INFO).. 36 Date and time X. 13, 32 Digital image stabilization mode (DIS MODE) h.. 18 DIGITAL ZOOM. 25 Direct printing.. 34 Display language W. 13, 31 DPOF.. 37
LIGHTING FIX.. 28 Lithium ion battery.. 2
book_oima_d4388_en.indb 62

2008/11/25 14:45:38

MACRO &.. 21 Macro mode &.. 21 MEMORY FORMAT.. 31 Menu.. 3 MENU COLOR.. 32 Menu guide.. 3 microSD Attachment.. 12, 49 microSD card.. 12, 49 microSDHC card.. 12, 49 Monitor brightness adjustment s. 32 MULTI PRINT.. 35
REDEYE !.. 20 REDEYE FIX.. 28 RESET D... 27 Resizing Q... 28
SAVE SETTINGS.. 32 s (Scene).. 17 SELFTIMER Y.. 21 SETUP E.. 31 Shooting mode.. 14 Shooting movies (MOVIE) n.. 18 Shooting still pictures (Full auto mode) G. 17 Shooting still pictures P. 14 SILENT MODE F.. 33 Single-frame print reservation <. 37 SLIDESHOW G.. 28 Sound recording Adding sound to still pictures R. 29 Recording sound with movie R. 26 Recording sound with still pictures R... 26 Strap.. 2, 10 Sunny day 5.. 25 SUPER MACRO %.. 21 SWITCH SHOOTING MODES C. 27
NO (X).. 38 NORMAL... 24 NORMAL (MENU COLOR). 32 NTSC.. 33 Number of prints <x.. 36
OLYMPUS Master.. 2, 40 Optical zoom... 20
PAL.. 33 PANORAMA... 26 PC.. 40 PERFECT FIX H.. 28 PictBridge.. 34 Picture rotation y.. 29 PIXEL MAPPING.. 31 PLAYBACK MENU J.. 29 Playback mode q. 15 Playback on a TV.. 33 Power on K/q.. 31 POWER SAVE.. 33 PRINT ORDER L. 30, 37 PRINT ORDER (PRINT SELECT MODE). 37 Print reservations.. 37 Printing pictures. 34 Protect 0.. 29
TIME (X).. 38 Top menu.. 5 Tungsten light 1.. 25 Turn the camera on. 13, 14

USB cable.. 2, 34, 40

VIDEO OUT.. 33
book_oima_d4388_en.indb 63

2008/11/25 14:45:39

White balance WB.. 25

xD-Picture Card.. 11, 47

Zoom... 20
book_oima_d4388_en.indb 64

2008/11/25 14:45:40

book_oima_d4388_en.indb 65
book_oima_d4388_en.indb 66

2008/11/25 14:45:41