Reviews & Opinions
Independent and trusted. Read before buy Onkyo CR-305TX!

Onkyo CR-305TX

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Onkyo CR-305TX, size: 1.3 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Onkyo CR-305TXAbout Onkyo CR-305TX
Here you can find all about Onkyo CR-305TX like review and other informations. For example: .

Onkyo CR-305TX manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Onkyo CR-305TX please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Onkyo CR-305TX photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 2. Page 1 of 1. Average Rating:
pefix 9:01pm on Saturday, June 26th, 2010 
Perfect shelf system I purchased this stereo to simply play music in my living room.
Khad 6:37pm on Wednesday, May 19th, 2010 
for 149 this has to be the best in the shop for clarity of music sound! Onkyo CS210MK11 Hi-Fi Micro Sys is a Great little machine, looks the part when placed in the living room, easy to setup and get going.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Contents

Before using

CD Receiver

CR-305TX

Instruction Manual

Important Safeguards.. 2 Precautions.. 3 Features.. 4 Supplied accessories. 5 Before operating this unit. 5

Preparation

Audio equipment connections. 6 Connecting speaker systems. 8 Connecting the AC power cord (mains lead).. 9 Making antenna connections. 10 Control positions and names.. 12 Remote controller RC-421S. 13

Operation

Setting the clock.. 14 Choosing the required source. 16 Adjusting the sound.. 16 Muting / Listening with the headphones.. 17 Playing a CD.. 18 Receiving stations. 22 Using the timer. 26
Thank you for purchasing the Onkyo CD Receiver. Please read this manual thoroughly before making connections and turning on the power. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new CD Receiver. Please retain this manual for future reference.

Appendix

Troubleshooting.. 32 Specifications.. 34

Control guide

Using the remote controller. 35

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

WARNING

RISK OF ELECTRIC SHOCK DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Important Safeguards

1. Read Instructions All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Heed Warnings All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions All operating and use instructions should be followed. 5. Cleaning Unplug the appliance from the wall outlet before cleaning. The appliance should be cleaned only as recommended by the manufacturer. 6. Attachments Do not use attachments not recommended by the appliance manufacturer as they may cause hazards. 7. Water and Moisture Do not use the appliance near water for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. 8. Accessories Do not place the appliance on an unstable cart, stand, tripod, bracket, or table. The appliance may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the appliance. Any mounting of the appliance should follow the PORTABLE CART WARNING manufacturers instructions, and should use a mounting accessory recommended by the manufacturer. 9. An appliance and cart combination should be moved with care. Quick stops, excessive force, S3125A and uneven surfaces may cause the appliance and cart combination to overturn. 10. Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the appliance and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the appliance on a bed, sofa, rug, or other similar surface. The appliance should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. There should be free space of at least 20 cm (8 in.) and an opening behind the appliance. 11. Power Sources The appliance should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. 12. Grounding or Polarization The appliance may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 13. Power-Cord Protection Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 14. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the appliance, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna-discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure 1. 15. Lightning For added protection for the appliance during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the appliance due to lightning and power-line surges. 16. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 17. Overloading Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 18. Object and Liquid Entry Never push objects of any kind into the appliance through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the appliance. 19. Servicing Do not attempt to service the appliance yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 20. Damage Requiring Service Unplug the appliance form the wall outlet and refer servicing to qualified service personnel under the following conditions: A. When the power-supply cord or plug is damaged, B. If liquid has been spilled, or objects have fallen into the appliance, C. If the appliance has been exposed to rain or water, D. If the appliance does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the appliance to its normal operation, E. If the appliance has been dropped or damaged in any way, and F. When the appliance exhibits a distinct change in performance this indicates a need for service.

CLASS 1 LASER PRODUCT
This label on the right side of the panel states that: 1. This unit is a CLASS 1 LASER PRODUCT and employs a laser inside the cabinet. 2. To prevent the laser from being exposed, do not remove the cover. Refer servicing to qualified personnel.
BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY. The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (e.g., AC 120 V, 60 Hz) written on the rear panel. Setting the STANDBY/ON button to standby does not shut off the power completely. So the power cord should be removed from the AC outlet when the unit is not used for a prolonged time. 5. Do not touch this unit with wet hands Do not handle this unit or power cord when your hands are wet or damp. If water or any other liquid enters the case, take this unit to an authorized service center for inspection. 6. Location of this unit Place this unit in a well-ventilated location. Take special care to provide plenty of ventilation on all sides of this unit especially when it is placed in an audio rack. If ventilation is blocked, this unit may overheat and malfunction. Do not expose this unit to direct sunlight or heating units as this unit's internal temperature may rise and shorten the life of the pickup. Avoid damp and dusty places and places directly affected by vibrations from the speakers. In particular, avoid placing the unit on or above one of the speakers. Be sure this unit is placed in a horizontal position. Never place it on its side or on a slanted surface as it may malfunction. Do not place near tuners or TV sets. If placed next to a TV or tuner, it may cause reception interference resulting in some noise in the TV or tuner output. 7. Points to remember If this unit is brought from a cold environment to a warm one or is in a cold room that is quickly heated, condensation may form on the pickup, preventing proper operation. In this case, remove the disc and leave the power ON for about one hour to remove the condensation. When transporting this unit, be careful not to bump it.
Declaration of Conformity
We, ONKYO EUROPE ELECTRONICS GmbH INDUSTRIESTRASSE GERMERING, GERMANY declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding technical standards such as EN60065, EN55013, EN55020 and EN61000-3-2, -3-3. GERMERING, GERMANY

I. MORI

ONKYO EUROPE ELECTRONICS GmbH

For U.S. model

The laser is covered by a housing which prevents exposure during operation or maintenance. However, this product is classified as a Laser Product by CDRH (Center for Devices and Radiological Health) which is a department of the Food and Drug Administration. According to their regulations 21 CFR section 1002.30, all manufactures who sell Laser Products must maintain records of written communications between the manufacturer, dealers and customers concerning radiation safety. If you have any complaints about instructions or explanations affecting the use of this product, please feel free to write to the address on the back page of this manual. When you write us, please include the model number and serial number of your unit. In compliance with Federal Regulations, the certification, identification and the period of manufacture are indicated on the rear panel. FCC Information for User

IMPORTANT

A 5 ampere fuse is fitted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating of 5 amps and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark or the BSI mark on the body of the fuse. IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13 AMPERE SOCKET. If in any doubt, please consult a qualified electrician.
The user changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Note to CATV system installer: This reminder is provided to call the CATV system installers attention to Section 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

Features

I watts min RMS at 4 ohms, 1 kHz no more than 1.0 % THD (FTC rating) I watts at 4 ohms, 1 kHz, DIN I watts at 4 ohms, EIAJ I 4-Ohm Drive capability I High-Grade Discrete Outputs Stage Circuits I Brushed Aluminium Front Panel I 4-step Acoustic Presence control I Illuminated Volume knob I Optical Digital Output I Full-Function Remote Control U.S. & Canadian models I Subwoofer Preout I CDR and Tape Inputs/Outputs European and Asian models I Auto Digital Level Adjustment for Synchro-Recording (When connected to MD-105X/TX or CDR-205X/TX) I MD, CDR, and Tape Inputs/Outputs I RDS (PS) (European models)

1. Remove the battery compartment cover by pressing and sliding it out. 2. Insert two AA (R6- or UM-3)-size batteries into the battery compartment. Carefully follow the polarity diagram (positive (+) and negative () symbols) inside the battery compartment. 3. After batteries are installed and seated correctly, replace the compartment cover. Notes Do not mix new batteries with old batteries or different kinds of batteries. To avoid corrosion, remove the batteries if the remote controller is not to be used for a long time. Remove dead batteries immediately to avoid damage from corrosion. If the remote controller doesnt operate smoothly, replace both the batteries at the same time.
Using the remote controller
Point the remote controller toward the remote control sensor. Notes Place the unit away from strong light such as direct sunlight or inverted fluorescent light which can prevent proper operation of the remote controller. Using another remote controller of the same type in the same room or using the unit near equipment which uses infrared rays may cause operational interference. Do not put any object such as a book on the remote controller. The buttons of the remote controller may be pressed by mistake and drain the batteries. Make sure the audio rack doors do not have colored glass. Placing the unit behind such doors may prevent proper remote controller operation. If there is any obstacle between the remote controller and the remote control sensor, the remote controller will not operate.

Remote control sensor

approx. 5 m (16 feet)
Audio equipment connections
Do not connect the AC power cord (mains lead) to the wall outlet (the mains) until you have completed all the other connections connections on page 7, and the speaker connections on page 8. including the On each pair of connectors, a red connector (marked R) corresponds to the right channel, and a white connector (marked L) to the left channel. Connect white plugs of audio connection cables to L connectors and connect red plugs of audio connection cables to R connectors.
Audio connection cable To L connector , (White) To R connector , (Red) (White) / To L connector (Red) / To R connector Improper connection
Please refer to the instruction manual for each component when you make any connections. Insert the plug securely. If the connection is incomplete, noise or malfunction may result.

Insert completely

U.S. and Canadian models

REMOTE CONTROL

SPEAKERS R L AM
INPUT (REC) Stereo cassette tape deck CD recorder

ANTENNA

OUT (REC) (PLAY) IN OPTICAL
OUTPUT (PLAY) INPUT (REC) OUTPUT (PLAY)

DIGITAL OUTPUT

OUT (REC) (PLAY) IN

SUBWOOFER PRE OUT

DIGITAL OPTICAL INPUT

: Signal flow

To wall outlet
Asian and European models

OPT I CAL

R L R L
OUTPUT (PLAY) MD recorder

INPUT (REC)

Protective cap for the optical digital audio connector
Remove the protective cap before you use the OPTICAL DIGITAL OUTPUT connector. Please retain it for future use. If you do not use the optical digital audio connector, make sure to replace the cap.
About the OPTICAL DIGITAL OUTPUT connector
An optical digital audio input equipped MD recorder, DAT, or CD recorder may be connected with an optical fiber audio cable for digital recording of this unit.

Connecting the

remote control cables
If your other components are made by ONKYO and those components are equipped with connectors, you can control the connected components with the supplied remote controller. system hookups for control operations. The unit must be connected in the connectors except for this unit. There is no difference between these connectors. Each component has two The components may be connected in any order. system hookups. The hookups on the previous page are necessary independently of the hookup. The illustration below is an example of a Note This is not an example of stacking the components.

This unit (CR-305TX)

MD recorder
Stereo cassette tape deck
remote control cable (supplied with every connectors exONKYO component that has cept for the amplifier and receiver)

CD recorder

What can you do with the other ONKYO components by connecting with an

remote control cables?

Combination use of the unit with the stereo cassette tape deck K-505X or K-505TX, CD recorder CDR-205X or CDR-205TX, or MD recorder MD-105X or MD-105TX enables you to operate the following convenient functions. Note that the available components may vary according to the area. Remote control of the components All the components can be operated using the supplied remote controller. (Refer to Using the remote controller on page 35.) Program timer You can operate timer playback and recording using this unit. (With the CD recorder CDR-205X or CDR-205TX, you can operate timer playback only.) (Refer to Using the timer on page 26.) CD dubbing Simple CD dubbing using the CD recorder, MD recorder, or stereo cassette tape deck is possible with the pressing of a single button. The unit begins a search for the peak level and the CD recorder, MD recorder, or stereo cassette tape deck sets the optimum recording level to match that peak level. (Refer to CDR-205X or CDR-205TX, MD-105X or MD-105TX, or K-505X or K-505TX instruction manual for details.) CD synchro recording With the CD recorder, MD recorder, or stereo cassette tape deck in recording pause, starting CD playback causes these components to start recording. (Refer to CDR-205X or CDR-205TX, MD-105X or MD-105TX, or K-505X or K-505TX instruction manual for details.) Note remote control cable, audio connection cable, and optical fiber Make sure the unit and each component are firmly connected with the cable. If the connection is incomplete, the above functions does not work.

Connecting speaker systems
Connecting left and right speakers
The load impedance of each speaker must be at least 4 ohms. Do not use unnecessarily long or extremely thin speaker cords. Otherwise, the DC resistance of the speaker cords may become too high, lowering the damping factor and causing the sound quality to deteriorate. Do not connect the speaker cord to the L and R connectors at the same time and do not connect two or more speakers to the same speaker connectors.

SPEAKERS R L

Preparing the speaker cords for connection
1. Strip 10 mm from the end of each cord.

10mm (7/16)

2. Twist the stripped end of the cord.
Note To prevent damage to circuits never short-circuit the positive (+) and negative (-) speaker wires.
Connecting the speaker cords to the speaker connectors

1. Push the lever up.

2. Insert the stripped end of the cord.

Right ch. Speaker

Left ch. Speaker
3. Press down the lever. The wire of the stripped end of the cord should appear slightly.
Connecting a sub-woofer (U.S. and Canadian models)

Active sub-woofer

The SUBWOOFER PRE OUT jack supplies the left and right mixed monaural signals to the sub-woofer.
Connecting the AC power cord (mains lead)

2. STANDBY/ON

1. To wall outlet

TUNING/PRESET

1. Connect the AC power cord (mains lead) to the wall outlet (the mains). : appears on the display. 2. Press the STANDBY/ON button. Notes If the AC power cord (mains lead) is connected to the AC outlet of another component, that component's AC power cord (mains lead) must be connected to the wall outlet (the mains) to supply power to the unit. If the component has a power switch, it must be set to On. If you do not use the unit for a long time, remove the power cord of the CR-305TX from the AC outlet. The unit may cause a power surge on your home circuit when you turn it on. If this interferes with any other devices connected to the same circuit, plug this unit into another outlet on a separate circuit.

E USTIC PRESENC

VOLUME
STANDBY/ON MEMORY FM MODE DISPLAY INPUT

PHONES

REMOTE CONTROLLER

STANDBY/ON

RANDOM

MEMORY REPEAT

SCROLL

PLAY MODE REPEAT

A.PRESENCE

UME UP

CLOCK CALL

MUTING

LU M E D O W N

TUNER PRESET RC-421S

Making antenna connections
Assembling the AM loop antenna
Assemble the loop antenna as shown in the illustration.

Insert into the hole.

Connecting the antenna cable
1. Press down the lever. 2. Insert the wire into the hole. 3. Release the lever to replace it.
Connecting the included antennas
Connecting the FM indoor antenna The FM indoor antenna is for indoor use only. Extend the antenna and move it in various directions until the clearest signal is received. Fix it with push pins or similar implements in the position that will cause the least amount of distortion. If the reception is not very clear with the attached FM indoor antenna, the use of an outdoor antenna is recommended. U.S. and Canadian models Remove the insulation at the tip of the cable, and insert the cable securely, fully to the end of the exposed tip.
Connecting the AM loop antenna The AM loop antenna is for indoor use only. Set it in the direction and position where you receive the clearest sound. Put it as far away as possible from the unit, TVs, speaker cables, and power cords. When reception is not satisfactory with the attached AM loop antenna alone, connection of an outdoor antenna is recommended.
Connecting an FM outdoor antenna
Please make sure that you follow the considerations below regarding the location. Keep the antenna away from noise sources (neon signs, busy roads, etc.). It is dangerous to put the antenna close to power lines. Keep it well away from power lines, transformers, etc.
To avoid the risk of lightning and electrical shock, grounding is necessary. Follow item 14 of the Important Safeguards on page 2 when you install the outdoor antenna.
Connecting an AM outdoor antenna
The outdoor antenna will be more effective if it is stretched horizontally above a window or outside. Do not remove the AM loop antenna. To avoid the risk of lightning and electrical shock, grounding is necessary. Follow item 14 of the Important Safeguards on page 2 when you install the outdoor antenna.

Directional Iinkage

Do not use the same antenna for both FM and TV (or VCR) reception since the FM and TV (or VCR) signals can interfere with each other. If you must use a common FM/TV (or VCR) antenna, use a directional linkage type splitter.
Directional lingake type splitter To CR-305TX To TV (or VCR)

Outdoor antenna

Indoor antenna 300 ohms ribbon wire
Connecting the antenna cable to the 75/300 ohm antenna adapter (Other than U.S. & Canadian models)
Connecting the 300 ohm ribbon wire Loosen the screws and wrap the wire around these screws. Then tighten the screws with a screwdriver. Connecting the coaxial cable 1. With your fingernail or a small screwdriver, press the stoppers outward and remove the cover. 2. Remove the transformer wire A from slit B and insert it into slit C. 3. Prepare the coaxial cable as shown in the diagram. Connect the 75/300 ohm antenna adapter to the coaxial cable. 1 Insert the end of the cable. 2 Clamp it in place with pliers. 4. Re-install the cover.

Slit B

6 mm mm mm 15 mm

Wire A Slit C

Control positions and names

U S TIC P R E S E N

Display
TIMER CD W.DAY W.END MEMORY REC REPEAT SLEEP RANDOM

RDS S T

STEREO MIN MUTING kHz S.BASS MHz DIRECT

Front panel

For more information about buttons or knobs, refer to the pages listed in the brackets ( [ ] ) below. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. STANDBY/ON button [9, 28, 30] MEMORY button [20, 22 to 24] FM MODE button [24] DISPLAY button [21, 25] buttons [16, 18, 22 to 24] INPUT buttons [22 to 24] TUNING/PRESET , buttons [18, 20] button [18, 20] button [18, 20] button [16, 18, 20] ACOUSTIC PRESENCE button and indicator [16] VOLUME control knob [16] Remote contrtol sensor [5] Display (Refer to the Display illustration.) Disc tray [18] PHONES jack [17]
If a protective film on the surface of the screen making it difficult to read the display, remove the film. a. b. c. d. e. f. g. CD indicator MEMORY indicator (play/pause) indicator TRACK indicator AUTO indicator MONO indicator AM/PM indicator AM or PM lights up when you switch the clock setting to 12H (12 hour display). RDS indicator (European models only) Single remaining time indicator Total remaining time indicator Tuning indicator STEREO indicator MUTING indicator Frequency indicators Sleep time indicator Multi display REPEAT indicator RANDOM indicator Timer setting indicators
h. i. j. k. l. m. n. o. p. q. r. s.
Remote controller RC-421S
For more information about buttons or knobs, refer to the pages listed in the brackets ( [ ] ) below. 1. STANDBY/ON button [9] Toggles between STANDBY and ON. 2. TIMER operation buttons [14, 15, 26 to 30] Enables you to make the settings of the clock, timer playback and recording. 3. CD operation buttons [16, 18 to 20] 4. MD operation buttons [35] 5. SLEEP button [31] Enables you to make the sleep time setting. 6. VOLUME (UP)/ (DOWN) buttons [16, 17] Enables you to increase or decrease the volume level. 7. CLOCK CALL button [15] Enables you to display the current time. 8. CDR operation buttons [35] buttons [24] 9. TUNER PRESET Enables you to select the PRESET stations. buttons [16, 18, 22 to 24] 10. INPUT Enables you to select a listening source. 11. A. PRESENCE button [16] Enables you to switch acoustic presence off and types. 12. MUTING button [17] Enables you to mute the sound temporarily. 13. TAPE operation buttons [35]

TIMER ENTER

UME UP VOL

LUME DO

Setting the clock
1. Press the TIMER button until ADJUST is selected on the display, then press the ENTER button. The day of the week will flash on the display. buttons until the desired day of the week is 2. Press the selected, then press the ENTER button. The time will flash on the display. buttons to set the desired time. 3. Use the 4. Press the ENTER button. The clock will start operating. When you set the clock while the unit is in the standby mode, the present time will continue to be displayed. When you set the clock while the unit is on, the normal display will be resumed.
Switching between the 24 hour and 12 hour display settings
1. Press the TIMER button repeatedly to display 24H/12H. 2. Press the ENTER button. 24H or 12H flashes on the display. buttons to select 24H (24 hour display) or 12H 3. Use the (12 hour display). 4. Press the ENTER button to confirm the setting.

Clock Call function

Press the CLOCK CALL button to display the time, press again to cancel the time display. Note If the time has not been set, ADJUST will flash on the display. In this case, press again the CLOCK CALL button, then set the clock. (Refer to Setting the clock on page 14.)
Choosing the required source

VOLUME /

A. PRESENCE
ACOUSTIC Indicator PRESENCE

Remote controller

1. Press the INPUT buttons or the INPUT buttons on the remote controller to select the desired source. Each time you press these buttons, the display changes as follows. U.S. and Canadian models: CD, CDR, TAPE, FM or AM Asian and European models: CD, MD, CDR, TAPE, FM or AM 2. Start playing the source you selected in step 1. The example shown on the left indicates that you have selected the CD as the source.
3. Set the volume to appropriate level using the VOLUME con(UP)/ (DOWN) buttons on the trol or the VOLUME remote controller. Turn the VOLUME control clockwise to increase the volume or counterclockwise to decrease the volume.

LUME DO WN

Adjusting the sound

U S TIC P R E

ACOUSTIC PRESENCE
Acoustic Presence reinforces super bass, bass and treble of the music through the use of exclusive Onkyo circuitry. You can enjoy the powerful sound with the following 4 presence settings. Each press of the ACOUSTIC PRESENCE button or the A. PRESENCE button on the remote controller changes the mode as follows, and the indicator lights up while you are activating Acoustic Presence.

MEMORY FM MODE

CD MEMORY

Remote controller MEMORY

To erase a track number from memory, while in MEMORY playback mode, and the CD is stopped, press button. Each press erases the last track number from the memory. To erase all track numbers from memory, while in MEMORY playback mode, and the CD is stopped, press button. the
Changing the display information
Pressing the DISPLAY button repeatedly during playback will change the display information as follows: The elapsed time of the playing track The remaining time of the playing track ( S lights up) Total remaining time of the disc or the total time of the programmed tracks (shown in MEMORY playback mode only) ( T lights up)
Programmed memory number (P-00) (Shown in MEMORY playback mode only)
Note : will be displayed, if the playing track number is 21 or more, or if the total playing time of the programmed tracks exceeds 99 minutes and 59 seconds, or if you try to store more than 20 tracks into memory.
Precautions for handling the Compact Disc (CD)
This section shows you how to handle, clean, and store discs. On handling Discs Do not touch the playback side of the disc. Do not attach paper or tape to discs. On storing Discs Do not store discs in a place subject to direct sunlight or near heat sources. Do not store discs in places subject to moisture and dust such as bathroom or near a humidifier. Store discs vertically in a case. Stacking or placing objects on discs outside of their case may cause warping. Playable Discs This unit can play back the following discs.
Disc mark Playback side Audio CDs Audio Contents Maximum playback time 12 cm Approx. 74 minutes 8 cm (CD Approx. 20 minutes single) Disc size
On Cleaning discs Fingerprints and dust on the disc cause sound deterioration. Wipe the disc from the center outwards with a soft cloth. Always keep the disc clean. If you cannot wipe off the dust with a soft cloth, wipe the disc lightly with a slightly moistened soft cloth and finish with a dry cloth. Do not use any type of solvent such as thinner, benzine, commercially available cleaners or antistatic spray for vinyl LPs. It may damage the disc.
You cannot play back discs other than those listed above. You cannot play discs such as CD-R, CD-RW, CD-ROM, etc., even if the marks in the above table are labeled on those discs. Avoid using heart-shaped or octagonal discs. Playing irregularly shaped discs may damage the internal mechanism of this unit.
Do not use discs that have residue from adhesive tape, rental discs that have peeling labels, or discs that have custom labels or stickers. Otherwise, you may not be able to eject the discs, or the unit may become inoperative.

Buttons and modes for the Timer function (remote controller only)
The following buttons and setting modes are used to operate the Timer function.

RANDOM MEMORY REPEAT

TIMER button Use this button to select a timer mode. The timer mode will change each time you press this button. buttons Use these buttons to select the details of the mode or to change values. ENTER button Use this button to enter the selected mode or numbers. Timer setting modes WEEKDAY: This mode enables you to listen to a specified component at a designated time on weekdays. WEEKEND: This mode enables you to listen to a specified component at a designated time on weekends. REC: This mode enables you to record your favorite broadcasting program(s) starting at a designated time. DAY SET: This mode enables you to change the day setting (definition) of WEEKDAY or WEEKEND. ADJUST: This mode enables you to set and adjust the clock. If you have adjusted the clock, you do not need to set it again.
Changing the WEEKDAY and WEEKEND settings
Sunday Monday Tuesday Wednesday Saturday Friday Thursday
You can define or change which day is WEEKDAY or WEEKEND. You can also define the day as both WEEKDAY and WEEKEND in order to program two timer settings on the same day. The initial factory settings are: WEEKDAY : Monday - Friday WEEKEND : Saturday and Sunday 1. Press the TIMER button repeatedly until DAY SET appears on the display, then press the ENTER button.
buttons to select WEEKEND or WEEK2. Press the DAY. END or DAY flashes. 3. Press the ENTER button. The current WEEKDAY or WEEKEND setting will be displayed. 4. Press the ENTER button repeatedly to display the flashing bar cursor of the day you would like to select. buttons to display the desired day of the week. 5. Press the buttons repeatedly toggles between the day inPressing the dication and the bar cursor ( _ ). 6. Press the ENTER button to confirm the selection. When you press the ENTER button while the character or bar cursor at the right end is flashing, the unit completes the setting.

STANDBY/ON TIMER

Programming to play at a specified time
The clock of this unit must be set correctly before programming the timer. Before using the timer for listening to or recording broadcast programs, you need to store the preset stations. (Refer to Presetting your favorite stations on page 23 for information how to preset stations.) 1. Press the TIMER button repeatedly until WEEKDAY or WEEKEND is displayed, and press the ENTER button. buttons to set the ON time, and press the EN2. Press the TER button.

TIMER W.DAY STEREO

Note When you store the ON time, the display automatically indicates that the OFF time is one hour after the ON time you specified. buttons to select the OFF time, and press the 3. Press the ENTER button. buttons to select the source, and press the EN4. Press the TER button. buttons, the display changes as folEach time you press the lows. U.S. and Canadian models: FM, AM, CD, CDR, TAPE Asian and European models: FM, AM, CD, MD, CDR, TAPE If you select FM or AM, press the buttons again to select the preset number and press the ENTER button.

Switching the timer ON/OFF
You can switch the timer ON/OFF to cancel the timer setting, to enable the timer again, or to perform timer recording again. When the Timer function is enabled, the selected timer mode such as WEEKDAY, WEEKEND, and REC appears in the upper left corner of the display. Note To switch the timer ON, first you need to program the time value.

TIMER W.DAY AUTO

1. Press the TIMER button repeatedly until the timer mode (WEEKDAY, WEEKEND or REC) that you would like to enable or disable appears on the upper left corner of the display. buttons to switch the selected mode ON or OFF. 2. Press the 3. Press the ENTER button to confirm the selection.

Sleep function

The Sleep function can be performed only by using remote controller. The SLEEP timer automatically sets the entire system to Standby mode after a specified period of time. 1. Start playing something you would like to listen to. 2. Press the SLEEP button repeatedly to set the desired sleep time. The time value will decrease from 90 minutes to 10 minutes in steps of 10 minutes. After a specified period of time, the unit will be automatically placed in Standby mode. To check the remaining time while the SLEEP function is active, press the SLEEP button. After CD dubbing is complete, the unit will be placed in Standby mode. Cancelling the SLEEP setting Press the SLEEP button repeatedly until the SLEEP indicator on the display disappears.

AUTO MIN SLEEP STEREO

Notes for timer setting
Make sure that the clock has been set correctly before setting the timer. After setting the timer, be sure to set this unit in Standby mode. If this unit is not in Standby mode, the timer will not work. When the power is turned on by one of the timer mode settings, the other timer modes may not be activated at their ON time. The power will be switched off by the first timer mode at its OFF time. Set a gap of one minute or more between the OFF time and ON time for each timer setting. (See the figure on the left.) If you press the SLEEP button during timer play or timer recording, the power will be switched off at the SLEEP timer's OFF time. If more than two timer mode settings are made at the same time, the WEEKDAY setting has the priority over the WEEKEND setting. The REC mode setting has no priority. The timer recording setting will be cancelled if the recording does not start at the ON time (for example, if the power is already on).

doc1

CR-305TX

SN 29343329

I0203-1

WARNING
RISK OF ELECTRIC SHOCK DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR

CLASS 1 LASER PRODUCT

I I I I I I I I I I

RE MO TE CO NT RO LL ER

REMOTE CONTROL

SPEAKERS R L AM

ANTENNA

OUT (REC) (PLAY) IN

OPT I CAL

DIGITAL OUTPUT

R L R L

SPEAKERS R L

TUNING/PRESET

VOLUME

STANDBY/ON MEMORY FM MODE DISPLAY INPUT

E USTIC PRESENC

PHONES

REMOTE CONTROLLER

STANDBY/ON

RANDOM

MEMORY REPEAT

SCROLL

PLAY MODE REPEAT

A.PRESENCE

UME UP

CLOCK CALL

MUTING

LU M E D O W N

TUNER PRESET RC-421S

6 mm mm mm 15 mm

UME UP VOL

LUME DO WN

U S TIC P R E
STANDBY/ON MEMORY FM MODE

CD TRACK

CD MEMORY TRACK T

REPEAT

CD MEMORY REPEAT

MEMORY FM MODE

MEMORY

CD MEMORY

CD MEMORY TRACK

STEREO

AUTO MEMORY MHz

AUTO STEREO

MONO STEREO

TUNER PRESET

TIMER W.DAY STEREO

TIMER W.DAY

TIMER W.DAY REC STEREO

TIMER REC

TIMER REC STEREO

TIMER REC STEREO MHz

TIMER W.DAY AUTO

AUTO MIN SLEEP STEREO

+ + + + + + + +

U S TIC P R E S E N

TIMER CD W.DAY W.END MEMORY REC REPEAT SLEEP RANDOM

RDS S T

STEREO MIN MUTING kHz S.BASS MHz DIRECT

LUME DO

Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8111 Fax: 072-833-5222 http://www.onkyo-intl.com ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://www.onkyousa.com ONKYO EUROPE ELECTRONICS GmbH Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY Tel: +49-8142-4401-0 Fax: +49-8142-4401-555 http://www.onkyo.net ONKYO CHINA LIMITED Units 2102-2107, Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung, N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039 http://www.onkyochina.com
HOMEPAGE http://www.onkyo.co.jp/

 

Tags

Msys 5200 TOP Star TA-FB920R G-9000 3VS851ID Gpsmap 4008 A-3300S MX-J500 ML-2510 ETS CFD-V10 YST-SW300 Rookie Stratos Switch EW1080F Breil 1L22 SC-PM86D WM2032HS CS-F24dte5 MCP651 WS902 SCC-C6403P Turbocap GR-700 CT-WM70R HTS3365X 2400PSI M402SR Delta 2 MS-1355 MFC10 Powerdirector 7 1AL CH Audioline 703 L-140 Autopilot Benq W500 E 320 Acerpower ST Lenco L-69 CBM-520 42PT81 ESF2440 HT-Z210T 64071574 Drive KC-500 8-PEC CPF-IX001 CM-2500D 55PP9501 TA-AX301 PT-AE700 GT-E2120B CDX-MP200X Falcon 4 Vgn-fj270-B LRG30357ST PF3230 1700 Club DV-NC55 Quicksilver 46SD Workstations Mp4 TS-930S TSU7000 Spray GUN OLE Co80 Sahe7 CN-HW1000D CDP-CX335 TL703 SP4805 Advanced-MP3-player WFF 1400 L300D ZR800 Xv-dv252 LP-8000C G3 DV HVL-F1000 F250-2001 Notebook 741MP DEH-1730R SL-SX500 VSX-AX5AI SHI 4300 DPX-5010 VN-CX1 46PFL5605H Canon MV5I 300W101 Nglm23-2H LP755 Opus 69 EH-TW450 SA-PM11 PSS-100 F152 156 Team POD

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101