Panasonic DMR-EZ49V Manual
Panasonic DMR-EZ49v Dvd Player, size: 4.8 MB
Here you can find all about Panasonic DMR-EZ49V like review and other informations. For example: .
Panasonic DMR-EZ49V manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Panasonic DMR-EZ49V please write about it to help other people. [ Report abuse or wrong photo | Share your Panasonic DMR-EZ49V photo ]
User reviews and opinions
No opinions have been provided. Be the first and add a new opinion/review.
Customer Care Centre For customers within the UK: 3852 For customers within the Republic of Ireland: 8333 Visit our website for product information www.panasonic.co.uk E-mail: firstname.lastname@example.org Direct Sales at Panasonic UK For customers: 3856 Order accessory and consumable items for your product with ease and confidence by phoning our Customer Care Centre Monday Thursday 9.00 a.m.5.30 p.m., Friday 9.30 a.m.5.30 p.m (Excluding public holidays).
Or go on line through our Internet Accessory ordering application at www.pas-europe.com. Most major credit and debit cards accepted. All enquiries transactions and distribution facilities are provided directly by Panasonic UK Ltd. It couldnt be simpler! Also available through our Internet is direct shopping for a wide range of finished products, take a browse on our website for further details. Interested in purchasing an extended guarantee? Please call 6284 or visit our website www.panasonic.co.uk/guarantee.
Caution for AC Mains Lead
For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark or the BSI mark on the body of the fuse. If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local dealer. CAUTION! IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13- AMPERE SOCKET. If a new plug is to be fitted please observe the wiring code as stated below. If in any doubt please consult a qualified electrician. IMPORTANT The wires in this mains lead are coloured in accordance with the following code: Blue: Neutral, Brown: Live. As these colours may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black or Blue. The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Brown or Red. 2.Replace the fuse and close or attach the fuse cover.
Figure A Figure B Fuse (5 ampere)
WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E, BY THE EARTH SYMBOL OR COLOURED GREEN OR GREEN/YELLOW. THIS PLUG IS NOT WATERPROOFKEEP DRY. Before use Remove the connector cover. How to replace the fuse The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below. Illustrations may differ from actual AC mains plug. 1.Open the fuse cover with a screwdriver.
Play Chapter List Subtitles
3, 4, 2, 1 to select an item, then
You can sometimes use the numbered buttons to select an item. [VCD] Press the numbered buttons to select an item. e.g., 5:
Playing a Video Cassette
Refer to Advanced Video Cassette Playback ( information on playback of video cassette. [VHS] 40 to 41) for detailed
Tapes are automatically rewound once they reach the end (except during Timer recording, fast forwarding, etc.). You may have to adjust the tracking for tapes recorded on other VCRs ( 41). In some cases, the picture quality may still be inferior; this is due to format constraints. If $ appears on the TV, the operation is prohibited by the unit or video cassette.
to select the VHS drive. 7).
The VHS indicator lights up on the unit.
Insert a cassette (
Play starts automatically if you insert a cassette with the accidental erasure tab removed.
Recording Television Programmes
Refer to Notes for Recording ( 27) and Advanced Recording ( 30) for detail information on recording. [RAM] [-R] [-R]DL] [-RWV] [+R] [+R]DL] [+RW] [VHS] 28
Preparation: Turn on the television and select the appropriate video input to suit the connections to this unit. [RAM] If the disc is protected, release protection ( 64). [VHS] Ensure accidental erasure tab is intact.
to turn the unit on. to select the drive (DVD or VHS).
Insert a disc or video cassette.
Insert a disc or video cassette with enough remaining blank space ( 7). When the format confirmation screen is displayed ( 29).
STOP PAUSE PLAY
to select desired channel.
To select with the numbered buttons ( 19). When no channel setting is performed on the unit and broadcast is recorded directly from the digital satellite receiver, select a channel on the connected equipment, then press [INPUT SELECT] to select AV2.
Rec Mode XP SP LP EP
to select the recording mode. ( 28)
0:16 0:32 1:05 2:11
[RAM] [-RWV] [+R] [+R]DL] [+RW] To use a new disc, formatting is necessary. ( 29, 64) [-R] [-R]DL] [-RWV] [+R] [+R]DL] [+RW] It takes about 30 seconds for the unit to complete recording management information after recording finishes. You cannot change the channel or recording mode during recording. This unit cannot record NTSC signals to discs that already have PAL signal recordings. Depending on the type of disc used for recording or the type of broadcast, there may be restrictions on the title you are trying to record. ( 27) [VHS] Even if the video cassette is labelled S-VHS, it is not possible to record in the S-VHS system with this unit. This unit records in the normal VHS system. When recording is paused for 5 minutes or more, the unit returns to stop.
3, 4, 2, 1 to select the future programme, then
Sun 10/10/10 19:45
Remain DVD 1:34 SP
SUN 10/10/10 19:45:00
TV Guide: Landscape Sun 10th
2 BBC 2
VHS 2:59 Selection screen SP
TUE 14.10.08 12:54:00 The West Tonight 2 BBC 2 10/10 SUN 20:TV All Channels News & Factual : BBC 2 Holiday Programme TUE 14.10.08 (Guide Link) 18:00 18:30
-24 hours TIMER REC RETURN +24 hours
Stop Drive Mode STTL AD View 22:30 DVD Rec SP Single Timer OFF OFF
To check programmes ( 34) To cancel a timer recording programming 1 Press [3, 4, 2, 1] to select the programme (the timer icon is displayed) and press [OK]. 2 While Delete is selected, press [OK]. 3 Press [2, 1] to select Yes and press [OK]. The timer icon disappears. To record sound using LPCM (XP mode only): Set the Audio Mode for XP Recording to LPCM in the Setup menu ( 69)
Series Timer Rec Delete
Programme Name Press OK to store the programme.
Guide Link is displayed here.
Confirm the programme (start and end time) by TV magazine, etc. and correct if necessary using 3, 4, 2, 1 then OK
The settings are stored and the timer programme is on. The timer icon is displayed. F lights on the units display to indicate timer recording standby has been activated. Repeat steps 23 to programme other recordings. Press  to turn the unit off.
[RAM] [-RWV] [+R] [+R]DL] [+RW] To use a new disc, formatting is necessary. ( 29, 64) The GUIDE Plus+ list is not displayed immediately after initial tuning is done. The GUIDE Plus+ system will not work if the clock is not set correctly. If NTSC has been selected for TV System ( 70), the GUIDE Plus+ system cannot be used. Guide Link will not be displayed and will not function under the following conditions. Timer programmes set manually ( 33). Timer programmes set from the TV Guide are modified or start/stop time changed by more than 10 minutes from original time. FR recording mode is not available when the timer programme is controlled by Guide Link. The receipt of the GUIDE Plus+ system data is only possible via the aerial input of this unit. The receipt of the TV Guide data via externally connected satellite receivers is not possible. If you set a timer recording that will overlap with other timer recordings, the Overlapped Timer Recording screen appears to help you resolve the overlapping. Follow the on-screen instructions. Simultaneous recording to both DVD and VHS is not possible.
mode. Select the channel on the digital satellite receiver.
The unit turns off and EXT-L lights on the units display to indicate timer recording standby has been activated. While the unit is in EXT LINK standby mode or recording, most operations on this unit are prohibited ([< OPEN/CLOSE], [/I] etc.).
To cancel the external control Press [EXT LINK] to stop recording or to cancel linked timer recording standby (The unit turns on and EXT-L disappears.). Manual timer recordings ( 33)
To skip unwanted parts Press [;] to pause recording. (Press again to restart recording.) [VHS] When recording is paused for 5 minutes or more, the unit returns to stop. To stop recording Press .
In order to prevent accidental operation, press [EXT LINK] to cancel the setting after recording is finished. This function does not work when TV System is set to NTSC in the Setup menu ( 70). This function does not work with some equipment. Refer to the equipments operating instructions. The beginnings of recordings may not be recorded correctly in some cases. When Ext Link is set to Ext Link 2, this function does not work if the input signal is NTSC system. Programmes are recorded as one title on this unit when the end time of the earlier timer recording and the start time of the later timer recording are close to each other. [RAM] To divide the titles, go to Divide Title ( 51). When this unit is in EXT LINK standby (EXT-L is shown on the units display), the TV Guide data cannot be downloaded. While the unit is in EXT LINK standby mode or recording, AV1 output terminal outputs the signal which is input from the AV2 input terminal irrespective of AV1 Output setting ( 71). (Except for [VHS] ) During EXT LINK standby mode or recording, playback is only available if you select the DVD drive in the step 2 above. When EXT-L lights on the units display, Direct TV Recording is unavailable.
This unit cannot record NTSC signals to discs that already have PAL signal recordings.
Recording from an External Device
Turn off the unit and other video equipment before connecting. Refer to Adding a VCR: Connecting to a Television and a Video Cassette Recorder when connecting to the AV2 input terminals on the rear panel. ( 75)
Recording to DVD
[RAM] [-R] [-R]DL] [-RWV] [+R] [+R]DL] [+RW] Perform steps 1 - 3 ( left).
AV3 IN S VIDEO VIDEO L /MONO AUDIO R
Start play on the external device. at the point you want to start recording to the disc.
Vertical Locking Adjustment
^ Remaining tape time
Adjust the vertical synchronisation to stop the picture from shaking while paused. While paused
Remaining tape time display The displayed time is approximate. The displayed time will be incorrect if you set the wrong tape length in Tape Length in the Setup menu ( 71) and if the tape is of poor quality.
Press and hold until the shaking stops.
To return to the standard position:
This function may not work with some tapes. You can also adjust vertical synchronisation with [CH W X] on the main unit.
Changing Audio during Playback
Press and hold for about 5 or more seconds.
The audio changes as follows. L R (Stereo) -------------------> L -----------------> R ^ No display (Normal audio track)
Playing Music files and Still Pictures (JPEG)
Showing the menu screen
Playing music files
[-R] [-R]DL] [CD] [USB] You can play MP3 files recorded with a computer onto a DVD-R, DVD-R DL, CD-R/CD-RW and USB memory. ( 18) You cannot play MP3 files on the USB memory while recording or copying.
Insert the disc.
If the menu screen appears
3, 4 to select the item, then
Show MP3 Menu screen.
( left, Showing the menu screen)
CD No. 1 : Total Group My favorite Track 001 Both Ends Freezing 002 Lady Starfish 003 Life on Jupiter 004 Metal Glue 005 Paint It Yellow 006 Pyjamamama
Play Mode : JPEG Select file type. JPEG MP3
G 1 T 1 TOTAL 1/111
A: Group No. B: Track No. in the group C: Track No./Total tracks in all groups
Insert the USB memory. 3, 4 to select a file type, then
Number 0 9
3, 4 to select a track, then to play.
indicates the track currently playing.
Picture ( JPEG ) Music ( MP3 )
To stop playing Press . To exit the menu screens Press [DIRECT NAVIGATOR].
This button is available only when this unit is on. When this button is pressed, the playback image is not immediately displayed on the screen and it may not be possible to watch the contents from where playback started. In this case, press [:] or  to go back to where playback started. This function is available with the TV that supports HDAVI Control 3 or later.
Easy control only with VIERA remote control
If you connect this unit to the TV that supports HDAVI Control 2 or later with an HDMI cable, you can enjoy using more convenient functions. You can operate this unit using buttons on the TV remote control. The buttons that you can use for this unit vary depending on the TV. For details, refer to the operating instructions of the TV. Use the remote control supplied with this unit if you cannot operate this unit using buttons on the TV remote control. The operation of this unit may be interrupted when you press incompatible buttons on the TV remote control. The TV displays the TV tuners picture when the linked operation is finished. Using the FUNCTION MENU to operate this unit
Using the Control Panel Using the Control Panel, you can operate search backward, search forward, stop, etc, with the TV remote control. Select Control Panel, then press [OK] in step 2 of Using the OPTION menu window to operate this unit ( left). The Control Panel is displayed ( right)
While playing a title or DVD-Video, etc. Pause : Pause, : Stop, Exit : Search backward, Search Search : Search forward, [OK]: Play, Play [EXIT]: Exit the Control Panel Stop While playing still pictures : Stop, :View previous picture, : View next picture, [EXIT]: Exit the Control Panel When you want to leave the TV on and set only this unit to standby mode Press  on this units remote control, then set to standby mode. When not using HDAVI Control Set VIERA Link in the Setup menu to Off ( 70).
This function is available with the TV that supports HDAVI Control 2 or later. 1 Display this units FUNCTION MENU using the TV remote control. 2 Select the item you want to operate with the TV remote control, then press [OK]. Using the OPTION menu window to operate this unit
English DVB Signal Condition English
DVB Channel Signal Quality Signal Strength
You can also use the following method to restart DVB Auto Setup by Signal Quality. When the unit is turned on and stopped, press and hold [CH W] and [X CH] on the main unit simultaneously for about 5 seconds. Auto-Setup screen appears.
[CH54] 20 BBC ONE Wales
Channel + Channel
The quality and strength of the signal are shown. Press [W X CH] to select the channel.
DVB Manual Tuning
Below 2 (display red) 25 (display orange)
Frequency [CH54] 0 Signal Quality 0 Signal Strength No. Channel Name 738.0 MHz New
You can set channels manually if the DVB Auto Setup by Signal Quality could not be completed successfully.
Over 5 (display green)
The signal quality is so poor that there may be interference in the pictures and sound. The signal quality is basically adequate, but brief interference in the pictures and sound is possible in isolated case. Optimum picture and sound quality.
1 Press [3, 4] to select the channel you want to set. Select the channel by checking the signal strength and signal quality displays. [Refer to Signal Condition ( right) for signal strength and signal quality.] 2 Press [OK] to start scan. DVB Manual Tuning The set channel is displayed in Frequency [CH54] 738,0 MHz Signal Quality the table. Signal Strength No. Channel Name Type New Repeat steps 12 to tune 1 BBC ONE Wales TV other channels. 2 BBC 2W TV 5
The display for signal strength is grey. 0 means signal strength 0%, 10 means signal strength 100%. If the signal is too strong, the display will change from grey to red. Reduce the signal amplification at your aerial. When the signal is weak: check that the aerial is correctly positioned. adjust the aerial reception with DVB Manual Tuning in the Setup menu ( left). check that the current digital broadcast channel is correctly broadcasting. check that your aerial is capable of receiving DVB broadcasts.
When Other Panasonic Products Respond to this Remote Control
Use this function to synchronize the codes for the remote control and the main unit when there are other Panasonic products close to your unit. With the unit stopped 1 Press [FUNCTION MENU]. 2 Press [3, 4] to select Others, then press [OK]. 3 Press [3, 4] to select Setup, then press [OK]. 4 Press [3, 4] to select Others, then press . 5 Press [3, 4] to select Remote Control, then press [OK]. 6 Press [3, 4] to select the code (DVD 1, DVD 2 or DVD 3) and press [OK].
Setup Tuning Disc Picture Sound
To Reset This Unit
To reset the units settings All the settings except for the ratings level, ratings PIN, Owner ID, Clock and remote control code, etc. return to the factory preset. The timer recording programmes are also cancelled. When the unit is turned on and stopped. Press and hold [X CH] and [CH W] on the main unit for about 5 seconds. The Auto-Setup starts automatically. ( 13) To reset the ratings level settings With the unit is turned on and stopped 1 Press [< OPEN/CLOSE] to open the disc tray. 2 Press [DRIVE SELECT] to select the DVD drive. On the main unit 3 Press and hold [ REC] and  (PLAY) for about 5 seconds. To restore the unit if it freezes On the main unit Press and hold [/I] for more than 3 seconds. The unit is turned off.
Press and OK together for more than 5 seconds on the remote control.
Connection VHS Others
7 While pressing and holding [OK], press and hold the numbered button ,  or  corresponding to the code set in step 6 for more than 5 seconds to set. 8 Press [OK] to complete. When the following indicator appears on the units display
Change the code on the remote control to match the code displayed for the main unit ( step 7).
To return to the previous screen Press [RETURN ]. To exit the screen Press [EXIT].
Enter the code with the numbered buttons.
Language code list
Abkhazian: 6566 Afar: 6565 Afrikaans: 6570 Albanian: 8381 Amharic: 6577 Arabic: 6582 Armenian: 7289 Assamese: 6583 Aymara: 6589 Azerbaijani: 6590 Bashkir: 6665 Basque: 6985 Bengali; Bangla: 6678 Bhutani: 6890 Bihari: 6672 Breton: 6682 Bulgarian: 6671 Burmese: 7789 Byelorussian: 6669 Cambodian: 7577
Catalan: Chinese: Corsican: Croatian: Czech: Danish: Dutch: English: Esperanto: Estonian: Faroese: Fiji: Finnish: French: Frisian: Galician: Georgian: German: Greek: Greenlandic: Guarani:
Gujarati: Hausa: Hebrew: Hindi: Hungarian: Icelandic: Indonesian: Interlingua: Irish: Italian: Japanese: Javanese: Kannada: Kashmiri: Kazakh: Kirghiz: Korean: Kurdish: Laotian: Latin: Latvian, Lettish:
Lingala: Lithuanian: Macedonian: Malagasy: Malay: Malayalam: Maltese: Maori: Marathi: Moldavian: Mongolian: Nauru: Nepali: Norwegian: Oriya: Pashto, Pushto: Persian: Polish: Portuguese: Punjabi: Quechua:
Times shown may disagree with actual times. [-R] [-R]DL] [+R] [+R]DL] The remaining capacity does not increase even if titles are deleted. Available space on a DVD-RW (DVD-Video format) or +RW disc increases when you delete the last title (space may increase slightly when you delete other titles). If you record or edit about 200 times or more, the remaining capacity of DVD-R, DVD-R DL, +R, and +R DL is reduced and then recording or editing may be disabled (for the second layer on DVD-R DL and +R DL, this happens after about 60 times). The time during searching may not be displayed accurately.
This unit turns off when the TV input is switched.
This is a normal phenomenon when using VIERA Link (HDAVI Control 4 or later). For details please read the operating instructions for the TV.
The clock is not correct.
Under adverse reception conditions, etc., the automatic time correction function may not work. In this case, Automatic is automatically turned to Off. If re-setting the Auto Clock Setting does not work, set the time manually. ( 14)
Compared to the actual recorded time, the elapsed time displayed is less. (Only when recording in NTSC)
The displayed recording/play time is converted from the number of frames at 29.97 frames (equal to 0.999 seconds) to one second. There will be a slight difference between the time displayed and the actual elapsed time (e.g., actual one-hour elapsed time may display as approximately 59 minutes 56 seconds). This does not affect the recording.
The tape counter is not changing.
The tape counter does not change while playing unrecorded parts. The second display changes as follows: (e.g., Blank after 1 h 36 min)
The units display also appears like this if the tape is dirty or damaged. Consult your dealer if this is the case.
The clock does not display on the unit when switched to standby.
Ensure Power Save in Standby is deactivated. ( 72)
General Issues: Operation
Cannot eject a disc.
The unit is recording. The unit may have a problem. Eject the disc as in 2 left. Linked timer recordings with external equipment is in recording standby (EXT-L on the units display blinks when  is pressed.) Press [EXT LINK] to cancel the recording standby. If the Child Lock function is activated, above operation does not work. Cancel the Child Lock function. ( 31, 74)
The GUIDE Plus+ information is not displayed properly.
There was a programme change or GUIDE Plus+ information from a broadcast station was possibly not correctly transmitted. Check the current programme, e.g. on the Web site for the GUIDE Plus+ system provider or station provider.
The GUIDE Plus+ data is not updated.
The unit must be in standby mode in order to update the data. If the unit is in EXT LINK mode (EXT-L lights up in the units display), then the data update may also not work. Make sure that the time is set correctly. ( 14) Check whether Off is set under TV Guide Download in Standby and change the setting in System Update in the Setup menu. ( 73)
U88 is displayed and the disc cannot be ejected.
The unit is carrying out the recovery process. The disc may be defective. Do the following to eject the disc. Try another disc. 1 Press [/I] on the main unit to switch to standby mode. If the unit doesnt switch to standby mode, reset the unit ( 82, To restore the unit if it freezes). 2 While the unit is turned off, press and hold  and [CH W] on the main unit at the same time for about 5 seconds. (Ejection may take extra time depending on discs.)
The digital channel information does not appear.
Select the length of time (310 sec.) in the On-Screen Messages in the Setup menu. ( 69) The digital channel information will not appear during playback or recording. Perform DVB Auto Setup by Signal Quality in the Setup menu. ( 67)
Digital broadcasts cannot be received.
Check the connections. ( 10, 11, 75) Digital broadcast may not have started in your region yet. Perform DVB Auto Setup by Signal Quality in the Setup menu. ( 67)
TV reception worsens after connecting the unit.
This can occur because the signals are being divided between the unit and other equipment. It can be solved by using a signal booster, available from electronics retailers.
No Digital Teletext
Not all functions of Digital Teletext work on this unit. When subtitle is on or additional information in the digital channel information is displayed, Digital Teletext does not work. Perform DVB Auto Setup by Signal Quality in the Setup menu. ( 67)
Cannot display DIRECT NAVIGATOR screen.
This screen cannot be displayed during recording or copy or while the unit is standing by for linked timer recording with external equipment.
Still pictures (JPEG) do not playback normally.
The images that were edited on the PC, such as Progressive JPEG etc., may not playback. ( 18)
On-screen display indicators do not appear.
Select a setting other than Off in On-Screen Messages in the Setup menu. ( 41, 69) Press [STATUS ] to show the on-screen display indicators.
The grey background appears during playback.
You are playing a blank or poor quality portion of the tape. You can damage the unit if you play dirty or damaged tapes and this can cause the grey background to appear.
Cannot hear the desired audio type.
Press and hold [STTL ] for about 5 or more seconds to select the audio. ( 41)
Timer recording does not work properly.
The timer programme is incorrect or different timer programme times overlap. Correct the programme. ( 34) The programme is not in timer recording standby. (F in the timer recording list is not on.) ( 34) 1 Press [PROG/CHECK]. 2 Press [3, 4] to select the programme and press the Red button. The clock is not correct. Set the clock. ( 14) The programme information in the GUIDE Plus+ system may not be correct. It is recommended to modify the start and end times to allow a margin of a few minutes. ( 23)
There is noise when playing a video tape.
Adjust the tracking. ( 41) The tape is old or damaged.
The playback screen flickers.
The video head is dirty. ( 6) The tape is old or damaged. Check the SQPB setting. ( 71)
Timer recording does not stop even when  is pressed.
When using the linked timer recording with external equipment, press [EXT LINK]. (EXT-L on the units display disappears.) ( 31) If you start recording immediately after turning on the unit while Power Save in Standby is not activated in the Setup menu (Quick Start mode), you cannot then stop recording for a few seconds. Make sure that the recording drive is selected. Press [DRIVE SELECT] to select the recording drive. ( 22)
The timer programme remains even after recording finishes.
The timer programme remains if set to daily or weekly timer recording. ( 33, 34)
(Back of product)
(Inside of product) For your safety, be sure not to connect or handle the equipment with wet hands.
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. USE ONLY THE RECOMMENDED ACCESSORIES. DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturers instructions.
THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.
This product may receive radio interference caused by mobile telephones during use. If such interference is apparent, please increase separation between the product and the mobile telephone.
The socket outlet shall be installed near the equipment and easily accessible. The mains plug of the power supply cord shall remain readily operable. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from AC receptacle.
Information for Users on Collection and Disposal of Old Equipment and used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC. By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
Environment friendly printed on chlorine free bleached paper.
Panasonic Corporation Web Site: http://panasonic.net
Pursuant to at the directive 2004/108/EC, article 9(2) Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany Panasonic Corporation 2009
Suchlauf Kanal Kan 5 Sendername ABC ABC Typ Qualitt 9 TV Daten 9
Letterbox: When connected to a 4:3 aspect television. 16:9 picture is shown in the letterbox style ( 85). When television picture appears, set up is complete. If the confirmation screen of GUIDE Plus+ data download appears, perform the following steps. (For information about GUIDE Plus+ system 21)
Press [2, 1] to select Ja and press [OK].
Gewhltes Land : XXXXXX Dieses Gert aktualisiert die GUIDE Plus+ Daten mehrmals pro Tag.
Press the numbered buttons or [3, 4, 2, 1] to enter your postal code and press [OK].
GUIDE Plus+ data download starts. This takes about 30 minutes. When the download has finished
Set up is complete.
To stop partway Press [RETURN ].
Press [3, 4] to select Ein, Aus or Zeitauswahl and press [OK] when the Energiesparmodus setting menu appears.
Von 0 :00 Ein
If the clock setting menu appears
Set the clock manually ( 67).
To confirm that stations have been tuned correctly ( 63) To restart set up ( 62)
[For]Germany[and]Austria[ On screen messages are displayed in German in the factory preset. After completing step 6, change the on-screen display to English in the following steps. 1 Press [FUNCTION MENU]. 2 Press [3, 4] to select Weit. Funktionen and press [OK]. 3 Press [3, 4] to select Setup and press [OK]. 4 Press [3, 4] to select Display and press . 5 Press [3, 4] to select Sprachauswahl and press [OK]. 6 Press [3, 4] to select English and press [OK]. 7 Press [EXIT].
Bis 6 :00
Ein It will go into the Power Save in Standby mode (On): when the unit is in standby mode. Aus It is possible to start quickly from the standby mode. (Off): (Quick Start mode) Zeitauswahl (On Timer): Press [3, 4, 2, 1] to set the start and stop time and then press [OK]. Energiesparmodus is set to activate during the setting time period.
Minimiert Stromverbrauch im Standby-Modus d hD ki i d S h ll
Discs you can use for recording and play
(: Possible, : Impossible) Disc type Standard symbol DVD-RAM [RAM] Logo Data that can be recorded and played Video Still picture Rewritable Play on other players1 Recording 16:9 Recording both M 1 aspect picture2 and M 2 for bilingual broadcasts2 (Analogue broadcast only) Copy-once recording (CPRM)
CPRM ( 85) compatible discs only. Quick Start Guide
DVD-R [-R] before finalisation [DVD-V] after finalisation DVD-R DL [-R]DL] before finalisation [DVD-V] after finalisation
3 (Either one) 3 (Either one)
DVD-RW [-RWV] before finalisation [DVD-V] after finalisation +R [+R] before finalisation [DVD-V] after finalisation +R DL [+R]DL] before finalisation [DVD-V] after finalisation +RW [+RW]
Disc PAL NTSC PAL NTSC PAL NTSC
Yes/No 1 (PAL60) 2
If your television is not equipped to handle PAL 525/60 signals the picture will not be shown correctly. 2 Select NTSC in TV System ( 66). When playing back a disc, ensure that you match the TV System setting to the disc (PAL or NTSC) ( 66).
USB memory information
USB memories you can use on this unit
Compatible USB memories USB memories which are defined as USB mass storage class, and digital cameras that use PTP protocol: USB memories that support USB 1.0/1.1 and USB 2.0 Full Speed/High Speed. USB memories of up to 128 GB can be used. USB memories that support bulk only transfer. CBI (Control/Bulk/Interrupt) is not supported. Digital Cameras which require additional programme installation when connected to a PC are not supported. MTP (Media Transport Protocol) device is not supported. A multi-port USB card reader is not supported. Format FAT16 and FAT32 file systems are supported. UDF/NTFS/exFAT file system is not supported. Depending on the sector size, some files may not work. Only the first partition on USB memories with multi-partition is supported. Indicated in these instructions by [USB] Data that can be played or copied (: Possible, : Impossible) File format DivX MP3 Still pictures (JPEG) Playing Instructions You can play DivX files recorded You can play MP3 files recorded You can play and copy to DVDwith a computer onto the USB with a computer onto the USB RAM still pictures recorded with a memory ( 39). memory ( 38). computer onto the USB memory ( 40, 55).
DivX VOD contents recorded on USB memories cannot be played back. ( 39) Despite meeting the conditions mentioned above, there may be USB memories that cannot be used for this unit.
This units USB port does not support bus-powered USB device.
Regarding DivX files, Music files and still pictures (JPEG)
DivX Playable media File format Number of folders Number of files Support version [-R] [-R]DL] [CD] [USB]1 DivX Files must have the extension.DIVX,.divx,.AVI or.avi. Maximum number of folders recognizable: 300 folders (including the root folder) Maximum number of files recognizable2: 200 files Certified to the DivX Home Theater Profile V3.0. Video Number of stream: Up to 1 Codec: DIV3, DIV4, DIVX, DXk 16 to 720 k 576 (25 fps) 16 k 16 to 720 k 480 (30 fps) Aspect Ratio: 10:11, 40:33, 16:11, 12:11, 1:1 Audio Number of stream: Up to 8 Format: MP3, MPEG, Dolby Digital Multi channel: Dolby Digital is possible. MPEG multi is 2 ch conversion. Bitrate: 16 kbps to 320 kbps (MP3/MPEG), 32 kbps to 448 kbps (Dolby Digital) Sampling frequency.: 16 kHz/22.05 kHz/24 kHz/ 32 kHz/44.1 kHz/48 kHz (MP3/MPEG)/32 kHz/ 44.1 kHz/48 kHz (Dolby Digital) [-R] [-R]DL] [CD] [USB] MP3 Files must have the extension.mp3 or.MP3. Maximum number of folders (groups or albums) recognizable: 300 folders (groups or albums) (including the root folder) Maximum number of files (tracks) recognizable2: 3000 files (tracks) 32 kbps to 320 kbps 16 kHz/22.05 kHz/24 kHz/32 kHz/44.1 kHz/48 kHz compatible ([USB]) [-R] [-R]DL] [CD] Compatible formats: ISO9660 level 1 or 2 (except for extended formats) and Joliet This unit is compatible with multi-session/border (except for DVD-R DL), but reading or play of the disc may take time if there are a lot of sessions. Operation may take time to complete when there are many files (tracks) and/or folders (groups or albums) and some files (tracks) may not display or be playable. English alphabet and Arabic numerals are displayed correctly. Other characters may not be displayed correctly. The display order on this unit may differ from how the order is displayed on a computer. Depending on how you create the disc (writing software), files (tracks) and folders (groups or albums) may not play in the order you numbered them. This unit is not compatible with packet-write format. Depending on the recording conditions, the disc may not be played. [RAM] Compatible formats: DCF5 compliant (Content recorded on a digital camera, etc.) 5 Design rule for Camera File system: unified standard established by Japan Electronics and Information Technology Industries Association (JEITA).
This unit cannot record NTSC signals to discs that already have PAL signal recordings.
Copying from a video cassette recorder
e.g., Connecting to the AV3 input terminals on the front Turn off the unit and other video equipment before connecting. Connect to terminals of the same colour. Refer to Connecting a television and VCR or digital satellite receiver when connecting to the AV2 input terminals on the rear panel. ( 72) This unit
Press [INPUT SELECT] to select the input channel for the equipment you have connected.
e.g., If you have connected to AV3 input terminals, select AV3.
Recording to DVD
[RAM] [-R] [-R]DL] [-RWV] [+R] [+R]DL] [+RW] Perform step 1 ( above).
L/MONO - AUDIO- R
Start play on the other equipment.
When you want to start recording
Press [ REC].
S Video cable Other video equipment
Recording to VHS
[VHS] Perform step 1 ( above).
Connect to Audio/Video output terminals. If the audio output of the other equipment is monaural Connect to L/MONO on the AV3 input terminals at the front. The S VIDEO terminal achieves a more vivid picture than the VIDEO terminal. About the aspect when recording a programme ( 24)
Start playing the video cassette and find the recording start point.
[RAM] [-R] [-R]DL] [-RWV] [+R] [+R]DL] [+RW] [VHS] Preparation Press [DRIVE SELECT] to select the DVD or VHS drive. Press [REC MODE] to select the recording mode. When recording bilingual programmes, select M 1 or M 2 on the external equipment ( 24, Notes for recording). When the output signal from the external equipment is NTSC, change the TV System to NTSC in the Setup menu ( 66). This unit cannot record NTSC signals to discs that already have PAL signal recordings. To reduce noise in input from a video cassette recorder, set Copy NR to On in the on-screen menu ( 56). Check the time on the unit is correct.
Press [;] at the point where you want to start recording.
To skip unwanted parts Press [;] to pause recording. (Press again to restart recording.) To stop recording Press . Almost all videos and DVD-Video on sale have been treated to prevent illegal copying. Any software that has been so treated cannot be recorded using this unit. [RAM] [-R] [-R]DL] [-RWV] [+R] [+R]DL] [+RW] Using Flexible Recording ( 27), you can record the content of a video cassette (approx. 18 hours) to a 4.7 GB disc with the best possible quality of recording without wasting disc space.
If it becomes time for a timer recording to start while copying, the recording will start and the copying will stop. If video is copied from another piece of equipment to this unit, then the video quality will be degraded. [VHS] It is not possible to record SECAM signal on a video cassette.
To release the unit from recording standby
Press [3, 4] to select the programme and press the Red button. The timer icon F disappears from the timer recording list. You cannot cancel timer recording standby mode as long as even one timer icon F remains in the timer recording list. Press the Red button again to activate timer recording standby.
To resolve overlapping
Press [3, 4] to select the programme with and press [OK]. If the Overlapped Timer Recording screen appears ( right) If the on-screen instructions do not appear, change or delete the overlapped programme.
To exit the timer recording list
Programmes that failed to record are deleted from the timer recording list at 4 a.m. two days later.
Language for digital broadcast with multi-audio or multi-subtitle (Digital broadcast only)
Selecting the programme from the desired programme type or category
This function lets you display a TV Guide list sorted by programme type, etc. While the TV Guide list is displayed
Searching desired programmes on TV Guide list by words
By entering words, you can search for programmes from the TV Guide list using the programme information. While the TV Guide list is displayed
Press the Yellow or Blue button. Press [3, 4, 2, 1] to select the desired item.
Select Advert Free Word Search
A list appears with all programmes of the selected item. When you select the Landscape view, the unit displays programmes in grey that do not belong to the selected programme type.
TV Guide: Landscape Wed 13.10.10 12:53 Wed 13.10. News All Channels
All Types Movie News Entertainment S
Press [3, 4] to select Free Word Search and press [OK]. Enter the word you would like to search for and set.
Entry method 45, Entering text
Free Word Search
Simplified Search Detailed Search
Detailed Search may result in many hits, but search time will be longer.
Press [3, 4] to select Simplified Search or Detailed Search and press [OK].
Simplified Search: It searches the programme names only. Detailed Search: It searches all the information on the programmes. It might take more time to search the desired programme.
TV Guide: Portrait Wed 13.10.10 12:53 Wed 13.10.
1 ARD ARD
e.g., Programme type, News is selected in step 2 of Landscape view.
Press and hold to change in succession forward or backward. Press  (PLAY) to restart play. [VCD] Forward direction  (;1) only.
Selecting recorded programmes (titles) to playDIRECT NAVIGATOR
[RAM] [-R] [-R]DL] [-RWV] [+R] [+R]DL] [+RW] [-RWVR] You can quickly find the recorded titles and easily play them. DIRECT NAVIGATOR screen icons [ Currently recording. Title protected. Title that was not recorded due to recording protection (Digital broadcasts etc.) Title cannot be played [When data is damaged etc.] Title with One time only recording restriction ( 85, CPRM) Title recorded using a different encoding system from that of the TV system currently selected on the unit. Alter the TV System setting on this unit to suit ( 66).
Press [DIRECT NAVIGATOR].
[RAM] When VIDEO is not selected, press the Red button to select VIDEO.
Press [3, 4, 2, 1] to select the title and press [OK].
You can also select titles with the numbered buttons. e.g., 5:   15:  
To show other pages Press [3, 4, 2, 1] to select Previous or Next and press [OK]. You can also press [:, 9] to show other pages. To exit the screen Press [DIRECT NAVIGATOR].
Advanced video cassette playback
Operations Stop Pause Fast-forward/Rewind Cue/Review Jet Search
Press . Press [;].
Press [;] again or  (PLAY) to restart play. While stopped During play
Press  (backward)/ (forward).
If you keep pressing these buttons, normal playback restarts by releasing them. Tap  (PLAY) to restart normal playback.
Tap or keep pressing  (backward)/ (forward).
Tap  (backward)/ (forward) once (approx. 27 times speed) or twice (approx. 35 times speed). You can increase Cue/Review search speed.
Press  (PLAY) to restart normal playback. You can select search speed to view the recorded picture. The picture recorded in EP or AUTO mode may be distorted if it is played at approx. 35 times speed. A vertical scroll may occur. It is not a malfunction but if it happens, change to approx. 27 times speed. The picture may not be in colour or may be distorted depending on the TV. During play
Slow Jet Rewind
Press and hold [;] for about 2 seconds or more.
Press  (PLAY) to restart normal playback. To perform a Higher Speed Rewind
What is Q Link?
Q Link is a convenient function that offers linked operations of this unit and a Panasonic TV. You can use this function by connecting the equipment with a fully wired 21-pin Scart cable. Preparation Connect this unit to your TV with a fully wired 21-pin Scart cable ( 8).
For your reference The following systems from other manufacturers have similar function to Q Link from Panasonic. For details, refer to your televisions operating instructions or consult your dealer. Q Link (registered trademark of Panasonic) DATA LOGIC (registered trademark of Metz) Easy Link (registered trademark of Philips) Megalogic (registered trademark of Grundig) SMARTLINK (registered trademark of Sony)
What you can do with HDAVI Control and Q Link
Download from the TV1
When you connect the unit to a TV for the first time, the station list data etc. are automatically copied from the TV to the unit and the TV stations are assigned to the programme positions on the unit in the same order as on the TV ( 10).
When the TV is on and the following operations are performed, the TVs input will automatically switch to HDMI input mode ([VIERA]Link]) or AV input mode ([Q]Link]) and the TV displays the corresponding action. (Picture or sound may not be available for the first few seconds.) Press [FUNCTION MENU]2,  (PLAY)3, [DIRECT NAVIGATOR], [GUIDE], [ShowView]4, [PROG/CHECK] etc.
Power on link
When the TV is off and the following operations are performed, the TV will automatically turn on and displays the corresponding action. (Picture or sound may not be available for the first few seconds.) Press [FUNCTION MENU]2,  (PLAY)3, [DIRECT NAVIGATOR], [GUIDE], [ShowView]4, [PROG/CHECK] etc. [DVD-V] [CD] [VCD] [VHS] SVCD and MP3 The TV is automatically turned on when you insert the discs or VHS.
Power off link
When you set the TV to standby mode, the unit is also automatically set to standby mode. The unit is automatically set to standby mode even if the FUNCTION MENU etc. is displayed during playback or when the unit set to a timer recording. Even if the TV is set to standby mode, the unit will not be set to standby mode at the same time when recording, copying, finalising etc. When this unit is connected to an HDAVI Control compatible Panasonic receiver with an HDMI cable, the receiver will also turn off.
The disc top menu is displayed. Disc play automatically begins from title 1 when Title 1 is selected from the Auto-Play Select menu when finalising the disc ( 59).
Copying still pictures
[RAM] [USB] > [RAM] [RAM] > [RAM] After performing steps 13 ( 52, Copying Titles or Playlists (DVD > VHS))
Press [3, 4] to select Start Copying and press [OK].
Only when copying individual still pictures. When specifying another folder as the copying destination, select Folder.
Folder New folder
001 100__DVD 002 101__DVD 003 102__DVD --- New folder ---
Set Source and Destination to DVD. (Go to step 4)
[USB] > [RAM]
Make a new folder and dub ?
Insert the USB memory (
The menu is automatically displayed. (
Press [2, 1] to select Yes and press [OK] to start copying.
] for 3 seconds.
Press [3, 4] to select Picture ( JPEG ) and press [OK]. Press [3, 4] to select Copy Selected Pictures ( JPEG ) and press [OK].
Source, Destination, Format and Recording Mode are automatically set to USB, DVD, PICTURE and High Speed respectively.
To stop copying Press and hold [RETURN
To return to the previous screen Press [RETURN ].
PICTURE High Speed
Copy Mode is fixed at PICTURE High Speed. The structure of folders on the USB memory may not be the same at the copy destination. The sequence in which the still pictures are registered on the copy list may not be the same at the copy destination. If the space on the destination drive runs out or the number of files/ folders to be copied exceeds the maximum ( 14), copying will stop partway through. You cannot copy the information about the picture rotation. To show other pages Press [3, 4, 2, 1] to select Previous or Next and press [OK]. You can also press [:, 9] to show other pages.
Register still pictures for copy.
If you are going to copy a registered list without making any changes to it ( step 5). You can register still pictures or still picture folders. Still pictures and folders cannot be registered on the same list.
Picture menuChange the picture quality
Playback NR Reduces noise and picture degradation while playing. On: Reduces noise and picture degradation. Off: Video is played back as it is. Copy NR Reduces the noise while copying (Except analogue channels). Automatic: Noise reduction only works on picture input from a video tape. On: Noise reduction works for input video. Off: Noise reduction is off. You can record the input signal as it is.
With some discs, you may only be able to make changes using the menus ( 18) on the disc. The display changes according to the disc content. You cannot change when there is no recording.
Sound menuChange the DVB multi audio and sound effect
DVB Multi Audio [Digital channel only] If more than one audio channel is output, you can set the desired channel before recording. DVB Multi Audio cannot be selected during playback or recording. Depending on the broadcast, the items that can be selected will differ. English German Italian French Spanish Catalan Basque Galician Corsican Original Original is displayed when the original language is available in a broadcast. Dialogue Enhancer [RAM] [-R] [-R]DL] [-RWV] [+R] [+R]DL] [+RW] [DVD-V] [-RWVR] and DivX (Dolby Digital, 3-channel or over only, including a centre channel) The volume of the centre channel is raised to make dialogue easier to hear.
Status messages Press [STATUS ].
The display changes each time you press the button. (e.g., [RAM]) Selected drive status/type of disc or USB memory The remaining time appears here while stopped. Recording or play status/input channel Channel (Analogue broadcast only) The name of the station (Digital broadcast only). Selected audio type Recording drive/Copy progress indicator
DVD-RAM REC PLAY 1 DVB ABC LR VHS REC
Title number and elapsed time during play/ Recording mode Available recording time and recording mode Date and time
18:53:50 11.10. T1 0:05.14 XP Remain T2 13:50 XP 0:00.10 XP
Other menuChange the DVB subtitle and display position
DVB Subtitles [Digital channel only] You can set the desired subtitles if more than one subtitle track can be selected. DVB Subtitles cannot be selected during playback or recording. Depending on the broadcast, the items that can be selected will differ. English German Italian French Spanish Catalan Basque Galician Corsican Original Original is displayed when the original language is available in a broadcast. Position 15: The higher the setting the lower the on-screen menu moves.
Title number and elapsed time during recording/ Recording mode
No display ([VHS] during playback) Changing audio ( 37)
VHS drive indicator
When finalising a high-speed recording compatible disc, it may take longer than displayed on the confirmation screen (approximately four times). After finalising [-R] [-R]DL] [+R] [+R]DL] The disc becomes play-only and you can no longer record or edit. [-RWV] You can record and edit the disc after formatting ( 59) although it becomes play-only after finalising. Chapters are created automatically ([-R] [-R]DL] [-RWV]: about 5-minute chapters/[+R] [+R]DL]: about 8-minute chapters). This time varies greatly depending on the condition and mode of recording. There is a pause of several seconds between titles and chapters during play. Before finalising After finalising
You can record or edit discs after creating the Top Menu. But the created menu is deleted when you record or edit disc. In such cases, create the Top Menu again by using Create Top Menu. To return to the previous screen Press [RETURN ]. To exit the screen Press [EXIT].
Recording/Editing/Entering name Play on other players
You cannot finalise discs recorded on other manufacturers equipment. Discs finalised on this unit may not be playable on other players due to the condition of the recording. Visit Panasonics homepage for more information about DVDs. http://www.panasonic-europe.com
Close First Layer
[-R]DL] [+R]DL] DVD-R DL and +R DL discs have two layers of recordable surfaces on one side. This unit does not offer seamless recording between the two layers. Recording stops when space on the first layer is full. The first layer must be closed to start recording on the second layer. Closing the first layer makes it unavailable for recording (editing is still possible). You cannot cancel closing. Make certain before proceeding. After performing steps 13 ( 58, Common procedures)
Press [3, 4] to select Close First Layer and press [OK]. Press [2, 1] to select Yes and press [OK]. Press [2, 1] to select Start and press [OK].
Closing the layer starts. You cannot cancel closing. Closing a layer can take a few minutes or up to a maximum of 30 minutes, depending on the remaining space on the disc.
Do not disconnect the AC mains lead while closing. This can render the disc unusable.
To confirm the remaining recording time on the layer
Titles Used : 00 Remain 3:54(LP) of the first layer
Disc Name Auto-Play Select D l t ll titl Top Menu
You cannot close the first layer when there are no recordings on it.
Changing the units settings
You can change the units settings using Setup menu. The settings remain intact even if you switch the unit to standby. 3 Press [OK] to save the Favourite. Deleting a channel from a Favourite does not affect the channel itself. You can still select the channel from the All Channels category.
Press [FUNCTION MENU]. Press [3, 4] to select Others and press [OK]. Press [3, 4] to select Setup and press [OK].
[On] When this unit is not operated for approximately 5 minutes while the screen is being displayed, the screen saver is displayed. To return to the previous screen, press [OK].
Select how to output the signal. Select Bitstream if the connected equipment decodes the signal. Select PCM if this unit decodes the signal and outputs it as 2 channels. Not making the proper settings may result in noise. When connected to equipment with a built-in Dolby [Bitstream] Digital decoder. [PCM] When connected to equipment without a built-in Dolby Digital decoder.
[On] [Off] When the unit is turned on, the FUNCTION MENU will be displayed. ( 7)
Select how to output the signal. Select Bitstream if the connected equipment decodes the signal. Select PCM if this unit decodes the signal and outputs it as 2 channels. Not making the proper settings may result in noise. When connected to equipment with a built-in DTS [Bitstream] decoder. [PCM] When connected to equipment without a built-in DTS decoder.
Select how to output the signal. Select Bitstream if the connected equipment decodes the signal. Select PCM if this unit decodes the signal and outputs it as 2 channels. Not making the proper settings may result in noise. [Bitstream] When connected to equipment with a built-in MPEG decoder. When connected to equipment without a built-in [PCM] MPEG decoder. Refer to the operating instructions for connected devices to verify whether or not they can decode each of the audio formats.
Choose the audio type when recording or copying with XP mode. [Dolby Digital] ( 85) [LPCM] ( 85) The picture quality of LPCM recordings may be lower than that of normal XP mode recordings. The audio recording becomes Dolby Digital even if you selected LPCM when using a recording mode other than XP. When recording a bilingual broadcast, select the type of audio in advance from Bilingual Audio Selection ( above).
Audio Mode for XP Recording
(All factory default settings are indicated with underlined text.) Depending on the connected equipment, some items may be shaded in grey on the display and cannot be selected, or you may not be able to change the settings.
Set to match the type of television connected. [16:9] When connected to a 16:9 widescreen television. [Pan & Scan] When connected to a 4:3 aspect television, side picture is trimmed for 16:9 picture. [Letterbox] When connected to a 4:3 aspect television. 16:9 picture is shown in the letterbox style.
Time Slip, Manual Skip, etc. does not work.
These functions do not work with finalised discs. Time Slip does not work when the units TV System settings are different from the title recorded on the disc. ( 66)
Cannot delete chapters.
When the chapter is too short to delete, use Combine Chapters to make the chapter longer. ( 47)
It takes time before play starts.
This is normal on DivX video. (DivX)
Cannot create a Playlist.
You cannot select all the chapters at once in a title if the title also includes still pictures. Select them individually.
Picture may stop if the DivX files are greater than 4 GB. (DivX)
ID3 tag of a MP3 file is not completely displayed.
Only the track name ([USB]) can be displayed with this unit.
Cannot see the beginning of the title played.
(If connecting to a TV that supports VIERA Link with an HDMI cable) When  (PLAY) is pressed on this units remote control, you may not be able to see the beginning of the title played until the picture is displayed on the TV. Using [:], return to the beginning of the title.
Cannot display DIRECT NAVIGATOR screen.
This screen cannot be displayed during recording or copy or while the unit is standing by for linked timer recording with external equipment.
Copying, deleting and setting protection takes a long time.
When there are a lot of folders and files, it may sometimes take a few hours. When repeating copying or deleting, it may sometimes take a long time. Format the disc. ( 59)
Still pictures (JPEG) do not playback normally.
The images that were edited on the PC, such as PROGRESSIVE JPEG etc., may not playback. ( 14) Reference
On-screen display indicators do not appear.
Select a setting other than Off in On-Screen Messages in the Setup Menu. ( 65) Press [STATUS ] to show the on-screen display indicators. The on-screen indicator for video cassette playback will not be displayed when this unit is connected to the TV with the DVD priority out terminals.
The TV Guide System does not receive any data.
Check whether TV Guide system setup was performed in full. Check whether the clock is properly set. ( 67) If signal quality is bad (ghost images or limited reception), the TV Guide system may not be able to receive any data. In the area where GUIDE Plus+ system is available, check whether correct post code is entered. ( 68)
Others Region code: Operating temperature: Operating humidity range: Power supply: Power consumption: Dimensions (WkHkD):
Power consumption in standby mode: Approx. 0.5 W (Power Save in Standby is activated and RF OUT ( Aerial Signal ) is set to Off) Approx. 14 W (Power Save in Standby is not activated.)
Specifications are subject to change without notice. 1 Finalising is necessary for compatible playback. 2 Conforming to IEC62107 This unit is not compatible with Chaoji Video CD available on the market including CVD, DVCD and SVCD that do not conform to IEC62107.
Bitstream This is the digital form of multi-channel audio data (e.g., 5.1 channel) before it is decoded into its various channels. CPRM (Content Protection for Recordable Media) CPRM is technology used to protect broadcasts that are allowed to be recorded only once. Such broadcasts can be recorded only with CPRM compatible recorders and discs. Decoder A decoder restores the coded audio signals on DVDs to normal. This is called decoding. Deep Colour This unit incorporates HDMITM (V.1.3a with Deep Colour) technology that can reproduce greater colour gradation (4096 steps) when connected to a compatible TV. You can enjoy exceptionally rich, natural-looking colours, with smooth, detailed gradation and minimal colour banding. [A lower colour gradation (256 steps), without Deep Colour, will be reproduced if connected to a TV which does not support Deep Colour. The unit will automatically set appropriate output to suit the connected TV.] DivX DivX is a popular media technology created by DivX, Inc. DivX media files contain highly compressed video with high visual quality that maintains a relatively small file size. Dolby Digital This is a method of coding digital signals developed by Dolby Laboratories. Apart from stereo (2-channel) audio, these signals can also be multi-channel audio. A large amount of audio information can be recorded on one disc using this method. When recording on this unit Dolby Digital (2 channel) is the default audio. Down-mixing This is the process of remixing the multi-channel audio found on some discs into two channels. It is useful when you want to listen to the 5.1-channel audio recorded on DVDs through your televisions speakers. Some discs prohibit down-mixing and this unit can then only output the front two channels. Drive In the instance of this unit, this refers to the disc (DVD) and video cassette (VHS). These perform the reading and writing of data. DTS (Digital Theater Systems) This surround system is used in many movie theaters. There is good separation between the channels, so realistic sound effects are possible. Dynamic range Dynamic range is the difference between the lowest level of sound that can be heard above the noise of the equipment and the highest level of sound before distortion occurs. Dynamic range compression means reducing the gap between the loudest and softest sounds. This means you can listen at low volumes but still hear dialogue clearly. Film and video DVD-Videos are recorded using either film or video. This unit can determine which type has been used, then uses the most suitable method of progressive output. Film: Recorded at 25 frames per second (PAL discs) or 24 frames per second (NTSC discs). (NTSC discs recorded at 30 frames per second as well.) Generally appropriate for motion picture films. Video: Recorded at 25 frames/50 fields per second. (PAL discs) or 30 frames/60 fields per second (NTSC discs). Generally appropriate for TV drama programmes or animation. Finalise A process that makes play of a recorded CD-R, CD-RW, DVD-R, etc. possible on equipment that can play such media. You can finalise DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL on this unit. After finalising, the disc becomes play-only and you can no longer record or edit. However, finalised DVD-RW can be formatted for recording again. Folder This is a place on the disc where groups of data are stored together. In the case of this unit, it refers to the place where still pictures (JPEG) are stored.
DivX is a registered trademark of DivX, Inc., and is used under license.
Active Antenna. 66 Adjust the audio quality (Sound menu). 57 Adjust the picture quality (Picture menu). 56 Album (Still picture) Edit. 50 Play. 40 Angle. 56 Aspect. 10 Audio Digital broadcast (DVB Multi Audio). 16, 20, 57, 63 Playback. 34 Auto Standby. 68 AV2 Settings. 66 Change Thumbnail. 47 Channel Select. 16 Settings. 62, 63 Chapter. 34, 46 Chapter Creation. 46, 64 Chasing playback. 27 Child Lock. 69 Cleaning Disc. 15 Lens. 5 Main unit. 5 Video heads. 5 Clock Settings. 67 Connection Aerial. 8, 72 Amplifier, receiver. 70 Digital satellite receiver. 8, 72 HDMI. 9, 71 Television. 8, 9, 7072 Video cassette recorder. 72 Copy Still picture. 55 Title/Playlist. 52 Copy (playlist). 49 Country setting. 10 CPRM. 85 Create Chapter. 34, 47 Create playlists. 48 Delete Album (Still picture). 50 All titles. 59 Chapter. 47, 49 Playlist. 49 Still picture. 50 Title. 47 Digital Audio Output settings. 65, 66 Digital broadcast Digital channel information. 17 DVB Multi Audio. 16, 20, 57, 63 DVB Subtitle. 16, 20, 57, 63 New Channel. 17, 62 Recording. 19 Select the channel. 16 Signal Condition. 63 System Update. 68 Timer. 21 DIRECT NAVIGATOR. 35, 40, 46, 50 Discs. 1112 Display Digital channel information. 17 Status messages. 57 Divide Title. 47 DivX. 14, 39, 85 DVB Multi Audio Record with selected audio. 20 Select audio. 16, 57 DVB Subtitle Record with subtitle. 20 Select subtitle. 16, 57 Show subtitle. 16 Edit Chapter. Playlist. Still picture. Title. Enabling discs to be played on other equipment - Finalise. 60 Screen Saver. 65 Select channel. 16 Setup menu. 62 ShowView. 30 Signal Condition. 63 Simultaneous rec and play. 27 Slideshow. 40, 41 Soundtrack. 56, 64 Still picture Copy. 55 Edit. 50 Play. 40 Subtitle Digital broadcast (DVB Subtitle). 16, 20, 57, 63 Disc. 56, 64 Switch the audio/subtitles on the disc (Disc menu). 56 System Update. 68 Time Slip. 34 Tuning Analogue broadcast. 63 Digital broadcast. 62 List of TV Reception Channels. 74 TV Guide. 21, 33 TV System (PAL/NTSC). 66 USB Copy (Still picture). 55 Insert. 15 Play. 38 Supported formats. 13 VHS Copy. 22 Insert. 15 Jet Rewind. 36 Play. 18, 3637 S-VHS Quasi Playback (SQPB). 37, 67 VHS Index Search System (VISS). 37 VIERA Link. 9, 4243, 66, 71
6500C X-18H WAP-4000A 29DH55N Firin 32PW8807 12 Breast Pump Um 211 Drive WH105 242MP Siemens C60 Dmrex83 Software AVR-2106 EP-MVP3G XDP-U50D Canon S300 LQ-1070 Reflexes 600 E MG15fxmsdm Compact 330 Xpressmusic Finepix F401 DPF-D82 Aficio 180 Track USB Networks Switch CVP-309-CVP-307-cvp-305-cvp-303-cvp-301 Factor DKS-6000 CD2551S Vapor 300 CLP-910 3200F 20PF4110 KX-FP218FX KX-TC1486 125 ED ES-2024A Syncmaster 753V FS-1700- Super Fort KDC-MP632U PSR-730-PSR-630 69KPA 2450 Euro DPX-510 21PT5322 KX-TG6702 STR-K670P Frame I1032 SR-DVM70us-sr-dvm70 KDC-W4044U KHM 10 KRC-678RV G211 D IC-Q7E LE32A41B Euroset 5030 R-24STM Gamemaker Soaker TAG Coupe 29PT6447-55 Series N210-JB02 Kinderbot XS-AW5X Compressor NRL-LS533 95-82 Nuvi 205W Nikkor F1426 Evolution 4 37LG50D YZF-R1-2006 Sierra 1998 Quattro Tascam 246 ZC4001 LN32B460b2D DI251 Aficio1018 EMP-TWD10 AG-6024 Pslx520 RD-8504 AR-M236 M276 Gigaset CL1 CTS4000 G 1230 Yamaha FC7 Tecra S5 Pocket PC Jetdirect 615N
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101