SCBTT755_350EBGN_VQT2W23.book 1
Operating Instructions Blu-ray Disc Home Theater Sound System Model No. SC-BTT755 SC-BTT350
The illustration shows the image of SC-BTT755 for Australia and New Zealand.

Dear customer

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference.
Model number suffix EB denotes UK model.

VQT2W23

until 2010/07/13
SCBTT755_350EBGN_VQT2W23.book 2

Getting started

CAUTION!
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
[BTT755[for[Australia[and[New[Zealand] For wireless system Product Identification Marking is located on the bottom of the wireless system.
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS. DO NOT OBSTRUCT THE UNITS VENTILATION OPENINGS WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS. DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED CANDLES, ON THE UNIT. DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY FRIENDLY MANNER.

(Side of product)

WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. USE ONLY THE RECOMMENDED ACCESSORIES. DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES. This product may receive radio interference caused by mobile telephones during use. If such interference is apparent, please increase separation between the product and the mobile telephone. The socket outlet shall be installed near the equipment and easily accessible. The mains plug of the power supply cord shall remain readily operable. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from AC receptacle. Do not touch the speaker terminals while the set is operating. Malfunction may occur due to static electricity.

(Inside of product)

SCBTT755_350EBGN_VQT2W23.book 3
Caution for AC Mains Lead
(For the United Kingdom and Republic of Ireland) For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark or the BSI mark on the body of the fuse. If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local dealer. CAUTION! IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13-AMPERE SOCKET. If a new plug is to be fitted please observe the wiring code as stated below. If in any doubt please consult a qualified electrician. IMPORTANT The wires in this mains lead are coloured in accordance with the following code: Blue: Neutral, Brown: Live. As these colours may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black or Blue. The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Brown or Red. WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E, BY THE EARTH SYMBOL OR COLOURED GREEN OR GREEN/YELLOW. THIS PLUG IS NOT WATERPROOFKEEP DRY.

Before use Remove the connector cover. How to replace the fuse The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below. Illustrations may differ from actual AC mains plug. 1 Open the fuse cover with a screwdriver.

Figure A

Figure B Fuse cover
Replace the fuse and close or attach the fuse cover.

Figure B Fuse (5 ampere)

Fuse (5 ampere)
SCBTT755_350EBGN_VQT2W23.book 4

Safety precautions

Placement
Set the unit up on an even surface away from direct sunlight, high temperatures, high humidity, and excessive vibration. These conditions can damage the cabinet and other components, thereby shortening the units service life. Do not place heavy items on the unit.

Voltage

Do not use high voltage power sources. This can overload the unit and cause a fire. Do not use a DC power source. Check the source carefully when setting the unit up on a ship or other place where DC is used.

AC mains lead protection

Ensure the AC mains lead is connected correctly and not damaged. Poor connection and lead damage can cause fire or electric shock. Do not pull, bend, or place heavy items on the lead. Grasp the plug firmly when unplugging the lead. Pulling the AC mains lead can cause electric shock. Do not handle the plug with wet hands. This can cause electric shock.
Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC. By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. For business users in the European Union If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. [Information on Disposal in other Countries outside the European Union] These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. Note for the battery symbol (bottom two symbol examples): This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved.

DVD-Video [For[the[United[Kingdom[and[Republic[of[Ireland[ This unit plays DVD-Video marked with labels containing the region number 2 or ALL. Example:

USB device

This unit does not guarantee connection with all USB devices. This unit does not support USB device charging. FAT12, FAT16 and FAT32 file systems are supported. This unit supports USB 2.0 High Speed.
[For[Australia[and[New[Zealand] This unit plays DVD-Video marked with labels containing the region number 4 or ALL. Example:

Finalize

DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded by a recorder, etc. needs to be finalized by the recorder to play on this unit. Please refer to the recorders instructions.

BD-Video

3D videos can be played back when this unit is connected to a 3D compatible TV using a High Speed HDMI Cable. This unit supports high bit rate audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio) adopted in BD-Video. In order to enjoy these audio formats, refer to page 40.
It may not be possible to play the above media in some cases due to the type of media, the condition of the recording, the recording method and how the files were created. The producers of the disc can control how discs are played. So you may not always be able to control play as described in these operating instructions. Read the discs instructions carefully.
SCBTT755_350EBGN_VQT2W23.book 12
STEP 1: Preparing the speakers

Caution

The main unit and supplied speakers are to be used only as indicated in this setup. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance. Do not attempt to attach these speakers to walls using methods other than those described in this manual. Do not touch the front netted area of the speakers. Hold by the sides. [BTT755] 2 Front speakers 2 Surround speakers 4 Bases (RYK1610-K1) 8 Screws A (XTN5+10FFJK)
4 Stands (with cables) (RYK1609A-K: RED) (RYK1609-K: WHITE) (RYK1609C-K: GREY) (RYK1609B-K: BLUE) [BTT350] 5 Speaker cables (REEX1152A-1: RED) (REEX1153A-1: WHITE) (REEX1154-1: GREEN) (REEX1155-1: GREY) (REEX1156-1: BLUE)
1 Speaker cable (REEX1154-1: GREEN)

4 Screws B (XYN5+J18FJK)

Assembling the speakers [BTT755]
Do not stand on the base. Be cautious when children are near. When carrying speakers, hold the stand and base parts.

SCBTT755_350EBGN_VQT2W23.book 21

STEP 6: Easy setup

The Easy setup assists you to make necessary settings.
Follow the on-screen prompts to make basic settings for the system.
Press []. Follow the on-screen instructions and make the settings with [3, 4, 2, 1] and press [OK].
Language Select the language used on menu screen. TV Aspect Select the aspect to suit your TV and preference. Wireless System If a digital transmitter is inserted, it is required to specify the current settings. Speakers position Specify the positioning of the surround speakers. Speaker check Check if the connection to each speaker is valid.
Speaker Output Make surround sound setting for speaker output. TV Audio Select the audio input connection from your TV, [item with (TV)]. Quick Start Speed of startup from standby mode is increased.
Turn on your TV and select the appropriate video input mode (e.g., VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this unit.
Press [OK] several times to finish the Easy setup.
After completing Easy setup, you can perform Network Easy Setting.
You can perform this setup anytime by selecting Easy setup in the Setup menu. ( 42) Language and TV Aspect settings are automatically retrieved if this unit is connected to a Panasonic TV (VIERA) supporting HDAVI Control 2 or later via an HDMI cable.
SCBTT755_350EBGN_VQT2W23.book 22

Network Easy Setting

Select Wired or Wireless and press [OK].
Network Easy Setting (Connection Test)
Select a connection mode. Current setting : Wired LAN cable connection: Connect a LAN cable to the unit and select Wired. Wireless LAN connection: Connect the Wireless LAN Adaptor (DY-WL10) to the USB port and select Wireless.
2 Press [RETURN] and then press [OK]. Then select an item on the following screen which corresponds to the authentication type noted down in step 1 ( left).
Access Point Connection Setting
Select authentication type.
WPA2-PSK (AES/TKIP) WPA-PSK (AES/TKIP) Open/Shared Key (WEP) Open system

Wired Wireless

OK RETURN

Wired connection

Follow the on-screen instructions to make your connection settings. When you experience problems ( right)
Follow the on-screen instructions to make the settings. Input your encryption key code in Encryption Key supplied with your Wireless router (Access point).

Wireless connection

If you select Wireless and Wireless LAN Adaptor is not connected. is displayed, check that the Wireless LAN Adaptor is fully inserted. Alternatively, disconnect and reconnect it. If there is still no change in the display, consult your dealer for advice.
Wi-Fi Protected Setup-compatible Wireless router (Access point) may have the mark. An SSID (Service Set IDentification) is a name used by wireless LAN to identify a particular network. Transmission is possible if the SSID matches for both devices.

Press [3, 4] to select the menu and press [1]. Press [3, 4, 2, 1] to select the item and press [1]. Press [3, 4] to select the setting.

VIERA CAST Home screen;

Weather
Some items can be changed by pressing [OK]. To exit the screen Press [DISPLAY]. Depending on the condition of the unit (playing, stopped, etc.) and media contents, there may be some items that you cannot select or change. Regarding Language, Audio attribute and Video attribute: ( 50)

London, United Kingdom

Setup & Help

TOMORROW

NW 10 km/h H L

XXXXXX

Featured Videos

Featured Photos

MORE BACK

COMING SOON

Signal Type
Primary Video Video Soundtrack The recording method of original video appears. Select the type of audio or language.
Images are for illustration purposes, contents may change without notice. To return to VIERA CAST Home screen Press [VIERA CAST]. To exit from VIERA CAST Press [EXIT], [START] or [TOP MENU/DIRECT NAVIGATOR]. When the Blu-ray disc logo is selected on the Home screen, the playback source will be changed and go back to the source previously selected.
Secondary Video Video Select on/off of images. The recording method of original video appears. Select on/off of audio and the language.
In the following cases, settings are possible using Internet Content Settings ( 42) When restricting the use of VIERA CAST. When the audio is distorted. When wrong time is displayed If using slow Internet connection, the video may not be displayed correctly. A high-speed Internet service with a speed of at least 6 Mbps is recommended. Be sure to update the firmware when a firmware update notice is displayed on the screen. If the firmware is not updated, you will not be able to use the VIERA CAST function. ( 23) VIERA CAST home screen is subject to change without notice. The services through VIERA CAST are operated by their respective service providers, and service may be discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no warranty for the content or the continuity of the services. All features of websites or content of the service may not be available. Some content may be inappropriate for some viewers. Some content may only be available for specific countries and may be presented in specific languages.

Press [OK] to show the following settings: Lock You can restrict using VIERA CAST. Follow the on-screen instructions. Enter the 4-digit password with the number buttons when the password screen is shown. Audio Auto Gain Control Volume that is different depending on the contents is adjusted automatically to the standard volume while using the VIERA CAST. Depending on contents, this function effect will not work. Select Off when the audio is warped. Time Zone By selecting the time zone, it is possible to set the units time to match your location. Some VIERA CAST contents require the time zone to be set. Set the time zone if necessary. Summer Time Select On when using Daylight Saving time.
MAC Address Displays the MAC address of this unit.
SCBTT755_350EBGN_VQT2W23.book 43

Speaker settings

Delay time (

ms 0.0

B Surround speakers / Surround back speakers Difference Setting 5.0 ms 10.0 ms 15.0 ms
Approx. 170 cm Approx. 340 cm Approx. 510 cm
For optimum listening with 5.1-channel sound, all the speakers, except for the subwoofer, should be the same distance from the seating position. If either distance A or B is less than C ( below), find the difference in the relevant table and adjust the delay time to make up for the difference.
When using the 7.1ch speaker system
1 Check the distance difference of both the front speakers and the surround back speakers from the seating position. 2 Set the delay time of the surround back speakers.

Adjusting speaker level

Volume (Channel balance) (
(Effective when playing multi-channel audio)
A B C: Primary listening distance A Approximate room dimensions B Actual speaker position C Ideal speaker position D Circle of constant primary listening distance
Select Test and press [OK].
A test signal is output. While listening to the test signal
Press [3, 4, 2, 1] to select the distance box ( ms ) and press [OK]. 0.0

e.g., 5.1ch setting

dB 0 dB 0
Press [3, 4] to adjust the volume of each speaker.
The volume can be adjusted between r6 dB and s6 dB. Set each speaker level according to the volume of the Front (L) and Front (R) speaker volume respectively.

Complete Test

dB 0 LS
The test signal stops. e.g., 5.1ch setting

dB 0 RS

A Centre (C) B Test C Left Surround (LS), Right Surround (RS) To finish the speaker setting Press [3, 4, 2, 1] to select Complete and press [OK].
C Left Surround back (LB), Right Surround back (RB)
A Centre speaker Difference Approx. 34 cm Approx. 68 cm Approx. 102 cm Approx. 136 cm Approx. 170 cm Setting 1.0 ms 2.0 ms 3.0 ms 4.0 ms 5.0 ms
A Centre (C) B Left Surround (LS), Right Surround (RS) e.g., 7.1ch setting
SCBTT755_350EBGN_VQT2W23.book 44
Speaker installation option

[BTT755]: Centre speaker

Attaching to a wall
You can attach all of the speakers (except subwoofer) to a wall. The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg per screw. Consult a qualified building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers. Do not attempt to attach these speakers to walls using methods other than those described in this manual.
[BTT350]: Centre speaker I J K L M N 18.8 mm 117 mm 209 mm to 211 mm 97 mm 17 mm 99 mm to 101 mm
Drive a screw (not supplied) into the wall.

A B C D E

At least 30 mm 4.0 mm 7.0 mm to 9.4 mm Wall or pillar 5.5 mm to 7.5 mm
To avoid speaker dropping
[BTT755]: Front speaker, Centre speaker, Surround speaker e.g., [BTT755] Front speaker
DO A B C D String (not supplied) Screw eye (not supplied) Less than 10 cm Rear of the speaker
Fit the speaker securely onto the screw(s) with the hole(s).
e.g., [BTT755] Front speaker DO NOT
In this position, the speaker will likely fall if moved to the left or right.
Move the speaker so that the screw is in this position.
Consult a qualified building contractor to avoid damage to the wall or speakers. Use a string of less than 2.0 mm, which is capable of supporting over 10 kg.
[BTT755]: Front speaker, Surround speaker Attach to a wall without the base and the stand.
[BTT350]: Front speaker, Surround speaker F 97 mm G 210 mm to 212 mm H 26 mm
SCBTT755_350EBGN_VQT2W23.book 45

Troubleshooting guide

Before requesting service, please perform the following steps. Do you have the latest firmware installed?
Firmware updates may be released to correct operating irregularities that are discovered with certain movies. ( 23) 4
You have forgotten your ratings password. You want to cancel the ratings level. While the disc tray is empty and BD/DVD is selected as a source, press and hold [SKIP:] on the remote control and [1] (Play) on the unit at the same time for more than 5 seconds. The ratings level returns to the factory preset.
No power. Insert the AC mains lead securely into a household mains socket. ( 20) The unit switches to standby mode. When the time set for the sleep timer has passed, the main unit will be turned off. ( 8) One of the units safety devices is activated. Press [/I] on the main unit to turn the unit on. The main unit is turned off when the input for the TV is changed. This is a normal phenomenon when using VIERA Link (HDAVI Control 4 or later). For details please read the operating instructions for the TV.

Make the following checks. If the problem remains unresolved, consult your dealer for instructions.
The following do not indicate a problem with this unit: Regular disc rotating sounds. Image disturbance during search. Image disturbance when replacing 3D discs.
Unit doesnt respond to remote control or front panel buttons.
Press and hold [/I] on the main unit for 5 seconds. jIf still unable to turn the unit off, disconnect the AC mains lead, wait 1 minute, then reconnect the AC mains lead.

Cannot eject disc.

The unit may have a problem. While the unit is off, press and hold [SKIP9] on the remote control and [< OPEN/CLOSE] on the unit at the same time for more than 5 seconds.

Displays

The display is dim. Change FL Display in the Setup menu. ( 41)

General operation

To return to the factory preset. Select Yes in Default Settings in the Setup menu. ( 42)

TV screen and video

The images from this unit do not appear on the TV. Picture is distorted. Jittering occurs. An incorrect resolution is selected in HDMI Video Format. Reset the setting as follows: While the disc tray is empty and BD/DVD is selected as a source, press and hold [1] (Play) and [] (Stop) on the main unit at the same time for more than 5 seconds to cancel the setting. When Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio are not output in bitstream, select Yes in Default Settings and make proper settings. ( 42) The unit and television are using different video systems. While stopped, keep pressing [] (Stop) and [< OPEN/ CLOSE] on the main unit for 5 or more seconds. The system switches from PAL to NTSC or vice versa. The system used on the disc doesnt match your television. jPAL discs cannot be correctly viewed on an NTSC television. jThis unit can convert NTSC signals to PAL60 for viewing on a PAL television (NTSC Contents Output in the Picture). When Playback method for 3D disc in the Setup menu is set to 3D Playback, images may not output depending on the connection method. Remove the disc from this unit and select 2D Playback.( 39) When playing back a 3D disc, audio can be heard but no video image on the TV. Change the video input mode to the suitable HDMI video input mode on the TV.
To return all settings to the factory preset. Reset the unit as follows: While the unit is off, press and hold [+ VOLUME], [< OPEN/ CLOSE] and [/I] on the main unit at the same time for more than 5 seconds. The remote control doesnt work properly. The remote control and main unit are using different codes. Change the code on the remote control. ( 24) It may be necessary to set the code of the remote control again after changing the batteries for the remote control. ( 24) Disc cannot be played. The disc is dirty. ( 7) Check the region code. Still pictures (JPEG) do not playback normally. The images that were edited on the PC, such as Progressive JPEG, etc., may not playback. The TV tuner mode is not displayed when the TV is switched on. This phenomenon may occur, depending on the TV setting, when Quick Start is set to On. Depending on the TV, this phenomenon may be prevented by reconnecting the HDMI cable to a different HDMI input terminal or by changing the HDMI auto connection setting. The contents of the USB device cannot be read. If inserted during playback, the USB device may not be recognised by this unit.

Other difficulties with playback
BD-Video or DVD-Video is not played. Ensure the disc is for the correct BD-Video region code or DVD-Video region number, and is not defective. ( 11) You have set a ratings level to limit BD-Video or DVD-Video play. Change this setting. ( 39) Some BD-Video can only be output with HDMI. I cant play back BD-Live. The SD card is write-protected. ( 11) Confirm that this unit is connected to the broadband Internet. ( 19) Confirm the BD-Live Internet Access settings. ( 40) Confirm an SD Card is inserted into the SD Card slot. ( 24) Alternative soundtrack and subtitles cannot be selected. The languages are not recorded on the disc. You may not be able to use the playback menu to change the soundtrack and subtitles on some discs. Use the discs menus to make changes. ( 27) Angle cannot be changed. Angles can only be changed during scenes where different angles are recorded.
I cant connect to the network. Confirm the network connection and settings. ( 19, 42) Check the operating instructions for each device and connect accordingly. When using Wireless LAN connection, video or audio from the DLNA Certified media server is played back intermittently, not played back or video frames are dropped during playback. Higher transfer rate router such as 802.11n (2.4 GHz or 5 GHz) Wireless router (Access Point) may solve the problem. If you use 802.11n (2.4 GHz or 5 GHz) Wireless router (Access Point), it is necessary to set the encryption type to AES. Simultaneous use with a microwave, cordless telephone etc. at 2.4 GHz may result in connection interruptions or other problems. On the Access Point Connection Setting screen ( 42), the continuous lighting of at least 4 Reception indicators is the target for a stable connection. If 3 or fewer indicators are lit or the connection is being interrupted, change the position or angle of your Wireless router (Access point) and see if the connection state improves. If there is no improvement, connect to a wired network and perform the Network Easy Setting ( 22) again. The contents of the USB device cannot be read. USB devices connected using USB extension cable other than the supplied with the Wireless LAN Adaptor DY-WL10 (optional) or a USB hub may not be recognised by this unit.
SCBTT755_350EBGN_VQT2W23.book 48

Messages

The following messages or service numbers appear on the television or units display when something unusual is detected during startup and use.
HDMI ONLY Some BD-Video discs can only be output with HDMI. NET Displays while VIERA CAST is starting up. No PLAY There is a viewing restriction on a BD-Video or DVD-Video. ( 39) No READ The media is dirty or badly scratched. The unit cannot play. PLEASE WAIT The unit is carrying out internal process. This is not a malfunction. You cannot operate the unit while PLEASE WAIT is displayed. REMOVE The USB device is drawing too much power. Remove the USB device. SET ( stands for a number.) The remote control and main unit are using different codes. Change the code on the remote control. ( 24) H or F ( stands for a number.) Check and correct the speaker cable connections. There is something unusual. Check the unit using the troubleshooting guide. If the service number does not disappear, do the following. 1 Disconnect the plug from the household mains socket, wait a few seconds, then reconnect it. 2 Press [/I] to turn the unit on. If the service number does not disappear despite doing the above, request service from the dealer. Inform the dealer of the service number when requesting service. UPD / ( stands for a number.) The firmware is being updated. Please do not turn off the unit. [BTT755[for[Australia[and[New[Zealand] [W] is flashing. There is no link between this unit and the wireless system. Check that the wireless system is plugged into the household mains socket and is turned on. Ensure that the digital transmitter is fully inserted into the slot of this unit. If the wireless system is not used, disconnect the digital transmitter from this unit. IPOD OVER CURRENT ERROR The iPod/iPhone is drawing too much power. Remove the iPod/iPhone, and turn the unit off and on again. START The system is being restarted during the firmware update. Please do not turn the unit off. FINISH The firmware update is completed. NOT CONDITIONAL The requested operation cannot be conducted.

(Continued on next page)

SCBTT755_350EBGN_VQT2W23.book 50
Structures of still picture (JPEG) folders Root
P0000001.jpg P0000002.jpg

Supplemental information

Display languages list
ENG FRA DEU ITA ESP NLD SVE NOR DAN POR RUS

Folder A

P0000003.jpg P0000004.jpg P0000005.jpg
in DVD-R*4/DVD-R DL*4/ CD-R*5/CD-RW*5 Files inside a folder are displayed in the order they were updated or taken.

Language

English French German Italian Spanish Dutch Swedish Norwegian Danish Portuguese Russian
JPN CHI KOR MAL VIE THA POL CES SLK HUN FIN
Japanese Chinese Korean Malay Vietnamese Thai Polish Czech Slovak Hungarian Finnish
ARA HIN PER IND MRI BUL RUM GRE TUR
Arabic Hindi Persian Indonesian Maori Bulgarian Romanian Greek Turkish Others

Folder B Folder C

P0000006.jpg P0000007.jpg P0000008.jpg P0000009.jpg
P0000010.jpg P0000011.jpg P0000012.jpg
P0000001.jpg P0000002.jpg JPEG
in BD-RE*6/DVD-RAM*4 Folder structure is not displayed.

Video attribute

MPEG-2/MPEG-4 AVC/VC-1

XXXXX*2 XXXX.jpg *3

Meaning

Video recording method

XXXXX *2 XXXX.jpg*3

Audio attribute

LPCM/ Digital/ Digital+/ Signal type
in SD card*4/USB device*4
Displays JPEG files in all folders. Folder structure is not XXXXX *2 displayed. XXXX.jpg *3
TrueHD/DTS/DTS-ES Mtrx/ DTS-ES Dscrt/DTS 96/DTS 96 ES Mtrx/ DTS-HD HI RES/DTS-HD MSTR/MPEG ch (channel) k (kHz) b (bit)
Number of channels Sampling frequency Number of bits
P0000003.jpg P0000004.jpg

Language code list

Language Code Language Code

8065 8185

Structure of MP3 folders Root

001XXXX.mp3 002XXXX.mp3

003XXXX.mp3 004XXXX.mp3 005XXXX.mp3
in DVD-R/DVD-R DL/CD-R/ CD-RW/USB device Prefix the file names with 3-digit numbers in the order you want to play them.

Folder B

006XXXX.mp3 007XXXX.mp3 008XXXX.mp3 009XXXX.mp3

Folder C

010XXXX.mp3 011XXXX.mp3 012XXXX.mp3
Structure of DivX folders Root
P0000001.divx P0000002.divx
P0000003.divx P0000004.divx P0000005.divx
in BD-R*7/DVD-R*7/DVD-R DL*7/CD-R*7/CD-RW*7/USB device*7 Files inside a folder are displayed in the order they were updated or taken.
P0000006.divx P0000007.divx P0000008.divx P0000009.divx
P0000010.divx P0000011.divx P0000012.divx

*4 *5 *6 *7

The total combined maximum number of recognizable picture contents and folders: 3000 picture contents and 300 folders. The total combined maximum number of recognizable picture contents and folders: 999 picture contents and 99 folders. The total combined maximum number of recognizable picture contents and folders: 9999 picture contents and 300 folders. The total combined maximum number of recognizable file contents and folders: 200 file contents and 300 folders.

Abkhazian 6566 Afar: 6565 Afrikaans: 6570 Albanian: 8381 Amharic: 6577 Arabic: 6582 Armenian: 7289 Assamese: 6583 Aymara: 6589 Azerbaijani: 6590 Bashkir: 6665 Basque: 6985 Bengali; Bangla: 6678 Bhutani: 6890 Bihari: 6672 Breton: 6682 Bulgarian: 6671 Burmese: 7789 Byelorussian: 6669 Cambodian: 7577 Catalan: 6765 Chinese: 9072 Corsican: 6779 Croatian: 7282 Czech: 6783 Danish: 6865 Dutch: 7876 English: 6978 Esperanto: 6979 Estonian: 6984 Faroese: 7079 Fiji: 7074 Finnish: 7073 French: 7082 Frisian: 7089 Galician: 7176 Georgian: 7565 German: 6869 Greek: 6976 Greenlandic: 7576 Guarani: 7178
Gujarati: Hausa: Hebrew: Hindi: Hungarian: Icelandic: Indonesian: Interlingua: Irish: Italian: Japanese: Javanese: Kannada: Kashmiri: Kazakh: Kirghiz: Korean: Kurdish: Laotian: Latin: Latvian, Lettish: Lingala: Lithuanian: Macedonian: Malagasy: Malay: Malayalam: Maltese: Maori: Marathi: Moldavian: Mongolian: Nauru: Nepali: Norwegian: Oriya: Pashto, Pushto: Persian: Polish: Portuguese: Punjabi: Quechua:
Rhaeto-Romance: 8277 Romanian: 8279 Russian: 8285 Samoan: 8377 Sanskrit: 8365 Scots Gaelic: 7168 Serbian: 8382 Serbo-Croatian: 8372 Shona: 8378 Sindhi: 8368 Singhalese: 8373 Slovak: 8375 Slovenian: 8376 Somali: 8379 Spanish: 6983 Sundanese: 8385 Swahili: 8387 Swedish: 8386 Tagalog: 8476 Tajik: 8471 Tamil: 8465 Tatar: 8484 Telugu: 8469 Thai: 8472 Tibetan: 6679 Tigrinya: 8473 Tonga: 8479 Turkish: 8482 Turkmen: 8475 Twi: 8487 Ukrainian: 8575 Urdu: 8582 Uzbek: 8590 Vietnamese: 8673 Volapk: 8679 Welsh: 6789 Wolof: 8779 Xhosa: 8872 Yiddish: 7473 Yoruba: 8979 Zulu: 9085
SCBTT755_350EBGN_VQT2W23.book 51
Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries. Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent #s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD Master Audio | Essential and the DTS logos are trademarks of DTS, Inc. Product includes software. DTS, Inc. All Rights Reserved. This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. This product is licensed under the AVC patent portfolio license and VC-1 patent portfolio license for the personal and non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard and VC-1 Standard (AVC/VC-1 Video) and/or (ii) decode AVC/VC-1 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide AVC/VC-1 Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC. See http://www.mpegla.com. HDAVI ControlTM is a trademark of Panasonic Corporation. x.v.ColourTM is a trademark. VIERA CAST is a trademark of Panasonic Corporation. AVCHD and the AVCHD logo are trademarks of Panasonic Corporation and Sony Corporation. SDXC Logo is a trademark of SD-3C, LLC. DVD Logo is a trademark of DVD Format/Logo Licensing Corporation. Blu-ray DiscTM, Blu-rayTM, Blu-ray 3DTM, BD-LiveTM, BONUSVIEWTM, and the logos are trademarks of Blu-ray Disc Association. DivX, DivX Certified, DivX PlusTM HD and associated logos are registered trademarks of DivX, Inc. and are used under license. YouTube and Picasa are trademarks of Google, Inc. Made for iPod and Made for iPhone mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. iPhone, iPod, iPod classic, iPod nano and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification marks of the Digital Living Network Alliance. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

SCBTT755_350EBGN_VQT2W23.book 53

Specifications

GENERAL
Power consumption: Power consumption in standby mode Power supply: iPod/iPhone Connector: WIRELESS LAN Connector: (USB 2.0 standard) Dimensions (WkHkD): Mass: 100 W Approx. 0.2 W AC 220 V to 240 V, 50 Hz DC OUT 5 V 500 mA MAX DC OUT 5 V 500 mA 430 mmk62 mmk287 mm Approx. 3.5 kg (Dimensions and Weight do not include speakers) 0 oC to 40 oC 35 % to 80 % RH (no condensation)

FM TUNER SECTION

Preset memory: 30 stations Frequency range: 87.50 MHz to 108.00 MHz (50 kHz step) Antenna terminals: 75 (unbalanced)

SPEAKER SECTION

FRONT SPEAKERS [BTT755] SB-HF730 Type: Woofer: Tweeter: Impedance: Output sound pressure: Frequency range: Dimensions (WkHkD): Mass: [BTT350] SB-HF230 Type: Full range: Impedance: Output sound pressure: Frequency range: Dimensions (WkHkD): Mass: CENTRE SPEAKER [BTT755] SB-HC730 Type: Woofer: Tweeter: Impedance: Output sound pressure: Frequency range: Dimensions (WkHkD): Mass: [BTT350] SB-HC480 Type: Full range: Impedance: Output sound pressure: Frequency range: Dimensions (WkHkD): Mass: 2 WAY 3 SPEAKER Bass-ref. 3.5 cm k 10 cm CONE TYPEk 2 2.5 cm SEMI-DOME TYPE dB/W (1 m) 100 Hz to 30 kHz (j16 dB), 130 Hz to 25 kHz (j10 dB) 255 mmk1024 mmk255 mm Approx. 2.3 kg 1 WAY 1 SPEAKER Bass-ref. 6.5 cm CONE TYPE dB/W (1 m) 105 Hz to 25 kHz (j16 dB), 130 Hz to 22 kHz (j10 dB) 80 mmk118.5 mmk68 mm Approx. 0.4 kg
Operating temperature range: Operating humidity range:

AMPLIFIER SECTION

RMS TTL POWER OUTPUT: 1000 W 1 kHz, 10 % total harmonic distortion FRONT: 125 W per ch (3 ) CENTRE: 250 W per ch (6 ) SURROUND: 125 W per ch (3 ) 100 Hz, 10 % total harmonic distortion SUBWOOFER: 250 W per ch (6 ) DIN TTL POWER OUTPUT: 590 W 1 kHz, 1.0 % total harmonic distortion FRONT: 90 W per ch (3 ) CENTRE: 115 W per ch (6 ) SURROUND: 90 W per ch (3 ) 45 Hz to 120 Hz, 1.0 % total harmonic distortion SUBWOOFER: 115 W per ch (6 )
2 WAY 3 SPEAKER Bass-ref. 3.5 cm k 10 cm CONE TYPEk 2 2.5 cm SEMI-DOME TYPE dB/W (1 m) 100 Hz to 30 kHz (j16 dB), 130 Hz to 25 kHz (j10 dB) 424 mmk59 mmk76 mm Approx. 1.06 kg 1 WAY 1 SPEAKER Bass-ref. 6.5 cm CONE TYPE dB/W (1 m) 90 Hz to 25 kHz (j16 dB), 115 Hz to 22 kHz (j10 dB) 145 mmk85 mmk71.5 mm Approx. 0.6 kg

Promotion

Exclusive to Panasonic

WITH ANY PANASONIC VIERA 3D PLASMA TV*
postage and fulfillment to be paid when submitting the claim

$98.00

SC-BTT755 M. Violence
Gift pack valued at up to $1,348RRP
Offer ends 11:59pm AEDST 31st December 2010.
How to claim your BONUS 3D AVATAR HOME THEATRE PACK
1. Purchase any Panasonic VIErA 3D PLASMA TV between 01/11/10 and 11.59pm AEDST 31/12/10. BONUS 3D AVATAR HOME THEATRE PACK includes 3D BLU-RAY HOME THEATRE, 3D AVATAR ON BLU-RAY & BONUS PAIR OF 3D EYEWEAR. BONUS 3D AVATAR HOME THEATRE PACK available with TH-P50VT20A, TH-P54VT20A, TH-P58VT20A, TH-P65VT20A. 2. Visit www.panasonic.com.au/bonus 3. omplete the online claim form, including your credit card payment by Visa or MasterCard for postage and fulfillment. C 4. rint out the online claim form, attach your original purchase receipt and mail in to the address below. P Panasonic VIErA 3D Plasma Promotion PO Box 495 Brookvale NSW 2100 5. Claims will be fulfilled within 8 weeks from the time the claim is validated. Final claims close last mail on 21/01/11. *See over for full terms and conditions.
2009 Twentieth Century Fox Film Corporation and Dune Entertainment LLC. All Rights Reserved. 2010 Twentieth Century Fox Home Entertainment LLC. All Rights Reserved. TWENTIETH CENTURY FOX, FOX and associated logos are trademarks of Twentieth Century Fox Film Corporation and its related entities.
Panasonic VIErA 3D PLASMA Promotion - Terms and Conditions
1. Instructions on how to claim the gift form part of these Terms and Conditions. Participation in this Panasonic VIErA 3D PLASMA promotion (Promotion) is deemed acceptance of these Terms and Conditions. This Promotion is not valid in conjunction with any other offer or promotion involving Panasonic products. 2. The Promotion begins on 01/11/2010 and ends at 11.59pm AEDST on 31/12/2010 (Promotion Period). 3. Promoter shall use all reasonable efforts to ensure that all approved claims will be fulfilled by registered post within eight (8) weeks from the time the redemption is validated. The Promoter accepts no The responsibility should the delivery take longer than eight (8) weeks for reasons beyond its reasonable control. 4. This Promotion is open to all Australian residents aged 18 years and above. Employees and directors of the Promoter, the Promoters related companies or any agencies involved in this Promotion, and the immediate families of each of those persons are eligible to participate in this Promotion provided that they purchase a new Participating Product (as defined below). 5. Claimants must purchase and pay in full for any Panasonic VIErA Full High Definition (Full-HD) 3D NEO PLASMA TV model, as specified below, from an authorised Panasonic participating retailer during the Promotion Period to be eligible to receive a Panasonic Blu-ray Home Theatre System (SC-BTT755), Bonus High Precision Full-HD 3D Eyewear (TY-EW3D2MW) and 3D AVATAR Blu-ray disc. Participating models: TH-P50VT20A, TH-P54VT20A, TH-P58VT20A, TH-P65VT20A (Participating Product). Stock in each participating retailer is subject to availability and it is the responsibility of the purchaser to check stock availability with the authorised Panasonic participating retailer. 6. Claimants who purchase a Participating Product during the Promotion Period are entitled to submit a claim for the gift in accordance with Item 5. Claimants must follow the claim process below in order to obtain their gift where the authorised participating Panasonic retailer does not place the Claimants purchase on back order for the Participating 7. Product and delivers the Participating Product at the time of purchase: a) Pay $98.00 for postage and fulfillment by credit card (Visa and MasterCard accepted only) when submitting the claim in accordance with Item 7(b). b) claim, individuals must register their purchase online by visiting www.panasonic.com.au/bonus following the prompts to the competition claim form, inputting the requested details including their To full name, postal address, valid email address, serial number and model number from their product purchased, store of purchase, date of purchase, credit card details for the payment for postage and fulfillment and submitting the fully completed online form. Payment for postage and fulfillment can only be made via credit card (Visa and MasterCard accepted only) and payment will be processed at the time the claim is submitted online.

Claimants will then receive an email from the Promoter confirming that their claim form has been submitted and will include a unique claim number (UCN) for future tracking of the claim (Confirmation Email). Claimants must then print off their online claim form, make record of their unique claim number, and mail both the online claim form and their original purchase receipt to Panasonic VIErA 3D Plasma Promotion, PO Box 495, Brookvale NSW 2100. All mail must be posted within 21 calendar days of the purchase date found on the purchase receipt in order to claim a gift. Final claims close last mail on 21/01/2011. 8. Claimants must follow the claim process below where the Participating Product is placed on back order by the authorised Panasonic participating retailer. a) Pay $98.00 for postage and fulfillment by credit card (Visa and MasterCard accepted only) when submitting the claim in accordance with Item 8(c). b) a Participating Product is on back order claimants must complete the process outlined in item 8(c) within 21 calendar days of purchase. Back ordered products means, the situation where the order has If been placed and paid for in full between 01/11/2010 and 31/12/2010, but the Participating Product has not been delivered by the manufacturer to the retailer. c) Back order claim: claimants must visit www.panasonic.com.au/bonus within 21 calendar days of the purchase of their Participating Product to register the purchase and input the requested details excluding the serial number (Claimants must select YES to confirm the Participating Product is on back order) and include credit card details for the payment for postage and fulfillment. Payment for postage and fulfillment can only be made via credit card (Visa and MasterCard accepted only) and payment will be processed at the time the claim is submitted online. Claimants will receive an email from the Promoter confirming that their back order claim form has been submitted and will include a unique claim number for future tracking of the claim (Confirmation Email). d) Back order claim must be finalised within 88 calendar days following the date the Participating Product on back order is received by the customer, and not later than 19/04/2011. To complete the claim, the claimant must return to www.panasonic.com.au/bonus and follow the prompts to the relevant section of the site to finalise backorder claims. The claimant must enter their username and password (issued at the time of submitting the claim) to upload their saved back order claim form and input the serial number of the Participating Product into the online claim form.
Claimants must then print off their completed online claim form, make record of their unique claim number, and mail both the online claim form and their original purchase receipt to Panasonic VIErA 3D Plasma Promotion, PO Box 495, Brookvale NSW 2100. Final back order claims close last mail 19/04/2011. 9. Commercial or business transactions involving the purchase of the Participating Products, lay-bys not paid in full by 31/12/2010 and short term rental transaction contracts of less than 24 months are excluded from this offer (Excluded Transactions). Educational institutions, hospitals, fundraisers and government departments or organisations of a similar kind are classed as business transactions and therefore not eligible. The Promoter at its sole discretion shall have the right to refuse any claim for any Excluded Transaction. 10. urchases of the Participating Product via eBay or similar online third party Internet websites are also excluded from this offer (Excluded Purchase). The Promoter at its sole discretion shall have the right P to refuse any claim for any Excluded Purchase. 11. ll successful claimants who have purchased a Panasonic VIErA Full-HD 3D NEO PLASMA TV model number: TH-P50VT20A, TH-P54VT20A, TH-P58VT20A or TH-P65VT20A will receive the gift of a Panasonic A Blu-ray Home Theatre System (SC-BTT755) valued at RRP$1,099, Bonus High Precision Full-HD 3D Eyewear (TY-EW3D2MW) valued at RRP$199 and 3D AVATAR Blu-ray disc. All valid claimants will be notified by email that their claim has been verified. 12.The value of the gift is a guide only and is correct at the time of printing. The Promoter accepts no responsibility for any discrepancy in gift value. 13.The gift is not transferable or exchangeable and cannot be taken as or redeemed for cash. 14.The Promoters decision is final on all matters in this Promotion and no correspondence will be entered into. 15.Any cost associated with accessing the promotional website is the claimants responsibility and is dependent on the Internet service provider used. 16. ll redemption claims must be posted within 21 calendar days of the date of the purchase receipt from the participating retailer or within 88 calendar days from the date of product being received in the case A of back ordered product. Dated post stamps will be checked. Claim forms must be received by last mail Friday 21/01/2011 otherwise they will be deemed to be invalid, unless the Participating Product is on back order. Invalid claims will not be eligible to receive a gift. The Promoter accepts no responsibility for claims not processed or late or declined claims due to incorrect payment details. The Promoter is not responsible for deliveries of Participating Products that are late, lost or stolen. 17. ultiple gift redemptions are permitted, but are limited to three (3) per household, provided that each is associated with an individual purchase of a Participating Product through a participating retail outlet M within Australia and each gift redemption entry is submitted separately for each purchase and includes a separate payment of postage and fulfillment for each claim, in accordance with these Terms and Conditions. 18. romoter recommends claimants retain a copy of their purchase receipt(s) for all claims as proof of purchase. Failure to produce the proof of purchase for all claims when requested may, in the absolute P discretion of the Promoter, result in invalidation of ALL of a claimants claims and forfeiture of any right to a gift. 19. he Promoter reserves the right, at any time, to verify the validity of the gift redemption and the claimants details (including the claimants identity and place of residence) and to disqualify any claimant who T submits a gift redemption that is not in accordance with these Terms and Conditions or who tampers with the gift redemption process. The Promoter reserves the right to contact the participating stores and the customer to determine when the Participating Products are delivered by the participating retail outlet in Australia and when back order claims are submitted in accordance with Item 8(c). Errors and omissions will be accepted at the Promoters discretion. Failure by the Promoter to enforce any of its rights at any stage does not constitute a waiver of those rights. 20. If there is a dispute as to the identity of a claimant, the Promoter reserves the right, in its sole discretion, to determine the identity of the claimant. 21. ny incomplete, indecipherable, or illegible submission of a redemption claim will be deemed invalid. The Promoter is not responsible for any problems or technical malfunction of any equipment, software A or any injury or damage to a claimants or other persons computer relating to or resulting from participation in or downloading of materials in relation to this Promotion. 22. If the gift is unavailable, the Promoter, in its discretion, reserves the right to substitute the gift with another gift of equal value. 23.f this Promotion is interfered with in any way or is not capable of being conducted as reasonably anticipated due to any reason beyond the reasonable control of the Promoter, the Promoter reserves the I right, in its sole discretion, to the fullest extent permitted by law, to disqualify any claimant; or to modify, suspend, terminate or cancel this Promotion, as appropriate, subject to any written directions from a regulatory authority. 24. xcept for any liability that cannot be excluded by law, the Promoter (including its officers, employees, agents and contractors) excludes all liability (including negligence), for any personal injury, or any loss E or damage (including loss of opportunity), whether direct, indirect, special or consequential, arising in any way out of this Promotion, including, but not limited to, where arising out of the following: (a) any technical difficulties or equipment malfunction (whether or not under the Promoters control); (b) any theft, unauthorised access or third party interference; (c) any entry that is late, lost, altered, damaged or misdirected (whether or not after their receipt by the Promoter) due to any reason beyond the reasonable control of the Promoter; (d) any variation in gift value to that stated in these Terms and Conditions; (e) any tax liability incurred by a claimant; or (f) use of the gift. 25. he Promoter shall not be responsible for any delays in supply of the gift to the claimant as a result of the failure by the supplier of the gift to supply the number of units within the time specified to the T Promoter. The Promoter shall additionally not be responsible for any delays caused as a result of inbound transportation, disruptions (including but not limited to strikes, weather, postage delays, etc) which are caused by events, which are beyond the control of the Promoter and/or the supplier of the gift. 26. he Promoter collects personal information in order to conduct the Promotion and may, for this purpose, disclose such information to third parties, including, but not limited to, prize suppliers and as required, T to Australian regulatory authorities. Entry is conditional on providing this information. The Promoter may, for an indefinite period unless otherwise advised, use the information for promotional, marketing and publicity purposes including sending electronic messages or telephoning the entrant. Entrants should direct any request to access, update or correct information to the Promoters Privacy Officer. All entries become the property of the Promoter. The Promoters privacy policy can be accessed at www.panasonic.com.au. 27.The Promoter is Panasonic Australia Pty Limited (ABN 592 187) of Austlink Corporate Park, 1 Garigal Road, Belrose NSW 2085. All customer service queries should be directed to Telephone: 132 600. Blu-ray Disc and (LOGO) are trademarks of the Blu-ray Disc Association. 2009 Twentieth Century Fox Film Corporation and Dune Entertainment LLC. All Rights Reserved. 2010 Twentieth Century Fox Home Entertainment LLC. All Rights Reserved.TWENTIETH CENTURY FOX, FOX and associated logos are trademarks of Twentieth Century Fox Film Corporation and its related entities.