RQTX1168-G_eng.book Page 1 Friday, April 23, 2010 4:28 PM
The illustration shows SC-PT70. Obrzek pedstavuje model SC-PT70. Na rysunku przedstawiono model SC-PT70.

Operating Instructions

DVD Home Theater Sound System

Model No.

SC-PT22

Dear customer

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference. The illustrations shown may differ from your unit. Region number The player plays DVD-Video marked with labels containing the region number or ALL. Region The Middle East and South Africa Southeast Asia India and Nigeria Example: For India and Nigeria Number 5

[GW] [GC] [GS] [GA] [GJ]

RQTX1168-G

until 2010/07/06

RQTX1168-G_eng.book Page 2 Friday, April 23, 2010 4:28 PM

Getting Started

System Main unit Speaker system Subwoofer Front speakers Center speaker Surround speakers
SC-PT22 SA-PT22 SB-HF22 SB-HC22 SB-HS22 SB-HW22

Accessories

Please check and identify the supplied accessories.

Playing Discs

These operating instructions are applicable to model SC-PT22 for a variety of regions. Unless otherwise indicated, illustrations in these operating instructions are of the model for India and Nigeria. Operations in these instructions are described mainly with the remote control, but you can perform the operations on the main unit if the controls are the same.
1 Remote control (N2QAYB000456) 2 Remote control batteries 1 FM indoor antenna 1 Video cable Speaker cables 3 short cables 2 long cables 1 AC mains lead

CAUTION!

Other Operations
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
This product may receive radio interference caused by mobile telephones during use. If such interference is apparent, please increase separation between the product and the mobile telephone.

For Southeast Asia

CAUTION:
The AC voltage is different according to the area. Be sure to set the proper voltage in your area before use. (For details, please refer to page 7.)

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. USE ONLY THE RECOMMENDED ACCESSORIES. DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
THIS UNIT IS INTENDED FOR USE IN TROPICAL CLIMATES.

Reference

DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS. DO NOT OBSTRUCT THE UNITS VENTILATION OPENINGS WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS. DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED CANDLES, ON THE UNIT. DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY FRIENDLY MANNER. The socket outlet shall be installed near the equipment and easily accessible. The mains plug of the power supply cord shall remain readily operable. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from AC receptacle.

RQTX1168

(Inside of product)
-If you see this symbolInformation on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.

RQTX1168-G_eng.book Page 3 Friday, April 23, 2010 4:28 PM

TABLE OF CONTENTS

Accessories.2 Control reference guide.4
Playing Discs Getting Started
Basic play. 11 Other modes of play. 11
Repeat play. 11 Program and Random play. 11

Quick Start Guide

step 1 Positioning. 6 step 2 Connections. 6
Speaker connections.6 Radio antenna connections.7 Audio and video connections.7
Using navigation menus. 12
Playing data discs. 12 Playing DVD-R/-RW (DVD-VR) discs. 12
Using on-screen menus. 12

Other Operation

Playing from an USB device. 14
step 3 AC mains lead connection. 7 step 4 Preparing the remote control. 8 step 5 EASY SETUP. 8 Listening to the radio.9
Presetting stations automatically. 9 Listening/confirming the preset channels. 9 Manual tuning. 9
Changing the player settings. 14 DivX information. 16 Speaker installation option. 16 Licenses. 16 Discs that can be played. 17 Specifications. 18 Troubleshooting guide. 19 Maintenance. 20 Safety precautions. 21 Caution for AC Mains Lead. 21
Selecting the playback source.9
Selecting the source from the START menu. 9 Selecting the source by the remote control. 9 Auto AUX link. 9
Enjoying sound effects from all speakers
Enjoying surround sound effects.10 Selecting sound mode.10 Whisper-mode Surround.10 Adjusting the speaker output level manually.10 Adjusting the balance of the front speakers.10
RQTX1168-G_eng.book Page 4 Friday, April 23, 2010 4:28 PM

Control reference guide

PLAY MODE AV

REPEAT

SEARCH

EXT-IN

SLOW SKIP

PAUSE STOP

SURROUND

TOP M GATOR EN

DIRECT N AVI

PLAY LIST

RETURN

FL DISPLAY CANCEL

-CH SELECT

-SLEEP

OPEN/CLOSE
RQTX1168-G_eng.book Page 5 Friday, April 23, 2010 4:28 PM

Remote control

1 Turn the main unit on/off ( 8) 2 Select the play mode ( 11) 3 Select channels and title numbers etc. / Enter numbers ( 9, 11) 4 Set the repeat mode ( 11) 5 Basic operations for play ( 11) 6 Select preset radio stations ( 9) 7 Select surround sound effects ( 10) 8 Show a disc top menu or program list ( 11, 12) 9 Select or confirm menu items / Frame-by-frame ( 11) : Show a disc menu or play list ( 11, 12) ; Show setup menu or select speaker channel ( 8, 10) < Turn Whisper-mode Surround on/off ( 10) = TV operations Aim the remote control at the Panasonic TV and press the button. []: Turn the TV on/off [AV]: Change the TVs video input mode [r, VOL, s]: Adjust the TV volume This may not work properly with some models. > Adjust the volume of the main unit ? Mute the sound MUTE flashes on the main units display while the function is on. To cancel, press the button again or adjust the volume. Muting is cancelled when you switch the unit to standby. @ Source select [DVD]: Select disc as the source ( 8) [RADIO]: Select FM tuner ( 9) [EXT-IN]: Select external audio as the source ( 9) USB ,# AUX/TV A Select radio stations manually ( 9) B Select sound mode ( 10) C Show START menu ( 9) D Show on-screen menu ( 12) E Return to previous screen ( 11)

4 Press [3, 4] to select OTHERS and press [OK]. 5 Press [3, 4] to select EASY SETUP and press [OK]. 6 Press [OK] to select SET. 7 Press [3, 4] to select Yes and press [OK]. messages and 8 Follow the1] and [OK]. make the settings with [3, 4, 2,
( below, EASY SETUP settings)
Press [OK] to finish EASY SETUP.
Distance: Within approx. 7 m Angle: Within approx. 20 up and down, approx. 30 to the left and right

EASY SETUP settings

Language
Select the language used on menu screen.

TV aspect

Select the aspect to suit your TV.
Speakers position Speaker check
Select 5.1ch layout mode or 2.1ch layout mode according to your speaker layout ( 6, Positioning). Listen to speaker output to confirm speaker connections.

Speaker output

Make surround sound setting for speaker output. Only when 5.1ch layout mode is selected in Speakers position above. [Note] Settings in the EASY SETUP can also be changed in the player settings (e.g. language and TV aspect ( 14)).
RQTX1168-G_eng.book Page 9 Friday, April 23, 2010 4:28 PM

Listening to the radio

Presetting stations automatically
Up to 30 stations can be set.
Selecting the playback source
Selecting the source from the START menu
Press [MENU]. the button: Each time you press
Press [RADIO] to select FM.
the 1 Press [START] to show on. START menu. This unit automatically turns

DVD/CD Home Cinema

LOWEST (factory preset): To begin auto preset with the lowest frequency. CURRENT: To begin auto preset with the current frequency. To change the frequency, refer to Manual tuning (

Input Selection

below).
The tuner starts to preset all the stations it can receive into the channels in ascending order. SET OK is displayed when the stations are set, and the radio tunes to the last preset station. ERROR is displayed when automatic presetting is unsuccessful. Preset the stations manually ( below).
When Input Selection is selected You can select a desired source from the menu. DVD/CD ( 8), FM ( left), AUX/TV ( below), USB ( 14) When a disc is loaded or an USB device is connected, you can also access playback or menus from the START menu. e.g. [DVD-V]
DVD/CD Playback Disc TOP MENU (DVD) MENU (DVD) Input Selection Home Cinema
Listening/confirming the preset channels

Playback/menu access

1 Press [RADIO] to select FM. 2 Press theanumbered buttons to select a channel. To select 2-digit number
e.g. 12: [S10] [1] [2] Alternatively, press [X, W]. The FM setting is also shown on the TV display. If noise is excessive Press and hold [PLAY MODE] to display MONO. To cancel the mode, press and hold the button again until AUTO ST is displayed. The mode is also cancelled when you change the frequency.
When the on-screen control panel appears e.g. [DVD-V] (when Playback Disc is selected from the START menu)

Enjoying surround sound effects

Press [SURROUND].

Each time you press the button: For 5.1ch layout mode STANDARD: Sound is output as it was recorded/encoded. Speaker output varies depending on the source. MULTI-CH: You can enjoy sound from the front speakers, as well as the surround speakers even when playing a 2-channel sound or non-surround sound. MANUAL: ( below)

Whisper-mode Surround

Except [DivX] You can enhance the surround effect for low volume 5.1-channel sound. (Convenient for late night viewing.)

Press [W.SRD].

Each time you press the button: WHISPER-MODE SRD ON,--.WHISPER-MODE SRD OFF
While MANUAL is displayed, press [2, 1] to select other surround modes.
Each time you press [2, 1]: DOLBY PLII MOVIE Suitable for movie software, or softwares recorded in Dolby Surround. (except [DivX]) DOLBY PLII MUSIC Adds 5.1-channel effects to stereo sources. (except [DivX]) S.SRD You can enjoy sound from all speakers with stereo sources. (Surround output will be in mono.) STEREO Sound will only be output to the front speakers and the subwoofer from any source.
Adjusting the speaker output level manually
(Only when 5.1ch layout mode is selected in Speakers position ( EASY SETUP settings).) 8,
Preparation To display the picture, turn on the TV and select the appropriate video input mode. Press [r, VOL, s] to adjust the volume to normal listening level. Select TEST TONE from SPEAKER SETTINGS in AUDIO menu ( 15).
1 Press [OK] to enter test tone mode.
AUDIO-SPEAKER SETTINGS-TEST TONE SPEAKER LEFT CENTER RIGHT SURROUND RIGHT SURROUND LEFT TRIM LEVEL 0dB 0dB 0dB
Recommended modes to enjoy TV audio or stereo sources from all speakers:
DOLBY PLII MOVIE DOLBY PLII MUSIC S.SRD
SRD lights in the main units display when there is output from the surround speakers. For 2.1ch layout mode STANDARD: Sound is output as it was recorded/encoded. Speaker output varies depending on the source. STEREO: You can play any source in stereo. Surround sound effect is unavailable. A.SRD: You can enjoy surround effect with any audio source.
[OK] then [3, 4] 2 Pressspeaker. (CENTER,to adjust the speaker level for each SURROUND RIGHT, SURROUND LEFT)
`6 dB to i6 dB (Factory preset: 0 dB) To exit the screen, press [SETUP]. To adjust speaker level during play
Test tone will be output to each channel in the following order. LEFT, CENTER, RIGHT, SURROUND RIGHT, SURROUND LEFT
(Effective only when 5.1ch layout mode is selected in Speakers position ( 8, EASY SETUP settings) and playing 5.1-channel sound.) 1 Press and hold [CH SELECT] to select the speaker. While the speaker channel is displayed, press [CH SELECT]. L # C # R # RS # LS # SW ^-------------------------------------------------} You can adjust SW (Subwoofer) only if the disc includes a subwoofer channel. S appears on the main units display when you have selected S.SRD ( left, Enjoying surround sound effects). In this case, you can adjust both surround speaker levels at the same time using [3, 4]. S: `6 dB to i6 dB 2 Press [3] (increase) or [4] (decrease) to adjust the speaker level for each speaker. C, RS, LS, SW: `6 dB to i6 dB (L, R: Only the balance is adjustable.) ( below)

1 While picture is displayed, press [TOP MENU] to show the thumbnail menu.

Item name

Press [3, 4, 2, 1] to select the item and press [OK].
e.g. Menu 1 (Disc/Play) [DVD-V] Current setting
T 1 C1 1:ENG 3/2.1ch OFF 1 :ENG CHAPTER SEARCH

Group name

JPEG images G

Group and content number

1/ 1:C 3/ 9
2 Press [SKIP :, SKIP 9] to skip page by page.
To go to other group 1 Press [3] to select the group name. 2 Press [2, 1] to select the group and press [OK].
Press [3, 4, 2, 1] to select a picture and press [OK].
3 Press [3, 4] to make the settings and press [OK]. 4 Press [RETURN] to exit.
Items shown differ depending on the type of disc.

Menu 1 (Disc/Play)

TRACK SEARCH, TITLE SEARCH, CONTENT SEARCH, CHAPTER SEARCH, PG SEARCH (Program Search), PL SEARCH (Playlist Search)
To start from a specific item [VCD] This does not work when using playback control. e.g. [DVD-V]: T2 C5 To select numbers for data disc e.g. 123: [S10] [1] [2] [3] [OK]
RQTX1168-G_eng.book Page 13 Friday, April 23, 2010 4:28 PM
[DVD-V] [DivX] (with multiple soundtracks) To select audio soundtrack [DVD-VR] [VCD] To select L, R, L+R or L R Actual operations depend on the disc. Read the discs instructions for details. Signal type/data LPCM/PPCM/ D/DTS/MP3/MPEG: Signal type kHz (Sampling frequency)/bit/ch (Number of channels) e.g.

Menu 2 (Video)

PICTURE MODE
To select zoom sizes NORMAL, AUTO ([DVD-VR] [DVD-V] [VCD]), k2, k4 [JPEG]: during pause
.1: Center.2: Front leftiFront right.3: Front leftiFront rightiCenter [DivX] It may take some time for play to start if you change the audio on a DivX video disc.
When playing PAL discs AUTO: VIDEO: FILM: Automatically detects the film and video content, and appropriately converts it. Select when using AUTO, and the content is distorted. Select this if the edges of the film content appear jagged or rough when AUTO is selected. However, if the video content is distorted as shown in the illustration to the right, then select AUTO.

PLAY SPEED

[DVD-VR] [DVD-V] To change play speed from k0.6 to k1.4 (in 0.1-unit steps) Press [1 PLAY] to return to normal play. After you change the speed Dolby Pro Logic II has no effect. Audio output switches to 2-channel stereo. Sampling frequency of 96 kHz is converted to 48 kHz. This function may not work depending on the discs recording.
When playing NTSC discs AUTO1: AUTO2: VIDEO: Automatically detects the film and video content, and appropriately converts it. In addition to AUTO1, automatically detects film contents with different frame rates and appropriately converts it. Select if the video content is distorted when using AUTO1 or AUTO2.

REPEAT MODE

( 11, Repeat play) A-B Repeat (To repeat a specified section) Except [JPEG] [MPEG4] [DivX] [DVD-VR] (Still picture part) [VCD] (SVCD) Press [OK] at the starting and ending points. Select OFF to cancel.

TIME DELAY

When connected with a Plasma display, adjust if you notice the audio is out of sync with the video. 20 ms 40 ms 60 ms 0 ms 80 ms 100 ms
3 Press [3, 4] to select the item and press [OK]. 4 Press [3, 4] to make the settings and press [OK]. 5 Press [SETUP] to exit.
The settings remain intact even if you switch the unit to standby. Underlined items are the factory settings in the following menus.

NTSC DISC OUT

Choose PAL 60 or NTSC output when playing NTSC discs ( systems). NTSC: When connected to an NTSC TV. PAL60: When connected to a PAL TV. For Southeast Asia : NTSC is the factory preset. 17, Video
RQTX1168-G_eng.book Page 15 Friday, April 23, 2010 4:28 PM

STILL MODE

Specify the type of picture shown when paused. AUTO FIELD: The picture is not blurred, but picture quality is lower. FRAME: Overall quality is high, but the picture may appear blurred.

DISPLAY menu

LANGUAGE
Choose the language for the on-screen messages.

ENGLISH ENGLISH PCCK

FRANAIS MAGYAR ESPAOL ESKY DEUTSCH POLSKI

VIDEO OUT (I/P)

(This works only when using the COMPONENT VIDEO OUT terminal.) Select PROGRESSIVE only if connecting to a progressive output compatible TV. INTERLACE PROGRESSIVE: A message screen will appear. Follow the on-screen instructions.

OTHERS menu

REGISTRATION [DivX] Display the units registration code. SHOW CODE You need this registration code to purchase and play DivX Video-onDemand (VOD) content ( 16). AUTO AUX LINK
ON: When this unit is in standby mode, this unit will turn on and change the source to AUX/TV when there is an audio signal to the AUX/TV terminal. ( 9)

AUDIO menu

DYNAMIC RANGE
ON: OFF Adjusts for clarity even when the volume is low. Convenient for late night viewing. (Only works with Dolby Digital)

SPEAKER SETTINGS

Select the delay time of the speakers. (Effective only when 5.1ch layout mode is selected in Speakers position ( 8, EASY SETUP settings) and playing 5.1-channel sound.) (Center and surround speakers only) For optimum listening with 5.1-channel sound, all the speakers, except for the subwoofer, should be the same distance from the seating position. If you have to place the center or surround speakers closer to the seating position, adjust the delay time to make up for the difference.

C L SW C R

JPEG TIME
Set the speed of the slideshow. Factory preset: 3 SEC 1 SEC to 15 SEC (in 1-unit steps) 15 SEC to 60 SEC (in 5-unit steps) 60 SEC to 180 SEC (in 30-unit steps)

FL DIMMER

Change the brightness of the units display. BRIGHT DIM: The display is dimmed. AUTO: The display is dimmed, but brightens when you perform some operations.
: Actual speaker position : Ideal speaker position : Primary listening distance
Approximate room dimensions

SET ( 8)

Circle of constant primary listening distance If either distance a or b is less than c, find the difference in the table and change to the recommended setting. a Center speaker Difference (Approx.) Setting 30 cm 1ms 60 cm 2ms 90 cm 3ms 120 cm 4ms 150 cm 5ms b Surround speaker Difference (Approx.) Setting 150 cm 5ms 300 cm 10ms 450 cm 15ms

DVD-VR/DATA

SCREEN DIMMER
This is to prevent burn marks on the TV screen. OFF WAIT 5 MIN: If there is no operation for 5 minutes, the picture turns grey. The TV screen will resume when you perform some operations. (This does not work during video playback.)
SETTINGS: C DELAY (Center Delay): 0ms, 1ms, 2ms, 3ms, 4ms, 5ms Select the delay time for your center speaker. LS/RS DELAY (Left Surround/Right Surround Delay): 0ms, 5ms, 10ms, 15ms Select the delay time for your surround speakers. TEST TONE: SETTING Use the test tone for speaker level adjustments ( 10, Adjusting the speaker output level manually).

DEFAULTS

This returns all values in the MAIN menu to the default settings. RESET The password screen is shown if RATINGS ( 14) is set. Please enter the same password, then turn the unit off and on again.
Select to play only DVD-VR or DATA format. DVD-VR: To play the video programs on DVD-R/-RW. DATA: To play the data files on DVD-R/-RW.
RQTX1168-G_eng.book Page 16 Friday, April 23, 2010 4:28 PM

DivX information

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified device must be registered in order to play DivX Video-on-Demand (VOD) content. First generate the DivX VOD registration code for your device and submit it during the registration process. [Important: DivX VOD content is protected by a DivX DRM (Digital Rights Management) system that restricts playback to registered DivX Certified devices. If you try to play DivX VOD content not authorized for your device, the message AUTHORIZATION ERROR will be displayed and your content will not play.] Learn more at www.divx.com/vod.

Regarding DivX content that can only be played a set number of times
Other Operations Reference
Some DivX VOD content can only be played a set number of times. When you play this content, the remaining number of plays is displayed. You cannot play this content when the number of remaining plays is zero. (RENTAL EXPIRED is displayed.) When playing this content The number of remaining plays is reduced by one if you press [] or [SETUP]. you press [ STOP]. you press [SKIP :, SKIP 9] or [SEARCH 6, SEARCH 5] etc. and arrive at another content. Resume function ( 11, Stop: [ STOP]) does not work.
Speaker installation option
Attaching to a wall You can attach all of the speakers (except subwoofer) to a wall. The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg per screw. Consult a qualified building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers. 1 Drive a screw (not supplied) into the wall. At least 30 mm

4.0 mm

Wall or pillar

7.0 mm to 9.4 mm

3 mm to 5 mm
2 Fit the speaker securely onto the screw(s) with the hole(s).

22.3 mm

RQTX1168-G_eng.book Page 17 Friday, April 23, 2010 4:28 PM

Discs that can be played

Commercial discs Type of media/ Logo DVD-Video Remarks High quality movie and music discs Indicated as [DVD-V]
Video systems This unit can play PAL and NTSC, but your TV must match the system used on the disc. PAL discs cannot be correctly viewed on an NTSC TV. This unit can convert NTSC signals to PAL 60 for viewing on a PAL TV ( 14, NTSC DISC OUT in VIDEO menu). Disc handling precautions Do not attach labels or stickers to discs. This may cause disc warping, rendering it unusable. Do not write on the label side with a ball-point pen or other writing instrument. Do not use record cleaning sprays, benzine, thinner, liquids which prevent static electricity, or any other solvent. Do not use scratch-proof protectors or covers. Do not use the following discs: Discs with exposed adhesive from removed stickers or labels (rented discs, etc.). Discs that are badly warped or cracked. Irregularly shaped discs, such as heart shapes. Tips for making data discs [MP3] (Extension:.MP3,.mp3) Disc: DVD-R/RW, CD-R/RW This unit does not support ID3 tags. Sampling frequency and compression rate: DVD-R/RW: 11.02 kHz, 12 kHz, 22.05 kHz, 24 kHz (8 kbps to 160 kbps), 44.1 kHz and 48 kHz (32 kbps to 320 kbps) CD-R/RW: 8 kHz, 11.02 kHz, 12 kHz, 16 kHz, 22.05 kHz, 24 kHz (8 kbps to 160 kbps), 32 kHz, 44.1 kHz and 48 kHz (32 kbps to 320 kbps) [JPEG] (Extension:.JPG,.jpg,.JPEG,.jpeg) Disc: DVD-R/RW, CD-R/RW JPEG files taken on a digital camera that conform to DCF Standard (Design rule for Camera File system) Version 1.0 are displayed. Files that have been altered, edited or saved with computer picture editing software may not be displayed. This unit cannot display moving pictures, MOTION JPEG and other such formats, still pictures other than JPEG (e.g. TIFF), or play pictures with attached audio. [MPEG4] (Extension:.ASF,.asf) Disc: DVD-R/RW, CD-R/RW The recording date may differ from that of the actual date.

VIDEO SECTION Video system PAL625/50, PAL525/60, NTSC Composite video output Output level 1 Vp-p (75 ) Terminal Pin jack (1 system) Component video output 1 Vp-p (75 ) Y output level 0.7 Vp-p (75 ) PB output level PR output level 0.7 Vp-p (75 ) Terminal Pin jack (Y: green, PB: blue, PR: red) (1 system) SPEAKER SECTION [Front\speakers\SB-HF22] Type Speaker unit(s) Full range Output sound pressure Frequency range Dimensions (WtHtD) Mass [Surround\speakers\SB-HS22] Type Speaker unit(s) Full range Output sound pressure Frequency range Dimensions (WtHtD) Mass [Center\speaker\SB-HC22] Type Speaker unit(s) Full range Output sound pressure Frequency range Dimensions (WtHtD) Mass [Subwoofer\SB-HW22] Type Speaker unit(s) Woofer Output sound pressure Frequency range Dimensions (WtHtD) Mass GENERAL Power supply AC 220 V to 240 V, 50 Hz AC 110 V to 127 V / 220 V to 240 V, 50/60 Hz Main unit 47 W Power consumption 360 mmk58 mmk239 mm Dimensions (WtHtD) Main unit 2 kg Mass Operating temperature range 0 oC to r40 oC Operating humidity range 35 % to 80 % RH (no condensation)
For India, Nigeria, the Middle East and South Africa For Southeast Asia
1 way, 1 speaker system (Bass reflex) Impedance 5 6.5 cm Cone type 80 dB/W (1 m) 100 Hz to 25 kHz (j16 dB) 150 Hz to 22 kHz (j10 dB) 80 mmk119 mmk68 mm 0.32 kg 1 way, 1 speaker system (Bass reflex) Impedance 5 6.5 cm Cone type 80 dB/W (1 m) 100 Hz to 25 kHz (j16 dB) 150 Hz to 22 kHz (j10 dB) 80 mmk119 mmk68 mm 0.32 kg 1 way, 1 speaker system (Bass reflex) Impedance 5 6.5 cm Cone type 80 dB/W (1 m) 100 Hz to 25 kHz (j16 dB) 150 Hz to 22 kHz (j10 dB) 80 mmk119 mmk68 mm 0.39 kg 1 way, 1 speaker system (Bass reflex) Impedance cm Cone type 79 dB/W (1 m) 35 Hz to 350 Hz (j16 dB) 40 Hz to 200 Hz (j10 dB) 153 mmk230 mmk233 mm 2.1 kg
Power consumption in standby mode

approx. 0.9 W

[Note] 1 Specifications are subject to change without notice. Mass and dimensions are approximate. 2 Total harmonic distortion is measured by a digital spectrum analyzer.
RQTX1168-G_eng.book Page 19 Friday, April 23, 2010 4:28 PM

Troubleshooting guide

Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the following guide do not solve the problem, consult your dealer for instructions.

General operation

No response when any buttons are pressed.
This unit cannot play discs other than the ones listed in these operating instructions. ( 17) The unit may not be operating properly due to lightning, static electricity or some other external factor. Turn the unit off and then back on. Alternatively, turn the unit off, disconnect the AC mains lead, and then reconnect it. Condensation has formed. Wait 1 to 2 hours for it to evaporate.

No power.

Insert the AC mains lead securely. ( 7) 5)
The unit is automatically switched to standby mode.
The Sleep timer was working and had reached the set time limit. ( The Auto AUX link was working. ( 9)
No response when remote control buttons are pressed.
Check that the batteries are installed correctly. ( 8) The batteries are depleted. Replace them with new ones. ( 8) Aim the remote control at the remote control signal sensor and operate. ( 5)

Unit displays

The display is dark.
Select BRIGHT in FL DIMMER in the OTHERS menu. ( 15) 17)
Other products respond to the remote control.
Change the remote control operating mode. ( 5)

NO PLAY

You inserted a disc the unit cannot play; insert one it can. ( You inserted a blank disc. You inserted a disc that has not been finalised.

No picture or sound.

Check the video or speaker connection. ( 6, 7) Check the power or input setting of the connected equipment and the main unit. Check that the disc has something recorded on it.

NO DISC

You have not inserted a disc; insert one. You have not inserted the disc correctly; insert it correctly. ( 11)
You have forgotten your ratings password.
Reset all the settings to Factory Preset. While stopped and DVD/CD is the source, press and hold [] (Stop) on the main unit and [S10] on the remote control until INITIALIZED disappears from the TV. Turn the unit off and on again. All settings will return to the default values. (This does not work during program and random modes, or when setup menu or START menu is displayed.)

OVER CURRENT ERROR

The USB device is drawing too much power. Switch to DVD/CD mode, remove the USB and turn the unit off.
Check and correct the speaker cable connections. If this does not fix the problem, consult the dealer. ( 6)
Some characters are not displayed correctly.
Characters other than English alphabet and Arabic numerals may not be displayed correctly.
There is a power supply problem. Consult the dealer.

DVD U11

Disc may be dirty. Wipe it clean.

Disc operation

It takes time before play starts.
Play may take time to begin when an MP3 track has still picture data. Even after the track starts, the correct play time will not be displayed. This is normal. [MP3] This is normal on DivX video. [DivX]
Incorrect operation performed. Read the instructions and try again.

DVD H DVD F

stands for a number. Trouble may have occurred. The numbers following H and F depend on the status of the unit. Turn the unit off and then back on. Alternatively, turn the unit off, disconnect the AC mains lead, and then reconnect it. If the service numbers fail to clear, note the service number and contact a qualified service person.

A menu screen appears during skip or search. [VCD] Playback control menu does not appear.
[VCD] with playback control Press [ STOP] twice and then press [1 PLAY].
Program and Random play do not work. [DVD-V]
These functions do not work with some DVD-Videos.

REMOTE 1 or REMOTE 2

Match the modes on the main unit and remote control. Depending on the number being displayed (1 or 2), press and hold [OK] and the corresponding numbered button ([1] or [2]) for at least 2 seconds. ( 5)

Play does not start.

This unit may not play MPEG4 that contains still picture data. If playing DivX VOD content, refer to the homepage where you purchased the DivX VOD content. (Example: www.divx.com/vod) [DivX] If a disc contains CD-DA and other formats, proper playback may not be possible.

No subtitles.

Display the subtitles. (SUBTITLE in Menu 1) ( 13) Subtitles may not be displayed depending on the disc. [DivX]
Point B is automatically set.
The end of an item becomes point B when it is reached.
The Setup menu cannot be accessed.
Select DVD/CD as the source. Cancel Program and Random play. ( 11)
This is normal for Video CDs.
RQTX1168-G_eng.book Page 20 Friday, April 23, 2010 4:28 PM

Effects do not work.

Some audio effects do not work or have less effect with some discs.

Progressive video

There is ghosting when progressive output is on.
This problem is caused by the editing method or material used on DVDVideo, but should be corrected if you use interlaced output. When using the COMPONENT VIDEO OUT terminal, set VIDEO OUT (I/P) in VIDEO menu to INTERLACE. ( 15) Alternatively, press and hold [CANCEL] until the picture is displayed correctly.
Humming is heard during play.
An AC mains lead or fluorescent light is near the main unit. Keep other appliances and cables away from the main unit.

No sound.

There may be a slight pause in sound when you change the play speed. Audio may not be output due to how files were created. [DivX] If the input source is bitstream, set the sound setting to PCM on the external equipment.
Pictures not in progressive output.
Select PROGRESSIVE in VIDEO OUT (I/P) in VIDEO menu. ( The units VIDEO OUT terminal outputs the interlaced signal. 15)

No sound from the TV.

Confirm the audio connection. Press [EXT-IN] to select the corresponding source. ( 7, 9)
Distorted sound or noise is heard.
Adjust the position of the FM antenna. Use an outdoor antenna. ( 7)
No sound from the surround speakers.
Ensure 5.1ch layout mode is selected in Speakers position ( 8, EASY SETUP settings) and press [SURROUND] to select MULTI-CH. ( 10)

A beat sound is heard.

Turn the TV off or move it away from the unit.

Picture

The picture on the TV is not displayed correctly or disappears.
The unit and TV are using different video systems.
For India, Nigeria, the Middle East and South Africa
The USB drive or its contents cannot be read.
The USB drive format or its contents is/are not compatible with the system. ( 14) The USB host function of this product may not work with some USB devices. USB devices with storage capacity of more than 32 GB may not work in some instances.
Use a multi-system or PAL TV. For Southeast Asia Use a multi-system or NTSC TV. The system used on the disc does not match your TV. PAL discs cannot be correctly viewed on an NTSC TV. This unit can convert NTSC signals to PAL 60 for viewing on a PAL TV (NTSC DISC OUT in VIDEO menu). ( 14) Ensure that the unit is connected directly to the TV, and is not connected through a VCR. ( 7) Mobile telephone chargers can cause some disturbance. If you are using an indoor TV antenna, change to an outdoor antenna. The TV antenna wire is too close to the unit. Move it away from the unit. Change SOURCE SELECT in Menu 2. [DivX] ( 13) When using the COMPONENT VIDEO OUT terminal, ensure that progressive output is not selected when the connected TV is not progressive compatible. Press and hold [CANCEL] until the picture is displayed correctly.
Slow operation of the USB device.
Large file size or high memory USB device takes longer time to read and display on the TV.

TV displays

The operation is prohibited by the unit or disc.
THIS DISC CANNOT BE PLAYED IN YOUR REGION.
Only DVD-Video discs that include or have the same region number as the one on the rear panel of this unit can be played. ( Cover page)

Picture stops. [DivX]

Picture may stop if the DivX files are greater than 2 GB.
Picture size does not fit the screen.
Change TV ASPECT in the VIDEO menu. ( 14) Use the TV to change the aspect. Change the zoom setting. (ZOOM in Menu 2) ( 13)
AUTHORIZATION ERROR [DivX] You are trying to play the DivX VOD content that was purchased with a different registration code. You cannot play the content on this unit. ( 16) RENTAL EXPIRED [DivX] The DivX VOD content has zero remaining plays. You cannot play it. ( 16)