Philips Grooming kit

9-in-1 Waterproof
Superior visibility, maximum precision
The revolutionary MicroBlade technology is designed to give you unprecedented precision to create the exact look you had in mind.
Best performance that feels great MicroBlade technology for unprecedented precision Sharper than Titanium*: hardened steel blades for long life Brings maximum ease of use 100% waterproof for shower use and easy cleaning Create the look you want 9+ attachments to create any style you like from head to toe

QG3190

Grooming kit

QG3190/00

Pro 9-in-1 Waterproof

Specifications

Cutting system
Number of length settings: 9 Self-sharpening stainless steel blades Cutting element: Stainless steel blades

Highlights

Service
2-year worldwide guarantee

100% waterproof

Create the look you want

Ease of use

Secured length settings Storage: Stand Maintenance free - No Oil need Wet & Dry: 100 % waterproof for easy use and cleaning Cleans under the tap
Styles: Short beard, Chin straps, Goatee, Moustache, Sideburns, Clip your head hair, Detailed styling, Eyebrow style

Attachments

Power system
Charging time: 10 hours Running time: 35 minutes Usage: Cordless only
4 position eyebrow comb 9 position beard and moustache comb 9 position hair clipper comb Full size trimmer blade: 32 mm Micro foil shaver: 21 mm Micro trimmer: 8 mm Nose and ear trimmer Precision trimmer: 21 mm
100% waterproof for easy use and cleaning.

Accessories

MicroBlade technology

Cleaning brush

The revolutionary MicroBlade Technology is designed to give you unprecedented precision to create the exact look you had in mind.

Sharper than Titanium*

The hardened Inox Steel self-sharpening blades are sharper than Titanium*.

9+ attachments

Issue date 2010-10-21 Version: 11.0.1
2010 Koninklijke Philips Electronics N.V. All Rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. www.philips.com
Philips offers you a new grooming kit, that allows you to create any style you like from head to toe with superior precision, giving you that sense of pride of a perfect end result

12 NC: 00000

English
Introduction Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. General description(Fig.1) A Handle B Setting indicator C On/off switch D Socket for appliance plug E Micro shaver F Hair clipping comb G Setting selector H Nose/ear hairtrimmer I Precision timmer J Precisioncomb K Micro trimmer L Cutting element M Beard trimming comb N Cleaning brush O Adapter P Appliance plug Q Charging light R Stand Important Read this user manual carefully before you use the appliance and save it for future reference. ----Danger Make sure the adapter does not get wet. Warning Check if the voltage indicated on the adapter and on the appliance corresponds to the local mains voltage before you connect the appliance. The adapter contains a transformer. Do not cut off the adapter to replace it with another plug, as thiscauses a hazardous situation. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Caution Use, charge and store the appliance at a temperature between 15C and 35C. Only use the adaptersupplied to charge the appliance. If the adapter is damaged, always have it replaced with one of the original type in order to avoid a hazard. Do not use the appliance when one of the attachments or combs is damaged or broken as this may cause injury. Be careful with hot water. Always check if the water is not too hot, to prevent your hands from getting burnt. This appliance is only intended for clipping human scalp hair and for trimming and grooming the human beard, moustache, sideburns, nose hair, ear hair and eyebrows. Do not use it for another purpose. Never try to trim your eyelashes. If the appliance is subjected to a major change in temperature, pressure or humidity, let the appliance acclimatise for 30 minutes before you use it. Compliance with standards The appliance complies with the internationally approved IEC safety regulations and can be safely used in the bath or shower and cleaned under the tap(Fig.2). This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly andaccording to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today. Preparing for use Charging
This ensures that all parts of the head are clearly visible and within easy reach. 2 Comb the hair in the direction of growth(Fig.7). 3 Put the cutting element on the handle (see sectionAttaching/detachingattachments in chapter Preparing for use). Clipping withhair clipping comb 1 Slide the hair clipping comb into the guiding grooves on both sides of the handle (click)(Fig.8). 2 Press the setting selector upwards or downwards to set thedesired setting(Fig.9). ,, The setting indicator on the back of the appliance shows the selected setting. (Fig.10) The tableshows how long the hair will be after clipping at the different settings. When you clip for the first time, start at the highest setting (9) to familiarise yourself with the appliance. Settings of hair clipping comb
Setting Hair length after clipping(mm) 9 20
Make sure that the flat part of the comb is always fully in contact with the skin to obtain an even result.
5 Regularly remove cut hair from thecomb. If a lot of hair has accumulated in the comb, remove the comb from the appliance and blow and/or shake the hair out of it. Trimming at the stubble look setting 1 To create a stubble look, trim with the beard trimming comb set to hair length setting 1. (Fig.18) Beard trimming withoutbeard trimming comb Use thebeard trimmer without the beard trimming comb tocontouryour beard and to remove single hairs. Cutting without comb results in a very short stubble beard (0.6mm). 1 Press the setting selector upwards and pull the beard trimming comb off the handle(Fig.19). 2 Make careful and controlled movements with the beard trimmer. Touch the hair lightly with the cutting element. Beard trimming with precision trimmer andprecision comb Use the precision trimmer with the precision comb to trim smaller areas and to create designer beards. 1 Put the precision trimmer on the handle (see section Attaching/detaching attachments in chapter Preparing for use). 2 Slide the precision comb into the guiding grooves on both sides of the handle (click)(Fig.20). 3 Press the setting selector upwards or downwards to set the desired setting. (Fig.21) ,, The setting indicator on the back of the appliance shows the selected setting. The table shows how long the hair will be after trimming at the different settings. When you trim for the first time, start at the highest setting (4) to familiarise yourself with the appliance. Settings of precision comb

Setting Hair length after trimming (mm) 4 8
Contouring eyebrows/removing single facial hairs with micro trimmer Use the micro trimmer to shape and define eyebrows and to remove single facial hairs Never trim your eyelashes. Never come too close to your eyes. Do not use micro trimmer too close to a mirror. 1 Put the micro trimmer on the handle (see section Attaching/detaching attachments in chapter Preparing for use). 2 When you contour eyebrows, stretch the skin of theeyelid(Fig.29). 3 Make careful and controlled movements with the micro trimmer. -- Always move the micro trimmer against the direction of hair growth. -- Always make sure the micro trimmer is fully in contact with the skin. Shaving Shaving with the micro shaver Use the micro shaverto createsmooth, well-defined contours. Before you use the micro shaver, always check it for damage or wear. If the foil or cutter is damaged or worn, do not use the micro shaver, as injury may occur. If the foil is damaged, replace the top part of the micro shaver and if the cutter is damaged, replace the whole attachment before you use the micro shaver again. 1 Pre-trim the contours you want to shave with the cutting element without comb or the precision trimmer without comb. 2 Put the micro shaver on the handle (see sectionAttaching/detachingattachments in chapter Preparing for use). 3 Gently press the micro shaver onto the skin and shave along contoured edges to remove any stubble. Do not press too hard. Cleaning Never use compressed air, scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. Note:The appliance does not need any lubrication. Clean the appliance every time you have used it. 1 Make sure the appliance is switched off and disconnected from the socket. 2 Remove any comb and/orattachment from the appliance. 3 If you have used the micro shaver, separate its top partfrom its body(Fig.30). The shaving foil is very delicate. Handle it carefully. Replace the top part of themicro shaver if the shaving foil is damaged. Do not clean the shaving foil with the brush, as this may cause damage. 4 Blow and/or shake out any hair that has accumulated in the attachments and/or combs. 5 Clean the attachments, the combsand the appliancewith lukewarm water or with the cleaning brush. 6 Clean the adapter with the cleaning brush or a dry cloth. Keep theadapter dry. Storage Store the appliance and attachments in the charging stand to prevent damage. Replacement If the adapter is damaged, always have it replaced with one of the original type in order to avoid a hazard. Only replace damaged or worn attachmentsor combs with original Philipsreplacement attachments or combs Philips replacement attachments, combs and adapters are available from your Philips dealer and authorised Philips service centres. If you have any difficulties obtaining an adapter or replacement attachments and combsfor the appliance, contact the Philips Customer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). Environment -- Do not throw away the appliancewith the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, youhelp to preserve the environment(Fig.31). -- The built-in rechargeable battery contains substances that may pollute the environment. Always remove the battery before you discard and hand in the appliance at an official collection point. Dispose of the battery at an official collection point for batteries. If you have trouble removing the battery, you can also take the appliance to a Philips service centre. The staff of this centre will remove the battery for you and will dispose of it in an environmentally safe way. (Fig.32) Disposal of the battery Only remove the battery when it iscompletely empty. 1 Disconnect the appliance from the mains and let the appliance run until the motor stops. 2 Remove any comb and/or attachment from the appliance. 3 Remove the top part of the appliance with a screwdriver(Fig.33). 4 Pull the inner part out of the appliance(Fig.34). 5 Pry open the inner partand pull out the battery(Fig.35). 6 Cut the wires close to the battery with a pair of household scissors. Do not connect the appliance to the mains again after you have removed the battery.

L M G C B A R Q

Tip:Write down the hair length settings you have used to create a certain hairstyle as a reminder for future clipping sessions. 3 Switch on the appliance. 4 Move the appliance through the hair slowly. -- To clip in the most effective way, move the appliance against the direction of hair growth. -- Since all hair does not grow in the same direction, you need tomove the appliance in different directions (upward, downward or across)(Fig.11). -- Make sure that the flat part of the comb is always fully in contact with the scalp to obtain an even result. -- Make overlapping passes over the head to ensure that you cut all the hair that needs to be cut. -- To achieve a good result with curly, sparse or long hair,use a comb to guide the hair towards the appliance. 5 Regularly remove cut hair from thecomb. If a lot of hair has accumulated in the comb, remove the comb from the appliance and blow and/or shake the hair out of it. Contouring withouthair clipping comb You can use the appliance without hair clipping comb to clip hair very close to the skin (0.6mm) or to contour the neckline and the area round the ears. Be careful when youclip withoutcomb because the cutting elementremoves every hair it touches. 1 Press the setting selector upwards and pull the comb off the handle. (Fig.12) 2 Before you start to contour the hairline round the ears, comb the hair ends over the ears. 3 Tilt the appliance in such a way that only one edge of the cutting element touches the hair ends when you shape the contours round the ears(Fig.13). Only cut the hair ends. The hairline should be close to the ear. 4 To contour the neckline and sideburns, turn the appliance and make downward strokes(Fig.14). Move the appliance slowly and smoothly. Follow the natural hairline. Cutting shapes withmicro trimmer You can use the micro trimmer to cut shapes in scalp hair. It cuts hair very close to the skin (0.6mm). Be careful when you use the micro timmer becauseit removes every hair it touches. 1 Put the micro trimmer on the handle (see section Attaching/detaching attachments in chapter Preparing for use). 2 Make careful and controlled movements with the micro trimmer. -- To achieve a good cutting result, move the trimmer against the direction of hair growth. -- Always make sure the micro trimmer is fully in contact with the skin. Trimming Preparing for trimming Make sure that the appliance is fully charged before you start trimming. It is not possible to run the appliance from the mains. 1 Comb the hair to be trimmed (beard, moustache, sideburns, eyebrows) with a fine comb. 2 Put the cutting element on the handle (see section Attaching/detaching attachments in chapter Preparing for use). Beard trimming withbeard trimming comb 1 Slide the beard trimming comb into the guiding grooves on both sides of the handle (click)(Fig.15). 2 Pressthe setting selector upwards or downwards to set the desired setting(Fig.16). ,, Thesetting indicator on the back of the appliance shows the selected setting. The tableshows how long the hair will be after trimming at the different settings. When you trim for the first time, start at the highest setting (9) to familiarise yourself with the appliance. Settings of beard trimming comb

Settings Hair length after trimming(mm) 9 18
2 Za element tncy na uchwyt (patrz cz Zakadanie i zdejmowanie nasadek w rozdziale Przygotowanie do uycia). Przycinanie brody z nasadk grzebieniow 1 Wsu nasadk grzebieniow do przycinania brody w rowki po bokach urzdzenia (usyszysz kliknicie)(rys.15). 2 Wybierz dane ustawienie, przesuwajc w gr lub w d przecznik ustawie(rys.16). ,, Wybrane ustawienie jest pokazywane przez wskanik z tyu urzdzenia. Tabela przedstawia dugo wosw po przycinaniu z rnymi ustawieniami. W przypadku przycinania po raz pierwszy ustaw na pocztek maksymalne ustawienie (9), aby zapozna si z urzdzeniem. Ustawienia nasadki grzebieniowej do przycinania brody
Ustawienia Dugo wosw po przyciciu(mm) 9 18

4203.000.5883.2

-------
Beard trimming with precision trimmerbut without precision comb Use the precision trimmer without the precision comb to shape your moustache and sideburns, to define contours and to remove single hairs. 1 Press the setting selector upwards and pull the precision comboff the handle(Fig.22). 2 Hold the appliance upright and trim the desired areas(Fig.23). Grooming facial hair (nose hair, ear hair and eyebrows) Trimming nose hair 1 Put the nose/ear hair trimmer on the handle (see section Attaching/detaching attachments in chapter Preparing for use). 2 Make sure your nostrils are clean. 3 Switch on the appliance and insert the tip of the trimmer into one of your nostrils. (Fig.24) Do not insert the tip more than 0.5cm into your nostril. 4 Slowly move the tip in and out while turning it round at the same time to remove unwanted hair. To reduce the tickling effect, make sure that you press the side of the tipfirmly pressed against the skin. Trimming ear hair 1 Put the nose/ear hair trimmer on the handle (see section Attaching/detaching attachments in chapter Preparing for use). 2 Clean the outer ear channel. Make sure it is free from wax. 3 Switch onthe appliance and move the tip softly round the ear to remove hairs that stick out beyond the rim of the ear. (Fig.25) 4 Carefully insert the tip into the outer ear channel. (Fig.26) Do not insert the tip more than 0.5cm into the ear channel as this could damage the eardrum. Trimming eyebrows with precision trimmer and precision comb Use the precision trimmer with the precision comb to trim entire eyebrows to a uniformlength. Nevertrim your eyelashes. Never come too close to your eyes. 1 Comb the eyebrowsin the direction of hair growth(Fig.27). 2 Put the precision trimmer on the handle (see section Attaching/detaching attachments in chapter Preparing for use). 3 Slide the precision comb into the guiding grooves on both sides of the handle (click)(Fig.20). 4 Press thesetting selector upwards or downwards to set the desired setting. (Fig.21) ,, The setting indicator on the back of the appliance shows the selected setting. The table shows how long the hair will be after trimming at the different settings. When you trim for the first time, start at the highest setting (4) to familiarise yourself with the appliance. Settings of precision comb

Ustawienie Dugo wosw po przyciciu (mm) 4 8
Charge the appliance for at least 10 hours before you use it for the first time and after a long period of disuse. When the appliance is fully charged, it has a cordless operating time of up to 35 minutes. Do not charge the appliance for more than 24 hours. The appliance does not run from the mains. You cannot charge the appliance in the stand. 1 Insert the appliance plug into thesocket of the appliance and put the adapter in the wall socket(Fig.3). ,, The charging light on the adapter goes on to indicate that the appliance is charging(Fig.4). Note:The charging light does not changecolour and does not goout when the appliance is fully charged. Optimising the lifetime of the rechargeable battery ---Remove the adapter from the wall socket when the battery is fully charged (which takes 10 hours). Do not leave the appliance plugged into the wall socket for more than 24 hours. Discharge the battery completely twice a year by letting the motor run until it stops. Then fully recharge the battery. Attaching/detachingattachments All attachments (cutting element, precision trimmer, micro trimmer, micro shaver and nose/ear hair trimmer) can be attached and detached in the same way. 1 To attach the attachment, push it onto the handle(Fig.5). 2 To detach the attachment,pull it off the handle. (Fig.6) Hair clipping Preparing for hair clipping Make sure that the appliance is fully charged when you start clipping. It is not possible to run the appliance from the mains. Only use the appliance on clean, dry hair. Do not use it on freshly washed hair. 1 Make sure that the head of the person whose hair you intend to cut is at the same level as your chest.
Przed pierwszym uyciem lub po dugim okresie nieuywania urzdzenie naley adowa co najmniej przez 10 godzin. W peni naadowane urzdzenie moe dziaa bezprzewodowo do 35minut. Nie aduj akumulatora duej ni 24 godziny. Urzdzenie to nie ma moliwoci podczenia do sieci elektrycznej. Urzdzenia nie mona adowa na podstawce. 1 W wtyczk zasilacza do gniazda w urzdzeniu, a zasilacz do gniazdka elektrycznego(rys.3). ,, Na zasilaczu zapali si wskanik adowania informujcy o adowaniu urzdzenia(rys.4). Uwaga: Po cakowitym naadowaniu urzdzenia wskanik adowania nie zmienia koloru ani nie ganie. Optymalizacja okresu eksploatacji akumulatora ---Po cakowitym naadowaniu akumulatora, ktre trwa 10 godzin, wyjmij zasilacz z gniazdka elektrycznego. Nie pozostawiaj urzdzenia podczonego do gniazdka elektrycznego na duej ni 24 godziny. Dwa razy w roku cakowicie rozaduj akumulator, pozwalajc, by urzdzenie dziaao, a do samoczynnego zakoczenia pracy. Nastpnie naaduj go.