PIAGGIO BEVERLY 500 CRUISER
SLIP-ON STREET LEGAL EXHAUST SYSTEM
The Slip-On is the first stage in transforming your exhaust system. In addition to increasing your power, the Akrapovi Slip-On system gives your scooter a distinctive deeper sound and also changes its visual appearance. Even from afar you can see and hear that this is no mass-produced system. This system was developed based on rich experience and the result is a product that suits a scooter perfectly. Installation is a snap. Adding the optional catalytic converter makes the Slip-On exhaust system street legal. PERFORMANCE Measurements of the Akrapovi Slip-On system on the Piaggio Beverly 500 Cruiser (without muffler insert): Power & Torque: The Akrapovi Slip-On exhaust system increases your engine power and its torque at every rpm. Maximum power of 31 HP is reached at 6700 rpm. The greatest power gain of 1.7 HP is at 7550 rpm.

DESCRIPTION

PIAGGIO BEVERLY CRUISER 500ie
ORIGINAL EXHAUST 31 AKRAPOVIC SLIP-ON EXHAUST 110 Speed 2,5 5,0 7,5 10,0 Timer1 Secnds SuperFlow WinDyn V2.4 12,5 15,0 10:39:55

PERFORMANCE

max. rear wheel power HP / rpm

AKRAPOVIC

max. increased power

27 WhlPwr 24

(measured on SuperFlow Cyle Dyn)

29.7 / 6700

31 / 6700

1.7 / 7550

ADDITIONAL DATA
weight comparison (kg) stock 9.2 AKRAPOVIC SS link pipe 4.5 noise measurements (dB / rpm) legal for street use stock 89 / 3625 YES TITANIUM link pipe difference stock - S.S. 4.7 AKRAPOVIC 89 / 3625 stock TITANIUM -
Technical specifications of Akrapovic exhaust systems and related products subject to change without notice.

05/18/11

Product code: S-PI4SO1-HRSS
Akrapovi d.d. 2011 all rights reserved

19.05.2011

SHEMATIC
WARNING! HOMOLOGATION IS VALID ONLY WHEN OPTIONAL CATALYTIC CONVERTER IS INSTALLED!

V-EC148 END CAP SET

P-TT28 BELT P-HF421 FITTING KIT

P-X69 BRACKET

PIAGGIO MP3 LT 400 i.e., Partial exhaust system / Slip-ON line / Street legal PIAGGIO MP3 RST 400 i.e., Partial exhaust system / Slip-ON line / Street legal PIAGGIO XEVO 400, Partial exhaust system / Slip-ON line / Street legal PIAGGIO BEVERLY CRUISER 500 i.e., Partial exhaust system / Slip-ON line / Street legal GILERA FUOCO 500 , Partial exhaust system / Slip-ON line / Street legal GILERA NEXUS 500 , Partial exhaust system / Slip-ON line / Street legal PEUGEOT SATELIS 400, Partial exhaust system / Slip-ON line / Street legal PEUGEOT SATELIS 500, Partial exhaust system / Slip-ON line / Street legal Product code: S-PI4SO1-HRSS
P-KAT-028 CATALYTIC CONVERTER (OPTIONAL)

P-GUV004 RUBBER CAP

V-TUV114 NOISE REDUCTION INSERT
MUFFLER REPAIR KITS KIT REPACK SLEEVE Part Nr.

P-RPCK60 P-RKS311ZAASS40

P-HST2AL STICKER P-TT27 BELT M-HZAA00202SS MUFFLER P-S2 SPRING L-PI4SO1SS LINK PIPE

P-R53 CLAMP P-R54R CLAMP

BEVERLY 250 & 500 P.A.

BEVERLY 250

Technical Specifications
Engine Capacity Maximum Power Cooling Starter Transmission Front Suspension Rear Suspension Front brakes Rear brakes Front/Rear Wheel Front/Rear Tyre: Length Width Wheel Base Dry Weight Fuel tank capacity Gas Mileage Under Seat storage Piaggio Leader Single Cylinder, 4 stroke, 4 valve with Single Overhead cam 198cc 21hp at 950 rpm Liquid Electric Automatic with Continual Variable Transmission Telescopic hydraulic fork, 35mm stem Dual rear shock absorbers with preload adjuster 260mm disc 260mm disc 3.00x16 / 3.50x16 Tubeless 110/70-16 / 140/70-16 84.4 30.4 58.Lbs 2.6 gallons 73mpg** Fits 2 open face helmets

BEVERLY 500

Engine Capacity Maximum Power Cooling Starter Transmission Front Suspension Rear Suspension Front brakes Rear brakes Front/Rear Tyre: Length Width Wheel Base Dry Weight Fuel tank capacity Gas Mileage Seat height Gears Clutch Chassis Max Torque Distribution Piaggio Master single cylinder, four-stroke catalytic 460cc 39hp at 7250rpm (29.4 Kw) Liquid Electric Automatic with continual variable transmission 1.6 (41mm) Telescopic hydraulic fork Engine acts as oscillating fork, two dual effect hydraulic dampens, 4 position coil spring Twin stainless steel disc 10.23 (260mm) Stainless steel disc 9.45 (240mm) with fixed piston (STET) 1.34 (34mm) Tubeless 110/70-16 (52s) / Tubeless 150/70-14 (66s) 87.2 (2,215mm) 30.3 (770mm) 61 (1,550 mm) 436.5 lbs (198kg) 3.49 gallons (13.2 litres) 60mpg 30.9 (785mm) CVT automatic ratio variation (twist & go) Centrifugal Double Cradle in High-tensile street tubes 42.1 Nm at 6250 rpm Single overhead camshaft (SOHC) with four valves
Technical specifications of Piaggio Beverly 250 & 500 P.A. may change without notice.
Office: Plot 15, Block 113, 3rd Floor, Lekki-Epe Express Way, Lekki Peninsula Scheme 1, Lekki, Eti-Osa, Lagos, Nigeria RC 156754. VAT: LCV 06002156754 Telephone numbers Lagos - Sales: Jackson Falade +36, Technical: Tony Ekere +35, Admin: Fred Okoli +27 Telephone number Abuja: Ishaku Shok +31 Email: info@amscolimited.com Website: www.amscolimited.com