Plantronics Explorer 240 & 395

User Guide

Welcome
Thank you for purchasing the Plantronics Explorer 240 or 395 headset. This guide contains instructions for setting up and using your new headset. Before using this product, please refer to the For Your Safety booklet for important safety, charging, battery and regulatory information.

Getting Assistance

The Plantronics Technical Assistance Center is ready to assist you. You can find answers to frequently asked questions, ask a question using e-mail, receive service over the Internet, or speak directly with a representative. Visit www.plantronics.com/support or call your country support line mentioned at the back of this user guide. note If you are considering returning this headset, please contact the Technical Assistance Center first.

Registering Your Product

Visit www.plantronics.com/productregistration to register your product online so we can provide you with the best service and technical support. Note For pairing your headset, your PIN code/Passkey is 0000.

Contents

Package Contents and Features...iv. Charging Your Headset... 1. Using the AC charger.. 1 What is Bluetooth?... 2 Plantronics QuickPair Technology.. 2 Range (the distance between headset and phone).. 2 Pairing Your Headset.... 3 Adjusting the Fit... 4. Headset Controls and Indicators... 6. Troubleshooting... 9 Product Specifications... 10
Package Contents and Features
Note Your headset may look different than the illustration, but will still work as described.
Headset Front* Volume Control Button Call Control Button Status Light Power On/Off Switch Swivel Earloop [fits either ear] Headset Back Microphone
Speaker/Eartip Micro USB Charging Jack
Power On/Off Switch AC Charger 100240V
* For illustration purposes only; designs will vary by model number. iv

Charging Your Headset

Your new headset performs best when it is fully charged. While your headset is charging, the indicator light glows red. When your headset is fully charged, the indicator light turns blue. Do not use your headset while it is connected to the charger. How to Charge Your Headset Using the AC Charger
1 Plug the charger into a power outlet. 2 Connect the charger cable to the headset. 1

Charging time

2 hours. ull charge F 1 hour. Minimum charge before first use
note Never charge the battery where the temperature may fall below 0C (32F) or rise above 40C (104F) for example, in an unattended motor vehicle. Do not charge the battery while it is unattended. 1

What Is Bluetooth?

Bluetooth wireless technology provides a way for devices, like headsets and phones, to communicate with each other without wires. Pairing is the set-up process of introducing your headset to your phone. Before using your headset for the first time, you must pair it with your Bluetooth-enabled phone. Plantronics QuickPair Technology To simplify the Bluetooth setup process, your new headset uses Plantronics QuickPair technology. This process is shown on the next page. he first time you turn your headset on, your headset T automatically enters pairing mode for 10 minutes (the indicator light flashes red and blue). U ntil you successfully pair your headset with a Bluetoothenabled phone, every time you turn it on it will enter pairing mode. To later pair to a new phone, turn on the headset, then press and hold the Call Control button until red then blue flashing appears, which indicates pairing mode status. Range (the distance between headset and phone) o maintain the connection, keep your headset within 10 meters T (33 feet) of your phone. or the least amount of interference place the headset and F phone on the same side of your body. If you move too far from your phone and lose the Bluetooth connection: he headset may reconnect automatically within 60 seconds when t you move closer to your phone (you will hear a low tone), OR ou may have to tap the Call Control button to reconnect (you y will hear a low tone), OR f neither of the above options work, you may have to i reconnect to your headset using your phones Bluetooth menu.

Pairing Your Headset

SETTINGS Time and Date

BLUETOOTH

Bluetooth
Sound Settings Network Services Security Reset Settings

Phone Settings

Discover/ Search

2XXPlantronics

PASSKEY
How to Pair Your Phone With Your Headset for the First Time
1 Turn on the Bluetooth feature on your phone. 2 Turn the headset on.
For most phones, select Settings/Tools > Connections > Bluetooth > On. See your phones user guide for more information. Turn on your headset by sliding the Power On/Off Switch toward the microphone. Wait until the indicator light flashes red then blue. If you dont see the red then blue flashes, turn the headset off, then turn it on again. Press and hold the Call Control button until you see the red then blue flashes that indicate pairing mode status.

3 Set your Bluetooth phone to discover to locate the headset.
This usually involves going to setup, connect or Bluetooth menu on your phone and selecting the option to discover or add a device.
4 Once available headsets are listed, select your headset (for
example 2XXPlantronics or 3XXPlantronics). If prompted for a passkey, enter 0000. When pairing is successful, the indicator on your headset flashes blue. Your phone will also confirm when pairing is complete.

Adjusting the Fit

The headset comes out of the box with the earloop in place to wear on your right ear.
1 Place the earloop behind your ear.
Rotate the headset so that the speaker rests comfortably in your ear. Callers can hear you best when you point the microphone towards the corner of your mouth.
2 Align the microphone with the corner of your mouth.

Right Left

Its easy to move the earloop to fit on your left ear.
1 Lift the earloop. 2 Swivel the earloop to the right and push it back down.
Headset Controls and Indicators
Indicator Light On: Short blue flash Off: ong red flash, L then turns off None Tone On: Four rising tones Off: Four descending tones Brief low tone at the beginning or end of the call. Low tone

Action

Turn the headset on or off
On: lide the Power Switch S to the On position.
Off: lide the Power Switch S to the Off position.

Answer/end a call None

Tap the Call Control button.

Reject an incoming call

Press and hold the Call Control button until you hear a low tone.

Missed call indicator

Briefly press any button to cancel the indicator light.
Two simultaneous red/ blue flashes, a pause, then two more red/blue flashes (repeating for 5 minutes or until cancelled).
Action Enter the number on your phone and press send. Blue flash every 2 seconds until the call is ended. Red flashes Battery level 1/3 - 2/3 full Less than 1/3 full 1 More than 2/3 full Ringing None when checking level. Low battery tone indication: 3 tones when under 5 minutes talk time is remaining. Low tone at every volume level change. (Two tones at maximum volume level.) Indicator Light Tone
Make a call To check, simultaneously press and hold both the Call Control and Volume buttons for about 2 seconds. The indicator light flashes to show the charge level. Tap the Volume button to Single blue flash for every increase through 4 levels; volume level change. tap at top level to return to lowest volume setting.

Battery level

Adjust the volume (during call)
WARNING Do not use headphones/headsets at high volumes for an extended period of time. Doing so can cause hearing loss. Always listen at moderate levels. See www.plantronics.com/healthandsafety for more information on headsets and hearing.
Indicator Light None Tone Single low tone; phone may prompt with Name please or tones. Two brief low tones Long low tone when moving to phone; short low tone when moving to headset.

Voice Dial

Press and hold the Call Control button until you hear a tone. None None

Redial last number

Tap the Call Control button twice.
Transfer a call from headset to phone, or from phone to headset
While the call is in progress, press and hold the Call Control button until you hear a tone.

Troubleshooting

My headset does not work with my phone Your headset may not have been in pairing mode when your phone was searching for it. Repeat the pairing process on page 3. You may have made incorrect menu selections on your phone while pairing. Repeat the pairing process on page 3. Callers cannot hear Make sure the headset Power Switch is in the ON position. me, or I cannot hear callers/dialing Your headset may be out of Bluetooth range tone or experiencing interference. Move the headset closer to your phone, and make sure your headset and phone are on the same side of your body. See Range on page 2. Your headset battery is drained. Recharge the battery using the supplied AC power adapter. The listening volume is too low. Tap the Volume button to increase the headset volume. My headset is flashing red then blue Your headset is in Pairing mode. If you are not trying to pair the headset, reset it by simply turning headset off then on again. Otherwise, see Pairing on page 3.

Product Specifications

Talk Time* Standby Time* Charge Time Range Power Requirements Battery Type Up to 5 hours Up to 7 days 2 hours Up to 10 meters (33 feet) 5V DC 180 mA Rechargeable, non-replaceable, lithium ion polymer
Storage/Usage/ 0 C - 40 C (32 F - 104 F) Charging Temperature Bluetooth version 2.1 + EDR (Enhanced Data Rate) Supports your phones Bluetooth Hands-free (HFP), Headset (HSP) and Secure Simple Pairing (SSP) profiles. * Battery enabled. Performance may vary by device.
For safety information, see the separate For Your Safety booklet. For warranty information, see the separate 2 Year Warranty leaflet or visit www.plantronics.com
Plantronics Ltd Wootton Bassett, UK Tel: 0800 410014

Finland Tel: 0800 117095

Plantronics B.V. Hoofddorp, Nederland Tel: (0)0800 Plantronics (NL) (BE/LUX)
Plantronics Sarl Noisy-le-Grand France

Norge Tel: 80011336

www.plantronics.com
Czech Republic www.plantronics.com
Plantronics BV Regus House Harcourt Centre Harcourt Road Dublin 2 Ireland Service ROI: 896
Aby uzyska wicej informacji: www.plantronics.com

Danmark Tel: 46 10

Portugal Tel: 45 17
Plantronics GmbH Hrth, Deutschland Kundenservice: Deutschland 400 sterreich 500 Schweiz 340
he : , www.plantronics.com hu Tovbbi informcik: www.plantronics.com it Plantronics Acoustics Italia Srl Milano, Italia Numero Verde: 800 950934
Pentru informaii www.plantronics.com

: www.plantronics.com

www.plantronics.com :

Sverige Tel: 46 81

Plantronics Iberia, S.L. Madrid, Espaa Tel: 51 91
Daha fazla bilgi iin: www.plantronics.com
Plantronics B.V. Scorpius LR Hoofddorp Netherlands www.plantronics.com
2010 Plantronics, Inc. All rights reserved. Plantronics, the logo design, Plantronics Explorer, QuickPair and Sound Innovation are trademarks or registered trademarks of Plantronics, Inc. The Bluetooth name and the Bluetooth trademarks are owned by Bluetooth SIG, Inc., and are used by Plantronics, Inc. under license. All other trademarks are the property of their respective owners. U.S. Patents Pending 83240-03 Rev A

Plantronics Explorer 395

Reduces Noise and Wind from Your Calls
The Plantronics Explorer 395 is an attractively styled, universally compatible headset thats extremely easy to use. Going hands free is simple with this reliable headset that features separate buttons for volume, power on/off, and call answer/end. An ergonomic earloop offers you a comfortable, stable fit. Careful microphone placement reduces wind noise, enhancing Plantronics signature high-quality audio performance.
E asy set-up with any Bluetooth phone A ccented with premium design details D igital Signal Processing (DSP) reduces noise, wind and echo O n/off switch preserves battery life C ontoured eartip and lightweight design
Specifications Talk Time Standby Time Weight Wearing Style Noise Reduction Up to 5 hours1 Up to 1 weekgrams Over the ear Digital Signal Processing (DSP) Acoustic echo cancellation Mic placement reduces wind over mic Supports initial pairing with Bluetooth phones Li-ion polymer rechargeable AC/DC 100240V 2 hours for full charge Power on/off Call answer/end Quick battery check Call reject Volume up/down Last number redial2 Voice-activated dialing2
QuickPair Technology Battery Type Charge Connectors Charge Time Headset Controls
Bluetooth Wireless Technology
Version 2.1 + Enhanced Data Rate (EDR) Supports Secure Simple Pairing (SSP)3 Profiles: Hands-free v1.5 (HFP), Headset v1.1 (HSP) Range: Up to 33 feet from Bluetooth phone 1-year limited warranty

Service and Support

1 Performance is dependent upon battery and may vary by device. 2 If supported by phone and phone provider. 3 When supported by a Bluetooth device with v2.1.
Plantronics Technical Assistance: 866-363-2583 For more information about Plantronics Explorer 395 or other Plantronics products, please visit www.plantronics.com
2010 Plantronics, Inc. All Rights Reserved. Plantronics, the logo design, Plantronics Explorer, QuickPair and Sound Innovation are trademarks or registered trademarks of Plantronics, Inc. The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Plantronics, Inc. is under license. 3/10