Savi Go Wireless Headset System WG101/B

User Guide

Welcome
Congratulations on purchasing your new Plantronics product. This user guide contains instructions for setting up and using your Savi Go WG101/B (BUA-200 Adapter + WH100/B Headset) Wireless Headset System. Please refer to the separate safety instructions for important product safety information prior to installation or use of the product.
Plantronics Savi User Guide

Contents

1 Package Contents and Features.. 4
1.1 USB Adapter... 4. 1.2 Headset... 4
4 Using Your Headset System with Microsoft Office Communicator.. 9
Powering Headset On/Off... 9. Placing, Answering and Ending Calls with Microsoft Office Communicator.. 9 Muting a Headset Call.. 10 USB Adapter Indicator Light.. 10. Headset Indicator Lights and Tones.. 10 Out of Range Warning.. 11 Low Battery Warning.. 11 Checking Battery Level.. 11. Turning Headset Indicator Blue Flash On/Off.. 11 Mute Warning... 11 Pairing Headset to USB Adapter.. 11

2 Set Up... 6

2.1 Connecting USB Adapter to PC. 6 2.2 Connecting Power Supply to Charger Base... 6 2.3 Fitting Headset.. 7 2.4 Docking and Charging Headset. 7.

3 Test Call... 8

3.1 Making a Test Call Using Microsoft Office Communicator... 8.
5 Using Your Headset with Your Bluetooth Mobile Phone... 12
Pairing Your Headset to Your Bluetooth Mobile Phone.. 12. Placing, Answering and Ending Calls with Your Headset and Bluetooth Mobile Phone. 12.
6 Troubleshooting and Common Questions.. 13.
1 Package Contents and Features
1.1 Savi Go USB Adapter and Charger

Base Power Supply

USB Adapter

Charger Base

USB Charging Cable

1.2 Savi Go Headset

Headband Headset with Pre-Installed Earloop

Foam Ear Cushions

Extra Ear Tab
Savi Go USB Adapter Features

Pairing Button

Indicator Light

Savi Go Headset Features

Earloop Ear Tab
Call Control Button (also controls volume and mute functions)

Microphone

2 Set Up
2.1 Connecting USB Adapter to PC
1 Insert the USB adapter into USB Port on PC. The indicator
light on the base will be solid red to indicate the USB adapter is powered on.
2.2 Connecting Power Supply to Charger Base
1 Connect the base power supply into the power jack on

the charger base.

2 Connect the power supply to the outlet. The power
indicator light will be solid green.
Important NOTE For best performance it is recommended that Windows is updated with Service Pack levels listed below: Microsoft Windows XP-Service Pack 3 (SP3) or later Microsoft Windows Vista-Service Pack 1 (SP1) or later

2.3 Fitting Headset

The headset comes with a pre-installed earloop and ear tab. An optional headband is also provided.
5The ear tab has been designed to maximize stability of
the headset. It can be rotated on the headset to optimize its fit and comfort in the ear. If desired, the ear tab can be removed by pulling tab from the headset.
1To install the headband, gently unsnap the pre-installed

earloop from the headset.
2 Snap the headband into the headset. The headband can

be adjusted to fit.

3 For either wearing option rotate the headset until the
microphone is pointed toward your mouth.
4The headset can be converted for wearing on the left or
right ear with both earloop and headband. Ear Tab Earloop

Headset Snap Headband

2.4 Docking and Charging Headset
1 Gently push the headset into the charge cradle.
The indicator light on the headset will be solid red to indicate that the headset battery is charging
2 Charge for at least 20 minutes prior to the first use.
A full charge takes 3 hours.

Charging time 20 min..

Minimum charge before first use

3 hours..

Full charge

Power Indicator Light

Note The USB charging cable can also be used to charge the headset. To successfully charge your headset with the USB cable the PC must be on and in active state (not standby). The charging time will vary according to the number of other devices drawing power from the PCs USB port(s).

3 Test Call

3.1 Making a Test Call Using Microsoft Office Communicator
1 Ensure Microsoft Office Communicator is running on

your PC.

2 Set the headset and microphone volume to a
comfortable level using the Microsoft Office Communicator Set up Audio and Video page.*
3 Place a test call using Microsoft Office Communicator. 4 Adjust the receive and listen volume to comfortable
levels using the volume control in the Conversation Window.*
5 You can also fine tune the listening volume on the
headset by pushing the call control button up to increase the volume and pushing down to decrease the volume.
NOTE Do not press the call control button in when adjusting the volume otherwise the call can be ended accidentally.
6 To end the test call, press the call control button on the
headset. For your safety, do not use headset at high volumes for extended periods of time. Doing so can cause hearing loss. Always listen at moderate levels. For more information on headsets and hearing visit: www.plantronics.com/healthandsafety.

* Consult Microsoft Office Communicator Help for more information.
4 Using Your Headset System with Microsoft Office Communicator

Powering Headset On/Off

The headset will be ready to use once it has been charged in the charger base as described in Section 2.4 Docking and Charging the Headset. To conserve power you may optionally power the headset off, by pressing and holding the call control button for six seconds. The headset indicator light will be lit red for four seconds to confirm that the headset is powered off. Note once powered off you will not be able to use the headset. To power the headset back on press and hold the call control button for four seconds when the headset indicator will light blue for two seconds, then flash red a number of times to indicate the remaining battery charge (see Checking the Battery Level). Indicator Light

Call Control Button

Placing, Answering, and Ending Calls with Microsoft Office Communicator
To place a call To answer a call on the headset To answer a call when already on an active call on your mobile phone To end a call on the headset Dial number using Microsoft Office Communicator* Short press call control button on headset Short press the call control button once to end the mobile phone call then press again to answer your Microsoft Office Communicator call Short press call control button on headset
*Consult Microsoft Office Communicator Help for more information on how to place a call. Note You can also answer calls directly from Microsoft Office Communicator by clicking on the Call Alert that appears on your PC screen. In this case the call will be directed to the default speakerphone which may not be your headset. Consult Microsoft Office Communicator Help for more information.

Muting a Headset Call

To mute a call, press and hold the call control button down (in the volume down position) for two seconds. You will hear a low/high tone pair indicating the mute is activated. To unmute a call, push and hold the call control button down (in the volume down position) for two seconds. You will hear a high/ low tone pair indicating the mute is deactivated. Volume Down Button
USB Adapter Indicator Light
USB Adapter Status Headset in talk mode Base and headset pairing Indicator Light Flashes blue Flashes red and blue
Headset Indicator Lights and Tones
Headset Status Headset charging Headset fully charged Headset battery low Headset ready Incoming call Active call Headset Indicator Light Solid red Off Flashes double red Slow blue flash (every 10 sec.) Flashes purple Flashes blue

Out of Range Warning

If you are on a call you will hear the audio degrade as you move out of range. If you stay out of range, active calls will be suspended. Calls will be re-established upon walking back into range.
Pairing Headset to USB Adapter
The headset and USB adapter are supplied paired to each other. However, if you wish to use a replacement headset with your existing USB adapter, the units can be paired to each other by the following method:
1 Ensure your replacement headset is fully charged.

Low Battery Warning

A repeating high/low tone pair every 10 seconds indicates the battery is low. You should recharge the headset immediately.
2 Power the headset off by pressing and holding the call
control button for six seconds. The headset indicator light will be red for four seconds.
3 Place the headset in pairing mode by pressing and
holding the call control button until the indicator light flashes red and blue.

Checking Battery Level

You can check the battery level by moving the call control button to the volume down position, then pressing inwards and holding for two seconds. The headset indicator will flash red to indicate the remaining battery charge level. One red flash = low charge level Two red flashes = medium charge level Three red flashes = high charge level
4 Place the USB adapter in pairing mode by pressing
and holding the pairing button on the adapter for two seconds. The pairing light will flash red and blue.
5 When the pairing light on the USB adapter goes solid
blue, the headset and the USB adapter are paired.
Turning Headset Indicator Blue Flash On/Off
By default the headset indicator flashes blue to indicate the headset state as described in the section Headset Indicator Lights and Tones. This feature may be disabled by moving the call control button to the volume up position, then pressing inwards and holding for two seconds. The headset indicator will show a short burst of blue flashes. Repeat this operation to turn the headset blue flashing indicator back on.

NOTE Take caution pairing the USB adapter. Do not press hard. Please press with both fingers rather than push on the USB adapter to avoid damage to the USB adapter or USB port.

Mute Warning

When mute is activated, you will hear a single low tone which will repeat every 30 seconds.
5 Using Your Headset with your Bluetooth Mobile Phone
Pairing your Headset to your Bluetooth Mobile Phone
1Turn on your mobile phone and enable Bluetooth. For
most phones select Settings>Tools>Connections> Bluetooth>On. See your phones user guide for more information.
4 Use the commands on your phone to locate the headset.
For most phones select Settings>Tools>Connections> Bluetooth>Search>Savi Go WH100. See your phones user guide for more information.
5 When prompted for a passkey, enter 0000 (4 zeros). The
headset indicator light will flash blue when paired successfully. Note For detailed pairing instructions for popular mobile phones visit: www.plantronics.com/easytopair.
3 Press and hold the headset call control button for six
seconds or until the red and blue indicator lights flash alternately. Note The headset will stay in pairing mode for three minutes.
Placing, Answering, and Ending Calls with your Headset and Bluetooth Mobile Phone
To place a call To answer a call To answer a call when already on an active Microsoft Office Communicator call To end a call Redial last number* Dial number on your mobile phone keypad. Short press call control button. Short press the call control button to end the Microsoft Office Communicator call, then press again to answer your mobile phone call. Short press call control button. Double tap call control button. There will be a high tone on each press. A final tone indicates the last number has been redialed. Press and hold call control button for two seconds. First tone on key press start followed by a second tone which indicates voice dial is activated. Press and hold call control button until you hear two tones. Press and hold call control button for two seconds until you hear a long tone.

Activate voice dialing*

Reject a call Transfer a call from your mobile phone to your headset Transfer a call from your headset to your mobile phone
Press and hold call control button for two seconds until you hear a long tone.

* Only available on mobile phones and carriers that support these features.
6 Troubleshooting and Common Questions
Troubleshooting Microsoft Office Communicator Usage
My headset doesnt work with Microsoft Office Communicator.
Make sure your headset is charged. Make sure your headset is on and connected. Press the call control button on your headset. Fine tune the listening volume with the call control button. If the volume is still too low, adjust the listening volume on the PC using Microsoft Office Communicator*.
The sound is distorted or I hear an echo in the headset.
Reduce speaking volume on the PC using Microsoft Office Communicator*. Point microphone towards your chin. If the distortion is still present, lower the volume using the call control button.
While on an Microsoft Office Communicator call I want to accept a call from my mobile phone. Reconnecting the Bluetooth link between your headset and USB adapter. Talk time performance is significantly degraded even after a full recharge.
Press the call control button for less than 1 second (this will disconnect the Microsoft Office Communicator call.) Press the call control button again to connect with your mobile phone.
If you turn on the headset beyond Bluetooth range, and then return within it, you may need to reestablish the Bluetooth link by pressing the USB adapter button.
Battery is wearing out. Contact www.plantronics.com/support for factory service information.
* Consult Microsoft Office Communicator Help for more information
Troubleshooting Mobile Phone Usage
My headset does not work with my phone. Make sure the headset is fully charged. Make sure headset is paired with the Bluetooth phone you are trying to use. See Pairing Your Headset to your Bluetooth Mobile Phone on page 12.
My phone did not locate the headset.
Turn both your phone and headset off and on, and then repeat the pairing process on page 12.
I could not enter my PIN code.
Turn both your phone and headset off and on, and then repeat the pairing process on page 12. Your PIN code, or Passkey, is 0000.

I cannot hear caller/dial tone.
The headset is not turned on. Press the call control button for approximately 4 seconds until you hear a tone or see the indicator glow blue. Your headset is out of range. Move the headset closer to the Bluetooth phone. Your headset battery is drained. Charge your battery. See Docking and Charging Headset on page 7. The listening volume is too low. Incremental tapping of the call control button will adjust volume. Make sure that the headset fits properly. See Fitting Headset on page 7.

Audio quality is poor.

Your headset is out of range. Move the headset closer to the Bluetooth phone.

Callers cannot hear me.

Make sure that headset is sitting correctly in ear with boom pointing towards corner of mouth. See Fitting Headset on page 7.
My headset falls off my ear.
Make sure that Headset is sitting correctly on your ear with boom pointing towards corner of mouth. See Fitting Headset on page 7.
Plantronics, Inc. 345 Encinal Street Santa Cruz, CA 95060 United States www.plantronics.com For product support contact us at www.plantronics.com/support.
2009 Plantronics, Inc. All rights reserved. Plantronics, the logo design, Savi, and Sound Innovation are trademarks or registered trademarks of Plantronics, Inc. Microsoft, Windows and Vista are trademarks or registered trademarks of Microsoft Corporation. The Bluetooth word mark is owned by Bluetooth SIG, Inc. and any use of the mark by Plantronics is under license. Patents US 5,210,791; Patents Pending. 81668-01 (02.09)

PLANTRONICS

Unify PC and mobile communications
Designed for mobile professionals in the office, the Plantronics Savi Go headset system with multipoint technology lets you seamlessly switch between calls received on your PC and those received on your mobile phone. Incorporating wideband audio that sharpens PC voice transmissions and streaming audio, the Bluetooth enabled Savi Go headset features a noise-canceling microphone and ergonomically designed wearing style that maximize your comfort and productivity throughout the day.

Savi Go Benefits

Seamless communication. Multipoint technology allows you to manage calls from both your PC and your mobile phone using a single headset every way and everywhere you need to connect. Robust audio. Wideband PC audio delivers rich, life-like fidelity, while extended boom and noise-canceling microphone heighten speech clarity. Simple call control. A single button lets you control call answer/end, volume and mute. Call alert notifies you of incoming calls while youre listening to streaming audio. Savi Go includes Plantronics PerSono Suite software for feature setting capabilities and selected softphone call control. Wireless mobility. New Class 1 Bluetooth range accommodates your mobile work style up to 210 feet from your PC. Savi Go offers the Convertible wearing style with easy-fit earloop or adjustable headband offers all-day wearing comfort. The Convertible comes with an extended boom with noise-canceling microphone providing best-class audio for in-office mobile professionals.

Savi Go Headset Features

Operating Frequency Wearing Styles Digital Encryption DSP (Digital Signal Processing) PC Wideband Audio Range Headset Weight Headset Controls Dual Connection Switch Calls Adaptive Battery Power Battery-Enabled Talk Time Microphone Style Remote Ring Notification Single-Button Call Control Bluetooth version 2.1: 2.4 GHz Convertible: over-the-head or over-the-ear 128-bit Yes Yes Up to 210 feet with Class 1 range 25 grams Volume, mute, call answer/end PC and mobile phone Answer whichever device is ringing Optimizes energy consumption Up to 6 hours, 60 hours standby Noise-canceling Yes Yes
Choose your version of savi go
Optimized for Microsoft Office Communicator (OCS) 2007 version designed to provide all your call control with OCS.

Savi Go WG101/B

Unified Communcations standard version built for UC applications and softphones from Cisco, Microsoft, IBM, Avaya and more. Check www.plantronics.com\personosuite for the latest list of softphones supported.

Savi Go WG100/B

Convertible headset with earloop and USB dongle
Convertible headset with over-the-head snap-on headband
For more information about Savi Go or other Plantronics products, please visit our Web site at www.plantronics.com/saviseries TEL:866-979-SAVI (USA AND CANADA) 831-426-5858 (OUTSIDE USA)
2009 Plantronics, Inc. All rights reserved. Plantronics, the logo design, PerSono, Savi and Sound Innovation are trademarks or registered trademarks of Plantronics, Inc. Avaya is a trademark of Avaya, Inc. and may be registered in certain jurisdictions. The Bluetooth name and the Bluetooth trademarks are owned by Bluetooth SIG, Inc., and are used by Plantronics, Inc., under license. Cisco is a registered trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. IBM is a trademark of International Business Machines Corporation in the United States, other countries or both. Microsoft is a trademark or registered trademark of Microsoft Corporation in the US and other countries. All other trademarks are the property of their respective owners. Published 11.09