CARE AND MAINTENANCE....48
10. LIMITED POLAR INTERNATIONAL GUARANTEE.....56 11. POLAR DISCLAIMER.....57 12. INDEX......58
1. INTRODUCTION TO THE RS100 RUNNING COMPUTER

Dear customer,

Congratulations on your purchase of a new Polar RS100 Running Computer! Your running computer helps you achieve your exercise goals. It provides feedback on your bodys response to exercise. The following tasks can be performed with the running computer:

1.1 PRODUCT ELEMENTS

The Polar RS100 Running Computer package consists of the following parts:

Polar Web Services

www.PolarRunningCoach.com is a complete web service tailored to support your exercise goals. Free registration gives you access to the personalized training program, training diary, useful articles and much more. In addition, you can get latest product tips and support online at www.polar.

Wrist Unit Planning

Base your training and various exercise sessions on heart rate.

Adapting to environment

Your heart rate responds to internal and external factors acting on your body (for example, stress, lack of sleep, altitude and temperature). Using your running computer will help ensure a quality workout in varying conditions. Read this manual carefully to familiarize yourself with your running computer. This manual also contains a section about maintenance. Have success and fun using your running computer!
Setting pace and controlling intensity
Your heart rate is an accurate measure of exercise intensity - it tells you how hard you are working. Use heart rate to set a pace that you are able to maintain.
The wrist unit displays and records your heart rate and exercise data during exercise. Enter your personal settings into the wrist unit and analyze exercise information after your workouts.
Customer Service, Registration and International Guarantee Information
If your running computer needs repair, send it with the Return Card for service to your Polar Service Center. By completing the Customer Registration Card you help us ensure the quality of customer support and the development of future Polar products and services. The Polar two-year guarantee is issued to the original customer/purchaser of the product. Keep the International Guarantee Card as your proof of purchase.

Polar Coded Transmitter

The transmitter sends your heart rate signal to the wrist unit. The electrode areas on the back of the transmitter detect your heart rate.

Keeping safe

Monitor your heart rate during exercise to keep yourself from pushing too hard or overtraining.

Checking progress

Your heart rate allows you to objectively measure improvements in your tness level. For a particular speed and time/distance, your heart rate should decrease with improvements in your tness.

Elastic Strap

The elastic strap holds the transmitter around your chest.
1.2 USING YOUR POLAR RS100 FOR THE FIRST TIME
Enter your settings in the Basic Settings mode (time, date, units and personal settings).
The display reads: 3. Time Set 12h / 24h AM / PM (for 12h format) Hours Minutes

to set

Press the Red button to accept
How to enter the Basic Settings
Entering accurate personal information ensures that you receive correct feedback based on your performance (calorie consumption, OwnZone determination etc). Activate the wrist unit by pressing any button. The wrist unit cannot be turned off once activated. The display lls with numbers and letters. 1. Press the Red button. Settings is displayed. 2. Continue by pressing the Red button and follow the steps on next page:
Note: The numbers scroll faster if you press and hold the or button as you adjust the value. After a change of battery or after you reset the wrist unit, you only need to set the time and date in Basic Settings. You can skip the rest of the settings by pressing and holding the Stop button. Tip: You can design and download logos to the display using the Polar UpLink Tool. Download UpLink Tool free of charge at www.polar. or www.PolarRunningCoach.com. For further information, see page 47.
/ select 12h or 24h format / select AM or PM / adjust the hours / adjust the minutes
Red button Red button Red button Red button
Note: The date will be displayed according to the time format selected (24h: day - month - year / 12h: month - day - year). 4. Date Set Day / Month Month / Day Year / adjust the day (in 24h format) or the month (in 12h format) / adjust the month (in 24h format) or the day (in 12h format) / adjust the year Red button

Red button

The display reads: 5. Unit Unit 1 (kg/cm) / Unit 2 (lb/ft) 6. Weight kg / lbs
The display reads: 9. Sex MALE / FEMALE
/ select the units / adjust your weight

/ select sex

Settings done is displayed. To change your settings, press the Stop button until you return to the desired setting. To accept settings, press the Red button or wait until the display automatically goes to Time mode.

Note: If you have not set your personal settings in Basic Settings, calories are not shown and the calories display is skipped.

ENG ENG

Storing lap and split time: Press the Red button to store lap and split time. Lap time Average heart rate of the lap (AVG) Number of the lap Split time Average heart rate of the lap (AVG) Number of the lap
2.4 STOPPING THE EXERCISE AND VIEWING SUMMARY FILE
1. Press the Stop button to pause the exercise recording. Paused and the Standby symbol are displayed. 2. Press the Stop button. Summary FILE is displayed and the following information starts scrolling: Duration (total exercise time) HR avg (average heart rate) Limits (upper and lower limits of your target zone; if limits are set) In Zone (time spent in your target zone; if limits are set) Cal / Fat% (accumulated calories burnt during exercise/fat percentage of burnt calories) The wrist unit returns automatically to Time mode after scrolling through the summary le.
Note: The alternating information switches automatically on the display. Alternate the information manually by pressing the Red button or stop the review by pressing the Stop button. Detailed exercise information is placed in the File mode.
Lap time indicates elapsed time for one lap. Split time is elapsed time from the beginning of the exercise until storing a lap time (for example from the beginning of the exercise until the 4th lap was stored).
Note: If the maximum amount of laps (99) is stored, Lap Time FULL text will be displayed. If maximum le recording time (99 hours 59 min 59 s) is exceeded, the wrist unit beeps, pauses recording and displays HALT.
Pausing exercise: Press the Stop button. Exercise recording, stopwatch and other calculations are paused. You can view the upper row information by pressing. To continue, press the Red button. Exercising in the dark: If you activate the backlight by pressing the Light button during an exercise recording, the backlight will reactivate automatically during the same exercise every time you press any button or use the Heart Touch function. Keylock : Press and hold the Light button to lock or unlock all buttons, except the Light button. Locked or Unlocked is displayed. Keylock is useful when engaging sports where you might get accidental button press.
3. VIEWING RECORDED INFORMATION - FILE
Recorded exercise le information
The exercise File allows you to review heart rate and exercise information collected while recording an exercise session. Your exercise information is saved only if the stopwatch has been on for more than one minute or one lap has been restored. 1. In the Time mode, press. File is displayed. 2. Press the Red button. Date and Time alternate on the display. 3. Press / to browse through the recorded information.
Press Red button Recorded exercise le information Time / Date

Total values Press Red button Tot.Time The date cumulation started* Total cumulative exercise duration starting at previous reset
The date cumulation started* Total cumulative exercise count starting at previous reset
Reset all Total values. For further information, see page 26.

Tot.Cal

Tot.Count
* If no Total values are accumulated yet, the reset date is displayed. * If no Total values are accumulated yet, the reset date is displayed.

ResetAll ?

To exit Total values, press the Stop button. To return to Time mode, press and hold the Stop button.
Note: When the Total values memory become full, the accumulation starts from the 0 again.

5. SETTINGS

4.2 RESETTING TOTAL VALUES
Use Total values as a seasonal (or weekly/monthly) counter of your exercise values by resetting them once a season. Once reset, a value cannot be retrieved. You can reset one particular value or all values at once (ResetAll?). Start with any display in the previous table (Tot.Time, Tot.Cal, Tot.Count, or ResetAll?). 1. Press the Red button to start resetting the desired value. Reset? is displayed. 2. Press the Red button. Are You Sure is displayed. 3. If sure, press the Red button.
You can view or change the settings in the Settings menu. To set values: Select or adjust using or. The numbers scroll faster if you press and hold or while adjusting values. Accept your selection and go deeper in the menu with the Red button. Cancel your selection or return to the previous mode or menu by pressing Stop.
Tip: Learn how your training can benet from your running computers features by consulting the running and training tips at www.PolarRunningCoach.com.
Alternatively, to cancel the reset, press the Stop button. To return to Time mode, press and hold the Stop button.

5.1 TIMER SETTINGS

Running intervals is an important part of developing your running performance. Your running computer is equipped with two alternating timers, allowing you to set one repeating or two different alternating time intervals.

The display reads: 5. OwnZone / Manual / Off LIM Press or to set Press the Red button to accept Red button
Determining Your OwnZone Heart Rate Limits
Before you start to determine your OwnZone, make sure that: You entered your user settings correctly. The wrist unit will ask for missing information (for example date of birth) before accepting limit settings. You activate the OwnZone limits. With the function on, the wrist unit will automatically determine your OwnZone everytime you start recording an exercise session. You should redene your OwnZone: When changing your exercise environment or exercise mode. If you feel unusual about the physical state of your body when starting to exercise. For example you are stressed or not feeling well. The main idea is that you start your exercise with a warm-up period at a light intensity i.e. heart rate lower than 100 bpm/ 50% HRmax. You then gradually increase the intensity of your exercise to raise your heart rate.
/ select OwnZone limits / select heart rate format: beats per minute or % of your maximum heart rate

6. HR / HR %

To return to Time mode, press and hold the Stop button.
Tip: See www.PolarRunningCoach.com for heart rate based Polar Training Programs.
1. Start your exercise as described in the section Exercise Recording on page 14. 2. OwnZone determination begins and the OwnZone symbol appears in the upper row of the display. Alternatively, to skip OwnZone determination and use the previously determined OwnZone, press the Red button. Determination of your OwnZone happens in ve stages. Walk at a slow pace for 1 min. Keep your heart rate below 100 bpm/ 50% HRmax during this rst stage. After each stage you will hear a beep (if the sound settings are on) and the display automatically illuminates (if you have switched the backlight on once before), indicating the end of the stage. Walk at a normal pace for 1 min. Slowly increase your heart rate by 10-20 bpm/ 5% HRmax. Walk at a brisk pace for 1 min. Slowly increase your heart rate by 10-20 bpm/ 5 % HRmax. Jog at a slow pace for 1 min. Slowly increase your heart rate by 10-20 bpm/ 5% HRmax. Jog at brisk pace or run for 1 min. 3. At some point during the ve stages you will hear two beeps. Your OwnZone has now been determined and you can begin your planned exercise session. The OwnZone determination method (see the table on the next page) and OwnZone heart rate limits are displayed. The limits are displayed as beats per minute (bpm) or as a percentage of your maximum heart rate (%HR) depending on your settings.
The display reads: OwnZone If not successful, then OZ latest
OwnZone determination method heart rate variability
Reasons for using this method
previous OwnZone based on heart rate variability
your heart rate variability decreased either too slowly or too fast or your heart rate exceeded the safety limit of the OwnZone determination

Tip: For further information on target zones and for a personalized training program, see www.PolarRunningCoach.com.

7. HighLimit

8. LowLimit
The table below contains target heart rate zones in beats per minute (bpm) estimated by age in 5-year intervals. Calculate your own HRmax, write down your own target heart rate zones and select the ones suitable for your training.
Age HRmax 50-60% of HRmax 100-120 98-117 95-114 93-111 90-108 88-105 85-102 83-99 80-96 78-93 60-70% of HRmax 120-140 117-137 114-133 111-130 108-126 105-123 102-119 99-116 96-112 93-109 70-80% of HRmax 140-160 137-156 133-152 130-148 126-144 123-140 119-136 116-132 112-128 109-124 80-90% of HRmax 160-180 156-176 152-171 148-167 144-162 140-158 136-153 132-149 128-144 124-140 90-100% of HRmax 180-200 176-195 171-190 167-185 162-180 158-175 153-170 149-165 144-160 140-155
5.2.3 DEACTIVATE TARGET ZONE LIMITS Deactivate target heart rate zone limits so no limits are used during exercise and no limit values are calculated in the File. (See steps 1-4 on page 29.)

/ select Off

5.3 WATCH SETTINGS
5.3.1 ALARM 1. In Time mode, press. Settings is displayed. 2. Press the Red button. Timer SET is displayed. 3. Press / until Watch SET is displayed. 4. Continue by pressing the Red button and follow the steps below:
The display reads: 5. Alarm Once / Mon-Fri / Daily / Off 6. AM / PM (for 12h format) Press or to set Press the Red button to accept Red button (Skip step 6 for 24h format) Red button
The Alarm functions in all modes. When the Alarm sounds, Alarm! with a ashing backlight is displayed. The alarm will sound for a minute unless you press the Stop button. To delay the alarm an extra 10 minutes, press the , or the Red button: Snooze is displayed. The alarm will sound again after 10 minutes. To cancel the snooze and Alarm, press the Stop button in Snooze mode. Alternatively, you can quick access Alarm settings in Time mode by pressing and holding the Stop button.
Note: If the battery low symbol before the symbol appears. appears in the display, the Alarm cannot be activated. However, the Watch Alarm will work once if it is set
/ select Alarm mode / select AM or PM / adjust the hours / adjust the minutes

7. Hours

8. Minutes
To return to the Time mode, press and hold the Stop button.
5.3.2 TIME SETTING 1. In Time mode, press. Settings is displayed. 2. Press the Red button. Timer SET is displayed. 3. Press / until Watch SET is displayed. 4. Continue by pressing the Red button until TIME is displayed and follow the steps below:
The display reads: 5. Time 12h / 24h 6. AM / PM (for 12h format) Press or to set Press the Red button to accept Red button (Skip step 6 for 24h format) Red button
5.3.3 DATE SETTING 1. In Time mode, press. Settings is displayed. 2. Press the Red button. Timer SET is displayed. 3. Press / until Watch SET is displayed. 4. Continue by pressing the Red button until Date is displayed and follow the steps below:
Note: The order for setting the date depends on the time format selected (24h: day - month - year / 12h: month - day - year). The display reads: 5. Day / Month Press or to set Press the Red button to accept Red button
/ adjust the day (in 24h format) or the month (in 12h format) / adjust the month (in 24h format) or the day (in 12h format) / adjust the year

6. Month / Day

Red button 7. Year
To return to Time mode, press and hold the Stop button. To return to Time mode, press and hold the Stop button.

5.4 USER SETTINGS

Entering correct personal information ensures that your calorie counter operates with the highest possible degree of accuracy. 1. 2. 3. 4. In the Time mode, press. Settings is displayed. Press the Red button until Timer SET is displayed. Press / until User SET is displayed. Press the Red button to specify the user information settings and follow the steps below:
Press or to set Press the Red button to accept Red button
The display reads: 7. Birthday Day / Month

Month / Day

The display reads: 5. Weight kg / lbs

/ adjust your weight

8. Sex MALE / FEMALE
Note: The weight and height units depend on your choice in the Units settings. If you previously chose the wrong units, change them in weight and height setting mode by pressing and holding the Light button. To change your settings, press Stop and return to step 4. 6. Height cm / ft inch (for Unit 2) / adjust your height / Red button Red button

/ select gender

The display reads: 9. HR Max
Press the Red button to accept Red button

5.5 GENERAL SETTINGS

You can view and change the following settings in the General Settings mode: sound On or Off unit format (kg/cm or lb/ft) 5.5.1 SOUND SETTING Sound settings include the button sound and Stopwatch sounds. Sound settings do not affect the watch alarms. 1. 2. 3. 4. In Time mode, press. Settings is displayed. Press the Red button until Timer SET is displayed. Press / until General SET is displayed. Press the Red button and follow the steps below:

Taking Care of Your Running Computer
Store your wrist unit and transmitter in a cool and dry place. Do not store them in a damp environment, in non-breathable material (such as a plastic bag or a sports bag) or with conductive material such as a wet towel. Sweat and moisture can keep the transmitter electrodes wet and the transmitter activated, shortening battery life. Keep your unit clean. Clean it with a mild soap and water solution. Dry it carefully with a soft towel. Never use alcohol or any abrasive material such as steel wool or cleaning chemicals. The operating temperatures are -10 C to +50 C / +14 F to +122 F. Do not expose the running computer to direct sunlight for extended periods, such as by leaving it in a car. Do not bend or stretch the transmitter. This may damage the electrodes. Do not dry the transmitter in any other way than with a towel. Mishandling may damage the electrodes.

Transmitter Battery

Contact your authorized Polar Service Center for a replacement transmitter. Polar recycles used transmitters. See your Customer Care and Registration Card for detailed instructions.

Wrist Unit Battery

The estimated average battery life of the wrist unit is two years in normal use (1h/day, 7 days/week). Excessive use of the backlight drains the wrist units battery more rapidly. The low battery indicator is displayed when 10-15% of the wrist unit battery capacity is left and the battery should be replaced. Do not open the wrist unit yourself. To ensure water resistance properties and the use of qualied components, the wrist unit battery should be replaced by an authorized Polar Service Center only. At the same time, a full periodic check of the running computer will be done.
Note: is displayed. However, the Watch Alarm sound works once, The backlight and wrist unit sounds are automatically deactivated when symbol appears. The Alarm symbol will also disappear from the display. if you have activated the Watch Alarm before the may appear, but the indicator disappears when you return to a normal temperature. In cold conditions the low battery indicator Water resistance cannot be guaranteed after unauthorized service. After a battery change re-enter time and date settings in Basic Settings. For further information, see page 8.

7. PRECAUTIONS

INTERFERENCE DURING EXERCISE Electromagnetic Interference Disturbances may occur near high voltage power lines, trafc lights, overhead lines of electric railways, electric bus lines or trams, televisions, car motors, bike computers, some motor driven exercise equipment, cell phones, or when you walk through electric security gates. Exercise Equipment Several pieces of exercise equipment with electronic or electrical components such as LED displays, motors, and electrical brakes may cause interfering stray signals. To tackle these problems, try the following: 1. Remove the transmitter from your chest and use the exercise equipment as you would normally. 2. Move the wrist unit around until you nd an area in which it displays no stray reading or does not ash the heart symbol. Interference is often worst right in front of the display panel of the equipment, while the left or right side of the display is relatively free of disturbance. 3. Put the transmitter back on your chest and keep the wrist unit in this interference-free area as much as possible. 4. If the running computer still does not work with the exercise equipment, this piece of equipment may be electrically too noisy for wireless heart rate measurement. Crosstalk the wrist unit picks up transmitter When in non-coded mode signals within 3 feet/1 meter. Simultaneous non-coded signals from more than one transmitter can cause an incorrect readout. Using the Polar Running Computer in a Water Environment Your running computer is water resistant and can be worn when swimming. The running computer is not, however, a diving instrument. To maintain water resistance, do not press the buttons of the wrist unit under water. When measuring heart rate in water you may experience interference for the following reasons: Pool water with high chlorine content and seawater are very conductive. The electrodes of a transmitter may short-circuit, preventing ECG signals from being detected by the transmitter. Jumping into water or a strenuous muscle movement during competitive swimming may cause water resistance that shifts the transmitter to a location on the body where it ECG signals cannot be picked up. The ECG signal strength depends on the individual, and varies depending on the individuals tissue composition. The occurrence of problems when measuring heart rate is considerably higher in water. Minimizing Possible Risks When Exercising Exercise may include some risk. Before beginning a regular exercise program, it is recommended that you answer the following questions concerning your health status. If you answer yes to any of these questions, we recommend that you consult a doctor before starting any training program. Have you been physically inactive for the past 5 years? Do you have high blood pressure or high blood cholesterol? Do you have symptoms of any disease? Are you taking any blood pressure or heart medication? Do you have a history of breathing problems? Are you recovering from a serious illness or medical treatment? Do you use a pacemaker or another implanted electronic device? Do you smoke? Are you pregnant? Notice to individuals with pacemakers, debrillators or other implanted electronic devices. Individuals who have a pacemaker use the Polar Running Computer at their own risk. Before starting use, we always recommend a maximal exercise stress test under a doctors supervision. The test is to ensure the safety and reliability of the simultaneous use of the pacemaker and the Polar Running Computer. If you are allergic to any substance that comes into contact with your skin or if you suspect an allergic reaction due to using the product, check the listed materials on page 55. To avoid any skin reaction to the transmitter, wear it over a shirt. However, moisten the shirt well under the electrodes to ensure awless operation. The combined impact of moisture and intense abrasion may cause a black color to come off the transmitters surface, which might stain light-colored clothes.

Note that in addition to exercise intensity, medications for heart, blood pressure, psychological conditions, asthma, breathing etc. as well as some energy drinks, alcohol and nicotine may affect your heart rate. It is important to be sensitive to your bodys responses during exercise. If you feel unexpected pain or excessive fatigue when exercising, it is recommended that you stop the exercise or continue at a lighter intensity.
8. FREQUENTLY ASKED QUESTIONS
What should I do if if I do not know where I am in the menu? Press and hold the Stop button until the time of day is displayed. there are no reactions to any buttons? Reset the wrist unit by pressing the four side buttons simultaneously for two seconds. Set the time and date in the Basic Setting after the reset. Other settings are saved. the heart rate reading becomes erratic or extremely high? Strong electromagnetic signals can cause erratic readings. So move away from possible sources of disturbance such as high-voltage power lines, trafc lights, overhead lines of electric railways or trams, car motors, bike computers, some motor-driven exercise equipment (like tness testers) or cell phones. If moving away does not help and the heart rate reading remains erratic, slow down your speed and check your pulse manually. If you feel it corresponds to the high reading on the display, you may be experiencing cardiac arrhythmia. Most cases of arrhythmia are not serious, but consult your doctor nevertheless. the heart symbol ashes irregularly? Check that your wrist unit is not further than 1 m/3 ft from the transmitter. Check that the transmitter has not become loose during exercise. Make sure that the electrodes of the transmitter are moistened. Make sure that there is no other heart rate transmitter within 1 m/3 ft. Cardiac arrhythmia may cause irregular readings. In this case, consult your physician. there is no heart rate reading (- -)? Check that the electrodes of the transmitter are moistened and that you are wearing it as instructed. Make sure the transmitter is clean. Check that you are not near high voltage power lines, televisions, cell phones or other sources of electromagnetic interference. Also make sure that you are not near (1 m/3 ft) other heart rate monitor users, when starting you exercise recording. A cardiac event may have altered your ECG waveform. In this case, consult your physician. another person with a running computer or a heart rate monitor is causing interference? Move away from that person and continue your exercise normally. Alternatively, 1. Take the transmitter off your chest for 30 seconds. Stay away from the person with the other device. 2. Put the transmitter back on and bring the wrist unit up to your chest near the transmitters Polar logo. The wrist unit will start looking for a heart rate signal again. Continue your exercise normally. appears? the low battery symbol Usually the rst sign of an expired battery is the low battery indicator on the display. For further information, see page 49. Note: Due to cold conditions the low battery indicator may appear, but the indicator disappears when you return to a normal temperature. the display is blank? The running computer is in battery saving mode when it is dispatched from the factory. To activate it, press the Red button twice. The Basic Settings starts. For further information, see page 8. Alternatively the battery may be dead (see the next question for further instructions). the battery of the wrist unit must be replaced? We recommend having all service done by an authorized Polar Service Center. This is especially necessary to ensure that the guarantee remains valid and is not affected by incorrect repair procedures performed by an unauthorized agent. Polar Service will test your wrist unit for water resistance after battery replacement and make a full periodic check of the complete running computer set.

9. TECHNICAL SPECIFICATIONS
The Polar Running Computer displays your performance indicators and helps you achieve your personal training goals. It indicates the level of physiological strain and intensity during your exercise. No other use is intended or implied. Water resistance of Polar products is tested according to International Standard ISO 2281. Products are divided into three different categories according to their water resistance. Check the water resistance category of your Polar product from the chart below. Please note that these denitions do not necessarily apply to products of other manufacturers. WRIST UNIT Battery life: Average 2 years normal use (1h/day, 7 days/week) Battery type: CR 2032 Operating temperature: -10 C to +50 C / +14 F to +122 F Wrist strap material: Polyurethane Back cover and Wrist strap buckle material: Stainless steel complying with the EU Directive 94/27/EU and its amendment 1999/C 205/05 on the release of nickel from products intended to come into direct and prolonged contact with the skin. Water resistant 50m Watch Accuracy: Heart Rate Monitor Accuracy: 1% or 1 bpm, whichever larger, denition applies to steady state conditions. 15-240
Heart rate measuring range:
Marking on the case back Water resistant Water resistant 50m
Wash splashes, sweat, raindrops etc. X X

Bathing and swimming

Skin diving with snorkel (no air tanks)
SCUBA diving (with air tanks)
Water resistant characteristics Splashes, sweat, raindrops etc.
File 1 exercise le Maximum time recorded to le: 99 h 59 min 59 s Totals Maximum Tot.Time: Maximum Tot.Cal: Maximum Tot.Count:
Minimum for bathing and swimming X For frequent use in water but no SCUBA diving
better than 0.5 seconds / day at 25 C / 77 F temperature.

9999 h 999 999

Water resistant 100m
TRANSMITTER Battery life: Battery type: Operating temperature: Transmitter Material: Waterproof Elastic strap Buckle material: Fabric material:
Average 2500 hours of use Built-in Lithium Cell -10 C to +50 C / 14 F to 122 F Polyurethane
Polyurethane Nylon, polyester, and natural rubber including a small amount of latex
10. LIMITED POLAR INTERNATIONAL GUARANTEE

This limited Polar international guarantee is issued by Polar Electro Inc. for the consumers who have purchased this product in the USA or Canada. This limited Polar international guarantee is issued by Polar Electro Oy for the consumers who have purchased this product in other countries. Polar Electro Oy/Polar Electro Inc. guarantees to the original consumer/purchaser of this device that the product will be free from defects in material or workmanship for two years from the date of purchase. Please keep the receipt or International Guarantee Card. This is your proof of purchase! The guarantee does not cover the battery, damage due to misuse, abuse, accidents or non-compliance with the precautions; improper maintenance, commercial use, cracked or broken cases and elastic strap. Guarantee does not cover any damage/s, losses, costs or expenses, direct, indirect or incidental, consequential or special, arising out of, or related to the product. During the guarantee period the product will be either repaired or replaced at an authorized Service Center free of charge. This guarantee does not affect the consumers statutory rights under applicable national or state laws in force, or the consumers rights against the dealer arising from their sales/purchase contract.

11. POLAR DISCLAIMER

The material in this manual is for informational purposes only. The products it describes are subject to change without prior notice, due to the manufacturers continuous development program. Polar Electro Inc./Polar Electro Oy makes no representations or warranties with respect to this manual or with respect to the products described herein. Polar Electro Inc./Polar Electro Oy shall not be liable for any damages, losses, costs or expenses, direct, indirect or incidental, consequential or special, arising out of, or related to the use of this material of the products described herein. This product is protected by one or several of the following patents: WO96/20640, US6104947, US 6361502, US 6418394, US 6537227, US6714812, FI88972, FR92.09150, GB2258587, HK306/1996, SG9592117-7, US5486818, FI 88223, DE 4215549, FR 92.06120, GB 2257523, HK 113/1996, SG 9591671-4, US 5491474, FI96380, US5611346, EP665947, DE69414362, FI4150, DE20008882.3, FR0006504, US6477397, FI4069, DE29910633, GB2339833, US6272365. Other patents pending. Manufactured by: Polar Electro Oy Professorintie 5 FIN-90440 KEMPELE Tel +Fax +www.polar.
0537 This CE marking shows compliance of this product with Directive 93/42/EEC.
Polar Electro Oy is a ISO 9001:2000 certied company. Copyright 2005 Polar Electro Oy, FIN-90440 KEMPELE, Finland. All rights reserved. No part of this manual may be used or reproduced in any form or by any means without prior written permission of Polar Electro Oy. The names and logos marked with a symbol in this user manual or in the package of this product are trademarks of Polar Electro Oy. The names and logos marked with a symbol in this user manual or in the package of this product are registered trademarks of Polar Electro Oy.

12. INDEX

12h/24h time mode...9 Alarm on/off...38 Backlight...3 Battery replacement...49 Calories (energy expenditure)..22 Date settings...41 File...20 Halt...18 Heart rate..13 Heart rate limits...29, 35 HeartTouch function..3 HRsit....44 Keylock...18 Lap full....18..49 Low battery indication Recording an exercise..14 Reset the wrist unit...52 Return to the Time display..52 Settings...27 Snooze...39 Sound on/off...45 Start measuring your heart rate..12 Stopwatch...18
Target Zone Alarm...15 Timers...28 Total Values...24 Transmitter...12 Unit setting...46 UpLink Tool..47 User settings...42
Manufactured by Polar Electro Oy Professorintie 5 FIN-90440 KEMPELE Tel +Fax +www.polar.

Polar RS100

User Manual
INSTRUCTIONS RAPIDES POLAR RS100
Summary FILE Duration HR avg Limits (if limits are set) In Zone (if limits are set) Cal / Fat%
Mode Heure Mode Standby (Pr-exercice) Mode Recording (Enregistrement Exercice) Visualisez en dtail les donnes de votre dernire sance dexercice. Visualisez les donnes cumules de toutes vos sances dexercice. Changez lheure, lalarme et dautres rglages.

Press Stop

Appuyez sur

(Heure / Date)

(Cumul dure)

(Rglages Minuteurs)

Appuyez sur Stop

/ Tot.Cal

(Cumul calories)

/ Limits SET

(Rglages Limites)

Summary FILE

(Fichier Rsum)
/ Duration (Dure) AVG / % AVG / MAX / % MAX
(Moyenne / % Moyenne / Max. / % Max.)

Duration

(Dure)

/ Tot.Count

(Nbre dexercices)

/ Watch SET

(Rglages Montre)

HR avg

(FC moy.)

/ ResetAll ?

(Tout remettre zro ?)

/ User SET

(Rglages Personnels)

In Zone

Appuyez

/ Cal / Fat%

(Cal. / % graisse)
(Dans Zone - si les 2 x sur Stop limites sont rgles)

(Temps intermdiaires)

RS100 QUICK GUIDE

Cal / Fat%

/ Laps

Standby mode

(Limites - si les limites sont rgles)
(Dans / Au-dessus / En dessous Zone)

/ General SET

(Rglages Gnraux) Change alarm, time and other settings. View long-term information on your exercise sessions.

Recording mode

Limits
/ Limits (Limites) / In / Above / Below Zone

Time mode

View detailed information on your latest exercise sessions.
Appuyez sur le bouton Rouge

Press Red button

Time / Date / Duration % / Avg HR / % / Max HR / Limits / In / Above / Below Zone / Cal / Fat% / Laps Press Red button
Tot.Time / Tot.Cal / Tot.Count / ResetAll ?
Timer SET / Limits SET / Watch SET / User SET / General SET
Appuyez sur le bouton Rouge Time / Date
Appuyez sur le bouton Rouge Tot.Time
Appuyez sur le bouton Rouge Timer SET
Press 2 x Stop Press Red button

Wrist Unit Buttons

Note: Pressing a button briefly has a different effect than pressing and holding the button for a longer period of time (for at least 1 second). Light Turn the backlight on. Turn the Keylock on or off in Time and Exercise modes (press and hold the button for at least 1 second). Keylock prevents accidental pressing of the buttons. Move to the next mode or menu level. Increase the selected value. Change the top row information in the Exercise recording mode and in the Time mode. Turn the target zone alarm on or off during Exercise recording mode (press and hold the button for at least 1 second).
Stop Stop, pause or cancel the function. Exit the menu and return to the previous level of the menu. Return to the Time mode (press and hold the button for at least 1 second) in all modes except in the exercise mode. Enter the Alarm setting mode in the Time mode (press and hold the button for at least 1 second). Heart Touch (hands free button) To view the time and target zone limits during exercise without pressing buttons, bring the wrist unit near the Polar logo on the transmitter.

Move to a previous mode or menu level. Decrease the selected value. Change the lower row information in the Exercise recording mode.
Red button Start, enter or accept the function. Enter the displayed mode or menu and move to a lower menu level. Enter the exercise mode. Enter the Exercise recording mode from the Time mode (press and hold the button for at least 1 second).

Contents

1.INTRODUCTION TO THE RS100 RUNNING COMPUTER....7 1.1 PRODUCT ELEMENTS....7 1.2 USING YOUR POLAR RS100 FOR THE FIRST TIME....8 2. EXERCISING.....12 2.1 WEARING YOUR TRANSMITTER.....12 2.2 EXERCISE RECORDING.....14 2.3 FUNCTIONS DURING EXERCISE....15 2.4 STOPPING THE EXERCISE AND VIEWING SUMMARY FILE...19
3. VIEWING RECORDED INFORMATION - FILE.....20 4.TOTAL VALUES.....24 4.1 VIEWING TOTAL VALUES.....24 4.2 RESETTING TOTAL VALUES....26 5.SETTINGS......27 5.1 TIMER SETTINGS......28 5.2 LIMITS SETTINGS......29 5.2.1 OwnZone Limits....30 5.2.2 Manual Limits.....34 5.2.3 Deactivate Target Zone Limits....37

5.3 5.4 5.5 5.6

WATCH SETTINGS.....38 5.3.1 Alarm......38. 5.3.2 Time Setting....40 5.3.3 Date Setting....41 USER SETTINGS.....42 GENERAL SETTINGS....45 5.5.1 Sound Setting.....45 5.5.2 Unit Setting.....46 PERSONALIZE YOUR WRIST UNIT WITH A LOGO...47
6. CARE AND MAINTENANCE.....48 7. PRECAUTIONS.....50 8. FREQUENTLY ASKED QUESTIONS....52 9.TECHNICAL SPECIFICATIONS....54 10. LIMITED POLAR INTERNATIONAL GUARANTEE....56 11. POLAR DISCLAIMER.....57 12.INDEX.....58

Dear customer,

Congratulations on your purchase of a new Polar RS100 Running Computer! Your running computer helps you achieve your exercise goals. It provides feedback on your bodys response to exercise. The following tasks can be performed with the running computer:

Planning

Base your training and various exercise sessions on heart rate.

Adapting to environment

Your heart rate responds to internal and external factors acting on your body (for example, stress, lack of sleep, altitude and temperature). Using your running computer will help ensure a quality workout in varying conditions. Read this manual carefully to familiarize yourself with your running computer. This manual also contains a section about maintenance. Have success and fun using your running computer!
Setting pace and controlling intensity

Pausing exercise: Press the Stop button. Exercise recording, stopwatch and other calculations are paused. You can view the upper row information by pressing. To continue, press the Red button. Exercising in the dark: If you activate the backlight by pressing the Light button during an exercise recording, the backlight will reactivate automatically during the same exercise every time you press any button or use the Heart Touch function. Keylock : Press and hold the Light button to lock or unlock all buttons, except the Light button. Locked or Unlocked is displayed. Keylock is useful when engaging sports where you might get accidental button press.
2.4STOPPING THE EXERCISE AND VIEWING SUMMARY FILE
1. Press the Stop button to pause the exercise recording. Paused and the Standby symbol are displayed. 2. Press the Stop button. Summary FILE is displayed and the following information starts scrolling: Duration (total exercise time) HR avg (average heart rate) Limits (upper and lower limits of your target zone; if limits are set) In Zone (time spent in your target zone; if limits are set) Cal / Fat% (accumulated calories burnt during exercise/fat percentage of burnt calories)
The wrist unit returns automatically to Time mode after scrolling through the summary file.
Note: The alternating information switches automatically on the display. Alternate the information manually by pressing the Red button or stop the review by pressing the Stop button. Detailed exercise information is placed in the File mode.
3. VIEWING RECORDED INFORMATION - FILE
The exercise File allows you to review heart rate and exercise information collected while recording an exercise session. Your exercise information is saved only if the stopwatch has been on for more than one minute or one lap has been restored. 1. In the Time mode, press. File is displayed. 2. Press the Red button. Date and Time alternate on the display. 3. Press / to browse through the recorded information.
Press Red button Time / Date Duration % / Avg HR / % / Max HR Limits In / Above / Below Zone Cal / Fat% Laps Recorded exercise file information Recording date and exercise starting time alternate on the display

/ / / /

Note: The alternating information switches automatically on the display. For quick scrolling, press the Red button.
Recorded exercise file information Duration of recorded exercise Alternation between: - Average heart rate - % of average heart rate
- Maximum heart rate - % of maximum heart rate
The upper and lower limits of your target heart rate zone (if limits are set) Note: The limits of your target heart rate zone are displayed as %HR or as bpm, depending on the heart rate view mode. For further information, see page 17.
Recorded exercise file information Alternation between: Time spent - in - above - below your target zone during exercise (if limits are set) Calories burnt while exercising and fat percentage of burnt calories *
* An estimate of fat consumption is calculated using total kilocalories (Cal) expended during a training session. Fat percentage can vary between 10 and 60%. For example, if total energy expenditure during exercise is 245 Cal and fat percentage is 45%, then 45% of the energy needed for exercise was taken from fat resources and 55% from carbohydrates.
Recorded exercise file information Number of laps while exercising To view detailed lap information, press the Red button. BestLap, lap time and lap number are displayed Press / to scroll through the lap information To stop viewing lap information, press Stop
Note: The best lap information is displayed if you have stored at least three laps. The best lap cannot be the last lap. Split time Lap time average heart rate and heart rate at the end of the lap alternate lap number
To return to Time mode, press and hold the Stop button.

4.TOTAL VALUES

Total values include cumulative values of information recorded during your training sessions. Use the Total values file as a weekly/monthly counter of your training values. The values are updated automatically, when exercise recording is stopped. This function keeps track of your cumulative values starting from the last reset. For further information on how to reset the values, see page 26.
Note: If there are no Total values accumulated yet, No Totals is displayed.

4.1 Viewing Total Values

1. In the Time mode, press the or button until Totals is displayed. 2. Press the Red button. Tot.Time and the total time are displayed. 3. Use the or button to browse through the following information:
Total values Press Red button Tot.Time Tot.Cal Tot.Count ResetAll ?
The date cumulation started* Total cumulative exercise duration starting at previous reset
* If no Total values are accumulated yet, the reset date is displayed.
Total values The date cumulation started* Total cumulative burnt kilocalories (Cal) starting at previous reset
The date cumulation started* Total cumulative exercise count starting at previous reset

Reset all Total values. For further information, see page 26.
To exit Total values, press the Stop button. To return to Time mode, press and hold the Stop button.
Note: When the Total values memory become full, the accumulation starts from the 0 again.
4.2Resetting Total Values
Use Total values as a seasonal (or weekly/monthly) counter of your exercise values by resetting them once a season. Once reset, a value cannot be retrieved. You can reset one particular value or all values at once (ResetAll?). Start with any display in the previous table (Tot.Time, Tot.Cal, Tot.Count, or ResetAll?). 1. Press the Red button to start resetting the desired value. Reset? is displayed. 2. Press the Red button. Are You Sure is displayed. 3. If sure, press the Red button. Alternatively, to cancel the reset, press the Stop button. To return to Time mode, press and hold the Stop button.

5.Settings

You can view or change the settings in the Settings menu. To set values: Select or adjust using or. The numbers scroll faster if you press and hold or while adjusting values. Accept your selection and go deeper in the menu with the Red button. Cancel your selection or return to the previous mode or menu by pressing Stop.
Press Red button Timer SET / Limits SET / Watch SET / User SET / General SET Tip: Learn how your training can benefit from your running computers features by consulting the running and training tips at polarpersonaltrainer.com.

5.1Timer Settings

Running intervals is an important part of developing your running performance. Your running computer is equipped with two alternating timers, allowing you to set one repeating or two different alternating time intervals.
Tip: You can set timer 1 for a sprint/run of 4 minutes and timer 2 for a 2-minute recovery. Once set, the first timer will begin when the stopwatch is started in Recording mode. When Timer 1 is finished the alarm sounds once and Timer 2 automatically starts. When Timer 2 is finished the alarm will sound twice and Timer 1 automatically begins again, and so on.
1. In Time mode, press. Settings is displayed. 2. Press the Red button. Timer SET is displayed. 3. Continue by pressing the Red button and follow the steps below:

The display reads: 4.Timer 1 On / OFF 5. Minutes 6.Seconds Press or to set Press the Red button to accept Red button Red button Red button
/ turn the Timer 1 on or off / adjust the minutes (0-99 minutes) / adjust the seconds (0-59)
To set Timer 2, return to step 4. To return to Time mode, press and hold the Stop button.
5.2 Limits Settings (Target Heart Rate Zone setting)

OwnZone

Your running computer is able to determine your individual aerobic (cardiovascular) heart rate zone automatically. This is called OwnZone (OZ). OwnZone ensures that you exercise within safe limits.

Manually set Target Zone

You can create a target heart rate zone by setting upper and lower heart rate limits manually. Use this feature to maintain a particular level of intensity, depending on your objectives.
Deactivate Target Zone Limits
You can also deactivate target zone limits. 1. In the Time mode, press. Settings is displayed. 2. Press the Red button. Timer SET is displayed. 3. Press until Limits SET is displayed. 4. Press the Red button. OwnZone, Manual or Off starts flashing. 5. Press or to select OwnZone, Manual or Off. For further information on OwnZone see page 30, for manual limits see page 34.
5.2.1OWNZONE LIMITS The OwnZone (OZ) feature determines your personal training zone primarily based on your heart rate variability. For most adults, OwnZone corresponds to 65-85 % of maximum heart rate (HRmax). The OwnZone varies daily, depending on your physical condition and mental state (for example, if you are not recovered from the previous training or feel stressed.) OwnZone limits can be determined in 1-5 minutes during a warm-up period by walking, jogging or doing another sport. If determination based on heart rate variability is not successful, the previous OwnZone limits or your age predicted limits (65-85% of HRmax) are used. (See the steps 1-4 on page 29.)
The display reads: 5. OwnZone / Manual / Off LIM 6. HR / HR % Press or to set Press the Red button to accept Red button Red button

/ select OwnZone limits / select heart rate format: beats per minute or % of your maximum heart rate
Tip: See polarpersonaltrainer.com for heart rate based Polar Training Programs.
Determining Your OwnZone Heart Rate Limits
Before you start to determine your OwnZone, make sure that: You entered your user settings correctly. The wrist unit will ask for missing information (for example date of birth) before accepting limit settings. You activate the OwnZone limits. With the function on, the wrist unit will automatically determine your OwnZone everytime you start recording an exercise session. You should redefine your OwnZone: When changing your exercise environment or exercise mode. If you feel unusual about the physical state of your body when starting to exercise. For example you are stressed or not feeling well. The main idea is that you start your exercise with a warm-up period at a light intensity i.e. heart rate lower than 100 bpm/ 50% HRmax. You then gradually increase the intensity of your exercise to raise your heart rate.
1. Start your exercise as described in the section Exercise Recording on page 14. 2. OwnZone determination begins and the OwnZone symbol appears in the upper row of the display. Alternatively, to skip OwnZone determination and use the previously determined OwnZone, press the Red button. Determination of your OwnZone happens in five stages. Walk at a slow pace for 1 min. Keep your heart rate below 100 bpm/ 50% HRmax during this first stage. After each stage you will hear a beep (if the sound settings are on) and the display automatically illuminates (if you have switched the backlight on once before), indicating the end of the stage. Walk at a normal pace for 1 min. Slowly increase your heart rate by 10-20 bpm/ 5% HRmax. Walk at a brisk pace for 1 min. Slowly increase your heart rate by 10-20 bpm/ 5 % HRmax. Jog at a slow pace for 1 min. Slowly increase your heart rate by 10-20 bpm/ 5% HRmax. Jog at brisk pace or run for 1 min. 3. At some point during the five stages you will hear two beeps. Your OwnZone has now been determined and you can begin your planned exercise session. The OwnZone determination method (see the table on the next page) and OwnZone heart rate limits are displayed. The limits are displayed as beats per minute (bpm) or as a percentage of your maximum heart rate (%HR) depending on your settings.
The display reads:OwnZone determination methodReasons for using this method OwnZone If not successful, then OZ latest previous OwnZone based on heart rate variability your heart rate variability decreased either too slowly or too fast or your heart rate exceeded the safety limit of the OwnZone determination heart rate variability

If not successful, then AgeBased age-based heart rate zone (65-85% of HRmax) heart rate variability based OwnZone determination was not successful and no previous OwnZone determination existed
Note: OwnZone has been developed for healthy people. Some health conditions may cause heart rate variability based OwnZone determination to fail, for example high blood pressure, some cardiac arrhythmias, and some medications.
You can now continue with your exercise. Try to stay inside the given heart rate zone to maximize exercise benefits.
Tip: For further information on OwnZone, see www.polar.fi.
5.2.2 MANUAL LIMITS If you have not entered your date of birth in Basic Settings, the wrist unit will ask for the missing information before accepting the limit settings. The wrist unit displays your previously defined heart rate limits. Alternatively, if you have not defined the manual limits before, your age-based limits are displayed. (See steps 1-4 on page 29.)
/ select Manual / select heart rate format: beats per minute or % of your maximum heart rate / adjust the upper limit / adjust the lower limit

7. HighLimit 8. LowLimit

Red button Red button
Instead of determining your target heart rate zone by using OwnZone, you can define your target heart rate limits by using the age formula. Your target heart rate zone is a range between lower and upper heart rate limits expressed as percentages of your maximum heart rate (HRmax) or as beats per minute (bpm). HRmax is the highest number of heartbeats per minute during maximum physical exertion. The wrist unit calculates your HRmax, using to your age: Maximum heart rate = 220-age. For more accurate measurement of your HRmax, visit your doctor or exercise physiologist for an exercise stress test.
How to use the Target Heart Rate Zones
In exercise, different heart rate zones produce different fitness and health benefits. The heart rate zones that suit you depend on your goal and your basic physical condition.
Tip: For further information on target zones and for a personalized training program, see polarpersonaltrainer.com.
The table below contains target heart rate zones in beats per minute (bpm) estimated by age in 5-year intervals. Calculate your own HRmax, write down your own target heart rate zones and select the ones suitable for your training.
Age HRmax 20 25 30 35 40 45 50 55 60 155

The display reads: 5. Time 12h / 24h 6. AM / PM (for 12h format) 7. Hours 8. Minutes Press or to set Press the Red button to accept Red button (Skip step 6 for 24h format) Red button Red button Red button
5.3.3 DATE SETTING 1. In Time mode, press. Settings is displayed. 2. Press the Red button. Timer SET is displayed. 3. Press / until Watch SET is displayed. 4. Continue by pressing the Red button until Date is displayed and follow the steps below:
Note: The order for setting the date depends on the time format selected (24h: day - month - year / 12h: month - day - year). The display reads: 5. Day / Month Press or to set Press the Red button to accept Red button
/ adjust the day (in 24h format) or the month (in 12h format) / adjust the month (in 24h format) or the day (in 12h format) / adjust the year

6. Month / Day

7. Year

5.4 User Settings

Entering correct personal information ensures that your calorie counter operates with the highest possible degree of accuracy. 1. In the Time mode, press. Settings is displayed. 2. Press the Red button until Timer SET is displayed. 3. Press / until User SET is displayed. 4. Press the Red button to specify the user information settings and follow the steps below:
The display reads: 5. Weight kg / lbs Press or to set Press the Red button to accept Red button

/ adjust your weight

Note: The weight and height units depend on your choice in the Units settings. If you previously chose the wrong units, change them in weight and height setting mode by pressing and holding the Light button. To change your settings, press Stop and return to step 4. 6. Height cm / ft inch (for Unit 2) / adjust your height / Red button Red button
The display reads: 7. Birthday Day / Month Month / Day Year 8. Sex MALE / FEMALE
Press the Red button to accept Red button Red button Red button
/ adjust the day (in 24h format) or the month (in 12h format) / adjust the month (in 24h format) or the day (in 12h format) / adjust the year / select gender
The display reads: 9. HR Max
/ adjust this, if you know your laboratory measured current maximum heart rate value Your age-predicted maximum heart rate value (220-age) is displayed as a default setting when you set this value for the first time. / adjust your heart rate value in a sitting position

10. HR Sit

HRmax is used to estimate energy expenditure. HRmax is the highest number of heartbeats per minute during maximum physical exertion. HRmax is also useful when determining exercise intensity. The most accurate method for determining your individual HRmax is to perform a maximal exercise stress test in a laboratory. HRsit is used to estimate energy expenditure. To determine your HRsit easily, wear your transmitter, sit down and do not engage in any physical activity. After two or three minutes, press the Red button in Time mode to view your heart rate. This is your HRsit. To calculate your HRsit, more precisely, repeat the procedure several times and calculate your average.

Maximum heart rate value (HRmax)
Heart rate value in a sitting position (HRsit)

5.5 General Settings

You can view and change the following settings in the General Settings mode: sound On or Off unit format (kg/cm or lb/ft) 5.5.1Sound Setting Sound settings include the button sound and Stopwatch sounds. Sound settings do not affect the watch alarms. 1. In Time mode, press. Settings is displayed. 2. Press the Red button until Timer SET is displayed. 3. Press / until General SET is displayed. 4. Press the Red button and follow the steps below:
The display reads: 5. Sound On / OFF Press or to set Press the Red button to accept Red button
/ select the sound on or off
Note: Wrist unit sounds and the backlight function are turned off when the low battery symbol work once if it is set before the symbol appears. is displayed. However, the Watch Alarm will
5.5.2 Unit Setting 1. In the Time mode, press. Settings is displayed. 2. Press the Red button until Timer SET is displayed. 3. Press / until General SET is displayed. 4. Press the Red button twice and follow the steps below:
The display reads: 5. Unit kg/cm / Unit lb/ft 1 / 2 Press or to set Press the Red button to accept Red button

/ select unit

Note: The Unit setting affects to personal information units and watch settings.
5.6 PERSONALIZE YOUR WRIST UNIT WITH A LOGO
You can personalize your running computer by designing and transfering your own logo to the display of the wrist unit. For this you need the Polar UpLink Tool. Download the Polar UpLink Tool at www.polar.fi or polarpersonaltrainer.com. To use the Polar UpLink Tool, you need a PC with a sound card and dynamic loudspeakers or headphones. See www.polar.fi or polarpersonaltrainer.com for further instructions.

6. CARE AND MAINTENANCE

Caring for Your RS100
Like any electronic device, the Polar training computer should be treated with care. The suggestions below will help you fulfill guarantee obligations and enjoy this product for many years to come. Detach the transmitter connector from the strap and rinse the strap under running water after every use. Dry the connector with a soft towel. Never use alcohol or any abrasive material (steel wool or cleaning chemicals). Wash the strap regularly in a washing machine at 40C/104F or at least after every fifth use. This ensures reliable measurement and maximizes the life span of the transmitter. Use a washing pouch. Do not soak, spin-dry, iron, dry clean or bleach the strap. Do not use detergent with bleach or fabric softener. Never put the transmitter connector in the washing machine or drier! Dry and store the strap and the transmitter connector separately to maximize the transmitter battery lifetime. Wash the strap in a washing machine before long-term storage and always after use in pool water with high chlorine content. Keep your training computer and transmitter in a cool and dry place. Do not keep them in a damp environment, in nonbreathable material (a plastic bag or a sports bag) nor with conductive material (a wet towel). The training computer and transmitter are water resistant, and can be used in water activities. Do not expose the training computer to direct sunlight

for extended periods, such as by leaving it in a car or mounted on the bike mount. Keep your training computer clean. To maintain the water resistance, do not wash the training computer with a pressure washer. Clean the training computer with a mild soap and water solution and rinse it with clean water. Do not immerse it in water. Dry it carefully with a soft towel. Never use alcohol or any abrasive material such as steel wool or cleaning chemicals. Avoid hard hits to the training computer, as these may damage the sensor units.

Service

During the two-year guarantee/warranty period we recommend that you have service done by an authorized Polar Service Center only. The warranty does not cover damage or consequential damage caused by service not authorized by Polar Electro. For contact information and all Polar Service Center addresses, visit www. polar.fi/support and country specific websites. Register your Polar product at http://register.polar.fi/ to ensure we can keep improving our products and services to better meet your needs. Note: The username for your Polar Account is always your email address. The same username and password are valid for Polar product registration, polarpersonaltrainer.com, Polar discussion forum and Newsletter registration.

Changing Batteries

Training Computer We recommend that you have the training computer battery replaced by an authorized Polar Service Center. They test your Polar training computer for water resistance after battery replacement. The low battery indicator is displayed when 1015% of the battery capacity is left. Excessive use of the backlight drains the battery more rapidly. In cold conditions, the low battery indicator may appear, but will disappear when the temperature rises. The backlight and sound are automatically turned off when the low battery indicator is displayed. Any alarms set prior to the appearance of the low battery indicator will remain active. Transmitter Connector The WearLink+ transmitter has a user changeable battery. To change the battery yourself, please follow the instructions carefully. When changing the battery, make sure the sealing ring is not damaged, in which case you should replace it with a new one. You can purchase the sealing ring/battery kits at well-equipped Polar retailers and authorized Polar Services. In the USA and Canada, the additional sealing rings are available at authorized Polar Service Centers. In USA the sealing ring/battery kits are also available at www.shoppolar.com.

Keep the batteries away from children. If swallowed, contact a doctor immediately. Batteries should be properly disposed of according to local regulations. When handling a new, fully charged battery, avoid clasp-like contact, i.e. simultaneous from both sides, with metal or electrically conducting tools, like tweezers. This may short-circuit the battery causing it to discharge more rapidly. Typically, short circuiting does not damage the battery, but it may decrease the capacity and lifetime of the battery. 1. Using a coin, open the battery cover by turning it counterclockwise to OPEN. 2. Insert the battery (CR2025) inside the cover with the positive (+) side against the cover. Make sure the sealing ring is in the groove to ensure water resistance. 3. Press the cover back into the connector. 4. Use the coin to turn the cover clockwise to CLOSE.
Danger of explosion if the battery is replaced with wrong type.

7. Precautions

The Polar training computer displays your performance indicators and helps you achieve your personal training goals. It indicates the level of physiological strain and intensity during your exercise. No other use is intended or implied. Minimizing Possible Risks When Exercising Training may include some risk. Before beginning a regular training program, answer the following questions concerning your health status. If you answer yes to any of these questions, consult a physician before starting any training program. Have you been physically inactive for the past 5 years? Do you have high blood pressure or high blood cholesterol? Do you have symptoms of any disease? Are you taking any blood pressure or heart medication? Do you have a history of breathing problems? Are you recovering from a serious illness or medical treatment? Do you use a pacemaker or another implanted electronic device? Do you smoke? Are you pregnant?
Note that in addition to exercise intensity, medications for heart, blood pressure, psychological conditions, asthma, breathing etc. as well as some energy drinks, alcohol and nicotine may affect your heart rate. It is important to be sensitive to your bodys responses during exercise. If you feel unexpected pain or excessive fatigue when exercising, it is recommended that you stop the exercise or continue at a lighter intensity. Notice to individuals with pacemakers, defibrillators or other implanted electronic devices. Individuals who have a pacemaker use the Polar Running Computer at their own risk. Before starting use, we always recommend a maximal exercise stress test under a doctors supervision. The test is to ensure the safety and reliability of the simultaneous use of the pacemaker and the Polar Running Computer. If you are allergic to any substance that comes into contact with your skin or if you suspect an allergic reaction due to using the product, check the listed materials on page 55. To avoid any skin reaction to the transmitter, wear it over a shirt. However, moisten the shirt well under the electrodes to ensure flawless operation.