SPECIFIC 0720 5W-30

Lubricant for RENAULT Diesel engines With DPF EURO IV and EURO V emission level 100% Synthetic
TYPE OF USE Specifficaly designed for the latest generation of Diesel engines with diesel particulate filter (DPF) from RENAULT group (Renault, Dacia, Samsung) requiring an approved Renault RN0720 oil, and meeting EURO IV or EURO V emissions level. For the 2,2L dCi with DPF engines, use only Renault RN0710 approved product such as MOTUL Specific 5W-40 or MOTUL 8100 X-clean 5W-40. Renault RN0720 standard applies also to the vehicles RENAULT Laguna III 1,5L dCi without DPF built before October 2008 and RENAULT Kangoo II 1,5 dCi without DPF built before June 2008. Before use, always refer to the vehicle owners manual. PERFORMANCES STANDARDS APPROVALS ACEA A3 / B4 C4 Renault RN0720 under N RN0720-08-005
RENAULT has developed RN0720 standard for oils able to endure the most severe thermal constrains along with modern after treatement systems compatibility. The very low Sulfated Ash level, and reduced Sulphur and Phosphorous contain (Low SAPS) technology protect and extend lifetime of after treatement systems. The 100% synthetic base stock provides a high thermal stability and insure an exceptional resistance at high temperatures. Prevent from varnish and sludge to maintain engine cleanliness. Lower the risk of ring sticking. Maximum protection and performance of the lubrifiant preserved even in the most severe conditions. Low volatility for a reduced oil consumption and outstanding oxidation resistance of the oil to ensure extended oil drain intervals set by the carmaker. Fullfil the most stringent performance and durability requirements through the Long Life Renault (LLR) test validation. Except for the 2,2L dCi with DPF engine, Renault RN0720 standard applies to all RENAULT vehicles fitted with Diesel DPF engines and also to RENAULT vehicles Laguna III 1,5L dCi without DPF built before October 2008 and Kangoo II 1,5 dCi without DPF built before June 2008. When in doubt, always refer to the vehicle owners manual. RECOMMENDATIONS Drain interval: refer to manufactuers recommendations and tune to your own use. Do not mix with non RN0720 approved oils. PROPERTIES Viscosity grade Density at 20C (68F) Viscosity at 40C (104F) Viscosity at 100C (212F) HTHS viscosity at 150C (302F) Viscosity index Pour point Flash point Sulfated ash TBN SAE J 300 ASTM D1298 ASTM D445 ASTM D445 ASTM D4741 ASTM D2270 ASTM D97 ASTM D92 ASTM D874 ASTM D2896 5W-30 0.850 68.1 mm/s 11.9 mm/s 3.55 mPa.s 172 -36C / -32.8F 224C / 435.2F 0.49 % weight 6.0 mg KOH/g
We retain the right to modify the general characteristics of our products in order to offer to our customers the latest technical development Product specifications are definitive from the order which is subject to our general conditions of sale and warranty. Made in FRANCE. MOTUL -119 Bd Flix Faure - 93303 AUBERVILLIERS CEDEX - BP 94 Tel : Fax : Web Site: www.motul.fr 06/10