E-50/E-60 Version 1.11 Updating Instructions
To update the E-50/E-60 you need a PCMCIA Adapter and a memory card with at least 6 Mbyte free space. UPDATING THE OPERATING SYSTEM (WINDOWS) For Operating System(s): Windows Vista / WindowsXP / WindowsME / Windows2000 / Windows98SE WARNING: The complete Update operation takes about 8 minutes. Though your user data are preserved during the update, we recommend that you make a backup to avoid damaging your data in case something goes wrong. Before starting the update procedure, make sure that the Internal Protection switch (on the E-50/E-60 rear panel) is set to the OFF position (unlocked position). We also recommend saving your personal User Program Set before updating, as follows: - Press [DISK & MEDIA] > [SAVE] > [USER PROGRAM SET] - Name your Set - Select [INTERNAL MEMORY] and press [EXECUTE] Prepare the memory card to accept data 1. Insert the memory card into the PCMCIA Adapter. 2. Insert the PCMCIA with memory card into the E-50/E-60 PCMCIA slot and switch on the E50/E-60. 3. If your memory card has already been initialised using an E-50/E-60 you can go directly to step 5. 4. Press [DISK & MEDIA] > [FORMAT] > [EXTERNAL MEMORY] ]> [YES] and wait for the format operation to complete. Loading update data into memory card 5. Connect the E-50/E-60s to your computer using the USB port. 6. If a floppy disk is inserted in the drive, remove it before proceeding. 7. Press [MENU] > [USB DATA STORAGE] > [EXTERNAL MEMORY]. As soon as the connection has been established, the E-50/E-60s display shows CONNECTED 8. On your computer, open the My Computer window. Locate the memory card which will show as a Removable Disk (E50_CARD/E60_CARD icon). 9. Download from www.rolandkeyboardclub.com the file E-50 OS version 1.11.zip for the E50 or the file E-60 OS version 1.11.zip for the E-60 and unzip it in your computer. 10. Copy the.sys file (the update file) to the Update folder of your memory card. 11. When the file has been copied, terminate the USB connection using the tray icon at the right of your computers tool bar. The tray icon related to the USB connection looks like a green arrow on top of an electronic device (usb socket with green symbol for Window Vista).
Leave the mouse pointer on this icon and wait for the Safely remove hardware message to appear. 12. Using the left mouse button, double-click this icon to open a window that lists all hardware devices that are currently connected. Select USB mass storage device and check at the bottom whether the description refers to your memory card (E50_CARD/E60_CARD). 13. Click Disconnect, and in the next window OK. Wait until a message informs you that you can disconnect the hardware. 14. Click OK to close this window. Update your E-50/E-60 with Version 1.11 15. Hold down the [DISK&MEDIA] button to the lower left of the display while switching on the E-50/E-60. Keep holding that button until the SYSTEM UPDATE message appears. 15. Press the 8 BEAT / 16 BEAT button in the E-50/E-60 STYLE section. The E-50/E-60 starts loading the 1.11 software version. When all data have been loaded, the Power Off and Power On again message appears. Switch off the E-50/E-60, wait a moment, then switch it on again. 19. Note: Before proceeding with step 19 make sure you have saved your personal User Program Set before updating, as follows: - Press [DISK & MEDIA] > [SAVE] > [USER PROGRAM SET] - Name your Set - Select [INTERNAL MEMORY] and press [EXECUTE] Press [MENU] > [UTILITY] > [FACTORY RESET], and [EXECUTE] to initialize E-50/E-60. Press the [EXIT] button to return to the main page. UPDATING THE OPERATING SYSTEM (MACINTOSH) For Operating System(s): MacOSX / MacOS WARNING: The complete Update operation takes about 8 minutes. Though your user data will be preserved during the update, we recommend that you make a backup to avoid damaging your data in case something goes wrong. Before starting the update procedure, make sure that the Internal Protection switch (on the E-50/E-60 rear panel) is set to the OFF position (unlocked position). We also recommend saving your personal User Program Set before updating, as follows: - Press [DISK & MEDIA] > [SAVE] > [USER PROGRAM SET] - Name your Set - Select [INTERNAL MEMORY] and press [EXECUTE] Prepare the memory card to accept data 1. Insert the memory card into the PCMCIA Adapter.

2. Insert the PCMCIA with memory card into the E-50/E-60 PCMCIA slot and switch on the E50/E-60. 3. If your memory card has already been initialised using the E-50/E-60 you can go directly to step 5. 4. Press [DISK & MEDIA] > [FORMAT] > [EXTERNAL MEMORY] ]> [YES] and wait for the the format operation to complete. Loading update data into memory card 5. Connect the E-50/E-60s USB port to your computer. 6. If a floppy disk is inserted in the drive, remove it before proceeding. 7. Press [MENU] > [USB DATA STORAGE] > [EXTERNAL MEMORY]. As soon as the connection has been established, the E-50/E-60s display shows CONNECTED 8. Switch to your computer desktop. It should contain a E50_CARD/E-60_CARD icon that refers to your memory card. 9. Double-click the E50_CARD/E60_CARD icon. 10. Download from www.rolandkeyboardclub.com the file E-50 OS version 1.11.zip for the E-50 or the file E-60 OS version 1.11.zip for the E-60 and unzip it in your computer. 10. Copy the.sys file (the update file) to the Update folder of your memory card. 11. When the file is been copied, Drag the E50_CARD/E60_CARD icon to the Trash (or use the equivalent shortcut). Wait until the icon has disappeared from your desktop. Update your E-50/E-60 with Version 1.11 12. Hold down the [DISK&MEDIA] button to the lower left of the display while switching on the E-50/E-60. Keep holding that button until the SYSTEM UPDATE message appears. 13. Press the 8 BEAT / 16 BEAT button in the E-50/E-60 STYLE section. The E-50/E-60 starts loading the 1.11 software version. When all data has been loaded, the Power Off and Power On again message appears. Switch off the E-50/E-60, wait a moment, then switch it on again. 14. Note: Before proceeding with step14 make sure you have saved your personal User Program Set before updating, as follows: - Press [DISK & MEDIA] > [SAVE] > [USER PROGRAM SET] - Name your Set - Select [INTERNAL MEMORY] and press [EXECUTE] Press [MENU] > [UTILITY] > [FACTORY RESET], and [EXECUTE] to initialise E-50/E-60. Press the [EXIT] button to return to the main page.
All rights reserved You are allowed for free personal use without any warranty of any kind. Copy, redistribution and modification, including uploading in any internet site are forbidden.

DIRECTIONS TO: Prag office

> By car

From the South and East (Brno, Bratislava, Wien): Take the exit onto E50 toward Praha/Svitavy and continue onto 5. kvtna, Nuselsk most, Legerova, Wilsonova Take the exit toward Mlad Boleslav/Star Msto/Karln and turn right at Ke tvanici, take the 1st right onto Na po Na po 24, Roland Berger Strategy Consultants Prague Office will be on the left From the North (Teplice, Dresden, Berlin): Take the exit onto E55 and continue onto Libereck, onto V Holeovikch (signs for Plze/Karlovy Vary/ Chomutov), most Barikdnk, Argentinsk, Za viaduktem, nb. Kpt. Jaroe and take the ramp to Brno/esk Budjovice/ Strakonice Merge onto Bubensk, continue onto Hlvkv most and take the exit toward Star Msto/Karln Turn left at Klimentsk, continue onto Strkova, Tnov and turn right at Na po Na po 24, Roland Berger Strategy Consultants Prague Office, will be on the left

TEP LICE DRES DEN

CHOMUTOV CHEMNITZ D7 E55

MLADBOLESLAV D10

AIR POR T RUZYNE
D6 K A R L O VY VA R Y D12 E48 E55 KUTN HORA

E55 D2

P LZEN
From the West (Karlovy Vary, Plze, Munich):
Continue onto D5/E50 and take exit 1 to merge onto E48/Prask okruh Take exit 26 for 6/E48 toward Karlovy Vary/Hostivice/ Praha epy Keep right at the fork, follow signs for Praha epy/Praha Ruzyn and merge onto Route 6/Karlovarsk, continue to follow Route 6 Slight left at Patokova (signs for Hradec Krlov/Mlad Boleslav/Teplice), continue onto M. Horkov, then Veletrn (signs for Brno/esk Budjovice/Hradec Krlov/Mlad Boleslav/Teplice) Turn right at Bubensk (signs for Brno/esk Budjovice) and continue onto Hlvkv most tke the exit toward Star Msto/Karln, turn left at Klimentsk, continue onto Strkova, Tnov and turn right at Na po Na po 24, Roland Berger Strategy Consultants Prague Office, will be on the left

CES KE BUDEJOVICE

KA MENICE
BRNO D 1 B RATIS LAVA WIEN

ens Le t ky el tun

Letensk park

Jaro z Kpt. Nbre se

Hlavkuv bridge

Ostrov Stvanice

Stefanikuv bridge

River Vltava

Nbrez Ludvka Svobody

Klimentsk

Revolucni

h Tru ir

nm. Petrsk

ov Tesn

Zlatnjck

sk kup

Florenc

Wilsonova

> By public transportation
By subway: Subway B, station Masarykovo ndra. Continue onto Hlavkova, turn right at Na po, 150 m Or Subway B or C, station Florenc. Continue onto Na po, 300 m. By tram: Tram 3, 8, 24, 26, station Bl labu Continue onto Na po, 150 m From Praha Ruzyne airport: Take Bus AE (Airport Express) to station Masarykovo ndra; Continue onto Hlavkova, turn right at Na po, 150 m Or Take bus 100, 179, 225 to station Zlin, Nov Butovice or Stodlky; Transfer to subway B, continue to station Florenc; Continue onto Na po, 300 m

i oric Na p V celnici

Havlickova

Na Florenci

Train Station P Masarykovo.

Nmest Republiky

Hybernsk

Husitsk

DOW NT OW N
Train Station Praha hlavni
Roland Berger Strategy Consultants GmbH Na Po 00 Prague 1, Czech Republic Phone +511 Fax +510 www.rolandberger.cz