Workshop

JUNO-Gi
Mobile Synthesizer and Digital Recorder
Using the JUNO-Gis Live Audio Inputs and BOSS Effects
2011 Roland Corporation U.S. All rights reserved. No part of this publication may be reproduced in any form without the written permission of Roland Corporation U.S.

JUNOGiWS03

About the JUNO-Gi Workshop Booklets
The Roland JUNO-Gi Mobile Synthesizer with Digital Recorder is an affordable, portable, perfect instrument for performers and songwriters. Its got a top-of-the-line sound engine and over 1300 exciting new sounds. The onboard digital recorder allows you to record and develop your songs, with dedicated faders and acclaimed BOSS GT-class effects. With USB MIDI capabilities and its instant MIDI Controller mode, the JUNO-Gi also fits nicely into any computer-based recording system. Finally, the JUNO-Gi sports a versatile USB song player for playing backing tracks onstage. Each JUNO-Gi Workshop Series booklet focuses on one JUNO-Gi topic, and is intended as a companion to the JUNO-Gi Owners Manual. This booklet requires JUNO-Gi Operating System v1.01 or higher. You can download the latest JUNO-Gi O.S. for free from www.RolandUS.com.
Using the JUNO-Gi as an Onstage Mixer
The JUNO-Gi digital recorders BOSS effects allow you to use the JUNO-Gi as a two-channel onstage mixer with a surprising amount of effect power. If
you sing as you play keyboard onstageyou can connect a mic to the
JUNO-Gis GUITAR/MIC audio input, and treat your vocals with effects from the digital recorders MIC bank. (Of course, you can use any onboard effect from other banks, too, if youre the adventurous type.)
youre performing with a guitarist or bassistyou can connect an electric

About This Booklet

With its audio inputs and BOSS GT-class effects, you can connect a mic or electric instrument to the JUNO-Gi and work onstage without having to lug along a mixer. Well explain how in this booklet.
guitar or bass to the JUNO-Gis GUITAR/MIC audio input. The digital recorders GT effects specialize in killer guitar tones in a range of styles.
Understanding the Symbols in This Booklet
Throughout this booklet, youll come across information that deserves special attentionthats the reason its labeled with one of the following symbols.
A note is something that adds information about the topic at hand. If youre performing with an acoustic guitaristor anyone else who plays and acoustic instrumentconnect his or her mic, and follow the instructions below for working with a mic.
You can also use the JUNO-Gis line-level inputs for connecting a backing module or personal music player to perform along with.
A tip offers suggestions for using the feature being discussed. If you want to perform with both a mic and an electric instrument, you can run them through a small mixer and connect its outputs to the JUNO-Gis line-level inputs.
Warnings contain important information that can help you avoid possible damage to your equipment, your data, or yourself.
Setting Up the JUNO-Gi as an Onstage Mixer
Connecting a Mic or Guitar/Bass
The AUDIO INPUT SELECT screen appears. Input level meters
Connect your mic or guitar to the JUNO-Gis rear-panel GUITAR/MIC AUDIO INPUT jack.
Press a button to light it red and turn on its input. To record from
an electric guitar or basspress 1 (GUITAR). a mic press 2 (MIC).
Setting Your Mic or Guitar/Bass Input Level

If youre connecting

a mic that doesnt require phantom powerconnect it to the
GUITAR/MIC jack and set the switch next to the jack to OFF.
When youre using a mic that doesnt require phantom power, make sure youve set the switch to OFFphantom power can damage a mic that doesnt require it.
Set your input level by singing or playing the guitarand turning the GUITAR/MIC jacks rear-panel LEVEL knob as high as you can without causing the AUDIO INPUT PEAK indicator, shown above, on the JUNO-Gis front panel to light red.
If your guitar or bass is still too loud after turning down the LEVEL knob, adjust the instruments output level.
a mic that requires phantom powerconnect it to the GUITAR/
MIC jack and set the switch next to the jack to ON.
Adding Insert Effects to Your Mic or Instrument

Once youve connected your mic or instrument to the JUNO-Gi, you can take advantage of the killer BOSS effects in its digital recorder.
an electric guitar or bassconnect it to the GUITAR/MIC jack and
set the switch next to the jack to GUITAR (Hi-Z).

Selecting Your Input

Press the RECORDER VIEW button to display the RECORDER screen.
Press the RECORDER VIEW button in the DIGITAL RECORDER area, and then press AUDIO INPUT so it lights red.
Press 6 (EFFECT) to display the INSERT FX screen.
The live-audio AUDIO INPUT button has its own level-peak indicator.
Press 4 (LOC) and make sure LOCATION is set to INPUT <NORMAL>. Press EXIT to return to the INSERT FX screen. 3
Insert effect patches are organized into banks according to how youre most likely to use them. Theres a
Press EXIT repeatedly until you return to the Live Set Play screen. Now both the JUNO-Gi keyboard sound and your mic, guitar, or bass are going through the digital recorders mixer. To adjust the level of the
GUITAR bankfull of patches designed for electric guitar and
bass, in a range of styles.
MIC bankwith effect patches designed for a mic.
keyboard soundhold down SHIFT and press the
digital recorders KEYBOARD button to display the KEYBOARD INPUT window, and then adjust the Input Level setting.
Start by selecting the desired bank (the BANK value is already highlighted). Press 6 and then select the specific patch you want. There are factory-programmed Preset effect patches in each bank. You can also build your own User patches. As you select each patch, you can sing or play, etc. to hear what the patch does to your sound.
mic, guitar, or basshold down SHIFT and press
To learn about customizing the JUNO-Gis effects, see the Owners Manual, starting on Page 109. 7
the AUDIO INPUT button to display the AUDIO INPUT SELECT screen, and then adjust the Input Level setting.
Press EXIT repeatedly until you return to the Live Set Play screen.

Working Your Mix

Heres how to balance the levels of the JUNO-Gi keyboard sound and your mic, guitar, or bass:

The End

We hope youve found this workshop helpful. Keep an eye out for other JUNO-Gi Workshop booklets available for downloading at www.RolandUS.com.
Press the KEYBOARD button in the DIGITAL RECORDER area so it lights and the KEYBOARD INPUT window appears.

Press 2 (KEYBOARD) to send the keyboard sound through the mixer without adding the recorders effects. This is the typical way to work.
If youd like to use the same insert effect on your keyboard sound as your mic, guitar, or bass, press 4 (KEYBOARD +INS FX) instead.

The JUNO-Gi as a Sound Module
feeds audio digitally to your DAW, including its own soundssuch as its live sets when youre playing the
JUNO-Gi, or up to 16 tones or rhythms in MIDI Controller mode.
MIDI notes. U S B.are captured in the DAW. Notes are sent to JUNO-Gi..where they play notes. U S B
live audio from instruments or mics connected to its rear-panel
jacksas described in the Using the JUNO-Gis Live Audio Inputs and BOSS Effects Workshop booklet. You can download the booklet by clicking here.
carries the entire stereo audio output of your DAW digitally back to the
JUNO-Giso you can hear its audio tracks, soft synths, and so on, along with the JUNO-Gis sounds, through the JUNO-Gis audio outputs or headphones plugged into the JUNO-Gis PHONES jack.
The JUNO-Gi as Your MIDI Controller
In MIDI Controller mode, you can use the JUNO-Gi as a multitimbral sound module, playing up to 16 of its tones and rhythms at once via MIDI from a DAW. Since the JUNO-Gi also acts as a master MIDI controller, you can use its keyboard for sequencing the DAW MIDI tracks that play the JUNO-Gis sounds. You can also play General MIDI files on your computer and use the JUNO-Gis built-in General MIDI 2 tones as its sounds.
.are captured in the DAW. If youd like to know more about MIDI and/or General MIDI, see our InFocus booklet, An Introduction to MIDI, which you can download here.

MIDI notes. U S B

In its easy-to-use MIDI Controller mode, the JUNO-Gi can act as the master controller for your DAW system. Play the DAWs soft synths from the JUNO-Gi and shape their sound in realtime using the JUNO-Gis knobs, sliders, and buttons. The JUNO-Gi can also play sounds in any external MIDI device connected to your computer (including itself ). Well discuss MIDI Controller mode in Using the JUNO-Gi as a Master MIDI Controller on page 7.
Of course, you can use another MIDI controllersuch as a Roland OCTAPAD SPD-30 digital percussion pad or other keyboard controller if you prefer.
When you use the JUNO-Gi as a sound module, you can send its output to audio tracks in your DAW for recording via the same USB connection you use for MIDI communication. 3
Getting Ready Connecting the JUNO-Gi Via USB to Your Computer
Youll connect the JUNO-Gi to your computer using a standard USB A/B cable. A-type plug B-type plug If your computer is running
Installing the JUNO-Gi Drivers on Your Computer
The JUNO-Gi drivers enable the passing of sounds and MIDI messages between the JUNO-Gi and your computer using a single USB cable. You can find the driver software you need for your JUNO-Gi on the JUNO-Gi DRIVER CD-ROM that shipped with your JUNO-Gi, or download the latest version for your operating system from here.
After installing the drivers, youll need to restart your computer.
Installing the JUNO-Gi Drivers in Windows 7
If youre installing the drivers for Windows XP or Vista, please see the instructions accompanying the installer files. Throughout the installation process, Windows 7 may ask you to allow the installer to change your computer. Click Yes to continue. 1 2

Windowsyoull be instructed to connect the JUNO-Gi to your
computer as part of the driver installation process. Please dont connect it until instructed to do so.
Mac OS Xyou can connect the JUNO-Gi via USB to your computer
before or after driver installation. Heres how to connect the JUNO-Gi to your computer:
Connect the B end of the USB cable to the JUNO-Gis rear-panel USB COMPUTER jack.
Power up your PC with all USB cables disconnected except for your keyboard and mouse. If any applications are running, quit them. Begin by
locating the driver software on the JUNO-Gi CD-ROMand
Connect B plug here. opening the Driver folder, and then the Windows 7 folder.
downloading the JUNO-Gi USB Drivers Windows 7 32-bit or 64-bit

softwarefrom here.

To find out if youre running Windows 7 32-bit or 64-bit, go to the Start menu, click Control Panel, then System Security, and then System. For System Type, youll see 32-bit or 64-bit Operating System. When you download the installer, save it to your desktop without opening it. Then, right-click the downloaded file and select Extract All., choosing the Desktop as the extraction destination. Youll find the installer file in the resulting folder.
Connect the A-plug end of the cable to a USB port on your computer.
When you connect the JUNO-Gi to your computer via USB, youll typically get the best results using USB jacks on the back of a desktop computer or on the side of a laptop. We recommend not using a hub.
Double-click the JUNO-Gi USB MIDI Setup file to display the following window:
Windows 7 presents a window instructing you to
make sure the JUNO-Gi is turned offand then connect the JUNO-Gi via USB to your computeras we described
on page 4, and then turn it on. Once you do these things, the JUNO-Gi drivers are installed.
Click the Close button and youre ready to go.
Installing JUNO-Gi Drivers in Mac OS X
You can use your JUNO-Gi with a computer running Mac OS X 10.6, 10.5, and 10.4.
Click Next to display the installation start window:
You can install the JUNO-Gi driver software with the JUNO-Gi already connected via USB to your Mac via, or not. 1

Begin by

locating the driver software on the JUNO-Gi CD-ROMby opening

the Driver folder, and then the folder for the version of Mac OS X youre using.
downloading the JUNO-Gi driver softwarefrom here. If youre
using Mac OS X 10.6 (Snow Leopard), click JUNO-Gi USB Drivers Mac OS 10.6. If youre using Mac OS X 10.4 or 10.5, click JUNO-Gi USB Drivers Mac OS 10.5 and Earlier. Once youve downloaded the necessary file to your Download folder, double click its folder to reveal the installer file.
Double-click the installer file to launch the driver installer. If youre using
Click NextWindows 7 begin to install the driver, and asks if you wish to complete the process. Checkmark Always trust software from Roland Corporation, and then click Install to proceed.
Mac OS 10.6double-click the JUNOGi_USBDriver.pkg file. Mac OS 10.5 or 10.4double-click the JUNOGiUSBDriver.pkg file.
When the installer launches, the computer may display a message about verifying that your computer can use the JUNO-Gi driver. If you see this message, click Continue to display the installers Introduction screen that lets you confirm you have the correct installer for your version of Mac OS X. 5
If your Mac displays a message about reboot caches, click OK. 8
After you restart, connect your JUNO-Gi via USB if it isnt already connected, and power it up.
The JUNO-Gis Audio Interface
When you want the DAW to record a live set youre playing on the JUNO-Gi, and/or live audio, you can control what gets sent to the DAW. Heres how:
Click Install to view the Installation Type screen.
On the JUNO-Gi, press MENU to display the Top Menu window. Select System, and then press ENTER. Press 1 (GENERAL). Press 6 to select the USB Audio to Computer value.

You can set it to

Click Installthe installer asks for your admin login and password. Enter your admin login and password, and then press click OK. The driver software is installed, and the installer informs you that you need to restart your Mac.
MIXso the JUNO-Gi sends both its live-set sound and live

audio to the DAW.

INPUTso the JUNO-Gi sends only live audio dry, without

effects.

INPUT FXso the JUNO-Gi sends live audio along with any of the
JUNO-Gis built-in BOSS input effects youre using. Select the option you want, and then press EXIT.
When youre in MIDI Controller mode and the DAW is playing JUNO-Gi tones and rhythms, only those tones and rhythms are sent to the DAW, regardless of the USB Audio to Computer setting.

Click Restart. 6

Important JUNO-Gi MIDI Stuff
One MIDI device communicates with another MIDI device using a series of MIDI messages, as explained in the InFocus booklet An Introduction to MIDI. The JUNO-Gi uses these messages when youre using it as a

a DAWs master MIDI controllerIn this role, the JUNO-Gi sends your
computer note-event messages as you play the JUNO-Gi keyboard. In addition, many of its front-panel controls can send Control Change messages to your DAW that let you manipulate sounds in realtime. It can also send sound-selection messages that you can sequence in a DAW MIDI trackwhen the track is played back, it can send out these messages to external devices like the JUNO-Gi, or other connected MIDI sound modules.
You can save your MIDI Controller mode setup in the JUNO-Gis memory at any time so your settings are instantly available when you enter the mode. To save your setup, press the JUNO-Gis WRITE button, as noted at the topright of the MIDI Controller mode screen.

MIDI Channel

multitimbral sound moduleAs a multitimbral sound module, the
JUNO-Gi responds to note-event messages and Control Change messages. Your DAW can also select the JUNO-Gi sounds you want by sending the JUNO-Gi Bank Select and Program Change messages. Well discuss these more later.
The JUNO-Gi can transmit MIDI messages on any of the 16 MIDI channels to your DAW. By default, it uses MIDI Channel 1, though you can change it to any MIDI channel you like. Just make sure that the DAW is set to
receive data on the same MIDI channel, or receive MIDI data on any and all channels.
Using the JUNO-Gi as a Master MIDI Controller Life In MIDI Controller Mode
Once youve installed its drivers, connected to your computer via USB, and your computer and JUNO-Gi are powered up, switch the JUNO-Gi into MIDI Controller mode to use it as your DAWs master MIDI controller. (You also use MIDI Controller mode when youre playing JUNO-Gi tones from your DAW.) Press the MIDI CTRL (for CONTROL) button on the JUNO-Gi to display the MIDI Controller mode screen.

Local Switch

The Local Switch settingshown onscreen as Local Swsets whether the JUNO-Gi keyboard plays its own sounds in MIDI Controller mode or not. When your DAWs using JUNO-Gi sounds, leave this set to Off, since youll play its sounds through the DAW. If you turn Local Sw on when using the JUNO-Gi as both the DAWs master controller and sound module, youll hear each JUNO-Gi note twice, once from the DAW and once from the JUNO-Gi.
This screen determines the behavior of the JUNO-Gi in MIDI Controller mode, with some important settings and features. 7

Sound-Selection Trigger

When you press one of the JUNO-Gis 0-9 category buttons in MIDI Controller mode, the button fires off the three MIDI messages required to select sounds in an external MIDI sound module youre controlling from the JUNO-Gi. Though were talking about using the JUNO-Gi with a DAW, these messages are still important, and are sent between MIDI devices in this order:

Each of the buttons, knobs, and faders shown in blue above can transmit a MIDI Control Change value to your DAW. To program any of them, touch or move it, and its currently assigned MIDI message is displayed at the bottom of the screen. Highlight the controls current setting, and select the MIDI message you want it to transmit.
a Bank Select MSB (for Most Signficant Bit) value a Bank Select LSB (for Least Significant Bit) value a Program Change Value The values are presented in a different order on the JUNO-Gi display.
DAW-Specific Instructions
For the rest of this booklet, well walk you through the details of using the JUNO-Gi with some popular DAWs. (Teaching you how to use your DAW in general is beyond the scope of this booklet, of course.) Well be showing you how to use the JUNO-Gi with
In some MIDI devices and software, Bank MSB and LSB messages are referred to as CC00 and CC32 messages, respectively. You can learn more about MSB and LSB messages in An Introduction to MIDI.
Cakewalk by Roland SONAR X1 LE and SONAR Essential, Studio, and
Produceron page 9. (The steps for using the JUNO-Gi with SONAR 8.5 LE are similar; only the menu and parameter locations have changed.)
In the middle of the screen are the settings for one of the 0-9 buttons. (Button 1 is selected in the screenshot above.) To select a different 0-9 button, touch the buttonthe screen updates to show you the buttons current Bank Select and Program Change buttons. You can assign different Bank Select MSB, LSB, and Program Change values to the currently displayed button by highlighting each setting in turn and selecting the desired value.
Apple Logic Pro 9on page 13. Ableton Liveon page 16.
You can jump to the section on your DAW by clicking its page number above.
Realtime Controller Setup
Were going to assume youve installed the JUNO-Gis USB drivers on your computer, that youve got the JUNO-Gi connected to your computer and powered up, and that your DAW is launched.
Your DAW may allow you to use more than one audio interface, MIDI controller, and/or sound modulewell be describing how to use just the JUNO-Gi for these purposes. If youre an advanced DAW user, you can build upon these instruction if you want to use multiple devices.

SONAR X1 LE and SONAR X1 and the JUNO-Gi Setting Up SONAR X1 LE and SONAR X1
Selecting the JUNO-Gi as Your Audio Interface
Whether youre using SONAR X1 LE or a version of SONAR X1, the method for setting up the JUNO-Gi as your audio interface is the same.
From the Edit menu, select Preferences. Click the Basic button in the lower left of the Preferences window. Click Devices in the Audio section at the left of the screen if its not already highlighted. Un-check all of the available Input Driver and Output Driver checkboxes except for IN (JUNO-Gi) and OUT (JUNO-G). If you dont see the JUNO-Gi on this screen, jump to Step 8, and then come back here.
Click Apply. Click Playback and Recording at the left of the window and select ASIO from the Driver Mode popup like so:
At some point in the setup process, Windows may automatically check the audio interfaces specs. 5 6

Click Apply.

If you didnt see the JUNO-Gi in the Devices pane earlier, click Devices now, and make sure only IN (JUNO-Gi) and OUT (JUNO-Gi) are checked. 10
Click Apply. Click Driver Settings, and set Playback Timing Master to 1: JUNO-Gi OUT and Record Timing Master to 1: JUNO-Gi IN.
If you want to use the JUNO-Gi as your master controller or use its tones, leave the Preferences window open for the next section of this booklet. If not, click Close. 9
Selecting the JUNO-Gi as a MIDI Controller
Heres how to set SONAR to exchange MIDI messages with the JUNO-Gi.
Click Devices in the MIDI area at the left of the Preferences window. (If the Preferences windows not yet open, select Preferences. from the Edit menu.)
When the Define Instrument Names window opens, click Import. Navigate to the junogi_ins folder, and open it.
In the Inputs and Outputs areas, make sure that the JUNO-Gis boxes are checkmarked. Click Apply. If you want to use JUNO-Gi tones with your DAW, leave the Preferences window open for the next section. If not, click Close.
Enabling Simple JUNO-Gi Tone and Rhythm Selection
Using your browser, click this link and download the JUNO-Gi Cakewalk SONAR Instrument Definition List file to your desktop. Right-click the file and choose Extract All., selecting the Desktop as your destination. This creates the junogi_ins folder. Back in SONARs Preferences window, click Instruments in the MIDI area at the left. (If the windows not open, select Preferences. from the Edit menu first.) Click the Define. button, circled in red below.
Select the JUNO-Gi_Tone+GM2.ins file, and click Open. In the Import Instrument Definitions window, make sure Roland JUNO-Gi: Tone is selected, and click OK.
Repeat Steps 4-8, this time selecting the JUNO-Gi_Rhythm+GM2.ins file in Step 7 and Roland JUNO-Gi: Rhythm in Step 8. Back in the Preferences windows Instruments pane, select all of the JUNO-Gis outputs in the left-hand box. Control-click JUNO-Gi / 10 to de-select it. In the right-hand box, select Roland JUNO-Gi: Tone.

Using the JUNO-Gi with SONAR X1 LE and SONAR X1
The JUNO-Gi as SONARs Audio Interface
Listening to SONAR Through the JUNO-Gi
Once youve got the JUNO-Gi configured as SONARs audio interface, you can listen to SONAR
through your speakersby connecting the JUNO-Gis L/MONO and R
OUTPUT jacks to your mixer, powered speakers, or amplifier.
through headphonesby plugging your headphones into the
JUNO-Gis PHONES jack. In both cases, the JUNO-Gis VOLUME knob controls your listening level. If you cant hear SONAR at all through the JUNO-Gi, select the SONAR Master channel strip and check to make sure JUNO-Gi OUT is selected as its output.
Click JUNO-Gi / 10 so its the only output selected. In the right-hand box, select Roland JUNO-Gi: Rhythm.
Setting Up an Audio Track for Recording From the JUNO-Gi
In SONAR X1 LE or SONAR X1, create an audio track or select one thats not in use. Make sure the audio tracks Input Echo button is turned off since youll be listening to your live audio through the JUNO-Gi to avoid a timing lag, or latency. Click the Input popup and select Stereo JUNO-Gi IN. Input popup menu

Output popup menu

Checkmark the Save Changes for Next Session box so you dont have to import the JUNO-Gi definitions each time you start a new project. Click Apply, and then click Close. 11
Weve selected the JUNO-Gis stereo output, the most common thing to do. If you prefer, you can record either the left or ride side of its stereo output as a mono track instead. With two mono tones panned left and right within the JUNO-Gi, this is a good way to simultaneously record them on separate tracks. Its also a good way to record a mono track of live audio. 4
Choosing the JUNO-Gi Tone or Rhythm You Want
You use three popup menus in the middle of a MIDI tracks channel strip in setting up the track prior to sequencing. Channel popup Patch popup

Bank popup

Click the Output popup and select MASTER so the tracks output goes to the to SONARs Master outputs, or to the desired bus if youre grouping the audio track with others on a bus. Each of the JUNO-Gis 16 possible tones or rhythms is played by one of the 16 available MIDI channels. If you want each MIDI track to play its own sound, it has to be the only one using this MIDI channel.
Click the Channel popup and select a channel for the MIDI track to use.
As weve got SONAR configured, select 10: Roland JUNO-Gi:Rhythm if you want to use one of the JUNO-Gis drum or percussion kits.

The JUNO-Gi as SONARs Controller and Sound Module
In SONAR, you use a MIDI track when you want to sequence using the JUNO-Gi as your master controller, or use its tones and rhythms. Begin by creating a new MIDI track, or selecting one thats not already in use.
If you do want multiple MIDI tracks to use the same tone or rhythm, set them to use the same part.
Using the JUNO-Gi as Master MIDI Controller
As you set up for sequencing a new MIDI track:
It can be handy to have a list of the available tones and rhythms on hand as you select your sounds. For a PDF of this list, click here and download the JUNO-Gi Patch/Performance List. 2 3
Click the tracks Input popup menu. Select
MIDI Omnito receive on any
MIDI channel the JUNO-Gi uses.
Click the Bank popup and select the bank in the JUNO-Gi that contains the tone or rhythm you want the MIDI track to play. Click the Patch popup and select the desired tone or rhythm. If the JUNO-Gis in MIDI Controller mode, the MIDI tracks now ready to sequence using one of the JUNO-Gis tones or rhythms.
the specific MIDI channelshown
on the JUNO-Gis MIDI Controller mode screen, as described on page 7.

The Input popup menu

You can create a SONAR project template with your favorite JUNO-Gi tones and rhythms to save setup time when you start a new project.
Logic Pro and the JUNO-Gi Setting Up Logic Pro
Setting the Projects Sample Rate
Each Logic Pro project you work on using the JUNO-Gi must use a 44.1 kHz sample rate. To change a project samples rate: Settings button 1 Click and hold down the Settings button in the Arrange window tool bar, and select Audio. to open the Project Settings window. (If you prefer, you can do the same thing from the File menus Project Settings sub-menu.)
After you launch Logic Pro, click and hold down the Preferences button in the Arrange window tool bar, and select Audio. to open the Core Audio tab of the Preferences window. (If you prefer, you can do the same thing from the Logic Pro menu.) Set the Input and Output Device popup menus to JUNO-Gi 44.1kHz, and uncheck the 24-bit Recording and Software Monitoring boxes.
Set the Sample Rate popup menu to 44.100 kHz.
Well be listening to the JUNO-Gi and its live audio inputs through the JUNO-Gi. This is the best way to avoid any listening lag, or latency.

Close the Project Settings window.
If the Core Audio tabshown hereisnt visible, click its tab.
To avoid having to set your sample rate for each new project, consider saving a 44.1 kHz JUNO-Gi template project.
Using your browser, click this link and download the JUNO-Gi Logic Pro Multi-Instrument file that contains the JUNO-Gi Tones and Rhythms project. In Logic Pro, create a new project, or open the one with which you want to work.
If you had to make any changes in Step 2 above, click Apply Changes. Close the Preferences window.
If the JUNO-Gi is your only hardware synthor if youre new to Logic Proyou can work directly in this project. Consider saving it as a template. Once youve loaded the project or a copy of it, jump ahead to Step 3 in Choosing the JUNO-Gi Tone or Rhythm You Want on page 15 to learn how to choose its tones and rhythms.
Once the projects open, select Open from the File menu. When Logic Pro asks you if you want to close the current project, click Dont Close. Navigate to the JUNO-Gi Tones and Rhythms project file, and then click Open. Once the JUNO-Gi Tones and Rhythms project opens, select Environment from the Window menu. Select MIDI Instruments or MIDI Instr. from the Environment windows Layer popup menu.
Using Logic Pro with the JUNO-Gi
The JUNO-Gi as Logic Pros Audio Interface
Listening to Logic Pro Through the JUNO-Gi
Once youve got the JUNO-Gi configured as Logic Pros audio interface, you can listen to Logic Pro
JUNO-Gis PHONES jack. In both cases, the JUNO-Gis VOLUME knob controls your listening level.
Click on the JUNO-Gi Library multi-instrument by clicking its icon, as shown here.
In the Arrange window, click the + button above the track list to create a new stereo audio track in Logic Pro, selecting Input 1-2 from the Input menu, and unchecking the Input Monitoring box.
Select Copy from the Edit menu, and close the Environment window. Close the JUNO-Gi Tones and Rhythms projectwhen Logic Pro asks you if you want to save any changes youve made, click Dont Save. This puts you back in the project you created or opened in Step 2. (Logic Pro pauses to reload any audio the project needs.)
Click Create to finish creating your audio track.

Select Environment from the Window menu. Select MIDI Instruments or MIDI Instr. from the Layer popup menu. Select Paste from the Edit menu to add the JUNO-Gi Library multiinstrument to this project, and then close the Environment window.
Weve selected the JUNO-Gis stereo output. If you prefer, you can record either the left or ride side of its stereo output on a mono track instead by selecting Input 1 or 2, respectively. With two mono tones panned left and right within the JUNO-Gi, this is a good way to simultaneously record them on separate tracks. Its also a good way to record a mono track of live audio.
The JUNO-Gi as Logic Pros Controller/Sound Module
Logic Pro is set by default to listen MIDI data on any channel so theres nothing to set up. You can see Logic Pro listening to the JUNO-Gi by playing some notes and watching the activity monitor in the Logic Pro transport bar.
Heres how to get your Logic Pro track to automatically select the JUNO-Gi tone or rhythm you want each time you play your project.
You may want to have a list of the available tones and rhythms on hand as you select your sounds. For a PDF of this list, click here and download the JUNO-Gi Patch/Performance List. 1
Setting Up a MIDI Track to Play a JUNO-Gi Tone or Rhythm
In the Arrange window, click the + button above the track list to create a new External MIDI track.
After creating your External MIDI track in the Arrange window, make sure its MIDI parameters are visible in the Inspector by clicking their disclosure triangle. Check the Program checkbox. In the tracks header, double-click its icon to open the tracks object editor.

Disclosure triangle

Make sure Open Library is checked, too. Each of the JUNO-Gis 16 possible tones or rhythms is played by one of the 16 available MIDI channels. If you want each MIDI track to play its own sound, it has to be the only one using this MIDI channel.
In the opened Library pane, select JUNO-Gi library, and then the MIDI channel you want the MIDI track to use. Here weve selected the JUNO-Gis Channel 1.
Double-click here. Youll find the JUNO-Gis tones and rhythms in the object editor.

In the JUNO-Gi Patch/Performance List, you can see that each tone and rhythm has an LSB value.
If the JUNO-Gis in MIDI Controller mode, the Logic Pro tracks now ready to sequence using one of the JUNO-Gis tones or rhythms. 15
Youll find the tone in the Logic Pro bank that shares this number.
Ableton Live and the JUNO-Gi Setting Up Live
In addition, youll find JUNO-Gi rhythms in Bank 7.
From the Live menu, select Preferences. and click Audio along the left edge of the Preferences window to open the Audio tab.
Select the bank you want from the Bank popup menu.
Select the desired tone or rhythm from within that bank by clicking it in the object editor to highlight it. Close the object editor window when youre done.
From the Audio Input Device and Output Device popup menus, select JUNO-Gi 44.1kHz (2 In 2 Out).
You can also select sounds directly in the tracks Inspector pane, though its not as reliable a method as using the object editor. Lives sample rate is set by the JUNO-Gi. You can create a project template with your favorite JUNO-Gi tones and rhythms already set up to save time when you begin a new project.
Live has an easy-to-use system for setting the optimal buffer size, a key element in smooth audio-recording operations. To learn about it, see Learn how to set up your audio hardware in the Setup section of Lives built-in Help pane.
In the Preferences window, click the MIDI Sync tab. In the MIDI Ports area, activate
Create a new audio track or select an unused one. By default, a new audio track is set to Ext. In and Inputs 1/2, so the JUNO-Gis outputs are automatically routed to the track without your having to do anything.
incoming MIDIby clicking the Input: JUNO-Gi Track button so

it lights and reads On.

outgoing MIDIby clicking the Output: JUNO-Gi Track button so
Were using the JUNO-Gis stereo output here. If you prefer, you can record either the left or ride side of its stereo output as a mono track instead by selecting Input 1 or 2, respectively. With two mono tones panned left and right within the JUNO-Gi, this is a good way to simultaneously record them on separate tracks. Its also a good way to record a mono track of live audio.
Set the tracks Monitor section to Off so youre listening to the audio youre recording directly through the JUNO-Gi instead of via Lives outputs. This prevents any timing lag, or latency.
Close the Preferences window.
Heres what your audio tracks controls should look like.
Using Live with the JUNO-Gi
The JUNO-Gi as Lives Audio Interface
Listening to Live Through the JUNO-Gi
Once youve got the JUNO-Gi configured as Lives audio interface, you can listen to Live

The JUNO-Gi as Lives Controller/Sound Module
Since Live, by default, listens to all MIDI inputs on all channels automatically, theres nothing you need to dojust play your JUNO-Gi, and Lives MIDIaware tracks respond.
JUNO-Gis PHONES jack. In both cases, the JUNO-Gis VOLUME knob controls your listening level. 17
Setting Up a MIDI Track to Use a JUNO-Gi Tone or Rhythm
In the Notes area, youll find the
In the Arrangement View create a new MIDI track or select one. Click the MIDI To popup, and select JUNO-Gi.
Bank popup menuthat sets the Bank Select MSB value to be
sent to the JUNO-Gi. Live uses an offset of 1 for this, so add 1 to the patch-performance lists MSB value.
Click the Channel popup just below JUNO-Gi and select the MIDI channel you want to use for the tracks JUNO-Gi tone or rhythm. With the JUNO-G in MIDI Controller mode, youre ready to sequence using a JUNO-Gis tone or rhythm. The Bank Select MSB for this tone is 87, so weve entered 88.
Youll need the JUNO-Gi tone and rhythm list as you select sounds. Click here to download a PDF of the JUNO-Gi Patch/Performance List. 1
Sub-Bank popup menuthat sets the Bank Select LSB value. Live
also offsets the LSB, so add 1 to the listed LSB value as well.
Select the first measure of your MIDI track by dragging from left to right across it with your mouse in Arrangement View. The Bank Select LSB for this tone is 0, so weve entered 1.
Program popup menuthat sets the Program Change value to
be sent to the JUNO-Gi. (Theres no offset for this value.)
Select Insert MIDI Clip from the Create menu. Double-click the clip to show its settings in the Clip View. For our example, well select St. Piano 1, which requires Double-click here.
an MBS valueof 87, an LSB valueof 0, and a Program Change valueof 1.
Heres what it all looks like after we enter the Program Change value. Press the Play button so Live sends the MIDI messages to the JUNO-Gi and selects your tone or rhythm. To play the JUNO-Gi sound, click the tracks Arm button so it lights red. 18
After sequencing in Arrangement View, you can chop up your sequence into clips for use in Session view.
Why not create a live-set template with all of your favorite JUNO-Gi tones and rhythms already set up to save time when you begin a new project?

The End

We hope youve found this workshop helpful. Keep an eye out for other JUNO-Gi Workshop booklets available for downloading at www.RolandUS.com.