KC-60_e.book 1

Owners Manual
Thank you, and congratulations on your choice of the Roland Keyboard Amplifier KC-60.
These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owners manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. Before using this unit, carefully read the sections entitled IMPORTANT SAFETY INSTRUCTIONS (p. 2) USING THE UNIT SAFELY (p. 3p. 4) IMPORTANT NOTES (p. 5). Using a Speaker Stand (p. 10) This unit is equipped with a protection circuit. The protection circuit helps ensure safety by operating when excessive input continues for a long time while the device is at a location with a high ambient temperature. Sound drop-out may occur when the protection circuit is actuated during use. Please read through the documentation carefully to ensure correct use.

Features

This monitor-speaker amplifier is designed to provide high-quality sound for a variety of sources, including digital keyboards and sound modules. The two-way monitor features a 25-cm (10-inch) speaker and tweeter, and delivers a full 40 watts of high-power output. The input section features a three-channel mixer. Channel 1 is provided with an XLR connector in addition to supporting mic input. Features a SUBWOOFER OUT jack, allowing connection of a subwoofer for playback of even more impressive bass. Provided with an RCA phono type AUX IN jack, making it easy to connect devices such as CD and MD players. Master section includes a handy two-band equalizer for adjusting sound quality. Provided with a convenient headphones jack for use of the monitor at night.
Copyright 2002 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.

KC-60_e.book 2

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN
ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
WARNING - When using electric products, basic precautions should always be followed, including the following: 1. 2. 3. 4. 5. 6. 7. 8. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Unplug this apparatus during lightning storms or when unused for long periods of time. 13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
For the U.K. WARNING: THIS APPARATUS MUST BE EARTHED IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE. GREEN-AND-YELLOW: EARTH, BLUE: NEUTRAL, BROWN: LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or coloured GREEN or GREEN-AND-YELLOW. The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.

For EU Countries This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC.

KC-60_e.book 3

USING THE UNIT SAFELY
Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly. Used for instructions intended to alert the user to the risk of injury or material damage should the unit be used improperly. * Material damage refers other adverse effects respect to the home furnishings, as well animals or pets. to damage or caused with and all its to domestic
The symbol alerts the user to important instructions or warnings.The specific meaning of the symbol is determined by the design contained within the triangle. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger. The symbol alerts the user to items that must never be carried out (are forbidden). The specific thing that must not be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the unit must never be disassembled. The symbol alerts the user to things that must be carried out. The specific thing that must be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the powercord plug must be unplugged from the outlet.
Before using this unit, make sure to read the instructions below, and the Owners Manual....

001-50

The unit should be connected to a power supply only of the type described in the operating instructions, or as marked on the rear side of unit....
Connect mains plug of this model to a mains socket outlet with a protective earthing connection....
Do not open or perform any internal modifications on the unit....
Do not excessively twist or bend the power cord, nor place heavy objects on it. Doing so can damage the cord, producing severed elements and short circuits. Damaged cords are fire and shock hazards!....

Do not attempt to repair the unit, or replace parts within it (except when this manual provides specific instructions directing you to do so). Refer all servicing to your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the Information page....
Never use or store the unit in places that are: Subject to temperature extremes (e.g., direct sunlight in an enclosed vehicle, near a heating duct, on top of heat-generating equipment); or are Damp (e.g., baths, washrooms, on wet floors); or are Humid; or are Exposed to rain; or are Dusty; or are Subject to high levels of vibration....
This unit, either alone or in combination with an amplifier and headphones or speakers, may be capable of producing sound levels that could cause permanent hearing loss. Do not operate for a long period of time at a high volume level, or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should immediately stop using the unit, and consult an audiologist....
Do not allow any objects (e.g., flammable material, coins, pins); or liquids of any kind (water, soft drinks, etc.) to penetrate the unit.
Make sure you always have the unit placed so it is level and sure to remain stable. Never place it on stands that could wobble, or on inclined surfaces....

KC-60_e.book 4

Immediately turn the power off, remove the power cord from the outlet, and request servicing by your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the Information page when: The power-supply cord, or the plug has been damaged; or If smoke or unusual odor occurs Objects have fallen into, or liquid has been spilled onto the unit; or The unit has been exposed to rain (or otherwise has become wet); or The unit does not appear to operate normally or exhibits a marked change in performance....
The unit should be located so that its location or position does not interfere with its proper ventilation....
Always grasp only the plug on the power-supply cord when plugging into, or unplugging from an outlet....
In households with small children, an adult should provide supervision until the child is capable of following all the rules essential for the safe operation of the unit....
At regular intervals, you should unplug the power plug and clean it by using a dry cloth to wipe all dust and other accumulations away from its prongs. Also, disconnect the power plug from the power outlet whenever the unit is to remain unused for an extended period of time. Any accumulation of dust between the power plug and the power outlet can result in poor insulation and lead to fire....
Protect the unit from strong impact. (Do not drop it!)....
Try to prevent cords and cables from becoming entangled. Also, all cords and cables should be placed so they are out of the reach of children....

Never climb on top of, nor place heavy objects on the unit....
Do not force the units power-supply cord to share an outlet with an unreasonable number of other devices. Be especially careful when using extension cordsthe total power used by all devices you have connected to the extension cords outlet must never exceed the power rating (watts/amperes) for the extension cord. Excessive loads can cause the insulation on the cord to heat up and eventually melt through....
Never handle the power cord or its plug with wet hands when plugging into, or unplugging from, an outlet....
Before moving the unit, disconnect the power plug from the outlet, and pull out all cords from external devices....
Before using the unit in a foreign country, consult with your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the Information page....
Before cleaning the unit, turn off the power and unplug the power cord from the outlet (p. 9)....
Do not put anything that contains water (e.g., flower vases) on this unit. Also, avoid the use of insecticides, perfumes, alcohol, nail polish, spray cans, etc., near the unit. Swiftly wipe away any liquid that spills on the unit using a dry, soft cloth....
Whenever you suspect the possibility of lightning in your area, pull the plug on the power cord out of the outlet....
Do not remove the speaker grille and speaker by any means. Speaker not user replaceable. Shock hazardous voltages and currents are present inside the enclosure....

KC-60_e.book 5

IMPORTANT NOTES

291b 359

In addition to the items listed under IMPORTANT SAFETY INSTRUCTIONS and USING THE UNIT SAFELY on pages 24, please read and observe the following:
Do not paste stickers, decals, or the like to this instrument. Peeling such matter off the instrument may damage the exterior finish.

Maintenance

Power Supply
Do not connect this unit to same electrical outlet that is being used by an electrical appliance that is controlled by an inverter (such as a refrigerator, washing machine, microwave oven, or air conditioner), or that contains a motor. Depending on the way in which the electrical appliance is used, power supply noise may cause this unit to malfunction or may produce audible noise. If it is not practical to use a separate electrical outlet, connect a power supply noise filter between this unit and the electrical outlet.
For everyday cleaning wipe the unit with a soft, dry cloth or one that has been slightly dampened with water. To remove stubborn dirt, use a cloth impregnated with a mild, non-abrasive detergent. Afterwards, be sure to wipe the unit thoroughly with a soft, dry cloth.

Never use benzine, thinners, alcohol or solvents of any kind, to avoid the possibility of discoloration and/or deformation.
For routine care of the carpeted surfaces, use a brush with stiff bristles.
Before connecting this unit to other devices, turn off the power to all units. This will help prevent malfunctions and/or damage to speakers or other devices.

Additional Precautions

Although the LEDs are switched off when the POWER switch is switched off, this does not mean that the unit has been completely disconnected from the source of power. If you need to turn off the power completely, first turn off the POWER switch, then unplug the power cord from the power outlet. For this reason, the outlet into which you choose to connect the power cords plug should be one that is within easy reach and readily accessible.
Use a reasonable amount of care when using the units buttons, sliders, or other controls; and when using its jacks and connectors. Rough handling can lead to malfunctions.
When connecting / disconnecting all cables, grasp the connector itselfnever pull on the cable. This way you will avoid causing shorts, or damage to the cables internal elements.
A small amount of heat will radiate from the unit during normal operation.

Placement

Using the unit near power amplifiers (or other equipment containing large power transformers) may induce hum. To alleviate the problem, change the orientation of this unit; or move it farther away from the source of interference.
To avoid disturbing your neighbors, try to keep the unit's volume at reasonable levels. You may prefer to use headphones, so you do not need to be concerned about those around you (especially when it is late at night).
When you need to transport the unit, package it in the box (including padding) that it came in, if possible. Otherwise, you will need to use equivalent packaging materials.
This device may interfere with radio and television reception. Do not use this device in the vicinity of such receivers.
Noise may be produced if wireless communications devices, such as cell phones, are operated in the vicinity of this unit. Such noise could occur when receiving or initiating a call, or while conversing. Should you experience such problems, you should relocate such wireless devices so they are at a greater distance from this unit, or switch them off.
Some connection cables contain resistors. Do not use cables that incorporate resistors for connecting to this unit. The use of such cables can cause the sound level to be extremely low, or impossible to hear. For information on cable specifications, contact the manufacturer of the cable.
When transporting and storing the KC-60, be sure to secure the AC cord to the cord hook on the rear of the main unit.

Do not expose the unit to direct sunlight, place it near devices that radiate heat, leave it inside an enclosed vehicle, or otherwise subject it to temperature extremes. Also, do not allow lighting devices that normally are used while their light source is very close to the unit (such as a piano light), or powerful spotlights to shine upon the same area of the unit for extended periods of time. Excessive heat can deform or discolor the unit.
When moved from one location to another where the temperature and/or humidity is very different, water droplets (condensation) may form inside the unit. Damage or malfunction may result if you attempt to use the unit in this condition. Therefore, before using the unit, you must allow it to stand for several hours, until the condensation has completely evaporated.
Do not allow rubber, vinyl, or similar materials to remain on the unit for long periods of time. Such objects can discolor or otherwise harmfully affect the finish.

KC-60_e.book 6

Panel Descriptions

Control Panel

fig.01

Jack Panel

CHANNEL CONTROL
1. CH 1 knob / CH 1 Input Jacks
In addition to a 1/4 phone jack, this channel is equipped with a balanced XLR connector, useful for connecting microphones. This accepts input levels ranging from mic input (-50 dBu) to line level from sound modules and other equipment (-20 dBu).

5. VOLUME Knob

This adjusts the total volume level of the units internal speaker. The SUBWOOFER OUT output is also changed. When connecting headphones, adjust the headphone volume level. * The VOLUME knob do not affect the line outs.

6. PHONES Jack

This is for connecting headphones. The units speakers are deactivated when headphones are plugged in. Also, no signals are output from SUBWOOFER OUT (p. 7). * Always be sure to lower the VOLUME knob to 0 whenever connecting and disconnecting headphones. * Although the PHONES jack accepts stereo plugs, the audio
2. CH 2 and CH 3 knobs / CH 2 and CH 3 Input Jacks
Use these for connecting keyboards, sound modules, and other devices. They accept line level input (-20 dBu).

MASTER CONTROL

These adjust the tone and volume level for the built-in speakers or for headphones.

output is mono.

3. LOW Knob
This adjusts the level of the bass range.

4. HIGH Knob

This adjusts the level of the treble range.

KC-60_e.book 7

7. Power Indicator
This indicator illuminates when the power is on.

8. POWER Switch

This switches the power on and off. * Always be sure to lower the volume on the KC-60 and any connected equipment to 0 whenever turning the power on or off. * This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally. Slight pop noise may come from the speakers when the power is switched on, but this does not indicate a problem. * Refer to p. 9 for the order in which to turn the power to connected devices on and off.
* If you need to turn off the power completely, first turn off the POWER switch, then unplug the power cord from the power outlet. Refer to Power Supply (p. 5).

9. AUX IN Jacks

These are RCA phono type input jacks. You use these to connect equipment such as CD and MD players, and have them sound along with the equipment connected to channel 1 through channel 3. They accept level input of -10 dBu. * To adjust the volume level of equipment connected to the AUX IN jacks, use the controls on such equipment. * Even though the input signal may be in stereo, the signal is mixed internally to a mono signal.

10.LINE OUT Jack

Connect mixers, recorders, and other such equipment here. This output jack provides +4 dBu line level output. * The MASTER CONTROL knobs (the LOW, HIGH, and VOLUME controls) do not affect the output from LINE OUT.

11.SUBWOOFER OUT Jack

This lets you play even more powerful bass by connecting a powered subwoofer. Provides full-range output, at an output level +4 dBu. You can use the MASTER CONTROL knobs (LOW, HIGH, and VOLUME) to adjust the tone and volume level of the signals output from SUBWOOFER OUT. * No signals are output from SUBWOOFER OUT when headphones are connected.

KC-60_e.book 8

Making the Connections
Refer to the figure shown below to connect the KC-60 and the other equipment.

fig.03

Rear Panel
Stereo Headphone Microphone

OUTPUT

CD Player Subwoofer (With built-in amp) Mixer Drum Machine

Keyboard

Here is an example of a setup that makes full use of the KC60s mixer and monitor functions. A microphone is input to CH 1, which accepts mic level input. Connect a keyboard, recorder, or other soundgenerating device to the CH 2 and CH 3 inputs.
* Howling could be produced depending on the location of microphone relative to speakers. This can be remedied by: 1. Changing the orientation of the microphone. 2. Relocating microphone at a greater distance from the speaker. 3. Lowering volume levels. * When connection cables with resistors are used, the volume level of equipment connected to the inputs (CH 1 through CH 3 and AUX IN) may be low. If this happens, use connection cables that do not contain resistors, such as those from the Roland PCS series.
* To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. Set all of the KC60s channel volume knobs as well as the VOLUME knob to zero.
* This instrument is equipped with balanced (XLR) type connectors. Wiring diagrams for these jacks are shown below. Make connections after first checking the wiring diagrams of other equipment you intend to connect.

fig.04

KC-60_e.book 9
Switching the Power On and Off
About the Volume-level Settings
In order to get optimum sound from the KC-60 when performing, set the volume as described below. 1. Operate the CH 1 through CH 3 volume knobs to adjust the volume level for channels 1 through 3.

fig.11

* Once the connections have been completed (p. 8), turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices. 1. Make sure that all volume controls on the KC-60 and connected devices are set to 0. 2. Turn on all the devices connected to the KC-60s input jacks (CH 1 through CH 3 and AUX IN). 3. Turn on the KC-60. 4. Switch on any equipment connected to the KC-60s LINE OUT or SUBWOOFER OUT jacks. 5. Adjust the volume levels for the devices. 6. Before switching off the power, lower the volume on each of the devices in your system and then TURN OFF the devices in the reverse order to which they were switched on.

Adjust the volume balance for channels 1 through 3 at this time. * To adjust the volume level of equipment connected to the AUX IN jacks, use the controls on such equipment. 2. Adjust the LOW and HIGH knobs to obtain the tone you want. 3. Use the VOLUME knob to adjust the overall volume level.

fig.12

* This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally.
* Always make sure to have the volume level turned down before switching on power. Even with the volume all the way down, you may still hear some sound when the power is switched on, but this is normal, and does not indicate a malfunction.
* If the sound is distorted, lower the CH 1 through CH 3 volume knobs, VOLUME knob and/or the volume knobs for devices connected to the input jacks (CH 1 through CH 3 and AUX IN).

KC-60_e.book 10

Using a Speaker Stand
By using a speaker stand, you can mount the KC-60 at the optimal height for use as a monitor speaker or simple PA device.

fig. Caution

The KC-60 is designed to be used only with speaker stands whose dimensions meet the specifications described below. Do not use it with a speaker stand that does not meet the following specifications.

fig.05

Before use, adjust the speaker stand to a height of 165 cm (65) or less and a leg spread of 120 cm (47-1/4) or more, as shown in the figure below.

fig.08\

Diameter: 3.8 cm (1-1/2)

165 cm (65) or less

Leg spread: 120 cm (47-1/4) or more

fig.06_e

120 cm (47-1/4) or more
Using a speaker stand that does not meet the specifications at left or that is adjusted to a height over
Diam eter: 136 c m or mo (53-9/16 ) re
165 cm (65), or a leg spread of less than 120 cm (47-1/4) may result in damage to equipment or injury due to the stand tipping over. When using KC-60 with a speaker stand, the speaker stand must be carefully placed so it is level and sure to remain stable.
Cables connected to KC-60 should be given enough slack to prevent accidents that might result from someone tripping over them. To prevent accidents due to falls, do not place any object on the KC-60 when its mounted on a speaker stand. Always have at least one other person assist you when mounting the KC-60 on a speaker stand, or when adjusting the height of the stand while the KC-60 remains mounted on it.

When deciding on a stand to use with the KC-60, make sure to pick one that is capable of supporting its weight.

KC-60_e.book 11

Appendices

Block Diagram

CH1 MIC/LINE BALANCED

LINE OUT

COLD CH 1 VOL
CH1 MIC/LINE SUBWOOFER OUT CH 2 LINE

CH 2 VOL

PHONES

CH 3 LINE TWEETER

CH 3 VOL HIGH PASS FILTER

AUX IN L

MASTER VOL LOW HIGH POWER AMP

WOOFER

AUX IN R

SPEAKER

Main Specifications

Rated Power Output

Connectors
Channel 1 Input Jack (XLR type, 1/4 phone type) Channel 2 Input Jack (1/4 phone type) Channel 3 Input Jack (1/4 phone type) AUX IN Jack (RCA phono type) LINE OUT Jack (1/4 phone type) SUBWOOFER OUT Jack (1/4 phone type) PHONES Jack (1/4 TRS phone type, mono signal output)
Nominal Input Level (1 kHz)
Input Channel 1 (MIC/LINE): Channel 2, 3 (LINE): AUX IN: -50 -20 dBu -20 dBu -10 dBu +4 dBu +4 dBu

Nominal Output Level

LINE OUT: SUBWOOFER OUT: * 0 dBu = 0.775 Vrms
AC 117 V, AC 230 V, AC 240 V

Power Consumption

Speakers
25 cm (10 inches) x 1 Tweeter x 1

Dimensions

420 (W) x 300 (D) x 410 (H) mm 16-9/16 (W) x 11-13/16 (D) x 16-3/16 (H) inches

Controls

Channel 1 (MIC/LINE) Volume Knob Channel 2 (LINE) Volume Knob Channel 3 (LINE) Volume Knob Equalizer: LOW Knob, HIGH Knob VOLUME Knob POWER Switch

Weight

12.5 kg 27 lbs 9 oz

Accessory

Indicator
* In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.

KC-60_e.book 12

SD000223

Quality Amplifiers for Every Keyboard Application

MOBILE CUBE

Battery Powered Stereo Amplifier
Keyboard Amplifier KC Series Catalog

SA-300

Stage Amplifier
The "KC" prefix is synonymous with high-quality amplification the world standard for keyboardists.
KC-series amps were developed to address the diverse performance needs of professional keyboardists, and are used in a wide range of applications. With mixing functions such as mic and audio inputs and pure, high-powered amplification of keyboard performances, KC amps embody the keyboardist's dream. The compact and battery-powered KC-110 stereo amp is the newest addition to the ever-expanding KC family.
n The All-Purpose Portable Amp
lBattery-powered amplifier for anyone, anywhere, anytime lInputs for microphone, stereo-instrument, and stereo AUX; headphone output lBuilt-in stereo reverb/chorus, distortion, and more
nDimensions 280 (W) x 108 (D) x 177 (H) mm 11-1/16 (W) x 4-1/4 (D) x 7 (H) inches nWeight 2.5 kg / 5 lbs. 9 oz.
n Four-channel Portable Stereo PA System
lLightweight (easy to carry) yet powerful lLow Boost switch for powerful low-end lWide Switch for big stereo effect, plus 3-band EQ lAdvanced Anti-Feedback function
nDimensions SA-300: 456 (W) x 343 (D) x 297 (H) mm / 18 (W) x 13-9/16 (D) x 11-3/4 (H) inches SA-300W: 456 (W) x 325 (D) x 510 (H) mm / 18 (W) x 12-13/16 (D) x 20-1/8 inches nWeight SA-300: 11.5 kg / 25 lbs. 6 oz. SA-300W: 10.5 kg / 23 lbs. 3 oz.

BA-330

Stereo Portable Amplifier

SA-1000

n Portable Stereo Digital PA System
lFour-channel configuration: two channels for mic/instruments plus two channels for stereo inputs lPowerful high-quality stereo sound for audiences of up to 80 people lBuilt-in effects: EQ, reverb, delay, and advanced Intelligent Anti-Feedback function
nDimensions 415 (W) x 357 (D) x 509 (H) mm 16-3/8 (W) x 14-1/16 (D) x 20-1/16 (H) inches nWeight 13.8 kg / 30 lbs. 7 oz.
n Compact, High Power Superior Stage Amp
Especially Crafted for Organs and Digital Pianos
lOrgan Enhance button for a vigorous mid- and low-frequency enhancement while crystal highs remain lThe built-in Anti-Feedback function automatically cancels unpleasant howling lStereo Link enables two SA-1000s to be cascaded for a total of 700 watts of power
nDimensions SA-1000: 456 (W) x 343 (D) x 297 (H) mm / 18 (W) x 13-9/16 (D) x 11-3/4 (H) inches SA-1000W: 456 (W) x 325 (D) x 560 (H) mm / 18 (W) x 12-13/16 (D) x 22-1/16 inches nWeight SA-1000: 11.5 kg / 25 lbs. 6 oz. SA-1000W: 11.5 kg / 25 lbs. 6 oz.

CUBE Monitor

n Options
200-watt powered subwoofer for use with Roland's KC-Series amps For optimal projection, the KC-60/ KC-110/KC-150, the BA-330, and the SA-300* can be mounted on this companion speaker stand, which telescopes for custom height adjustment.
n Multi-Purpose Portable Mixing Monitor
l30-watt 6.5" coaxial 2-way speaker with stereo preamp lThree input channels, with one XLR input for mic/line and two additional Aux inputs lStereo Link function for stereo connection, which allows a total of eight stereo inputs and two mono mic/line inputs
nDimensions 214 (W) x 238 (D) x 275 (H) mm 8-7/16 (W) x 9-3/8 (D) x 10-7/8 (H) inches nWeight 5.6 kg / 12 lbs. 6 oz.

Powered Subwoofer

nDimensions 438 (W) x 440 (D) x 460 (H) mm 17-1/4 (W) x 17-3/8 (D) x 18-1/8 (H) inches nWeight 23.0 kg / 50 lbs. 12 oz.

ST-A95

Speaker Stand

*Compatible with the SA-300 upper unit only.
High-Power, High-Quality Amplification
KC amps deliver high-quality sound with power to handle the demands of keyboards, from the sharpest and fattest synth sounds to dramatic, delicate piano performances.

HIGH QUALITY MIXING

Guitar Keyboard V-Drums
Effects CH4 CH3 CH2 CH1 AUX IN/ MONITOR IN
Professional, Heavy-Duty Specs
From its sturdy cabinet construction to its punched-metal front screen, corner protectors, and tough, fabric-covered cabinet, the KC series screams heavy duty.

HEAVY DUTY

Built-in Mixing
In addition to its keyboard handling, KC amps support a variety of inputs microphones, rhythm machines, audio gear, and more.
Expandability with Stereo Link
The Stereo Link* feature lets you expand easily. Just connect two KC series amps together with a standard cable for high-output stereo amplification.
*Supported models: KC-880, KC-550, and KC-350

STEREO LINK

OUT-L IN
Visit us online at www.Roland.com
All specifications and appearances are subject to change without notice. Roland is registered trademark of Roland Corporation in the United States and/or other countries. All trademarks are the property of their respective companies.

Audio Player

KC-880

IN OUT-L

OUT-R IN
nExample of how to use your KC-880 as a PA system.
Printed in Japan Feb. 10 RAM-4557 GR-GEN-

STEREO KC

SERIES l KC-880 l KC-110
SERIES l KC-550 l KC-350 l KC-150 l KC-60
The KC series stereo specs richly expand the aural field. The KC-880 is high powered, and the KC-110 is battery powered.
KC-series amplifiers are a standard among professionals, supporting a broad range of keyboard applications. The line-up provides possibilities for stage monitoring, playing at home, and even as a stereo PA system.
The flagship KC amp, with 320 watts of stage-rumbling power True stereo design with support for five inputs

l160W+160W for high-power 320W output lFull stereo speaker configuration with two horn tweeters and 30cm woofers; expandable with Stereo Link lNo-compromise sound quality with customized speakers lFive inputs with mixer control, including 4-channel stereo input and an AUX input lAUX IN with monitor feature for playing to a click track, etc. lHigh-quality effects, including chorus, tremolo, rotary, and reverb

n Control Panel

The advantages of stereo KC models in a battery-powered body A compact keyboard amp that you can use anywhere, any time!
lUse this as a personal amp, a live monitor, or a compact PA system lDual-mode power with support for eight AA batteries* and AC adaptor lEquipped with two high-quality woofers and tweeters for stereo sound lConnect two stereo and mic inputs with full mix control lAUX IN for CD/MP3 players, etc. lReverb, chorus, wide, and 2-band EQ
* Battery life: approx. 7 hours of continuous operation. Nickel-metal hydride batteries: approx. 8 hours (battery life may vary depending on conditions).
Large 38cm woofer and horn tweeter for dramatic sound 4-channel stereo input, AUX IN, and Shape switch
l High-power 180W output l Clear, full-range sound with large 38cm woofer and horn tweeter l 3-band EQ plus Shape switch to emphasize lows and highs l 4-channel stereo mixer for controlling one mic or instrument input and three instrument inputs l I/O extras include AUX IN (for CD/MP3 players, etc.), Line output, Subwoofer output l Output Select switch for choosing the destination of channel 4
120-watt power through a horn tweeter and 30cm woofer High-end features such as four stereo channels and AUX IN
lPowerful 120W output lHigh-quality, full-range amplification through horn tweeter and 30cm woofer l4-channel stereo mixer for controlling one mic or instrument input and three instrument inputs lI/O extras include AUX IN (for CD/MP3 players, etc.), XLR/Line output, Subwoofer output; Output Select switch for choosing the destination of channel 4 l3-band EQ plus Shape switch to emphasize lows and highs
65-watt sound through a quality tweeter and 30cm woofer 4-channel input, AUX IN, and stand-mount compatibility*
l65W output lWide-range amplification delivered on a two-way tweeter and 30cm woofer configuration l4-channel stereo mixer for controlling one mic or instrument input and three instrument inputs lAUX IN (for CD/MP3 players, etc.), Subwoofer Output, 2-band EQ lChannel 4 equipped with a Monitor function for stage-monitoring applications lSeparately-sold speaker stand to expand your setup possibilities
40-watt sound from a tweeter and 25cm woofer 3-channel input, AUX IN, and stand-mount compatibility*
l40W in a compact body a great choice for your personal studio lWide-range amplification delivered on a two-way tweeter and 25cm woofer configuration l3-channel stereo mixer for controlling one mic or instrument input and two instrument inputs lAUX IN (for CD/MP3 players, etc.), Subwoofer Output, 2-band EQ lSeparately-sold speaker stand to expand your setup possibilities

Unlimited freedom with AA batteries
n Control Panel nRear Panel

nRear Panel nRear Panel

nRear Panel
With optional ST-A95 speaker stand
* With optional ST-A95 speaker stand
Rated Power Output Speakers
320 W (160 W +160 W) 30 cm (12 inches) Woofer x 2, Horn Tweeter x 2 CH1 Input (XLR type) CH1-4 Input L /MONO, R (1/4" phone type) AUX 1 Input L /MONO, R (1/4" phone type) AUX 2 Input L, R (RCA phono type) AUX 3 Input (Stereo miniature phone type) LINE OUT L /MONO, R (1/4" phone type) LINE OUT L, R (XLR type) Stereo 1/4" phone type Yes No Reverb, Chorus, Tremolo, Rotary, 3 Band EQ AC 117 /220 /230 /240 V 98 W 759 (W) x 470 (D) x 534 (H, without caster)/ 585 (H, with caster) mm 29-15/16 (W) x 18-9/16 (D) x 21-1/16 (H, without caster)/ 23-1/16 (H, with caster) inches 44.0 kg / 97 lbs. 1 oz. Nominal Input Level (@1 kHz): CH1 (MIC/LINE) 50 to 20 dBu, CH2-4 (LINE) 20 dBu, AUX IN/MONITOR IN 20 dBu, STEREO LINK IN 0 dBu Nominal Output Level (@1 kHz): LINE OUT (XLR type, Phone type) +4 dBu, STEREO LINK OUT 0 dBu Caster x 4 No
30 W (15 W + 15 W) when using the AC adaptor / 20 W (10 W + 10 W) when using the Alkaline batteries 16 cm (6.5 inches) x 2, Tweeter x 2 CH1 Input (XLR type, 1/4" phone type) CH2-3 Input L / MONO, R (1/4" phone type) AUX IN (RCA phono type, Stereo miniature phone type) LINE OUT L / MONO, R (1/4" phone type) Stereo 1/4" phone type No No Reverb, Chorus, Wide, 2 Band EQ AC Adaptor (included, DC 13 V), dry battery LR6 (AA) type (alkaline) x 8, or rechargeable battery HR6 (AA) type (Nickel-metal hydride) x mA 420 (W) x 244 (D) x 320 (H) mm 16-9/16 (W) x 9-5/8 (D) x 12-5/8 (H) inches 7.3 kg / 16 lbs. 2 oz. (excluding batteries) Nominal Input Level (1 kHz): CH1 (MIC / LINE) 50 to 20 dBu, CH2 / 3 (LINE) 20 dBu, AUX IN 10 dBu Nominal Output Level: LINE OUT 10 dBu AC Adaptor Yes
180 W 38 cm (15 inches) x 1, Horn Tweeter x 1 CH1 Input (XLR type) CH1-4 Input L /MONO, R (1/4" phone type) AUX IN (RCA phono type) LINE OUT L /MONO (XLR type, 1/4" phone type) LINE OUT R (XLR type, 1/4" phone type) Stereo 1/4" phone type Yes Yes 3 Band EQ, Shape Switch AC 115 /117 /220 /230 /240 V 135 W 590 (W) x 445 (D) x 536 (H, without caster)/590 (H, with caster) mm 23-1/4 (W) x 17-9/16 (D) x 21-1/8 (H, without caster)/23-1/4 (H, with caster) inches 29.0 kg / 63 lbs. 15 oz. Nominal Input Level (1 kHz): CH1 (MIC/LINE) 50 to 20 dBu, CH2-4 (LINE) 20 dBu, STEREO LINK IN 0 dBu, AUX IN 10 dBu Nominal Output Level (1 kHz): LINE OUT +4 dBu, STEREO LINK OUT 0 dBu, SUBWOOFER OUT +4 dBu Caster x 4 No

120 W 30 cm (12 inches) x 1, Horn Tweeter x 1 CH1 Input (XLR type) CH1-4 Input L/ MONO, R (1/4" phone type) AUX IN (RCA phono type) LINE OUT L/MONO (1/4" phone type) LINE OUT R (1/4" phone type) Stereo 1/4" phone type Yes Yes 3 Band EQ, Shape Switch AC 115/117/ 220/230/240 V 100 W 490 (W) x 385 (D) x 470 (H) mm 19-5/16 (W) x 15-3/16 (D) x 18-9/16 (H) inches 22.0 kg / 48 lbs. 9 oz. Nominal Input Level (1 kHz): CH1 (MIC/LINE) 50 to 20 dBu, CH2-4 (LINE) 20 dBu, STEREO LINK IN 0 dBu, AUX IN 10 dBu Nominal Output Level (1 kHz): LINE OUT +4 dBu, STEREO LINK OUT 0 dBu, SUBWOOFER OUT +4 dBu No
65 W 30 cm (12 inches) x 1, Tweeter x 1 CH1 Input (XLR type, 1/4" phone type) CH2-4 Input (1/4" phone type) AUX IN (RCA phono type) LINE OUT (1/4" phone type) Stereo 1/4" phone type (mono signal output) No Yes 2 Band EQ AC 115/ 117/230/240 V 55 W 480 (W) x 295 (D) x 435 (H) mm 18-15/16 (W) x 11-5/8 (D) x 17-1/8 (H) inches 14.0 kg / 30 lbs. 14 oz. Nominal Input Level (1 kHz): CH1 (MIC/LINE) 50 to 20 dBu, CH2-4 (LINE) 20 dBu, AUX IN 10 dBu Nominal Output Level (1 kHz): LINE OUT +4 dBu, SUBWOOFER OUT +4 dBu Yes
40 W 25 cm (10 inches) x 1, Tweeter x 1 CH1 Input (XLR type, 1/4" phone type) CH2-3 Input (1/4" phone type) AUX IN (RCA phono type) LINE OUT (1/4" phone type) Stereo 1/4" phone type (mono signal output) No Yes 2 Band EQ AC 115/117/230/240 V 45 W 415 (W) x 290 (D) x 405 (H) mm 16-3/8 (W) x 11-7/16 (D) x 16 (H) inches 12.0 kg / 26 lbs. 8 oz. Nominal Input Level (1 kHz): CH1 (MIC/LINE) 50 to 20 dBu, CH2-3 (LINE) 20 dBu, AUX IN 10 dBu Nominal Output Level (1 kHz): LINE OUT +4 dBu, SUBWOOFER OUT +4 dBu Yes

* 0dbu=0.775Vrms

Input Connectors
Output Connectors Headphone Jack Stereo Link Output Subwoofer Out Effects Power Supply Current Draw/Power Consumption Dimensions Weight Other Accessory Speaker Stand Adaptor